panblast.com · Fina Valve 1" F X 1-1/2" M Assembly Abrasive metering valves are used to control media feed rate from the blast pot storage hopper into the blast hose pusher line,

BLAST POTS1All pressure vessels are certified in accordance to market requirements including, but not limited to ASME, PED, AS/NZS, DOSH, MOM, etc.

BP Series Automatic Blast Pots are available in several configurations, which include manual adjust and pressure-hold abrasive metering valves, combination or separate remote control valves, and corresponding styles of deadman handles including optional hands-free types. This bread-and-butter product series is especially suited for compressed air blasting applications with low to medium production volumes.

BP Series Manual Blast Pots are fitted with economical ball valve controls for use in conjunction with human pot tenders during operation. This product series can be used in markets that do not prohibit the use of manual control blast pots using human pot tender operators. MANUAL

BP50-1 Blast PotCAT-0101-01Page 4 to 7




BP110-1 Blast PotCAT-0101-02CAT-0101-08Page 8 to 15




BP600-1 Blast PotCAT-0101-11CAT-0101-12CAT-0101-05Page 28 to 39

BP600-3 Blast PotCAT-0102-04CAT-0102-05Page 64 to 71




AUTOMATIC

Specialty Blast Pots include the CB Series Continuous Blasters, which are double chamber, single or multiple outlet pressure vessels that are ideal for non-stop high volume blasting applications. Other specialty items include the SB Series, which is specially configured for soda, or sodium bicarbonate blasting, and the MB series, which is suited for delicate ultra-low pressure blasting, or paint stripping using plastic media.

BB Series Bulk Blasters are ideal for high volume blasting applications in the field using multiple operators. Both trailer and skid mount variants are available, and each can be configured for use with pneumatic remote controls or electric remote controls for extended blasting distance.

SPECIALTY

BULK

BB120T-2 Blast Pot - PneumaticCAT-0104-03

Page 100 to 103

BB120T-2 Blast Pot - ElectricCAT-0104-04

Page 104 to 107

BB120S-2 Blast Pot - ElectricCAT-0104-01Page 92 to 95

CB800 Blast PotCAT-0103-03CAT-0103-04Page 84 to 91

SB600-2 Blast PotCAT-0103-05Page 80 to 83

SB316-2 Blast PotCAT-0103-06Page 76 to 79

MB600-2 Blast PotCAT-0103-02Page 72 to 75

BB120S-2 Blast Pot - PneumaticCAT-0104-02Page 96 to 99

2PanBlast remote control valves are for pressure vessel air inlet and/or air outlet control, and are available in both BSP and NPT thread configurations.

For small capacity blast pots

For medium capacity blast pots

For large capacity blast pots

For small, large, pressure hold & bulk blast pots

For large capacity blast pots

Air inlet valve variants include Sola, Tandem and Helix types.

Air exhaust valve variants include Sola, HiFlo, Diaphragm Dump and Helix types.

Diaphragm activated

Piston activated depressurization

Fast diaphragm depressurization

Piston activated depressurization

Sola 5 InletValve Assembly

CAT-0201-01Page 110 to 113

Sola 5 NPTExhaust Valve

CAT-0202-01Page 150 to 153

Helix 50 OutletValve Assembly

CAT-0202-02Page 154 to 157

Helix 50 NPT OutletValve Assembly

CAT-0202-03Page 158 to 161

Sola 5 NPT InletValve Assembly

CAT-0201-02Page 114 to 117

3/4" Tandem NPTValve Assembly

CAT-0201-03Page 118 to 121

1" Tandem NPTValve Assembly

CAT-0201-04Page 122 to 125

1-1/4" Tandem NPTValve Assembly

CAT-0201-05Page 126 to 129

1-1/2" Tandem NPTValve Assembly

CAT-0201-06Page 130 to 133

1" NPT DiaphragmDump ValveCAT-0202-04

Page 162 to 165

AbraFlo NPT Abrasive

Trap II AssemblyCAT-0202-06

Page 170 to 173

HiFlo NPT ExhaustDump Valve Assembly

CAT-0202-05Page 166 to 169


CAT-0201-07Page 134 to 137


CAT-0201-08Page 138 to 141

Helix100 InletValve Assembly

CAT-0201-09Page 142 to 145

Helix100 NPT InletValve Assembly

CAT-0201-10Page 146 to 149

REMOTECONTROL VALVES

AIR INLET

AIR EXHAUST

Cyclonic filtration of fines and dust from exhaust air

Combination valve variants include UniFlo, Kombi and Helix 150.

Durable duty Inlet/exhaust hose pinch combo

Heavy dutyInlet/exhaust hose pinch combo

High flowInlet/exhaust hose pinch combo

Pinch valve variants include Pinch Valve and Safe-T-Pinch.

LightweightInlet/exhaust combo

Dual ramSafety spring closureWide blast hose entry throat

ModularPiston/diaphragm combination

Single ramRugged cast iron construction

PINCH

Safe-T-Pinch Valve AssemblyCAT-0204-02

Page 208 to 211

Pinch Valve NPT AssemblyCAT-0204-01

Page 204 to 207

Kombi NPT RemoteControl Valve

CAT-0203-06Page 184 to 187

Kombi II NPT RemoteControl Valve

CAT-0203-07Page 188 to 191

Kombi III NPT RemoteControl Valve

CAT-0203-10Page 192 to 195

Helix 150Valve Assembly

CAT-0203-08Page 196 to 199

Helix 150 NPTValve Assembly

CAT-0203-09Page 200 to 203

UniFlo ValveAssembly with Fittings

CAT-0203-02Page 176 to 179

COMBINATION

3PanBlast remote control handles are for control of pressure blast pot operation remotely, and are available in both pneumatic and electric configurations (for extended control distance and faster response times).

