Embed Size (px)
Citation preview
WITH RELATED ACCESSORIES
FLOORSTANDS& PEDESTALS
www.trumbull-mfg.com
Phone: 330.799.3333Toll Free: 800.677.1799
Fax: 330.797.3215
Trumbull Industries, Inc.1040 N. Meridian Rd.P.O. Box 1556 Youngstown, Ohio 44501
Typical Floorstand installation
TRUMBULL 30″ INDICATING FLOORSTANDS are designed for installation in treatment plants and pump stations to allow operation of valves at a lower elevation. Floorstand body is ductile iron for increased torque capacity. Set screw secures handwheel to stem. Flange can be machined to facilitate mounting of actuator, if required (also available with gear operators). Standard stem threading allows up to 140 turns; optional threading allows up to 563 turns. Stainless drive pin supplied with assembly. See page 9 for custom Floorstand options.
1. Quantity required 2. Floorstand item number: 367-2420 3. O.D. of extension stem being used, for drilling of connecting couplings 4. Wall Bracket, if required a. Ductile iron item number: 367-2451 b. Stainless steel item number: 367-2461
1-1/4" CARBON STEEL STEM extends 20" below mounting
surface; coated with food grade
Xylan 1052 for corrosion
protection and lubricity.
For stems requiring more than
322 turns, stainless stems will
be furnished.
BRONZE POSITION INDICATOR
“OPEN” LETTERS cast in Floorstand
ALUMINUM “CLOSED” TAG supplied with drive rivets.
To be fi eld installed based on
number of valve turns.
BRONZE BUSHING to center stem
SLOTTED BOLT HOLES provide adjustability
to avoid interference
with rebar
CAST IRON STEM COUPLING pre-drilled to 15/16"
diameter for 7/8" O.D.
stem, with pilot hole for
5/16" stainless drive pin
(furnished)
Page 2
Ordering Instructions
30” INDICATING FLOORSTANDDuctile Iron
Page 3
www.trumbull-mfg.com
Phone: 330.799.3333Toll Free: 800.677.1799
Fax: 330.797.3215
Trumbull Industries, Inc.1040 N. Meridian Rd.P.O. Box 1556 Youngstown, Ohio 44501
Ordering Instructions
Typical Floorstand installation
TRUMBULL 36″ DUCTILE IRON INDICATING FLOORSTANDS are designed for installation in treatment plants and pump stations to allow operation of valves at a lower elevation. Set screw secures handwheel to stem. Flange can be machined to facilitate mounting of actuator, if required (also available with gear operators). Standard stem threading allows up to 196 turns; optional threading allows up to 784 turns. Stainless drive pin supplied with assembly. See page 9 for custom Floorstand options.
LEXAN WINDOW seals indicator slot yet
provides view of bronze
position indicator
1. Quantity required 2. Floorstand item number: 367-2421 3. O.D. of extension stem being used, for drilling of connecting couplings 4. Wall Bracket, if required a. Ductile iron item number: 367-2451 b. Stainless steel item number: 367-2461
Page 4
36” INDICATING FLOORSTANDDuctile Iron — Sealed Indicator Slot
1-1/4" CARBON STEEL STEM extends 14" below mounting
surface; coated with food grade
Xylan 1052 for corrosion
protection and lubricity.
For stems requiring more than
448 turns, stainless stems will
be furnished.
BRONZE POSITION INDICATOR
“OPEN” LETTERS cast in Floorstand
ALUMINUM “CLOSED” TAG supplied with drive rivets.
To be fi eld installed based on
number of valve turns.
BRONZE BUSHING to center stem
SLOTTED BOLT HOLES provide adjustability
to avoid interference
with rebar
CAST IRON STEM COUPLING pre-drilled to 15/16"
diameter for 7/8" O.D.
stem, with pilot hole for
5/16" stainless drive pin
(furnished)
Page 5
www.trumbull-mfg.com
Phone: 330.799.3333Toll Free: 800.677.1799
Fax: 330.797.3215
Trumbull Industries, Inc.1040 N. Meridian Rd.P.O. Box 1556 Youngstown, Ohio 44501
Ordering Instructions
Typical Floorstand installation
TRUMBULL 36″ STAINLESS STEEL INDICATING FLOORSTANDS are designed for installation in treatment plants and pump stations to allow operation of valves at a lower elevation. Stainless steel drive pin secures handwheel to stem. Flange can be machined to facilitate mounting of actuator, if required (also available with gear operators). Standard stem threading allows up to 196 turns; optional threading allows up to 784 turns. See page 9 for custom Floorstand options.
