Product Description

ERG.FA.CTLG.0002.16

EGS Business Park B2 Kat: 11 No: 348 34149 Bakırköy, Istanbul/TURKEY E-Mail: sales@ergil.comPhone: +90 212 485 40 07 (Pbx) Fax: +90 212 485 40 42

Storage Tank Protection Equipment

ERGIL Storagetech™ Model Number 300 Flame Arrester is a safety device that has a flame barrier with a large

number of defined passage gaps, whose gap cross section is set withregard to the properties of the �owing gas, is

cooled e�ectively and secured against a �ame �ashback in the case of continuous combustion. They are typically

mounted to a flange or pipe. which connects the vapor space of a storagetank or a pipeline.

ERGIL Storagetech™ Model 300 Vertical In-line De�agation Flame Arrester is intended for pipeline installation close

to the source of any potential ignition source by minimising �ame speed and the development of an explosive pres-

sure.

The �ame quenching element is designed to be three or four times the area of the pipe in which it is installed, and

is assembled between two �anged reducing spools. The element comprises a tightly rolled scroll or scrolls of

crimped stainless steel ribbon to form passages through which the vapour passes. The area of each passage deter-

mines level of protection that the element provides. ERGIL Storagetech™ Model 300 In-line De�agration Flame

Arrester has a Maximum Experimental Safe Gap as per standard, and is suitable for gas groups IIB and IIA.

Model Number 300

(Vertical, in-line, de�agration)

Flame Arrester

ergilR

ATEX approved

ergilR

ERG.FA.CTLG.0002.16

EGS Business Park B2 Kat: 11 No: 348 34149 Bakırköy, Istanbul/TURKEY E-Mail: sales@ergil.comPhone: +90 212 485 40 07 (Pbx) Fax: +90 212 485 40 42

Storage Tank Protection Equipment

Under normal operation the �ame element allows the bi-directional �ow of air and �ammable vapour, however

it introduces additional pressure loss, and this must be considered in the design of the system. If a �re or ignition

occurs external to the equipment and ignites the �ammable discharge, the �ame arrester will quench the lead-

ing �re by absorbing and dispersing the heat as it passes through the element.

The unit is supplied with an earth point, copper tag and cable. Periodically the cell can be removed for cleaning

or replacement.

The Model 300 de�agration �ame arrester is suitable for quenching subsonic �ames and should be mounted in

the vertical plane, close to the source of any potential ignition. It is suitable for use with any of ERGIL Storagetech

™ Pressure Relief, and Pressure-Vacuum Valves, and should be installed on the inlet to the Pressure Relief unit.

Construction

Standard sizes 1” to 12” DN25 to DN300

Flange drilling API Class 150, PN16, and Special

Flame element Stainless steel AISI 316 –L or 304-L

O-ring seal Nitrile, Special

Screen Stainless steel

Weather hood Carbon steel, Stainless steel or Aluminium

ATEX cert Ex II 1/2 G IIA

Paint �nish 1- Powder Coating, Colour RAL 9006

2- Epoxy Paint, Colour RAL 9006

3- Customer Speci�cation

Body / Flanges 1- Carbon steel

2- Stainless steel AISI 316 –L or 304-L

3- Aluminium4- Customer Speci�cation

ergilR

ERG.FA.CTLG.0002.16

EGS Business Park B2 Kat: 11 No: 348 34149 Bakırköy, Istanbul/TURKEY E-Mail: sales@ergil.comPhone: +90 212 485 40 07 (Pbx) Fax: +90 212 485 40 42

Storage Tank Protection Equipment

ERGIL StorageTech™ PW Model 300 intemal materials are AISI 316 or 304 stainless steel.

Easy to clean internal materials.

Easy to install. You do not need a special tool or experience to install the StorageTech Fame Arrester

Model 300.

ERGIL StorageTech™ PVV Model 300 comes with the paint color you choose.

Standard manufacturing comes with API 150 class flange; however other flange types are available on

request.

Protection cap is manufactured from aluminum material.

.

.

.

.

.

.

Key Features

Manufacturing Materials

IIA *304 S.S.

316 S.S.

Housing

Carbon Steel

304 S.S.

316 S.S.

Aluminum

Cell Gass Group

The size of the vent should be calculated in accordance with API Standard 2000 (ISO 28300) - Venting Atmos-

pheric and Low-Pressure Storage Tanks or other international standards.

