Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
www.klinsystem.com
FLOOR SOLUTION TECHNOLOGY
L32RX Productivity rates
Grinding and Polishing Concrete 7 Step
Floor Preparation 1 Step
Polishing Terrazzo 5 Step
Resin, varnish and coating removal 1 Step
Grinding and Polishing Marble 5 Step
Grinding and Polishing Granite 7 Step
25 - 30 Sqm/h
100 - 130 Sqm/h
30 - 40 Sqm/h
100 - 150 Sqm/h
20 - 30 Sqm/h
10 - 15 Sqm/h
NOTE: production rates may vary according to the surfaceconditions, diamond tools used, equipments, operator, etc.
TECHNICAL DATA
Power
Working Width
Voltage
Weight
Amperage
Variable Speed
Tool diameter
Tool holder diameter
Application
Dust-vacuum
Water Tank capacity
Water Pump
15 Kw - 20 Hp
820mm
380-400 V - 50 Hz
710 Kg
Max 32 Amp
300 - 1300 rpm
230mm / 9”
3 x 230mm / 9”
Wet / Dry
Yes
46 Lt
Yes
NEW 3RD WHEEL AND LARGER TIRESThe newly designed 3rd wheel facilitates moving the machine.New pins on the wheels allow for moving the machine without using the RC unit.
INTUITIVE TOUCHSCREEN PANEL / HMINew HMI provides essential operating information and implements operators’ instructions. • Indications of power supply and power consumption• Machine load and hours worked• Tool holder rpm and option to choose rpm setting with tool input• Water supply and lights activation• Maintenance reminders
NEW INTELLIGENT REMOTE CONTROLPrecise control over the machine two sensitive thumbsticks control its position and offset, including integrated mapping on the offset. A wide range of functions. Super light and easy to use with ergonomic rubber grip.RC Battery (rechargeable) AA 1,2V
L 32 RX: 3 heads professional floor grinder fitted with a powerful 15 Kw - 20 Hp Siemens motor equipped with New Remote Control System. Suitable for grinding and polishing Concrete and Natural Stone surfaces on large areas. Thanks to the forced counter rotating planetary system (820mm) provide a considerable saving of labor and work time. Equipped with 3-position weight adjustment system to allows to balance the weight of the machine forward or backward to increase or decrease the working pressure. It also facilitates the transport and tilting of the machine for tool change. Wide pneumatic wheels allow easy maneuverability on the work area, good grip and no marks on the floor.
REMOTE CONTROL
Quick ChangeMetal Bond
VariableSpeedL 32 RX L 32 RX
SPECIAL BATTERY SYSTEM ON BOARDThe machine is equipped with a special battery system which allows you to move the machine without problems on site without connecting the electric cable. This also simplifies the loading and unloading operations.
www.klinsystem.com
FLOOR SOLUTION TECHNOLOGY
L 32: 3 heads planetary floor grinding and polishing machine. Fitted with 15 Kw - 20 Hp - 400 V motor. The most performing machine of this segment. Suitable for grinding and polishing marble, terrazzo, granite and concrete floors. Also ideal for floor preparation, bush-hammering and coatings removal. Equipped with 3-position weight adjustment system to allows to balance the weight of the machine forward or backward to increase or decrease the working pressure. Very powerful and heavy machine for working on large areas, with total weight of more than 685 kg. Good choice for professionals.
TECHNICAL DATA
Power
Working Width
Voltage
Weight
Amperage
Variable Speed
Tool diameter
Tool holder diameter
Application
Dust-vacuum
Water Tank capacity
Water Pump
15 Kw - 20 Hp
820mm
380-400 V - 50 Hz
685 Kg
Max 32 Amp
300 - 1300 rpm
230mm / 9”
3 x 230mm / 9”
Wet / Dry
Yes
46 Lt
Yes
L32 Productivity rates
Grinding and Polishing Concrete 7 Step
Floor Preparation 1 Step
Polishing Terrazzo 5 Step
Resin, varnish and coating removal 1 Step
Grinding and Polishing Marble 5 Step
Grinding and Polishing Granite 7 Step
25 - 30 Sqm/h
100 - 130 Sqm/h
30 - 40 Sqm/h
100 - 150 Sqm/h
20 - 30 Sqm/h
10 - 15 Sqm/h
NOTE: production rates may vary according to the surfaceconditions, diamond tools used, equipments, operator, etc.
