Upload
gusheenarora
View
968
Download
2
Embed Size (px)
Citation preview
Financial ManagementBMS 5th Sem July’11NM College
Syllabus
Section Details of Subject Lectures
I Introduction:
Meaning & Scope of Financial Management
Functions & Objectives of Financial Management
Changing Role of Financial Managers
Working Capital Management:
Definition-GWC & NWC (Explain Core Assets & Non Core Assets)
Components of Working Capital
Factors determining Working Capital
Receivables Management:
Meaning and Importance
Credit Policy Variables
Case Study on Credit Evaluation
Methods of Credit Evaluation
o Traditional and Numerical Credit Scoring
Monitoring the Debtors – Techniques
o DSO, Aging Schedule, Collection Matrix
Cash Management:
Motives of Holding Cash
Strategies of Cash Management
Cash Budget - Meaning and Objectives
Budgeting of Receipts and Payments – Trading, Non Trading & Capital
Preparation of monthly Budget and finding out Closing Cash Balance
(Excl. Financial Statements to be made from Working Capital Estimation)
14
II Cost of Capital And Capital Structure:
Types of Capital
Debt
Equity
12
Retained Earnings
Preference
Cost of Capital for Each Type of Capital
Weighted Coat of Capital
Marginal Cost of Capital (w.r.t Expansion)
Designing Capital Structure Alternatives
Types of Leverages (Combined,Operative,Financial)
III Capital Budgeting:
Introduction, Types of Capital, Sources of Capital
Evaluation of Capital Expenditure Proposal from Given Cash Flow,
Concept of Present Value
Techniques of Appraisal of Investment Proposal
Payback Period Method, Average Rate of Return Method
Net Present Value Method
Profitability Index Method
12
IV Business Restructuring:
Importance
Financial Implication
Valuation
Types of Business Restructuring:
Merger
Amalgamation
De-Merger
Other Restructurings
(Elementary Accounting Problems-Testing Fundamental Knowledge only)
Long Term and Short Term Sources of Finance:
Traditional and Modern Instruments of Finance Including Securitizations
12
Total Lectures 50
Financial management
Introduction:
Funds Management is of crucial importance for any venture. Financial Management concerns itself with acquisition of and optimum use of funds. For efficient operation of any business it is necessary that funds are available when needed and are put to effective use to obtain best results. Basically Financial Management ensures that funds are raised at most economic cost and are put to use in optimum way to yield best result. Financial Management plays a role in inflow, outflow and the distribution of funds.
The three fold decision management in Financial Management consist of
Investment decision
Financial decision and
Dividend decision
Investment decision would need Capital Budgeting to assess the funds involvement in investing capital into the venture.
Financial decision would consist of decision making in the mode of raising finance for the investment- by equity/ own funds; debt – borrowed funds or a combination of both. This woul depend on several factors like gestation period, profitability – to name a few.
Dividend decision would involve deliberation and decision as to the distribution of earnings by way of dividends or retention of earnings in the business or a combination of both.
Financial Functions :
Financial functions in an organisation would cover the following activities,
I. Process of acquisition of funds
II. Process of utilisation of funds
III. Technique of management of funds
IV. Partaking as integral part of management in decision making
V. Fore casting financial estimates of revenue and capital expenditure and income
VI. Financial planning and control
VII. Correlate with other functions of management
VIII. Dealing with budgeting, reporting and accounting
The Nature and Scope of Finance Management:
The Nature and Scope of Finance Management can be summarised as below:
Objective of the Organisation
Maximisation of Wealth
Investment Decisions Financial Decisions
Estimating Requirement of Funds
Project Selection Locating Sources of Funds
Assessment of Risk & Returns Optimise Capital Structure
Determining Cost of Capital Decision on Dividends
Working Capital Management
Lease / Hire Decisions
Merger and Acquisition
The financial decisions include assessment of fund requirement for the venture / project. After such assessment the various mix and match combination of sources that would best suit the project would be decided. The sources would be equity / preference Share Capital, Debentures, Bank Loans, Deposits from Public etc. Proper assessment of long and short herm finance requirements and debt equity ratio would enable arriving at a proper decision on suitable Capital Structure for the organisation.
Deployment of Funds in fixed assets and current assets is also important. Decision on investment into fixed assets would be taken by capital budgeting and investment in inventory would be made, considering production levels, optimum stock levels to ensure unhindered production without holding excess inventory, locking up funds.
Dividend decision would involve consideration of return on capital and retention of funds including issue of bonus shares. ESOP decisions would similarly be made regarding employee incentives.
Cash management would ensure that adequate cash is kept to meet the business requirements and excessive cash is invested profitably.
Regular submission and study of Management Information Reports would ensure periodical reviews for corrective action.
Constant efforts would be on to negotiate with Bankers, investors ,FIs and public by providing information on performance of the company and for raising funds at economic rates.
Finance Manager would be constantly aware as to the impact of stock markets on the company’s shares and take appropriate action.
Functions of Financial Manager:
Functions of Financial Manager can be broadly classified into executive financial functions and incidental financial functions.
A.Executive Financial Functions include,
1.Formation of Asset Management Policy: Formation of Asset Management Policy is an important function necessary for successful financial management. It is interlinked with functioning of other departments as well. The Asset Management Policy would include decisions on types and coverage of insurance of its assets. He has to ascertain how much of cash will be tied up in various non cash assets. This would involve the participation of other departments. Production department to decide its need for inventory of inputs, marketing to decide the inventory of finished products, Sales department to decide on terms of credit to customers, purchase department to negotiate for best credit terms etc.