Design & Manufacturing Speci�cations

ERGIL StorageTech™ Fame Arrester Model 300 provides safety. It blocks the flame and does not allow flame travel

through a pipeline or any in out-let. Protect s environment. FIame arrester prevents your facility against fire that

is caused by explosions.

Product Bene�ts

* Conditions apply.

ERG.FA.CTLG.0002.16

EGS Business Park B2 Kat: 11 No: 348 34149 Bakırköy, Istanbul/TURKEY E-Mail: sales@ergil.comPhone: +90 212 485 40 07 (Pbx) Fax: +90 212 485 40 42

Storage Tank Protection Equipment

ergilR

Weight & Dimensions

Technical Drawing

50

80

100

150

200

250

300

SIZE

NPS DN

2"

3"

4"

6"

8"

10"

12"

A B CD E F G Total

WeightANSI150# RF PN 16

ANSI150# RF PN 16

ANSI150# RF PN 16

ANSI150# RF PN 16

180

260

315

380

455

600

750

320

396

435

516

820

974

750

18

18

18

18

18

22

22

92

127

157.2

216

270

324

381

102

138

158

212

268

320

378

120.6

152.4

190.5

241.3

298.4

362

431.8

125

160

180

240

295

355

410

152

190

229

279

343

406

483

165

200

220

285

340

405

460

Ø19x4

Ø19x4

Ø19x8

Ø22x8

Ø22x8

Ø25.4x12

Ø25.4x12

Ø18x4

Ø18x8

Ø18x8

Ø22x8

Ø22x12

Ø26x12

Ø26x12

13.5

28.1

42.5

63.5

86.5

115.9

139.1

ERG.FA.CTLG.0002.16

EGS Business Park B2 Kat: 11 No: 348 34149 Bakırköy, Istanbul/TURKEY E-Mail: sales@ergil.comPhone: +90 212 485 40 07 (Pbx) Fax: +90 212 485 40 42

Storage Tank Protection Equipment

ergilR

Flow Capacity Tables

Pressure Drops (mbar)

Flow in Nm 3/h Air

Gas Group Element Pipe Size 5 10 15 20 30 40 50 60 70 80 90 100 150 200 300 400 500100/19/80 DN50 2" <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 0.7 0.9 1.1 1.4 1.6 1.8 3.2 4.8 8.5 12.7 16.8150/38/80 DN80 3" <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 0.5 0.7 0.8 0.9 1.0 1.6 2.4 4.2 6.2 8.6200/38/80 DN100 4" <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 0.5 0.9 1.2 2.1 3.0 4.1

IIA 300/38/80 DN150 6" <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 0.5 0.8 1.2 1.5400/38/80 DN200 8" <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 0.6 0.7500/38/80 DN250 10" <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5600/38/80 DN300 12" <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5

100/19/60 DN50 2" <0.5 <0.5 0.5 0.7 1.0 1.4 1.7 2.0 2.3 2.6 2.9 3.2 4.8 6.6 11.6 19.5 31.6150/38/60 DN80 3" <0.5 <0.5 <0.5 <0.5 0.7 1.0 1.2 1.5 1.7 1.9 2.1 2.4 3.5 4.6 6.8 9.1 11.8

IIB1, IIB2 200/38/60 DN100 4" <0.5 <0.5 <0.5 <0.5 <0.5 0.6 0.7 0.9 1.0 1.2 1.3 1.4 2.1 2.8 4.1 5.4 6.7& IIB3 300/38/60 DN150 6" <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 0.6 0.6 0.7 1.0 1.4 2.0 2.7 3.3

400/38/60 DN200 8" <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 0.6 0.8 1.1 1.5 1.9500/38/60 DN250 10" <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 0.5 0.8 1.0 1.2600/38/60 DN300 12" <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 0.6 0.7 0.9

100/19/45 DN50 2" <0.5 0.9 1.4 1.8 2.8 3.8 4.8 5.9 7.0 8.1 9.3 10.6 17.8 27.0 52.9 91.9 147.9150/38/45 DN80 3" <0.5 <0.5 0.6 0.8 1.2 1.5 1.9 2.3 2.7 3.2 3.6 4.0 6.2 8.7 14.3 21.1 29.4200/38/45 DN100 4" <0.5 <0.5 <0.5 <0.5 0.7 0.9 1.1 1.4 1.6 1.8 2.1 2.3 3.5 4.8 7.6 10.6 14.0