Quick ChangeMetal Bond
VariableSpeedL 32L 32
TWO LED LIGHTS FOR MONITORING THE FLOORA detachable LED light (with a magnet) improves visibility, and a second LED light attached in the back of the machine near the floor helps monitor the scratch pattern.
CHARGING PHONE STATION WITH DUAL USB 2.0 PORTS3.15 Amps for faster charging with a shutoff when charge is
complete and new durable stainless steel cup holder.
Integrate weight system
www.klinsystem.com
FLOOR SOLUTION TECHNOLOGY
L 30L: Three heads planetary floor grinding machine fitted with 11 Kw - 15 Hp - 400 V motor. With 770mm working section is the most versatile and selling machine. Auto levelling planetary system. Heavy machine with total weight of more than 390 kg. The machine has low flange that allows for grinding and polishing under racks at 1- 4 cm. Such solution applied for its casing makes it possible to avoid manual processing during works in market stores and warehouses. Very good choice for professionals.
TECHNICAL DATA
Power
Working Width
Voltage
Weight
Amperage
Variable Speed
Tool diameter
Tool holder diameter
Application
Dust-vacuum
Water Tank capacity
Water Pump
11 Kw - 15 Hp
770mm
380-400 V - 50 Hz
390 Kg
Max 30 Amp
300 - 1300 rpm
330mm / 13”
3 x 330mm / 13”
Wet / Dry
Yes
20 Lt
Yes
L30L Productivity rates
Grinding and Polishing Concrete 7 Step
Floor Preparation 1 Step
Polishing Terrazzo 5 Step
Resin, varnish and coating removal 1 Step
Grinding and Polishing Marble 5 Step
Grinding and Polishing Granite 7 Step
25 - 30 Sqm/h
100 - 130 Sqm/h
30 - 40 Sqm/h
100 - 150 Sqm/h
20 - 30 Sqm/h
9 - 12 Sqm/h
NOTE: production rates may vary according to the surfaceconditions, diamond tools used, equipments, operator, etc.
Low-Profile Base
NEW ADJUSTABLE HANDLE BARMultiple handle positions for more convenient operation and transportation. Make sure the
handle position is locked when moving or using the machine.
EASY TO USE INTEGRATED WEIGHTSEquipped with 3-position weight adjustment system to allows to balance the weight of the machine forward or backward to increase or decrease the working pressure.
L 30L L 30L
Quick ChangeMetal Bond
VariableSpeed
WORKING WIDTH Ø 770mm
Integrate weight system
www.klinsystem.com
FLOOR SOLUTION TECHNOLOGY
L 25 RX: Three heads planetary machine fitted with 7,5 Kw - 10 Hp motor with new intelligent remote control, with total weight 557 kg. Suitable for grinding and polishing marble, terrazzo, granite and concrete floors. Also ideal for floor preparation, bush-hammering and coatings removal. Machine speed and its rotational speed can be adjusted quickly and easily using the control panel. Very good choice for professionals working on large areas. Single person is able to operate with the vacuum and the grinder problem-free. Equipped with 3-position weight adjustment system to allows to balance the weight of the machine forward or backward to increase or decrease the working pressure.
TECHNICAL DATA
Power
Working Width
Voltage
Weight
Amperage
Variable Speed
Tool diameter
Tool holder diameter
Application
Dust-vacuum
Water Tank capacity
Water Pump
7,5 Kw - 10 Hp
660mm
380-400 V - 50 Hz
557 Kg
Max 15 Amp
300 - 1300 rpm
230mm / 9”
3 x 230mm / 9”
Wet / Dry
Yes
20 Lt
Yes
L25RX Productivity rates
Grinding and Polishing Concrete 7 Step
Floor Preparation 1 Step
Polishing Terrazzo 5 Step
Resin, varnish and coating removal 1 Step
Grinding and Polishing Marble 5 Step
Grinding and Polishing Granite 7 Step
20 - 25 Sqm/h
50 - 100 Sqm/h
20 - 30 Sqm/h
80 - 120 Sqm/h
12 - 25 Sqm/h
8 - 10 Sqm/h
NOTE: production rates may vary according to the surfaceconditions, diamond tools used, equipments, operator, etc.