AIR BLEED

NON BLEED

ELECTRIC

QuikStop IIS PneumaticControl Handle

CAT-0301-01Page 214 to 217

AirStop PneumaticControl Handle

CAT-0302-01Page 226 to 229

AirStop NPT PneumaticControl Handle

CAT-0302-02Page 230 to 233

AutoLok Control HandleAssembly

CAT-0302-04Page 238 to 241

AirFlo NPT PneumaticControl Handle

CAT-0301-03Page 222 to 225

AirFlo PneumaticControl Handle

CAT-0301-02Page 218 to 221

AirStop IV NPT PneumaticControl Handle

CAT-0302-05Page 242 to 245

AirStop II NPT PneumaticControl Handle

CAT-0302-03Page 234 to 237

AirFlo ElectricControl Handle

CAT-0303-01Page 250 to 253

QuikStop IIS ElectricControl Handle

CAT-0303-05Page 246 to 249

AirStop II ElectricControl Handle

CAT-0303-03Page 258 to 261

AirStop ElectricControl Handle

CAT-0303-02Page 254 to 257

REMOTECONTROL HANDLES

Hands-free operation, safety ball and hand strap

Lightweight, safety lock-out button

Lightweight, safety lock-out button

Weather proof switch, long lever type

Sealed encased switch, compact design

Enclosed switch, extended service life

Ergonomic operation, replaceable switch

Robust wide lever, dual stage lever lock

Extended lever, safety lock-out button

Compact, quick blast hose attachment



Electric variants include AirFlo, AirStop, AirStop II and QuikStop IIS.

Air bleed variants include AirFlo and QuikStop IIS.

Non-bleed variants include AirStop, AirStop II, AirStop IV and AutoLok.

ELECTRIC REMOTE SYSTEM

TWINLINE HOSES

ERC6-2 Electric Remote SystemWith AirblowCAT-0303-06

Page 266 to 267

ERC6-1 Electric Remote SystemCAT-0303-04

Page 264 to 265

10M (33') Twinline Hose Assembly

CAT-0304-01Page 272 to 273

20M (66') Twinline Hose Assembly

CAT-0304-01Page 272 to 273

20M (66') Twinline EXT/ Hose Assembly

CAT-0304-01Page 272 to 273

Color coded, quick disconnects

Master control, integrated six operator system

Six operator, independent air blow down function

Color coded, quick disconnects

Color coded extension, quick disconnects

Pneumatic Twinline Hose variants.

Electric Remote System.

Conversion Kit – Single Operator20m (66') Remote Conversion Kit40m (132') Remote Conversion Kit60m (198') Remote Conversion Kit

Single operator,20m (66') / 40m (132') / 60m (198')remote conversion kit

CAT-0305-01Page 268 to 271

Plana Valve Assembly

4

Abrasive drain port

MANUAL PLUNGER

METERING DISC

CAT-0701-01Page 276 to 279

Fina Valve NPT 1-1/4" M X 1-1/4" MFina Valve NPT 1-1/2" M X 1-1/2" MFina Valve NPT 1-1/4" M X 1-1/2" MFina Valve NPT 1" F X 1-1/2" M

Fina II Valve 1-1/4" M X 1-1/4" MFina II Valve 1-1/2" M X 1-1/2" MFina II Valve 1-1/4" M X 1-1/2" MFina II Valve 1" F X 1-1/2" MFina II Valve 1/2" M X 3/4" F

Fina II Valve NPT 1-1/4" M X 1-1/4" MFina II Valve NPT 1-1/2" M X 1-1/2" MFina II Valve NPT 1-1/4" M X 1-1/2" MFina II Valve NPT NPT 1" F X 1-1/2" M

ABRASIVEMETERING VALVES

All abrasive media

Manually operated for pressure release blast pots, low profile with precision media metering.

Traditional disc & lever media metering, general contractor usage for fast start-up and shutdown applications.

Metering knob with urethane sleeve

All abrasive media

CAT-0703-01Page 316 to 319

Junior Plana NPT Valve

All abrasive media Low profile Lever handle operated

CAT-0703-02Page 320 to 323

Not for metallic media45 degree configurationLever handle operated

Plana II Valve AssemblyCAT-0703-03Page 324 to 327

All abrasive media45 degree configurationLever handle operatedEasy maintenance

Plana II NPT Valve AssemblyCAT-0703-04Page 328 to 331

All abrasive media45 degree configurationLever handle operatedEasy maintenance

Fina Valve 1-1/4" M X 1-1/4" M AssemblyFina Valve 1-1/2" M X 1-1/2" M AssemblyFina Valve 1-1/4" M X 1-1/2" M AssemblyFina Valve 1" F X 1-1/2" M Assembly

Abrasive metering valves are used to control media feed rate from the blast pot storage hopper into the blast hose pusher line, and are available in manual/automatic plunger, metering disc and ball valve configurations.

CAT-0701-02Page 280 to 283

CAT-0701-03Page 284 to 287

CAT-0701-04Page 288 to 291

Metering knob with urethane sleeve

Improved serviceability

All abrasive media

BALL VALVE

AUTOMATIC PLUNGER

Suited to garnet mediaFixed urethane metering orificeStainless steel body

Economical ball valve operation for applications that do not require precise metering.

Auto pilot air operated for pressure hold & pressure release systems, media saving characteristics, optional remote abrasive cut off.

