First Choice Industrial,firstchoiceind.net/FirstChoiceIndustrialBrochure.pdf · First Choice Industrial, LLC First in customer satisfaction ... Superfici supplies complete lines and

First Choice Industrial, LLC

First in customer satisfaction

First Choice Industrial, LLC 145 Auburn Park Drive, Auburn, Georgia 30011 Phone: (678) 642-9722 Email: [email protected]

F C I

First Choice Industrial,

LLC

A FULL SERVICE WOODWORKING

MACHINERY &

EQUIPMENT DEALER

SERVING CUSTOMERS

NATIONWIDE

2011





F C I

First Choice Industrial LLC, is an authorized SCM Woodworking Machinery & Commercial Equipment Dealer




F C I

Our additional suppliers include . . . __________________________________________________________________________

LARICK

http://www.kochmachinery.com/�




F C I

Our professional services include . . . ____________________________________________________________________________

New woodworking machinery & equipment sales

Used woodworking machinery & equipment sales

Machinery repair & installation

Repossession Services:

• machinery evaluation • de-installation • remarketing • storage • consignment sales

LEEDS Consultation

Leasing

http://www.firstchoiceind.net/�

http://www.preownedwoodworkingmachinery.com/�




F C I

First Choice Industrial LLC

145 Auburn Park Drive Auburn, GA 30011

Email: [email protected] Phone: 678-642-9722 Fax: 770-242-9388

________________________________________________________________________________________________________________

Owners

Stan Paszkowski

770-861-0570

S.Georgia & N.Florida [email protected]

Randy Majerus

770-861-0568 North Georgia [email protected]

____________________________________________________________________________________________________________________

To Contact A Regional Sales Representative

Call: 678-642-9722 or

Email:[email protected] _______________________________________________________________________________________________________________

Web Sites: http://www.firstchoiceind.net/ http://www.preownedwoodworkingmachinery.com/ Blog: http://firstchoiceind.net/blog/ Join us on . .

http://www.firstchoiceind.net/�

http://www.preownedwoodworkingmachinery.com/�

http://firstchoiceind.net/blog/�

http://twitter.com/FirstChoiceInd�

http://www.linkedin.com/profile/edit?trk=hb_tab_pro_top�




F C I

WIDE BELT SANDERS

For over 50 years SCMI has manufactured the most accurate and reliable wide belt sanders in the industry. SCMI has you covered with the finest finish in the business with state-of-the-art dead shaft technology design and zero reference point alignments. The number one selling sanders in the world! These machines come in single head and up to five heads for solid wood and veneer.

SANDYA SERIES

Industrial Wide Belt Sanders

Sandya Uno Sandya 3S Sandya 5S Sandya 9S Sandya 16S

DMC

Advanced Wide Belt Sanders

Technosand K Unisand K Mastersand

MOULDERS SCM Group-USA offers a range of through-feed moulders designed to withstand the demands of the U.S. Woodworking Industry. "Superset" spindle positioning, pneumatic chip breakers, superior spindle design, and monoblock unitized construction are just a few exclusive features that set SCM Moulders apart from all of the others. With seven product ranges and sixteen configurations available, SCM has your moulder solution.

Compact XL Superset XL Topset XL




F C I

PROFILE GRINDERS GANG RIP SAWS

EDGEBANDERS

With all new models, the SCMI edgebander line is more competitive than ever. Being the heaviest in the industry, allows for stability and ease of production. From tape machines to computerized double-sided banders, SCM has a bander for any size shop.

OLYMPIC K AND S SERIES

Industrial Line Edgebanders

Olympic K 300 Olympic K 500 Olympic S2000

STEFANI

Advanced Line Edgebanders

Stefani Solution Stefani Evolution SB Stefani Solution HD

Saves time and money. Grind your own knives for your moulders and shapers.

