Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
R2Architects110Kresson‐GibbsboroRoadSuite8Voorhees,NewJersey08043856‐566‐1515
FFESPECIFICATIONBOOK
ChamberlainStudentCenter
BallroomRefurbishment
IssueDate:February6,2016(bidissue)
R2AProject#:18625.01
Specification Listing
Project: Chamberlain Student Center - Ballroom
18625.01Project#:
2/6/2019
ACC-101 Trash Urns 2/6/2019As Noted
B-101 Bullnose Tile Base 2/6/2019Bathrooms
CPT-101 Printed Broadloom Carpet 2/6/2019As Noted
CPT-102 Printed Broadloom Carpet 2/6/2019As Noted
CPT-103 Printed Broadloom Carpet 2/6/2019As Noted
CPT-104 Carpet Tile 2/6/2019Coat Room
DL-101 Chandelier 2/6/2019Ballroom
DL-102 Ceiling Fixture 2/6/2019Pre-Function
DL-103 Ceiling Fixture 2/6/2019Pre-Function
DL-104 Wall Sconce 2/6/2019Ballroom
DL-105 Wall Sconce 2/6/2019Pre-Function
DR-101 Drapery with DR-103 2/6/2019Ballroom
DR-102 Drapery with DR-104 2/6/2019Pre-Function
DR-103 Drapery with DR-101 2/6/2019Ballroom
DR-104 Drapery with DR-102 2/6/2019Pre-Function
FAB-101 Fabric at Wrapped Panels 2/6/2019Ballroom
FAB-102 Upholstery Fabric 2/6/2019SG-101, SG-102, SG-103
PT-101 Paint 2/6/2019As Noted
PT-102 Paint 2/6/2019As Noted
SG-101 Banquet Chair 2/6/2019Ballroom
SG-102 Stage Chair 2/6/2019Ballroom
SG-103 Stage Chair 2/6/2019Ballroom
WC-101 Wallcovering 2/6/2019Pre-Function
WC-102 Wallcovering 2/6/2019Bathrooms
LocationItem Name Issue Date Date
Revision
#Item #
Page 1
ACC-101: Trash Urns B-101: Bullnose Tile Base
CPT-101: Printed Broadloom Carpet CPT-102: Printed Broadloom Carpet
Chamberlain Student Center - Ballroom Refurbishment ACC-101 - WC-102
Page 1 of 3 2/6/2019R2Architects, LLC
CPT-103: Printed Broadloom Carpet CPT-104: Carpet Tile
FAB-102: Upholstery Fabric PT-101: Paint
Chamberlain Student Center - Ballroom Refurbishment ACC-101 - WC-102
Page 2 of 3 2/6/2019R2Architects, LLC
PT-102: Paint SG-102: Stage Chair
SG-103: Stage Chair WC-102: Wallcovering
Chamberlain Student Center - Ballroom Refurbishment ACC-101 - WC-102
Page 3 of 3 2/6/2019R2Architects, LLC
Accessories
Location: As Noted
Issue Date: 2/6/2019 Revision Date:
Revision No.:
Item# ACC-101
Manufacturer Rep Firm
Global Industrial www.globalindustrial.com11 Harbor Park Drive Port Washington, NY 11050USAPh: 1-888-978-7759 Fax: 1-888-381-2868 [email protected]
Description
Notes:
Trash ReceptacleConstruction: Galvanized Steel/AluminumStyle: Funnel TopCapacity: 33 Gallons
ALL QUANTITIES TO BE VERIFIED BY PURCHASING AGENT AND OR CLIENT REPRESENTATIVE. OWNER TO DETERMINE ADDITIONAL ATTIC STOCK IF APPLICABLE. MFGR IS REQUIRED TO SUBMIT A FULL SET OF SHOP DRAWINGS AND ALL FINISH SAMPLES TO R2A FOR REVIEW AND APPROVAL PRIOR TO PURCHASING AND PRODUCTION.
ALL MATERIALS USED MUST MEET OR EXCEED ALL APPLICABLE FEDERAL, STATE, AND LOCAL FIRE CODE REQUIREMENTS.
Glaro 33 Gallon Waste Receptacle w/Funnel Top, Bronze Vein - F2051-BV-BVItem
Color/Finish Bronze Vein
Dimensions 20"Dia x 35"H
Location Throughout
Item: Trash Urns
Model No.: T9CB1903123
$0.00
Quantity:
Unit Cost:
Ext. Cost:
EachUnits:
Issued By: scorso
Item# ACC-101
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Wall Base and Trim
Location: Bathrooms
Issue Date: 2/6/2019 Revision Date:
Revision No.:
Item# B-101
Manufacturer Rep Firm
Daltile2030 Springdale Road Cherry Hill , NJ 08003Contact: Rachael Fernbach [email protected] Ph: 610-357-7152
Description
Notes:
ADD ALTERNATE #1Bull Nose Tile Base
Grout: Laticrete Natural Grey #24
All quantities to be verified by purchasing agent / contractor. Owner to determine additional attic stock. Install per R2A drawings. Installer is required to field verify total quantity required prior to purchasing. Manufacturer sample required prior to purchasing.
Must be contract quality and suitable for heavy commercial use. All materials must meet or exceed all applicable federal, state and local fire code requirements.
Affinity CollectionItem
Color Cream
Dimensions
Location
3" x 12"
Bathrooms
Item: Bullnose Tile Base
Model No.: P-43C9
$0.00
Quantity:
Unit Cost:
Ext. Cost:
Units:
Issued By: scorso
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Item# B-101
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Carpet
Location: As Noted
Issue Date: 2/6/2019 Revision Date:
Revision No.:
Item# CPT-101
Manufacturer Rep Firm
Milliken Flooring www.millikencarpet.comPh: 800.528.8453Contact: Megan Luciano Negab,[email protected]: 609.354.8153
Description
Notes:
Custom Printed Broadloom Carpet
Stain and Soil Protectant: StainSmartMold / Mildew Odor Control: AlphaSan Built-In ProtectionBleach Resistance: ColorSeal
Note: Design / pattern pending owner approval, see plan for carpet location and extentSee finish plan for coordinating solid color border(s)
Manufacturer to provide seaming diagram.
