Embed Size (px)
Citation preview
August 4-9, 2013
Waikoloa, Hawaii USATHE 8TH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING
CALL FOR PAPERS
About PRICM-8This triennial conference is the eighth in a series of international forums dedicated to advanced materials and processing. The conference is jointly organized and sponsored by the Chinese Society for Metals (CSM), the Japan Institute of Metals (JIM), the Korean Institute of Metals and Materials (KIM), Materials Australia (MA), and The Minerals, Metals & Materials Society (TMS), with each society taking a turn as host. TMS will be the host organization for PRICM-8, which will be held at the Hilton Waikoloa Village in Waikoloa, Hawaii, situated in the middle of the Pacific Rim Region on the Kohala Coast on the Big Island of Hawaii.
The purpose of PRICM is to provide an attractive forum for the exchange of scientific and technological information on materials and processing. Topics include:
• Materials for Energy • Materials for the Environment • Advanced High-Temperature Structural Materials • Advanced Steels and Processing • Light Metals and Alloys • Composites and Hybrid Materials • Biomaterials, Smart Materials, and Structures • Rare Earth, Electronic, and Magnetic Materials• Thin Films and Surface Engineering • Materials and Processes for Enhanced Performance • Solidification, Deformation and Related Processing • Modeling and Simulation of Processes, Microstructures, and Behavior • Bulk Metallic Glasses, Nanocrystalline Materials, and Ultrafine-Grain Materials• Advanced Materials Characterization and Evaluation • Advanced Neutron and Synchrotron Studies of Materials
Organized and Sponsored by:
The Chinese Society for Metals (CSM)The Japan Institute of Metals (JIM)The Korean Institute of Metals and Materials (KIM)Materials Australia (MA)The Minerals, Metals & Materials Society (TMS)
Abstract Submission Deadline Extended: January 31, 2013www.programmaster.org/PRICM8 • www.tms.org/meetings/pricm8
For general information regarding PRICM-8, contact:
TMS Meeting Services184 Thorn Hill RoadWarrendale, PA 15086-7514 USATelephone (724) 776-9000, Ext. 243Fax: (724)776-3770Email: [email protected]
To participate, contact your Regional Conference Organizer Representative.
THE 8TH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING
About the Venue
PRICM-8 is being held at the Hilton Waikoloa Village in Waikoloa, Hawaii,
providing convenient access to the various Pacific Rim countries.
Conference Honorary Chair • Elizabeth Holm, Sandia National Laboratories [[email protected]]
Conference Organizing Chair • Fernand Marquis, Naval Postgraduate School [[email protected]]
TMS Organizational Liaison • James Robinson, TMS [[email protected]] • Louise Wallach, TMS [[email protected]]
CHINESE SOCIETY FOR METALS (CSM) APPOINTMENTSCSM In-Country Technical Representative • Chengjia Shang, University of Science and Technology Beijing [[email protected]]
CSM International Organizing Committee Members • Pei Zhao, The Chinese Society for Metals [[email protected]] • Xishan Xie, University of Science and Technology Beijing [[email protected]] • Yafang Han, Beijing Institute of Aeronautical Materials [[email protected]]
CSM International Advisory Board Members • Changxu Shi, Chinese Academy of Sciences [[email protected]] • Yuqing Weng, Chinese Society for Metals [[email protected]] • Zengyong Zhong, Chinese Society for Metals [[email protected]]
JAPAN INSTITUTE OF METALS (JIM) APPOINTMENTSJIM In-Country Technical Representative • Tomoyuki Kakeshita, Osaka University [[email protected]]