Quick ChangeMetal Bond
VariableSpeedL 25 RXL 25 RX REMOTE CONTROL
WORKING WIDTH Ø 660mm
NEW INTELLIGENT REMOTE CONTROLPrecise control over the machine two sensitive thumbsticks control its position and offset, including integrated mapping on the offset. A wide range of functions. Super light and easy to use with ergonomic rubber grip.
SPECIAL BATTERY SYSTEM ON BOARDThe machine is equipped with a special battery system which allows you to move the machine without problems on site without connecting the electric cable. This also simplifies the loading and unloading operations.
Integrate weight system
FLOOR SOLUTION TECHNOLOGY
www.klinsystem.com
L 25L: Three heads planetary grinding and polishing machine with 11 Kw - 15 Hp motor, designed for use in larger projects. For concrete, marble and granite grinding and polishing, coatings removal and floor preparation. Heavy and efficient, simple to use and easy to transport. Equipped with 3-position weight adjustment system to allows to balance the weight of the machine forward or backward to increase or decrease the working pressure. Very popular model for middle and large-size areas.
TECHNICAL DATA
Power
Working Width
Voltage
Weight
Amperage
Variable Speed
Tool diameter
Tool holder diameter
Application
Dust-vacuum
Water Tank capacity
Water Pump
11 Kw - 15 Hp
660mm
380-400 V - 50 Hz
355 Kg
Max 30 Amp
300 - 1300 rpm
230mm / 9”
3 x 230mm / 9”
Wet / Dry
Yes
20 Lt
Yes
L25L Productivity rates
Grinding and Polishing Concrete 7 Step
Floor Preparation 1 Step
Polishing Terrazzo 5 Step
Resin, varnish and coating removal 1 Step
Grinding and Polishing Marble 5 Step
Grinding and Polishing Granite 7 Step
20 - 25 Sqm/h
50 - 100 Sqm/h
20 - 30 Sqm/h
80 - 120 Sqm/h
12 - 25 Sqm/h
8 - 10 Sqm/h
NOTE: production rates may vary according to the surfaceconditions, diamond tools used, equipments, operator, etc.
NEW PLANETARY SYSTEMNew chain driven forced planetary system, designed to provide more durable rotation and reduce the maintenance, resulting in higher efficiency and productivity.Completely redesigned frame delivers superior maneuverability and easy tool changes.Dust-proof grinding head with low-friction chain gear planetary drive protects internal components from dust and moisture, which reduces maintenance and increases service life. The chain has been upgraded on 20”/25”/30” models.
L 25L L 25L
Quick ChangeMetal Bond
VariableSpeed
Integrate weight system
WORKING WIDTH Ø 660mm
www.klinsystem.com
FLOOR SOLUTION TECHNOLOGY
www.klinsystem.com
L 25: Three heads planetary machine for grinding and polishing. Fitted with 7,5 Kw - 10 Hp motor. Ideal for grinding and polishing marble, terrazzo, granite and concrete floors. Also suitable for floor preparation, bush-hammering and coatings removal. Powerful machine with total weight of more than 345 kg. Good choice for professionals, perfect for areas up to 1.000 m2.
TECHNICAL DATA
Power
Working Width
Voltage
Weight
Amperage
Variable Speed
Tool diameter
Tool holder diameter
Application
Dust-vacuum
Water Tank capacity
Water Pump
7,5 Kw - 10 Hp
660mm
380-400 V - 50 Hz
345 Kg
Max 15 Amp
300 - 1300 rpm
230mm / 9”
3 x 230mm / 9”
Wet / Dry
Yes
20 Lt
Yes
L25 Productivity rates
Grinding and Polishing Concrete 7 Step
Floor Preparation 1 Step
Polishing Terrazzo 5 Step
Resin, varnish and coating removal 1 Step
Grinding and Polishing Marble 5 Step
Grinding and Polishing Granite 7 Step
20 - 25 Sqm/h
50 - 100 Sqm/h
20 - 30 Sqm/h
80 - 120 Sqm/h
12 - 25 Sqm/h
8 - 10 Sqm/h
NOTE: production rates may vary according to the surfaceconditions, diamond tools used, equipments, operator, etc.