1. Manufacturer required to submit strike-off sample to designer prior to production.2. Installer to verify appropriate seaming and pattern matching with manufacturer.3. Carpet must be solution dyed nylon with a minimum face weight of 32 oz for use in guest rooms and a minimum face weight of 36 oz for use in corridors.4. Refer to finish plan and finish schedule in construction documents for locations for carpet.5. Installer to verify yardage requirements prior to carpet order.6. Manufacturer to submit flame certificate to Agent.7. Carpet must meet all applicable local, state, and federal fire codes of final destination location.8. Carpet must be first quality goods from a single dyelot, shipped in the largest roll size possible. No seconds, no ends.9. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.10. Refer to Front End for terms, conditions, abbreviations, definitions, responsibilities, and general guidelines for all specified items.11. Submittal of shop drawings, finish samples, and/or prototype to R2A design team for review and written approval is required for any item supplied by a vendor other than the specified source.12. Verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.NOTE: Purchasing agent to establish adequate “Attic Stock” quantity desired. Quantity is to be ordered with original net order and shall be side-marked “Attic Stock”.
Description: Custom Printed Broadloom Carpet - 00988547 " Ballroom Outfill 1A"Design: P078F16DPE / *P078F16DPE-A19001*
Item
Color Colorway: 31JM
Construction Tufted, Patterned Cut Pile
Weight Tufted Face Weight: 36 oz/sq yd
Gauge Tufting Gauge: 1/10
Repeat 10.80"W x 10.80"L
Content
Rows Per Inch
Primary Backing
Dye Method: Digital Millitron Dye InjectionFace Fiber: Miliken WearOn BCF Nylon Type 6,6
Stitches: 11.3 inches
Primary Backing: Synethic WovenSecondary Backing: Synthetic Endura-Loc
Tred-Mor 2568, 68 ozUse: Heavy Commercial
Carpet Pad
Flooring Radiant Panel
Location
ASTM E 668 Class 1
As Noted
Item: Printed Broadloom Carpet
$0.00
Quantity:
Unit Cost:
Ext. Cost:
Units:
Issued By: scorso
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
are for general design intent and reference only.10. Refer to Front End for terms, conditions, abbreviations, definitions, responsibilities, and general guidelines for all specified items.11. Submittal of shop drawings, finish samples, and/or prototype to R2A design team for review and written approval is required for any item supplied by a vendor other than the specified source.12. Verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.NOTE: Purchasing agent to establish adequate “Attic Stock” quantity desired. Quantity is to be ordered with original net order and shall be side-marked “Attic Stock”.
Item# CPT-101
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Carpet
Location: As Noted
Issue Date: 2/6/2019 Revision Date:
Revision No.:
Item# CPT-102
Manufacturer Rep Firm
Milliken Flooring www.millikencarpet.comPh: 800.528.8453Contact: Megan Luciano Negab,[email protected]: 609.354.8153
Description
Notes:
Custom Printed Broadloom Carpet
Stain and Soil Protectant: StainSmartMold / Mildew Odor Control: AlphaSan Built-In ProtectionBleach Resistance: ColorSeal
Note: Design / pattern pending owner approval, see plan for carpet location and extentSee finish plan for coordinating solid color border(s)
Manufacturer to provide seaming diagram.
1. Manufacturer required to submit strike-off sample to designer prior to production.2. Installer to verify appropriate seaming and pattern matching with manufacturer.3. Carpet must be solution dyed nylon with a minimum face weight of 32 oz for use in guest rooms and a minimum face weight of 36 oz for use in corridors.4. Refer to finish plan and finish schedule in construction documents for locations for carpet.5. Installer to verify yardage requirements prior to carpet order.6. Manufacturer to submit flame certificate to Agent.7. Carpet must meet all applicable local, state, and federal fire codes of final destination location.8. Carpet must be first quality goods from a single dyelot, shipped in the largest roll size possible. No seconds, no ends.9. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.10. Refer to Front End for terms, conditions, abbreviations, definitions, responsibilities, and general guidelines for all specified items.11. Submittal of shop drawings, finish samples, and/or prototype to R2A design team for review and written approval is required for any item supplied by a vendor other than the specified source.12. Verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.NOTE: Purchasing agent to establish adequate “Attic Stock” quantity desired. Quantity is to be ordered with original net order and shall be side-marked “Attic Stock”.
Description: Custom Printed Broadloom Carpet - 00988547 " Ballroom Outfill 1A"Design: P078F16DPE / *P078F16DPE-A19001*
Item
Color Colorway: 31JM
Construction Tufted, Patterned Cut Pile
Weight Tufted Face Weight: 36 oz/sq yd
Gauge Tufting Gauge: 1/10
Repeat 6.00"W x 15.00"L
Content
Rows Per Inch
Primary Backing
Dye Method: Digital Millitron Dye InjectionFace Fiber: Miliken WearOn BCF Nylon Type 6,6
Stitches: 11.3 inches
Primary Backing: Synethic WovenSecondary Backing: Synthetic Endura-Loc
Tred-Mor 2568, 68 ozUse: Heavy Commercial
Carpet Pad
Flooring Radiant Panel
Location
ASTM E 668 Class 1
As Noted
Item: Printed Broadloom Carpet
$0.00
Quantity:
Unit Cost:
Ext. Cost:
Units:
Issued By: scorso
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
9. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.10. Refer to Front End for terms, conditions, abbreviations, definitions, responsibilities, and general guidelines for all specified items.11. Submittal of shop drawings, finish samples, and/or prototype to R2A design team for review and written approval is required for any item supplied by a vendor other than the specified source.12. Verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.NOTE: Purchasing agent to establish adequate “Attic Stock” quantity desired. Quantity is to be ordered with original net order and shall be side-marked “Attic Stock”.
Item# CPT-102
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Carpet
Location: As Noted
Issue Date: 2/6/2019 Revision Date:
Revision No.:
Item# CPT-103
Manufacturer Rep Firm
Milliken Flooring www.millikencarpet.comPh: 800.528.8453Contact: Megan Luciano Negab,[email protected]: 609.354.8153
Description
Notes:
Custom Printed Broadloom Carpet
Stain and Soil Protectant: StainSmartMold / Mildew Odor Control: AlphaSan Built-In ProtectionBleach Resistance: ColorSeal
Note: Design / pattern pending owner approval, see plan for carpet location and extentSee finish plan for coordinating solid color border(s)
Manufacturer to provide seaming diagram.
1. Manufacturer required to submit strike-off sample to designer prior to production.2. Installer to verify appropriate seaming and pattern matching with manufacturer.3. Carpet must be solution dyed nylon with a minimum face weight of 32 oz for use in guest rooms and a minimum face weight of 36 oz for use in corridors.4. Refer to finish plan and finish schedule in construction documents for locations for carpet.5. Installer to verify yardage requirements prior to carpet order.6. Manufacturer to submit flame certificate to Agent.7. Carpet must meet all applicable local, state, and federal fire codes of final destination location.8. Carpet must be first quality goods from a single dyelot, shipped in the largest roll size possible. No seconds, no ends.9. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.10. Refer to Front End for terms, conditions, abbreviations, definitions, responsibilities, and general guidelines for all specified items.11. Submittal of shop drawings, finish samples, and/or prototype to R2A design team for review and written approval is required for any item supplied by a vendor other than the specified source.12. Verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.NOTE: Purchasing agent to establish adequate “Attic Stock” quantity desired. Quantity is to be ordered with original net order and shall be side-marked “Attic Stock”.