Corsa NPT 1-1/4" with Urethane SleeveCorsa NPT 1-1/2" with Urethane Sleeve

CAT-0702-01Page 292 to 295

For fine media usageTungsten plunger

Corsa NPT 1-1/4" with Tungsten SleeveCorsa NPT 1-1/2" with Tungsten Sleeve

For fine media usageTungsten plunger Extended life

Corsa II 1-1/4" with Urethane SleeveCorsa II 1-1/2" with Urethane SleeveCAT-0702-03Page 300 to 303

Corsa II NPT 1-1/4" with Urethane SleeveCorsa II NPT 1-1/2" with Urethane SleeveCAT-0702-05Page 308 to 311

Abrasive drain port

Easy maintenance

All abrasive media

Corsa II 1-1/4" with Tungsten SleeveCorsa II 1-1/2" with Tungsten Sleeve

CAT-0702-04Page 304 to 307

Enviro Valve AssemblyCAT-0704-01Page 332 to 333

Corsa II NPT 1-1/4" with Tungsten SleeveCorsa II NPT 1-1/2" with Tungsten Sleeve

CAT-0702-06Page 312 to 315

Abrasive drain portSolid tungsten plunger & sleeveEasy maintenance

CAT-0702-02Page 296 to 299

Solid tungsten plunger & sleeve

Extended life

ATN-S SERIES

ATN-M SERIES

ABN-S SERIES

5 The PanBlastTM blast nozzle range is suited for general and specialty blasting applications. They are available in durable tungsten or boron carbide liners and feature straight, venturi or injector nozzle designs, and are typically fitted with aluminum jacket protection.

ATN-T SERIES

BLAST NOZZLES

Durable tungsten carbide linerFor smaller pots, cabinets and pipe blasting tools

Enlarged blast patternDurable tungsten carbide linerFor smaller pots, cabinets and pipe blasting tools

Enlarged blast patternDurable tungsten carbide linerFor smaller pots, cabinets and pipe blasting tools

Extended life boron carbide linerFor smaller pots, cabinets and pipe blasting tools

ATN-2S

ATN-5S ATN-6S ATN-8S

ATN-3M ATN-4M ATN-5T ATN-6T

ATN-3S ATN-4SABN-2S

ABN-5S ABN-6S ABN-8S

ABN-3S ABN-4S

CAT-1501-01 Page 336 to 337 CAT-1501-01 Page 336 to 337


ATN SERIES

ABN SERIES

ATN-4

ATN-5

ATN-6

ATN-7

ATN-8

Durable tungsten carbide linerWide throat long venturi Coarse contractor thread prevents freezing

CAT-1502-01 Page 340 to 341

CAT-1502-01 Page 340 to 341

ABN-4

ABN-5

ABN-6

ABN-7

ABN-8

Extended life boron carbide linerWide throat long venturiCoarse contractor thread prevents freezing

ATV SERIES

ACCESSORIES

SIDEWINDER SERIES

AIN SERIES

35% wider blast pattern for higher productivityDual venturi configurationDurable tungsten carbide linerCoarse contractor thread prevents freezing

Hypodermic Needle GaugeWet Head Assembly

ATV-5 ATV-6

ATV-7 ATV-8

AIN-4 AIN-5

AIN-6

AIN-7 AIN-8

4x1 2’’ UNC

4x3 2’’ UNC

5x1 2’’ UNC

5x3 2’’ UNC

6x1 2’’ UNC

6x3 2’’ UNC

4x1 1-1/4’’ NPSM

4x3 1-1/4’’ NPSM

5x1 1-1/4’’ NPSM

5x3 1-1/4’’ NPSM

6x1 1-1/4’’ NPSM

6x3 1-1/4’’ NPSM

Dust-free slurry blastingAdjustable water atomizationDurable tungsten carbide linerCoarse contractor thread prevents freezing

Corner and angle blastingAvailable in single or triple outletsDurable tungsten carbide linerCoarse contractor thread prevents freezing

Dust reducing water jacketAdjustable water ringCan be fitted to most commercial nozzles

Blast pressure measurement at nozzlePractical and economicalCan be used with most commercial nozzles

CVN SERIES

CVN-5 CVN-6 CVN-7 CVN-8Economical hardened alloy linerLong venturi Can be used with standard nozzle holders

CAT-1502-03 Page 342 to 343

CAT-1503-01 Page 344 to 345v

CAT-1503-02 Page 346 to 347

CAT-1504-01 Page 348 to 349

CAT-1505-01 Page 350 to 351

CAT-1505-02 Page 354 to 355

HOSE-TO-TOOL WHIP CHECKS

2 PLY ENDUROLITE

6 The PanBlastTM range of blast hoses are manufactured from virgin natural rubber, and have 2 or 4 ply braided high tensile textile cord reinforcement. The blast hose protective covers are abrasion, weather and ozone resistant for extended durability during outdoor use. The use of safety whip checks with blast hoses is strongly recommended to prevent serious injury in the event of hose or coupling failure.

BLAST HOSES

Lightweight 15 bar (217 psi) pressure rating

Lightweight 20 bar (290 psi) pressure rating

Extended wear life 15 bar (217 psi) pressure rating

Extended wear life 20 bar (290 psi) pressure rating

For connection at equipment-to-hose couplingsInstall in fully extended position

Nozzle Holders

Washers

NNH-0

NNH-1/2 10G x 1/2

10G x 1/2

10G x 1/2

10G x 1/2

10G x 1/2

10G x 1/2

RNW-25/RNW-32

RNW-25/RNW-32

RNW-25/RNW-32

RNW-25/RNW-32

ANH-1/2

NNH-1

ANH-1

NNH-1

ANH-1

RNW-1

RNW-2

RNW-2

RNW-1 8G x 1/2

ScrewsHolders

Blast Hoses Couplings

Couplings Gaskets Couplings Gaskets Locking Pins ScrewsA B

ID

28 mm (1-1/8”)

13 mm (1/2”)

19 mm (3/4”)

13 mm (1/2”)

19 mm (3/4”)

32 mm (1-1/4”)32 mm (1-1/4”)25 mm

(1”)25 mm

(1”)

38 mm (1-1/2”)

48 mm (1-7/8”)

25 mm (1”)

25 mm (1”)

