Upload
erica-lindsey
View
245
Download
0
Embed Size (px)
Citation preview
8/20/2019 Fire Fighting Trucks
1/18
PRODUCT RANGE
CERTIFICATION
NAFFCO is ISO 9001 certified - one of the few companies in the
United Arab Emirates to have been awarded this prestigious certificate
for quality. In addition NAFFCO has been awarded LPCB certification from the
UK as well as Kite Mark approval against a wide range of NAFFCO products.
In addition NAFFCO fire extinguishers conform to the Marine Equipment Directive
under the International Covention for Safety of Life at Sea (SOLAS) 1974 and theUK Merchant Shipping (Marine Equipment) 1999 No. 1957.
ASSOCIATES
NAFFCO is authorized by the UAE Civil Defence Authorities to design and execute
turnkey projects for all types of Fire Protection Equipment and Systems.
ENDOR SEM ENT
The equipment manufactured by NAFFCO meets the NFPA, ICAO,
BS standard codes as audited and is certified by LPCB & BVQI.
NATIONAL FIRE FIGHTING M ANUFACTURING F ZCO
PO Box 17014, Dubai, United Arab EmiratesTel 971 4 881 5653, Fax 971 4 881 6229
Email: [email protected] .naffco.com
NATIONAL FIRE FIGHTING M ANUFACTURING F ZCO
PO Box 17014, Dubai, United Arab EmiratesTel 971 4 881 5653, Fax 971 4 881 6229
Email: [email protected] .naffco.com
Fire Pumps
FireExtinguishers
Valves & Hydrants
FireSuppression
Systems
Hoses & Couplings
Fire Doors
Reels & Cabinet
Fire Trucks
LPCBLPCB L
O S
S
P
R
E
V
E N
T I
O N
C E R T I F I C
A T
I O
N
B
O A
R D
UKASQUALITY
MANAGEMENT
007
ASSESSED TO ISO 9001:2000
®
130004130004
B R
I T I S H
A P P R O V A
L S F O R F
I R E
E Q U I P M
E N T
FP/2414FP/241400860086
8/20/2019 Fire Fighting Trucks
2/18
FireFighting
TrucksTrucks
8/20/2019 Fire Fighting Trucks
3/18
Recognized as one of the leading
manufacturers of Fire Fighting Trucks and
Fire Protection Systems in the Middle East,
NAFFCO brings an unparalleled level of
innovation, professionalism and quality to
the industry.
With over 25 years experience, our engineers
have designed, supplied, installed, tested and
commissioned a broad range of Fire FightingTrucks and Fire Protection Systems from initial
concept right through to final delivery.
Our facility meets the standards of NFPA
(National Fire Protection Association), ICAO
(International Civil Aviation Organization), CAP
(Civil Aviation Publications), and Civil Defence
& Local Authorities. In addition NAFFCO is an
ISO 9001 certified company by both BVQI and
LPCB.
NAFFCO is also associated with some of the
worlds leading blue chip suppliers such as
Mercedes Benz, Iveco, Man, Renault, GMC
and Nissan Diesel for Chassis. Godiva, W.S.
Darley and Waterous for pumps, and National
Foam, Fike, Central, Liffco and Chemguard for
systems & equipment.
NAFFCO manufactures all types of Fire
Fighting Trucks to customer’s exact standards
and specifications and provide full servicing,
maintenance and training options through aseparate dedicated fire truck maintenance
department.
We can also undertake annual and semi-annu-
al maintenance contracts, which will ensure
the smooth running of the equipment year on
year.
With our global Headquarters and Factory
located in Dubai, the NAFFCO client base
includes Governments, Oilfields, Industrial,
Private and Public sectors throughout the
Gulf and beyond.
