FOOD PACKAGING SEALING MACHINERY · Sealer is an efficient and easily transportable ‘plug and play’ film sealer. Ideal for profile sealing of variable sized food pots, including

FROM COUNTER TOP TO PRODUCTION MODELS

FOOD PACKAGING

SEALING MACHINERY

Disclaimer. The information contained in this catalogue is, to the best of our knowledge, accurate and reliable as of the date of publication. We do not, however, assume any liability whatsoever for the accuracy and completeness of the information. All images used are for illustrative purposes only and are subject to colour variation in certain instances. We reserve the right to modify specifications without prior consent where deemed necessary. E&OE.

All Colpac Limited original products displayed in this catalogue are protected by Intellectual Property Rights, including copyright and unregistered design rights and they may also be the subject of one or more registered designs or patents (or applications for such rights) where appropriate. All rights in the displayed products are reserved by Colpac Limited and no license is granted under those rights unless there is a written agreement to the contrary.

COUNTER TOP

ColSealTM Impulse Sealer 4

ColSealTM Sandwich Sealer 5

ColSealTM Auto Cup & Pot Sealer 6

CATERING & PRODUCTION ENTRY

ColSealTM SR230 Sealer 7

ColSealTM Maxi 8

PRODUCTION

ColSealTM PGINOX 10

- Pneumatic Bench Model Sealer

- Pneumatic Floor Standing Sealer

ColSealTM Savvie Sealer 12Semi-Automatic with optional compressor

ColSealTM SE1000 Conveyor 14Fully-Automatic Lidder & Sealer

PRODUCTION

ColSealTM Savvie Sealer (vacuum & gas) 12Semi-Automatic with optional compressor

ColMAPTM Slalom 7 20For vacuum, gas & M.A.P. products

QUICK GUIDEUse this guide to compare the specifications of our machinery. The range is categorised

into counter top, catering & production entry and production machinery making

it easier for you to find the perfect solution for your food

packaging needs.

Order code 08PGINLB 08PGFIPB (film roller)

08PGINLF 08PGFIPF (film roller)

08SAVGAS 08SE1000 08SAVGAS (vacuum & gas)

08COLSLA

Page No. 10 10 12 14 12 20

Machinery PGINOX Pneumatic Bench Model Sealer

PGINOX Pneumatic Floor Standing Sealer

Savvie Sealer SE1000 Sealer Savvie Sealer Slalom 7 Sealer

Type Sealing Sealing Sealing & M.A.P. Sealing Sealing & M.A.P. M.A.P.

Use Production Model Production Model Production Model Production Model Production Model Production Model

Production/Speed (units/h)

up to 500 up to 500 up to 500 up to 1200 up to 500 up to 1200

Sealing Area Capacity (mm)

320x420 (w) 320x420 (w) 260x400 (w) Made to order 260x400 (w) 380x265

Dimensions (mm) 600x600x450 600x600x1480 580x900x1325 2211x700x1119 580x900x1325 3800x1360x1400

Weight (kg) 27 80 175 150 175 700

PE

PP

BIO

PLA

Laminated

M.A.P.

Packaging C-vis® Trays, Heat-Seal, Film-Liddable and Laminated Packaging

C-vis® Trays, Heat-Seal, Film-Liddable and Laminated Packaging

C-vis® Trays, Heat-Seal, Film-Liddable, Laminated & M.A.P. Packaging

Heat-Seal and Laminated Packaging



Scan to watch Video

Order code 08KFC200 08COLSEA 08COLCUA 08COLCUB 08SR230 08MAXI 08MAXIFS (film roller)

Page No. 4 5 6 6 7 8

Machinery Impulse Sealer Sandwich Sealer Auto Cup & Pot Sealer 72-96mm

Auto Cup & Pot Sealer 97-120mm

SR230 Sealer Maxi Sealer

Type Sealing Sealing Sealing Sealing Sealing Sealing

Use Counter Top Counter Top Counter Top Counter Top Catering & Production Entry

Catering & Production Entry

Production/Speed (units/h)

Variable up to 300 up to 400 up to 400 up to 400 up to 400

Sealing Area Capacity (mm)

Up to 200 (w) 100x190 72-96 Ø 97-120 Ø 190x200x95 (h) 200x260

Dimensions (mm) 310x80x140 290x328x380 400x380x600 400x380x600 320x500x460 290x560x460

Weight (kg) 2 13 13 13 25 21

PE

PP

BIO

PLA

Laminated

M.A.P.

