Embed Size (px)
Citation preview
FIGURE 12-1
Excess air temperature curve.
FIGURE 12-2
HCl/Cl2 equilibrium.
FIGURE 12-3
Adiabatic emperature versus heating value at various percentages of excess air.
FIGURE 12-5
Flame temperature versus excess air.
FIGURE 12-6
Flare tip used for combustion of waste gases that are above HEL.
FIGURE 12-7
Thermal VOC incinerator.
FIGURE 12-8
Regenerative VOC incinerator.
FIGURE 12-9
Burning time for atomized droplets.
FIGURE 12-10
Internal mix nozzle.
FIGURE 12-11
External mix atomizer.
FIGURE 12-12
High intensity burner.
FIGURE 12-13
Down-fired combustor.
FIGURE 12-14
Rotary kiln incinerator.
FIGURE 12-15 Fixed hearth incinerator.
FIGURE 12-16
Multiple-hearth incinerator.
FIGURE 12-17
Fluidized incinerator.
FIGURE 12-18
Fluid-bed incinerator types.
FIGURE 12-19
Rotary kiln with vertical secondary combustion chamber.
FIGURE 12-20
Partial elevation of an incinerator.
FIGURE 12-21
Hydraulic ram feeder.
FIGURE 12-22
Waste heat boiler.
FIGURE 12-23
Dry/dry APC.
FIGURE 12-24
Wet/dry APC.
FIGURE 12-25
Venturi scrubber.
FIGURE 12-26
Calvert collision scrubber.
FIGURE 12-28
Ionizing wet scrubber.
FIGURE 12-29
Entrainment separators.
FIGURE 12-30
Mobile (transportable) incinerator.