2.Determining allocation of profits earned: Management should decide, based on its need for working capital asto distribution of Profit after taxes. This would be based on,
Payment of dividends to s hareholders. The dividend policy would influence the share price in the market.
Giving the employees ESOP as a measure of profit sharing plan. This would boost the loyalty of the employees.
Retain the earnings in the business to enable expansion of business.
3.Estimating requirement for funds and controlling cash flows:
It is an important duty of the finance manager to ensure timely availability of funds to ensure smooth flow of operations. At the same time holding idle surplus funds should be avoided as it affects profitability. The delicate balance between liquidity and profitability should be maintained. Holding of excess cash prevents alternate deployment of cash that would earn revenue. Inadequate cash balance, on the other hand would lead to delayed payments and affect the image of the company in the market.
4.Assessing the future needs and explore new sources of funding:
Assessing the future needs and explore new sources of funding would prevent any bottlenecks in smooth operations of the organisation. Finance manager should be able to forecast the needs of the management and explore the possibility of new sources of funding. Based on his assessment of how much funding would be required for how long a duration, he should als.o plan how it will be repaid. The additional funding could be by way of bank loans, debentures, acceptance of deposits and issue of fresh equity. He should be constantly on the look out for new sources of financing and negotiate for better terms of borrowing.
Finance manager, based on his assessment of the need for finance also plan whether finance should be borrowed for short term or long term.
5.Checking the performance of the company:
Finance Manager should be the watch dog on the performance of the company from profitability point of view. Higher production and larger sales will be of no purpose if they would result in losses. He should bring out Management Information Reports regularly and submit the same to management for discussion and corrective action in time to ensure efficient overall performance of the company.
B. Incidental Functions:
In addition to the executive functions stated above Finance Manager has to perform the incidental routine functions to eneble smooth functioning of the company. They are,
I. Supervision of cash receipts and payments and ensure safe custody of the cash balance.
II. Safe custody of the securities, insurance policies and other documents of value.
III. Taking care of the routine functions of Finance department.
IV. Record keeping and submission of periodical reports.
V. Assisting finance executives in performing their role.
The western perception of a Finance Manager’s function comprises of:
Provision of capital as required by the company
Active interaction and Investor Relations
Planning Short term financing needs
Taking care of banking and custodian functions
Taking care of Credit and receivables
Profitable investments
Adequate insurance at economic rates
Planning & control
Reporting and interpreting
Evaluation & Consulting
Tax administration
government Reporting
Protection of Assets and
Economic Appraisal
As stated earlier, wealth maximisation is the goal of any organisation and finance manager plays a key role in this activity. While in this context, students should clearly understand the distinction between profit and profitability. Profits on account of abnormal gains, or losses due to abnormal losses (Fire damages etc) will affect the profits for the period, but the profitability will not be affected by such abnormal gains or losses.
The goal of wealth maximisation is achieved by,
i. Maximising Sales/ Revenue/ Earnings
ii. Maximising Profit
iii. Maximising Return on Sales / Investments
iv. Maximising Corporate Wealth
v. Maximising Shareholder Value
vi. Maximising Social Wealth
vii. Enjoying public confidence , social acceptability and Recognition
Maximising Sales/ Revenue/ Earnings
Finance Manager would aim at maximising sales revenuewhich in turn would improve the Return on Investment.
Maximising Profit
All the management decisions, Investment decisions, finacing policy decisions and dividend policy decisions should aim towards maximising profit and any decision affecting profits adversely should be avoided.
Maximising Return on Sales / Investments
Finance Management should aim at maximisation of earnings by maximising the output at minimum input cost and maximise the return on sales. ROI should be maximised. This is achieved by maximising the return on sales.
Maximising Corporate Wealth
Maximising corporate wealth enhances the overall value of the organisation.
Maximising Shareholder Value
The prime objective of Finance Management is to maximise shareholder’s value. This is achieved by timely declaration of reasonable dividends and effective deployment of shareholder’s funds. This would increase the return of investment and enhance the confidence of the investors.
The role of a finance manager being important to management, it would look forward to the following qualities in a successful Finance Manager.
i. Good Personality: A Finance Manager should have a pleasing personality, physically with mental alertness and attitude.
ii. Intelligence: He should be having a sharp perception, analytical ability and intelligent and alert mind.
iii. Initiative: He should be self driven and act without awaiting / looking for guidance.
iv. Innovative: He should be creative, imaginative and have a mind for research.
v. Self Confidence: he should have leadership skill and capable of getting best out of teamwork.
vi. Communicative Skill: He should have communicative skill and be able to perceive the problems of his teammates and capable of helping to assist them solve their problems.
vii. Decision Making Skill: With his strong perception, analytical approach and skill, he should be capable of taking decision and responsibility.
viii. Honesty: He should be of unquestionable honesty , inculcating the same in his entire team.
ix. Administrative Skill: With his leadership skill, he should be able to lead, without dominating.
x. Discipline: With effective leadership, he should be an example of self discipline and be able to impose discipline in the organisation.
xi. Patience: He should not be hasty. With a mature mind, he should be open to the different views, before taking his decisions.
xii. Sound Knowledge: He should have a sound knowledge in his field and be constantly upgrading his knowledge with current developments in his area of functioning.