Packaging Clasp® and Sandwich bags

Heat-seal and Laminated Sandwich Packs

Hot Pots, Souper Cups, Multi-food Pots & PET/PP Cups

Hot Pots, Souper Cups, Multi-food Pots & PET/PP Cups

Hot Pots, Souper Cups, Multi-Food Pots, C-vis® Trays and Film-Liddable Packs

C-vis® Trays, Heat-Seal, Film-Liddable and Laminated Packaging

Scan to watch Video

Choosing the right packaging and sealing machinery may appear difficult but, as part of our service, we carry out machinery training in-house or at your or your customer’s site.We are committed to finding the right packaging solution for you and your customer, as the right machinery can help to increase productivity and efficiency on a production line as well as giving more flexibility.

Talk to our sales team about how we can help.CONTENTS

1

Tel: +44 (0)1525 712 261 • [email protected] • www.colpacpackaging.com

From small, semi-automated counter top machines for sandwich shops and delicatessens, to larger, fully automatic systems for higher volume manufacturers, heat-sealing machinery can dramatically improve output and production efficiency.

Capable of handling a wide variety of food packs, our sealing machinery is also integrated with the very latest technology to ensure we are meeting food service demands.

This includes Modified Atmosphere Packaging (M.A.P.) which can extend shelf-life and help meet food waste objectives.

As everything we create is managed under one roof, we have the ability to listen to individual requirements and engineer customised packaging and sealing machinery solutions, while offering full demonstration and testing facilities, technical support and customer service.

015 015

OUR CERTIFICATIONS+44 (0)1525 712 261

[email protected]

www.colpacpackaging.com

HOW TO CONTACT USDEDICATED IN-HOUSE CUSTOMER SUPPORT TEAM

ACCOUNT MANAGERS ALL AROUND THE UK / EUROPENETWORK OF AGENTS WORLDWIDE

The main office phone lines are open from Monday to Friday from 8am - 5pm.

Our office is closed during English public holidays.

To be the global leader in niche, added-value food packaging solutions, underpinned by our innovation, quality, responsiveness to customer needs and green credentials.

VISIONTo provide a comprehensive range of innovative food packaging solutions to customers around the world, working to exacting manufacturing standards in terms of quality, health and safety, hygiene, customer service and environment.

MISSION

Packaging available as FSC ® certified on request

32

OUR MULTILINGUAL

WEBSITE contains further information on all of our food packaging

solutions and sealing machinery

OVER

180 patents, trademarks

and registered designs

MANY OF OUR TEAM ARE MULTILINGUAL

offering expert advice on how packaging can be

adapted to meet the demands of individual overseas markets

Established 80 years ago, we design and manufacture creative, personalised food packaging products. Proud of our British heritage, we are based in Bedfordshire, a County in the East of England.

A private, independent company, operating from one, central manufacturing unit, we design, manufacture and sell a range of paperboard and combination packaging products, featuring strong green credentials, to food service operators and retailers globally.

4 5Tel: +44 (0)1525 712 261 • [email protected] • www.colpacpackaging.comFor more information about our full range of machinery, see page 1.

Manual lever operation

Raised rubber seal tool plate

The ColSealTM Sandwich Sealer is a stainless

steel hand operated sealing machine, designed

specifically for back of store, delicatessen

and cafe sandwich shops.

The ColSealTM Sandwich Sealer is built to seal

‘lid attached’ paperboard sandwich skillets,

in formed and erected packs.

