1
Polished transverse cross- section of a Bi-2212 round wire with 7 bundles of 27 filaments manufactur ed by OST. This wire was heat treated at 100 atm over- pressure to densify the filaments. FESEM-BSE Image by Jianyi Jiang, ASC, NHMFL Transverse cross- section of a Bi-2212 round wire with 7 bundles of 27 filaments manufacture d by OST. This wire was heat treated at 100 atm over- pressure to densify the filaments. The silver matrix was etched down to reveal the sub- surface filament structure. FESEM-SE2 Images (etched wires) by Maxime R. Matras, ASC, NHMFL

FESEM-BSE Image by Jianyi Jiang, ASC, NHMFL

  • Upload
    chogan

  • View
    71

  • Download
    4

Embed Size (px)

DESCRIPTION

Polished transverse cross- section of a Bi-2212 round wire with 7 bundles of 27 filaments manufactured by OST . This wire was heat treated at 100  atm over-pressure to densify the filaments. - PowerPoint PPT Presentation

Citation preview

Page 1: FESEM-BSE  Image by Jianyi Jiang, ASC, NHMFL

Polished transverse cross- section of a Bi-2212 round wire with 7 bundles of 27 filaments manufactured by OST. This wire was heat treated at 100 atm over-pressure to densify the filaments.

FESEM-BSE Image by Jianyi Jiang, ASC, NHMFL

Transverse cross- section of a Bi-2212 round wire with 7 bundles of 27 filaments manufactured by OST. This wire was heat treated at 100 atm over-pressure to densify the filaments. The silver matrix was etched down to reveal the sub-surface filament structure.

FESEM-SE2 Images (etched wires) by Maxime R. Matras, ASC, NHMFL