Embed Size (px)
Citation preview
TRF LIMITEDA EnterpriseRing Granulators
TRF Limited11, Station Road Burma Mines, Jamshedpur-831007, Jharkhand
Phone : +91- 657-3046500/ 598
Fax no. : +91- 657-2345732, e-mail : [email protected]
HYDERABAD
Business Development Department
Block - D, 3rd Floor,
22 Camac Street, Kolkata - 700 016
Ph : +91-33-44033553
e-mail : [email protected]
Bulk Material Handling SystemsPort &Yard Equipment Division
Assistant General Manager
Cell : + 91 - 9334002278
Ph : +91-657 - 3046242
Fax : +91-657-2345214
e-mail : [email protected]
NEW DELHI
Himalaya House,
11th Floor 23, Kasturba Gandhi Marg
Ph : +91-11-223310788 / 23314540
Fax : +91-11-23722447
e-mail : [email protected]
Flat No. 601, 6th Floor,
Paigah Plaza, Basheerbagh,
Ph : +91-40-23297630 / 23297631
Fax : +91-40-23297363
e-mail : [email protected]
MUMBAIMagnet House, 1st Floor,
Narottam Morarji Marg, Ballard Estate,
Ph : +91-22-22616853 / 22641320
Fax : +91-22-22614085
e-mail : [email protected]
REGIONAL OFFICES
MARKETING OFFICES
HEAD OFFICE & WORKS
Bulk Material Handling EquipmentAssistant Divisional Manager
Cell: +91-9304813195
Ph: +91-657-3046259
Fax: +91 - 657-2345724
e-mail: [email protected]
IMPORTANT DIMENSIONS OF RING GRANULATOR
Lik
hra
/ J
sr.
(06
57
) 2
29
13
56
Ring Granulators
TRF’s Ring Granulators are rugged, dependable units,specially designed for continuous high capacity crushing ofROM coal and other medium hard friable materials. These areideal machines for crushing coal to a size suitable forpulverisation, in power stations.
The unique crushing action by combining impact and rollingcompression in a Ring Granulator results in higher output withlower power consumption. They offer better overall economy interms of power consumption and maintenance.
Ring Granulators are available with operating capacities from40 to 1600 tonnes per hour and feed size upto 800 mm. Positiveadjustment of clearnace between the cage and the path of therings is provided to compensate for wear and to adjust ormaintain product gradation.
Internal parts such as breaker plate, cage bars or screen plate,cushing rings and liners are made of abrasion and shockresistant steels for optimum working life.
Frame
Fabricated from heavy steel plates with large inspection frontand rear doors, fitted with dust tight seals. Access for furthermaintenance is provided on the top. Doors on the sides abovethe rotor shaft facilitate removal of the rotor without completelydismantling the machine. Hydraulic door opening arrangement(optional) can be provided, if required.
Frame and Hopper Liners
Replaceable abrasion-resistant steel.
Rotor Assembly
Statically/dynamically balanced to operate with minimum ofvibration and noise. Weight concentrated within rotoreliminates the external fly-wheels.
Rotor Shaft
Forged and heat treated alloy steel.
Suspension Bars
EN-24 duplex suspension bars are provided in all models.
Crushing Rings
Heavy cast Mn-steel toothed and/or plain Crushing Ringsdepending upon applications.
CONSTRUCTION FEATURES
TRF LIMITEDAEnterprise
Cage Frame
Fabricated from heavy steel plate and supported fromheavy hinged cage shaft at top and provided with adjustingmechanism at the bottom.
Bearing
Heavy duty double row spherical roller bearings with cast steelsplit type bearing housings with labyrinth type seals.
Lubrication
Grease lubrication for small and medium size granulators. Oilsplash lubrication system for bigger models.
Drive
Direct coupled drives are recommended. For smaller models V-Belts drive may be used.
Cage Adjustment
Cage assembly can be easily moved by a ratchet wrenchand worm gear assembly either towards or away from thepath of crushing rings. Adjustment which can be madewhile the granulator is in operation, provides control overthe product size within permissible limits. The cage hingebearing is so located that in any adjusted position all partsof cage face are practically equidistant from the rotorassembly. This ensures even wear.
Cage Bars or Screen Plate
Trapezoidal cage bars are of replaceable cast Mn-steel,ensuring free discharge. Screen plates are made fromabrasion resistant steel. Selection of cage bars or screenplates depends on application.
Breaker Plate
Replaceable abrasion resistant steel, depending onrequirement.