LD - 2 Ply

LD - 2 Ply

HD - 2 Ply

SHC-0

NHC-3/4 NCG-1

BCG-1/2

BCG-1/2

NTC-1

NTC-1/2

STC-1/2

NCG-2

BCG-1/2

BCG-1/2

NCP-1

BCP-1

BCP-1

NHC-1/2

SHC-1/2

BCG-0 STC-0 BCG-0 BCP-1 8G x 1/2

10G x 1/2

10G x 1/2

10G x 1/2

10G x 1/2

10G x 1/2

10G x 1/2

10G x 1/2

10G x 1/2

PlyODOptional Whip Checks

3 mm Hose To

Hose

3 mm Hose To

Hose

6 mm Hose To

Hose

6 mm Hose To

Tool

6 mm Hose To

Hose

6 mm Hose To

Tool

3 mm Hose To

Tool

3 mm Hose To

Tool

6 mm Hose To

Hose

6 mm Hose To

Tool

34 mm(1-5/16”)

10G x 1/2

10G x 1/2

10G x 1/2

10G x 1/2

10G x 1/2

RNW-32

RNW-2

NNH-2

NNH-2

NNH-3

ANH-3 N/A

ANH-4 N/A

ANH-2

RNW-25

NHC-1

NHC-1-25 NCG-1-25

SHC-1

SHC-2

NHC-2 NCG-2

BCG-1

BCG-1 BCG-1

BCG-1 BCP-1

BCP-1

NCP-1

NCG-1 NCG-2

NCG-2

NCG-2

NCP-1

NCP-1

NTC-1

NTC-1

NTC-1

STC-1

STC-1or

STC-2

HD - 2 Ply

LD - 2 Ply

LD - 4 Ply

LD - 2 Ply

LD - 4 Ply

HD - 2 Ply

HD - 4 Ply

38 mm (1-1/2”)38 mm (1-1/2”)32 mm (1-1/4”)32 mm (1-1/4”)

55 mm (2-3/16”)

60 mm (2-3/8”)

10G x 1/2

10G x 1/2

10G x 1/2

6 mm Hose To

Hose

6 mm Hose To

Tool

6 mm Hose To

Hose

6 mm Hose To

Tool10G x 1/2

SHC-3

NHC-3

NHC-4

NCG-2

NCG-2

BCG-1 BCG-1 BCP-1

NCG-2 NCP-1

NCP-1

NTC-1

STC-2 BCG-1

STC-1or

STC-2

LD - 2 Ply

LD - 4 Ply

HD - 2 Ply

HD - 4 Ply

38 mm (1-1/2”)38 mm (1-1/2”)

HD - 2 Ply

HD - 4 Ply

4 PLY ENDUROLITE

2 PLY ENDURO

HOSE-TO-HOSE WHIP CHECKS

For connection at hose-to-hose couplingsInstall in fully extended position

3 mm Whip Check- Hose/Tool

3 mm Whip Check- Hose/Hose

6 mm Whip Check- Hose/Hose

6 mm Whip Check- Hose/Tool

4 PLY ENDURO


CAT-0403-06 Page 382 to 383

NYLON COUPLINGS

COUPLING GASKETS

NYLON NOZZLE HOLDERS ALUMINUM NOZZLE HOLDERS

LOCKING PINS

NOZZLE WASHERS

STEEL COUPLINGS

7The PanBlastTM range of couplings and nozzle holders are manufactured from a variety of materials to suit different application requirements. The lightweight, durable and precision fit nylon series is ideal for general blasting applications. For harsh operating environments or heavy hose dragging applications, zinc plated steel couplings in conjunction with aluminum nozzle holders will ensure extended durability.

COUPLINGS & NOZZLE HOLDERS

Lightweight Excellent sealing & precise coupling

For blast hose sealing against couplingManufactured from virgin natural rubber

LightweightExcellent sealing

For nozzle sealing against holderManufactured from virgin natural rubber

Heavy dutyContractor coarse thread prevents freezing

Ensures coupling safetyManufactured from spring steel

Rugged & heavy dutyZinc plated for corrosion resistance

NHC-1/2 NHC-3/4 NHC-1

NHC-1-25 NHC-2 NHC-3

NTC-1/2 NTC-1

SHC-0 SHC-1/2 SHC-1

SHC-2 SHC-3 STC-0

STC-1 STC-2STC-1/2NHC-4

BCG-0 BCG-1/2 BCG-1

NCG-1 NCG-1-25 NCG-2 BCP-1

ANH-1/2

ANH-1

ANH-2

ANH-3

NCP-1

NNH-1

NNH-2

NNH-3

NNH-1/2

NNH-0

RNW-1 RNW-2 RNW-25 RNW-32

Contractor coarse thread prevents freezing


CAT-1301-04 Page 372 to 373

CAT-1301-04 Page 372 to 373


CAT-1301-02 Page 370 to 371

POT SCREENS & LIDS

BALL VALVES

NON RETURN VALVES PRESSURE GAUGES

PRESSURE RELIEF VALVESEXHAUST MUFFLER

8The PanBlastTM range of blast pot accessories may be used for both generic and PanBlastTM pressure blast pots. Each quality component contributes to proper equipment functioning, durability, and operational safety of pressure blast pots.

BLAST POT ACCESSORIES

13 mm (1/2") 19 mm (3/4") 25 mm (1") 6 mm (1/4") Rear Entry 6 mm (1/4") Base Entry32 mm (1-1/4")

610 mm (24") Φ Lid 510 mm (20") Φ Lid 410 mm (16") Φ Lid 305 mm (12") Φ Lid 250 mm (10") Φ Lid

610 mm (24") Φ Screen 510 mm (20") Φ Screen 410 mm (16") Φ Screen 305 mm (12") Φ Screen 250 mm (10") Φ Screen

13 mm (1/2")-150 PSI

6 mm (1/4")-125 PSI

CAT-0403-01 Page 376 to 377

CAT-0403-01 Page 376 to 377

CAT-0403-01 Page 376 to 377

CAT-0403-01 Page 376 to 377

CAT-0403-01 Page 376 to 377

CAT-0403-05-00 Page 380 to 381

19 mm (3/4") barb fitting connects to most remote exhaust valves Discharge noise reduction of up to 70%

Prevents abrasive blow back to extend service life of remote control valve15 Bar (217 psi) pressure rating