Description: Custom Printed Broadloom Carpet - 00988548 "Rug Infield 1A"Design: P0788P4DPE / *P0788P4DPE-A19001*
Item
Color Colorway: 31JM
Construction Tufted, Patterned Cut Pile
Weight Tufted Face Weight: 36 oz/sq yd
Gauge Tufting Gauge: 1/10
Repeat 81.00"W x 81.00"L
Content
Rows Per Inch
Primary Backing
Dye Method: Digital Millitron Dye InjectionFace Fiber: Miliken WearOn BCF Nylon Type 6,6
Stitches: 11.3 inches
Primary Backing: Synethic WovenSecondary Backing: Synthetic Endura-Loc
Tred-Mor 2568, 68 ozUse: Heavy Commercial
Carpet Pad
Flooring Radiant Panel
Location
ASTM E 668 Class 1
As Noted
Item: Printed Broadloom Carpet
$0.00
Quantity:
Unit Cost:
Ext. Cost:
Units:
Issued By: scorso
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
9. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.10. Refer to Front End for terms, conditions, abbreviations, definitions, responsibilities, and general guidelines for all specified items.11. Submittal of shop drawings, finish samples, and/or prototype to R2A design team for review and written approval is required for any item supplied by a vendor other than the specified source.12. Verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.NOTE: Purchasing agent to establish adequate “Attic Stock” quantity desired. Quantity is to be ordered with original net order and shall be side-marked “Attic Stock”.
Item# CPT-103
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Carpet
Location: Coat Room
Issue Date: 2/6/2019 Revision Date:
Revision No.:
Item# CPT-104
Manufacturer Rep Firm
Milliken Flooring www.millikencarpet.comPh: 800.528.8453Contact: Megan Luciano Negab,[email protected]: 609.354.8153
Description
Notes:
Carpet Tile
Stain and Soil Protectant: StainSmart
Note: Install in Monolithic Pattern
1. Manufacturer required to submit strike-off sample to designer prior to production.2. Installer to verify appropriate seaming and pattern matching with manufacturer.3. Carpet must be solution dyed nylon with a minimum face weight of 32 oz for use in guest rooms and a minimum face weight of 36 oz for use in corridors.4. Refer to finish plan and finish schedule in construction documents for locations for carpet.5. Installer to verify yardage requirements prior to carpet order.6. Manufacturer to submit flame certificate to Agent.7. Carpet must meet all applicable local, state, and federal fire codes of final destination location.8. Carpet must be first quality goods from a single dyelot, shipped in the largest roll size possible. No seconds, no ends.9. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.10. Refer to Front End for terms, conditions, abbreviations, definitions, responsibilities, and general guidelines for all specified items.11. Submittal of shop drawings, finish samples, and/or prototype to R2A design team for review and written approval is required for any item supplied by a vendor other than the specified source.12. Verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.NOTE: Purchasing agent to establish adequate “Attic Stock” quantity desired. Quantity is to be ordered with original net order and shall be side-marked “Attic Stock”.
Style: FormworkItem
Color Render
Construction Tufted, Level Loop
Weight Tufted Face Weight: 18 oz/sq yd
Content
Width
Primary Backing
Yarn Type: Universal Fibers Solution-Dyed Nylon Type 6,6
Tile Size: 19.7" x 19.7"
Standard Backing: PVC-Free Underscore ES Cushion
Flooring Radiant Panel
Location
ASTM E 668 Class 1
Coat Room
Item: Carpet Tile
Model No.: FWK59
$0.00
Quantity:
Unit Cost:
Ext. Cost:
Units:
Issued By: scorso
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Item# CPT-104
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Lighting
Location: Ballroom
Issue Date: 2/6/2019 Revision Date:
Revision No.:
Item# DL-101
Manufacturer Rep Firm
Description
Notes:
Ballroom Chandelier
1. Designer to verify that all lamp shade colors/materials match when lit.2. Manufacturer to provide all required hardware to ensure proper installation.3. Metal grade and thickness must be commercial grade and withstand heavy hospitality usage.4. Metal finishes to have clear enamel matte coating, rust inhibit or primer, baked enamel or powdercoat finish for protection to prevent rust and corrosion. Manufacturer to ensure materials are non-corrosive and suitable for use in high humidity and salt air locations.5. Lamps (bulbs) not included. Property owner is responsible for the purchasing, coordination, and installation of all lamps (bulbs).6. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.7. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact R2A immediately for written clarification.8. Submittal of shop drawings, finish samples, and/or prototype to R2A for review and written approval is required for any item supplied by a vendor other than the specified source.9. Must meet ADA guidelines.
ALL QUANTITIES TO BE VERIFIED BY PURCHASING AGENT AND OR CLIENT REPRESENTATIVE. OWNER TO DETERMINE ADDITIONAL ATTIC STOCK. MANUFACTURER MUST PROVIDE 1 CORD SET WITH POLARIZED PLUG, FELT PADS AT BASE OF LAMP, APPROPRIATE PLUG, WIRING AND SOCKET. MANUFACTURER MUST SUBMIT FINISH SAMPLES TO R2A FOR DESIGNER'S APPROVAL PRIOR TO PURCHASING. MUST MEET U.L. APPROVAL AND BEAR APPROPRIATE U.L. APPROVAL LABEL.
MUST BE CONTRACT QUALITY AND SUITABLE FOR HEAVY COMMERCIAL USE.
ALL MATERIALS USED MUST MEET OR EXCEED ALL APPLICABLE FEDERAL, STATE, AND LOCAL FIRE CODE REQUIREMENTS.
T.B.D.Item
Quantity 6
Details
Location
UL Labels Required
Ballroom
Item: Chandelier 6
$0.00
$0.00
Quantity:
Unit Cost:
Ext. Cost:
EachUnits:
Issued By: scorso
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Lighting
Location: Pre-Function
Issue Date: 2/6/2019 Revision Date:
Revision No.:
Item# DL-102
Manufacturer Rep Firm
Description
Notes:
Pre-Function Ceiling Mounted Light
1. Designer to verify that all lamp shade colors/materials match when lit.2. Manufacturer to provide all required hardware to ensure proper installation.3. Metal grade and thickness must be commercial grade and withstand heavy hospitality usage.4. Metal finishes to have clear enamel matte coating, rust inhibit or primer, baked enamel or powdercoat finish for protection to prevent rust and corrosion. Manufacturer to ensure materials are non-corrosive and suitable for use in high humidity and salt air locations.5. Lamps (bulbs) not included. Property owner is responsible for the purchasing, coordination, and installation of all lamps (bulbs).6. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.7. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact R2A immediately for written clarification.8. Submittal of shop drawings, finish samples, and/or prototype to R2A for review and written approval is required for any item supplied by a vendor other than the specified source.9. Must meet ADA guidelines.
