Embed Size (px)
Citation preview
FloorAccessCoversThe easy way to see what’s underneath
The Worldwide Source forSpecialty Access Products
Bilco floor access covers are designed to provide convenient, direct access to underground areas. The covers are designed to accept a wide variety of floor materials allowing them to go virtually unnoticed in the surrounding floor. Covers are designed to be easily removed or operated and are available with reinforcing to satisfy nearly any loading requirement. Common applications include airports, underground railways, warehouses, hospitals, retail outlets, and general commercial interior building applications.
Features and Benefits
• Pans available in four depths: 24mm, 27mm, 50mm, 66mm, and 102mm to accept brick, concrete, tile, paviors, carpeting and more
• Models are available with reinforcing for pedestrian, 15 kN, 125 kN, 250 kN, and 400 kN loading conditions per EN 124 regulations*
• Covers are precision manufactured and feature a full EPDM seal that is capable of withstanding up to a 1000mm head of water
• Tapered cover design facilitates easy opening and secure closing and allows the covers to be virtually undetectable when installed
• Lift off models feature the Golden Key Lift-Off system. System breaks the cover seal allowing it to be easily removed from the frame
• Models are available in 2mm, cold-formed, hot-dip galvanized steel, grade 304 stainless steel, or aluminum construction
• Manufactured to meet EN 22768-1 tolerance standard for length and corner dimensions
• Products are supplied with installation instructions to ensure a trouble-free installation
• IBS-certified fire resistant and insulated access covers are available
• Available in a hinged design that includes lift assistance for applications that require regular opening with minimal effort
Bilco Floor Access Covers
Bilco’s exclusive
5 YEARWARRANTY
The Golden Key lift-off system
2 For technical assistance, see back panel for Bilco contact information
* The European standard EN 124 does not give a direct indication of the actual load in kN or tonnes. The load ratings are to be used as a guideline for product selection and are based on covers tested with full grade C34/45 concrete fill. Covers should never be subjected to the indicated test load in normal usage.
Special sizes available
Table of ContentsType Pan Depths Load Capacity Watertight Material Page
Pan Covers
BV-Shallow/BVE-Shallow 27mm Pedestrian Yes Galv Steel/Stainless 3
BV/BVE, BVS-250/BVES-250, BVS400/BVES/400
50mm125 kN, 250 kN,
400 kNYes Galv Steel/Stainless 4
BVA 66m 125 kN Yes Aluminum 5
BVH-Maxi/BVEH-Maxi, BVHS-250/BVEHS-250BVHS-400/BVEHS-400
102mm125 kN, 250 kN,
400 kNYes Galv Steel/Stainless 6
Hinged Pan Covers
BV-GD/BVE-GD, BV-GDZ, BVH-GD Maxi
50mm or 102mm
125 kN Low LevelGalv Steel/Stainless,
Galv Steel7
Fire Rated and Insulated Covers
BVF-90/BV-Thermo Steel 50mm 125 kN Low Level Galv Steel 8
Metal Plate Covers
RV/RVE, RVA
—15 kN
YesGalv Steel/Stainless
Aluminum9
Sealed Duct Covers
BVA Multi 66mm 125 kN Low Level Aluminum 10
BVA-RA 66mm 125 kN Low Level Aluminum 11
Composite Lightweight Cover
CLA, CCA, CCA-GD 24mm 15kN Low Level Aluminum 13
3For technical assistance, see back panel for Bilco contact information
Shallow Pan Covers
BV-Shallow SteelBVE-Shallow Stainless SteelPan Depth: 27mmLoad Capacity: Pedestrian Use
Cover reinforced for pedestrian loading conditions
Type BV-Shallow • BVE-Shallow Pan Depth: 27mmMaterial: Galvanized Steel or Stainless Steel
Standard Sizes
To determine outside dimensions add 130mm to dimensions outlined above.
