Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
F L A S H W AV E® C D SPACKET OPTICAL NETWORKING PLATfORm
2
In a changing communications world, service providers are enhancing the capacity and efficiency of their access networks. They must meet demand for new packet-based services and maintain guaranteed service delivery. As Ethernet becomes more prevalent, the networks must evolve to deliver it efficiently and cost-effectively. Fujitsu has developed the next generation of packet optical networking platforms specifically to meet these emerging challenges and smooth the transition to connection-oriented Ethernet services.
A Whole New Class of Optical Edge System
The FLASHWAVE® CDS (Compact Density System) enables service providers to deliver business Ethernet and legacy services over their existing network infrastructure. In the competitive telecommunications industry, service providers cannot afford the cost of deploying and operating networks specifically for different services. By consolidating support for multiple service types onto a single network infrastructure, the FLASHWAVE CDS reduces costs for both network equipment and ongoing operation.
Compact and modular, the FLASHWAVE CDS supports a wide array of Ethernet and SONET/SDH interfaces. It incorporates advanced rate shaping and traffic management and aggregation, to provide guaranteed connection-oriented Ethernet delivery, while supporting existing revenue-bearing services. The FLASHWAVE CDS delivers both:
▶ Agile packet edge services, traditionally found only in high-end, feature-rich access service elements
▶ Efficient multiservice support for packet-based Ethernet as well as traditional SONET/SDH
Carrier-Grade Quality
For more than 20 years, Fujitsu has built dependable, scalable optical networks for customers of all types and sizes. Fujitsu has set the standard for performance, reliability and carrier-grade quality. The FLASHWAVE CDS is designed to be deployed by local and national carriers, cable companies, wireless service providers, public utilites and government agencies.
AGILITY fOR CHANGING NETWORKS
LOCALCARRIERS
MULTIPLESYSTEM OPERATOR
UTILITY COMPANIES WIRELESS SERVICEPROVIDERS
GOVERNMENTCABLEPROVIDERS
NATIONALCARRIERS
3
The FLASHWAVE CDS consists of a common two-slot chassis and a range of interface units to meet a variety of business applications, traffic capacity requirements and price points. Service providers can leverage its modular architecture to enhance their business services and optimize their access network. This innovative platform smoothes the transition to a packet-centric network architecture by enabling next-generation Ethernet services while preserving the integrity of legacy services.
Key Technical Advantages
▶ Two-slot modular design
▶ High-density Ethernet interfaces
▶ Connection-oriented Ethernet transport
▶ Advanced traffic prioritization and traffic management
▶ Robust Ethernet link and service OAM
▶ Protected Ethernet delivery with link aggregation
▶ Diverse interface options for Ethernet and SONET/SDH services
▶ Mix-and-match packet and legacy services
Key Network Benefits
▶ Consolidates multiple access boxes into a single edge platform
▶ Delivers high-bandwidth Ethernet services
▶ Delivers guaranteed QoS and SLAs
▶ Reduces equipment space requirements
▶ Leverages and extends existing optical network
▶ Transitions to Ethernet and packet-based services
▶ Maintains support for existing services
▶ Lowers operational costs
EffICIENT, mODULAR, HIGH-VALUE
THE WINNINGCOMBINATION
KEY NETWORKBENEFITS
REDUCECAPEX/OPEX
PACKET EDGESERVICES
PRESERVELEGACY NETWORKS
EXPANDCURRENT SERVICESSONET/TDM
SUPPORT
SPACE SAVINGS
CONSOLIDATEMULTIPLE BOXES
MODULAR DESIGNFOR FLEXIBLE SERVICES
MAINTAIN EXISTINGREVENUE SERVICES
HIGH BANDWIDTHGUARANTEED QoS/SLA
4
The FLASHWAVE CDS provides modular, efficient service delivery and aggregation for business access services. The platform can be used to provide high-capacity services from a Central Office (CO), directly at customer premises (CPE), in outside-plant cabinets for business park and cell site applications or on multiple floors of multitenant office buildings.