Finance Management and inter relationship with other departments:
purchase
Production
Marketing
Advertising
Financial Management Accounting
After Sales / Customer Care
Human Relations Department
Research & Development
Financial Management is not an isolated function. It is integrated with almost all other important functions required to achieve the main objective of the company. The most important of them being,
Co-ordination with Production Function:
Production function should closely co-ordinate with Finance to determine the optimum mix of the products to be made. This would, apart from the market demand and other factors, would depend on , profit margin of the product, feasibility of production, need for additional capacity to be invested and turnover cycle of production to profit. PERT reviews should be regularly discussed with production department for possible improvement in production process.
Co-ordination with Purchase Function:
Finance department should coordinate with purchase department to determine the raw material requirements, which is of prime importance. This would be a major demand on working capital. Size of inventory required, frequency of the orders, determination of minimum, maximum level of stocks, their storage, seasonal availability, terms of purchase, size of the orders and a variety of factors should be considered before planning the funds requirements for purchases. Best credit terms should be selected as it would ease strain on liquidity.
Co-ordination with Marketing Function:
Finance Managers should involve in creative discussion with various departments with over all objective of the company and suggest methods to the departments, which would be driven by their departments efficiency and goal achievement. In particular constant interaction with marketing function which would need finance for
I. Market research activities
II. Salary and incentives to the sales staff and field workers
III. Incentives and commission for dealers to remain competitive to rivals
IV. Recruitment of staff in marketing
V. Training of sales staff / dealers in promoting their marketing skills
VI. Development of new product
VII. Improving sales ,contributing to increased inflow of funds
VIII. Advertising in media – audio & visual
IX. Sales promotion and exploring potential areas for sales
X. Sample distribution and improvement of sales network
XI. Test marketing of new products/ in new areas
XII. Improve the packaging
XIII. Creation of Brand Image
Co-ordination with H R D Function:
Co-ordination with H R D Function is needed to interact and meet their requirement of finance for
I. Select and recruit competent staff
II. Training and development of employees
III. Retention of competent staff
IV. Payment of salaries and wages
V. Payment of bonus, perquisites like medical, LTA, accommodation, club membership etc.
VI. Providing an organised increment scheme to employees at all levels
VII. Providing welfare measures
Co-ordination with Research & Development Function:
Co-ordination with Research & Development Function is needed to interact and meet their requirement of finance for
I. New (and existing) Product development and design development
II. Market research activities to assess market share of the product and explore new areas of expansion
III. Innovations
The aim of the Financial Management should always be to clearly focus on optimisation of Shareholder’s wealth by increasing earnings per share, dividend per share and getting the best market price per share. As in the case of any business undertaking the motive should be to optimise the revenue at the least possible cost.
Co-ordination with AdvertisementFunction:
Co-ordination with AdvertisementFunction is needed to interact and meet their requirement of finance for
I. Media planning
II. Advertisement research
III. Penetration of new areas with advertising
IV. Improve ‘Brand Recall Image’ of the product through visual media
V. Conducting demos and roadshows
VI. Projecting a ‘consumer friendly image of the company
Co-ordination with Accounting and Finance Department Function:
Co-ordination with Accounting and Finance Department Function is needed to interact and meet their requirement of finance for
I. Payment of salaries
II. Provision of automated equipments like computers to facilitate easy and efficient Data Processing System
III. Installation of finance and accounting software relevant to the business
IV. Training the staff in up to date relevant skills for efficient performance
Co-ordination with After Sales Service:
Co-ordination with After Sales Service activities is needed to ensure customer confidence and goodwill as a satisfied customer would eventually be the spokesman of the company’s product and be an effective means for sales promotion. Finance would be needed for
I. Free door to door delivery, installation and training on use of the product.
II. Setting up grievance cell
III. Institute a system of regular customer feed back
The finance manager should assist the management to start with optimisation of earnings (Profits) and move over to optimisation of wealth. He is reportable to the General Manager with CEO/Managing Director and the Board with Share holders as the ultimate authority to be accountable to.
Equity Vs Debt Mix:
An intelligent mix of debt and equity mix could dramatically increase the Return on Investment for the investor.Consider, for example the following two methods of investment for a company:
Sources of Finance
Source of Funding
Situation
Option #1 Option #2
` `
Equity Share Capital
10% Preference Share Capital
Loans & Debentures @ 12%
Total Capital Employed
Net Profit Before Interest & Tax
2000000
-
-
400000
600000
1000000
2000000 2000000
600000 600000
In the first case the entire capital is raised by issue of equity shares. In the second case, 20% of the fundsare raised by equity capital, 30% by way of preference shares and remaining 50% raised from debt funding by way of loans and debentures bearing 10% interest per annum. The impact of the two options on Return to Investors (Equity Share Holders) would vary considerably as shown below:
Return on Equity
Particulars
Situation
Option #1 Option #2
` `
Net Profit Before Interest Tax
Interest on Loans & Debentures
Net Profit Before Tax
Income Tax (With Edu. Cess) @30.9%
Net Profit After Tax
Preference Share Dividend @10%
Funds for Equity Share Holders
Return on Investment (Equity Share Holders)
600000
-
600000
120000
600000
185400
414600
480000
148320
331680
- 60000
414600
20.7%
271680
67.9%
In the first situation the ROI is (414600 / 2000000) 20.7%.
In the second situation the ROI is (271689 / 400000) 67.9%.
The ROI is much more in second situation with lesser equity base. The option of Debt:Equity mix however would depend on several factors.
