1

FIBERTESTING

2 F i b e r s

F025A Microscopy Cross Section Kit

F102/A Lint and Trash Analyzer MK2

Contains all the equipment and consumables used in making fiber and yarn cross sections by the plate and modified cork methods recommended by AATCC.

Lint and Trash Analyzer MK2 (Cotton Model). To determine lint, trash and dust content within a sample of cotton fiber up to 100 grams. Also used to determine non-fiber content of synthetic fibers and to open and clean fibers for further testing. The analyzer uses the carding principle with air separation of lint and non-lint content.

Lint and Trash Analyzer MK2 (Wool Model). To determine vegetable and other foreign matter content in raw wool. Wool tops and waste and preparation of samples for fineness testing. Also suitable for determining the yield of high value fibers such as cashmere and angora, as well as determining non-fiber content of long staple synthetic fibers.

ORDERING INFORMATION

202159 Microscopy Cross Section Kit

202758 Dissecting/Pick Counting Needles with Handle (Pack of 12)

STANDARDS:

AATCC20

STANDARDS:

ITMF

SIZEWEIGHT 1 kg / 2.2 lbs

DIMENSIONS 200 mm (w) x 150 mm (d) x 100 mm (h) /8 in (w) x 6 in (d) x 4 in (h)

SIZEWEIGHT 100 kg / 220 lbs

DIMENSIONS 750 mm (w) x 1000 mm (d) x 600 mm (h) / 30 in (w) x 40 in (d) x 24 in (h)

ORDERING INFORMATION202586 Lint and Trash Analyzer (Cotton Model)

200770 Lint and Trash Analyzer MK2 (Wool Model)

203634 Primary Filter Assembly

203635 Secondary Filter Assembly

w w w . s d l a t l a s . c o m 3

Precision Fiber Microtome F214

STANDARDS:

AATCC20

To produce fiber cross sections of microscopic examination, measurement and identification.

To determine the tensile strength of natural fibers. Includes 1 pair of clamps and spacer, torque vice and wrench, cutter, comb and tweezers. A 5 mg x 0.01 mg capacity balance is required but not included.

Hand operated, to determine the linear density (count) of slivers and rovings. Fitted with roving bobbin stand, digital counter and precision cutter. Specify 1 meter or 1 yard circumference.

ORDERING INFORMATION

105217 Precision Fiber Microtome

SIZEWEIGHT 3 kg / 6.6 lbs

DIMENSIONS 75 mm (w) x 150 mm (d) x 100 mm (h) /3 in (w) x 6 in (d) x 4 in (h)

SIZE

WEIGHT 3.2 kg / 7 lbs

DIMENSIONS 330 mm (w) x 100 mm (d) x 125 mm (h) /13 in (w) x 4 in (d) x 5 in (h)

SIZE

WEIGHT 20 kg / 45 lbs

DIMENSIONS 280 mm (w) x 430 mm (d) x 600 mm (h) / 11 in (w) x 17 in (d) x 24 in (h)

ORDERING INFORMATION

104008 Pressley Fiber Bundle Strength Tester

104009 Clamps & Spacer (1 pair)

104010 Leather Clamp Facings (pack of 30)

ORDERING INFORMATION

300059 Sliver and Roving Reel Meter

300060 Sliver and Roving Reel Yard

Sliver and Roving Reel F216A

STANDARDS:

ISO137 BS 2043 ASTM D2130 Woolmark TM 24 GB 10685

STANDARDS:

ASTM D1445 ASTM D2524 BS 5116 ISO 3060

Pressley Fiber Bundle Strength Tester F215

4 F i b e r s

F217A/B/C Rapid Oil Extraction Apparatus

F256A Moisture Regain Oven

To determine the oil or finish content of wool or syn-thetic samples by solvent percolation and evaporation. Suitable for fiber, yarn or fabric. Available with 1, 2 or 3 extraction units. To be fully compliant with Edana method ERT 155, it needs a large extraction tube- 12 mm (OD), 10 mm (ID). (Full title of new method is: DETERMINATION OF ACETONE EXTRACTABLE FINISH ON NONWOVENS).

To determine the moisture content and regain percent-age of textile materials. Drying is performed by circu-lation of warm air electrically heated, regulated by an electronic temperature controller (range 0°/180°C, ac-curacy ±1°C). The material to be tested is dried within a metal container suspended from an electronic balance. Two successive weights of the same value determine the point at which moisture content can be calculated. Includes an electronic balance with 2100 g capacity and 0.01 g accuracy. The sample is weighed automatically by means of a basket connected to the balance.

ORDERING INFORMATION

105265 Rapid Oil Extraction Apparatus Single

105266 Rapid Oil Extraction Apparatus Double

105267 Rapid Oil Extraction Apparatus Triple

105268 Foil Residue Trays (Pack of 50)

SIZEWEIGHT 4.4 kg / 9.7 lbs

DIMENSIONS 170 mm (w) x 170 mm (d) x 380 mm (h) /7 in (w) x 7 in (d) x 15 in (h)

SIZEWEIGHT 130 kg / 286 lbs

DIMENSIONS 1000 mm (w) x 700 mm (d) x 1280 mm (h) / 40 in (w) x 28 in (d) x 54 in (h)

ORDERING INFORMATION300064 Moisture Regain Oven

STANDARDS: ASTM D2564 BS 4784 ISO 6741