Displays compressed air supply pressureHorizontal & vertical configurationsCompact & economical

Screen prevents entry of particles larger than 6 mm (1/4") into blast potLid prevents entry of moisture and foreign objects into blast pot

Safety relief valves for pressurized systems100% tested for relief pressure8.7 Bar (125 psi) & 10.4 Bar (150 psi) versions

6 mm (1/4") BSP - 150 PSI

13 mm (1/2") BSP - 125 PSI

13 mm (1/2")10 mm (3/8")

6 mm (1/4") 25 mm (1")19 mm (3/4") 32 mm (1-1/4")

38 mm (1-1/2")

Full bore construction for maximum flow rateConstructed from corrosion resistant brass

POP UP VALVES AND SEATING RINGS

SPUD FITTINGS

HOSE COUPLINGS

HOSE CLAMPSCOMPRESSED AIR HOSES

Junior Pop Up Valve

50 mm (2") Spud Wing Nut

50 mm (2") BSP Male Spud

50 mm (2") BSP Female Spud

50 mm (2") Tail Fitting Spud

50 mm (2") Double Fitting Spud

Four Bolt

Female Claw Coupling Male Claw Coupling Claw Coupling Tail Female Coupling Male Coupling Hose End

P/U Dome Pop Up Valve - Seating Ring

CAT-0403-06 Page 382 to 383

CAT-0403-06 Page 382 to 383

CAT-0403-06 Page 382 to 383

CAT-0403-06 Page 382 to 383

CAT-0403-02 Page 378 to 379

Pop up Valve - Sleeve Type

Pop up Valve - Stem Type

Pop up Valve Seating RingJunior Seating Ring

P&G Pop Up Valve

P&G High Volume Pop Up Valve

P/U Dome Pop Up Valve

Constructed from polyurethane or virgin rubber for excellent sealing Various styles available to suit blast pot internal plumbing layout

Commercial fittings to ensure adequate air volume and minimal pressure lossAvailable in various styles to suit equipment configuration

Commercial clamps to ensure secure coupling of compressed air lines to equipmentAvailable in various sizes to suit equipment requirements

Commercial fittings for coupling of compressed air lines to equipmentAvailable in various sizes to suit equipment requirements

Commercial air supply hose to ensure adequate air volume with minimal pressure loss to equipmentAvailable in various sizes to suit equipment requirements

38 mm (1-1/2") 50 mm (2")

Double Bolt

13 mm (1/2") 19 mm (3/4") 25 mm (1")32 mm (1-1/4")

38 mm (1-1/2")50 mm (2")

13 mm (1/2")19 mm (3/4")25 mm (1")32 mm (1-1/4")

Per/mPer/mPer/mPer/mPer/mPer/m

13 mm (1/2") BSP

19 mm (3/4") BSP

25 mm (1") BSP

32 mm (1-1/4") BSP

13 mm (1/2") BSP

19 mm (3/4") BSP

25 mm (1") BSP

32 mm (1-1/4") BSP

13 mm (1/2")

19 mm (3/4")

25 mm (1")

32 mm (1-1/4")

38 mm (1-1/2") BSP

50 mm (2") BSP

38 mm (1-1/2") BSP

50 mm (2") BSP

38 mm (1-1/2")

50 mm (2")

TITAN II SAR COSMO SAR

SPARTAN SAR

AIR COOLING CONTROLLER

CLIMATE CONTROLLER

AIR FLOW CONTROLLER

AURORA LED HELMET LIGHT

GALAXY SAR

9The PanBlastTM range of personal protection equipment is specifically designed for use during blast cleaning operations to provide safety and comfort to the operator performing this arduous activity.

OPERATOR PROTECTION

CAT-1601-01 Page 386 to 389

CAT-1603-01 Page 406 to 409

CAT-1602-01 Page 394 to 397

CAT-1602-03 Page 402 to 405

CAT-1602-02 Page 398 to 401

CAT-1604-01 Page 414 to 415

CAT-1603-02 Page 410 to 413

CAT-1601-02 Page 390 to 393

Impact resistant lightweight black ABS outer shellComfort head and cheek padding with air flow indicatorMulti-directional AcoustiFlex sound deadening breathing tubeSupplied inner lens complies with EN166:2001 Table 7; Class B and conforms to AS1337 – V Grade Impact ResistanceCertifications: European CE: EN14594:2018 Class 4BAustralia and New Zealand: AS/NZS 1716:2012

Economical lightweight polyethylene outer shellFront flow air dispersion system Comfort padding for neck paddingTo be used in conjunction with industrial safety goggles and ear plugs

Reduces air temperature by up to 66ºF (19ºC)No batteries or external power requiredStatic vortex cooling - no moving partsCertifications: European CE: EN14594: 2018 Class 4BAustralia and New Zealand: AS/NZS 1716:2012

Decreases air temperature by up to 59ºF (15ºC)Increases air temperature by up to 86ºF (30ºC)Sliding lever switches from cooling to heatingNo batteries or external power requiredStatic vortex operation - no moving partsCertifications: European CE: EN14594: 2018 Class 4BAustralia and New Zealand: AS/NZS 1716:2012

20+ hours of operation at 1000-1300 lux per charge3.7 V rechargeable lithium ion battery includedMaintenance-free LED lamp with no heat generationSteel strap and bracket for mounting to most blast helmets currently in the marketReplaceable glass lens

Simple and durable flow controller designNo batteries or external power requiredCertifications: European CE: EN14594: 2018 Class 4BAustralia and New Zealand: AS/NZS 1716:2012

Rigid, safety red lightweight polyethylene outer shell

Front flow air dispersion system with air flow indicator

Multi-directional AcoustiFlex sound deadening breathing tube

Supplied inner lens complies with EN166:2001 Table 7; Class B and conforms to AS1337 – V Grade Impact Resistance

Certifications: Australia and New Zealand: AS/NZS 1716:2012

Rigid, safety red lightweight polyethylene outer shellFront flow air dispersion system with air flow indicatorBright safety yellow high visibility capeTo be used in conjunction with industrial safety goggles and ear plugs

Air Flow Controller

Air Cooling Controller

Air Flow Controller

Climate Controller

Standard Cape Leather Cape


Air Flow Controller

Climate Controller


Air Flow Controller

Climate Controller

AIRLINE CO MONITOR

PBF II JUNIOR FILTER

AIRLINE FILTER CARTRIDGE

VISIFLO-S FILTERS

PBF II FILTERS

VISIFLO-P FILTERS

10The PanBlastTM range of respirator airline filters may be used in conjunction with either generic or PanBlastTM respirator blast helmets. Each respirator airline filter removes moisture and odors from the supplied breathing air to enhance operator comfort during use.