ALL QUANTITIES TO BE VERIFIED BY PURCHASING AGENT AND OR CLIENT REPRESENTATIVE. OWNER TO DETERMINE ADDITIONAL ATTIC STOCK. MANUFACTURER MUST PROVIDE 1 CORD SET WITH POLARIZED PLUG, FELT PADS AT BASE OF LAMP, APPROPRIATE PLUG, WIRING AND SOCKET. MANUFACTURER MUST SUBMIT FINISH SAMPLES TO R2A FOR DESIGNER'S APPROVAL PRIOR TO PURCHASING. MUST MEET U.L. APPROVAL AND BEAR APPROPRIATE U.L. APPROVAL LABEL.
MUST BE CONTRACT QUALITY AND SUITABLE FOR HEAVY COMMERCIAL USE.
ALL MATERIALS USED MUST MEET OR EXCEED ALL APPLICABLE FEDERAL, STATE, AND LOCAL FIRE CODE REQUIREMENTS.
T.B.D.Item
Quantity 3
Details
Location
UL Labels Required
Pre-Function
Item: Ceiling Fixture 3
$0.00
$0.00
Quantity:
Unit Cost:
Ext. Cost:
EachUnits:
Issued By: scorso
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Lighting
Location: Pre-Function
Issue Date: 2/6/2019 Revision Date:
Revision No.:
Item# DL-103
Manufacturer Rep Firm
Description
Notes:
Pre-Function Ceiling Mounted Light
1. Designer to verify that all lamp shade colors/materials match when lit.2. Manufacturer to provide all required hardware to ensure proper installation.3. Metal grade and thickness must be commercial grade and withstand heavy hospitality usage.4. Metal finishes to have clear enamel matte coating, rust inhibit or primer, baked enamel or powdercoat finish for protection to prevent rust and corrosion. Manufacturer to ensure materials are non-corrosive and suitable for use in high humidity and salt air locations.5. Lamps (bulbs) not included. Property owner is responsible for the purchasing, coordination, and installation of all lamps (bulbs).6. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.7. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact R2A immediately for written clarification.8. Submittal of shop drawings, finish samples, and/or prototype to R2A for review and written approval is required for any item supplied by a vendor other than the specified source.9. Must meet ADA guidelines.
ALL QUANTITIES TO BE VERIFIED BY PURCHASING AGENT AND OR CLIENT REPRESENTATIVE. OWNER TO DETERMINE ADDITIONAL ATTIC STOCK. MANUFACTURER MUST PROVIDE 1 CORD SET WITH POLARIZED PLUG, FELT PADS AT BASE OF LAMP, APPROPRIATE PLUG, WIRING AND SOCKET. MANUFACTURER MUST SUBMIT FINISH SAMPLES TO R2A FOR DESIGNER'S APPROVAL PRIOR TO PURCHASING. MUST MEET U.L. APPROVAL AND BEAR APPROPRIATE U.L. APPROVAL LABEL.
MUST BE CONTRACT QUALITY AND SUITABLE FOR HEAVY COMMERCIAL USE.
ALL MATERIALS USED MUST MEET OR EXCEED ALL APPLICABLE FEDERAL, STATE, AND LOCAL FIRE CODE REQUIREMENTS.
T.B.D.Item
Quantity 4
Details
Location
UL Labels Required
Pre-Function
Item: Ceiling Fixture 4
$0.00
$0.00
Quantity:
Unit Cost:
Ext. Cost:
EachUnits:
Issued By: scorso
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Lighting
Location: Ballroom
Issue Date: 2/6/2019 Revision Date:
Revision No.:
Item# DL-104
Manufacturer Rep Firm
Description
Notes:
Wall Sconce
1. Designer to verify that all lamp shade colors/materials match when lit.2. Manufacturer to provide all required hardware to ensure proper installation.3. Metal grade and thickness must be commercial grade and withstand heavy hospitality usage.4. Metal finishes to have clear enamel matte coating, rust inhibit or primer, baked enamel or powdercoat finish for protection to prevent rust and corrosion. Manufacturer to ensure materials are non-corrosive and suitable for use in high humidity and salt air locations.5. Lamps (bulbs) not included. Property owner is responsible for the purchasing, coordination, and installation of all lamps (bulbs).6. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.7. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact R2A immediately for written clarification.8. Submittal of shop drawings, finish samples, and/or prototype to R2A for review and written approval is required for any item supplied by a vendor other than the specified source.9. Must meet ADA guidelines.
ALL QUANTITIES TO BE VERIFIED BY PURCHASING AGENT AND OR CLIENT REPRESENTATIVE. OWNER TO DETERMINE ADDITIONAL ATTIC STOCK. MANUFACTURER MUST PROVIDE 1 CORD SET WITH POLARIZED PLUG, FELT PADS AT BASE OF LAMP, APPROPRIATE PLUG, WIRING AND SOCKET. MANUFACTURER MUST SUBMIT FINISH SAMPLES TO R2A FOR DESIGNER'S APPROVAL PRIOR TO PURCHASING. MUST MEET U.L. APPROVAL AND BEAR APPROPRIATE U.L. APPROVAL LABEL.
MUST BE CONTRACT QUALITY AND SUITABLE FOR HEAVY COMMERCIAL USE.
ALL MATERIALS USED MUST MEET OR EXCEED ALL APPLICABLE FEDERAL, STATE, AND LOCAL FIRE CODE REQUIREMENTS.
T.B.D.Item
Quantity 18
Details
Location
UL Labels Required
Ballroom
Item: Wall Sconce 18
$0.00
$0.00
Quantity:
Unit Cost:
Ext. Cost:
EachUnits:
Issued By: scorso
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Lighting
Location: Pre-Function
Issue Date: 2/6/2019 Revision Date:
Revision No.:
Item# DL-105
Manufacturer Rep Firm
Description
Notes:
Wall Sconce
1. Designer to verify that all lamp shade colors/materials match when lit.2. Manufacturer to provide all required hardware to ensure proper installation.3. Metal grade and thickness must be commercial grade and withstand heavy hospitality usage.4. Metal finishes to have clear enamel matte coating, rust inhibit or primer, baked enamel or powdercoat finish for protection to prevent rust and corrosion. Manufacturer to ensure materials are non-corrosive and suitable for use in high humidity and salt air locations.5. Lamps (bulbs) not included. Property owner is responsible for the purchasing, coordination, and installation of all lamps (bulbs).6. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.7. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact R2A immediately for written clarification.8. Submittal of shop drawings, finish samples, and/or prototype to R2A for review and written approval is required for any item supplied by a vendor other than the specified source.9. Must meet ADA guidelines.