INTEGRATED LIFT POINTSNew lift points design facilitates moving
the machine with a forklift.
EASY TO USE INTEGRATED WEIGHTSEquipped with 3-position weight
adjustment system to allows to balance the weight of the machine forward
or backward to increase or decrease the working pressure.
TWO LED LIGHTS FOR MONITORING THE FLOORA detachable LED light (with a magnet)
improves visibility, and a second LED light attached in the back of the machine near
the floor helps monitor the scratch pattern.
CHARGING PHONE STATION WITH DUAL USB 2.0 PORTS
3.15 Amps for faster charging with a shutoff when charge is complete and new durable
stainless steel cup holder.
WORKING WIDTH Ø 660mm
L 25L 25
Quick ChangeMetal Bond
VariableSpeed
Integrate weight system
www.klinsystem.com
FLOOR SOLUTION TECHNOLOGY
L 20N: Three heads planetary machine suitable for grinding and polishing. Fitted with 7,5 Hp 380 V motor. Is the most performing machine of this segment. Ideal for grinding and polishing marble, terrazzo, granite and concrete floors. Also suitable for floor preparation, bush-hammering, old glues and coating/resin removal. Heavy machine with total weight of more than 265 kg. Good choice for professionals with task to cover a surface of up to 500/800 m².
Quick ChangeMetal Bond
VariableSpeed
TECHNICAL DATA
Power
Working Width
Voltage
Weight
Amperage
Variable Speed
Tool diameter
Tool holder diameter
Application
Dust-vacuum
Water Tank capacity
Water Pump
5,5 Kw - 7,5 Hp
510mm
380 V - 50 Hz
265 Kg
Max 15 Amp
300 - 1300 rpm
230mm / 9”
3 x 230mm / 9”
Wet / Dry
Yes
20 Lt
Yes
L20N Productivity rates
Grinding and Polishing Concrete 7 Step
Floor Preparation 1 Step
Polishing Terrazzo 5 Step
Resin, varnish and coating removal 1 Step
Grinding and Polishing Marble 5 Step
Grinding and Polishing Granite 7 Step
10 - 15 Sqm/h
40 - 80 Sqm/h
9 - 15 Sqm/h
40 - 60 Sqm/h
10 - 15 Sqm/h
6 - 10 Sqm/h
NOTE: production rates may vary according to the surfaceconditions, diamond tools used, equipments, operator, etc.
L 20 N Also available 1 PHASE version, 220-240 V, 5,5 Kw - 7,5 Hp, 15 Amp, working width 20”/510mm
L 20N L 20N
WORKING WIDTH Ø 510mm
NEW PLANETARY SYSTEMNew forced planetary system, designed to provide more durable rotation and reduce the maintenance, resulting in higher efficiency and productivity. Completely redesigned frame delivers superior maneuverability and easy tool changes. Dust-proof grinding head with low-friction chain gear planetary drive protects internal components from dust and moisture, which reduces maintenance and increases service life. The chain has been upgraded on 20”/25”/30” models.
EASY TO USE INTEGRATED WEIGHTSEquipped with 3-position weight adjustment system to allows to balance the weight of the machine forward or backward to increase or decrease the working pressure.
NEW ADJUSTABLE HANDLE BAR
Integrate weight system
Quick release of planetary head
for easy transport
www.klinsystem.com
FLOOR SOLUTION TECHNOLOGY
L 20: Three heads planetary machine suitable for grinding and polishing marble, terrazzo, granite and concrete floors. The machine can working in both large and narrow areas like bathrooms and kitchens. Powerful 4 Hp motor single-phase with weight of 200 kg. The machine is easy to transport, very simple and convenient to use. This model has attracted many supporters all over the world and is the most popular choice in small-size machine segment.
