2
HYDRAULIC 4 TONS WINCH ON IVECO DAILY 4X4 objectives Design, manufacturing and installation of a complete winching solution at the front bumper (4 tons winch, fixing plate, hydraulic kit). This solution was developed to perfectly suit the vehicle and ensure performance and safety during operations. challenges Adapt the winch and the interface to the vehicle by the less possible intervention on it. For a French power supplier, STARTER engineers have developed and implemented recovery winch system on Iveco Daily AWD assistance vehicles. Background www.starterwinches.com Tél.: +33 (0)1 39 09 19 19 - Fax: +33 (0)1 39 09 27 57 - Email : [email protected]

For a French power supplier, STARTER engineers …...This interface became a standard fixing kit for IVECO Daily models. STARTER design office also developed the whole hydraulic kit:

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: For a French power supplier, STARTER engineers …...This interface became a standard fixing kit for IVECO Daily models. STARTER design office also developed the whole hydraulic kit:

HYDRAULIC 4 TONS WINCH ON IVECO DAILY 4X4

objectives

Design, manufacturing and installation of a complete winching solution at the front bumper (4 tons winch, fixing plate, hydraulic kit). This solution was developed to perfectly suit the vehicle and ensure performance and safety during operations.

challenges

Adapt the winch and the interface to the vehicle by the less possible intervention on it.

For a French power supplier, STARTER engineers have developed and implemented recovery winch system on Iveco Daily AWD assistance vehicles.Background

HYDRAULIC 4 TONS WINCH ON IVECO DAILY 4X4

www.starterwinches.com Tél.: +33 (0)1 39 09 19 19 - Fax: +33 (0)1 39 09 27 57 - Email : [email protected] GROUPE DLD - Parc d’Activités du Vert Galant - 5 avenue du Vert Galant 95310 Saint Ouen l’Aumône - FRANCE

Page 2: For a French power supplier, STARTER engineers …...This interface became a standard fixing kit for IVECO Daily models. STARTER design office also developed the whole hydraulic kit:

HYDRAULIC 4 TONS WINCH ON IVECO DAILY 4X4

bodyw

orks

HYDRAULIC 4 TONS WINCH ON IVECO DAILY 4X4

starter solution

Our engineers developed a fixing plate and integrated the winch on it. This interface became a standard fixing kit for IVECO Daily models. STARTER design office also developed the whole hydraulic kit: pump, hoses, tank, filters and electrical control from the cabin. The solution includes an independent hydraulic system (pumps, hoses, tanks, filters and electrical control) that perfectly fits the destination vehicle. The winch can be controlled from the outside of the vehicle by easy access lever, but also from the cabin by electric command system.

After design and computer simulation, dynamic load testing was performed on rigs and full-scale on the firts production in order to validate the strength of all mechanical components.

result

The vehicle is used on difficult access terrain for emergency interventions on power lines and other power supply fields.

TECHNICAL SPECIFICATIONS :Application : Self recovery.Pulling effort : 4 100 daN in first layer.Pressure : 180 bars.Flow : 47 l/min.Speed : 14.3 m/min first layer.Drum capacity : Wire-rope 40 m Ø 10 mm.

CSC0002A

Tél.: +33 (0)1 39 09 19 19 - Fax: +33 (0)1 39 09 27 57 - Email : [email protected] GROUPE DLD - Parc d’Activités du Vert Galant - 5 avenue du Vert Galant 95310 Saint Ouen l’Aumône - FRANCE