Embed Size (px)
DESCRIPTION
Â
Citation preview
HARRISON & CLOUGH LTD
Ref: 00314
FOCUS ONPr o d u c t d e v e l o p m e n t f r o m t h e e x p e r t s
BRAND NEW AND ONLY AVAILABLE FROM H&C
®
Also featuring Rivets, Cup Sq Hex, Deck-Tite®, Screw-Tite®, Timber-Tite® and Allthread
THE NEW NAME FOR SCREWBOLTS
THE NEW NAME FOR SCREWBOLTS
Harrison & Clough The Experts In Fasteners
Contact your account manager today for more information or visit www.harclo.com
HARRISON & CLOUGH LTD
The experts in fasteners
- SERBO can be used in concrete, blocks, brick and stone.- SERBO is well suited for 'close to edge' fixing.- SERBO has superb insertion speed into pre-drilled holes.- SERBO serrated thread prevents swarf build up in the hole.- SERBO requires less torque to drive, saving time and battery life.- SERBO is an ideal fixing for permanent or temporary anchoring.- SERBO is easily removed and can be re-used in the same hole.
Why choose SERBO?
For more information go to www.harclo.com or email [email protected] ®
BRAND NEW AND ONLY AVAILABLE FROM H&C
This unique serrated thread prevents debris build up in the hole allowing for a quicker insertion time.
SERBO serrated thread - a revolutionary thread design enabling speed and ease of insertion into all types of material with excellent pull out resistance.
THE NEW NAME FOR SCREWBOLTS
~ Revolutionary serrated thread~ Innovative design~ Money saving~ Time saving~ Re-usable
HARRISON & CLOUGH LTD
The experts in fasteners
BULK RivetsIf you have the enquiry we have the volume!
Alternatively, for more information email [email protected]
Our cup square hex bolts are procured from trusted manufacturers and are all CE approved. Also known as carriage or coach bolts, these fully threaded cup square hex bolts conform to DIN603 standards and come complete with nuts.Fully threaded to 150mm; longer bolts part threaded with 150mm.
Cup Sq Hex Bolts
Larger sizes now available
®
Cup square hex boltsZinc
Sizes available from:M8 x 60 to M20 x 220
Standard: EN 14592:2008
We are pleased to offer our customers the option of buying in bulk across a core range and size of MetalMate rivets. H&C’s MetalMate brand has always offered the highest quality of product at the most competitive prices. Our bulk rivet range is no exception.
®
For more information email [email protected]
M16 & M20 Lines Now
Added
Aluminium 16mm lge flange rivetMS mandrel
Sizes available from:4.8 x 12 to 4.8 x 24
Aluminium dome head rivetMS mandrel
Sizes available from:3.2 x 6 to 4.8 x 20
H&C's Boxed Rivet Range...In partnership with Sariv
Sealed typeDome headCountersunk Flange
Multi gripPeel type Rivet nut
Plain or Knurled Body
AluminiumZinc plated steel
Stainless steelCopper
Finishes available in:
For more information, download our product guide at www.harclo.com or email [email protected]
Sizes available from:3.0 x 6 to 6.4 x 22
With the success of our small boxed rivet range in partnership with Sariv, we wanted to ensure a solid offering to our customers across volume driven enquiries. Our MetalMate bulk range covers the core aluminum dome head and the aluminum 16mm large head rivets.Please contact your account manager today for a quotation!
MetalMate®
[email protected] 571 22 330844 571 22 22 www.harclo.com
HARRISON & CLOUGH LTD
The experts in fasteners
®
H&C's extended allthread range now offers a larger selection of sizes across three finishes.
THE JOB • THE SCREWDeck-Tite®• Ideal for all pressure treated timber - decking/fencing/sheds• Net-coat treated for high corrosion protection• Clamps the boards fast and will not unscrew over timeScrew-Tite®• Ideal for all timbers and boards• Powered by prizewinning Tri-Lock shank• Causes less timber damage on insertionTimber-Tite®• Heavy duty screw ideal for landscaping and decking• Countersunk head allows facia board fixing and minimal timber damage• No pilot hole needed in most applicationsFor more information email [email protected]
1
23
Deck-Tite® and Timber-Tite® have both been awarded the TDA's
DeckMark® accreditation
We've extended our allthread offering
We offer a range of sizes from M6 x 1m through to M30 x 3m.Finishes are available in self-colour, zinc-plated and now galvanised. These finishes are available on both the mild steel and high tensile allthreads.All our threaded bars are procured by trusted manufacturers, and have been extensively tested for quality and strength.For more information email [email protected]
High tensile allthreadGr8.8 / self-colourSizes available from:
M6 x 1m to M30 x 1m
Mild steel and high tensile allthreadGr8.8 / galvanisedSizes available from:
M8 x 1m to M30 x 3m
High tensile allthreadGr8.8 / zinc platedSizes available from:
M6 x 1m to M30 x 3m
0844 571 22 22 0844 571 22 33 [email protected] www.harclo.com Read previous editions online
Monday - Friday8.15am to 5.15pm
Trade Fast24/7
Trade Fast24/7Save time, save money,
trade the 'TradeFast' way!While our customer sales centre continues to be a hive of activity, we recognise the potential cost benefits and convenience that online trading brings to our customers. We have invested in the infrastructure to provide you with a practical and easy to use website that is extremely efficient for all.Try for yourself at www.harclo.com
