2016년 개정된) 총탄화수소의 공정시험법과 완벽하게 일치하며, 전세계에서

가장 가볍고, Low Cost 하며 NMHC Docking 을 별도로 사용하지 않고, THC, CH4 와 NMHC 을

분리측정 할 수 있으며, 또한 산소(O2) 농도와 상관없이 THC 을 실시간 측정분석 할 수 있으며

hot-FID GC 로서 CH2O, BTEX 등도 동시에 측정 할 수 있는 진정한 Portable hot - THC Analyzer

총탄화수소분석기 FID 9000입니다

FID 9000_ Specifications Made in Italy

Measurement THC ,CH4, NMHC / TVOC

Technology

Hot FID – Flame Ionisation Detection

Catalytic separation of the Methane fraction

Range

0-20/100/200/500/1,000/5,000/10,000 ppm and/or mg/Nm3

Other Ranges please consult

Accuracy ± 0.5% of full scale

Background noise 0.1ppm (0.2 mg/Nm3)

Lower Detectable

Limit0.2ppm (0.4 mg/Nm3)

Drift

Zero ± 0.5 % of full scale

Span ± 0.5% of full scale

Response time 1 sec to 98% full scale deflection

Linearity Better than 0.5%

Sample flow rate 800 ml/min

Data storage 4GB or compact flash card & USB port (min.1 sec unit) & Data Acquisition System

Digital display 320 x 200 pixel 5.5” colour TFT-LCD video graphic display

Serial output USB port (Ethernet, RS 232 or RS 485 as option)

Operating

temperature0 – 40 ℃

Analogue outputs

Printer

0 – 10 Vdc, 4 – 20 mA (optional)

Printer management allows you to use the printer by USB port (optional)

Services

Hydrogen : IP 25 ml/min from external gas cylinder

Air : 200 ml/min, from in built generator

Dimensions

Weight

Sampling probe

Sampling line

Carrying case

370 x 210 x 270 mm

7.2 kg

300mm,700mm,1000mm (request .length)

- SS sampling probe with up to 180℃ sampling tube 3m, when sampling from stacks

- Heated filter SS sampling probe up to 180℃ with up to 180℃ sampling tube 3m

Mini cylinder basket (two positions) & Built in + Hydrides

Solid state hydride tank add H2 source (option)

Reinforced aluminium box with carrying strip

Model. FID 9000 GC is a versatile portable FID based gas chromatograph (GC) particularlysuitable to monitor special hydrocarbons both for stack and environmental monitoring.Its versatility includes:i) pre configured program MMC card, by changing the recipe the instrument performs different

analysisii) a powerful data card in which all the working conditions as well as the measured data are

recorded;iii) here below some of the more frequent measurements performed by FID 9000 GC as option

Species Minimum Range Sensitivity Applications

Methane/NMHC 0 - 10 ppm 0.1 ppm Stack emissions

Field controls on continuous NMHC

analysers

Auditing

Styrene + Acetone 0-100 ppm 1 ppm Fibber glass manufacturers (boats,

cabinets etc.)

Halogenated HC

Three-chloro- ethane,

di-chloro-ethylene,

tetra-chloro-ethylene

0-100 ppm 1 ppm Industrial plant

Benzene and Toluene 0-10 ppm 0.1 ppm Petrol plants

Petrol stocks

Stack emissions

Gas station controls

Ground pollution

Ethylene oxide

and Propylene oxide

0-10 ppm 0.1 ppm Sterilised environment

Fruit stocks

Ethyl acetate 0-100 ppm 1 ppm Pilot plant

Printing plants

Acetic acid 0-100 ppm 1 ppm Industrial plant

Meta-xylene

(Three methyl benzene)

0-10 ppm 0.1 ppm Industrial plant emission

Ethyl and propyl alcohols % level Fraction of % L.E.L (Low Explosion Limit)

measurements

Formaldehyde

(CH2O)

0-20 ppm 0,2 ppm Industrial plant

Plastic industries

Wood industries

Industrial hygiene

THC Analyzer 세일국제무역 02-837-6974 info@eurotron.co.kr www.rbr.co.kr

Heated dust filter SS sampling probe up to 180℃ with up to 180℃ sampling tube 3m (add. line length)

SS sampling probe on top dust filter with up to 180℃ sampling tube 3m, when sampling from stacks