75-12 Profile Max 300

These saws will rip a mountain of lumber in a matter of minutes. Available in 42HP and 60HP

M3

http://scmgroup-usa.com/cat-Gang_Rip_Saws-48.aspx�

http://scmgroup-usa.com/cat-GABBIANI-116.aspx�




F C I

PANEL SAWS

SCM GROUP USA Sigma and Gabbiani Series Panel Saws offer superior features and superior speeds not found on other panel sizing machines in this class. Accuracy, dependability, and functionality are a few characteristics synonymous with the Sigma and Gabbiani Series Panel Saws.

SIGMA SERIES

Industrial Line Panel Saws

Sigma Impact 85K Sigma Impact 105 P Sigma Plus 107 P

GABBIANI SERIES

Advanced Line Panel Saws

Galaxy 125 Galaxy 140 Axioma 125 Ocean

TENONERS

The Concept Series of tenoners were designed for accuracy over time, throughput productivity, and a dramatic reduction in set-up time. The set-up time reduction is via CNC axis and spindles with rapid tool changers. With over 40 working units available a machine is likely available for your application.

CONCEPT SERIES

Concept Mono Concept NT

http://scmgroup-usa.com/cat-Panel_Sizing-40.aspx�




F C I

SCM GROUP CLASSICAL LINE MACHINES

SCM GROUP USA offers a wide range of their classical line of machines: jointers, planers, sliding table saws, shapers, routers, and boring machines.

SLIDING TABLE SAW

The first 10' stroke model offered is basic on features, and heavy on quality and reliability. This 12" blade saw is designed to be an economic solution for the small shop yet it includes high-end construction features, ensuring a long operating life.

SI 300 Nova

Other Sliding Table Saws Include: SI 300 S Nova, SI 400 Digital Nova, S 400 EP3 Nova, SI 300 Series, SI 400 Series and SI 400 Vanguard

SHAPERS

TI 115 NOVA is the SCM heavy industrial shaper designed for full production workloads ensuring maximum finish quality in the work piece.

TI 115 Nova

Other Shapers Include: TI 110 Nova, TF 130 Class, and TI 155 Class

JOINTERS

The 1,653 pound SCMI F 410 NOVA 16" jointer is distinguished by its high degree of safety and reliability over time.

F 410 Nova

Other Models Include: F 520 Nova, 20” Model

PLANERS

The SCMI S 520 planer is noise level rated at only 70 decibels making it the quietest planer in its range.

S 520 Nova

Other Models Include: S 630 Nova




F C I

SUPERFICI FLAT LINE FINISHING MACHINES

Superfici supplies complete lines and individual machines, which include: Sprayers, Roller Coaters, Curtain Coaters, Brushing Machines, Denibbers, UV Dryers, Stacking Dryers, Flat Dryers, Conveyors, Material Handling, and related equipment.

Individual Spray Unit Compact Reciprocating Spray Line

CNC MACHINING CENTERS & ROUTERS "Dollar for dollar" the SCMI Machining Center is the best in the industry. Whether it's nesting or machining, we have the solution to fit your shop.

PRATIX N SERIES

The Pratix N Series is a CNC boring and routing center for nesting operations. The Pratix N Series has a 4’x 8’ or 5’x12’ table and an easy to use, entry level, CNC with a multilayer high-rigidity, phenolic worktable and easy to use vacuum with a patented magnetic system, as well as an electrical cabinet and vacuum pump incorporated into the machine base.

TECH Z SERIES

The Tech Z Series Models Z25 & Z30 have a full of array of features that make these machines very capable and versatile. With a large drill head, grooving saw and robust electro spindle; just to name a few, the Tech Z is a versatile high performance Point to Point machine for a practical price.




F C I

ROUTECH & MORBIDELLI CNC MACHINING CENTERS

Routech and Morbidelli manufacture a comprehensive range of CNC machinery with valuable features available to minimize changeover time, while decreasing cycle times. Routech and Morbidelli routers include installation on site with software and machine training.