With interchangeable tooling, the Sandwich Sealer can seal:

The ColSealTM Impulse Sealer is a manual,

hand operated clamp sealer suitable for our

Clasp® products and other bag and lay-flat

tube packaging. Ideal for baguettes, paninis,

sandwiches, pies, toasties and lots more.

It is quick and efficient to set up and use

in back of store, catering, and production

environments or for demonstration usage.

Adjustable seal time

Clamp seal operation

Integral sliding cutter blade built into the machine to allow seal or seal and cut

ColSealTM Impulse Sealer ColSealTM Sandwich Sealer

• Simple machine with easy clamp sealing operation

• Supplied with integral sliding cutter blade built into the machine to allow seal or seal and cut

• Specifically designed to seal and cut bags and lay-flat tubes

• Light weight, can be bench or work surface mounted near to a single phase domestic 240 volt socket

• Teflon covered hot wire impulse sealer

• PP and Poly 1mm wide seal

• Supplied with spare blade and sealing wire

• Easy to clean

Features and benefits

Order code 08KFC200

Production speed variable

Sealing area capacity Length up to 200mm in width, optional 300mm available

Dimensions 310 x 80 x 140mm

Weight 2kg

Power 240 volt x 1 phase x 50Hz

Air Supply no air needed

Technical data

Film to board packsBaguette bagsPE FilmPP Film

The Impulse Sealer can seal:

Laminatedsandwich packs

Heat-seal sandwich packs

BIO windowPE window

• Seals ‘lid attached’ paperboard sandwich packs

• Simple and efficient sealer that allows operators to be in production within a few minutes

• Light weight, can be bench or work surface mounted near to a single phase domestic 240 volt socket

• Simple to load and unload

• Suitable for other size sandwich packs

• Tool plate is easily removed for wash down and change over

• Interchangeable tooling


Order code 08COLSEA

Production speed variable, up to 300 units per hour, subject to load and reload

Sealing area capacity 100 x 190mm


Weight 13kg

Heat-seal plate Teflon coated, not interchangeable

Power 240 volt x 1phase x 13amp

Air Supply no air needed

Technical data

co

un

ter t

op

co

un

ter t

op

SCAN TO WATCH VIDEO SCAN TO

WATCH VIDEO


The ColSealTM Auto Cup & Pot Sealer is a stainless steel

semi-automatic cup and pot sealing machine system,

designed specifically for back of store, delicatessen

and cafe sandwich shops.

The ColSealTM Auto Cup and Pot Sealer is built to

‘film lid and seal’ onto paperboard cups and pots,

in two sizes 72-96mm or 97-120mm fixed diameter

profile film seal.

ColSealTM Auto Cup & Pot Sealer

Cup holding tool plate

470ml Multi- food pot

Souper Cups

Savori™ Hot Pots

Peelable film

With interchangeable tooling, the Auto Cup & Pot Sealer can seal:

PET/PP cups

• Seals ‘film lids’ onto paperboard cups and pots as well as plastic cups (PET/PP) for tamper proof seal

• Suitable for different size cups and pots (8/12/16/26 and 32 UK fl.oz)

• Simple to load and unload allows operators to be in production within a few minutes

• Light weight, can be work bench or counter top mounted

• Automatic film wind with adjustable feed

• Single cycle function and auto continuous cycle selection

• Simple base tool, easily removed for wash down and change over

• Interchangeable tool drawer collars

• Variable temperature control

• Continuous cycle count display (zeroed if needed)


Order codes 08COLCUA (Ø 72-96mm cup/pot diameter)08COLCUB (Ø 97-120mm cup/pot diameter)

Production speed variable and automatic cycle, up to 400 units per hour, subject to load and reload

Sealing capacity Top plate, fixed diameter 100mm or 120mm


Weight 25kg

Heat-seal top plate with circular cutting tool

Teflon coated, sizes Ø 72-96mm (08COLCUA) or Ø 97-120mm (08COLCUB)

Power 240 volt x 1phase x 50Hz x 13amp

Air supply no air needed

Technical data

Lightweight and flexible, the ColSealTM SR230

Sealer is an efficient and easily transportable

‘plug and play’ film sealer.

