Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
INNOVATIONWinter 2018
we want to hear from you
The new Hilti TE 30 and TE 30-C-AVR SDS+ rotary hammers deliver impressive drilling performance without a lot of weight. At just 9 lbs, the TE 30 and TE 30-C-AVR SDS+ keeps you drilling non-stop at various drilling orientations with minimal effort overhead or at shoulder level. Add to that, remarkable vibration control and a chiseling function the TE 30-C-AVR SDS+ makes the ultimate general purpose, get-it-done tool.With impressive power-to-weight ratios and the lowest vibration in its class for the TE 30-C-AVR SDS+, it is easy to see why the TE 30 and TE 30-C-AVR SDS+ rotary hammers are quickly becoming the professionals’ tools of choice.
TOUGH ON CONCRETE. EASY ON YOU.
Rotary hammers TE 30 and TE 30-C-AVR SDS+
APPLICATIONS AND ADVANTAGES
Applications• Drilling anchor, rebar, and through
holes in concrete and masonry up to 1”• Chiseling in brick and block, corrective
chiseling and surface finishing on concrete (TE 30-C-AVR SDS+ only)
• Driving concrete screw anchors
Advantages• Maximum versatility: suitable for drilling
and chiseling (TE 30-C-AVR SDS+ only) in a variety of base materials
• Exceptionally high power-to-weight ratio
• Active Vibration Reduction (AVR) makes working with the tool less tiring and increases productivity (TE 30-C-AVR SDS+ only)
Tool warranty. Some limitations apply. Contact Hilti for details.
Technical data
Impact energy 2.7 ft-lbs
Impact frequency 4,500 impacts per minute
Weight 9 lbs (TE 30); 9.3 lbs (TE 30-C-AVR)
Amperage 8.6 A
Accessories
Description Item number
DRS-S dust collection system 340602Replacement SDS+ chuck 2052753
Description Item number
TE 30 with 1x TE-CX 5/8" x 6" bit and 1x TE-CX 1/2" x 12" bit 3578571TE 30-C-AVR with 1x TE-CX 5/8" x 6" bit and 1x TE-CP FM 18 chisel 3578572
Cordless rotary hammer TE 6-A22
The new Hilti TE 6-A22 cordless rotary hammer drill provides speed unmatched from any corded or cordless rotary hammer drill in its class. The TE 6-A22 has two battery options, offered with the B22/5.2 CPC Li-Ion industrial class batteries for the most performance and work-per-charge and the B22/3.0 CPC Li-Ion Advanced compact class batteries for customers who need the weight savings, especially when working overhead. The TE 6-A22 includes a chiseling feature for light duty/corrective chipping.
TE DRS 6-A T1 Dust Removal System (DRS) can be added to the tool to provide an OSHA 1926.1153 Table 1 compliant solution for dust control when drilling into concrete. The Hilti TE 6-A22 cordless rotary hammer drill provides versatility for best in class performance, safety, and productivity.
THE WORLD’S FASTEST ROTARY HAMMER IS NOW AVAILABLE ON THE HILTI 22V PLATFORM
APPLICATIONS AND ADVANTAGES
• Unmatched drilling speed from any corded or cordless rotary hammer drill in its class
• Chiseling for finish and clean up work• Tool is equipped with Active Vibration
Reduction to give the user the ultimate in productivity
• Two battery options — advanced compact batteries for reduced weight, and industrial class for more work per charge
• Industry-leading warranty with up to 2 years of wear and tear coverage including free battery and charger replacement
Tool warranty. Some limitations apply. Contact Hilti for details.
Technical data
Battery type B22/5.2 CPC Li-Ion B22/3.0 Advanced Compact CPC Li-ion
No load speed 1050 rpm
Hammering frequency 5,100 bpm
Dimensions (LxWxH) 14.4 x 3.6 x 7.9 in
Weight 8.2 lb
Description Item number
TE 6-A22 Industrial — Case 3577891TE 6-A22 Advanced Compact — Case 3577980TE 6-A22 Industrial — TE DRS 6-A T1 — Case 3577985TE 6-A22 Advanced Compact — TE DRS 6-A T1 — Case 3577994
we want to hear from you
POWER AND PERFORMANCE WITHOUT THE WEIGHT
Demolition hammer TE 2000-AVR
The TE 2000-AVR is the perfect blend of power, ergonomics, and weight. Weighing in at 33 lbs., it is easy to maneuver and transport throughout the jobsite, and is ready for use in minutes thanks to the detachable cord and quick TE S-connection. With a t-handle design and exceptionally low vibration from Hilti’s innovative sub-chassis AVR (Active Vibration Reduction) system, the TE 2000-AVR allows for efficient performance and maximum working comfort.
The TE 2000-AVR utilizes a brushless SR motor which eliminates the need for regular replacement of carbon brushes and the detachable power cord allows for quick replacement of broken or damaged cords right on the jobsite. Whether you are running the tool from a wall outlet or a 100-ft., 12-gauge extension cord, the tool electronics help ensure the performance will remain consistent.
Add the TE 2000-AVR to your tool arsenal today to handle a variety of demolition and breaking applications and you’ll notice improved productivity while decreasing repair frequency.
Tool warranty. Some limitations apply. Contact Hilti for details.
APPLICATIONS AND ADVANTAGES
Applications• Medium-duty demolition of concrete slabs and foundations
(up to 8” thickness)• Breaking work on concrete or other materials in basements
and on patios in residential applications• Breaking out channels for laying pipe in plumbing applications• Breaking in tight areas
Advantages• Low weight makes the tool easy to handle and maneuver• Longer service intervals and long life thanks to the brushless,
maintenance-free SR motor• Detachable supply cord for quick and easy replacement of
damaged supply cords• OSHA 1926.1153 T1 compliant when used with TE DRS-B and
a Hilti vacuum cleaner
Technical data
Weight 33 lbs
Impact energy 26 foot-lbs
Impact frequency 1,800 impacts per minute
Amperage 15A
Connection end TE-S
Vibration 4.8 m/s2
Accessories
Description Item number
TE DRS-B dust collection system 365944Chisel bag 2170568Pointed chisel 17” long 2168871Narrow-flat chisel 17” long 2168875
Description Item number
TE 2000-AVR with 2 cords, trolley, and 4 chisels (2 point, 2 narrow-flat) 3578530TE 2000-AVR with 2 cords, and 4 chisels (2 point, 2 narrow-flat) 3578531 TE 2000-AVR with 2 cords and 2 clay spade chisels 3578532TE 2000-AVR with 2 cords, trolley, 4 chisels (2 point, 2 narrow-flat), DRS-B, and VC 150-10X 3578563
Spare detachable cord. Works with TE 50-AVR, TE 60-AVR, TE 60-ATC/AVR, and TE 2000-AVR 2127087
Detachable supply cord
we want to hear from you
With the DD-WMS 100 you can spend less time managing water supply, slurry and dust removal saving you hours of unproductive time. Water is recycled up to 7 times providing water autonomy (30 gallons) for up to an entire day. During coring, slurry is captured in the filter bag making slurry disposal very easy. The WMS 100 sets the new standard in diamond coring. You no longer have to worry about slurry today or silica dust tomorrow when using the WMS 100.