Role of a Finance Manager in India:
As against the role of Finance Manager in traditional days, when it was confined to raising of funds and managing the documentation formalities it has assumed increased dimensions in the present times. A modern day finance manager is concerned not only with raising of funds, but is equally concerned with the deployment of funds and managing it to optimise the wealth of the shareholders.
In the light of globalisation and international players entering the fray, the current day finance manager should be alert to competition and live up to the expectation of the organisation in optimising profitability and wealth amidst competition. The important changes in current day business making the task of finance managers more challenging are,
I. The advent of liberalisation of economy
II. Free pricing of securities through book building route allowed by SEBI.
III. Introduction of FEMA replacing draconian FERA.
IV. MRTP Act replaced by Competition Act
V. Freedom to companies to determine Face Value of their securities
VI. Changes in SEBI in Capital Markets
VII. Convertibility of Indian Rupee
VIII. Liberalising the regulation on FDI
IX. Relaxation of Interest rate restrictions
X. Rupee becoming a stronger currency
The current day finance manager should also be aware of various risks confronted by business to enable and equip himself with risk management measures.
I. Credit Risk
II. Interest Rate Risk
III. Business Risk
IV. Inflation Risk
V. Industry Risk (Example: Jute packaging)
VI. Liquidity Risk
VII. Systematic / Unsystematic Risk
VIII.
Working Capital Management
What Does Working Capital Management Mean?
Working Capital Management is a managerial accounting strategy focusing on keeping efficient levels of both components of working capital, current assets and current liabilities, in respect to each other. Working capital management ensures a company has sufficient cash flow in order to meet its short-term debt obligations and operating expenses. Implementing an effective working capital management system is an excellent way for many companies to improve their earnings. The two main aspects of working capital management are ratio analysis and management of individual components of working capital.
Working Capital refers to that part of the firm’s capital, which is required for financing short-term or current assets such a cash marketable securities, debtors and inventories. Funds thus, invested in current assets keep revolving fast and are constantly converted into cash and this cash flow out again in exchange for other current assets. Working Capital is also known as revolving or circulating capital or short-term capital.
Working Capital is of several types1. Gross working capital
Total or gross working capital is that working capital which is used for all the current assets. Total value of current assets will equal to gross working capital. In simple words, it is total cash and cash equivalent on hand. But remember, we do not account of current liabilities in gross working capital. (EG:Stocks of Raw Materials, WIP, Finished Goods, Receivables, Prepaid Expenses, Accrued income, Advances paid, cash and bank balances).
2. Net Working Capital
Net working capital is the excess of current assets over current liabilities.
Net Working Capital = Total Current Assets – Total Current Liabilities
This amount shows that if we deduct total current liabilities from total current assets, then balance amount can be used for repayment of long term debts at any time. It also measure of both a company's efficiency and its short-term financial health.
When current assets are more than the current liabilities, working capital is positive. If current liabilities are more than the current assets, working capital is negative.
When current assets are equal to current liabilities, it is a ‘zero working capital’.3. Permanent Working Capital
Permanent working capital is that amount of capital which must be in cash or current assets for continuing the activities of business. It also shows the minimum amount of all current assets that is required at all times to ensure a minimum level of uninterrupted business operations.Permanent working capital is of two types: Initial Working Capital and Regular Working Capital. Initial Working Capital is the working capital required at the time of inception of the company. Initially, credit facility from bank and creditors may be difficult to come by. Initial Working Capital is required to prime the process of production until the regular activities start generating cash.
Regular Working Capital refers to the excess of current assets over current liabilities which keeps the business running.
4. Temporary Working Capital
Sometime, it may possible that we have to pay fixed liabilities, at that time we need working capital which is more than permanent working capital, then this excess amount will be temporary working capital. In normal working of business, we don’t need such capital.
5. Variable Working Capital
a. Seasonal Working Capital: Sometimes, the need for working cpital increases during certain periods / seasons of the year due to the nature of the business – Fruit juice extraction plants, food processing industry etc. During peak season more working capital will be needed and during off season, lesser working capita would be required. E.g Service Industries like tourism and travel, school reopening, monsoon etc.
b. Special Working Capital: To meet unforeseen eventualities like fire, storm, strikes etc, a company may need a temporary additional working capital to tide over the emergency for smooth continuity of operations. This is termed as Special Working Capital.
c. Peak Working Capital: The requirements of working capital may not be uniform theoughout the year. It may hit the peak during the year in some months when seasonal supply of materials (harvest time etc) , seasonal demand ( School uniforms, books, summer sales of cool drinks , warm clothings, construction activities, sale of Air conditioners etc.) will call for increased working capital needs.
Working capital as shown in the balance sheet on two financial years may not show the movement of working capital during the period. The movement of funds or funds flow will not be known from these figures. To know the movement of working capital is necessary as this alone will enable the Financial Manager to know when working capital need would be at its peak and when it would be slack. This knowledge would empower him to use surplus funds effectively.
These are known as balance sheet concept and operating cycle concept of working capital management.
I. Balance sheet concept
There are two interpretations of working capital under the balance sheet concept.
a. Excess of current assets over current liabilities (Net working capital)
b. Gross or total current assets.
The definition is meaningful only as an indication of the firm’s current solvency in repaying its
creditors. When firms speak of shortage of working capital they in fact possibly imply scarcity
of cash resources.
II. Operating cycle concept
A company’s operating cycle typically consists of three primary activities:
1. Purchasing resources :The firm has to maintain cash balance to pay the
bills as they come due Producing the product .