Ideal for profile sealing of variable sized food

pots, including soups and noodle dishes, meal

trays and portion meal with specific thumb

tabs for easy peel off lids. The ColSealTM SR230

Sealer is constructed from food grade S304

stainless steel and nylon for simple and easy

hygienic wipe down.

ColSealTM SR230

• Option: profiles tailor-made, seal and cut mechanism

• Easy to use machine with adjustable seal temperature

• Light weight, mobile, can fit on any work bench or counter top near to a single phase domestic 240 volt socket

• Operator can be in production in a few minutes

• Easy to clean food grade S304 stainless steel and nylon

• Each machine specified for individual requirements with a fixed film sealing head

• Simple change over of film, uses a magnetic clamp film pull through for each film cycle

• Optional film sealer with adjustable height and under tray support

• Can be used to seal plastic trays


Order code 08SR230


Sealing area capacity 190 x 200 x 95(h)mm (film width 200mm max.)


Weight 25kg


Power 240 volt x 1phase x 800W


Technical data

With interchangeable tooling, the SR230 Sealer can seal:

Multi-food pots

Souper CupsHot PotsPeelable film C-vis® Trays Film-liddable packs

co

un

ter t

op

ca

terin

g &

pro

du

ctio

n e

ntr

y

SCAN TO WATCH VIDEO

Ideal for sealing our Cups & Pots with a standard heat-seal film

SCAN TO WATCH VIDEO

Sugarcane Fibre Trays

Cups, Pots & Trays can be sealed with profile

thumb tabs for easy opening

7


Optional double sided tool allows for two different pack

sizes to be sealed.

Rotatable tool plate

Optional film roll holder

The ColSealTM Maxi is a hand operated

multi-functional sealer for heat-sealable

packaging such as sandwich, salad and

tortilla packs. This small and light weight

sealer offers versatility with two different

pack sizes within the same tooling drawer.

ColSealTM Maxi

The ColSealTM Maxi is all stainless steel and

ideal for use in coffee shops, retail outlets

and catering companies.

With interchangeable tooling, the Maxi Sealer can seal:

• Option: two different pack sizes within the same tooling drawer which is easily removed and rotated 180 degrees (see image)

• Easy to use machine with adjustable seal temperature

• Light weight, mobile, can fit on any work bench or counter top near to a single phase domestic 240 volt socket


• Easy to clean food grade S304 stainless steel

• Optional film sealing

• Seals our heat-seal range and PP trays



Order code 08MAXI 08MAXIFS (including film roll holder)


Sealing capacity 200 x 260mm


Weight 21kg


Power 240 volt x 1phase


Technical data

ca

terin

g &

pro

du

ctio

n e

ntr

y

ca

terin

g &

pro

du

ctio

n e

ntr

y

*dependent on pack type

SCAN TO WATCH VIDEO


SCAN TO WATCH VIDEO

Heat-seal packaging rangeC-vis® TraysPE window Laminatedsandwich packs

Film-liddable packs



Floor standing base frame

Cycle illumination light

ColSealTM PGINOX

The ColSealTM PGINOX is a pneumatically

operated sealer for paperboard and film sealing

onto paperboard and PP trays and packs. This

production model can either be bench mounted

or supplied with a floor standing base frame.

It is suitable for sealing multiple packs within the

tool plate.

Removable panel access to optional compressor

• Easy to use machine with adjustable temperature control

• Mobile option or compressor mounted inside base

• Easy to clean stainless steel S304 and removable side panel


• Base tooling drawer allows easy change over for other sizes

• Multi pocket base tool available (subject to product)

• Seals our paperboard heat-seal range and lidding film onto PP trays and open lid cartons

• Safety e-stop fitted

• Illuminated cycle sequence (indication light)



Order code 08PGINLF 08PGFIPF (including film roll holder)


Sealing area capacity 320 x 420mm wide


Weight 80kg

Heat-seal plate Teflon coated, flat plate, not interchangeable

Power 240 volt x 1ph

Air supply 6 bar clean dry air - compressor supplied separately or customer supply compressed air