JIM International Organizing Committee Members • Tadashi Furuhara, Institute of Materials Research, Tohoku University [[email protected]] • Haruyuki Inui, Kyoto University [[email protected]]
JIM International Advisory Board Members • Yoshinao Mishima, Tokyo Institute of Technology [[email protected]] • Shuichi Miyazaki, University of Tsukuba [[email protected]]
KOREAN INSTITUTE OF METALS AND MATERIALS (KIM) APPOINTMENTSKIM In-country Technical Representative • Do Hyang Kim, Yonsei University [[email protected]]
KIM International Organizing Committee Members • Dong Hyuk Shin, Hanyang University [[email protected]] • Kwang Seon Shin, Seoul National University [[email protected]] • Chong Soo Lee, POSTECH [[email protected]]
KIM International Advisory Board Members • Young Won Chang, POSTECH [[email protected]] • Nack Joon Kim, POSTECH [[email protected]] • Jun Hwa Hong, Korea Atomic Energy Research Institute [[email protected]]
MATERIALS AUSTRALIA (MA) APPOINTMENTSMA In-Country Technical Representative • Jian-Feng Nie, Monash University [[email protected]]
MA International Organizing Committee Members • Allan Morton, CSIRO [[email protected]] • Simon Ringer, The University of Sydney [[email protected]] • Mal Couper, Monash University [[email protected]]
MA International Advisory Board Members • George Collins, CAST CRC [[email protected]] • Peter Hodgson, Deakin University [[email protected]] • Jim Williams, The Australian National University [[email protected]]
THE MINERALS, METALS & MATERIALS SOCIETY (TMS) APPOINTMENTSTMS In-Country Representative • Fernand Marquis, Naval Postgraduate School [[email protected]]
TMS International Organizing Committee Members • Marc Meyers, University of California at San Diego [[email protected]] • Naresh Thadhani, Georgia Institute of Technology [[email protected]]
TMS International Advisory Board Members • Diran Apelian, Worcester Polytechnic Institute [[email protected]] • David Bourell, University of Texas [[email protected]] • George T. “Rusty” Gray, Los Alamos National Laboratory [[email protected]]
Pricm8 Symposia Organizers
Pricm8 Symposia Organizers Continued on next page
THE 8TH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING
Materials for Energy •ShixueDou,UniversityofWollongong,[email protected] •AkihikoKimura,KyotoUniversity, [email protected] •ZHOUShaoxiong,CentralIronandSteelResearch Institute, [email protected] •YoungHwanCho,KoreanInstituteofScienceand Technology,[email protected] •RenkunChen,UniversityofCaliforniaSanDiego, [email protected]
Materials for the Environment •RachelCaruso,TheUniversityofMelbourne, [email protected] •ShinjiFujimoto,OsakaUniversity, [email protected] •SHANGChengjia,UniversityofScienceandTechnology Beijing,[email protected] •BongSunYoo,KIMS,[email protected] •WilliamTumas,NationalRenewableEnergyLaboratory, [email protected]
Advanced High-Temperature Structural Materials •JulieCairney,UniversityofSydney, [email protected] •HaruyukiInui,KyotoUniversity, [email protected] •ZHANGGuoqing,BeijingInstituteofAeronautical Materials,[email protected] •KyungTaePark,HanbatUniversity,[email protected] •EugeneOlevsky,SanDiegoStateUniversity, [email protected]
Advanced Steels and Processing •RianDippenaar,UniversityofWollongong, [email protected] •KaneakiTsuzaki,NationalInstituteofMaterialsScience, [email protected] •DONGHan,CentralIronandSteelResearchInstitute, [email protected] •SungJoonKim,POSTECH,[email protected] •KipFindley,ColoradoSchoolofMines, [email protected]
Light Metals and Alloys •Jian-FengNie,MonashUniversity, [email protected] •YoshihitoKawamura,KumamotoUniversity, [email protected] •ZHAOYongqing,NorthwestInstituteForNonferrous Metal Research, [email protected] •KwangSeonShin,SeoulNat.University, [email protected] •SuveenMathadhu,USArmyResearchOffice, [email protected]