RESPIRATOR AIRLINE FILTERS

PBF II-1

VisiFlo-PVisiFlo-S

VisiFlo-S with CO Monitor VisiFlo-P with CO Monitor

PBF II-3 PBF II-4

Mobile CO Monitor

Mobile Remote Alarm

PBF II-1 with Micromist

PBF II-3 with Micromist

CAT-1702-01 Page 428 to 431

Removes moisture & odour from breathing air

Economical with 3-stage filtration

Fits industry standard “insertion cartridge” respirator airline filters

Also fits “flanged cartridge” respirator airline filters via flange adapter kit

Detects carbon monoxide (CO) in breathing air

Integral visual and audible alarm with flow and status indicators

Multi-voltage operation (240/120 VAC and 12 VDC)

Portable & rugged case

Optional remote alarm system, with strobe, siren and 20 m (66 ft) cable

Incorporates pressure regulator and gauge, pressure relief and drain valves

Available in single and multi-operator configurations

CE marked under PED 97/23/EC

Optional micro mist filter further removes oil mist and sub-micron particulates from the breathing air for AS/NZS1715 compliance

CAT-1701-01 Page 424 to 427 CAT-1704-01 Page 440 to 441 CAT-1605-01 Page 420 to 421

Incorporates pressure regulator and gauge, safety relief and drain valves

Freestanding rugged design with carry handle

CE marked under PED 97/23/EC

CAT-1703-02 Page 436 to 439

Clear, virtually indestructible housing tube for visual inspection of filter interior



CE marked under PED 97/23/EC Category I, PS*DN<3000 150 psi (1035 kPa) working pressure

Can be used in horizontally, vertically, wall mounted or free standing

Optional CO monitoring system mounted directly on filter body

CAT-1703-01 Page 432 to 435



CE marked under PED 97/23/EC Category I, PS*DN<3000 with 150 psi (1035 kPa) working pressure

Can be used in horizontally, vertically, wall mounted or free standing

Optional CO monitoring system mounted directly on filter body

MOISTURE SEPARATORS

AFTER COOLERS

PRESSURE REGULATORS

11The PanBlastTM range of compressed air preparation equipment includes pressure regulators, moisture separators and after coolers. Clean and dry compressed air supplied at the appropriate pressure is required to ensure a high quality blast stream with minimal clogging or clumping, of abrasive media.

COMPRESSED AIR PREPARATION

Removes moisture from compressed air supplyEconomical with water drain featureReplaceable filter element

Regulates compressed air supply pressurePressure adjusting knob Lightweight & economical

Significantly less downtime, breakdown and repairsEffectively removes moisture from compressed airDry air provides smooth and continuous abrasive media flow

CAT-0501-01 Page 444 to 445

CAT-0503-01 Page 446 to 447

CAT-0505-01 Page 448 to 449

9.5mm (3/8")Moisture Separator

6mm (1/4") Filter Regulator

ACC-250After Cooler

ACC-400After Cooler

ACC-750After Cooler

ACC-950After Cooler

13mm (1/2")Pressure Regulator


25mm (1")Pressure Regulator

9.5mm 3/8" Filter Regulator

13mm (1/2") Filter Regulator


9.5mm (3/8")Pressure Regulator

13mm (1/2")Moisture Separator

32mm (1-1/4")Moisture Separator

38mm (1-1/2")Moisture Separator

13mm (1/2") Filter Element

19mm (3/4") Filter Element

32mm (1-1/4") & 38mm (1-1/2") Filter Element

19mm (3/4")Moisture Separator

25mm (1")Moisture Separator

CONEBLAST 1/4

CONEBLAST 1/2

TORNADO

12The PanBlastTM range of pipe blasting tools can be used for internal pipe diameters ranging from 19 mm (3/4") to 1525 mm (60"). These tools are suitable for onsite blasting and have matching transport carriages to suit various pipe diameters. They are durable, non-jamming and have low maintenance requirements for maximum productivity.

PIPE BLASTING TOOLS

CAT-1001-01 Page 452 to 455

CAT-1002-01 Page 456 to 459

CAT-1003-01 Page 460 to 463

CAT-1004-01 Page 464 to 465

Concentrated 360° blast pattern with tungsten carbide internal throat componentsBuilt in tungsten venturi nozzle system for maximum abrasive accelerationFor internal pipe diameters: 19 mm (3/4") to 50 mm (2")

Wide 360° deflection blasting process with choice of tungsten or long life boron tipsHigh chrome machined exterior with long life wear resistant tungsten internal componentsFor internal pipe diameters: 50 mm (2") to 300 mm (12")

Revolutionary non-jamming venturi injector rotary seal for ultimate production uptimeUltra premium build quality with choice of standard or extended life blast nozzles For internal pipe diameters: 200 mm (8") to 1525 mm (60")

ConeBlast 1/4 InternalPipe Blaster

ConeBlast 1/2 Internal Pipe BlasterConeBlast 1/2 Less Carriage ConeBlast 1/2 Centering Carriage ConeBlast 1/2 with Carriage

Tornado Small Range Scissor Carriage

Tornado Mid Range Carriage Set

Tornado Mid Range Legs SetTornado Large

Range Carriage Set

Tornado Internal Pipe Blasting Tool Set

Tornado Tool Carriages

Tornado Large Range Legs Set

19 mm (3/4")

50 mm (2")

32 mm (1-1/4")

HEAVY DUTY

LIGHT DUTY

13PanBlastTM Closed Circuit Blasters are portable dust free blasting units operated by compressed air; and are available in compact light-duty suction blast and heavy-duty pressure blast variants. Both systems are suited for touch up blasting, weld seam blasting, roll repair / etching and plant maintenance.