IIB 300/38/45 DN150 6" <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 0.5 0.7 0.8 0.9 1.0 1.1 1.6 2.2 3.4 4.6 5.9400/38/45 DN200 8" <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 0.5 0.6 0.9 1.2 1.8 2.4 3.0500/38/45 DN250 10" <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 0.6 0.8 1.2 1.6 2.0600/38/45 DN300 12" <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 0.6 0.8 1.1 1.4

100/19/15 DN50 2" 2.3 4.6 7.0 9.3 14.0 18.7 23.5 28.3 33.1 38.0 42.9 47.8 72.9150/38/15 DN80 3" 3.0 6.0 9.0 12.0 18.2 24.3 30.7 37.2 43.7 50.3 57.1 63.9 99.6 137.9 223.0 320.2

IIC 200/38/15 DN100 4" 1.8 3.5 5.3 7.1 10.7 14.3 18.0 21.7 25.4 29.2 33.0 36.8 56.5 77.0 120.9 168.6 220.4300/38/15 DN150 6" 0.8 1.7 2.5 3.4 5.1 6.8 8.5 10.2 12.0 13.7 15.4 17.2 26.1 35.1 53.9 73.4 93.8400/38/15 DN200 8"500/38/15 DN250 10"600/38/15 DN300 12"

Flow in Nm 3/h Air

Gas Group Element Pipe Size 600 700 800 900 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000 12000 14000 16000100/19/80 DN50 2" 20.6 23.6 25.4 150/38/80 DN80 3" 11.1 13.8 16.7 19.6 22.5200/38/80 DN100 4" 5.3 6.6 7.9 9.4 10.9 27.9 41.0

IIA 300/38/80 DN150 6" 1.9 2.4 2.8 3.3 3.9 10.3 18.2 26.5 34.1 39.9 42.8 400/38/80 DN200 8" 0.9 1.1 1.3 1.5 1.7 4.3 7.7 11.6 15.9 20.4 24.9 29.3 33.4 36.9 41.8 500/38/80 DN250 10" 0.6 0.7 0.8 0.9 1.0 2.5 4.3 6.4 8.9 11.5 14.3 17.3 20.3 23.3 29.1 34.4 38.8600/38/80 DN300 12" <0.5 <0.5 0.5 0.6 0.7 1.6 2.7 4.1 5.5 7.2 9.0 10.9 12.8 14.9 19.2 23.5 27.7

100/19/60 DN50 2" 49.3 73.9 150/38/60 DN80 3" 15.0 18.8 23.5 29.2 36.1

IIB1, IIB2 200/38/60 DN100 4" 8.0 9.5 11.1 12.8 14.7 52.6 148.7& IIB3 300/38/60 DN150 6" 3.9 4.5 5.2 5.8 6.4 13.9 26.4 47.7 81.8 132.4 203.5

400/38/60 DN200 8" 2.2 2.6 2.9 3.2 3.6 6.9 10.7 15.6 22.1 30.8 42.5 57.7 77.0 101.0 165.8500/38/60 DN250 10" 1.5 1.7 2.0 2.2 2.4 4.7 6.9 9.3 12.1 15.5 19.5 24.5 30.6 37.9 57.0 83.4 118.5 600/38/60 DN300 12" 1.1 1.3 1.4 1.6 1.8 3.4 5.0 6.6 8.3 10.2 12.3 14.6 17.3 20.5 28.3 38.6 51.9

100/19/45 DN50 2" 224.5 325.4 150/38/45 DN80 3" 39.4 51.5 66.0 83.1 103.0200/38/45 DN100 4" 17.2 22.2 27.0 32.5 38.6 148.3

IIB 300/38/45 DN150 6" 7.2 8.6 10.1 11.6 13.2 35.9 74.2 134.6 223.5 347.2400/38/45 DN200 8" 3.7 4.3 5.0 5.7 6.4 14.8 26.0 41.2 61.4 87.6 120.8 162.0 212.3 272.6500/38/45 DN250 10" 2.4 2.8 3.2 3.7 4.1 8.9 14.7 21.7 30.4 40.9 53.6 68.8 86.8 107.8 160.3 228.6 315.2 600/38/45 DN300 12" 1.7 2.0 2.3 2.6 2.9 6.1 9.7 13.9 18.7 24.3 30.7 38.2 46.7 56.4 79.9 109.5 146.2

100/19/15 DN50 2"150/38/15 DN80 3"

IIC 200/38/15 DN100 4" 276.4 336.9300/38/15 DN150 6" 115.0 137.1 160.0 183.9 208.8400/38/15 DN200 8"500/38/15 DN250 10"600/38/15 DN300 12"