MAKE CORING EASY
Water management system DD-WMS 100
APPLICATIONS AND ADVANTAGES
• Suitable for all wet diamond coring applications
• Works with all Hilti or competitor wet coring tools
• Operates in 3 modes — recycling, cleaning and water supply
Technical data
Dimensions (LxWxH) 20.5 x 15 x 25.6 in
A-weighted emission sound pressure level 76 db (A)
Hose length 16.5’
Rated voltage 120 V
Suction capacity 74 L/s
Supply cord length 15.7’
Weight 49.6 lb
Description Item number
WMS 100 starter kit (includes WMS, 6 filter bags, 5” WCS ring, push bar, hoses, connections) 3575546
Accessories
Description Item number
Filtration bag WMS 100 (5 pack) 2145833
Water collector system ring up to 2 1/2” bit 2159810
Water collector system ring up to 5” bit 2159811
Water collector system ring up to 5-1/2” bit 2159812
Fixed water collector up to 6-1/4” for DD 150 & DD 160 3578789
Water collector system ring up to 7” bit 2159813
Water collector system ring up to 10” bit 2159814
Hilti has innovated the pointed chisels again making the new TE SPX pointed chisels your best partner for breaking concrete daily. More breaking power, higher bending strength, and better dust control. The TE SPX pointed self-sharpening polygon chisel provides the highest reliability and a longer lifetime.
The innovative X-polygon wave design and tube effect maximizes your Hilti demolition hammer performance, reduces your downtime due to sticking or jammed chisels and provides optimized dust removal. With the TE SPX pointed chisels there is no more re-sharpening, jamming or sticking like conventional chisels.
INNOVATED AGAIN.MAXIMIZE PERFORMANCE.REDUCE DOWNTIME.
Pointed chisels TE SPX SM
APPLICATIONS AND ADVANTAGES
• Constant high performance over the entire life of the self-sharpening polygon chisel — no resharpening, reforging or rehardening necessary
• Reduced sticking thanks to the unique wave design and new X-polygon tube effect for optimized dust removal — less downtime due to stuck chisels
• New X-polygon cross section for maximized strength and rigidity as well as maximum productivity and reduced risk of chisel breakage
• Extra-high breaking performance with wider crack formation thanks to wider X-polygon flanks for more efficient breaking
• High-alloy steel and unique induction hardening for highest reliability
• The dust cap helps keep dust out of the chuck for reduced wear and longer system lifetime
Technical data
Connection end TE-S
Type Pointed
Description Item number
TE-SPX SM 36 Pointed chisel 2168870TE-SPX SM 43 Pointed chisel 2168871TE-SPX SM 50 Pointed chisel 2168872TE-SPX SM 70 Pointed chisel 2168873
Use with TE 1000 & TE 2000
we want to hear from you
When we created the Hilti family of diamond core bits, we set out to make a product line robust and flexible enough to meet your jobsite and value expectations. It starts with the budget-friendly P line, a good diamond core bit for wet coring with virtually all tools in reinforced concrete.
When the job’s a little more demanding, demand our SP bits, offering better performance in the most challenging conditions, delivered by a premium diamond core bit and Hilti’s unique Equidist segment technology.
For the best in performance, productivity, and convenience look no further than our SPX models, which combine the performance of our SP bits with our unique “X-Change” module system to facilitate quick onsite retipping and easy stuck core removal.
OUTSTANDING PERFORMANCE AND VERSATILITY IN ALL CORING APPLICATIONS
Diamond core bits P, SP, SPX
Technical data
Core bit P SP-L SP-H SPX-L SPX-HFor use with Hilti DD 150
or larger Hilti core rigs or competitive core rigs
Hilti DD 150, Hilti DD 160 or competitive low hp diamond drilling tools (below 2.5 kW)
Hilti DD 200, Hilti DD 250, Hilti DD 350, Hilti DD 500 and competitive high hp diamond drilling tools (2.5 kW and above)
Hilti DD 110, Hilti DD 120, Hilti DD 150, Hilti DD 160 or competitive low hp diamond drilling tools (below 2.5 kW)
Hilti DD 200, Hilti DD 250, Hilti DD 350, Hilti DD 500 and competitive high hp diamond drilling tools (2.5 kW and above) )
Base material Concrete (all types)
Concrete (all types)
Concrete (all types)
Concrete (all types)
Concrete (all types)
Drilling mode Rig-mounted Rig-mounted Rig-mounted Rig-mounted or Hand Held
Rig-mounted
Wet or Dry drilling
Wet Wet Wet Wet or Dry Wet
X-change module
- - - Yes (2” to 8”)
Yes (2” to 8”)
P (for all hp tools)A good core bit made with Hilti quality which can be used with all Hilti rigs from DD 150 and larger or competitive rigs.
Advantages • Long life in normal reinforced
concrete applications
Applications• Rig-based wet coring in all types of
concrete
SP-L (for low hp tools) A better core bit which has been optimized for low hp core rigs, DD 160 and smaller or competitive rigs.
SP-H (for high hp tools) A better core bit which has been optimized for high hp core rigs, DD 200 and larger or competitive rigs.
Advantages • Hilti Equidist segment technology (1-3/8” diameter
and above), featuring precisely positioned diamonds for unmatched drilling performance
• Constant high drilling speed over the entire life of the core bit
• Designed for the most challenging conditions, this core bit excels in concrete with a high rebar content
Applications• Rig-based wet coring in all types of concrete
SPX-L (for low hp tools) Our best core bit with the extra benefits of the Hilti unique X-Change module. Optimized for low hp core rigs, DD 160 and smaller or competitive rigs.
SPX-H (for high hp tools) Our best core bit with the extra benefits of the Hilti unique X-Change module. Optimized for high hp core rigs, DD 200 and larger or competitive rigs.
Advantages • Same advantages as SP but with unique Hilti X-Change module system (2” to 8”)
which enables fast and easy onsite retipping with a flat-head screwdriver• The X-Change module allows you to free a stuck core bit from the base material
in less time and with less damage than when removing conventional core bits from stuck situations
• The X-Change module allows you to easily slide a stuck core out of the barrel by detaching the module from the barrel, freeing the stuck core
• The X-Change module system saves significant space and weight by replacing conventional core bits with a single barrel and multiple modules (X-Change module)
• X-Change barrel can be used for the life of three modules
Applications• SPX-L and SPX-H: Rig-based wet coring in all types of concrete• SPX-L: Hand held dry applications with SPX-Masonry X-Change modules• SPX-L: Hand held wet applications with SPX-Hand Held bits
P
SP-L
SPX-L
SP-H
SPX-H
P SP SPX
we want to hear from you
The Hilti NPU 100-A22 cordless knockout punch provides users with a highly productive solution for making precise holes in a variety of electrical enclosures. This tool allows for extreme maneuverability to reach into difficult applications where other tools struggle to reach. The Hilti NPU 100-A22 cordless knockout is a safer option over manually actuated hydraulic knockout tools and provides faster application performance over manual tools as well. This tool is backed by the industry leading Hilti 20-2-1 warranty.
KNOCKOUT YOUR METAL PUNCHING JOBS
Knockout punch NPU 100-A22
APPLICATIONS AND ADVANTAGES
• Punches up to 4” holes in a variety of base materials
Tool warranty. Some limitations apply. Contact Hilti for details.
Technical data
Punching capacity mild and stainless steel 4" in conduit up to 10 gauge enclosures
Punching capacity mild steel 6" in conduit up to 10 gauge enclosures
Punching force 100 kN
Rated voltage 21.6V
Weight according EPTA Prodecure 01/2003 6.7 lb
Description Item number
NPU 100-A22 Adv 3581776NPU 100-A22 3581777
The new Hilti fixed jaw ACSR cutting tool, NCT 25-A22, is designed to help power and utility contractors cut aluminum conductor with steel re-enforcement safer than manual cutters with increased productivity. This lightweight ergonomically designed tool allows for increased productivity due to the automatic jaw retraction feature and the trigger design that allows for safe operation when wearing Class 2 or 4 protective gloves.