Technical data

Order code 08PGINLB 08PGFIPB (including film roll holder)


Sealing area capacity 320 x 420mm wide


Weight 27kg

Heat-seal plate Teflon coated, flat plate, not interchangeable

Power 240 volt x 1ph

Air supply 6 bar clean dry air - compressor supplied separately or customer supply compressed air

Technical data

With interchangeable tooling, the PGINOX Sealer can seal:

Film sealing options

available for

3 C-vis®

3 Trays

pro

du

ctio

n

pro

du

ctio

n

Adjustable seal cycle time

SCAN TO WATCH VIDEO

SCAN TO WATCH VIDEO

SCAN TO WATCH VIDEO

Film-liddable packs

Heat-seal packaging rangeC-vis® TraysPE window Laminatedsandwich packs



The ColSealTM Savvie is available to seal

4 x packs per seal cycle.

This semi-automatic pneumatic operated sealing

machine is initiated by closing the tool plate drawer

containing our packs to initiate automatic seal

cycle by press button or auto start.

5 x programmable controls to adjust varied

heat-seal cycles.

We offer this machine for paperboard heat-seal

closure from sandwiches to trays and from

‘lid attached’ to film seal and from paper pulp

trays to pre-formed trays. This simple machine

is able to be in production in a few minutes.

Made from food grade S304 stainless steel,

it is mobile and fits into any production area

near to a 3 phase plug fitting.

Interchangeable tool plate

Sliding tool draw

Programmable control


ColSealTM Savvie

Also available with M.A.P. facility.

• Semi-automatic sealer with vacuum pump or compressor

• Seals up to 4 packs per seal cycle. Optional extra tool sets available

• Suitable for heat-seal closure from sandwiches to trays and from ‘lid attached’ to film seal onto pulp trays or pre-formed PP/PET trays

• Operates by closing the tool plate drawer containing the packs to initiate automatic seal cycle / manual cycle

• Operation control adjustable from the panel for varied heat and seal cycles (5x programme to select)

• Easy to use machine which can be in production within minutes

• Easy to clean food grade S304 stainless steel

• Base tool drawer allows easy change over for other sized packs

• Multi pocket base tool available

• Seals packs with PE and PLA (bio) windows as well as film-lidding trays

• Integral vacuum pump for M.A.P.

• Optional silent running compressor at extra cost available for ambient



Order code 08SAVGAS


Sealing capacity 260 x 400mm wide


Weight 175kg

Heat-seal plate Teflon coated

Power 380/415 volt x 3 phase

Air Supply Vacuum pump or integral compressor included; subject to customer confirmation

Technical data

With interchangeable tooling, the Savvie Sealer can seal:

Heat-seal packaging rangePLA windowPE window M.A.P. Trays C-vis® M.A.P. Trays

M.A.P. PacksFilm-liddable packs

Film sealing options

available for

3 C-vis®

3 Trays

pro

du

ctio

n

pro

du

ctio

n

SCAN TO WATCH VIDEO



The ColSealTM SE1000 sealing machine system

is designed specifically for larger producers of

paperboard heat-sealable food-to-go products.

This automatic linear conveyor enables

operators to quickly produce higher volumes.

It can be permanently placed or easily wheeled

near to a single phase domestic 240 volt socket

and clean air supply, up to 9 CFM. The SE1000 is

simple to load and unload so operators can be in

production within a few minutes. Optional change

over to other size products. Sealing tool plates are

adjustable for sandwich packs in ST23 or ST24 sizes.

The ColSealTM SE1000 sealing tool plates are easily

removed for wash down and change over for other

sized products.