1. Frame2. Cover3. Seal4. Reinforcement5. Allen Screw6. Plastic Cap7. Anchor8. Reinforcement
4 For technical assistance, see back panel for Bilco contact information
Clear Dimensionsof shaft (mm) c x d
Pedestrian Use
Galvanized Steel
Stainless Steel Grade 304, Passivated
200 X 200 BV-Shallow 22 X
300 x 300 BV-Shallow 33 BVE-Shallow 33
400 X 400 BV-Shallow 44 BVE Shallow 44
500 x 500 BV-Shallow 55 BVE -Shallow 55
600 x 400 BV-Shallow 64 BVE -Shallow 64
600 x 600 BV-Shallow 66 BVE -Shallow 66
800 x 600 BV-Shallow 86 BVE -Shallow 86
800 x 800 BV-Shallow 88 BVE -Shallow 88
1000 x 600 BV-Shallow 106 BVE -Shallow 106
5
Standard Pan Covers
BV SteelBVE Stainless SteelPan Depth: 50mmLoad Capacity: 125 kN Test Load EN 124
BVS-250 SteelBVES-250 Stainless SteelPan Depth: 50mmLoad Capacity: 250 kN Test Load EN 124
BVS-400 SteelBVES-400 Stainless SteelPan Depth: 50mmLoad Capacity: 400 kN Test Load EN 124
Clear Dimensions of shaft (mm) c x d
Type
125 kN Test Load 250 kN Test Load 400 kN Test Load
300 x 300 BV 33, BVE 33 X X
400 x 400 BV 44, BVE 44 BVS-250/44, BVES-250/44 X
450 x 450 BV 45 X X
500 x 500 BV 55, BVE 55 BVS-250/55, BVES-250/55 BVS-400/55, BVES-400/55
600 x 400 BV 64, BVE 64 BVS-250/64, BVES-250/64 BVS-400/64, BVES-400/64
600 x 600 BV 66, BVE 66 BVS-250/66, BVES-250/66 BVS-400/66, BVES-400/66
635 x 635 BV 635 X X
800 x 600 BV 86, BVE 86 X X
800 x 800 BV 88, BVE 88 BVS-250/88, BVES-250/88 BVS-400/88, BVES-400/88
1000 x 600 BV 106, BVE 106 BVS-250/106, BVES-250/106 BVS-400/106, BVES-400/106
1000 x 800 BV 108, BVE 108 X X
1000 x 1000 BV 110, BVE 110 BVS-250/110, BVES-250/110 BVS-400/110, BVES-400/110
Standard Sizes
To determine outside dimensions add 135mm to dimensions outlined above.
1. Frame2. Cover3. Seal4. Reinforcement5. Allen Screw6. Plastic Cap7. Anchor
Type BV • BVS-250 • BVS-400 Pan Depth: 50mmMaterial: Galvanized Steel or Stainless Steel
For technical assistance, see back panel for Bilco contact information
BVA AluminumPan Depth: 66mmLoad Capacity: 125 kN Test Load EN 124
Filled with granite finish
Partially filled with tiles
Standard Pan Covers
Clear Dimensions of shaft (mm) c x d
125 kN Test Load
200 x 200 BVA 22
300 x 300 BVA 33
400 x 400 BVA 44
450 x 450 BVA 45
500 x 500 BVA 50
600 x 400 BVA 64
600 x 600 BVA 66
635 x 635 BVA 635
700 x 700 BVA 77
800 x 600 BVA 86
800 x 800 BVA 88
1000 x 600 BVA 106
1000 x 800 BVA 108
1000 x 1000 BVA 110
Standard Sizes
To determine outside dimensions add 120mm to dimensions outlined above.