From a serving CO or CPE location, 1 Gigabit Ethernet, 10 Gigabit Ethernet, or OC-48 network interfaces allow connections into larger metropolitan networks. The FLASHWAVE CDS is ideally suited for deployments with both the FLASHWAVE 7500 ROADM and the FLASHWAVE 9500 Packet Optical Networking Platform (Packet ONP).
The Next-Generation Edge Network
FLASHWAVE7 5 0 0
FLASHWAVE7 5 0 0
FLASHWAVE7 5 0 0
FLASHWAVE7 5 0 0
FLASHWAVE9 5 0 0
FLASHWAVE9 5 0 0
FLASHWAVE9 5 0 0
FLASHWAVE9 5 0 0
GE, 10 GEor G.709
dual-homedOC-48
GE, 10 GEor G.709
LinkAggregation
GE, 10 GEor G.709
GE or 10 GERing
Fast EthernetGigabit Ethernet
TDM
Fast EthernetGigabit Ethernet
TDM
Gigabit EthernetOC-3
OC-12Eth
ern
et &
TD
M
FE o
r GE
Lin
k A
gg
reg
atio
n
Lin
k A
gg
reg
atio
nMetro Network
FLASHWAVEC D S
FLASHWAVEC D S
FLASHWAVEC D S
FLASHWAVEC D S
FLASHWAVEC D S
FLASHWAVEC D S
FLASHWAVEC D S
Modular Scalability, Wide Array of Interface Options
Access networks are characterized by the need to support a wide array of services over a variety of access technologies. Traditionally, service providers resorted to multiple overlay networks to meet all of the varying service requirements, resulting in costly, inefficient edge networks.
With a competitive industry environment and increasing bandwidth requirements, the traditional approach simply isn’t sustainable from a business or operational perspective. The FLASHWAVE CDS effectively supports the wide range of services and applications found in access networks. Its unique hardware and software architecture integrates Ethernet and SONET/SDH technology in a compact, cost-effective platform.
THE PACKET EDGE ARCHITECTURE
5
Enterprise Ethernet Services
The FLASHWAVE CDS is the ideal access and aggregation solution for delivering Ethernet business services. High-density Ethernet service interface cards allow large numbers of data customers to be supported in a single system. Integrated traffic management, data aggregation, and connection-oriented Ethernet transport technologies provide robust, carrier-grade data services with guaranteed Service Level Agreements (SLA).
Legacy Services Demarcation
Legacy SONET/EoS services remain the primary revenue producers for most service providers. Today, these services are usually terminated at customer sites by deploying a full SONET platform. With the FLASHWAVE CDS, a single service module provides both service delivery and service demarcation. The platform’s small size, low power consumption and cost-to-value ratio all offer compelling benefits when compared to terminating these services on a traditional ADM.
Wireless Backhaul
The FLASHWAVE CDS eases migration from TDM to Ethernet transport for next-generation WiMAX and 4G LTE base stations. These systems require high-bandwidth, native Ethernet transport services—the perfect application for the FLASHWAVE CDS optical edge platform.
Next-Generation Transition
The FLASHWAVE CDS provides an advanced Ethernet service and aggregation architecture for access networks. The incorporation of SONET/SDH, and Ethernet enables a smooth, seamless transition to a packet-centric architecture.
CRITICAL NETWORK APPLICATIONS
DELIVER TO SMALL AND LARGE ENTERPRISES
MULTITENANTUNIT
CUSTOMERPREMISES
OUTDOORCABINET
EFFICENTLY DEMARC CURRENT SERVICES
TRANSITION FOR WIRELESS BACKHAUL
AGGREGATION FOR ACCESS NETWORKS
Low Power Consumptionand a Small Footprint
6
NETWORK LIfE CYCLE SERVICESFujitsu offers a broad selection of professional services for every stage in a network’s evolution and operation. From planning through deployment and ongoing maintenance to future enhancements, Fujitsu Network Life Cycle Services are available whenever needed. Fujitsu sales representatives can guide service providers in selecting options that address individual business needs.
