Flow Measurement - Bar Instruments€¦ · Pulsar Process Measurement Leading the world in non-contacting level and flow measurement Pulsar ® Process Measurement Ltd. Cardinal Building

www.pulsar-pm.com

Pulsar ProcessMeasurementLeading the world in non-contactinglevel and flow measurement

Pulsar® Process Measurement Ltd.Cardinal BuildingEnigma Commercial CentreSandy's RoadMalvernWorcestershireWR14 1JJEnglandTel: +44 (0) 1684 891 371Fax: +44 (0) 1684 575 985Email: [email protected]

FlowMicroFlow

• Use with a dB3 transducer and sun-shielded temperature sensor or dB3 with twin sun-shield for MCERTs Class 1 measurement

• 4-20mA, 5 relay outputs• Optional Profibus DP or Modbus communication v0 & v1• Optional data logging• Calculation of flow optimisation, 32-point linearisation• AC or DC power supply

FlowCERT LiteMCERTs Class 1 flow measurement

Flow

• Use with Speedy velocity sensor or MicroFlow• 2x 4-20mA, 5 relay outputs• Optional Profibus DP v0 & v1or Modbus communication• Optional data logging• Calculation of flow optimisation, 32-point linearisation• AC or DC power supply• IP65

FlowCERTHigh-accuracyopen channel flowmeasurement

Flow

• Accurate and repeatable• Velocity x area calculation a low cost alternative to PMD • Minimal installation costs, no interruption to service• Maintenance-free• RS485 Modbus output, can be converted in Pulsar Velocity

Interface to mA or relay• Compatible with Pulsar controllers FlowCERT and Ultimate

for velocity x area flow measurement solution

2x MICROFLOW SENSORS WITH FLOWCERT CONTROLLERS AND DBMACH3 TRANSDUCERS

Flow PulseNon-invasive flow measurement

Flow

OPTIONS INCLUDE FIXED INSTALLATION WALLMOUNTED FLOW MONITOR AND FLOW PULSE

HANDHELD FOR PORTABLE FLOW MONITORING

• No moving parts, vibration-proof• Detects foreign objects within the process• Detects flow/no flow of solids• Material route/flow verification• Bearing failure alarm• 24VDC supply and 0-10V output• ATEX EEx ia options• Fits pipes, chutes and feed hoppers

Non-invasive acoustic sensorFlowPulsarGuard 2010 Series

Vibrating Probes200 Series• No moving parts• Strong, stainless steel build • Tip sensitive - immune to wall

cling• Sharp blade prevents material

build-up• No calibration required• High temp. version 150ºC• Rigid tube and cable

extensions available• EEx ia versions available

Rotating Paddles300 Series• Robust, high reliability switching• High, demand and low level• Low-cost polypropylene

versions• High strength stainless steel• Cable and rigid extension

options• High temp +350ºC option• ATEX dust EEx ia Zone 20/21

option

PressureTransducers700 Series• High stability• ATEX EEx ia options available• Choice of pressure connections• Submersible, low range and

general purpose versions

Float Switches800 Series• High quality & reliability, low cost• Up to 13A current switching• Adjustable pumping range• High quality cable entry seal• Pump up, pump down or SPDT• Resistance to turbulence• Choice of mounting straps and

cable weights• 3m or 10m leads as standard

(longer on request)• SPDT version offers Hi or Lo alarm

Completing the range: When you don’t need complex solutions, just reliability and qualityOther Level Devices Level

• Simple installation – simply fix the unit to the outside of a pipe. IP68.

• DC supply• Version 1 (30-350mm), Version 2 (30-1250mm)• Flow range of 0.3m/s to 4m/s.

10m/s high flow version available• Outputs: RS485 and 4-20mA and 1 relay• Repeatability of approximately ±5%• Fully potted and fast response versions

FLOWCERT LITE + DB3 + INTERNAL TEMPERATURECOMPENSATION WITH TWIN SUN-SHIELDSMCERTS CLASS 1, 0.193% ACCURACYSIRA MC090155/00

Non-contacting Microwave LiquidVelocity Sensor

SPEEDY VELOCITY SENSOR

MICROFLOW WITH (TOP)ULTIMATE CONTROLLER AND(BOTTOM) FLOWCERT FORVELOCITY X AREACALCULATIONS

Pulsar® is a registered trademark of Pulsar ProcessMeasurement Ltd. in the UK, USA and China.