1. Frame2. Cover 3. Seal4. Reinforcement Screw5. Allen Screw 6. Plastic Cap 7. Base Plate8. Die Cast Corner9. Square Boss
Type BVA Pan Depth: 66mmMaterial: Aluminum
6 For technical assistance, see back panel for Bilco contact information
7For technical assistance, see back panel for Bilco contact information
BVH-Maxi SteelBVEH-Maxi Stainless SteelPan Depth: 102mmLoad Capacity: 125 kN Test Load EN 124*
BVHS-250 SteelBVEHS-250 Stainless SteelPan Depth: 102mmLoad Capacity: 250 kN Test Load EN 124*
BVHS-400 SteelBVEHS-400 Stainless SteelPan Depth: 102mmLoad Capacity: 400 kN Test Load EN 124*
Deep Pan Covers
Clear Dimensions of shaft (mm) c x d
Type
125 kN Test Load 250 kN Test Load 250 kN Test Load
400 x 400BVH maxi 44, BVEH maxi 44
BVHS-250/44, BVEHS-250/44
BVHS-400/44, BVEHS-400/44
500 x 500BVH maxi 55, BVEH maxi 55
BVHS-250/55, BVEHS-250/55
BVHS-400/55, BVEHS-400/55
600 x 400 XBVHS-250/64, BVEHS-250/64
BVHS-400/64, BVEHS-400/64
600 x 600BVH maxi 66, BVEH maxi 66
BVHS-250/66, BVEHS-250/66
BVHS-400/66, BVEHS-400/66
800 x 600BVH maxi 86, BVEH maxi 86
BVHS-250/86, BVEHS-250/86
BVHS-400/86, BVEHS-400/86
800 x 800BVH maxi 88, BVEH maxi 88
BVHS-250/88, BVEHS-250/88
BVHS-400/88, BVEHS-400/88
1000 x 600BVH maxi 106, BVEH maxi 106
BVHS-250/106, BVEHS-250/106
BVHS-400/106, BVEHS-400/106
1000 x 1000BVH maxi 110, BVEH maxi 110
BVHS-250/110, BVEHS-250/110
BVHS-400/110, BVEHS-400/110
Standard Sizes
To determine outside dimensions of the BVHS-250 and BVH Maxi add 132mm to dimensions outlined above. To determine outside dimensions of the BVHS-400 add 232mm to dimensions outlined above.
* When filled with a minimum 50mm layer of grade C35/45 concrete (EN 206)
1. Frame2. Cover3. Seal4. Reinforcement5. Allen Screw6. Plastic Cap7. Anchor
Type BVH-Maxi • BVHS-250 • BVEHS-400 Pan Depth: 102mm Material: Galvanized Steel or Stainless Steel
BV-GD SteelBVE-GD Stainless SteelLockable CoverPan Depth: 50mmLoad Capacity: 125 kN Test Load EN 124
BV-GDZ SteelLockable Cover With Interior OperationPan Depth: 50mmLoad Capacity: 125 kN Test Load EN 124
BVH-GD Maxi SteelPan Depth: 102mmLoad Capacity: 125 kN Test Load EN 124*
BV-GD MaxiDouble Piston
Hinged Pan Covers with Lift Assist
Type BV-GD • BV-GDZ • BVH-GD Maxi Pan Depth: 50mm or 102mm Material: Galvanized Steel or Stainless Steel
Clear Dimensions of shaft (mm) c x d
Type 125 kN Test Load
500 x 500 BVH-GD 55
600 x 600BV-GD 66, BVE-GD66,
BV-GDZ 66, BVH-GD Maxi 66
800 x 600BV-GD86, BVE-GD86,
BV-GDZ 86, BVH-GD 86
800 x 800BV-GD 88, BVE-GD 88, BV-GDZ 88, BVH-GD 88
1000 x 600BV-GD 106, BVE-GD 106, BV-GDZ 106, BVH-GD 106
1000 x 1000BV-GD 110, BVE-GD 110, BV-GDZ 110, BVH-GD 110
Standard Sizes
To determine outside dimensions of BV-GD, BVE-GD, BV-GDZ and BVH-GD Maxi models consult Bilco.