Tramp Iron Pocket
Tramp iron and uncrushables are prevented from continuing around and back into the crushing zone by a heavy deflector plate. The debris is collected in a pocket and removed from access door.
General dataModel No.
Rotor Dia (mm)
Rotor Length (mm)
Rotor Speed (RPM)
Max Feed size (mm)
ApproximateCapacity (TPH)
550-600
5600
13,00015,00023,50026,50029,00027,00028,00030,00032,00021,00035,00043,000
6400760090001100089009700107001150090001400016000
600-700700-800800-9001100-1200800-900900-10001000-12001200-1400800-10015002000
Weight of rotor Assy.(less Bearing & P.B.) (Kg.)
Total weight (Kg)(less Drive)
1120
1816
720
550
1120
2108
720
550
1370
2045
720
650
1370
2333
720
650
1370
3077
720
650
1370
2363
720
650
1370
2538
720
650
1370
2923
720
650
1370
3231
720
650
1210
2720
720
~650
600
3300
600
~600
1800
3300
600
~650
TR-41TR-42TR-51TR-52TR-54TRM-51TRM-52TRM-53TRM-54TR - 120
x 270
TR - 160
x 330
TR - 180
x 330
SPECIAL FEATURES
Positive Adjustability - Quick, easy external adjustment of the
cage assembly...can be done while the crusher is running
Longer Parts Life - screen plate or cage bar wear
compensated by simple adjustment to desired clearance
Automatic Removal of Tramp iron - rear access door allows
fast, easy removal of debris
Hinged Cage - adjustable concentricity with the rotor balances
wear evenly among all cage bars
Wide Hopper Opening - results in uniform, even feeding... no
bridges and material build-up
Ring Granulators
= Highest capacity ring granulator developed in country.
= Specially designed for high capacity crushing of coal and lignite (range from 40 to 1600 TPH).
= Unique crushing action results in higher output and lower power consumption.
= Maximum feed size is up to 500 mm.
= Ideal for product size of (-) 20 mm. with uniform granular product.
= Crushing action involves minimum attrition and hence produces minimum fines.
= Maximum accessibility is provided to ease the routine inspection.
TRF LIMITEDA Enterprise
TEC
HN
ICA
L S
PE
CIF
ICA
TIO
NS
TRF LIMITEDAEnterprise Ring Granulators
TRF Limited11, Station Road Burma Mines, Jamshedpur-831007, Jharkhand
Phone : +91- 657-3046500/ 598
Fax no. : +91- 657-2345732, e-mail : [email protected]
HYDERABAD
Business Development Department
Block - D, 3rd Floor,
22 Camac Street, Kolkata - 700 016
Ph : +91-33-44033553
e-mail : [email protected]
Bulk Material Handling SystemsPort &Yard Equipment Division
Assistant General Manager
Cell : + 91 - 9334002278
Ph : +91-657 - 3046242
Fax : +91-657-2345214
e-mail : [email protected]
NEW DELHI
Himalaya House,
11th Floor 23, Kasturba Gandhi Marg
Ph : +91-11-223310788 / 23314540
Fax : +91-11-23722447
e-mail : [email protected]
Flat No. 601, 6th Floor,
Paigah Plaza, Basheerbagh,
Ph : +91-40-23297630 / 23297631
Fax : +91-40-23297363
e-mail : [email protected]
MUMBAIMagnet House, 1st Floor,
Narottam Morarji Marg, Ballard Estate,
Ph : +91-22-22616853 / 22641320
Fax : +91-22-22614085
e-mail : [email protected]
REGIONAL OFFICES
MARKETING OFFICES
HEAD OFFICE & WORKS
Bulk Material Handling EquipmentAssistant Divisional Manager
Cell: +91-9304813195
Ph: +91-657-3046259
Fax: +91 - 657-2345724
e-mail: [email protected]
IMPORTANT DIMENSIONS OF RING GRANULATOR
Likh
ra / Jsr. (0
65
7) 2
29
13
56
Ring Granulators
TRF’s Ring Granulators are rugged, dependable units,specially designed for continuous high capacity crushing ofROM coal and other medium hard friable materials. These areideal machines for crushing coal to a size suitable forpulverisation, in power stations.
The unique crushing action by combining impact and rollingcompression in a Ring Granulator results in higher output withlower power consumption. They offer better overall economy interms of power consumption and maintenance.
Ring Granulators are available with operating capacities from40 to 1600 tonnes per hour and feed size upto 800 mm. Positiveadjustment of clearnace between the cage and the path of therings is provided to compensate for wear and to adjust ormaintain product gradation.
