FIXTURES | DESIGN | INSTALLATION - spacedd.comspacedd.com/pdf/SDD_Catalog_Final.pdf · fixtures are designed to display merchandise to its best advantage and are used in leading retail

FIXTURES | DESIGN | INSTALLATION

California Baptist University

Welcome and Thank You for giving us the opportunity to participate in your success. Whether you are about to embark on a brand new retailing project or are committed to raising your current space to new standards, our desire is to provide you with the best possible solutions, in a timely matter, at remarkable prices.

For over 25 years Space Design & Display has been working with retailers and manufacturers in multiple industries, to showcase and present their products and services in a better light. From smaller, individual accounts to multi-store chains, we take great pride in our personal, attentive service.

Although this book offers many options and a host of merchandising options, it is in no way complete. Many of our solutions involve custom applications or designs. Cabinet work, metal fabrication and acrylic options are our specialty. If for any reason the products in this catalog do not meet your specifications, we will gladly explore other sources. Our goal is finding creative solutions to maximizing the potential of your space in order to highlight your products.

I have been blessed enormously through the years with a loyal customer base, exciting and interesting projects and a dedicated staff willing to out perform my expectations. By all means, challenge us with your venture. We will strive to exceed your standards.

Happy Retailing,

Brian Nelson

President, Space Design & Display

Message from the President

Some of Our Valued Customers

Pharmaceutical

Book Stores

Educational

Party Stores

Beauty Supply

Convenience

Pet Stores

Power Sports

Rental

SPACE DESIGN & DISPLAY 1.951.734.2990 | 1.800.776.9527 | www.spacedd.com 3

Gondola Units ........................................ 4-6

Shelves........................................................7

End Caps ....................................................8

Accessories .......................................... 9-11

Pharmacy ........................................... 12-14

Hooks .................................................. 15-16

Slatwall .....................................................17

Med Pusher System ................................. 18

Showcases & Cash Wraps ...................... 19

Table of Contents


Gondola UnitsFEATURES• Heavy duty 12 gauge uprights roll-formed to close tolerances

and single slotted 1-1/4” on center. Each shelf bracket has its own slot

• 2-1/2” upright meets all load requirements for gondola and wallcases thru 12,000 inch lbs

• 4 positions shelves, to allow for many merchandising layouts• I-Beam design center base arms-with high strength steel hooks• Heavy duty 16 gauge cold rolled steel top caps and cross ties• 20 gauge cold rolled steel base guard protects the fixture from

damage. A customer safety feature• Electrical knock-out or hole on most components for ease in

wiring• Optional bumper guards contoured on end bases for

customer protection• Gondolas are used with a starter and add-on concept. Any

section of a tandem run can be isolated as a free standing module with the addition of end bottom arms, or inserted into other modular positions

Streater is a tough quality production fixture company. Streater store fixtures are designed to display merchandise to its best advantage and are used in leading retail stores throughout the country.

Width 30” - 36” or 48”

Height 38”- 96”

Depth 12” - 28”

Backs Solid, Pegboard, Perf & Groove or Slatwall

Colors 5 Standard and 9 Optional

Shelving 4 Position Shelving 10”- 28” Depth

AVAILABLE SIZES

FEATURES• Gondola components engineered of materials and finishes

that complement varying retail styles• Features high tensile steel uprights slotted one inch on

center for convenient shelf placement • Built in levelers and snap-together parts make installation

simple at the same time yielding an exceptional load capacity

• Shelves are strong and versatile with multi- position steel brackets to allow for multiple merchandising arrangements.

• Perforated shelving to accept all standard shelf accessories such as binning and wire dividers

Width 24”, 30”, 36” or 48”

Height 36” - 96”

Depth 13”- 31”

Backs Solid, Pegboard, Mirrored or Slat-wall

Colors 1 Standard, 16 Optional

Lozier is a leading manufacturer of store fixtures for both national and international markets. Lozier offers an extensive product line of front room and back room products. Many accessories are available to support a variety of retailing formats. We stock a large inventory of basic and complimentary items.