* When filled with a minimum 50mm layer of grade C35/45 concrete (EN 206)
8 For technical assistance, see back panel for Bilco contact information
* When filled with a minimum 50mm layer of grade C35/45 concrete (EN 206)
9For technical assistance, see back panel for Bilco contact information
BV-F90 Fire ResistantPan Depth: 50mmLoad Capacity: 125 kN Test Load EN 124Fire Test Certificate: Resists fire for 90 minutes following a live fire-test by the Institute for Fire Protection Technology and Safety Research (IBS)
BV-Thermo InsulatedPan Depth: 50mmLoad Capacity: 125 kN Test Load EN 124Thermal Properties: Resistance = 3.2 m2 K/W, Coefficient = 0.3 W/m2 K (=RC Warde)
Fire Rated and Insulated Covers
BV-F90 Fire Resistant Steel BV Thermo Steel
Clear Dimensions of shaft (mm) c x d
Type 125 kN Test Load
300 x 300 BV-F90 33
450 x 450 BV-F9045
500 x 500 BV-Thermo 55, BV-F90 55
600 x 400 BV-F90 64
600 x 600 BV-Thermo 66, BV-F90 66
635 x 635 BV-F90 635
800 x 600 BV-Thermo 86, BV-F90 86
800 x 800 BV-Thermo 88, BV-F90 88
1000 x 600 BV-Thermo 106, BV-F90 106
1000 x 800 BV-F90 108
1000 x 1000 BV-Thermo 110, BV-F90 110
Standard Sizes
1. Frame2. Cover3. Seal (Fire Resistant)4. Reinforcement5. Allen Screw
6. Plastic Cap 7. Anchor 8. Fire-Protection Panel 9. Lifting Handle10. Stainless Steel Z-Bracket
1. Frame2. Cover3. Seal4. Reinforcement5. Allen Screw
6. Plastic Cap 7. Anchor 8. Insulation Plate in Z-Bracket 9. Lifting Handle for Insulation Plate10. Alu Z-Bracket
To determine outside dimensions of models add 135mm to above outlined dimensions.
Grab handle for removing the fire protection panel on the BV-F90
Type BV-F90 • BV-Thermo Pan Depth: 50mm Material: Galvanized Steel
RV SteelRVE Stainless SteelLoad Capacity: 15 kN Test Load EN 124
RVA AluminumLoad Capacity: 15 kN Test Load EN 124
Metal Plate Access Covers
Clear Dimensions of shaft (mm) c x d
Type 15 kN Test Load
200 x 200 RVA 22
300 x 300 RVE 33, RVA 33
400 x 400 RVE 44, RVA 44
500 x 500 RVE 55, RVA 55
600 x 400 RV 64, RVE 64, RVA 64
600 x 600 RV 66, RVE 66, RVA 66
800 x 600 RV 86, RVE 86, RVA 86
800 x 800 RV 88, RVE 88, RVA 88
1000 x 600 RVE 106, RVA 106
1000 x 1000 RVE 110, RVA 110
Standard Sizes
RV Steel
RVA Aluminum
To determine outside dimensions of the RV models add 105mm to dimensions outlined above.
To determine outside dimensions of the RVE models add 80mm to dimensions outlined above.
1. Frame2. Plate3. Seal4. Allen Screw5. Anchor6. Socket7. Plastic Cap
1. Frame2. Cover3. Seal4. Allen Screw5. Plastic Cap6. Cover Reinforcement
Type RV • RVE • RVA Cover: Metal plate cover with slip resistant surfaceMaterial: Galvanized Steel, Stainless Steel, and Aluminum
10 For technical assistance, see back panel for Bilco contact information
11For technical assistance, see back panel for Bilco contact information
BVA Multi AluminumPan Depth: 66mmLoad Capacity: 125 kN Test Load EN 124
Sealed Duct Covers
Clear Dimensions of shaft (mm) c x d
Type 125 kN Test Load
600 x 1320 BVA Multi 2-Part
600 x 2030 BVA Multi 3-Part
800 x 1720 BVA Multi 2-Part
800 x 2630 BVA Multi 3-Part
Standard Sizes
To determine outside dimensions add 120mm to dimensions outlined above.