The NCT 25-A22 is the only cutting tool on the market that offers the Hilti 20-2-1 warranty.
CUTTING STEEL REINFORCED CONDUCTOR IS SAFER AND MORE PRODUCTIVE
ADVANTAGES
Advantages• Widest cutting capacity — 557 kcmil
ACSR Eagle, 1” O.D.• ACSR jaws — designed to wear with
minimal to no breakage• Automatic jaw retraction — operator
button activates cut, auto retraction opens blades for next cut
• Compact inline design — light weight and well balanced
• Blade guide — blade guide aligns cutting blades to help ensure proper cutting operation and minimize binding
• Rotating head — 350 degree rotation to allow for access in many applications
• LED light — positioned to illuminate work surface
• Operation — easy single button operation with Class 2 or 4 gloves
• 100% battery compatibility — accepts all Hilti 18v and 22v lithium-ion batteries
Technical data
Cutting performance
ACSR 557 kcmil Eagle
Copper cable 1” O.D.
Aluminum cable 1” O.D.
Std. guy strand 7/16” high strength grade, 3/8” utility grade
EHS guy wire 3/8” EHS
Tool warranty. Some limitations apply. Contact Hilti for details.
Description Item number
NCT 25-A22 ACSR Adv 3576654NCT 25-A22 ACSR /bag Adv 3576655NCT 25-A22 Adv + DC 3577602NCT 25-A22 /bag Adv + DC 3577603NCT 25-A22 ACSR 3576718NCT 25-A22 ACSR /bag 3576719NCT 25-A22 ACSR + DC 3577727NCT 25-A22 ACSR /bag + DC 3577728
Fixed jaw ACSR cutting tool NCT 25-A22
we want to hear from you
The Hilti NUN 54-A22 universal cutting and crimping tool provides extreme flexibility for users who want to use one tool for multiple applications. This tool can be utilized with several different jaws to cut a variety of conductors (up to 1” in O.D.) and crimp copper (up to 600KCMIL) and aluminum conductor (up to 350 KCMIL). When utilized with the ACSR Jaw, it can cut steel reinforced conductor and guy wire commonly found in power and utility applications. The Hilti NUN 54-A22 universal cutting and crimping tool is backed by the industry leading 20-2-1 warranty.
TWICE THE PRODUCTIVITY, ONE TOOL
Universal cutter and crimping tool NUN 54-A22
APPLICATIONS AND ADVANTAGES
• Automatic jaw retraction — returns to open position once cycle is completed
• ACSR jaw compatibility — interchangeable jaws include cutting ACSR up to 447 Kcmil
• CU/AL jaw compatibility — interchangeable jaws include cutting ACSR conductors and guy wire:- Crimping copper conductors up to
600 MCM- Crimping aluminum conductors up to
350 MCM- Cutting copper conductors up to 600
MCM- Cutting aluminum conductors up to
750 MCM• Compact inline design — light weight
and well balanced• Larger operating button — one
handed quick operation with Class 2 and 4 gloves
• Rotating head — 350 degree rotation to allow for access in many applications
• LED light — positioned to illuminate work surface
• Operation — easy single button operation with Class 2 or 4 gloves
• Accepts dies for most common connection sizes — accepts W dies
Tool warranty. Some limitations apply. Contact Hilti for details.
Technical data
Dimensions 17 inches
Tool weight 5.7 lbs
Crimping performance Copper lugs / splices 8awg – 600 kcmilAluminum lugs / splices 8awg – 350 kcmil
Crimping die style compatibility U,W, X, O, BG, D3 groove
Cutting performance • Copper cable 600 kcmil*• Aluminum cable 750 kcmil*• ACSR (W/ ACSR jaw) 477 kcmil Hawk• Std. guy strand (W/ACSR jaw) 3/8”• EHS guy wire (W/ ACSRjaw) 9/32”
max. 1‐1/4” / 33 mm O.D.
Description Item number
Cutting jaws NCT J CUAL BULK 2163395Crimping jaws NCR J D3O BULK 2163392Crimping jaws NCR J D3BG BULK 2163391Crimping jaws NCR J D3 BULK 2163393Crimping jaws NCR J SU BULK 2163394Cutting jaws NCT J ACSR 2172833NUN 54-A22 SU Adv 3581170 NUN 54-A22 SU +CU/AL blade Adv 3581171 NUN 54-A22 SU 3581172 NUN 54-A22 SU + CU/AL blade 3581773
The new Hilti NCT 53-A22 cordless CU/AL cutter offers the ability to cut copper and aluminum conductor up to 2” in outside diameter, in a lightweight tool. The inline design allows users to reach into applications that larger 12 ton tools struggle to fit into. The head swivels 350 degrees to provide the access and maneuverability needed to get the job done. The NCT 53-A22 CU/AL cordless cutter is part of the growing Hilti 22v cordless platform and covered under the industry leading 20-2-1 warranty.
BIG ON CUTTING PERFORMANCE, SMALL ON SIZE
APPLICATIONS AND ADVANTAGES
• Widest cutting capacity — scissor head design with 2” opening for cutting aluminum and copper conductors
• Low weight — cuts conductors commonly reserved for 12 ton heavy tools
• Automatic jaw retraction — returns to open position once cut is completed
• Compact inline design — light weight and well balanced
• Blade guide — blade guide aligns cutting blades to help ensure proper cutting operation and minimize binding
• Rotating head — 350 degree rotation to allow for access in many applications
• LED light — positioned to illuminate work surface
• Operation — easy single button operation with Class 2 or 4 gloves
• 100% battery compatibility — accepts all Hilti 18v and 22v lithium-ion batteries
Technical data
Cutting performance
Copper cable 1000 kcmil up to 2” O.D.
Aluminum cable 1000 kcmil up to 2” O.D.
Lead jacket conductor 1000 kcmil up to 2” O.D.
Tool warranty. Some limitations apply. Contact Hilti for details.
Description Item number
NCT 53-A22 Adv. Comp. 3581774NCT 53-A22 3581775
Cordless cutter NCT 53-A22 CU/AL
• Application Versatility — various cutting and crimping jaws have been designed to fit into the tool
• 100% battery compatibility — accepts all Hilti 18v and 22v lithium-ion batteries
we want to hear from youYEAR
WEAR AND TEARCOVERAGE
20YEAR
LIMITED WARRANTY
11DAY
REPAIRTURNAROUND
Tool warranty. Some limitations apply. Contact Hilti for details.
Designed with our customers in mind, the DX 9 is engineered for the most demanding metal deck installations. Featuring an ergonomic handle, a digital service indicator and Bluetooth connectivity, the new DX 9 brings the next generation to deck fastening.
The Service Indicator displays the tool’s operating temperature range, helping you to work at the optimal pace plus provides real-time feedback on recommended cleaning and service maximizing productivity on the job. Bluetooth connectivity capabilities allow you to sync to the Hilti Connect app where you can access how-to videos, tool usage data, and a simple way to request Hilti service.