Popular planning and deployment services for the FLASHWAVE CDS include:
▶ Custom Cabinet Solutions – Turnkey inside wall-mount and outside-plant solutions, including standard and custom configurations for wireline, wireless, FTTx, cable and MSO customers
▶ Furnish Material – Identification and ordering of the material needed to install network equipment such as electrical and fiber cable solutions, minor materials and third-party ancillary equipment
▶ Turn-Up and Test – From on-site configuration and simple turn-up to rigorous, long-term testing
Service Support Packages for Ongoing Maintenance
For a complete professional maintenance solution, Fujitsu service support packages have the right combination of flexibility and comprehensive assurance. Choose the level and types of service you need to supplement your own resources. Our service support packages help keep your network running smoothly, provide critical care and protect the longevity of your investment.
Network Operations Center (NOC)
With a full range of vendor-independent network fault and performance monitoring features, the Fujitsu NOC offers guaranteed, round-the-clock system protection. Our reliable NOC facility is available as a primary or supplemental operations resource. This service not only helps you control costs and maintain high levels of customer satisfaction, it also provides trustworthy and reliable after-hours and emergency coverage.
7
fEATURES AND SPECIfICATIONSSystem Overview
▶ 2-slot, 2RU, modular chassis
▶ Universal slots support any interface units
Available Interfaces
LDP1 Standard GE Data Unit
12 x Gigabit Ethernet (SFP) or mixed with 12 x 10/100/1000Base-T (RJ45)
LDP3 SONET Unit
2 x OC-48 WAN 2 x Gigabit Ethernet/OC-3/OC-12
HDP1 Standard 10GE Data Unit
2 x 10 Gigabit Ethernet (XFP) 12 x Gigabit Ethernet (SFP) 12 x 10/100/100Base-T (RJ45)
Ethernet Functions
▶ EPL and EVPL Services
▶ VLAN push, pop, translation
▶ Connection admission control
▶ 802.3ad Ethernet link aggregation •1+1 •0:N
▶ Jumbo frame support
▶ Advanced traffic classification •Port •VLAN •Ethernet priority bit (802.1p) • IP DSCP
▶ Strict priority & per-EVC queuing
▶ Hierarchical shaping with logical ports
▶ 802.3ah link EFM OAM
▶ In-band VLAN management
SONET/SDH Functions
▶ STS/STM cross connects
▶ TDM multiplexing
▶ Ethernet over SONET•GFP-F encapsulation•HO VCAT
▶ SDCC support for remote access
Operating Environment
▶ Operations temperature range –40 to +65 °C (–40 to +149 °F)
▶ Humidity range 5 to 95%
Maximum Power Consumption (Heat Dissipation)
▶ Maximum power per system 212 W (723 BTU/hr)
▶ Power Input –48 VDC 110 VAC (via 1RU rectifier)
Physical Characteristics
▶ Dimensions (H x W x D) 3 x 17.4 x 8.9" (76 x 442 x 226 mm) 2RU high, 19/23" rack-mountable
▶ Weight 10.2 lb/22 kg
Operations
▶ TL1 protocol over OSI/Ethernet
▶ NETSMART® 500 Element Management System (EMS)
▶ NETSMART 1500 Network Management System (NMS)
▶ Software download and remote memory backup/restore
▶ Interoperable with FLASHWAVE 7500 ROADM and
▶ FLASHWAVE 9500 Packet ONP platforms
▶ Telcordia™ OSMINE compliant
Environmental Compliance
▶ UL-certified
▶ NEBS Level 3 compliant
FLASHWAVE CDS
Fujitsu Network Communications Inc.
2801 Telecom Parkway, Richardson, TX 75082
Tel: 800.777.FAST (3278) Fax: 972.479.6900
us.fujitsu.com/telecom
© Copyright 2009 Fujitsu Network Communications Inc.FLASHWAVE® and NETSMART® are trademarks of Fujitsu Network Communications Inc. (USA).
FUJITSU (and design)® and THE POSSIBILITIES ARE INFINITE™ are trademarks of Fujitsu Limited. All Rights Reserved.All other trademarks are the property of their respective owners.
Configuration requirements for certain uses are described in the product documentation. Features and specifications subject to change without notice.
7.0/R3.3/09.09