1. Frame 2. Cover 3. Seal 4. Reinforcement 5. Allen Screw 6. Plastic Cap 7. Base Plate 8. Die Cast Corner 9. Square Boss 10. Cross-Beam 11. Seal for Cross-Beam 12. Location Pin
Type BVA MultiPan Depth: 66 mm Material: AluminumDescription: Provides a larger opening for pipe and cable runs where continuous access is required. Available in two- or three-part assemblies that feature demountable crossbeams that can be removed without tools.
Cross Beam - can be fitted and removed without tools
Connection of cover assemblies
Filled with tiles - continuous run of covers through length of corridor
BVA-RA AluminumPan Depth: 66mmLoad Capacity: 125 kN Test Load EN 124
Sealed Duct Covers
Type BVA-RAPan Depth: 66 mm Material: AluminumDescription: Designed to meet virtually any access opening requirement. Covers can be joined to create endless opening sizes and configurations. Maximum width is 1000mm.
1. Frame 2. Cover 3. Seal 4. Reinforcement 5. Allen Screw 6. Plastic Cap 7. Base Plate 8. Die Cast Corner 9. Square Boss 10. Cross-Beam 11. Seal for Cross-Beam 12. Location Pin
12 For technical assistance, see back panel for Bilco contact information
13For technical assistance, see back panel for Bilco contact information
Composite Lightweight Covers
Floor finish to be installed on site
Tile adhesive applied on site (e.g. Mapei Keralastic)
Aluminum covering plate(with white coating)
Honeycomb core (featherweight)
Adhesive layer
High-strength bonding
Aluminum cover frame
Stainless steel screw connections
EPDM seal
Aluminum frame profile
Up to 70% lighter than concrete-filled!
New lightweight Access Covers!
Much easier to lift and InstallFeatures and Benefits
• Patented design utilizes composite aluminum honeycomb plates and adhesive technology used in the aircraft industry
• Lightweight-construction access cover has significant weight-savings when compared to concrete-filled access covers
• Concrete fill is not required as floor coverings (tiles, slabs, parquet) can be bonded directly to cover
• Significantly reduces installation time as there is no need to wait for concrete to dry
CLA AluminumPan Depth: 24mm Load Capacity: 15kN Test Load EN124
Composite Lightweight Covers
Standard Sizes
Type CLA composite light aluminum
To determine outside dimensions add 120mm to dimensions outlined above
1. Frame2. Cover3. Seal4. Allen screw (stainless steel)5. Plastic cap6. Aluminum-honeycomb plate (with white coating)7. Injection-molded part (plastic)8. Square boss (stainless steel)9. Die-cast corner (aluminum)
Type CLAPan Depth: 24mm Material: AluminumDescription: Lightweight access covers are much easier to lift and install compared to a concrete-filled access covers.