ROUTECH CNC Routers

Record 125 Series Record 132 Series Record 210 Series

MORBIDELLI Advanced CNC Machining Centers

Universal NBR Author 300 Series Author 600 Series

STRIEBIG COMPACT STRIEBIG EVOLUTION

With their own manufacturing methods and a high proportion of in-house production, Striebig AG puts all their know-how into the production and development of vertical panel saws. Simply the World’s Best Vertical Panel Saws for Panels or Solid Surface. These saws will improve your accuracy, productivity and repeatability.




F C I

NEDERMAN - (DANTHERM) - FILTRATION

Bags (Standard) Barrels (Optional) Dump Bin (Optional) Quick to install and easy to operate, S-Series dust collectors are the ideal solution for the smaller workshop. Designed for indoor locations, S-Series dust collectors and can be readily re-located as required. The S-Series comes in 3 models. The S-500 (5hp) The S-750 (7.5hp) and The S-1000 (10hp). CFM Range: 1,500 to 5,000 CFM

Key features

• Neat, compact, unobtrusive • Quick and easy to install • Bag or steel bin dust collection options • Standard units in three sizes • One bag size fits all • Quiet running efficient 1450 RPM fans • Simple maintenance • Dantherm QF versatile clip together duct connections

Typical applications

• Woodwork, dust extraction from small and medium workshops • Mixed workshop applications • Educational workshops – ceramics, crafts, woodwork




F C I

CA, CAM Cyclone Separator

The CA and CAM is a range of ten cyclone separators designed with high efficiency in mind. The CA type offers an economic solution for normal duty. The CAM is a heavy duty unit to withstand abrasive materials.

Key features

• Robust fully welded steel construction • Weatherproof for exposed locations • Normal and heavy duty options • 10 sizes from 500 to 20000m3/h • High efficiency up to 90% at 4 micron • Wide range of options • Also available in stainless steel or aluminum

Typical applications

• General purpose pre-separation duties • Heavy duty pre-separation of abrasive materials • Separation of materials in pneumatic transport systems




F C I

NFP Bag Filters

The NFP reverse air, dust collector is suitable for airflows between 1,000 and 9,000 CFM and is available in OPEN or CLOSE panel construction. It also has the option for manual or reverse air cleaning.

CFM Range: 1,000 to 9,000 CFM

Key features

• Modular • Expandable • Quiet operation • Small footprint • Indoor & outdoor units available • Bag or barrel material collection

Typical dust control and process applications

• High Speed Routing • Sawing • Cutting • Sanding • Single ‘Cell' Manufacturing • After-Filters




F C I

CS Bag Filters

The CS is a larger, reverse air, dust collector suitable for airflows between 4,000 and 20,000 CFM with various hopper discharge options.

CFM Range: 4,000 to 20,000 CFM

Key features

• Modular • Expandable • Customizable range • Fully automatic operation • Low profile • Quiet operation • No compressed air requirement • Multiple waste collection options


• High Speed Routing • Cutting • Centralized Systems • Sanding • Grinding • After-Filters




F C I

NFK3000 Bag Filters

The NFK3000 filter is a compact filter, well suited for any air flow with heavy material content. It is designed with a basic module size of 1200 x 1200 mm. Additionally, the design makes it possible to add modules if the capacity is increased. The filter is self-supporting with telescopic supporting legs suitable for outdoor locations.

Each module (either 1200 or 2400 mm wide) of the filter construction is fitted with a combined inspection and explosion relief door. Regeneration fans are fitted for easy and effective cleaning of the filter bags. The NFK3000 filter is fitted with the unique patented Dantherm Filtration SUPERBAG filter bag. The filter hopper and the inlet section (optional) separate the particles and distribute the air to the filter bags. The collected material can be removed through a wide range of discharge and waste handling options. CFM Range: 1,000 to 300,000 CFM Key features

• Modular galvanized steel construction • Easy to install on site and extend if required • ATEX certified for St1 and St2 dust with a Kst value up to 300 bar m/s. • Available for positive or negative pressure operation • Low power consumption • Powerful on-line cleaning by efficient regeneration fans • Patented polyester SUPERBAG filter bags • Wide range of discharge and waste handling options


• Timber and Wood working machinery • Furniture production • Lightweight bulk materials




F C I

U.S. CONCEPTS

US Concepts has developed and built hundreds of for any size woodworking shop. arch moulders, haunchers, and profile sanders

WEIMA WASTE GRINDERS KAESER COMPRESSORS

UNIQUE MACHINE AND TOOL CO. NORDFAB

Cut your waste hauling costs in half. Weima can grind your wood waste and send it up the dust chute or into the dumpster.