Composites and Hybrid Materials •YuriEstrin,MonashUniversity,[email protected] •YutakaKagawa,UniversityofTokyo, [email protected] •ZHANGDi,ShanghaiJiaoTongUniversity, [email protected] •JaeChulLee,KoreaUniversity,[email protected] •NikhileshChawla,ArizonaStateUniversity, [email protected]
Biomaterials, Smart Materials, and Structures •AnitaHill,CSIRO,[email protected] •TakayukiNarushima,TohokuUniversity, [email protected] •JIANGChengbao,BeiHangUniversity, [email protected] •ByongTaekLee,SoonchunhyangUniversity, [email protected] •RogerNarayan,NorthCarolinaStateUniversity, [email protected]
Rare Earth, Electronic, and Magnetic Materials •MarkRidgway,AustralianNationalUniversity, [email protected] •KokiTakanashi,TohokuUniversity, [email protected] •LIWEI,CentralIronandSteelResearchInstitute, [email protected] •WooYoungLee,YonseiUniversity, [email protected] •SunghoJin,UniversityofCaliforniaSanDiego, [email protected]
Thin Films and Surface Engineering •MingxingZhang,UniversityofQueensland, [email protected] •TakashiGoto,TohokuUniversity,[email protected] •DONGChuang,DalianUniversityofTechnology, [email protected] •KyungHoShin,KIST,[email protected] •AmitMisra,LosAlamosNationalLaboratory, [email protected]
Pricm8 Symposia Organizers (cont.)
THE 8TH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING
Materials and Processes for Enhanced Performance •RobertO’Donnell,CSIRO,[email protected] •YoshimiWatanabe,NagoyaInstituteofTechnology, [email protected] •ZHANGJishan,UniversityofScienceandTechnology Beijing,[email protected] •YoungKookLee,YonseiUniversity,[email protected] •JieLiu,DukeUniversity,[email protected]
Solidification, Deformation and Related Processing •YinongLiu,UniversityofWesternAustralia, [email protected] •HiroyukiYasuda,OsakaUniversity, [email protected] •JIEWanq,NorthwesternPolytechnicalUniversity, [email protected] •Prof.HyongSeopKim,POSTECH, [email protected] •ZakFang,UniversityofUtah,[email protected]
Modeling and Simulation of Processes, Microstructures, and Behavior •GraemeMurch,UniversityofNewcastle, [email protected] •TetsuoMohri,HokkaidoUniversity, [email protected]
•LIDianzhong,InstituteofMetalResearchChinese Academy of Sciences, [email protected] •WonTaeKim,ChungjuUniversity,[email protected] •JoseACaro,LosAlamosNationalLaboratory, [email protected]
Bulk Metallic Glasses, Nanocrystalline Materials, and Ultrafine-Grain Materials •MichaelFerry,UniversityofNewSouthWales, [email protected] •NobuhiroTsuji,KyotoUniversity, [email protected] •ZHANGYue,UniversityofScienceandTechnology Beijing,[email protected] •EunSooPark,SeoulNat.University,[email protected] •YuntianZhu,NorthCarolinaStateUniversity, [email protected]
Advanced Materials Characterization and Evaluation •JinZou,UniversityofQueensland,[email protected] •ShoMatsumura,KyushuUniversity, syo＠nucl.kyushu-u.ac.jp •HANXiaodong,BeijingUniversityofTechnology, [email protected] •DongIlKwon,SeoulNat.University,[email protected] •AlexisLewis,NavalResearchLaboratory, [email protected]
Advanced Neutron and Synchrotron Studies of Materials •Klaus-DieterLiss,AustralianNationalNuclearResearch andDevelopmentOrganization,[email protected] •MasatoOhnuma,NationalInstituteofMaterialsScience, [email protected] •SHANGChengjia,UniversityofScienceandTechnology Beijing,[email protected] •BaekSeokSeong,KAERI,[email protected] •RozaliyaBarabash,OakRidgeNationalLaboratory, [email protected]
Abstract Submission
Deadline Extended: January 31, 2013
www.programmaster.org/PRICM8
www.tms.org/meetings/pricm8