AVAILABLE SIZES

®


Gondola Units

Open Back Full Gondola Kit Open Back Half Gondola & Wallcase Kit

Width 30”, 36” or 48”

Height 51”, 56”, 61”, 71” or & 38” Avail.

Depth 12”, 14”,16”, 18”, 20”, 22”, 24” or 28”

Note Order 2 back panels per module

AVAILABLE SIZES

Width 30”, 36” or 48”

Height 51”, 56”, 61”, 71”, 86”, 96” or & 38” Avail.

Depth 12”, 14”,16”, 18”, 20”, 22”, 24” or 28”

Note Order 1 back panel per module

AVAILABLE SIZES

Width 24”, 30”, 36” or 48”

Height 36”, 42”, 48”, 54”, 60”, 66”, 72”, 78” 84”, 90” or 96”

Depth 13”, 16”,19”, 22”, 25”, 28”, or 31”

Note Backs included in kit

AVAILABLE SIZES

Width 24”, 30”, 36” or 48”

Height 36”, 42”, 48”, 54”, 60”, 66”, 72”, 78”, 84”, 90”, 96” 108”, or 120”

Note Backs included in kit

AVAILABLE SIZES

Back Panels

Solid Painted Back Panel

• 1/4” hardboard material

Painted Perforated Back Panel

• ¼” hardboard material• ¼” perforations spaced 1” on center

Perf Grooved Painted Back Panel

• 1/4” hardboard material• 1/4” perforations, 1” on center in grooved rows spaced 2” on center

Slatwall Back Panel

• ¾” MDF Material• Grooves 3” on center• Must use slatwall tie bar in place of standard tie bar• Available in painted or plastic laminated surface

Slatwall Back Panel with Metal Inserts

• ¾” MDF Material• Grooves 3” on center• Must use slatwall tie bar in place of standard tie bar• Available in painted or plastic laminated surface• Painted aluminum inserts

®


Full Gondola Starter Kit

Full Gondola Add-on Kit

Full Gondola Starter Parts

End Standards (2)

Pair End Bottom Arms (2)

Cross Tie (1)

Tie Bar (1)

Top Cap (1)

Base Deck (2)

Floating Kickplates (2)

Add-on Full Gondola Kit PartsCenter Standard (1)

Center Bottom Arms (2)

Cross Tie (1)

Tie Bar (1)

Top Cap (1)

Base Deck (2)

Floating Kickplates (2)

1

3

5a

6

7

8

9

2

4

6

7

5a

9

8One starter kit is required per gondola run.

One Basic Upright

Two Base Shoes

One Upright Cap

Two Pair Base End Covers

Two Upright End Covers

A

B

C

D

E

Gondola Section

Gondola EndsOne Gondola End is required to complete any length Gondola run…each Gondola End consist of:

Gondola Sections

Each Gondola Section locks to the adjacent section for any length Gondola run….each section consist of:

Two Kickplates

Two style Base Shelves

Two backs, MM, PP or MP …two piece backs at 78” and above

One Top Rail

One Center Rail from 42” up to 96”

Plus one SS Splicer Rail at 78” and above

One Bottom Rail

One Basic Upright

Two Base Shoes

One Upright Cap

F

G

H

I

J

K

L

M

Gondola EndN

Gondola Units – Exploded View

®


TL Two Position

7” 36” or 48” 300 lbs. 250 lbs. 125 lbs.

10” 36” or 48” 500 lbs. 250 lbs. 250 lbs.

13” 36” or 48” 500 lbs. 250 lbs. 250 lbs.

15” 36” or 48” 500 lbs. 250 lbs. 250 lbs.

16” 36” or 48” 500 lbs. 250 lbs. 250 lbs.

17” 36” or 48” 500 lbs. 250 lbs. 250 lbs.

DL Four Position

19” 36” or 48” 500 lbs. 250 lbs. 250 lbs.

20” 36” or 48” 500 lbs. 250 lbs. 125 lbs.