Literature number: 6ppENG/MHA/10-16

Volume

VolumeIMPIMP : self containedmeasurementwithout compromise

• Calibrate without compromising the IP67 rating• Mounts on 1.5” universal thread (2” on IMP 10)• Easy to calibrate settings menu on display• Narrow beam angles• 3m, 6m and 10m range versions• 4-20mA loop powered• 2 relays (DC mode)• ‘Lite’ version with 4-20mA output only• Low power consumption and fast response• Intrinsically Safe (I.S.) version available

dBi TransducersdBi Series of Intelligent Level Transducers

Level

From 0mm to50m. High powerand narrowbeam angles

Versatilemultifunctionalcontrollers

• Multiple configurations: level, volume, pump control, open channel flow

• Compatible with the full range of transducers, dB3 (3m) to dB50 (50m)

• Mounting: panel, fascia, wall or rack versions• Choice of output: 3 or 5 relays, 4-20mA• Optional Modbus or Profibus DP v0 and v1 communication• Optional data logging• Calculation of flow optimisation, 32-point linearisation• Sophisticated tank functions for volume calculations• AC or DC power supply• IP65 wall mount, IP64 fascia, IP54 panel

Ultra 3 & 5Ultra Twin

BlackboxUltrasonic systemwith range ofoutputs

Level Volume

ULTRA 3 RACK MOUNT

ULTRA 5 WETWELL CONTROL

• For use with Blackbox, Ultra, Zenith, Quantum and Ultimate • Special dBMACH3 (0mm deadband) transducer for open

channel flow• IP68• 1000m maximum between transducer and controller• PVDF, PTFE chemical resistant faces and solid application

(aiming kit) options• ATEX Zone 1 standard. FM option available• Optional Intrinsically Safe (I.S.) ATEX Zone 0

Level Sludge Blanket

• Self-cleaning transducer• Simple installation and reduced maintenance• Suitable for all types of sludge (primary,

secondary, tertiary and industrial)• 0.5% density threshold minimum• Flexible, immersible mounting rod • Relay output, 2 x 4-20mA outputs• Viewable profile of sludge blanket• Dual Channel unit

Ultrasonic sludgeinterface controller

Sludge Finder 2

Level FlowVolume Pump Control

• Programmable via PC or handheld programmer• Compatible with the full range of transducers,

dB3 (3m) to dB40 (40m)• Outputs (depending on model):

• 2 relays and 4-20mA• 2 relays and 0-5V• 2 relay output and Modbus or Profibus

• Low power data logging version• Optional volume calculations display• AC or DC power supply• IP66 with keypad, IP67 without keypad

• Advanced pump control functions• Compatible with dB series transducers, dBMACH3 (0m)

to dB40 (40m)• 8 digital inputs, 8 digital outputs and 2 mA outputs built

in, expandable with interface modules• Dedicated web server remote control• Optional infra red camera• Logical, colour touch-screen setup• Optional battery backup• Extensive data logging for Asset Management, Predictive

Maintenance and Compliance• Pump Performance Indicator, API Asset Performance

Index and pre-blockage detection plus optional pump reversing

• Interface with flow monitors such as Flow Pulse • RTU with Wi-Fi and GPRS/3G options. DNP3 (WITS 1.1)• IP64 fascia, IP65 wall

Ultimate Controller

Complete pump process control. Ultrasoniclevel, flow control and RTU

Zenith &Quantum

Intelligent controlsystems forpumping stationcontrol

Pump Control

ZENITH, QUANTUM ANDULTIMATE CONTROLLERAPPLICATIONS

• Advanced pump control functions• Compatible with dB series transducers,

dB3 (3m) to dB40 (40m)• Optional 6 or 10 relay outputs, 7 digital

inputs, 4-20mA output• Optional Modbus or Profibus DP v0 or v1

communication• Optional data logging• AC or DC power supply• IP64

• DATEM ( digital echo processing )• Non-contacting level and volume measurement• IP68• 2 models HART protocol (version 7) or Profibus PA (3.0.2)• Low power consumption• Solids or liquids applications, available in 4 versions

125mm to 15m for each protocol• ATEX Ex mb Zone 1 standard• Option of ATEX Zone 0 I.S.

dB Transducers for use with Pulsar Controllers (2 part system)

Pulsar Process Measurement Limited operates a policy of constant developmentand improvement and reserves the right to amend technical details as necessary

Volume

Level

Level Volume

ULTRA 3 RACK MOUNT

Sludge Finder 2