AER85 Light Duty Closed Circuit Blaster

AER215 NuovoClosed Circuit Blaster

CLOSED CIRCUIT BLASTERS

Ergonomic “Hands-Free” lightweight handle operationMulti-pass ultra high efficiency cyclonic separatorFully adjustable abrasive reclaimer for all media typesPressure-hold Corsa II abrasive metering valveCartridge dust collector with reverse pulse jet cleaningLong life boron carbide venturi blast nozzle

Lightweight, compact and portableContinuous cycle blast & vacuum in single processCompressed air driven venturi vacuumSuitable for most abrasive media types

CAT-0801-01 Page 414 to 417

CAT-0802-01 Page 418 to 421

MEDIUM VOLUME

LOW VOLUME

PanBlastTM Abrasive Recycling Systems are designed for use with single or dual pressure blast pots. Cleaning of abrasives ensures maximum blasting productivity with less airborne dust released, and less wear and tear on associated components while achieving consistency in surface standard cleanliness and profiles.

Pow Air Vac AssemblyCAT-0901-01

Page 424 to 427

ProFlo Abrasive Recycling System

CAT-0902-01Page 428 to 431

Extended ProFlo Recycling System

CAT-0902-02Page 432 to 435

UltraFlo Abrasive Recycling System

CAT-0903-01Page 436 to 439

UltraFlo Extended Recycling System

CAT-0903-02Page 440 to 443

14

HIGH VOLUME

ABRASIVE RECYCLING SYSTEMS

Lightweight, compact and portableCompressed air driven via twin venturi ejectors10 m (33 ft) vacuum hose with abrasive pick up wandVacuum recovery capacity of 1,000 kg (2,200 lbs) per hour

Fully adjustable abrasive air wash system for all media typesMedia recycling rate of 3,000 kg (6,600 lbs) per hourSingle cartridge reverse pulse jet dust collectorSingle-phase electrical powerSuited for use with a single 200 liter (6 ft³) blast potOptional height extensions and storage hoppers Adaptable for use as a blast room sweep in recovery system

Fully adjustable abrasive air wash system for all media typesMedia recycling rate of 7,000 kg (15,400 lbs) per hourTwin cartridge reverse pulse jet dust collectorThree-phase electrical powerSuited for use with dual 200 liter (6 ft³) blast potsOptional height extensions and storage hoppers Adaptable for use as a blast room sweep in recovery system

15

LIGHT DUTY

PLASTIC MEDIA BLAST

CS34 Blast Cabinet - 110/230VACCAT-0601-01

Page 288 to 291


Page 292 to 295


Page 296 to 299

PB500ES Blast Cabinet AssemblyCAT-0601-04

Page 300 to 303

PB500SP Blast Cabinet AssemblyCAT-0601-05

Page 304 to 307

PB1000SP Blast Cabinet AssemblyCAT-0601-07

Page 308 to 311

PB1000PMB Blast Cabinet AssemblyCAT-0604-01

Page 344 to 347

PB1500PMB/AU Pressure Cabinet AssemblyCAT-0604-02

Page 348 to 351

BLAST CABINETSSelection of the appropriate blast cabinet size includes consideration for frequency of use, product mix, surface finish and size of products to be blasted. Both light and heavy-duty cabinets are available in multiple electrical supply options.

Light dutyKnocked down assemblyHobbyist entry-level model

Industrial-grade robust structureSock-type dust collectorMedium-duty applications

Industrial-grade robust structurePulse cartridge dust collectorMedium-duty applications

Medium dutySturdyIntermittent shop use entry-level model

Medium duty Three door accessIntermittent shop use model

Light and medium duty suction blast cabinet variants include CS34, CS37, CS48, PB500 and PB1000 sizes. These models are economical and work best with lightweight recyclable abrasive media.

Pressure media cabinet variants include PB1000 and PB1500 sizes. Both models feature steep angle cone, precision flow control valve, optional low-pressure dump valve for low pressure blasting to 35kPa (5psi) and are ideal for applications featuring delicate parts.

Industrial-grade robust structure Pulse cartridge dust collectorLow/high pressure blast capable Suitable for production line useCyclonic cleaning

PRESSURE BLAST

HEAVY DUTY

PB500HD Blast CabinetAssembly

CAT-0602-01Page 312 to 315


CAT-0602-02Page 316 to 319 PB2000HD Blast Cabinet

AssemblyCAT-0602-04

Page 324 to 327

PB500P Blast CabinetAssembly

CAT-0603-01Page 328 to 331

PB1000P/AU/NZ/SG Pressure Cabinet Assembly

CAT-0603-02Page 332 to 335

PB1500P/AU/NZ/SG Pressure Cabinet Assembly

CAT-0603-03Page 336 to 339

PB2000P Blast Cabinet Assembly

CAT-0603-04Page 340 to 343


CAT-0602-03Page 320 to 323

Dual station industrial-grade robust structureCyclonic cleaningPulse cartridge dust collectorSuitable for production line use with extended length parts

Dual Station industrial-grade robust structureHigh impact blastingCyclonic cleaningPulse cartridge dust collectorSuitable for production line use with extended length parts

Pressure blast cabinet variants include PB500, PB1000, PB1500 and PB2000 sizes. These models work with all recyclable abrasive media, feature excellent media cleaning and are ideal for applications requiring surface profiles.

