Files%5c0con 133

Embed Size (px)

Citation preview

  • 8/6/2019 Files%5c0con 133

    1/4

    Date prepared: 22 March 1999

    Material Safety Data Sheet ETHANE DIOL

    Date revised: December 2008

    Material Safety Data Sheet for ETHANE DIOL Page 1 of 4

    0CON-133

    1. Identification of the Substance/Preparation and the Company/

    Undertaking

    2. Composition

    3. Hazards Identification

    4. First Aid Measures

    Substance or preparation trade

    name:

    Ethane Diol

    Unique reference number(s): 0CON-133

    Company/undertaking name &

    address:

    Logitech Ltd.,Erskine Ferry Road, Old Kilpatrick, GlasgowG60 5EU, Scotland, UK

    Telephone: (+44) 1389 875444

    Emergency telephone number: As above

    Substance: Organic solvent

    EC -No: 203-473-3

    CAS number: 107-21-1

    Harmful if swallowed

    Inhalation: Remove from exposure, rest and keep warm. Insevere cases, obtain medical attention.

    Skin contact: Wash off skin thoroughly with water. Remove

    contaminated clothing and wash before re-use. Insevere cases, obtain medical attention.

    Eye contact: Irrigate thoroughly with water for at least 10 minutes.If discomfort persists, seek medical attention.

    Ingestion: Wash out mouth thoroughly with water and giveplenty of water to drink. Obtain medical attention.

  • 8/6/2019 Files%5c0con 133

    2/4

    Date prepared: 22nd March 1999

    Material Safety Data Sheet for ETHANE DIOL Page 2 of 4

    Material Safety Data SheetETHANE DIOL

    0CON-133Date revised: December 2008

    5. Fire-Fighting Measures

    6. Accidental Release Measures

    7. Handling and Storage

    8. Exposure Controls

    Suitable extinguishing media: Water spray, foam, dry powder or carbon dioxide

    Special exposure hazards in fire: None established

    Required special protective

    equipment for fire-fighters:

    N/A

    Personal precautions: Wear appropriate protective clothing.

    Methods for cleaning: If regulations permit, mop up with water and run towaste, diluting greatly with running water. Otherwise

    absorb on an inert absorbent, transfer to containerand arrange removal by disposal company. Ventilatearea to dispel residual vapour. For large spillagesliquids should be contained with sand or earth andboth liquids and solids transferred to salvagecontainers. Any residues should be treated as forsmall spillages.

    Handling: Usual precautions for flammable liquids should betaken.

    Storage: Store at room temp. (15 to 25C recommended). Keepwell closed and protected from direct sunlight andmoisture.

    Exposure control limits, and source: As appropriate to quantity handledUK exposure limits: OES. long-term, mg/m3: 10 -

    Ethane-1,2-diol, particulateRespiratory protection: Use self-contained breathing apparatus

    Hand protection: Use nitrile gloves

    Skin protection: Plastic apron, sleeves, boots - if handling largequantities.

    Eye protection: Chemical splash goggles, face shield.

  • 8/6/2019 Files%5c0con 133

    3/4

    Date prepared: 22nd March 1999

    Material Safety Data Sheet for ETHANE DIOL Page 3 of 4

    Material Safety Data SheetETHANE DIOL

    0CON-133Date revised: December 2008

    9. Physical and Chemical Properties

    10. Stability and Reactivity

    11. Toxicological Information

    12. Ecological Information

    Appearance: Colourless liquid.

    Odour: Almost odourless.

    Boiling point: >197C

    Melting point: -13C

    Density (g/ml): 1.11

    Flashpoint (C): 116.1C / 241F

    Explosion limits, lower:

    Explosion limits, upper:

    1.8%13%

    Ignition temperature: 410C

    Vapour pressure:- Density:

    1mm Hg, 54C2.14

    Solubility in water: Miscible in all proportions

    Stability: Stable

    Materials to avoid: Strong oxidising agents, aluminium, chromylchloride, alkali hydroxides, perchloric acid.

    After eye contact: irritant effect, mucosal irritationAfter skin contact: irritant effect. Danger of skin absorptionAfter ingestion: agitation, CNS disordersSystemic effect: After a latency period: tiredness, ataxia (impaired locomotercoordination), unconsciousness. Damage to: kidneys.

    Further data: LD50 4700mg/kg oral, rat.No evidence of carcinogenic properties. Evidence of reproductive effects

    No environmental hazard is anticipated provided that the material is handled anddisposed of with due care and attention.

  • 8/6/2019 Files%5c0con 133

    4/4

    Date prepared: 22nd March 1999

    Material Safety Data Sheet for ETHANE DIOL Page 4 of 4

    Material Safety Data SheetETHANE DIOL

    0CON-133Date revised: December 2008

    13. Disposal Considerations

    14. Transport Information

    15. Regulatory Information

    16. Other Information

    The data contained in this Safety Data Sheet has been supplied as required by the Chemicals

    (Hazard Identification and Packaging) Regulations 1993, as amended, for the purpose of

    protecting the health and safety of industrial and commercial users who are deemed capable ofunderstanding and acting on the information provided.

    Chemical residues are generally classified as special waste, and as such are covered by

    regulations which vary according to location. Contact your local waste disposalauthority for advice. or pass to a chemical disposal company. Rinse out emptycontainers thoroughly before returning for recycling.

    UN-No: IMDG class: NRIMO: NR Packaging groupIATA: NR Packaging groupCorrect technical name: NOT RESTRICTEDADR/RID: NIR

    Labelling: According to EC directives

    Symbol: Xn - Harmful

    R-phrases: R22

    Harmful if swallowed

    S-phrases: S2

    Keep out of reach of children

    EC-No: 203-473-3

    NOTE: THIS DATA SHEET DOES NOT CONSTITUTE A USERS ASSESSMENT OF

    WORKPLACE RISK AS REQUIRED BY HSW ACT, COSHH, MANAGEMENT OF

    HEALTH AND SAFETY AT WORK REGULATIONS, OR OTHER HEALTH AND SAFETY

    LEGISLATION.

    Recommendations/restrictions: The user must be instructed in the proper workprocedure and be familiar with the contents of theseinstructions.

    Use: For use with silicon carbide and aluminium oxidepowders when processing water soluble materials.

    Abbreviations: N/E: Not establishedN/A: Not available