1. Quantity required 2. Floorstand item number: 367-2431 3. O.D. of extension stem being used, for drilling of connecting couplings 4. Stainless steel Wall Bracket, if required: item number: 367-2461
Page 6
STAINLESS INDICATING FLOORSTAND36" Length with Sealed Indicator Slot
LEXAN WINDOW seals indicator slot yet
provides view of bronze
position indicator
1-1/4" STAINLESS STEEL STEM extends 14" below
mounting surface
BRONZE POSITION
INDICATOR
“OPEN” LETTERS cast in Floorstand
ALUMINUM “CLOSED” TAG supplied with drive rivets.
To be fi eld installed based on
number of valve turns.
BRONZE BUSHING to center stem
SLOTTED BOLT HOLES provide adjustability
to avoid interference
with rebar
STAINLESS STEEL STEM COUPLING
pre-drilled to 15/16" diameter
for 7/8" O.D. stem, with pilot
hole for 5/16" stainless drive
pin (furnished)
Page 7
www.trumbull-mfg.com
Phone: 330.799.3333Toll Free: 800.677.1799
Fax: 330.797.3215
Trumbull Industries, Inc.1040 N. Meridian Rd.P.O. Box 1556 Youngstown, Ohio 44501
Typical installation
TRUMBULL 32” DUCTILE IRON PEDESTALS are designed for installation in treatment plants and pump stations to allow operation of valves at a lower elevation.
Pedestals can be adapted for various custom requirements such as mounting of electric motor operators, manual gear operators, or customer-supplied components. Also available in fabricated stainless steel or carbon steel in various heights.
Pedestal Base Dimensions
Pedestal Dimensions
Page 8
2-PART EPOXY
COATING Tnemec
140-1211
32" Ductile Iron Pedestal
32” DUCTILE IRON PEDESTALMulti-Purpose . . . MANY POSSIBILITIES!
DUCTILE IRON CASTING for added
strength
Item number: 367-2417Weight: 41.30 lbs.
SLOTTED BOLT HOLES
provide adjustability
to avoid interference
with rebar
www.trumbull-mfg.com
Phone: 330.799.3333Toll Free: 800.677.1799
Fax: 330.797.3215
Trumbull Industries, Inc.1040 N. Meridian Rd.P.O. Box 1556 Youngstown, Ohio 44501
30”
IND
ICA
TIN
G F
LOO
RSTANDS, 36” DI AND SS INDICATIN
G FLO
OR
ST
AN
DS . . .
Non-Indicating
Floorstand
Bevel Gear + Position
Indicator + 2” Nut
Rising Stem
Floorstand
Worm Gear +
Spinner/Crank Handwheel Bevel Gear
+ Handwheel
Miter Gear +
Handwheel
Miter Gear + Position
Indicator + Handwheel
Electric Motor
Floorstand +
Position Indicator
Bevel Gear+ Position
Indicator +Handwheel
FLOORSTAND OPTIONS
Miter Gear +
2” Nut
1/4 Turn Handle
These are just a FEW of the possible options to fi tyour specifi c FLOORSTAND/PEDESTAL APPLICATIONS!
MANY OTHER COMBINATIO
NS!
Page 9
www.trumbull-mfg.com
Phone: 330.799.3333Toll Free: 800.677.1799
Fax: 330.797.3215
Trumbull Industries, Inc.1040 N. Meridian Rd.P.O. Box 1556 Youngstown, Ohio 44501
SEALED ASSEMBLY
Page 10
BENCH STAND LIMIT SWITCHESFor remote operation.For use with hazardous gasses.
Variety of sealing materials
are available.
For rising stem valves.
Keeps threads out of tank.
CUSTOM FLOORSTAND APPLICATIONS
30” FLOORSTANDS . . .operate valves ranging from 140 turns up to 563 turns. 36” FLOORSTANDS . . .operate valves ranging from 196 turns up to 784 turns.
CUSTOM STEM THREADING
www.trumbull-mfg.com
Phone: 330.799.3333Toll Free: 800.677.1799
Fax: 330.797.3215
Trumbull Industries, Inc.1040 N. Meridian Rd.P.O. Box 1556 Youngstown, Ohio 44501
FLOORSTAND ACCESSORIES
WALL BRACKETS
PADLOCK ADAPTER
Page 11
HANDWHEELS
ADAPTER FLANGES
THRUST BEARING ASSEMBLY
WATERWORKS DISTRIBUTION PRODUCTS
WATERWORKS TOOLS & KEYS
HYDRANT PARTS & ACCESSORIES
TRUMBULL INDUSTRIES, INC.1040 N. Meridian Rd., P.O. Box 1556, Youngstown, Ohio 44501
Phone: 330.799.3333 Toll Free: 800.677.1799 Fax: 330.797.3215
www.trumbull-mfg.com
Contact us at . . .
For Additional
Log on to trumbull-mfg.com for more info!
February 2015
TRUMBULL PRODUCTS