22” 36” or 48” 500 lbs. 250 lbs. 125 lbs.

25” 36” or 48” 400 lbs. 200 lbs. 125 lbs.

28” 36” or 48” 400 lbs. 200 lbs. 100 lbs.

31” 36” or 48” 400 lbs. 200 lbs. 100 lbs.

AVAILABLE SIZESLozier Standard Upper Shelves• Sleek, slim bracket designed for maximum merchandise visibility• 1 ¼” tag moulding integrally formed into the front edge of shelf surface

Available in TL - Two Position and DL - Four Position. All parts available in HL - Heavy Duty material that supports up to 700 lbs.

DEPTH WIDTHLOAD CAPACITY

17°FLAT 30° (PL Only)

Standard Shelf Features• Adjustable to four positions, maximizing

merchandising capabilities, 12 degree up, flat, 15 or 30 degree down

• One piece shelf pan with 1 ¼” ticket moulding• Attractive ½” on center diamond shaped

perforations accept all standard merchandising accessories such as fencing and dividers

• Textured metal finish is exeptionally durable while easier to clean and maintain

Heavy Duty 2-Position Shelf

Stan-dard Shelf Sizes

8” 350 lbs. 400 lbs. 400 lbs.

10” 350 lbs. 400 lbs. 400 lbs.

12” 500 lbs. 500 lbs. 500 lbs.

14” 500 lbs. 500 lbs. 500 lbs.

16” 500 lbs. 500 lbs. 500 lbs.

18” 500 lbs. 500 lbs. 500 lbs.

20” 400 lbs. 400 lbs.

22” 350 lbs. 350 lbs.

Heavy-Duty Shelf Sizes

20” 600 lbs. 600 lbs.

22” 600 lbs. 600 lbs.

24” 600 lbs. 600 lbs.

28” 600 lbs. 600 lbs.

DEPTH

AVAILABLE SIZES LOAD CAPACITY36”30” 48”

Steel Product Retainer

Load capacities listed represent the maximum evenly distributed weight that is recommended for each shelf. Reduce capacities shown by 30% if only the front half of the shelf is to be loaded

• Adjustable 2 position shelf, level and 20 degree downslant

• 1” high steel installs into front row of perforations on shelf

Shelves

®


Feature End Frame

End displayers - Ideal for promotional use at the end of a Gondola run

• Used at end of run with or without contour end base

• Shipped assembled with one or two back panels- order separately

• Kit includes t-brace and fasteners

Width 30”, 36” or 48”

Height 51”, 56”, 61”, 66”, 71” or 86”

Weight Limit

Total weight carried not to exceed 800 lbs.

No single shelf to carry more than 350 lbs. evenly distrib-uted pounds

AVAILABLE SIZES - END FRAME

Half Gondola End Cap

Contour End Base• Used at end of run• Shipped assembled• Order levelers or casters separately

Width 26” to 46”

Height 12”, 14”, 16”, 18” or 24”

Note Widths fit 12” thru 28” bases both sides

AVAILABLE SIZES - END BASE

• Half gondola can be used as end cap by adding a flush base and back panel to reverse side

• Used at end of gondola run• ½ gondola may also be used

at end of Gondola

Width 24”, 30”, 36”, 42” or 48”

Height 48”, 54”, 60”, 66”, 72”, 78”, 84”, 90” or 96”

Wall End DisplayMerch Panel & Contour End Display

End Caps

®


Convert your unused space into sales space! Extender Kits For Existing Wallcase and Gondola

Starter Add-on

• ¾” MDF, painted 1 face • T-Slots 3” o.c.• Delete tie bar from extender kit

and replace with slatwall tie bar

Solid back• ¼” hardboard, painted 1 face

baked enamel• Includes H-channel

• ¼” hardboard, painted 1 face slatwall

Slatwall

Extender Back Kits for Existing Wallcase and Gondola

Extention Uprights

Width Order 1 center spanner for 6” thru 36”

Order 2 center spanners for 48” or larger

Height 6”, 12”, 18”, 24”, 30”, 36” 42”, 48” or 54”