8/20/2019 Fire Fighting Trucks
4/18
8/20/2019 Fire Fighting Trucks
5/18
f i r e t r u c k s
8/20/2019 Fire Fighting Trucks
6/18
The Attacker- Small Fire Fighting Vehicles
Model No. Capacity (l) Accessories HP Pump (lpm)
Water Foam NFS305 3000 300 Rescue Tools, 100 Kg DCP Trolley, 290 2500
Fire Men Suits, Breathing Apparatus
NFS405 4000 500 100 Kg DCP Trolley, Fire Men Suits, 290 2500 Breathing Apparatus
NFS500 5000 N/A Rescue Tools, 100 Kg DCP Trolley, 290 2500 Fire Men Suits, Breathing Apparatus
Power Generator
The Climber - 6x4/6x6 Multi-Purpose Medium Fire Fighting Vehicles
Model No. Capacity (l) DCP (kg) HP Pump (lpm) Drive
Water Foam NFM4055 4000 500 500 350 3500 6 x 4
NFM4057 5000 500 750 350 2500 6 x 4 NFM8010 8000 1000 1000 350 3000 6 x 6 NFM9015 9000 1000 1000 350 3500 6 x 6
The Carrier - Large Fire Fighting Vehicle
Model No. Capacity (l) HP Pump (lpm) Drive Additional
Water Foam NFL7010 7000 1000 350 3500 6 x 4 Rescue Equipment
NFL9010 9000 1000 350 3500 6 x 6 Rescue Equipment
NFL1210 12000 1000 350 4000 6 x 6 / 8 x 4 Rescue Equipment
The Protector – Airport Fire Fighting Vehicles
Model No. Capacity (l) HP Pump (lpm) Drive Additional
Water Foam NFL7010 7000 1000 350 3500 6 x 4 Rescue Equipment NFL9010 9000 1000 350 3500 6 x 6 Rescue Equipment NFL1210 12000 1000 350 4000 6 x 6 / 8 x 4 Rescue Equipment
• Built on a Mercedes Benz 4 x 2 double cabin with 290 Hp• Lightweight design and construction• highly maneuverable even when fully loaded with water, foam and rescue tools
and accessories
• The fire fighting vehicle of choice for most Civil Defense Authorities, refineriesand oil companies
• Perfectly adapted to both on and off-road conditions even when fully loaded• High capacity for water, foam and DCP combined with optimum storage space for
rescue equipment and related accessories• Three water outlets can be discharged instantaneously while maintaining
maximum pressure using the rooftop monitor• High pressure hose reel unit and up to four discharge hoses with various nozzle
configurations• With 400 Hp, and ABS break system, the Climber is well suited to both hill climbs
and descents while maintaining optimum control and high performance.
• High volume capacities for both water and foam• Designed to tow additional mobile loads
• The carrier can also be equipped with an electrical or hydraulic lifting winchwith heavy duty rescue tools and equipment.
• Specifically designed to operate on airport runways• Features high pressure water and foam applicators controlled via a remote
control system direct from drivers cabin and able to target hazardous substanceson the runway path
• In addition, a roof top monitor allows operator to target a fire up to 90 metersaway ensuring the safety of the Firemen and offering an excellent fire fightingcontrol mechanism.
The Attacker has been
specifically designed for fire
fighting in urban areas and
villages.
The Carrier is capable
of carrying high volumes of
water and foam in additionto heavy duty rescue tools
and accessories.
The Climber has been
specifically designed for fire
fighting in urban areas and
villages.
Able to withstand the
toughest on and off-road
conditions with high power engines
and featuring heavy
duty water, foam and DCP
system capacities.
8/20/2019 Fire Fighting Trucks
7/18
Adaptability The motor driven
set can be mountedor fixed on a Mobile
Platform.
RamSingle or Twin Ram forLifting or spreadingcollapsed units orframes.
CutterFor cutting through
fabricated steel and othermaterial of
various thickness.
SpreadersFor lifting heavy weightmaterial at low elevationlike trapped personalunder wreckage.
Motor
Electric or die-
VersatileA complete hoseassembly is pro-vided at various
lengths depending
on requirements.
Unique Warning Device
A unique patented pressurewarning device inside thedemand valve.
Four way valveAllows feeding asecond man orconnecting theB.A. to an airline.
BreathingApparatusCylinderVariableDuration of17-60 mins.Can befitted withone or twocylinderswithdiameterrange from110 to170mm.
BootsVulcanized
rubber upper/rubber sole,100% water
proof.CE EN345approved.
GlovesFire retardant,
seamless indexfinger for
enhanceddexterity &durability.
HelmetFiberglass outer shell is more resis-
tant to chemicals and more stable atextreme temperatures.
JacketFire retardant
fabric; fluorescenttape lining with
upper stripes foridentification.
TrousersFire retardantfabric; waterproofsteam-permeablemembraneSOFITEX 2000,warming upunwoven fabric,
with lining.