Internal parts such as breaker plate, cage bars or screen plate,cushing rings and liners are made of abrasion and shockresistant steels for optimum working life.
Frame
Fabricated from heavy steel plates with large inspection frontand rear doors, fitted with dust tight seals. Access for furthermaintenance is provided on the top. Doors on the sides abovethe rotor shaft facilitate removal of the rotor without completelydismantling the machine. Hydraulic door opening arrangement(optional) can be provided, if required.
Frame and Hopper Liners
Replaceable abrasion-resistant steel.
Rotor Assembly
Statically/dynamically balanced to operate with minimum ofvibration and noise. Weight concentrated within rotoreliminates the external fly-wheels.
Rotor Shaft
Forged and heat treated alloy steel.
Suspension Bars
EN-24 duplex suspension bars are provided in all models.
Crushing Rings
Heavy cast Mn-steel toothed and/or plain Crushing Ringsdepending upon applications.
CONSTRUCTION FEATURES
TRF LIMITEDA Enterprise
Cage Frame
Fabricated from heavy steel plate and supported fromheavy hinged cage shaft at top and provided with adjustingmechanism at the bottom.
Bearing
Heavy duty double row spherical roller bearings with cast steelsplit type bearing housings with labyrinth type seals.
Lubrication
Grease lubrication for small and medium size granulators. Oilsplash lubrication system for bigger models.
Drive
Direct coupled drives are recommended. For smaller models V-Belts drive may be used.
Cage Adjustment
Cage assembly can be easily moved by a ratchet wrenchand worm gear assembly either towards or away from thepath of crushing rings. Adjustment which can be madewhile the granulator is in operation, provides control overthe product size within permissible limits. The cage hingebearing is so located that in any adjusted position all partsof cage face are practically equidistant from the rotorassembly. This ensures even wear.
Cage Bars or Screen Plate
Trapezoidal cage bars are of replaceable cast Mn-steel,ensuring free discharge. Screen plates are made fromabrasion resistant steel. Selection of cage bars or screenplates depends on application.
Breaker Plate
Replaceable abrasion resistant steel, depending onrequirement.
Tramp Iron Pocket
Tramp iron and uncrushables are prevented from continuing around and back into the crushing zone by a heavy deflector plate. The debris is collected in a pocket and removed from access door.
General dataModel No.
Rotor Dia (mm)
Rotor Length (mm)
Rotor Speed (RPM)
Max Feed size (mm)
ApproximateCapacity (TPH)
550-600
5600
13,000 15,000 23,500 26,500 29,000 27,000 28,000 30,000 32,000 21,000 35,000 43,000
6400 7600 9000 11000 8900 9700 10700 11500 9000 14000 16000
600-700 700-800 800-900 1100-1200 800-900 900-1000 1000-1200 1200-1400 800-100 1500 2000
Weight of rotor Assy.(less Bearing & P.B.) (Kg.)
Total weight (Kg)(less Drive)
1120
1816
720
550
1120
2108
720
550
1370
2045
720
650
1370
2333
720
650
1370
3077
720
650
1370
2363
720
650
1370
2538
720
650
1370
2923
720
650
1370
3231
720
650
1210
2720
720
~650
600
3300
600
~600
1800
3300
600
~650
TR-41 TR-42 TR-51 TR-52 TR-54 TRM-51 TRM-52 TRM-53 TRM-54 TR - 120
x 270
TR - 160
x 330
TR - 180
x 330
SPECIAL FEATURES
Positive Adjustability - Quick, easy external adjustment of the
cage assembly...can be done while the crusher is running
Longer Parts Life - screen plate or cage bar wear
compensated by simple adjustment to desired clearance
Automatic Removal of Tramp iron - rear access door allows
fast, easy removal of debris
Hinged Cage - adjustable concentricity with the rotor balances
wear evenly among all cage bars
Wide Hopper Opening - results in uniform, even feeding... no
bridges and material build-up
Ring Granulators
=Highest capacity ring granulator developed in country.
=Specially designed for high capacity crushing of coal and lignite (range from 40 to 1600 TPH).
=Unique crushing action results in higher output and lower power consumption.
=Maximum feed size is up to 500 mm.
=Ideal for product size of (-) 20 mm. with uniform granular product.
=Crushing action involves minimum attrition and hence produces minimum fines.
=Maximum accessibility is provided to ease the routine inspection.