Extention upright

• Trim off extension uprights at end of unit runsExtention upright end

covers

36 or 48spanner

Order backs to match height and width of extender

• Each starter kit contains 2 end extender standards and a tie bar (5” extender kit does not contain tie bar)

• Each add-on kit contains 2 end extender standards with hardware for assembling and a tie bar

• Order back panel separately (see below)

Width 30”, 36” or 48”

Height 5”, 10”, 15” or 25”

Perforated back

Accessories

®


• Chrome plated rod in 30”, 36” and 48” lengths • Brackets available in 12” and 14” depths

Cross Bar

full, straight half, profile half, straight

• Available in different depths allowing for a tiered display • Use crossbar hooks and accessories see page (16 ) • 48” module lengths• Depths - 1”, 3”, 6”, 8”, 9”, 12”

Wallmount Standard• Insert & double slotted• Painted standard colors. 7/8” depth• Available in 41” and 86” heights

Starter

Finish off your wall units with a colorful top valance. Top panels used for extra storage. Light fixture available.

Metal or Laminate Wood Cornice

Top Panel• Painted ¾” thick panel• Available in 3’, 4’, 6’, and 8’ lengths

Metal or Laminate Cornice Returns• Available in two telescoping ranges• 16” to 25” and 25” to 35”

Metal or Laminate Cornice Kits • Available in 3’, 4’, and 8’ sections• 8” High• Starter kit contains metal facia and 2 shelf-mount brackets

(brkts extend 7”)• Add-On kit contains metal facia and 1 shelf-mount bracket• Color Matching returns can be ordered (see below) or

color matching end panels (bottom of this page)• Order shelf separately

HangrodTelescoping Cornice Bracket

• Standard colors• Standard sizes 10”, 14”, 18”, 22”

Gondola and Wall End Panels• Half and full panels, profile and straight style• Straight panel heights 38”, 51”, 56”, 61”, 66”, 71”, 87”, 97”• Fits widths of 14” thru 28” base depths, half and full gondola• Radius and custom ends available

full, straight half, profile half, straight

Flange Brackets

Add-on

Accessories For Gondolas

• Hooks into upright, telescopes 20” to 34”• Specify left or right hand


Gondola and Wall End Panels

Accessories For Gondolas

Shelf Fencing and Dividers

Wire Baskets & Dividers

• Durable chrome finish• Snaps directly into shelf perforations (specify shelf manufacturer when ordering)• Stops unwanted product movement

Height 3” High & 6” High

Length 8”, 10”, 12”, 14”, 16”, 18”, 20”, 22”, 24”

AVAILABLE SIZES

Width 30”, 36”, & 48”

Height 1”, 3” & 6” High

AVAILABLE SIZES

Fence Dividers

Front Fence

FEATURES• 8” high basket & 6” high sloped front• Several Bracket styles available • Optional lock-in dividers adjust on 1” centers• Freestanding stacking units shown at left

Width 36” or 48”

Depth 12”, 14”, 16” or 18”

AVAILABLE SIZES


• Steel construction and baked enamel finish give a solid, clean look

• Single and double sided• Spanning 5 different widths in the single and 4 in the double,

result in endless choices for laying out your work area• Cap off the ends with 15” wide melamine overlay end panels• Bottle Bays are easily assembled at your pharmacy

Bottle Bays

Width 15” (single sided only), 24”, 29”, 36” 44”

Height 85 ¼”

Depth 7 ¾” or 15”

Note Steel shelves qty 8 for single, qty 16 for double.Extra shelves order separately.

AVAILABLE SIZES

®

Flex-Rx Storage System

• Uprights constructed of 1” x 1.5” tubular steel that provides greater stability

• Locking structural components• Aisle and wall stretchers stabilize runs• Open back design• One inch spacing of shelves and smaller widths

allow excellent positioning of various packaging

Width 16.5”

Height 84”

AVAILABLE SIZES (pharmacy units)

Pharmacy shelf dividers available • Shelves two position, O degree or 12 degree

Width 16”, 32”, 36” or 48”

Depth 7¼”

AVAILABLE SIZES (shelves)

Pharmacy


Width 16”, 32”, or 48”

Height 84”

Note Hooks and shelving install without tilting, they can be repositioned fully merchandised. Additionally, pegged and shelved items can be intermixed on any size module.