ALL QUANTITIES TO BE VERIFIED BY PURCHASING AGENT AND OR CLIENT REPRESENTATIVE. OWNER TO DETERMINE ADDITIONAL ATTIC STOCK. MANUFACTURER MUST PROVIDE 1 CORD SET WITH POLARIZED PLUG, FELT PADS AT BASE OF LAMP, APPROPRIATE PLUG, WIRING AND SOCKET. MANUFACTURER MUST SUBMIT FINISH SAMPLES TO R2A FOR DESIGNER'S APPROVAL PRIOR TO PURCHASING. MUST MEET U.L. APPROVAL AND BEAR APPROPRIATE U.L. APPROVAL LABEL.
MUST BE CONTRACT QUALITY AND SUITABLE FOR HEAVY COMMERCIAL USE.
ALL MATERIALS USED MUST MEET OR EXCEED ALL APPLICABLE FEDERAL, STATE, AND LOCAL FIRE CODE REQUIREMENTS.
T.B.D.Item
Quantity 9
Details
Location
UL Labels Required
Pre-Function
Item: Wall Sconce 9
$0.00
$0.00
Quantity:
Unit Cost:
Ext. Cost:
EachUnits:
Issued By: scorso
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Drapery/Window Treatment
Location: Ballroom
Issue Date: 2/6/2019 Revision Date:
Revision No.:
Item# DR-101
Manufacturer Rep Firm
Bramson House or EQ. www.bramsonhouse.com151 Albany Avenue Freeport, NY 11520Ph: 516-764-5006 Fax: 516-764-4539Contact: Barry Silverman [email protected]: 800-764-5006
Description
Notes:
Full Height Drapery with Black-Out Liner
3 Finger French Pleat with 4" Double turn hem, all inter lined materials to be straight-stitched at bottom, provide 1" covered corner weights. Overlocked seams and blind stitched hems required.
Fabric: MFR: Fabricut Pattern: Signature-L Color: T.B.D. Content: 100% Polyester Width: 57" Repeat: N/A Flamability: Passes NFPA 701
FABRICATOR IS REQUIRED TO FIELD VERIFY ALL DIMENSIONS, YARDAGE REQUIREMENTS AND NY EXISTING CONDITIONS PRIOR TO FABRICATION. INSTALL PER R2A SPECIFICATIONS AND DRAWINGS. FABRICATOR IS TO PROVIDE ALL HEAVY DUTY HARDWARE AND HEAVY DUTY HOOKS.
OVERLOCKED SEAMS AND BLIND STITCHED HEMS REQUIRED.
IF APPLICABLE, FABRICATOR IS REQUIRED TO FIELD VERIFY CARPET THICKNESS PRIOR TO FABRICATION.
MUST BE CONTRACT QUALITY AND SUITABLE FOR HEAVY COMMERCIAL USE. ALL MATERIALS USED MUST MEET OR EXCEED ALL APPLICABLE FEDERAL, STATE, AND LOCAL FIRE CODE REQUIREMENTS.
Overall Width Contractor to Field Measure
Finished Length
Contractor to Field Measure
Black Out Provide Black-Out Liner
Fullness
Fabric
Mounting Hardware / Track
200%
See Description
Existing Powered Track to be ReusedContractor to verify condition and repair as required
Location Ballroom With Sheer DR-103
Item: Drapery with DR-103
$0.00
Quantity:
Unit Cost:
Ext. Cost:
Units:
Issued By: scorso
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Drapery/Window Treatment
Location: Pre-Function
Issue Date: 2/6/2019 Revision Date:
Revision No.:
Item# DR-102
Manufacturer Rep Firm
Bramson House or EQ. www.bramsonhouse.com151 Albany Avenue Freeport, NY 11520Ph: 516-764-5006 Fax: 516-764-4539Contact: Barry Silverman [email protected]: 800-764-5006
Description
Notes:
Partial Height Drapery with Black-Out Liner
3 Finger French Pleat with 4" Double turn hem, all inter lined materials to be straight-stitched at bottom, provide 1" covered corner weights. Overlocked seams and blind stitched hems required.Baton rod draw to be installed behind curtains.
Fabric: MFR: Fabricut Pattern: Signature-L Color: T.B.D. Content: 100% Polyester Width: 57" Repeat: N/A Flamability: Passes NFPA 701
FABRICATOR IS REQUIRED TO FIELD VERIFY ALL DIMENSIONS, YARDAGE REQUIREMENTS AND NY EXISTING CONDITIONS PRIOR TO FABRICATION. INSTALL PER R2A SPECIFICATIONS AND DRAWINGS. FABRICATOR IS TO PROVIDE ALL HEAVY DUTY HARDWARE AND HEAVY DUTY HOOKS.
OVERLOCKED SEAMS AND BLIND STITCHED HEMS REQUIRED.
IF APPLICABLE, FABRICATOR IS REQUIRED TO FIELD VERIFY CARPET THICKNESS PRIOR TO FABRICATION.
MUST BE CONTRACT QUALITY AND SUITABLE FOR HEAVY COMMERCIAL USE. ALL MATERIALS USED MUST MEET OR EXCEED ALL APPLICABLE FEDERAL, STATE, AND LOCAL FIRE CODE REQUIREMENTS.
Overall Width Contractor to Field Measure
Finished Length
Contractor to Field Measure
Black Out Provide Black-Out Liner
Fullness
Fabric
Mounting Hardware / Track
200%
See Description
Provide New ceiling Mounted Track
Location Pre-Function With Sheer DR-104
Item: Drapery with DR-104
$0.00
Quantity:
Unit Cost:
Ext. Cost:
Units:
Issued By: scorso
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Drapery/Window Treatment
Location: Ballroom
Issue Date: 2/6/2019 Revision Date:
Revision No.:
Item# DR-103
Manufacturer Rep Firm
Bramson House or EQ. www.bramsonhouse.com151 Albany Avenue Freeport, NY 11520Ph: 516-764-5006 Fax: 516-764-4539Contact: Barry Silverman [email protected]: 800-764-5006
Description
Notes:
Full Height Sheer Drapery
3 Finger French Pleat with 4" Double turn hem, all inter lined materials to be straight-stitched at bottom, provide 1" covered corner weights. Overlocked seams and blind stitched hems required.