Heavy-duty suction blast cabinet variants include PB500, PB1000, PB1500 and PB2000 sizes. These models work best with lightweight recyclable abrasive media and feature excel-lent media cleaning.

Industrial-grade robust structurePulse cartridge dust collectorCyclonic cleaningSuitable for production line use

Industrial-grade robust structure High impact blasting Cyclonic cleaning Pulse cartridge dust collectorSuitable for production line use

DELTA SNH MANUAL

DELTA GDF MANUAL

DELTA GDF AUTOGENERIC

16The PanBlastTM range of blast cabinet parts consists of a variety of suction blast guns and cartridge filters that can be used in both PanBlastTM blast cabinets and generic third-party blast cabinets, in both manual and automatic configurations.

BLAST CABINET PARTS

Ergonomic, lightweight design for reduced operator fatigueHardened steel air tip for longer service lifeAluminum jacketed, tungsten carbide nozzlesMounting lug for manual gun stand attachment

Ergonomic, lightweight design for more efficient mounting and manipulationCase hardened steel air tip for longer service lifeAluminum jacketed, tungsten carbide blast nozzlesMounting lug for quick attachment to bracket and/or manipulatorOptional hardened heavy-duty air tip available

Ergonomic, lightweight design for reduced operator fatigueHardened steel air tip for longer service lifeAvailable with either boron carbide or ceramic blast nozzleMounting lug for gun stand attachment

Ergonomic unibody design ideal for manual cabinetsEconomical ceramic nozzles supplied standard

CAT-1201-07 Page 566 to 567

CAT-1201-01 Page 568 to 571

CAT-1201-03 Page 576 to 579

CAT-1201-02 Page 572 to 575

CS48 Gun Assembly

Delta-M5 mm Boron Nozzle

Delta-A CS1/8 x 1/4

Delta-M GDF3/32 x 1/4

Delta-M CS1/8 x 1/4



Delta-A GDF3/32 x 1/4



Delta-M SNH3/32 x 3/16






DELTA SNH AUTO

GODFREY SUCTION

OMEGA SUCTION

FILTER CARTRIDGES

Durable double pleated cellulose/polyester mediaMERV13 filtration efficiencyEither bands or metal cages to keep fabric media intact during pulse cleaningRubber gasket sealing for open endsCustom sizes and design upon request

Ergonomic, lightweight design for more efficient mounting and manipulationCase hardened steel air tip for longer service lifeOptional hardened heavy-duty air tip availableAvailable with either boron carbide or ceramic blast nozzlesMounting lug for quick, simple attachment to bracket and/or manipulator

Economical ceramic nozzles supplied standardFor use in both manual and automated blast cabinetsOptional ultra long life boron carbide nozzles

Conventional heavy-duty design ideal for manual cabinetsLong life nozzle injector tips and tungsten nozzles to suit application

CAT-1201-04 Page 580 to 583

CAT-1201-05 Page 584 to 587

CAT-1201-06 Page 588 to 591

CAT-1202-01 Page 592 to 593

Omega9 mm Boron Nozzle

Omega6.4 mm Ceramic Nozzle



Omega6 mm Boron Nozzle

Godfrey3/32 x 3/16

Delta-A5 mm Boron Nozzle

Delta-A SNH3/32 x 1/4






Godfrey1/16 x 3/16

Godfrey1/8 x 1/4

Godfrey3/16 x 3/8

Godfrey1/4 x 1/2

Godfrey1/8 x 3/8

Size 1(Open/Close)

Size 2(Open/Close)

Size 2(Open/Open)

Size 3(Open/Close)

Size 5(Open/Open)

Size 6(Open/Close)

Size 7(Open/Open)

Size 7(Open/Close)

Size 4(Open/Open)

SPRAY TIPS SERVICE KITS

AIRLESS HOSES

SPRAY GUNS

STANDARD PUMPS

17PanBlast™ Airless Spray Pumps are available in several standard sizes to suit different application requirements and coating specifications. All pump sizes share two standard gun styles and multiple spray tips.

AIRLESS PAINTING SYSTEMS

Top quality high-pressure air and paint supply hoses for use with Airless Spray Pumps

Standard flat tips or RAC switch tips For easy plug-and-play replacement of common wear items

CAT-1101-01 Page 462 to 463

CAT-1101-01 Page 462 to 463

CAT-1101-01 Page 462 to 463


Portable design and rugged framePump ratios of 30:1, 45:1, 63:1, 68:1 and 73:1

HP Spray Gun for use with low and medium viscosity coatings up to 500 bar (7,250 psi)Four Finger Spray Gun for use with medium and high viscosity coatings up to 700 bar (10,150 psi)

30:1Airless Spray Pump

HP Spray Gun

1/4" X 15 MAirless Paint Hose

RAC X Switch Tip Range

RAC 5 Switch Tip Range

XHD Switch Tip Range

Contractor Flat Tip Range

Standard Flat Tip Range

DisplacementPump Repair Kit

Air Motor Repair Kit

3/8" X 15 MAirless Paint Hose

3/8" X 15 MAirless Paint Hose WhipLine 430 Bar

4 Finger Blue Gun





Paint Hose Whip Line 430 Bar

1/4" X 2 M

VANES IMPELLERS

LINERS

CONTROL CAGES

18PanBlast™ Blast Wheel Parts are manufactured using chrome molybdenum alloy via both lost wax investment casting and conventional sand casting processes, with the former providing a superior surface finish and enhanced durability. The parts are then heat treated to achieve surface hardness of up to 65 HRC.

BLAST WHEEL PARTS

Plug and play retrofit of parts to existing equipmentHigh quality, low porosity castings with excellent surface finishExtended parts durability from heat-treated alloy



CAT-1801-01 Page 600 to 601

CAT-1801-01 Page 600 to 601



Documents

panblast.com · Fina Valve 1" F X 1-1/2" M Assembly Abrasive metering valves are used to control media feed rate from the blast pot storage hopper into the blast hose pusher line,