THE NEXT GENERATION IN DECK FASTENING
Powder-actuated tool DX 9
APPLICATIONS AND ADVANTAGES
Applications• Fastening metal decking to bar joists
with a thickness of 1/8” to 3/8” with X-HSN sheet metal nail (DX 9-HSN)
• Fastening metal roof and floor decking to structural steel greater than 1/4” with X-ENP 19 MXR sheet metal nail (DX 9-ENP)
Advantages• High fastening rate• Ergonomically designed handle and
upright fastening position• Reliable fastenings for roof and floor
deck
Technical data
Weight HSN/ENP 28 lb
Dimensions 39 x 18 x 7 inches
Cartridges HSN: .27 M40 6.8/11, ENP: .27 M40 6.8/18
Fasteners DX 9 HSN: HSN 24, DX 9 ENP: ENP 19
Base material thickness DX 9 HSN: 1/8" to 3/8", DX 9 ENP: >= 1/4"
Accessories
Description Item number
Sheet metal nail X-HSN 24 2042971 Sheet metal nail X-ENP-19 L15MXR 283508 DX cartridge 6.8/11M40 red 2128214 DX cartridge 6.8/11M40 red 2128211 DX cartridge 6.8/11M40 blue 2128212 DX cartridge 6.8/11M40 black 2128213 Piston X-9-HSN kit 2194236 Piston X-9-ENP kit 2194237 Nail magazine MX 9-HSN packed 2198105 Nail magazine MX 9-ENP packed 2198106
Description Item number
DX 9-HSN 2144190DX 9-ENP 2144191DX 9 HSN starter kit (30K) 3577824DX 9 HSN volume kit (90K) 3577682DX 9 ENP starter kit red (30K) 3577825DX 9 ENP volume kit red (90K) 3577823DX 9 ENP starter kit blue (30K) 3579409DX 9 ENP volume kit blue (90K) 3579408
The New Hilti NCR 60-A22 die-less crimping tool allows you to make secure, reliable connections for multiple sizes of conductors. The quick-latch head design makes the process simple and productive, allowing the user to quickly move from different diameters of conductor and terminal connections. The NCR 60-A22 is backed by Hilti’s industry leading 20-2-1 warranty that covers wear and tear, including batteries and chargers.
MAKE RELIABLE CONNECTIONS
Die-less crimping tool NCR 60-A22
APPLICATIONS AND ADVANTAGES
• Large crimping capacity — up to 500 kcmil, no dies
• Compact inline design — light weight and well balanced
• Automatic jaw retraction — returns to open position once completed
• Dieless crimping - Fast work as there’s no need to find
and swap dies on the- No lost or dropped dies
• Two stage crimping ram - The smaller 3 ton ram crimps the
smaller sizes- The larger 6 ton ram crimps the larger
sizes• LED light — positioned to illuminate
work surface• Operation — easy single button
operation with Class 2 or 4 gloves• 100% battery compatibility —
accepts all Hilti 18v and 22v lithium-ion batteries
Tool warranty. Some limitations apply. Contact Hilti for details.
Technical data
Crimping capacity 500 MCM Cu, 350 MCM AI
Rated voltage 21.6 V
Weight according EPTA-Procedure 01/2003 6.6 lb
Description Item number
NCR 60-A22 Adv 3576662 NCR 60-A22 /bag Adv 3576663NCR 60-A22 3576737NCR 60-A22 /bag 3576738
we want to hear from you
Built on the success of the revolutionary Hilti BX 3, the Hilti BX 3-A22 02 is the new standard in battery-actuated direct fastening tools, developed specifically for drywall contractors to fasten interior track to concrete and steel.
Powered by a brushless motor and Hilti’s standard 22V battery, the BX 3-A22 02 uses our “spring-belt” technology to perform applications traditionally limited to propellant-actuated tools without the hassle of gas cans or cartridge disposal. Unlike flywheel technology, the “spring-belt” technology does not cause the same wear and tear on the piston resulting
in superior fastening quality and a much longer life of the tool.
The BX 3-A22 02 delivers reliable fastening quality, lower noise level and convenience to your jobsite, backing up its powerful punch with a number of upgrades including enhanced magazine capacity, a 30% increase in speed, extended battery reach and a long list of smart features including refill indication, standby mode and Bluetooth connectivity to the Hilti Connect app.
EASE OF USE OF A GAS TOOL. RELIABILITY OF A POWDER TOOL. POWERED BY A BATTERY.
APPLICATIONS AND ADVANTAGES
Applications• Ideal for interior track fastening to concrete and steel• Designed for work in occupied spaces where lower noise level
is required• Fastening waterproofing membrane to concrete
Advantages• Battery-actuated tool with speed and productivity comparable
to gas and powder-actuated tools• No disposal of hazardous materials required• Reduced operator fatigue due to lower recoil compared to
gas-actuated tools• Maintenance free tool. The user is not required to perform any
cleaning or spare part replacement on the jobsite• Light and sound nail refill indicator for increased productivity• Bluetooth connectivity for instant access to tool usage data• Adjustable belt/scaffold hook for maximum user comfort
Technical data
Fastenings per hour Up to 650 per hour
Battery capacity (22V 5.2Ah) 800 fasteners
Fastener range 9/16 – 1-3/16 in
Magazine capacity 30 nails
Weight (w/o battery/2.6Ah/3Ah /5.2Ah)
7.7/8.8/9.0/9.5 lb
Dimensions(LxWxH) 18.3 x 5.3 x 14.5 in
Accessories
Description Item number
Nose piece X-FG B3-IF 02 2179275
Magnetic washer holder X-WH B3 02 2179277
Platon washer holder X-PH B3 02 2179278
Delta washer holder X-PHD B3 02 2179279
Description Item number
Battery-actuated tool BX 3-A22 2161625
BX 3 02 IF+ Battery(2)+Charger(1) 3577722
BX 3 02+ 27K X-C20 B3 MX + Batt.+Chrg 3578653
BX 3 02+ 27K X-P20 B3 MX + Batt.+Chrg 3578654
BX 3 02+ 27K X-S14 B3 MX + Batt.+Chrg 3578655
BX 3 02+ 27K X-P17 B3 MX + Batt.+Chrg 3578656
BX 3 02+ 10K X-C20 B3 MX + Batt.+Chrg 3578657
BX 3 02+ 10K X-C24 B3 MX + Batt.+Chrg 3578658
BX 3 02+ 10K X-S14 B3 MX + Batt.+Chrg 3578659
BX 3 02+ 10K X-P17 B3 MX + Batt.+Chrg 3578660
BX 3 02+ 10K X-P20 B3 MX + Batt.+Chrg 3578661
BX 3 02+ 10K X-P24 B3 MX + Batt.+Chrg 3578662
Description Item number
BX 3 02+ 27K X-C 20 B3 MX 3578664
BX 3 02+ 27K X-C 24 B3 MX 3578665
BX 3 02+ 27K X-S14 B3 MX 3578666
BX 3 02+ 27K X-P17 B3 MX 3578667
BX 3 02+ 27K X-P20 B3 MX 3578668
BX 3 02+ 27K X-P24 B3 MX 3578669
BX 3 02+ 27K X-C20 B3 MX(75%)/X-P14 B3 MX 3578670
BX 3 02+ 27K X-C20 B3 MX(50%)/X-P14 B3 MX 3578671
BX 3 02+ 27K X-C20 B3 MX(25%) / X-P14 B3 3578672
BX 3 02+ 10K X-C30 B3 MX + Batt.+Chrg 3578663
Tool warranty. Some limitations apply. Contact Hilti for details.