Width 16”, 32”, or 48”

Height 84”

Note Unit shown includes 16” end merchandising panel and metal base decks.

Will Call Hang Bar• Will call system with bag delivery options available

Uniweb Base Deck• 7” deep and available in 16”, 32” and 48” lengths

Uniweb Shelf• 7”x16” tray system allows for random placement

of shelves. Other sizes available

• Maximum capacity units with optional decks, shelves and end panel

One-Sided Wall Assembly with Base Deck

Two-Sided Island Assembly with End Panel

Uniweb SlimLine

Two-Sided Assembly with Shelves and Decks


Waste cabinet

Drawer and half door cabinet

Printer cabinet with printer drawer

3 drawer vial/ bottle cabinet

5 drawer RX cabinet Over sink cabinet

• 24” half door specify left hand or right hand (left hand shown)

• 24”W x 38”H x 23”D• Edges prefinished w/2mm white vinyl• Includes 1 shelf• 24” adjustable shelf unit specify left hand or

right hand

• 23 15/16” width• Must be used with 30” countertop• Printer drawer is longer to allow greater

extension• Printer shelf is 22 1/2”W and 28”D

• Each drawer has 4 adjustable dividers

• Modular cabinet, size (unless otherwise noted) is 24”W x 38”H x 38”D

• 4” high by 2” deep toe kick

• White vinyl edging for front edges

• Drawers installed on 20” 100 lb load capacity glides

• Pulls on drawers and doors

• Shelves adjustable

• Counter tops constructed on 13/16” material

• Back splash 4” high 13/16” material

• Standard color frosty white, other laminates available

• Partial backs

All pricing available upon requests Pricing on optional colors also available upon request

• 4 bottom drawers divided into 3 sections with card following system

• Top drawer includes a lock

• 30”H x 28”W x 11”D• 2 adjustable shelves

Basic open cabinet• Left hand, right hand available• Optional sink available with door

Locked drawer cabinet• Includes one adjustable shelf

4 drawer accessory cabinet

Half modular cabinet• 12” wide• CPU pull-out drawer available

3 drawerlocked

narcotics• Specify

right or left opening door

• Completely closed back

Pharmacy Woodflex


• Label holder lifts up for easy product removal & fast restocking

• Works with adhesive labels or non-adhesive tags• Custom powder coated colors available• One piece construction• Label holder sold separately in 2”, 2½” & 3” lengths

FastFlip Scanning Hooks

Medium Duty

.186 Diameter

Heavy Duty .212 Diameter

R45-4-186US R45-8-212US

R45-6-186US R45-10-212US

R45-8-186US R45-12-212US

R45-10-186US

Part

#

HooksWe offer a wide variety of stock hooks but also have many non-standard and custom options available.

Standard Duty

.149 Diameter

Medium Duty

.177 Diameter


R21-2-S R21-4-M R21-4-H

R21-4-S R21-6-M R21-6-H

R21-6-S R21-8-M R21-8-H

R21-8-S R21-10-M R21-10-H

R21-12-M R21-12-H

Part

#

AVAILABLE SIZES

• Fits in ¼” peg & or slatwall backs• One piece construction - use Quad-Wire, Fast

Tag, R36 or metal plate label holders

• With ball tip ends fits in 1/8” & 1/4” pegboard and slatwall except heavy duty which only works in ¼” peg or slatwall

All-Wire Scanning Hooks

All-Wire Hooks

Medium Duty

.186 Diameter


R45-4-186 R45-6-212

R45-6-186 R45-8-212

R45-8-186 R45-10-212

R45-12-212

Part

#

Fast Flip Label Holder

Fast Flip Hook


Easy to install, works in ¼” peg backs and slatwall. Installs directly under

shelves and existing merchandise. Replacement backs and stems also

can be purchased separately.