TRF LIMITEDAEnterprise
TEC
HN
ICA
L SP
EC
IFICA
TION
S
TRF LIMITEDAEnterprise Ring Granulators
TRF Limited11, Station Road Burma Mines, Jamshedpur-831007, Jharkhand
Phone : +91- 657-3046500/ 598
Fax no. : +91- 657-2345732, e-mail : [email protected]
HYDERABAD
Business Development Department
Block - D, 3rd Floor,
22 Camac Street, Kolkata - 700 016
Ph : +91-33-44033553
e-mail : [email protected]
Bulk Material Handling SystemsPort &Yard Equipment Division
Assistant General Manager
Cell : + 91 - 9334002278
Ph : +91-657 - 3046242
Fax : +91-657-2345214
e-mail : [email protected]
NEW DELHI
Himalaya House,
11th Floor 23, Kasturba Gandhi Marg
Ph : +91-11-223310788 / 23314540
Fax : +91-11-23722447
e-mail : [email protected]
Flat No. 601, 6th Floor,
Paigah Plaza, Basheerbagh,
Ph : +91-40-23297630 / 23297631
Fax : +91-40-23297363
e-mail : [email protected]
MUMBAIMagnet House, 1st Floor,
Narottam Morarji Marg, Ballard Estate,
Ph : +91-22-22616853 / 22641320
Fax : +91-22-22614085
e-mail : [email protected]
REGIONAL OFFICES
MARKETING OFFICES
HEAD OFFICE & WORKS
Bulk Material Handling EquipmentAssistant Divisional Manager
Cell: +91-9304813195
Ph: +91-657-3046259
Fax: +91 - 657-2345724
e-mail: [email protected]
IMPORTANT DIMENSIONS OF RING GRANULATOR
Likh
ra / Jsr. (0
65
7) 2
29
13
56
Ring Granulators
TRF’s Ring Granulators are rugged, dependable units,specially designed for continuous high capacity crushing ofROM coal and other medium hard friable materials. These areideal machines for crushing coal to a size suitable forpulverisation, in power stations.
The unique crushing action by combining impact and rollingcompression in a Ring Granulator results in higher output withlower power consumption. They offer better overall economy interms of power consumption and maintenance.
Ring Granulators are available with operating capacities from40 to 1600 tonnes per hour and feed size upto 800 mm. Positiveadjustment of clearnace between the cage and the path of therings is provided to compensate for wear and to adjust ormaintain product gradation.
Internal parts such as breaker plate, cage bars or screen plate,cushing rings and liners are made of abrasion and shockresistant steels for optimum working life.
Frame
Fabricated from heavy steel plates with large inspection frontand rear doors, fitted with dust tight seals. Access for furthermaintenance is provided on the top. Doors on the sides abovethe rotor shaft facilitate removal of the rotor without completelydismantling the machine. Hydraulic door opening arrangement(optional) can be provided, if required.
Frame and Hopper Liners
Replaceable abrasion-resistant steel.
Rotor Assembly
Statically/dynamically balanced to operate with minimum ofvibration and noise. Weight concentrated within rotoreliminates the external fly-wheels.
Rotor Shaft
Forged and heat treated alloy steel.
Suspension Bars
EN-24 duplex suspension bars are provided in all models.
Crushing Rings
Heavy cast Mn-steel toothed and/or plain Crushing Ringsdepending upon applications.
CONSTRUCTION FEATURES
TRF LIMITEDA Enterprise
Cage Frame
Fabricated from heavy steel plate and supported fromheavy hinged cage shaft at top and provided with adjustingmechanism at the bottom.
Bearing
Heavy duty double row spherical roller bearings with cast steelsplit type bearing housings with labyrinth type seals.
Lubrication
Grease lubrication for small and medium size granulators. Oilsplash lubrication system for bigger models.
Drive
Direct coupled drives are recommended. For smaller models V-Belts drive may be used.
Cage Adjustment
Cage assembly can be easily moved by a ratchet wrenchand worm gear assembly either towards or away from thepath of crushing rings. Adjustment which can be madewhile the granulator is in operation, provides control overthe product size within permissible limits. The cage hingebearing is so located that in any adjusted position all partsof cage face are practically equidistant from the rotorassembly. This ensures even wear.
Cage Bars or Screen Plate
Trapezoidal cage bars are of replaceable cast Mn-steel,ensuring free discharge. Screen plates are made fromabrasion resistant steel. Selection of cage bars or screenplates depends on application.
Breaker Plate
Replaceable abrasion resistant steel, depending onrequirement.