Drywall application Waterproofing application Hilti connect
Battery-actuated tool BX 3-A22 02
“spring-belt” technology
we want to hear from you
APPLICATIONS AND ADVANTAGES
• Green is 4 times more visible than red and thus improves the working range and eliminates the need for accessories to mark the beam
• Centric design for fast and easy vertical layout. For example setting out drywall tracks or pipe and electrical cable alignment
• 12V battery offers 10 hours of run time• Get 90% charged in 15 minutes
Accessories
Description Item number
Tripod PMA 20 411287Rail adapter PMA 86 2160375Wall mount with magnetic bracket PMA 85 2160374Target plate PRA 54 (CM/IN) 226976Laser receiver PMA 31G 2152388
Description Item number
PM 40-MG 3576140PM 40-MG IF 3576138PM 40-MG M&E 3576139PM 40-MG Buy 4 Get 5 3577671
With two vertical lines, perfect right angles and a 360° horizontal line, the Hilti Multiline laser PM 40-MG delivers the layout accuracy you demand and the speed you need in any indoor leveling application — from suspending ceilings and laying out drywall to leveling and aligning fixtures, pipes, doors, and windows.
The PM 40-MG fully integrates Hilti’s B12 battery platform, ensuring long run times and short charge times. Its green laser is 4 times more visible than red lasers, so you can work at distances up to 65 feet without needing accessories to mark the beam.
With a new rugged-centric design to help ensure fast and accurate layout, the PM 40-MG is the perfect complement to the Hilti family of laser layout tools including the PM 2-LG line laser, the PR 3-HVSG rotating laser and the PRI 36 high-end rotating laser and sets the level bar for drywall, electrical and mechanical applications.
Multiline laser PM 40-MGMARKING A NEW LEVEL
IN MULTILINE LASERS
Tool warranty. Some limitations apply. Contact Hilti for details.
The new Hilti task light SL 2-A12 packs a lot of illumination in a lightweight package. Put it on the ground, hang it by its integrated hook, or hold it in a free hand to put the light just where you need it to get the job done.
The SL 2-A12 is ideal for lighting up dark work areas, inspecting paint and other surface finishes and many other applications. It’s backed by Hilti’s 20-2-1 year warranty against the wear and tear of everyday commercial use, so you can be sure it will be ready to go to work when you are.
THE TASK LIGHT THAT IS HEAVY ON FEATURES BUT LIGHT ON WEIGHT
APPLICATIONS AND ADVANTAGES
• LED panel provides a light output of 500 lumens while staying cool to the touch
• Natural white light clearly illuminates dark work areas with high color accuracy
• 3-mode switch for reduced brightness in confined spaces
• Retractable hook for hands-free lighting stows safely inside the lamp body when not in use
• Adjustable LED panel rotates 360 degrees and pivots vertically to provide directional light in a variety of applications
• Illumination of unlit and poorly lit work
Tool warranty. Some limitations apply. Contact Hilti for details.
Technical data
Application temperature range -4 – 140 °F (-20 – 40 °C)
Dimensions (LxH) 7.5 x 7.7 in
Battery type Li-Ion
Voltage 12 v
Weight 1.1 lbs
Description Item number
Cordless lamp SL 2-A12 BULK 2163837SF 2H-A, SID 2-A, SFD 2-A & SL 2-A12 3578526SF 2H-A, SID 2-A & SL 2-A12 3578527SF 2H-A, SFD 2-A & SL 2-A12 3578528SID 2-A, SFD 2-A & SL 2-A12 3578529
Task light SL 2-A12
When designing this drywall anchor we focused on every detail to deliver a faster installation. The rounded edges for easy fit through the wall, the metal teeth to prevent spinning inside the wall, and the snap-neck design all compliment a quick and easy installation every time.
These improvements in design make the HTB-2 the drywall fastening solution that is ideal for a variety of hollow wall materials in a wide range of thicknesses.
FAST INSTALLATION, FLUSH FIT AND A FIRM GRIP FOR A WIDE RANGE OF MATERIALS AND SIZES
Drywall Anchor HTB-2
APPLICATIONS AND ADVANTAGES
Advantages• The thinner collar provides a flush finish• Large range of fastening thickness from
1/2” to 3”• Rounded edges make it easy to install
through the wall• Metal teeth increase grip preventing
rotation while installing the screw• Spring mechanism forces the channel
into the vertical position once installed through the wall
Applications• Partition walls, light duty hand rails,
lighting fixtures, cabinets and shelving, and TV mounts
Technical data
Base materials Drywall, Concrete (Hollow deck), Masonry (Hollow)
Environment conditions Indoor, Dry Conditions
Head configuration Inner thread
Product class Economical
Accessories
Description Item number
TE 4-A22 3462776TE 2-A22 3490214SF 2H-A 3536723
Description Item number
HTB-2 3/16 2158767HTB-2-S 3/16 PH 2158768HTB-2-S 3/16 SRH 2158769HTB-2 1/4 2158770HTB-2-S 1/4 PH 2158771HTB-2-S 1/4 SRH 2158772HTB-2 3/8 2158773HTB-2-S 3/8 SRH 2158774HTB-2 1/2 2158775HTB-2-S 1/2 SRH 2158776
Materials and workmanship warranty• We stand behind our tools. If something breaks as a result of defects in materials or
workmanship, we will repair or replace it within 20 years of purchase.
Wear and tear coverage• We will repair damaged tools at no cost for 2 years from the date of purchase.• During this timeframe, you won’t be charged for parts, labor, or even shipping.
One day guaranteed, or the repair is free• We will repair your tool the same day we receive it in our repair center. And if we don’t,
then the repair is totally free — including parts, labor, and shipping.
TOOL WARRANTYWarranty redefined.
REPAIR MADE SIMPLEOne click or a call does it all
Visit Hilti Online or call Customer Service for more information:www.hilti.com 1-800-879-8000 (U.S.) | www.hilti.ca 1-800-363-4458 (Canada)1 Some exceptions apply; grinders, SD 4500, SD 2500, gas saws, WSR corded tools
and UD and UH tools do not have wear and tear coverage. Wall saw head, remote control, and E box and wire saw power unit and control box have two year wear and tear coverage or 200 hours of usage, whichever comes first. No other components, accessories, or consumables are included.
2 Wear and tear coverage excludes damage due to abuse, or use not in accordance with the tool operator’s manual. The following consumable items are excluded from wear and tear coverage and repair or replacement of those items shall be at customer’s expense: pistons, buffers, and spring clips for powder actuated tools, pull cord assemblies and filters for gas saws and filters for vacuums.
3 One day repair turnaround time starts when the tool is received at the Tool Service Center (TSC). A repair is only eligible for one day turnaround guarantee if customer approves Repair Cost Limit (RCL) in advance; repairs with authorizations for less than the full RCL and repairs requiring quotes are not eligible. Limit of 5 tools per company per day per TSC. Tools must be received at TSC via UPS or Purolator. Any delay in credit card authorization voids the 1 day-or-free guarantee. Excluded tools include: total stations, optical devices, detection tools, wall saws, wire saws, and HAT 28. Excludes delays caused by force majeure events ( e.g. hurricanes). Extended no cost warranty does not apply to no-charge repairs.
20-2-1 warranty applies to tools only.
we want to hear from you
We designed our best-in-class Hilti Cast-in anchor KCM-WF with one goal in mind: to make every problem associated with pre-cast anchoring a thing of the past.