Fastback® Single Stem Hooks• Number after dash represents length• Offered in qty packs, lower prices available for large

quantities• Call Space Design and Display to receive a quote!

Standard Duty.149 Diameter

Medium Duty .186 Diameter


R22-2 R30-4 R23-4

R22-4 R30-6 R23-6

R22-6 R30-8 R23-8

R22-6 R30-9 R23-9

R22-8 R30-10 R23-10

R30-12 R23-12

R23-14

R22- repalcement back white

R30 replacement back beige

R23-replacement back white

Part

#

AVAILABLE SIZES

Fastback® Scanning Hooks• Variety of label holders available• Also available with metal back, call for details!

Medium Duty.186 Diameter


Extra Heavy Duty

.250 Diameter

Ultra-Heavy Duty

(3 Prong Back) .250 Diameter

R33-2-186 R-4-212 R33-6-250 R34-9-250

R33-4-186 R-6-212 R33-8-250 R34-12-250

R33-6-186 R-8-212 R33-9-250 R34-14-250

R33-8-186 R-9-212 R33-10-250 R34-16-250

R-10-212 R33-12-250

R-12-212 R33-14-250

R-14-212 R33-16-250

R-16-212

R33-186-100 replace-ment back beige

R-212-200 replacement back grey

R33-250-100 replace-ment back white

R34-100 Replacement Back

Part

#

AVAILABLE SIZES

R33 Back R34 Back

Fastback® Hooks Many more hook styles available. Call for details.


Galvanized zincPurchase label holder separately3/16” x 4”, 6”, 8”, 11”

Available in chrome, black or white ¼” x 1”, 2”, 4”, 6”, 8”, 10”, 12”

Slatwall Hook Flip Scan Hook

With J hookschrome, black or white ½” x 1 ½” x 13 ½”

Other sizes available

Rectangular Slatwall Waterfall Square Slatwall WaterfallChrome, black or white ¾” x 16”

Acrylic Literature Holder

Chrome, white or black 12” x 12” x 8”

Raw MDFUnfinished

Square Slatwall Basket

Paint Grade

MANY MORE SHAPES AND SIZES AVAILABLE !

MANY MORE STYLES AVAILABLE!

Acrylic Slatwall Shelves

Low Pressure Melamine

4” x 24”, 6” x 16”

White, Grey, Black, MapleOptional color inserts

Horizontal Styles 7” x 5 ½”, 11” x 7”, 11” x 8 ½”, 14” x 11”Vertical Styles 5 ½” x 7”, 7” x 11”, 8 ½” x 11”, 11” x 14”Custom Sizes Available

Multiple color optionsStrongest surfaceMaximum weight capacity

Available in chrome, black or white6”, 8”, 10”, 12”, 14”, 16”

Slatwall Shelf Bracket

Acrylic Slatwall Sign Holders

Laminate with Metal Inserts

Slatwall


Med Pusher Shelf Management System

Med Pusher Hook System

Boost your sales and more effectively merchandise your shelving by using our Med Pusher System. Spring loaded tracks continually front face your product and always show a “full” shelf. Use this dynamic system for impeccable merchandising capabilities and give that professionally always-stocked look.

Width Fronts: 30”, 36”, or 48”Dividers: 10” or 12”

Height Fronts: 2”Dividers: 3”

Note Self-facing tracks to automatically advance products. Beige high-impact plastic front rail and dividers.Clear PETG front lens.

Height 10” & 12”

Note Available in low, medium and high strength spring.

Med Pusher System

Cabinets | Casework | Showcases


1832 Railroad Street , Corona, CA 928801.951.734.2990 | 1.800.776.9527 | www.spacedd.com

Documents

FIXTURES | DESIGN | INSTALLATION - spacedd.comspacedd.com/pdf/SDD_Catalog_Final.pdf · fixtures are designed to display merchandise to its best advantage and are used in leading retail