Fabric: MFR: Fabricut Pattern: Carol Color: Sawdust Content: 100% Polyester Width: 118" Repeat: N/A Flamability: Passes NFPA 701
FABRICATOR IS REQUIRED TO FIELD VERIFY ALL DIMENSIONS, YARDAGE REQUIREMENTS AND NY EXISTING CONDITIONS PRIOR TO FABRICATION. INSTALL PER R2A SPECIFICATIONS AND DRAWINGS. FABRICATOR IS TO PROVIDE ALL HEAVY DUTY HARDWARE AND HEAVY DUTY HOOKS.
OVERLOCKED SEAMS AND BLIND STITCHED HEMS REQUIRED.
IF APPLICABLE, FABRICATOR IS REQUIRED TO FIELD VERIFY CARPET THICKNESS PRIOR TO FABRICATION.
MUST BE CONTRACT QUALITY AND SUITABLE FOR HEAVY COMMERCIAL USE. ALL MATERIALS USED MUST MEET OR EXCEED ALL APPLICABLE FEDERAL, STATE, AND LOCAL FIRE CODE REQUIREMENTS.
Overall Width Contractor to Field Measure
Finished Length
Contractor to Field Measure
Fullness
Fabric
Mounting Hardware / Track
200%
See Description
Existing Powered Track to be ReusedContractor to verify condition and repair as required
Location Ballroom With Drapery DR-101
Item: Drapery with DR-101
$0.00
Quantity:
Unit Cost:
Ext. Cost:
Units:
Issued By: scorso
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Drapery/Window Treatment
Location: Pre-Function
Issue Date: 2/6/2019 Revision Date:
Revision No.:
Item# DR-104
Manufacturer Rep Firm
Bramson House or EQ. www.bramsonhouse.com151 Albany Avenue Freeport, NY 11520Ph: 516-764-5006 Fax: 516-764-4539Contact: Barry Silverman [email protected]: 800-764-5006
Description
Notes:
Partial Height Sheer Drapery
3 Finger French Pleat with 4" Double turn hem, all inter lined materials to be straight-stitched at bottom, provide 1" covered corner weights. Overlocked seams and blind stitched hems required.Baton rod draw to be installed behind curtains.
Fabric: MFR: Fabricut Pattern: Carol Color: Sawdust Content: 100% Polyester Width: 118" Repeat: N/A Flamability: Passes NFPA 701
FABRICATOR IS REQUIRED TO FIELD VERIFY ALL DIMENSIONS, YARDAGE REQUIREMENTS AND NY EXISTING CONDITIONS PRIOR TO FABRICATION. INSTALL PER R2A SPECIFICATIONS AND DRAWINGS. FABRICATOR IS TO PROVIDE ALL HEAVY DUTY HARDWARE AND HEAVY DUTY HOOKS.
OVERLOCKED SEAMS AND BLIND STITCHED HEMS REQUIRED.
IF APPLICABLE, FABRICATOR IS REQUIRED TO FIELD VERIFY CARPET THICKNESS PRIOR TO FABRICATION.
MUST BE CONTRACT QUALITY AND SUITABLE FOR HEAVY COMMERCIAL USE. ALL MATERIALS USED MUST MEET OR EXCEED ALL APPLICABLE FEDERAL, STATE, AND LOCAL FIRE CODE REQUIREMENTS.
Overall Width Contractor to Field Measure
Finished Length
Contractor to Field Measure
Fullness
Fabric
Mounting Hardware / Track
200%
See Description
Provide New ceiling Mounted Track
Location Pre-Function With Drapery DR-102
Item: Drapery with DR-102
$0.00
Quantity:
Unit Cost:
Ext. Cost:
Units:
Issued By: scorso
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Fabric
Location: Ballroom
Issue Date: 2/6/2019 Revision Date:
Revision No.:
Item# FAB-101
Manufacturer Rep Firm
Fabricut Contract www.fabricutcontract.com9303 East 46th St. Tulsa , OK 74145USAPh: 800-999-5533Contact: Susan Poletti [email protected]
Description
Notes:
Fabric for Wrapped Panels - Refer to Plans, Elevation, and Extent
ALL QUANTITIES TO BE VERIFIED BY PURCHASING AGENT. OWNER TO DETERMINE ADDITIONAL ATTIC STOCK.
ALL YARDAGE REQUIREMENTS MUST BE VERIFIED BY FABRICATOR. MANUFACTURER IS REQUIRED TO SUBMIT A CUTTING OF CURRENT DYE LOT TO R2A FOR DESIGNER'S APPROVAL PRIOR TO PURCHASING.
FINISH AS NECESSARY TO MEET OR EXCEED ALL STANDARDS FOR COMMERCIAL USE. MUST BE CONTRACT QUALITY AND SUITABLE FOR HEAVY COMMERCIAL USE. ALL MATERIALS USED MUST MEET OR EXCEED ALL APPLICABLE FEDERAL, STATE AND LOCAL FIRE CODE REQUIREMENTS. MATERIALS MAY NEED ADDITIONAL FLAME TREATMENT TO PASS MORE RIGID REQUIREMENTS FOR STATE AND LOCAL FIRE CODES.
Holzer FR-OnePattern
Color Cream
Content 100% FR - Polyester
Width
Flame Resistance
Application
57"
Passes NFPA 701
Ballroom Wrapped Wall Panels
Item: Fabric at Wrapped Panels
$0.00
Quantity:
Unit Cost:
Ext. Cost:
Units:
Issued By: scorso
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Fabric
Location: SG-101, SG-102, SG-103
Issue Date: 2/6/2019 Revision Date:
Revision No.:
Item# FAB-102
Manufacturer Rep Firm
Maharam www.maharam.com251 Park Ave. South New York, NY 10010USAContact: Jill Kupcha [email protected]: 800.645.3943 x 2906
Description
Notes:
Upholstery Fabric
ALL QUANTITIES TO BE VERIFIED BY PURCHASING AGENT. OWNER TO DETERMINE ADDITIONAL ATTIC STOCK.
ALL YARDAGE REQUIREMENTS MUST BE VERIFIED BY FABRICATOR. MANUFACTURER IS REQUIRED TO SUBMIT A CUTTING OF CURRENT DYE LOT TO R2A FOR DESIGNER'S APPROVAL PRIOR TO PURCHASING.