The KCM-WF features a versatile, multi-thread design to accommodate a variety of rod diameters, a reliable attachment system to make sure the head stays in place and right where you put it when the concrete starts flowing and a tough foam exterior that shrugs off flowing concrete, keeping it out of the threads. It comes in a variety of body and foam color options to color code and easily identify specific runs, helping you avoid costly mistakes and saving hours of time, effort and expense on the jobsite.
Combine this with our back-saving KCS-WF-ST setting tool means you can set the KCM-WF anchor quickly and easily from a standing position or when reaching through rebar.
THE WOOD FORM ANCHOR THAT STAYS WHERE IT’S PUT
APPLICATIONS AND ADVANTAGES
• Cast-in-place anchoring• Mechanical, electrical, sprinkler pipe
runs
APPLICATIONS AND ADVANTAGES
• Direct fastening onto outside thread- Pipe runs close to ceiling- Light fixtures and electrical boxes- First 2 fastening points of sloped
pipe• No need to cut short rods
Technical data
Approvals FM, UL, ICC-ES cracked concrete, ICC-ES, seismic
Technical data
Approvals FM, ICC-ES cracked concrete, ICC-ES, seismic
Accessories
Description Item number
Kwik cast setting tool KC-WF-ST 2156388
Accessories
Description Item number
1/2" to 1/2" deep socket 340649
SIW 22-A 2141090
Description Qty Body color Foam color Item number
Kwik cast KCM-WF 1/4,3/8 green-G 250 Green Green 2193277
Kwik cast KCM-WF 1/4,3/8 green-R 250 Green Red 2193276
Kwik cast KCM-WF 3/8,1/2 orange-O 150 Orange Orange 2193279
Kwik cast KCM-WF 3/8,1/2 orange-B 150 Orange Black 2193278
Kwik cast KCM-WF 3/8,1/2,5/8 red-R 100 Red Red 2193274
Kwik cast KCM-WF 3/8,1/2,5/8 red/B 150 Red Black 2193290
Kwik cast KCM-WF 3/8,1/2,5/8,3/4 grey-O 25 Grey Orange 2193275
Description Item number
KH-EZ E 1/4”x1 5/8” EXT. 3/8” 2169855
Seismic Seismic
Turn to the Hilti KH-EZ E when the application calls for an externally-threaded screw-in anchor to hold rod hangers. Reduced drilling demands and hammer-free installation combine to deliver significant time savings when compared with conventional anchoring systems, and the optimal thread design of the KH-EZ E gives it excellent holding power in a wide range of piping and electrical installations.
The KH-EZ E is especially designed for close-to-ceiling applications, does not require special bits for installation and is an ideal solution for applications requiring an ICC-ES report for cracked concrete and seismic loading.
Cast-in anchor KCM-WF EASY. EFFICIENT.
CLOSE-TO-CEILING INSTALLATIONS.
Screw anchor KH-EZ E
we want to hear from you
When your application calls for hanging pipes up to 8” in diameter, the Hilti Screw anchor KH-EZ I makes installation easy — so easy that the only tools required for installation are a 3/8” ANSI drill bit, dust removal system, and an impact wrench meaning no hammering overhead and no mess.
Featuring internal threads to accommodate a 1/2” rod, simplified OSHA 1926.1153 silica dust compliance, and 50% faster installation than traditional flush anchors, the optimized threads of KH-EZ I power through concrete and hang tough to get the big jobs done.
The only anchor in the world designed specifically for the glazing industry, the Hilti Screw anchor KH-EZ P is an ideal choice for window walls, store fronts, glass shoes and many other applications where concrete and glass come together.
Featuring a small pan head to allow more installation flexibility around the sides and top of the anchor, a reduced profile to make it easy to cover with waterproof sealant and strong threads to penetrate fast and hold strong, the KH-EZ P carries ICC-ES approval for cracked concrete and seismic loading — making it the perfect anchor choice for every glazing application.
HANG LARGE-DIAMETER PIPES THE EASY WAY
SPECIFICALLY DESIGNED FOR APPLICATIONS WHERE CONCRETE MEETS GLASS
Screw anchor KH-EZ I (1/2”)
APPLICATIONS AND ADVANTAGES
• 50% faster installation compared to traditional flush anchors
• Use a 3/8” ANSI drill bit, install a 1/2” rod
• Easy OSHA 1926.1153 silica dust compliance
a) No bore-hole cleaning necessaryb) DRS can collect drilling dust from
3/8” hole easily• FM approval up to 8” pipes
APPLICATIONS AND ADVANTAGES
• Window walls• Store fronts• Glass shoes• Easy covering with waterproofing
sealant• Fastening through access holes• Torx bit delivered with every box of
anchors
Technical data
Approval FM, ICC-ES seismic and cracked concrete pending
Technical data
Approval ICC-ES cracked concrete, ICC-ES seismic
Accessories
Description Item number
Impact socket 1/2"-11/16" shallow 305476
SIW 22-A ½ 2149754
KH-EZ 1/4"x1-5/8" I 3/8" 423472
Accessories
Description Item number
Bit holder S-BH M 50/2" 2038758
Cordless impact driver SID 4-A22 2141090
Description Item number
KH-EZ 3/8”x2 1/8” I 1/2” 2169858
Description Item number
KH-EZ P 1/4"x1-7/8" 2169856
KH-EZ P 1/4"x2-5/8" 2169857
Screw anchor KH-EZ P
Seismic
we want to hear from you
THE RIGHT SOLUTION FOR EVERY ROD ANCHORING APPLICATION
CAST-IN PLACE
Wood form Pan deck Metal deck
SNGLE THREAD
MULTI THREAD
KCS-WF KCM-WF KCM-PD KCS-MD
POST-INSTALLED
Fastest install Lowest price Highest loads
POST TENSION SLAB
REGULAR SLAB
KH-EZ I and E HDI-P HDI+ Kwik bolts
OR
Whether the job calls for anchors in new concrete on wood forms, a pan deck or a metal deck or the job calls for anchors in an existing concrete structure, the rich diversity of our Hilti family of anchors means we have the right solution.
Our anchors are made to last and designed to be strong, reliable and easy to install and use. Every detail of every anchor is examined, re-examined and improved as new
materials and processes become available, and as we work with you to understand how to make the things we make even better.
We build Hilti anchors to be the absolute best in the industry, and we’re proud to make the anchors so many people count on to get the job done, day in and day out.