2. Inventory of Materials: In addition, the company must invest in
inventories to fill customer orders promptly distributing (selling) the
product.
3. Receivables Management : The company invests in accounts receivable
to extend credit to customers.
Operating cycle is equal to the length of inventory and receivable conversion periods.
The period of operating cycle would be the duration taken to convert the cash investments
(cash outflows) in material, labour and receivables (to mention a few) to cash inflows by way
of sales and other revenue. The lesser the period of such conversion, shorter the operating
cycle and more efficient the working capital management. The working capital turnaround
should be as fast as possible.
The operating cycle can briefly be summarised as below:
Cash on hand
Raw materials
Work in progress (inclusive of inputs of production cost)
Finished Goods (Conversion to Products ready for sale)
Receivables (in respect of credit sales
Cash on hand
The working capital funds are used for production and sales and after collection of receivables
get converted to funds again. The more often this cycle is completed, the more is the revenue
for the company.
The operating Cycle follows the following sequence:
Cash input is converted to raw materials
Raw material is converted to work in progress
Work in progress is converted to finished goods
Sale of finished goods to the extent of cash sales, releases funds immediately. Credit sales
generates receivables.
Receivables on collection becomes cash.
The operating Cycle (O C)is calculated as follows:
I. Initial capital input as Advance Money
II. Raw Material Inventory Holding Period
III. Work in Progress
IV. Finished Goods
V. Debtors
VI. Creditors
Formula for computing Operating Cycle: OC = A + R + W + F +D – C
Where OC is the period of the operating cycle.
A is the advance paid for purchases of Raw Materials
R is the period of holding the raw materials
W is the Work in Prigress duration
F is the period of holding the finished Goods
D is the Credit period to Debtors
C is the Credit period to Creditors
Number of Operating cycles in an year will be equal to 365 divided by duration of each
Operating Cycle.
Advance Working Capital Requirement will be = Total operating cost / Nr. Of Operating Cycles
in the year.
Factors Determining of Working Capital Needs:
1. Nature of Business: Service industries in general need lesser working capital
than manufacturing industries as their working capital turnover is several times
faster. Operating cycles in a financial year is more in service companies than
manufacturing companies as they do not hold huge amounts of inventory of Raw
Materials, WIP or finished goods. Merchandising businesses will carry even a higher
inventory than manufacturing industry and would need more working capital. They
will, generally having a larger Receivables too. Heavy industries, industries of
producer goods will have a working capital in lesser proportion to its Fixed capital
than industries manufacturing consumer products. Consumer durables in comparison
with FMCGs have a larger working Capital need and have a slower turnaround as
compared to FMCGs.
2. Scale of operations: A large scale chain of departmental stores will need a
larger working capital requirement than single unit supermarkets as their inventory
volume is spread over several units and locks up more working capital in inventories.
3. Production Time: Time consumed in manufacture of a product and its demand
would also influence the requirement of working capital. Faster the production and
more the sales, lesser will be the need for working capital with a faster Operating
cycle.
4. Purchase of raw materials: The nature of raw material purchase would
significantly affect the requirement of working capital. If the raw materials are
seasonal (Fruits, vegetables etc. For food processing industry), Grains during harvest
at competitive rates, scarce materials / materials in high demand, Controlled
materials etc would considerably affect the working capital requirements. Perishable
would need frequent purchase of smaller lots and may call for lesser Working Capital
with quicker turnover.
5. Manufacturing Process & Cost: If the special nature of manufacture is time
consuming and / or the cost of manufacture is high, working capital needs would be
more.
6. Working Capital turnover:
7. Manufacturing cycle: It starts with the purchase and use of raw materials and
completes with the production of finished goods. Longer the manufacturing cycle larger will
be the WC requirement; this is seen mostly in the industrial products.
8. Business fluctuation: When there is an upward swing in the economy, sales will
increase also the firm’s investment in inventories and book debts will also increase, thus it
will increase the WC requirement of the firm and vice-versa.
9. Production policy: To maintain an efficient level of production the firm’s may resort
to normal production even during the slack season. This will lead to excess production and
hence the funds will be blocked in form of inventories for a long time, hence provisions
should be made accordingly. Since the cost and risk of maintaining a constant production is
high during the slack season some firm’s may resort to producing various products to solve
their capital problems. If they do not, then they require high WC.
10. Firm’s Credit Policy: If the firm has a liberal credit policy its funds will remain
blocked for a long time in form of debtors and vice-versa. Normally industrial goods
manufacturing will have a liberal credit policy, whereas dealers of consumer goods will a
tight credit policy.
11. Availability of Credit: If the firm gets credit on liberal terms it will require less WC
since it can always pay its creditors later and vice-versa.
12. Growth and Expansion Activities: It is difficult precisely to determine the
relationship between volume of sales and need for WC. The need for WC does not follow
the growth but precedes it. Hence, if the firm is planning to increase its business activities,
it needs to plan its WC requirements during the growth period.
13. Inflation: During Inflation, cost of inputs (Men, Material & Overheads) would be higher,
resulting in more demand for Working Capital.
14. Profit Margin and Profit Appropriation: A high net profit margin contributes
towards the WC pool. Also, tax liability is unavoidable and hence provision for its payment
must be made in the WC plan, otherwise it may impose a strain on the WC.