Kaeser earns their customer’s trust and satisfaction by manufacturing the highest quality compressed air and blower products available anywhere.

Unique Machine and Tool Co. has been producing the Raised Panel Door Machine for over 18 years with satisfied customers throughout the world!

Nordfab introduced Quick-Fit in 1990. As well as being the originator, Nordfab is the industry leader, and the world’s largest supplier of clamp-together ducting.




F C I

RITTER MANURACTURING INC RAZORGAGE

BALESTRINI COL-MET SPRAY BOOTHS

ITALPRESSE NORTHTECH

Ritter Manufacturing, Inc. is a manufacturer of drilling and boring, shaping, sanding, clamping machines, assembly systems, and related specialty machines used in the woodworking industry.

RazorGage provides positioning and optimizing systems, also known as digital stops, automated stop gauges or pusher gauges, that are designed to accurately cut your components every time.

Balestrini manufactures high-tech CNC machining centers for professional quality miter door production.

Col-Met Spray Booths is a manufacturer of paint booths, spray booths, powder booths, air makeup units, mixing rooms, batch ovens, and accessories for industrial, automotive, wood finishing, and other applications.

Italpresse has supplied hydraulic press and thermofoil press systems to worldwide markets for more than forty years, establishing it as an industry leader with products known for quality, value, and reliability.

A complete line of Machines, including shapers, planers, jointers, sanders, saws and moulders for the budget minded woodworker.

http://rds.yahoo.com/_ylt=A0WTefRkGlJLQI8AaoejzbkF;_ylu=X3oDMTBxdjJja2ViBHBvcwMyBHNlYwNzcgR2dGlkAwR5aXNmcgMx/SIG=1ht1evdsc/EXP=1263758308/**http%3A/images.search.yahoo.com/images/view%3Fei=UTF-8%26p=usa%2Bflag%26h=595%26rurl=http%253A%252F%252Fwww.goldenamericas.com%252F%26imgurl=www.goldenamericas.com%252Fwp-content%252Fuploads%252F2009%252F04%252Fus_flag.jpg%26back=http%253A%252F%252Fsearch.yahoo.com%252Fsearch%253Fei%253DUTF-8%2526p%253Dusa%252Bflag%252Bpicture%26rcurl=http%253A%252F%252Fwww.goldenamericas.com%252F%26type=jpeg%26oid=a647556d1a342784%26w=944%26size=39.9kB%26name=us%2Bflag%2Bjpg%26no=2%26tt=336%252C282%26sigr=10u7f40s2%26sigi=11tp5461a%26sigb=11qj9pcje%26tit=us%2Bflag�





F C I

DENRAY MACHINES OPTI-SAND

RADIO FREQUENCY SYSTEMS SOUTHWORTH

PAUL SAWS JLT CLAMPS

Denray down draft tables are an industry leader in wood, metal, and many other dust control applications which are specially suited to control dust during sanding, routing, cutting, and finishing of wood, fiberglass and plastics as well as welding, grinding, polishing, and cutting of metal products.

Opti-Sand produces sanding machines for sanding mouldings, trim, flooring, linear parts, bleacher seats, paneling, entry doors, cabinet doors, drawer fronts, face frames, MDF parts for powder coating, office and home furniture components and more.

Radio Frequency Services is the #1 manufacturer of radio frequency edge and face gluing systems, including the Slant Bed product lines.

Southworth offers more ergonomic lifting and positioning equipment designed to improve worker safety and increase productivity than any other materials handling company.

