Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
FINISHES AND SPECIFICATION DOCUMENT
*Criteria for choosing supplier
• Appropriate grade of ware.
• Locally sourced product.
• Product made from natural material.
CARPETS
Code Specification
Product code
and color Image
FLR001
DESCRIPTION:
Broadloom carpet 3.70m wide, manufactured from 100% BCF
polypropylene, installed with no cross-joints and to be laid
directly onto substrate in accordance
with the SANS 10186 code of practice
Deem to comply specification: Textile carpet with broadloom
construction with SANS location grade U5 (Heavy commercial),
fire index class 3. All to comply with SANS 1375
Avance AC06
Colour: AC6c
Criteria for choosing supplier
• Technical pre-sale assistance in choosing correct application
• 15 year+ comprehensive product guarantee
• Availability of products
• Product ranges that extensively available over a long period of time
• Although Plascon is used below, Dulax paint also meets the criteria.
WALL PAINT
Code Specification
Product code
and color Image
WL001
SUPPLIER NAME: PLASCON
DESCRIPTION:
Surface to be dry, sound and clean and cured for a minimum of
14 days, with a moisture content measured with a dozer
hygrometer (or equivalent), of BD
2 scale- 8% or less. Prime with one coat Plascon Plaster Primer
(UC 56) with
an overcoating time of 16 hours and finish with two coats
Cashmere (CAS) with 2 hours drying time between coats, for a
maintenance cycle of 7 years in a C1 inland environment.
Deem to comply specification:
High quality washable acrylic Emulsion paint suitable for exterior
use to plastered wall to approval and complying with SANS
1586 and 103055. Applied to Manufactures specifications. Cashmere
Amazon Mist Y5-
E2-3
WL002 Accent color to be applied on one wall
Plascon
equivalent to
Pentone 172
Criteria for choosing supplier
• Choice of type of suspended ceiling depends on acoustic requirements of the space use
CEILING
Code Specification
Product code
and color Image
CEI
SUPPLIER NAME: LAFARGE
DESCRIPTION:
Gypsum lay-in grid ceiling system with 1200x 600 x12mm thick
square edged Jumbo Fissured vinyl ceiling tiles, laid on
15x38mm
high double stitched main tees at 1200mm centres and with
15x38mm high cross tees at 600mm centres with galvanised
exposed face all in colour white, including necessary grids,
locking
type end clips, fire expansion punch outs to main tees, etc.
suspended by 25 x 0,8mm galvanised strapping at not
exceeding
1200mm centers, Ceiling perimeter to be finished using 34
x40mm shadowline wall angle, all in accordance with SABISA
(South Africa Building Interior System Association) installation
guides.
Deem to comply Specification:
Mineral fibre 1200/600 x600 suspended removable ceiling
panels complying with SANS 637 White Fissured
BLINDS
* Criteria for choosing supplier:
• Locally sourced product.
• Availability of products.
• Product ranges that extensively available over a long period of time.
Code Specification
Product code
and color Image
BLI
DESCRIPTION:
Basswood 50mm blinds
Deem to comply Specification:
Indoor venetian blinds to SANS 947
Similar / Approved by architect / project manager Whitewash
LIGHTS
Lighting installations and the required lux levels must be installed by a professional Electrician by using the following guidelines:
• Make use of power saving light fixtures
• Use task lighting instead of general lighting.
Code Specification
Product code
and color Image
LIG
DESCRIPTION:
LED Fitting 600x600 with diffuser 3 lights
Osram LED Tube ST8V1.2MM 16W cool white.Cool white
WALL CABINETS
Code Specification
Product code
and color Image
CAB
DESCRIPTION:
Door: 16mm Thick chipboard laminated in melamine four-sided
Full wrap post form.
Hinges: Internal concealed Grass type and quality with
minimum 100 000 cycle test guarantee.
Handles: Pair on Union aluminum 587 Cedar pull handles size
111mm with
Anodized Silver finish, code AL587-111BTAS, bolt-through. LOCKS
on all door: CISA drawer and cupboard lock code 71550-20 23
12 including cylinder rose and key 01420, finishes in nickel plated
steel.
Deem to comply specification:
Steel furniture to SANS 757
Stain type powdered coated finish to SANS 1274
Dove grey doors
with white
carcass
• NOTES: Detail shopfitting drawings to be provided by the CSIR Interior Architect.
BATHROOMS
*Criteria for choosing supplier
• Appropriate grade of ware.
• Locally sourced product.
• Product made from natural material.
BATHROOM FLOORS
Code Specification
Product code
and color Image
BAF001
DESCRIPTION:
Full bodied double pressed porcelain tiles (NON-SLIP) complying
with SANS 1449/13006 fixed to floor screed with approved tile
adhesive mixed with bonding liquid in lieu of water joints ground
with tile ground with minimum 5mm expansion joints at
perimeter, all structural expansion and
construction joints and maximum 5m centres internally and at
3m centres externally, in both
directions All to manufacturers specifications.