15. Retained Earnings: Also if the firm’s policy is to retain the profits it will increase their
WC, and if they decide to pay their dividends it will weaken their WC position, as the cash
will flow out. However this can be avoided by declaring bonus shares out of past profits.
This will help the firm to maintain a good image and also not part with the money
immediately, thus not affecting the WC position.
16. Depreciation policy of the firm, through its effect on tax liability and retained
earning, has an influence on the WC. The firm may charge a high rate of depreciation,
which will reduce the tax payable and also retain more cash, as the cash does not
flow out. If the dividend policy is linked with net profits, the firm can pay fewer
dividends by providing more depreciation. Thus depreciation is an indirect way of
retaining profits and preserving the firms WC position.
17. Change in technology: The working capital requirements will vary with change
in technology as well. It could be in the following manner:
Labour oriented technology will be costlier, with higher wage bill, than mechanical
process.
Improved technology resulting in reduced machine time in manufacture would again
reduce the working capital needs.
18. Government Policies and Regulations: Government’s change in Income Tax Policy,
increasing taxation rates would reduce the retained earnings and increase the
Working Capital requirements. So will be the impact of any tariff, taxes or levies
introduces on the working capital.
Negative Working Capital (or changes)
Can the change in non-cash working capital be negative? When current liabilities exceed the
current assets, working capital turns negative.This can be avoided by efficient management of
working capital by optimising inventory, receivales and credit terms. Working capital could also be
reduced as a deliberate strategy of an efficient finance management. Once working capital is being
managed efficiently, the working capital changes from year to year can be estimated using working
capital as a percent of revenues. For example, consider a firm that has non-cash working capital
that represent 10% of revenues and that you believe that better management of working capital
could reduce this to 6% of revenues.
Valuation of components of Working Capital:
A.CURRENT ASSETS:
I. Raw Materials: Raw Materials are valued at cost.
II. Work in Progress: Work in Progress is to be valued at the given % of Raw Materials,Labour and Overheads. If no specific % is given, Raw Material Cost is taken at 100% and labour and overhead @ 50%
III. Finished Goods: Finished Goods are valued at cost price.
IV. Receivables: Sundry Debtors are valued at cost of goods sold to them. This is based on ‘Conservative Approach’ of not accounting of profit until the debt is recovered. However some value Receivables at sale price. This would mean that unrealised profit is included, which is not a conservative approach. Finished goods and Receivables should be valued at cost price.
V. Others: Advances paid, prepaid expenses, Income received in advance, cash and bank balances are taken at actual value.
B.CURRENT LIABILITIES:
I. Trade Creditors: Trade Creditors are valued at actual cost of purchases.
II. Bank Overdraft: Valued at actuals.
III. Outstanding Wages/ expenses: Valued at actuals.
Outstanding liability for Wages are calculated as below:
Wages accrue for every 15 days (2 Weeks).
1st of the month 15th of the month End of the month
Prepaid On due date outstanding
If wages of a month (say January) are paid at the end of the month, they are outstanding for
half month.
If wages of a month (say January) are paid at the beginning of the month, they are prepaid for
half month.
If wages of a month (say January) are paid on 15th of the month, they are neither outstan-
ding nor prepaid.
If wages of a month (say January) are paid on 10th of the next month (on 10th February), they
are outstanding for 5/6 of the month..
= 15/30 + 10/30 = 25/30 = 5/6 month.
If wages of a month (say January) are paid on 15th of the month, they are outstanding for
(5/30 = 1/6) 1/6 of a month.
This formula should be applied for calculating outstanding wages, where required.
Maximum permissible bank finance:
For calculating Maximum permissible bank finance a committee headed by Shri P.L.Tandon,
then Chairman of Punjab National Bank was appointed in 1974. This was followed by Chore
Committee in 1979. The committees recommended 3 methods for ascertaining Maximum
Permissible Bank Finance (MPBF). In the third method it was suggested that Core Current
Assets i.e. permanent current assets (that means bare minimum level of raw material, work in
progress, finished goods and stores to keep the manufacturing process going on) should be
financed from long term funds.
Tandon Committee Report on Working Capital:
Tandon committee recommended that the creditworthiness of the business enterprise needing
finance should be analysed. Based on the study the enterprise should be classified as per the risk
perceived into three types – Borrowers with low risk coverage, Borrowers of medium risk coverage
and Borrowers of high risk coverage.
The permissible borrowing limits should be fixed as under:
Borrowers with low risk coverage
MPBF = 0.75( CA – CL)
Maximum Permissible Bank Finance in such cases should be upto 75% of net current Assets i.e
(Current Assets – Current Liabilities)
Borrowers of medium risk coverage
Maximum Permissible Bank Finance in such cases should be upto 75% of current Assets less
Current Liabilities (0,75 x Current Assets) – Current Liabilities.
Borrowers of high risk coverage
Maximum Permissible Bank Finance in such cases should be upto 75% of (current Assets less Core
Current Assets) - Current Liabilities .
NOTE:
CA = Current Assets
CL = Current Liabilities excluding Bank OD
CCA = Core Current Assets. Core Current Assets are those minimum current Assets which are
always required in the business to keep it going.
RECEIVABLES MANAGEMENT
Book Debts are debts in respect of dues receivable from Trade debtors in respect of credit
sales. Receivables denote the funds locked up in credit sales of a business. Credit Sales and
therefore receivables are unavoidable in a running business. It carries with it the risk of
uncollectable or Doubtful Debts as well. This is a crucial area requiring the attention of the
Financial Manager , calling for constant monitoring and corrective action.