Tramp Iron Pocket
Tramp iron and uncrushables are prevented from continuing around and back into the crushing zone by a heavy deflector plate. The debris is collected in a pocket and removed from access door.
General dataModel No.
Rotor Dia (mm)
Rotor Length (mm)
Rotor Speed (RPM)
Max Feed size (mm)
ApproximateCapacity (TPH)
550-600
5600
13,000 15,000 23,500 26,500 29,000 27,000 28,000 30,000 32,000 21,000 35,000 43,000
6400 7600 9000 11000 8900 9700 10700 11500 9000 14000 16000
600-700 700-800 800-900 1100-1200 800-900 900-1000 1000-1200 1200-1400 800-100 1500 2000
Weight of rotor Assy.(less Bearing & P.B.) (Kg.)
Total weight (Kg)(less Drive)
1120
1816
720
550
1120
2108
720
550
1370
2045
720
650
1370
2333
720
650
1370
3077
720
650
1370
2363
720
650
1370
2538
720
650
1370
2923
720
650
1370
3231
720
650
1210
2720
720
~650
600
3300
600
~600
1800
3300
600
~650
TR-41 TR-42 TR-51 TR-52 TR-54 TRM-51 TRM-52 TRM-53 TRM-54 TR - 120
x 270
TR - 160
x 330
TR - 180
x 330
SPECIAL FEATURES
Positive Adjustability - Quick, easy external adjustment of the
cage assembly...can be done while the crusher is running
Longer Parts Life - screen plate or cage bar wear
compensated by simple adjustment to desired clearance
Automatic Removal of Tramp iron - rear access door allows
fast, easy removal of debris
Hinged Cage - adjustable concentricity with the rotor balances
wear evenly among all cage bars
Wide Hopper Opening - results in uniform, even feeding... no
bridges and material build-up
Ring Granulators
=Highest capacity ring granulator developed in country.
=Specially designed for high capacity crushing of coal and lignite (range from 40 to 1600 TPH).
=Unique crushing action results in higher output and lower power consumption.
=Maximum feed size is up to 500 mm.
=Ideal for product size of (-) 20 mm. with uniform granular product.
=Crushing action involves minimum attrition and hence produces minimum fines.
=Maximum accessibility is provided to ease the routine inspection.
TRF LIMITEDAEnterprise
TEC
HN
ICA
L SP
EC
IFICA
TION
S
TRF LIMITEDA EnterpriseRing Granulators
TRF Limited11, Station Road Burma Mines, Jamshedpur-831007, Jharkhand
Phone : +91- 657-3046500/ 598
Fax no. : +91- 657-2345732, e-mail : [email protected]
HYDERABAD
Business Development Department
Block - D, 3rd Floor,
22 Camac Street, Kolkata - 700 016
Ph : +91-33-44033553
e-mail : [email protected]
Bulk Material Handling SystemsPort &Yard Equipment Division
Assistant General Manager
Cell : + 91 - 9334002278
Ph : +91-657 - 3046242
Fax : +91-657-2345214
e-mail : [email protected]
NEW DELHI
Himalaya House,
11th Floor 23, Kasturba Gandhi Marg
Ph : +91-11-223310788 / 23314540
Fax : +91-11-23722447
e-mail : [email protected]
Flat No. 601, 6th Floor,
Paigah Plaza, Basheerbagh,
Ph : +91-40-23297630 / 23297631
Fax : +91-40-23297363
e-mail : [email protected]
MUMBAIMagnet House, 1st Floor,
Narottam Morarji Marg, Ballard Estate,
Ph : +91-22-22616853 / 22641320
Fax : +91-22-22614085
e-mail : [email protected]
REGIONAL OFFICES
MARKETING OFFICES
HEAD OFFICE & WORKS
Bulk Material Handling EquipmentAssistant Divisional Manager
Cell: +91-9304813195
Ph: +91-657-3046259
Fax: +91 - 657-2345724
e-mail: [email protected]
IMPORTANT DIMENSIONS OF RING GRANULATOR
Lik
hra
/ J
sr.
(06
57
) 2
29
13
56
Ring Granulators
TRF’s Ring Granulators are rugged, dependable units,specially designed for continuous high capacity crushing ofROM coal and other medium hard friable materials. These areideal machines for crushing coal to a size suitable forpulverisation, in power stations.
The unique crushing action by combining impact and rollingcompression in a Ring Granulator results in higher output withlower power consumption. They offer better overall economy interms of power consumption and maintenance.