Deem to comply specification:
Ceramic tiles to SANS 1449/13006
NOTES: Grout: Dove grey
Shade gray
without stone
finish.No beiges, terracotta’s
or sand colours
BATHROOM WALLS
Code Specification
Product code
and color Image
BAW01
DESCRIPTION:
Full bodied double pressed porcelain tiles (NON-SLIP) complying
with SANS 1449/13006 fixed to floor screed with approved tile
adhesive mixed with bonding liquid in lieu of water joints ground
with tile ground with minimum 5mm expansion joints at
perimeter, all structural expansion and construction joints and
maximum 5m centres internally and at 3m centres externally, in
both directions All to manufacturers specifications.
Deem to comply specification:
Ceramic tiles to SANS 1449/13006
NOTES: Grout: Dove grey or white
Similar / Approved by architect and project manager
Shade light gray
without stone
finish.
BAW02
Douglas Jones 435 - 48 x 48 mm Mesh Backed Slate Mosaic Tile -
Charcoal Black Colour - Code BAWMo1 . Fixed with Tal
adhesive and flush pointed with Tal jointing compound (All tiling
to be laid with 5mm maximum consistent joints between tiles)
laid and sealant to Manufacturer's specification
charcoal, grout
grey
VANITY SLAB & SANITARY FITTINGS
Code Specification
Product code
and color Image
VAN
30mm "macadamia eezi quartz" top with 450
Mitred joint, 2 –
3mm Bevel on surface edge, fixed to supports using dab of
100% clear silicone adhesive. Top to be Min 825mm wide x
870mm high above floor level, 300mm downstand to cover
service below vanity slab. White
BASW01
DESCRIPTION:
WC: Vaal Sanitaryware Entice vitreous china 90 degree outlet
back inlet wall hung closed rim pan colour White (Code:
439600WH) fixed on and including bolt-through-the wall bracket
(Code: 80844Z0) with concealed back inlet flushvalve (
elsewhere specified) and Themoplastic soft close seat.
Deem to comply Specification:
Ceramic water closet to SANS 497
white
Code Specification
Product code
and color Image
BASW02
DESCRIPTION:
Flush device: Geberit Kombifix concealed cistern for wall hung
WC (article no. 110.350.00.5), front actuated with Samba dual-
flush actuator (article no. 115.770.46.1) in chromium plated
“matt” finish, including flush pipe and pan connector, water
supply connection with angle stop valve, protection cover for
service opening and protection cover for flush pipe, fixed with
included fasting materials inside solid wall from 120mm up to
200mm. All with Geberit conditional guarantee.
Deem to comply Specification:
Flush valve to SANS 1240
Matt chrome
BASW03
DESCRIPTION:
Vaal Sanitaryware 415 x 275x 315mm Flatback white vitreous
china wall mounted urinal including 38mm chromium plated
domical grating (code: 8787Z0) and chromium plated top inlet
spreader (code:8543Z0).
Deem to comply Specification:
Ceramic urinal to SANS 497
white
Code Specification
Product code
and color Image
DESCRIPTION:
Geberit HyTouch Samba pneumatic urinal actuator (article no.
116.011.46.1) finishes in chromium-plated “matt” including
housing (article no. 116.001.00.1) with shut off valve, flush pipe
(article no 119.704.16.1), inlet set (article no. 152.489.16.1) and
urinal trap ( article no.
152.983.00.1).
Deem to comply Specification:
Ceramic urinal to SANS 1240
Matt chrome
BASW04
DESCRIPTION:
HWB: Ceramic wall mounted concealed waste slab basin with
tap ledge, colour White (Code: L87S), size 560 x460 x200mm with
one taphole, fixed to wall manufacturers specification and
sealed with abe Dow Corning acetoxy silicone sealant where
basin meets wall
Deem to comply Specification:
Ceramic wall mounted hand wash basin to SANS 497
White
BASW05
DESCRIPTION:
Cobra Watertech Karoo 15mm chrome plated single lever basin
mixer restricted to 6l/min maximum flow (Code: KO-951)
manufactured in accordance with SANS 1480:2005 BS EN
1286).
Deem to comply Specification:
Metal water tap to SANS 226
Polished chrome
Code Specification
Product code
and color Image
CUBICLE IRON MONGERY
DESCRIPTION:
DOR001 Door stop half-moon chrome Polished chrome
DOR002
Stainless steel brushed modern handle, back to back, bolt
through
Length: 300mm
Dimensions: 300mm x100mm
Diameter: 19mm
Stainless steel
ACCENT COLOR INSPIRATION