Full Facemask Panoramic full facepiece
fitted with preloaded exhalevalves.
BackplateAnatomically shapedbackplate ensuresbetter distributionof mass and remainssteady when crouch-ing or crawling.
GaugePhosphorescent gaugewith contrasted warn-
ing zone from60 to 0 Bar.
Ear Protectionfire resistant, heat anddust guard.
Breathing ApparatusSet to 30-45-60 Minutes
- International Standard Approvals
Fire Entry Suit As perNFPA Standard.
Applicable Standards -EN 469 EN 686 /89 , EN137,RINA, NFPA1981. 1997(NIOSH) Approval
8/20/2019 Fire Fighting Trucks
8/18
8/20/2019 Fire Fighting Trucks
9/18
Naffco manufacturing
facilities provide
unparalleled expertise
and our real strength
lies in the ability to
adapt to stringent client
specification and
delivery demands
by seamlessly
integrating chassis pro-
viders, lead-times and
specific client require-ments to ensure on
time deliver - time after
time.
8/20/2019 Fire Fighting Trucks
10/18
High pressurePump with water
Proof control-operation from
inside and out side
the Cabin
Hose reel and storage
compartment for fire
fighting accessories
with breathing
apparatus sliding racks
for easy access.
Top roof and bumper moni-
tors are available in two
configurations;
manual (as shown here),or automatic joystick drive
from inside the cabin or via
remote control box.
Search spot
Light with high illu-
mination power.
8/20/2019 Fire Fighting Trucks
11/18
8/20/2019 Fire Fighting Trucks
12/18
SERVING OVER
70 COUNTRIES INFIRE PROTECTIONWORLDWIDE
8/20/2019 Fire Fighting Trucks
13/18
RESCUE ACCESSORIES
Firemen Suit
• Fire Fighting Suit
• Fire Entry Suit
Thermo imaging Camera
• Searching device
Set of hydraulic and Manual rescue Tools
• Cutters –Spreaders
• Combi Tools
Lifting bags
• 5-70 Ton
Air compressor unit
• Electricity power Generator
• Electric insulation cutting Devices
• Acetylene cutting devices
Pulling device with a cable for manual rescue
Pulling and suspending Winch
Safety Harnesses
Portable Electric water and Foam pump
Diving suits and Equipment
Resuscitation device
Ventilator (smoke extract Equipment )
Gas detectors Devices
Breathing apparatus set
Rope ladder
• 30/50 Feet
Torches
• Lighting Mast
• Searching lights
Searching Devices
Sectional rescue ladder
Manual microphone
• Public addressable Megaphone
Jumping cushion
Stretcher
First aid kit
• 25/50 Person
Sterile burn kit
Rescue rope
• 30 mtrs ended by hook
Rubber Boat
Helmets
Multipurpose Gloves
Masks
Fire Fighting shoes
Jumping cushions
rescue vehic les
8/20/2019 Fire Fighting Trucks
14/18
8/20/2019 Fire Fighting Trucks
15/18
8/20/2019 Fire Fighting Trucks
16/18
a m b u l a n c e s
8/20/2019 Fire Fighting Trucks
17/18
m a n u f a c t u r i n g
8/20/2019 Fire Fighting Trucks
18/18
NAFFCO’s extensive experience of
fire fighting systems and applications
acquired over the last 25 years has been
instrumental in the establishment and
rapid development of the fire truck and
rescue
vehicle manufacturing division.
The division is supported by state-of-the-
art, technology and software – allowing
for
extensive research and development into
optimum configurations for max- imum space
utilization, engine power perfor- mance, on road
efficiency and
safety/security
features.
This powerful in-house resource
has enabled our
Engineers to
simulate designs
in both static
and dynamic
views while pay-
ing particular
attention to load
displacement to
ensure a reliable
vehicle both
on or off-road
depending on
the required
application.
Naffco has also
invested in addi-
tional manu-
facturing facul-
ties which form
an integral partof the
production
process.
The current NAFFCO
production line is able to
handle a broad range of fire
fighting and rescue vehicles
This is dummy copy
it is designed to
illustrate the size and
This is dummy
copy it is
designed to
illustrate the size
and position of
the text for thispanel.
This is dummy
copy it isdesigned to.