Ring Granulators are available with operating capacities from40 to 1600 tonnes per hour and feed size upto 800 mm. Positiveadjustment of clearnace between the cage and the path of therings is provided to compensate for wear and to adjust ormaintain product gradation.
Internal parts such as breaker plate, cage bars or screen plate,cushing rings and liners are made of abrasion and shockresistant steels for optimum working life.
Frame
Fabricated from heavy steel plates with large inspection frontand rear doors, fitted with dust tight seals. Access for furthermaintenance is provided on the top. Doors on the sides abovethe rotor shaft facilitate removal of the rotor without completelydismantling the machine. Hydraulic door opening arrangement(optional) can be provided, if required.
Frame and Hopper Liners
Replaceable abrasion-resistant steel.
Rotor Assembly
Statically/dynamically balanced to operate with minimum ofvibration and noise. Weight concentrated within rotoreliminates the external fly-wheels.
Rotor Shaft
Forged and heat treated alloy steel.
Suspension Bars
EN-24 duplex suspension bars are provided in all models.
Crushing Rings
Heavy cast Mn-steel toothed and/or plain Crushing Ringsdepending upon applications.
CONSTRUCTION FEATURES
TRF LIMITEDAEnterprise
Cage Frame
Fabricated from heavy steel plate and supported fromheavy hinged cage shaft at top and provided with adjustingmechanism at the bottom.
Bearing
Heavy duty double row spherical roller bearings with cast steelsplit type bearing housings with labyrinth type seals.
Lubrication
Grease lubrication for small and medium size granulators. Oilsplash lubrication system for bigger models.
Drive
Direct coupled drives are recommended. For smaller models V-Belts drive may be used.
Cage Adjustment
Cage assembly can be easily moved by a ratchet wrenchand worm gear assembly either towards or away from thepath of crushing rings. Adjustment which can be madewhile the granulator is in operation, provides control overthe product size within permissible limits. The cage hingebearing is so located that in any adjusted position all partsof cage face are practically equidistant from the rotorassembly. This ensures even wear.
Cage Bars or Screen Plate
Trapezoidal cage bars are of replaceable cast Mn-steel,ensuring free discharge. Screen plates are made fromabrasion resistant steel. Selection of cage bars or screenplates depends on application.
Breaker Plate
Replaceable abrasion resistant steel, depending onrequirement.
Tramp Iron Pocket
Tramp iron and uncrushables are prevented from continuing around and back into the crushing zone by a heavy deflector plate. The debris is collected in a pocket and removed from access door.
General dataModel No.
Rotor Dia (mm)
Rotor Length (mm)
Rotor Speed (RPM)
Max Feed size (mm)
ApproximateCapacity (TPH)
550-600
5600
13,00015,00023,50026,50029,00027,00028,00030,00032,00021,00035,00043,000
6400760090001100089009700107001150090001400016000
600-700700-800800-9001100-1200800-900900-10001000-12001200-1400800-10015002000
Weight of rotor Assy.(less Bearing & P.B.) (Kg.)
Total weight (Kg)(less Drive)
1120
1816
720
550
1120
2108
720
550
1370
2045
720
650
1370
2333
720
650
1370
3077
720
650
1370
2363
720
650
1370
2538
720
650
1370
2923
720
650
1370
3231
720
650
1210
2720
720
~650
600
3300
600
~600
1800
3300
600
~650
TR-41TR-42TR-51TR-52TR-54TRM-51TRM-52TRM-53TRM-54TR - 120
x 270
TR - 160
x 330
TR - 180
x 330
SPECIAL FEATURES
Positive Adjustability - Quick, easy external adjustment of the
cage assembly...can be done while the crusher is running
Longer Parts Life - screen plate or cage bar wear
compensated by simple adjustment to desired clearance
Automatic Removal of Tramp iron - rear access door allows
fast, easy removal of debris
Hinged Cage - adjustable concentricity with the rotor balances
wear evenly among all cage bars
Wide Hopper Opening - results in uniform, even feeding... no
bridges and material build-up
Ring Granulators
= Highest capacity ring granulator developed in country.
= Specially designed for high capacity crushing of coal and lignite (range from 40 to 1600 TPH).
= Unique crushing action results in higher output and lower power consumption.
= Maximum feed size is up to 500 mm.
= Ideal for product size of (-) 20 mm. with uniform granular product.
= Crushing action involves minimum attrition and hence produces minimum fines.
= Maximum accessibility is provided to ease the routine inspection.
TRF LIMITEDA Enterprise
TEC
HN
ICA
L S
PE
CIF
ICA
TIO
NS