Receivables have costs attached to it. They are,
Cost of Collection: Follow up of the debts until they are settled involve inherent administrative
costs. Even good debts involve cost of follow up and collection of the same on due dates. In
addition to book keeping costs they may involve man hours and travel cost in follow up of
debts.
Cost of Capital: receivables lock up a part of working capital and therefore funds not available
for production. So it results in cost for additional funds to replace the funds lost in the form of
receivables with cost of raising such funds.
Cost of delinquency: Debtors may fail to pay on the due dates. This would extend the period
of the funds locked in the form of such book debts, further increasing the cost of replacement
working capital. It may also entail additional expenses such as legal costs and intensified
collection efforts. This increases the overall cost.
Cost of Default: Some customers may express their inability to service their debts, in which
case it becomes a doubtful debt and ultimately, bad debt. These unrealised bad debts are a
drain on profits.
A system must be in place to track accounts receivables. This will include balance forwards, listing of all open invoices, and generation of monthly statements to customers. An ageing of receivables will be used to collect overdue accounts enabling the Finance Manager to expedite collection measures. Measurement is another component within account receivable management. Traditional ratios, such as turnover will measure how many times you were able to convert receivables over into cash.
Objectives of Management of Receivables:
a) To lay down a clear credit policy and communicate it to all concerned departments, in
particular - the Sales Department as it generates the Receivables, the collection
Department that follows up the dues. The customers buying on credit should be also
clearly aware of the credit policy of the company.
b) Establishment of a clear system of management of creation of receivables, presenting
the Receivables and collection of the dues.
c) Creating a machinery to evaluate the creditworthiness of the customers and setting
the credit limits.
d) Ensuring prompt raising and submission of invoices.
e) Maintenance of updated accounts of the receivables.
f) Initiate action for collection of overdues.
Credit Analysis of Customers:
I. Traditionally, customers credit is analysed on ‘5 C’s principle. This is explained
separately.
II. Financial Statements may be asked to be submitted by customer. Analysis of such
statements would give an idea of solvency, liquidity and capacity of the customer to
pay.
III. Bank References may be asked for from the customer. This would give a clear picture
of creditworthiness of the customer.
IV. Visit to the customer may give a firsthand idea of the customer’s business and give a
fair idea of the creditworthiness of the customer.
V. Trade Reference ; enquiry in the trade about the customer would provide a general
idea of the creditworthiness of the customer.
VI. Bank Guarantee/ Third Party Guarantee: Getting a Bank Guarantee or a third party
guarantee in respect of first time customers would ensure payment of dues in time.
VII. Credit bureaus can provide services on credit rating of the customer giving a reliable
information on the creditworthiness of the customer.
Method of collection of debts:
Debts can be collected by various means,
I. By centralised / decentralised collection system
II. Pay Orders/ Bank Drafts
III. Post Dated Cheques
IV. Bills of exchange
V. Letters of Credit opened in company’s favour
VI. Staff deputed for debt collection
VII. Outsourced Debt Collection Agency
VIII. Factoring
IX. Del Credre Agents and other agencies.
Control of Receivables:
Account Receivables are generally measured and controlled in three ways,
A.Expressing debts in terms of number of days sales.
= Days Sales Outstanding = Accounts Receivable
Avg. Daily Sales
Any increase in Days Sales Outstanding would call for immediate attention and corrective action.
B.Ageing Schedule: Preparation of ageing schedule of debtors, classifying them into
different periods (say 30 days, 60 days and 90 days) would highlight the impact on how long
the debt has been due, locking up the funds of the company, calling for immediate corrective
action.
C.‘ABC’ analysis of Book Debts: This is an effective approach in control of inventory and
Receivables. The debts are categorised into three heads, where,
Few customers forming a major proportion of debts are categorised as ‘A’ type.
Customers of moderate amounts due are categorised as ‘B’ type and
Large number of customers owing small amounts are categorised as ‘C’ type.
Obviously concentration on ‘A’ type would help clear a major part of receivables instead of
sparing equal efforts on all debtors irrespective of amount due by them.
Customers Credit Analysis on ‘5 C’s Principle:
Traditionally, customers credit is analysed on ‘5 C’s principle.
Character: Credit Character can be assessed by study of the customer’s income, pattern of
payments to meet his obligations, profitability of his business and his general reputation in
the market.
Capacity: The earning capacity of the customer will provide a fair idea of his credit
worthiness.
Capital: The worth of the customer can be assessed with his tangible assets, profits/ earnings
from various sources and the properties he may own.
Collateral: What the customer can offer by way of security to fall back in case of delay in
payment would also give a fair idea about his credit worthiness.
Conditions: The general condition of economy, the particular condition of the business the
customer is into and other relevant factors would provide a fair idea of his credit worthiness.
Credit appraisal of customers:
These factors help the company to analyse the custmers’ credit worthiness. Analyse the
custmers’ credit worthiness is necessary to determine the ‘Credit Risk’ on account of
customers failure to pay.
CRISIL, ICRA Limited and Credit Analysis & Research Ltd. (CARE) are few of the credit rating agencies in India.
Credit worthiness report is prepared, based on the data obtained from,
I. Competitors, neighbours of the customer and the marketing representatives.
II. Customer’s Bank, where he keeps his account and avails of the facilities.
III. Accounts of the customer and evaluation of his assets.
IV. Information gathered from other suppliers to the customer, guarantor or other
creditors.