Quick ChangeMetal Bond
VariableSpeed
TECHNICAL DATA
Power
Working Width
Voltage
Weight
Amperage
Variable Speed
Tool diameter
Tool holder diameter
Application
Dust-vacuum
Water Tank capacity
Water Pump
3 Kw - 4 Hp
510mm
230 V - 50/60 Hz
200 Kg
Max 14 Amp
300 - 1300 rpm
230mm / 9”
3 x 230mm / 9”
Wet / Dry
Yes
20 Lt
Yes
L20 Productivity rates
Grinding and Polishing Concrete 7 Step
Floor Preparation 1 Step
Polishing Terrazzo 5 Step
Resin, varnish and coating removal 1 Step
Grinding and Polishing Marble 5 Step
Grinding and Polishing Granite 7 Step
8 - 12 Sqm/h
40 - 60 Sqm/h
10 - 15 Sqm/h
40 - 60 Sqm/h
8 - 12 Sqm/h
3 - 5 Sqm/h
NOTE: production rates may vary according to the surfaceconditions, diamond tools used, equipments, operator, etc.
NEW ADJUSTABLE HANDLE BARMultiple handle positions for more convenient operation and transportation. Make sure the handle position is locked when moving or using the machine.
IMPROVED DUST COLLECTION EFFICIENCYAdjustable skirt with a flexible brush for better dust containment. Also, the vacuum hose connection is now closer to the dust source, and utilizes a metal camlock attachment.
TWO LED LIGHTS FOR MONITORING THE FLOOR
L 20L 20
WORKING WIDTH Ø 510mmQuick release of planetary head
for easy transport
Single Phase 230 V 4 Hp
FLOOR SOLUTION TECHNOLOGY
www.klinsystem.com
L 16: Three heads planetary machine for grinding and polishing marble, granite, concrete , wooden floors, floor preparation, glue and resin removal on small areas. Ideal to work in apartments. L16 can working in both large and narrow areas like bathrooms and kitchens. Powerful 3 Hp motor single-phase can be loaded with 2 extra weights (2x10 kg). L16 is easy to handle, can be dismantled into two parts and transported even in a passenger car.
Quick ChangeMetal Bond
VariableSpeed
TECHNICAL DATA
Power
Working Width
Voltage
Weight
Amperage
Variable Speed
Tool diameter
Tool holder diameter
Application
Dust-vacuum
Water Tank capacity
Water Pump
2,2 Kw - 3 Hp
420mm
230 V - 50/60 Hz
116 Kg
Max 12 Amp
300 - 1300 rpm
178mm / 7”
3 x 178mm / 7”
Wet / Dry
Yes
20 Lt
Yes
L16 Productivity rates
Grinding and Polishing Concrete 7 Step
Floor Preparation 1 Step
Polishing Terrazzo 5 Step
Resin, varnish and coating removal 1 Step
Grinding and Polishing Marble 5 Step
Grinding and Polishing Granite 7 Step
5 - 8 Sqm/h
25 - 45 Sqm/h
5 - 8 Sqm/h
15 - 30 Sqm/h
5 - 8 Sqm/h
3 - 5 Sqm/h
NOTE: production rates may vary according to the surfaceconditions, diamond tools used, equipments, operator, etc.
L 16 Floor GrinderL 16 Floor Grinder
WORKING WIDTH Ø 420mm
QUICK CHANGE METAL BOND TOOLSQuick Change system features replaceable trapezoid-style pads that easily slide in and out of the machine plates or heads, with no bolting required. Quick Change tools are offered in separate bonds for soft, medium, hard, super hard and extra hard concrete floors.
QUICK CHANGE VELCRO PAD HOLDERfor resin tools velcro backed and floor pads
EXTRA WEIGHTS Kg 10CODE: A06.00.00.00Up to 2 additional weights.
Quick release of planetary head
for easy transport
Single Phase 230 V 3 Hp
FLOOR SOLUTION TECHNOLOGY
www.klinsystem.com
EDGER machine L 13 has special design useful for treatment of corners on large areas and grinding and polishing of joints.It as well suits grinding surfaces repaired using repair compounds. Such machine allows a contractor to carry out the work faster and is used instead of manual processing.