we want to hear from you
Serrated cast-in anchor channel system HAC-T
Rebar channel system HAC-EDGE
APPLICATIONS AND ADVANTAGES
Applications• Fastening curtain wall brackets in
seismic relevant conditions• Installation of guide rails and doors in
elevator shafts• Fastening supports for pipes or cable
trays at walls or ceilings• Securing machines and other
equipment to floors or walls
Advantages• Reliable mechanical interlock between
serrated channel lips and channel bolt for high load resistance in longitudinal axis of channel
• Small installation torque enables easier and faster installation onsite
• Free PROFIS anchor channel software allows easy design in all three load directions per the latest strength design provisions
• Only one channel bolt type required for both channel sizes HAC-T50 and HAC-T70
• Approved solution with ICC-ES Evaluation Report ESR-3520 in accordance with AC232 for cracked concrete and seismic conditions
APPLICATIONS AND ADVANTAGES
Applications• Fastening curtain wall brackets in top-
of-slab applications with high loads in intermediate and corner conditions
• Fastening of balustrade base plates on top of thin concrete members
Advantages• Higher perpendicular shear resistance
at small edge distances and thin concrete slabs via confinement of the concrete edge
• Superior concrete breakout in perpendicular shear performance in lightweight concrete
• Comes with the right edge distance for quicker installation
• Available with serrated channel for seismic relevant applications and 3D loads
• Easy design with PROFIS software with state-of-art design model based on ESR-3520, and principles of AC232 and ACI 318
• Confinement edge plate is not structurally attached to the anchor channel, thus allowing for the shear and tension loads to be fully decoupled
Technical data
Material, corrosion Steel, Sherardized / Hot-Dip Galvanized
Base materials Concrete (cracked), Concrete (uncracked)
For additional technical information and available sizes visit www.hilti.com
Description Item number
Anchor channel HAC-T50 106/300 F 2152093
Anchor channel HAC-T50 106/350 F 2152094
Anchor channel HAC-T50 106/450 F 2152095
Anchor channel HAC-T50 106/800 F 2152097
Anchor channel HAC-T70 175/300 F 2152098
Anchor channel HAC-T70 175/350 F 2152099
Anchor channel HAC-T70 175/450 F 2152100
Anchor channel HAC-T70 175/800 F 2152102
Anchor channel HAC-T50 356/300F CRFoS U 2189730
Anchor channel HAC-T50 356/350F CRFoS U 2189731
Anchor channel HAC-T50 356/450F CRFoS U 2189732
Anchor channel HAC-T70 420/300F CRFoS U 2189733
Anchor channel HAC-T70 420/350F CRFoS U 2189734
Anchor channel HAC-T70 420/450F CRFoS U 2189735
Rebar channel HAC-T50 106/300 F EDGE 2200884
Rebar channel HAC-T50 106/450 F EDGE 2200886
Rebar channel HAC-T50 106/300 F EDGE C 2201071
Rebar channel HAC-T50 106/450 F EDGE C 2201072
T-head bolt HBC-T M12x60 8.8F 2152673
T-head bolt HBC-T M12x80 8.8F 2152674
T-head bolt HBC-T M16x60 8.8F 2152675
T-head bolt HBC-T M16x80 8.8F 2152676
T-head bolt HBC-T M20x80 8.8F 2152679
For technical data and additional sizes please visit www.hilti.com or contact Hilti
Engineered especially for use in seismic relevant conditions and applications that require reliable load transfer in longitudinal axis of the channel, the new addition to the HAC anchor channel family, the HAC-T, keeps everything in place even if the earth moves.
The HAC-T is a system comprised of a v-shaped channel with serrated lips and matching T-bolts which form a strong mechanical interlock. Because of this positive connection, the load transfer doesn’t need to rely on a high installation torque which provides increased safety and productivity, as well as a higher installation comfort onsite.
Combining features with an ICC-ES report ESR-3520, the HAC-T anchor channel system provides the best value for money for cracked concrete and seismic conditions in accordance with AC232.
As the name already reveals, the HAC-EDGE is a new addition to the HAC cast-in anchor channel portfolio which has been designed to fulfill the desire of positioning the fastening points for top-of-slab curtain wall and handrail applications as close to the concrete edge or corner as possible.
The new HAC-EDGE enables the transfer of high shear loads towards the free concrete edge by confining the edge. Delivered with the right pre-configured edge distance and with nail holes in the confinement edge plate the installation into formwork becomes easy and fast.
Engineers will appreciate the easy design with the PROFIS software with a state-of-art design model that is based on ESR-3520, and principles of AC232 and ACI 318.
HOLDS STRONG, EVEN IF THE EARTH MOVES
GAIN AN EDGE
Tool warranty. Some limitations apply. Contact Hilti for details.
we want to hear from you
APPLICATIONS AND ADVANTAGES
• Suitable for use in un-cracked concrete, cracked concrete, and grout filled CMU with all anchor rods and rebar per ICC-ES approval (International Code Council — Evaluation Service)
• Anchoring light structural steel connections (e.g. steel columns, beams)
• Rebar doweling / connection of secondary post-installed rebar
• SafeSet technology — automatic hole cleaning with TE-CD / TE-YD hollow drill bits
Technical data
Base material Un-cracked concrete, cracked concrete, grout-filled CMU
Cleaning procedure Automatic cleaning (SafeSet hollow drill bit), manual hole cleaning 2x2x2
In-service temperature range -40°F - 158°F
Storage and transportation temperature min. 25°F
Storage and transportation temperature max. 77°F
Accessories
Description Item number
Mixing Nozzle HY/RE 337111
HIT-HY 100 is the everyday fast-cure mortar that provides the quality you’ve come to expect from Hilti anchors at an economical price. HIT-HY 100 has approvals for cracked and un-cracked concrete and grout filled CMU, making HIT-HY 100 more versatile for rebar doweling and anchoring.
Take reliability, safety, and productivity to a new level with HIT-HY 100 and SafeSet technology by eliminating the manual hole cleaning step. With the TE-CD and TE-YD hollow bits and the VC 150 and VC 300 series vacuums, you can increase productivity up to 60% while ensuring correct hole preparation and OSHA 1926.1153 Table 1 compliance.
EVERYDAY SOLUTION FOR FAST-CURE CHEMICAL ANCHORING
Fast cure portfolio Slow cure portfolio Masonry
HIT-HY 200 HIT-HY 100 HIT-HY 10 Plus HIT-RE 500 V3 HIT-RE 100 HIT-HY 270
Performance ★★★ ★★ ★ ★★★ ★★ ★★★Productivity ★★★ ★★★ ★★ ★★★ ★★★ ★★★Reliability ★★★ ★★★ ★★★ ★★★ ★★★ ★★★Cost ★ ★★ ★★★ ★ ★★ ★
Hybrid mortar HIT-HY 100
Hilti sets a new benchmark for masonry anchoring, HIT-HY 270 incorporates SafeSet technology for CMU and clay bricks with holes to reliably and safely set anchors while providing an OSHA 1926.1153 Table 1 compliant solution for drilling. HIT-HY 270 includes new base materials and applications to our approvals, as well as improved spacing and edge distances. Simplify masonry anchoring on your next project with Hilti HIT-HY 270.
A NEW BENCHMARK FOR MASONRY ANCHORING
Injectable mortar HIT-HY 270
APPLICATIONS AND ADVANTAGES
• Provides strong, reliable and easily installed fastenings in a variety of masonry base materials
• Suitable for indoor and outdoor applications as well as use in dry and wet hole conditions
• Performs reliably, even when the size and location of bricks and voids are unknown
Accessories
Description Item number
HIT-SC 12X50 Composite sleeve 375979HIT-SC 12X85 Composite sleeve 375980HIT-SC 16X50 Composite sleeve 375981HIT-SC 16X85 Composite sleeve 375982HIT-SC 18X50 Composite sleeve 360485HIT-SC 18X85 Composite sleeve 360486HIT-SC 22X50 Composite sleeve 273662HIT-SC 22X85 Composite sleeve 284511HIT-SC 26X125 Composite sleeve 360487HIT-SC 26X200 Composite sleeve 360488
Description Item number
Injectable Mortar HIT-HY 270 330/1 2194247Injectable Mortar HIT-HY 270 500/1 MC (20 pcs) 2194248
we want to hear from youwe want to hear from you
Control your tools and your costs
TOOL FLEETMANAGEMENT
WHAT IS TOOL FLEET MANAGEMENT?With Tool Fleet Management, you get our newest tools at a fixed monthly rate for a pre-defined period. That means you can focus on your project while we focus on managing your tools.