Based on the information obtained the customers are graded into the following categories:
AAA+ Prime Category 90% +
AAA Excellent 80% to less than 90%
AA Good 60% to less than 80%
A Satisfactory 40% to less than 60%
B Risk Prone Below 40%
C High Risk Doubtful Assets
D Very High Risk Low Assets
Customers could also be classified as:
AAA 50 points and above
AA 40 to 49 points
A 30 to 39 points
B Below 30
After the assessment is done decision is made as to whether to extend credit and if
extended limits up to which credit could be extended.
Present customers and new customers are treated on different levels. The present
customers can be studied on the basis of their present payment record where as new
customers are unknown factors and are to be treated with caution.
Such credit reviews are to be done periodically and records updated.
Del Credre Agent: A del credere (Italian for belief or trust) agent, is one who, selling goods for
his principal on credit, undertakes for an additional commission to sell only to persons who are
absolutely solvent. His position is thus that of a surety who is liable to his principal should
the vendee make default.
The agreement between him and his principal need not be reduced to or evidenced by writing, for
his undertaking is not a guarantee within the Statute of Frauds. A Del Credere Agent is an agent
who not only establishes a privity of contract between his principal and the third party, but who
also guarantees to his principal the due performance of the contract by the third party. He is liable,
however, only when the third party fails to carry out his contract, e.g., by insolvency. He is not
liable to his principal if the third party refuses to carry out his contract for example, if the buyer
refuses to take delivery.
For assumption of Credit risk, the del credre agents are given extra commission called del
credre commission over and above the normal commission on sales.
Opportunity cost :Opportunity cost is the cost of any activity measured in terms of the best
alternative forgone. It is the sacrifice related to the second best choice available to someone
who has picked among several mutually exclusive choices.
It is a key concept in economics.
I. It has been described as expressing "the basic relationship between scarcity and
choice.
II. The notion of opportunity cost plays a crucial part in ensuring that scarce resources
are used efficiently.
III. Thus, opportunity costs are not restricted to monetary or financial costs: the real
cost of output forgone, lost time, pleasure or any other benefit that
provides utility should also be considered opportunity costs.
Account receivables represents capital locked up which could have been put to alternate use.
The alternate cost of this is expressed as opportunity cost.
2007 Subprime Mortgage Crisis in US:
Indian economy is driven by savings and investments as against US economy , driven by
spending than earning. Their excess of spending over earning is financed by Banks and
Finance Companies. Home loan banking is very active in US economy. Home loans are
generally given to customers of ‘Prime’ category’ based on their creditworthiness. These
loans were later sold by the banks to SPV – Special Prime Vehicle created for this purpose.
SPV issued Collateral Debt Instruments to investors and collected money from the investors.
This money was given to banks as a consideration for purchasing the loan amount. This
helped the banks in two ways,
The liquidity of the banks improved
The banks were relieved of the burden of following up instalments and recovery of
mortgage loans as they were already sold.
The banks , flush with funds gave further loans to second level borrowers whose credit
worthiness was less than the borrowers of ‘Prime’ category. The loans were thus made to
‘Sub- Prime’ category of borrowers. Because of the higher risk, they were charged higher rate
of interest.
Again the loans were sold to SPV through ‘securitization’ and again SPV issued collateral debt
instruments to investors who invested in these instruments. These investments were to be
paid as and when future instalments were recovered. This process went on and on.....
The bubble burst when borrowers of home loans started defaulting in repayments of the
instalments. SPV in turn could not redeem their securities with their investors. On the sideline,
the insurance companies that had covered the assurance for CDIs (Collateral Debt
Instruments) could not bear the staggering claims due to defaults by borrowers and had
started defaulting in their commitments to honour the risk. The chain reaction of Sub Prime
borrowers default to SPV, SPV turning to Insurance companies, who had defaulted to meet
their claims, leading to default in redemption of CDIs (Collateral Debt Instruments) to
investors.
This led to the US Sub Prime Crisis, triggered by Home Loan repayment defaults by Sub
Prime borrowers.
This would drive home the importance of Receivables control and Receivables Management.
Method of Evaluation of Alternate Credit Policies:A.If Variable & Fixed Costs are given
Credit Policy
Period of Credit (Days/Months)
Present
Policy
Option
(I)
Option
(II)
Option
(III)
Particulars ` ` ` `
Sales
Less Variable Cost (i)
Contribution
Less Fixed Cost (ii)
Profit – A
Total Cost : (i) + (ii)
Avg Investment in Receivables
(Based on total cost)
Cost of extending Credit:
i.__%Opportunity Cost of Capital
(calculated on Avg Investment in
Receivables)
ii.Bad Debts (as % of Sales)
iii.Credit Collection & Admin Cost
Total Cost of extending Credit –B
Net Benefit (A-B)
Incremental Net Benefit
Method of Evaluation of Alternate Credit Policies:B.If Only Variable Cost is given
Credit Policy
Period of Credit (Days/Months)
Present
Policy
Option
(I)
Option
(II)
Option
(III)
Particulars ` ` ` `
Sales
Less Variable Cost (i)
Profit – A
Avg Investment in Receivables
(Based on Sales)
Cost of extending Credit:
i.__%Opportunity Cost of Capital
(calculated on Avg Investment in
Receivables)
ii.Bad Debts (as % of Sales)
iii.Credit Collection & Admin Cost
Total Cost of extending Credit –B
Net Benefit (A-B)
Incremental Net Benefit