7/30/2019 Folleto Comercial Epobar
2/3
5C9C
10C 19C
20C 29C
30C 39C
40C
22 min.
11 min.
6 min.
3 min.
3 min.
250 min.
190 min.
110 min.
65 min.
50 min.
2x
4
6
2
1
5
2x
2x
3
Operating instructions
Working & curing times
Perormances*
Environment
Eco designs are central to SPITS
design for innovation
Compared to mechanical anchors, chemical anchors are suitable
for use in all materials (hollow material,
concrete, stone). Chemical anchors are strong, durable,
waterproof, and resistant to vibrations.They are ideal for any
construction site situation with variable diameters and
embedments.
Chemical anchors benefts
Resin especiallydeveloped for
construction jobsitesThe only producton the market dedicated
to concrete reinforcementIdeal injection and rebar setting times
up to -5C.
Optimized performance for concrete in dryand humid
conditions.
Maximum bonding strength, even with diamonddrilled holes.
High output anchorA complete range offeringfor all your
construction
jobsite needs
A wide range of resintube sizes suitable for even
the largest of jobsites.
A high flow mixer for deep anchoragesand time saving.
A Professional offer for manual, electricalan pneumatic
injection tools.
Performanceswith CE approvalsApprovals recognised throughout
Europe
European Technical Agreement (CSTB)
Fire rated (up to 4 hours) (CSTB)
German approval (DIBT)
"SPIT EXPERT" Calculationand Design software
Manuacturing
Product
Research
Our patented resins are
designed and manufacturedin our factories located in
France.
They follow ISO 9001 Quality
standards and ISO 14001
Environmental standards.
Thanks to its rigid black
cartridge, SPIT EPOBARis shock resistant and
protected against climate
issues (UV, humidity).
The cartridge design has
a special plunger which
reduces resin waste and
limits the quantity of dangerous
waste. This is not the case
for the supple pouch
system*
Our development focus is
on designing products thatuse raw materials which
have less impact on the
environment, reduce waste
and ensure all our cartridges
can be recycled.
*independent laboratory report
0679-CPD-355
ETA 08/0201ETAG 001-5 TR023
FIRETEST
SPIT
Z- 21.8-1885
2100 3400 4900 6600 8700 13600 21100 34900
8 10 12 14 16 20 25 32
Ultimate limit loads (Fe E500)
(concrete reinforcement applications)
* Indicative loads only. Perormances must be checkedand approved
according to jobsite conditions.
Load(
kg)
7/30/2019 Folleto Comercial Epobar
3/3
Applications
Distributor
www.spit.comSPIT products are specifically designed for trained
professional end users.
Operation and safety instructions within the user manuals must
be adhered to at all times. Anchors must be selected according
to the nature of base materials, the load to be supported and
exterior conditions. The selected product has to be checked and
approved according to technical data, precise calculations and
on-site tests if required, particularly in cases where there is
undefined base materials or products without technical
agreements. Please feel free to contact us for advice:
www.spit.com.
Range and accessories
Calculation andDesign sotware
EPOMAX
Fast curing resinspecifcally designedfor threaded studs and
rebars applications
EPOBAR
Resin specifcallydesigned or rebarsapplications
C-MIXPlus
Fast curingmulti-applicationresin
EPCON C8
Resin or extremerebars and studsapplications
