8
FLEXOTOP Safety Surfacing Solutions

Flexotop - KOMPANflexotop.kompan.com/media/704/Kompan_Wetpour_brochure_2013_A4… · The top layer consists of EPDM gran-ulates, made for purpose or recycled. Best value in the long

Embed Size (px)

Citation preview

Flexotop™

Safety Surfacing Solutions

KOMPAN is the world market leader within playground solutions for chil-dren of all ages. We have over 40 years experience in developing solutions that are designed to improve children’s health and learning. But it is not enough to build the most fantastic and child developing playgrounds in the world. We have also taken the whole area into consideration. That is why we take great pride in our FLEXOTOP™ wetpour products. Through the years KOMPAN has designed wetpour solutions all over the world.

the world market leader

Falling over is all part of playing. A poured rubber surface is without any doubt the best impact sur-face. Unlike bark woodchip or sand, you never find hazardous or unpleasant objects beneath the surface.

FLEXOTOP™ is hard-wearing surface, and it does not have any joins or seams in which waste can collect and it’s a good drainage ensures a fast-drying surface.

FLEXOTOP™ is shock-absorbent and reduces the risk of serious injuries, while at the same time being comfortable to walk on. This kind of surfac-ing also makes the playground more accessible to children and adults with disabilities.

Safe play for everyone

Vietnam

Children relate to the world through play. To children, play and learning go hand in hand. Good playgrounds are fantastic places for children’s physical, social and cognitive development and with FLEXOTOP™ you also get the possibility to strengthen learning through play. That’s why our designs are so much more than fun. They are made to ad-dress age appropriate play and learning.

learning as the foundation

Put an individual stamp on your playground. With 18 bold colours, the only limit to creativity is your imagination. With FLEXOTOP™ you can use patterns, 3D effects and designs to make a playground a work of art, one where children can make up their own new games.

let your imagination run wild!

France

MaterialsFLEXOTOP™ is made up of two layers of in situ cast rubber that are laid one after the other. The bottom layer is the base that provides the shock-absorbent effect. The thick-ness of this layer therefore has to be adapted to the critical fall height in the playground. The top layer is at approx. 15 mm thick and it protects the shock-absorbent base from wear and tear. This is where you can use different colours and create plenty of graphic features.

Flexotop™

Bottom layerThe base consists of 100% recycled rubber, mainly from recycled tyres. All tyres are thoroughly cleaned to remove any brake residue or other contaminants before they are processed. The processed material is then sorted, using magnets to ensure that there are no remaining metal fragments.

Top layerThe top layer consists of EPDM gran-ulates, made for purpose or recycled.

Best value in the long termLong-lasting, no topping up and practically maintenance-free.

A safe solutionFLEXOTOP™ has been tested and approved in accordance with EN1177. We offer optional HIC testing with every installation.

Wide range of applicationsFLEXOTOP™ is intended for use in play and activity environments, but it also has many other poten-tial applications, e.g. paths, parks and other recreational areas.

the benefits of Flexotop™

France

Adapted fall-protection means safer play

23

567890

xx m

Used on surfaces wherethere are fall heights.

15 mm EDPM Top Layer

Bottom layer/base – varies in thickness depending on fall height

Packed stone material

A well-draining base layersuch as asphalt and concrete

20 mm EDPM Top Layer

Used on surfaces wherethere are no fall heights.

the surfacing has to be adapted to the fall height of the product.

Flexotop™ - All Around the World

Spain

USA

Flexotop™ colour chart – rubber surfaces installed on-site

5794 BLACK A4 HRBlack

5829 A4 HRGreen

5834 LIGHT A4 HRLight grey

NB: The RAL code quoted is the RAL code closest to the colour of the granulates.

the possible effect of UVThe wetpour surface may perhaps be affected by the UV light from the sun.One effect may under certain conditions be a yellowing of the binding agent used, which in particularly can change the appearance of bright colors. How-ever, this can be avoided by selecting our aliphatic binder.The rubber granulates are as such color stable but will, depending on the color, fade slightly over time.

5809 A4 HRBlue

5741 A4 HREggshell

5782 A4 HRBeige

5786 A4 HRDusty red

5765 A4 HRBright orange

5778 A4 HRPink

5804 A4 HRPurple

5794 A4 HRDark grey

5815 A4 HRLight blue

5747 A4 HREarth yellow

5769 A4 HRBright yellow

5774 A4 HRBright red

5820 A4 HRTeal

5790 A4 HRBrown

5799 A4 HRAgua Blend

5834 A4 HRMid grey

5753 A4 HRTierra Blend

5824 A4 HRLight green

5759 A4 HRFuego Blend

Flexotop™ - All Around the World

UK

KOMPAN IrlandCorofin,Tuam,GalwayTel: 093 41100Fax: 093 41102

ba c d e f g h j k l o p qnm