Learn more about how Tool Fleet Management works
EXPLORE FLEET MANAGEMENTFrom complete transparency and total reliability to reduced overall spending on tools — there is a long list of benefits that come with your Tool Fleet Management plan.
See all the benefits of Tool Fleet Management
Hear what our Fleet customers are saying
ADD TOOLS ON DEMANDNeed a tool for a special job or just for a shorter period of time? Put our high-performing tools to work when and where you need them.
Discover Tools on Demand
DON’T TAKE OUR WORD FOR IT For years, Tool Fleet Management has been increasing productivity for real people in real situations.
Hear what our Hilti customers have to say about our Tool Fleet Management
We understand that managing an entire tool portfolio is a massive undertaking. With Tool Fleet Management, you can eliminate many of the headaches and up-front expenses associated with tooling up. We’ll provide the tracking, coverage, and upgrades that keep your tools — and your team — running at peak performance.APPLICATIONS AND
ADVANTAGES
• Good performance in cracked and uncracked concrete
• Approved for use in grout filled CMU• SafeSet technology — automatic hole
cleaning with TE-CD / TE-YD hollow drill bits
Technical data
Base material Un-cracked concrete, cracked concrete
Cleaning procedure Automatic cleaning (SafeSet hollow drill bit), manual hole cleaning 2x2x2
In-service temperature range -40°F - 158°F
Storage and transportation temperature min. 25°F
Storage and transportation temperature max. 77°F
Accessories
Description Item number
Mixing Nozzle HY/RE 337111
When your application calls for a strong bond and a slow-cure, HIT-RE 100 is the everyday slow-cure mortar that provides the quality you’ve come to expect from Hilti anchors at an economical price. With approvals for cracked and un-cracked concrete, HIT-RE 100 is versatile for rebar doweling and anchoring applications.
HIT-RE 100 and SafeSet technology eliminates the manual hole cleaning step. With the TE-CD and TE-YD hollow bits, and the VC 150 and VC 300 series vacuums, you can increase productivity up to 60% while ensuring correct hole preparation and OSHA 1926.1153 Table 1 compliance. Take reliability, safety, and productivity to a new level.
EVERYDAY SLOW-CURE CHEMICAL ANCHORING
Epoxy mortar HIT-RE 100
Fast cure portfolio Slow cure portfolio Masonry
HIT-HY 200 HIT-HY 100 HIT-HY 10 Plus HIT-RE 500 V3 HIT-RE 100 HIT-HY 270
Performance ★★★ ★★ ★ ★★★ ★★ ★★★Productivity ★★★ ★★★ ★★ ★★★ ★★★ ★★★Reliability ★★★ ★★★ ★★★ ★★★ ★★★ ★★★Cost ★ ★★ ★★★ ★ ★★ ★
we want to hear from you
WHAT IT TRACKS
ON!Track is designed to manage all of your assets, regardless of brand or manufacturer, and can track more than just tools.
WHAT ON!TRACK CUSTOMERS ARE SAYING
We had tried another scan tracking system and it was a miserable failure because they sold us an absent implementation and only offered support on the internet and phone. Hilti showed us a great implementation by coming out and training and implementing
the program with us. (very important service if you don’t already know)— Mike Moore, President
ADEP GROUP ”“
ON!TRACK ASSETMANAGEMENTWith transparency comes efficiency
The biggest jobsite efficiency killers are tool and other assets that are broken or not where they need to be. These problems don’t just slow you down, they also cost you money. We can help make it easier to keep track of your tools and other assets with ON!Track Asset Management.
CONTACT OUR ON!TRACK PROSOur friendly and expert U.S. based customer service team is ready to help. Phone: 1-866-879-4578 l Email: [email protected]
HOW ASSET MANAGEMENT WORKS
Our specially trained team members will visit your work site to learn about your unique needs and design and implement a solution that’s tailored for you. We combine the latest technology with jobsite-friendly processes to make sure you can always answer questions like, “Where is that tool?” and “Who was using it last?”
• Hardware: Data Matrix (2D Barcode) adhesive, metal plate, and hanger tags.
• Software: Cloud-based and free smartphone app (iOS and Android). With unlimited users.
• Service: Onsite consultation, asset tagging, onsite training, data upload, complete with best in class customer support.
we want to hear from you
HILTI CONNECTHassle-free tool services at your fingertips.
Dealing with tool repairs on a jobsite is a hassle, and finding answers to the questions you have is never easy. Is this tool under warranty? How many times has it been repaired? How much money has been spent on this tool? Should it be repaired or replaced? Hilti Connect can help you answer all those questions.
See all the benefits of Hilti Connect
Hear about how easy it is to use the Hilti Connect
HOW DOES IT WORK?There are three things make up the whole Hilti Connect experience. The app, the NFC tag, and the Hilti Cloud. Once logged into the app with your Hilti Online login credentials, you can search for the tool you want by serial number or by scanning the NFC tag. After scanning a tool, the app links to the Hilti Cloud and pulls in all the data and documents for that tool.
WHAT IS HILTI CONNECT?Hilti Connect is a new phone app that allows you to identify your tool with NFC technology, find detailed tool information such as warranty and fleet expiration dates, and see how many times a tool has been repaired. The app also allows you to submit your tools for repair right from your smartphone.
HOW DO I KNOW IF MY TOOL IS NFC ENABLED?Any Hilti tool that is NFC enabled will have a “Connected” symbol on the rating plate of the tool. Place your phone in that location and it will read the NFC tag and take you to the Hilti Connect App.
WHAT ELSE CAN I DO WITH HILTI CONNECT?Hilti Connect gives you access to operators manuals, OSHA silica dust documents, how to videos and instructions. It shows you related products when you are looking for a replacement blade, bit, or chisel. Hilti Connect also connects via Bluetooth to some of our powder and battery-actuated tools to display usage information such as how many shots you have done, and when it needs to be sent in for repair or maintenance, as well as the last seen location.
Hilti Connect can be downloaded for free from the Google Play store or the App Store right to your smart phone.
we want to hear from you
MAXIMUM EFFICIENCYTight timeline? Count on us.
Custom solutions to help you finish on time and under budget
PROJECT MANAGEMENTOFFICE
We measure and cut
• We’ll ship your pre-measured and pre-cut materials direct to your job site for immediate installation, reducing your labor and scrap costs, and eliminating cutting-related injuries.
We kit
• Kits are packaged with all components needed for assembly.
• Minimize freight costs with conveniently boxed kits that can be easily transported to any location.
Get more information about the complete lineup of services provided by the Hilti Project Management Office
We assemble
• Pre-assembled materials arrive ready for immediate installation.
• Save assembly time and on-site storage space, decrease inventory management costs, and shorten your construction schedule.
From design to execution, our Project Management Office is here to make your job easier with a unique mix of services including structural design calculations, AutoCAD® details, Professional Engineer (PE) stamping, cutting, kitting, and preassembly. No matter how complex your project is, our cross-functional team of engineers, bid and proposal managers, and logistics experts are here to help.
ENGINEERING EXPERTISESoftware and support to tackle any job
Structural engineering
• PROFIS design and calculation software
• Signed and sealed drawings from independent Hilti-accredited structural engineers
Plant design modeling
• Libraries for the main 3-D plant design software (Aveva PDMS™, Intergraph SmartPlant™)
Detail and shop drawings
• Library of components for common AutoCAD systems