Extra safety stop

Eject ski rails

Jacking feet

Safety infeed flap

Inboard panel

ColSealTM SE1000

With interchangeable tooling, the SE1000 Sealer can seal:

Heat-seal packaging rangePLA windowPE window

• Automatic conveyor lidder and sealer for high volume manufacturers

• Automatic sealing operation for ‘lid attached’ paperboard sandwich, wrap, tortilla, salad and baguette heat-sealed packaging

• Can be permanently placed or easily wheeled near a single phase domestic socket and needs clean air supply, at 6 bar pressure and 9CFM

• Efficient machine, simple to load and unload enabling operators to be in production within a few minutes

• Easy change over to other sized products with adjustable tooling

• Simple efficient base tools that can be easily removed and cleaned

• Manual loading of sandwich packs into tooling pockets

• Discharge exit of sealed packs onto conveyor or turntable (customer supply)

• Longer length conveyor options available

• Left to right operation (alternative also available)

• Seals Colpac ST23 and ST24 sandwich packs, SP1, ST61, TS5, BG1

• Seals PE windows or optional PLA (bio) windows with special recessed seal plate


Order code 08SE1000

Production speed up to 1200 units per hour, subject to load and reload

Sealing capacity Made to order (per product)



Weight 150kg

Heat-seal plate Teflon coated

Power 240 volt x 1 phase x 50/60Hz x 16amp industrial plug

Air Supply Compressor supplied separately or customer supply compressed air

Technical data

pro

du

ctio

n

pro

du

ctio

n

SCAN TO WATCH VIDEO

1716Tel: +44 (0)1525 712 261 • [email protected] • www.colpacpackaging.com

HEAT-SEAL MICROWAVEABLE & OVENABLE

HEAT-SEAL Cookpac® is a new and smart packaging solution for chilled and frozen ready made meals, ideal for niche and quality retail markets, the catering industry, canteens in schools, colleges and hospitals, as well as for home delivery.

Material Ovenable board + PET

Coating Heat-resistant, matt

Colours Ovenable ink up to 6 colour print

Heating Options Ovenable up to 210 0C, microwaveable

Food Certifications EN71, (EC) N. 1935/2004, (EU) N. 10/2011, 2007/19 EC, (EC) N. 2023/2006

Specification

Cookpac® Plastic tray

Oven/Microwave ü üRecyclability ««««« ««

Environmentally Friendly

««««« ««

Transit Test ««««« ««

Taste/Aspect ««««« «««««

Branding ««««« ««« (need sleeves)

Shelf-Life ««««« «««

This all-in-one pack offers extensive branding solutions and uses up to 80% less plastic than traditional plastic trays for improved sustainability and environmental impact.

Comparison

Lid sealing machinery is required for Heat-sealable Cookpac.

COOKPAC® HEAT-SEAL PACKS ARE MADE TO ORDER.

(subject to minimum order quantities)

• Unique, recyclable one-piece pack – tray, lid and sleeve all-in-one

• Single stock keeping unit (SKU), one product code

• Rigid, non-stick board – strong construction design

• Individual printing opportunities

• Custom made pack sizes and window apertures available meeting your special requirements

Straight from fridge or freezer to microwave or conventional ovens

MICROWAVEABLE AND OVENABLE ONE-PIECE PAPERBOARD PACK

This premium pack is an environmentally friendly solution for chilled and frozen prepared meals, ideal for the catering and foodservice industry, the niche retail markets as well as for home delivery.

OVENABLE (UP TO 210°C/410°F – 40 MINS)

Cookpac® Heat-seal can be sealed with the following machines:

Colseal™ Maxi Colseal™ PGINOX Colseal™ SE1000 ColMAP™ Slalom 7

Modified Atmosphere Packaging (M.A.P.) technology extends the shelf-life of food products, maintaining their fresh look and taste.

M.A.P. has long been associated with plastic packaging. However, after years of research

and development, we have harnessed the technology to enable the production of recyclable

paperboard based hermetically sealable packs, suitable for vacuum and gas flushing

on our exclusive range of M.A.P. machinery (ColMAP™).

Important:We recommend that our customers carry out tests using our machinery and packaging, with their own specific food ingredients, to ascertain optimum shelf-life.

Also available with M.A.P. facility.See page 12.