14 For technical assistance, see back panel for Bilco contact information
Clear Dimensionsof shaft (mm) c x d
15 kN Test Load
Weight withoutfloor finish (kg)
200 x 200 CLA 22 3
300 x 300 CLA 33 5
400 x 400 CLA 44 7
500 x 500 CLA 55 9
600 x 400 CLA 64 9
600 x 600 CLA 66 10
800 x 600 CLA 86 12
800 x 800 CLA 88 15
1000 x 600 CLA 106 15
15For technical assistance, see back panel for Bilco contact information
Composite Lightweight Hinged CoversType CCA • CCA-GDPan Depth: 24mm Material: AluminumDescription: Lightweight access covers are much easier to lift and install compared to a concrete-filled access covers
CCA Hinged Pan Depth: 24mm Load Capacity: 15kN Test Load EN124
CCA-GD Hinged with Lift AssistPan Depth: 24mm Load Capacity: 15kN Test Load EN124
1. Frame2. Cover 3. Seal4. Allen Screw (stainless steel)5. Die-cast corner (aluminum)6. Plastic cap7. Hinge8. Injection-molded part (plastic)9. Square boss (stainless steel)
10. Safety device11. Aluminum honeycomb plate
(with white coating)12. Gas-lift struts
(Type CCA-GD only)
The cover is lifted by the hinge, significantly reducing the effort required
Standard Sizes
To determine outside dimensions add 142mm to dimensions outlined above
Clear Dimensionsof shaft (mm) c x d
Hinged Cover Hinged Cover with Lift Assist
15 kN Test Load
Weight withoutfloor finish (kg)
15 kNTest Load
Weight withoutfloor finish (kg)
500 x 500 CCA 55 10 X X
600 x 400 CCA 64 10 X X
600 x 600 CCA 66 12 CCA-GD 66 13
800 x 600 CCA 86 14 CCA-GD 86 15
800 x 800 CCA 88 17 CCA-GD 88 18
1000 x 600 CCA 106 17 CCA-GD 106 18
Copyright 2012 The Bilco Company. All rights reserved. Printed in the U.S.A. CATH-I12.1
The Worldwide Source for Specialty Access Products
The Bilco Company has an international network of regional offices and distributors. Contact one of our regional sales offices to learn more about Bilco access products
or visit www.bilco.com to find your nearest Bilco product distributor.
Asia & The Pacific The Bilco Far East Co., Ltd.Admiralty, Hong KongTel: 852 2530 8862Fax: 852 2530 8863E-mail: [email protected]
CanadaBilco CanadaLondon, OntarioTel: (519) 659-7331Fax: (519) 455-8593E-mail: [email protected]
Central America & CaribbeanThe Bilco CompanyNew Haven, CT U.S.A.Tel: (203) 934-6363Fax: (203) 933-8478E-mail: [email protected]
Europe & UKBilco UK Ltd.Bury St. EdmundsSuffolk, United KingdomTel: 01284 701696Fax: 01284 702531 E-mail: [email protected]
Mexico BilcoMexTel: 1 (800) 366-6530 X-3302Fax: 1 (575) 589-6666E-mail: [email protected]
Middle East & AfricaThe Bilco CompanyNew Haven, CT U.S.A.Tel: (203) 934-6363Fax: (203) 933-8478E-mail: [email protected]
South AmericaThe Bilco CompanyNew Haven, CT U.S.A.Tel: (203) 934-6363Fax: (203) 933-8478E-mail: [email protected]
The Bilco Company – Corporate HeadquartersP.O. Box 1203 • New Haven, CT 06505(203) 934-6363 • Fax (203) 933-8478 • www.bilco.com • e-mail: [email protected]
![[XLS] · Web view450. 90. 450. 900. 900. 225. 450. 450. 900. 450. 225. 270. 4.5. 450. 450. 450. 450. 450. 450. 450. 450. 450. 900. 450. 450. 450. 112.5. 900. 900. 450. 112.5. 450](https://img.dokumen.tips/doc/110x75/5b3c17127f8b9a213f8d0b42/xls-web-view450-90-450-900-900-225-450-450-900-450-225-270-45.jpg)
![Dopl Hující pr ozkumy a rozbory - Smolné Pecesmolnepece.unas.cz/files/vykres_zameru_smolne_pece.pdfSV BV SV BV BV BV BV OM BV BV BV PV DS [BV] [PV] [BV] [OX1] [BV] NT NT BV DS NSi](https://img.dokumen.tips/doc/110x75/5ecbc6e1aab05a781359c472/dopl-hujc-pr-ozkumy-a-rozbory-smoln-sv-bv-sv-bv-bv-bv-bv-om-bv-bv-bv-pv.jpg)