FINISH AS NECESSARY TO MEET OR EXCEED ALL STANDARDS FOR COMMERCIAL USE. MUST BE CONTRACT QUALITY AND SUITABLE FOR HEAVY COMMERCIAL USE. ALL MATERIALS USED MUST MEET OR EXCEED ALL APPLICABLE FEDERAL, STATE AND LOCAL FIRE CODE REQUIREMENTS. MATERIALS MAY NEED ADDITIONAL FLAME TREATMENT TO PASS MORE RIGID REQUIREMENTS FOR STATE AND LOCAL FIRE CODES.
Alloy 4666064Pattern
Color 008 Peat
Content 100% Polyurethane, Polyester Backing
Durability 95,000+
Width
Flame Resistance
Application
54"
Passes NFPA 701
Seating SG-101, SG-102, and SG-103
Item: Upholstery Fabric
$0.00
Quantity:
Unit Cost:
Ext. Cost:
Units:
Issued By: scorso
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Item# FAB-102
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Paint
Location: As Noted
Issue Date: 2/6/2019 Revision Date:
Revision No.:
Item# PT-101
Manufacturer Rep Firm
Sherwin Williams226 Talmadge Road P.O. Box 847 Edison, NJ 08818Contact: David HallPh: (908) 309-8709
Description
Notes:
Materials:Primer, undercoat, block filler, finish coat(s) are to be compatible and the same manufacturer. All primers and undercoats are to be tinted to 50% lighter than the selected and approved finish coat color. All finish coats are to be tinted 25% darker than the primer coat until approved finish coat color is achieved. When the color schedule calls for the use of DEEP TONES (interior and/or exterior), it is the responsibility of the painting contractor to utilize the appropriate Deep Base Primers as manufactured by Benjamin Moore & Co. for use on the substrate for which they are intended.
1. ALL IMAGES, PHOTOGRAPHS, RENDERINGS OF SPECIFIED ITEMS CONTAINED IN THIS SPECIFICATION PACKAGE ARE FOR GENERAL DESIGN INTENT AND REFERENCE ONLY.2. REFER TO DRAWINGS FOR EXACT LOCATIONS AND/OR MOUNTING HEIGHTS OF FURNITURE, FIXTURES, AND EQUIPMENT. IN THE EVENT OF A DISCREPANCY BETWEEN DRAWINGS AND SPECIFICATIONS, PLEASE CONTACT R2A IMMEDIATELY FOR WRITTEN CLARIFICATION.3. SUBMITTAL OF SHOP DRAWINGS, FINISH SAMPLES, AND/OR PROTOTYPE TO R2A DESIGN TEAM FOR REVIEW AND WRITTEN APPROVAL IS REQUIRED FOR ANY ITEM SUPPLIED BY A VENDOR OTHER THAN THE SPECIFIED SOURCE.
Color Westhighland White
Sheen Semi-Gloss at Doors and FramesEggshell at WallsFlat at Ceilings
Location As Noted
Item: Paint
Model No.: SW7566
$0.00
Quantity:
Unit Cost:
Ext. Cost:
Units:
Issued By: scorso
Item# PT-101
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Paint
Location: As Noted
Issue Date: 2/6/2019 Revision Date:
Revision No.:
Item# PT-102
Manufacturer Rep Firm
Sherwin Williams226 Talmadge Road P.O. Box 847 Edison, NJ 08818Contact: David HallPh: (908) 309-8709
Description
Notes:
Materials:Primer, undercoat, block filler, finish coat(s) are to be compatible and the same manufacturer. All primers and undercoats are to be tinted to 50% lighter than the selected and approved finish coat color. All finish coats are to be tinted 25% darker than the primer coat until approved finish coat color is achieved. When the color schedule calls for the use of DEEP TONES (interior and/or exterior), it is the responsibility of the painting contractor to utilize the appropriate Deep Base Primers as manufactured by Benjamin Moore & Co. for use on the substrate for which they are intended.
1. ALL IMAGES, PHOTOGRAPHS, RENDERINGS OF SPECIFIED ITEMS CONTAINED IN THIS SPECIFICATION PACKAGE ARE FOR GENERAL DESIGN INTENT AND REFERENCE ONLY.2. REFER TO DRAWINGS FOR EXACT LOCATIONS AND/OR MOUNTING HEIGHTS OF FURNITURE, FIXTURES, AND EQUIPMENT. IN THE EVENT OF A DISCREPANCY BETWEEN DRAWINGS AND SPECIFICATIONS, PLEASE CONTACT R2A IMMEDIATELY FOR WRITTEN CLARIFICATION.3. SUBMITTAL OF SHOP DRAWINGS, FINISH SAMPLES, AND/OR PROTOTYPE TO R2A DESIGN TEAM FOR REVIEW AND WRITTEN APPROVAL IS REQUIRED FOR ANY ITEM SUPPLIED BY A VENDOR OTHER THAN THE SPECIFIED SOURCE.
Color Whole Wheat
Sheen Semi-Gloss at Doors and FramesEggshell at WallsFlat at Ceilings
Location As Noted
Item: Paint
Model No.: SW6121
$0.00
Quantity:
Unit Cost:
Ext. Cost:
Units:
Issued By: scorso
Item# PT-102
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Seating
Location: Ballroom
Issue Date: 2/6/2019 Revision Date:
Revision No.:
Item# SG-101
Manufacturer Rep Firm
Description
Notes:
Banquet Chair
ALL QUANTITIES TO BE VERIFIED BY PURCHASING AGENT AND OR CLIENT REPRESENTATIVE. OWNER TO DETERMINE ADDITIONAL ATTIC STOCK IF APPLICABLE. MFGR IS REQUIRED TO VERIFY AND PROVIDE ALL C.O.M REQUIREMENTS PRIOR TO PURCHASING. MFGR IS REQUIRED TO SUBMIT A FULL SET OF SHOP DRAWINGS AND ALL FINISH SAMPLES TO R2A FOR REVIEW AND APPROVAL PRIOR TO PURCHASING AND PRODUCTION.
ALL MATERIALS USED MUST MEET OR EXCEED ALL APPLICABLE FEDERAL, STATE, AND LOCAL FIRE CODE REQUIREMENTS.
TBDStyle
Construction Only kiln-dried hardwood is used. All Stress joints are corner-blocked, glued, double doweled, stapled or screwed if necessary.