ColMAPTM packaging features:

• Recyclable, laminated paperboard

• Multi-layered Folding Box Board (FBB)

• High barrier multi-layer film

• Suitable for food grade gases e.g. Carbon dioxide (CO2) and Nitrogen (N2)

• Extended shelf-life with no gas also achievable

• Strong branding options

ColMAPTM packaging benefits:

• Reduction in packaging and food waste

• Reduced transport costs (less frequent deliveries)

• Improved production efficiency

• Extended freshness of the product (depending on food products and influence of environment)

• Increased consistency (colour, freshness, taste…)

• Reduction, if not elimination, of chemical preservatives

• Possibility of creating new products and dishes

SEALERS FOR VACUUM& GAS M.A.P PRODUCTS

18 19


ColMAPTM SLALOM 7

The ColMAPTM Slalom 7 is a linear automatic

sealing machine working with a tool plate index

system. It is manufactured and designed to

accommodate a range of paperboard Modified

Atmosphere Packaging (M.A.P.) products, including

sandwich and salad packs and meal trays.

Packs are placed by hand into tooling pocket plates.

The machine then indexes through vacuum and gas

chamber at the desired M.A.P. programme.

The bodywork of the machine is extruded anodized

aluminium and it is assembled on 6 x adjustable

levelling feet and 6 x castors for mobility.

Interlock safety panels, covers and control boxes

are in stainless steel S304. All panels are easily

removed for maintenance or clean down of machine.


• Tooling plates index pneumatically within poly guides

• Index and tool plates are centralised before seal closure, this system optimises reliability

• Vacuum and gas and seal cycle commences with safety control

• Index through into the seal head area is under a roller to assist in the fold and crease of the flange edges before sealing

• No need for tools to extract tool plates as these drop into position onto sealing guides which control position and indexing

• Teflon coated heated seal plate

• Removal and complete change over of tool sets is approximately 15 minutes

• Touch screen and push button controls, from a control panel surface mounted at infeed

• Selection of up to 10 programmes are available to vary amounts of vacuum and gas fill to achieve desired lowest residual oxygen content

• Electronic systems are positioned in stainless steel panel for easy inspection and maintenance

• External 106 m3 vacuum pump

• Vacuum can be controlled by time or by sensor

• Gas inlet for premixed gas (customer supply)

• Regulator of pressure and sensor of gas supply is fitted and an audible alarm for lack of gas or low gas sounds

• Ejection / exit at 900 to infeed and gravity drop onto customers accumulation table or conveyor

• Optional extras: coders, load stations, interlocks and right and left hand exit


Order code 08COLSLA

Production speed variable, up to 1200 units per hour, subject to load/reload and pack type

Sealing capacity up to 10 cycles per minute


Dimensions 3800 x 1360 x 1400mm (machine footprint)

Weight 700kg approx.

Power 32 Amp x 3 phase x 50/60Hz + N + E (5 pin 16 Amp industrial)

Air supply Customer supply compressed air vacuum pump included (outside of machine)

Technical data

With interchangeable tooling, the Slalom 7 can seal:

M.A.P. laminated film

pro

du

ctio

n

pro

du

ctio

n

Control panel

External Vacuum Pump with independent power supply

3800

1170

1340

Side view

3800

1170

1340

Top view

SCAN TO WATCH VIDEO

M.A.P. Trays C-vis® M.A.P. Trays

M.A.P. PacksFilm-liddable packs


Pack exit

Direction of pack sealing

Colpac Ltd.Enterprise Way, Maulden Road, Flitwick, Bedfordshire, MK45 5BW, England, UK.

Tel: +44 (0) 1525 712 261Fax: +44 (0) 1525 718 205Email: [email protected]

www.colpacpackaging.com

Registered in England 00326182

Registered office address as above.

BRITISHDESIGNER &MANUFACTURERDELIVERING INNOVATIVEFOODPACKAGING

SOLUTIONSWORLDWIDE

Documents

FOOD PACKAGING SEALING MACHINERY · Sealer is an efficient and easily transportable ‘plug and play’ film sealer. Ideal for profile sealing of variable sized food pots, including