L13 Productivity rates
Concrete grinding 1 Step
Terrazzo grinding 1 Step
Glue removal 1 Step
Paint removal 1 Step
40 - 50 Sqm/h
60 - 90 Sqm/h
30 - 40 Sqm/h
20 - 40 Sqm/h
NOTE: production rates may vary according to the surfaceconditions, diamond tools used, equipments, operator, etc.
Additional controls available, including a forward/reverse option.
Rollers prevent the head from damaging walls, while allowing for the closest possible access to edges.
A new gauge allows the operator to control the angle of the head against the floor, up to 4 degrees in each direction, and to blend edge passes.
A level on the head allows the operator to check the flatness of the floor during work.
TECHNICAL DATA
Power
Working Width
Voltage
Weight
Amperage
Variable Speed
Tool diameter
Tool holder diameter
Application
Dust-vacuum
Water Tank capacity
Water Pump
4 Kw - 5,5 Hp
335mm
230 V - 50/60 Hz
140 Kg
Max 16 Amp
500 - 800 rpm
335mm / 13”
1 x 335mm / 13”
Dry
Yes
No
No
L 13 Edger MachineL 13 Edger Machine
Quick ChangeMetal Bond
VariableSpeed
QUICK CHANGE TOOL SYSTEM
Ø 335mmWORKING WIDTH
www.klinsystem.com
FLOOR SOLUTION TECHNOLOGY
LB 36 G PROPANE BURNISHER: First in the world three heads high-speed planetary machine. Fitted with Kawasaki 13 Kw propane motor. It can be used in closed rooms thanks to application of catalyst installed on the motor. The machine has an integrated dust container. Planetary system and soft heads enable wide use of various tools for light polishing, honing, polishing and daily cleaning of surfaces. High productivity of the machine allows works to be carried out much faster than using a standard single head or a heavy duty rotary machine. Very popular model in the U.S. Perfect for keeping large polished concrete areas clean. LB 36 G has no limitations due to cables or lack of electric power. Heavy duty transmission. No performance drop and loss of time caused by the power grid.
VariableSpeed
• Powerful Kawasaki engine• Forced planetary drive with 3x356mm heads• Optimal pad pressure + flexible head design• Superior dust collection
TECHNICAL DATA
Power
Working Width
Engine
Weight
Engine capacity
Variable Speed
Tool diameter
Tool holder diameter
Application
Dust-vacuum
Water Tank capacity
Dust collection system
13 Kw - 18 Hp
915mm
Kawasaki Propane
280 Kg
603 cc
2000 - 3000 rpm
356mm / 14”
3 x 356mm / 14”
Wet / Dry
Yes
20 Lt
Yes
LB 36G Propane High SpeedLB 36G Propane High SpeedBURNISHER
WORKING WIDTH Ø 915mm
High speed 3 heads planetary system
www.klinsystem.com
FLOOR SOLUTION TECHNOLOGY
LB 21 BURNISHER: Single head high-speed burnisher machine. Designed for sealer trowelling and for daily cleaning of large surfaces. Equipped with vacuum system and inverter for rotational direction adjustment. The heavy design of the machine ensures stability of work and high quality of the final polishing. Powerful electric machine for polishing and buffing large areas. Easy to use on jobsite, just plug the cable and start working indoor and outdoor. Superior dust collector for no dust performance.
VariableSpeed
TECHNICAL DATA
Power
Working Width
Voltage
Weight
Amperage
Variable Speed
Tool diameter
Tool holder diameter
Application
Dust-vacuum
Water Tank capacity
Dust collection system
7,5 Kw - 10 Hp
540mm
400 V - 50 Hz
146 Kg
Max 15 Amp
1000 - 2000 rpm
540mm / 21”
1 x 540mm / 21”
Wet / Dry
Yes
20 Lt
Yes
LB 21 High SpeedLB 21 High Speed BURNISHER
WORKING WIDTH Ø 540mm
INTEGRATE DUST COLLECTING SYSTEM
SHINEPRO HIGH SPEED POLISHING SYSTEM
• High stability• Powerful motor 10 Hp• Smooth control and easy to use• Superior dust collection• Durable design