Fabric
Nylon or Metal Glides
FAB-102Yardage: TBD per chair
Nylon for Carpet
BallroomLocation
Item: Banquet Chair 500
$0.00
$0.00
Quantity:
Unit Cost:
Ext. Cost:
EachUnits:
Issued By: scorso
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Seating
Location: Ballroom
Issue Date: 2/6/2019 Revision Date:
Revision No.:
Item# SG-102
Manufacturer Rep Firm
ISA International www.havaseat.com46 Dufflaw Road 46 Dufflaw RoadCanada M6A 2W1Ph: 1-800-881-3928Contact: Nick Schulde [email protected]: 800-881-3928 x225 Fax: 416-782-7993
Description
Notes:
Arm Chair - Stage
ALL QUANTITIES TO BE VERIFIED BY PURCHASING AGENT AND OR CLIENT REPRESENTATIVE. OWNER TO DETERMINE ADDITIONAL ATTIC STOCK IF APPLICABLE. MFGR IS REQUIRED TO VERIFY AND PROVIDE ALL C.O.M REQUIREMENTS PRIOR TO PURCHASING. MFGR IS REQUIRED TO SUBMIT A FULL SET OF SHOP DRAWINGS AND ALL FINISH SAMPLES TO R2A FOR REVIEW AND APPROVAL PRIOR TO PURCHASING AND PRODUCTION.
ALL MATERIALS USED MUST MEET OR EXCEED ALL APPLICABLE FEDERAL, STATE, AND LOCAL FIRE CODE REQUIREMENTS.
584 Topaz ArmStyle
Dimensions 34"H x 21"D x 23"W
Construction Only kiln-dried hardwood is used. All Stress joints are corner-blocked, glued, double doweled, stapled or screwed if necessary.
Finish
Fabric
Nylon or Metal Glides
Submit for Selection
FAB-102Yardage: 2.5 per chair
Nylon for Carpet
BallroomLocation
Item: Stage Chair 10
$0.00
$0.00
Quantity:
Unit Cost:
Ext. Cost:
EachUnits:
Issued By: scorso
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Item# SG-102
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Seating
Location: Ballroom
Issue Date: 2/6/2019 Revision Date:
Revision No.:
Item# SG-103
Manufacturer Rep Firm
Goodleman Sales1555 Miriam Drive North Brunswick, NJ 08902USAPh: 732-940-0519Contact: Ira Goodleman [email protected]: 609-306-5249
Charter Furniture www.charterfurniture.com206 East Frazier Avenue Liberty, NC 27298Ph: 336.622.2201Contact: Ira Goodelman
Description
Notes:
Arm Chair - Stage
ALL QUANTITIES TO BE VERIFIED BY PURCHASING AGENT AND OR CLIENT REPRESENTATIVE. OWNER TO DETERMINE ADDITIONAL ATTIC STOCK IF APPLICABLE. MFGR IS REQUIRED TO VERIFY AND PROVIDE ALL C.O.M REQUIREMENTS PRIOR TO PURCHASING. MFGR IS REQUIRED TO SUBMIT A FULL SET OF SHOP DRAWINGS AND ALL FINISH SAMPLES TO R2A FOR REVIEW AND APPROVAL PRIOR TO PURCHASING AND PRODUCTION.
ALL MATERIALS USED MUST MEET OR EXCEED ALL APPLICABLE FEDERAL, STATE, AND LOCAL FIRE CODE REQUIREMENTS.
500-2060Style
Dimensions 24.5"W x 27"D x 40.5"H
Construction Only kiln-dried hardwood is used. All Stress joints are corner-blocked, glued, double doweled, stapled or screwed if necessary.
Finish
Fabric
Nylon or Metal Glides
Submit for Selection
FAB-102Yardage: 3.5 per chair
Nylon for Carpet
BallroomLocation
Item: Stage Chair 6
$0.00
$0.00
Quantity:
Unit Cost:
Ext. Cost:
EachUnits:
Issued By: scorso
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Item# SG-103
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Wallcovering
Location: Pre-Function
Issue Date: 2/6/2019 Revision Date:
Revision No.:
Item# WC-101
Manufacturer Rep Firm
Description
Notes:
Vinyl Wallcovering T.B.D.Contractor to provide allowance of $20 Linear Yard
ALL QUANTITIES TO BE VERIFIED BY PURCHASING AGENT. OWNER TO DETERMINE ADDITIONAL ATTIC STOCK. INSTALL PER R2A DRAWINGS. INSTALLER IS REQUIRED TO FIELD VERIFY TOTAL QUANTITY REQUIRED PRIOR TO PURCHASING. MANUFACTURER IS REQUIRED TO SUBMIT SAMPLE TO R2A FOR APPROVAL PRIOR TO PURCHASING.
MUST BE CONTRACT QUALITY AND SUITABLE FOR HEAVY COMMERCIAL USE. ALL MATERIALS USED MUST MEET OR EXCEED ALL APPLICABLE FEDERAL, STATE AND LOCAL FIRE CODE REQUIREMENTS.
Weight
Flame Rating
Quantity
20 oz.ly , Type II
Class A (ASTM E-84)
To be determined by installer
Pre-Function Above WainscotLocation
Item: Wallcovering
$0.00
Quantity:
Unit Cost:
Ext. Cost:
Units:
Issued By: scorso
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Wallcovering
Location: Bathrooms
Issue Date: 2/6/2019 Revision Date:
Revision No.:
Item# WC-102
Manufacturer Rep Firm
Wolf GordonPh: 800-347-0550Contact: Carol Mortimer [email protected] Ph: 302-598-8380 Fax: 718-361-1090
Description
Notes:
Vinyl Wallcovering
ALL QUANTITIES TO BE VERIFIED BY PURCHASING AGENT. OWNER TO DETERMINE ADDITIONAL ATTIC STOCK. INSTALL PER R2A DRAWINGS. INSTALLER IS REQUIRED TO FIELD VERIFY TOTAL QUANTITY REQUIRED PRIOR TO PURCHASING. MANUFACTURER IS REQUIRED TO SUBMIT SAMPLE TO R2A FOR APPROVAL PRIOR TO PURCHASING.
MUST BE CONTRACT QUALITY AND SUITABLE FOR HEAVY COMMERCIAL USE. ALL MATERIALS USED MUST MEET OR EXCEED ALL APPLICABLE FEDERAL, STATE AND LOCAL FIRE CODE REQUIREMENTS.
Collection: London ChicPattern: Vauxhall
Item
Color Solstice
Width 54"
Backing Non-Woven
Installation Straight hung. Random match
Repeat
Weight
Flame Rating
Quantity
52" H x 25.25"V
20.3 oz.ly , Type II
Class A (ASTM E-84)
To be determined by installer
Pre-Function Above WainscotLocation
Item: Wallcovering
Model No.: GOH 12831020
$0.00
Quantity:
Unit Cost:
Ext. Cost:
Units:
Issued By: scorso
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment
Item# WC-102
Project:
Project No: 18625.01
Chamberlain Student Center - Ballroom Refurbishment