The range of machinery has been expanded and defined over the years and today Paul is able to offer machinery and systems for both ripping and crosscutting of solid wood and panels.

JLT machines are specifically designed to increase production and quality, while saving valuable shop floor space. Over the years, the JLT product line has expanded to offer innovative machines such as the very successful Pneumatic Miter Door Clamp and Rotating Miter Door Pro.









F C I

DOUCET




F C I

DOUCET Continued




F C I

DOUCET Continued

Doucet Machinery for the furniture and woodworking industry is a leading manufacturer of automatic return conveyors and material handling solutions that will “streamline” your manufacturing operation and bring your labor cost under control. Additional Doucet Machinery solutions, include end matchers, return conveyors, clamp carriers, sanding and boring machines, and more...

KOCH KREG

OMEC FLEX TRIM

KOCH is known world-wide for high-tech boring and dowel insertion machinery for the manufacturing of furniture, cabinets, windows, doors, and other wood related products.

Kreg Tool Company has emerged as the leader in Pocket Hole Technology. From the manual K3 Kreg Jig®, to the fully-automatic Pro Series machines, Kreg offers a simple solution that has changed the way thousands of woodworkers join wood.

OMEC specializes in the production of a wide range of manual and automatic dovetailing machines.

Flex Trim A/S develops, manufactures, and sells sanding solutions based on a patented and international renowned brush technology.





F C I

OMGA PISTORIUS

LARICK POWERMATIC

SCHMALZ AETNAGROUP

AETNA GROUP produces and sells stretch wrapping machines, bundlers, shrink film wrappers, cartoning and taping machines on a worldwide basis

OMGA is known worldwide for their accuracy in miter and radial arm saws.

PISTORIUS offers an extensive variety of machines for numerous applications. From mitering and double-cut machines, to milling, haunching, and finishing.

Larick Profile Sanders and Shaping Machines are perfect for raised panels and outside door edge profiles.

Schmalz vacuum lifting devices simplify daily handling tasks— work pieces weighing up to 4,400 pounds can be lifted with the standard models.

Powermatic is one of the oldest names in the woodworking business for yielding professional production results without breaking the bank.

http://us.schmalz.com/�






F C I

ACCU SYSTEMS

Accu-Systems specializes in building custom machinery to fit customers’ needs, currently producing 30+ custom machines per year, at their production facility and machine shop with the support of in house mechanical and software engineers that can drive these custom projects thru to completion.

CARLSON SYSTEMS ENGINEERING

Carlson Systems Engineering, has over 35 years e have grown our expertise into the custom design and build of assembly systems for wood, vinyl, aluminum and glass.




F C I

SCMi LEASING SCMi Leasing is the answer when financing any capital woodworking machinery. They have

over fifteen years experience as a leasing agent. There is very little paperwork and same day

approval.

The company is owned and operated under SCM Group North America which is located in

Duluth, GA. By being closely oriented with SCM Group North America, SCMi Leasing has a

leg up on the competition, due to the available knowledge about the collateral used when

applying for leasing.

SCMi leasing is committed to the success of its clients, “Your Success Story Becomes Our

Success Story”.

(SEE SCMi LEASING APPLICATION ON PAGE 15)

Leasing Benefits • 24 hour approval

• No large cash outlay

• Access to competitive interest rates

• Manageable monthly payments

• Payments are tax deductable

• No liabilities on financial statements

• Won’t affect your bank line of credit




F C I




F C I

F

C

I

First Choice Industrial, LLC 145 Auburn Park Drive

Auburn, GA 30011

Phone: (678.642.9722) Email: Firstchoiceind.net Website: www.firstchoiceind.net

Visit our online showroom at . . . preownedwoodworkingmachinery.com

Notes:

Documents

First Choice Industrial,firstchoiceind.net/FirstChoiceIndustrialBrochure.pdf · First Choice Industrial, LLC First in customer satisfaction ... Superfici supplies complete lines and