ferramentas catálogo EDMO

TOOLs

14

581Order Toll Free1-800-235-3300

Fax: 1-800-828-0623

http://www.edmo.com

To

ol

s

Add-A-Nut Riv Nut/Nut Sert Tools ......................................................... 598

Chemtronics Soldering Supplies .............................................................. 604

Cooper Tools Wire & Cable Strippers ........................................................ 588 Metal Snips ......................................................................... 588 Wire Cutters ........................................................................ 589 Hex/Spline Keys .................................................................. 591 Screwdrivers ....................................................................... 591 Tool Sets ............................................................................. 596 Forceps ............................................................................... 600

Desco Industries Wire Threaders/Wire Spoons .............................................. 595

DMC Crimp Tools - Manual ................................................... 582-585 Crimp Tools - Pneumatic .............................................. 584-585 Crimp Accessories .............................................................. 586 Insertion & Extraction Tools .................................. 586-587, 597 Safety Wire Tools ................................................................ 589 Tweezers ............................................................................. 597

Forbes Aviation Products Spark Plug Tools ................................................................. 601

GC Electronics Tweezers ............................................................................. 596 Vises/Clamps ...................................................................... 600 Heat Guns ........................................................................... 602

General Electrodynamics Corporation Scales - Aircraft ............................................................ 605-606

Greenlee Drill Bits ............................................................................... 598

Hardigg Cases ................................................................... 606-608, 613 Field Desks ......................................................................... 614

Foot Lockers .................................. 614 Hellerman Tyton Cable Tie Guns ................................................................... 583

Ideal Crimp Tools - Manual .......................................................... 582 Wire & Cable Strippers ................................................. 588-590 Wire Cutters ........................................................................ 589

Iso-Tip Soldering Supplies .............................................................. 602

Kester Soldering Supplies .............................................................. 604

Leatherman Multipurpose Tools ....................................................... 591-595

Malin Co. Breakaway Wire .................................................................. 601

Milbar Safety Wire Tools ................................................................ 601

Miscellaneous Insertion & Extraction Tools ................................................. 591 Screw Grab ......................................................................... 596 Hole Punches ...................................................................... 598 Snap Ring Tools .................................................................. 601

National-Standard Safety Wire .......................................................................... 601

PanaVise Vises/Clamps ............................................................... 598-600

Pelican Work Lights ......................................................................... 605 Cases ........................................................................... 608-612

Raychem Insertion & Extraction Tools .......................................... 587-588

Sednal Consulting Twisted Pair Wire Stripper ................................................... 588 Twisted Stripper Die Sets .................................................... 588 Wire Strippers ..................................................................... 588

Solder-It Heat Guns ........................................................................... 602 Soldering Supplies .............................................................. 602

Spring Tools Screwdrivers - Impact Style ................................................ 597 Punches/Chisels ................................................................. 597 ID Stampers ................................................................. 597-598

Steinel Heat Guns .................................................................... 601-602

Stewart R Browne Work Lights .................................................................. 604-605 GFCI - Portable ................................................................... 605 Static Grounding Reels ....................................................... 605

Triplett Wire & Cable Tracing Kits ................................................... 589

Tyco Electronics Crimp Tools - Manual .......................................................... 582 Crimp Accessories .............................................................. 586 Insertion & Extraction Tools ................................................. 587 Wire & Cable Strippers ................................................. 587-588

Weller Heat Guns ........................................................................... 602 Soldering Supplies ....................................................... 603-604

Xcelite Screwdrivers ....................................................................... 595 Nutdrivers ............................................................................ 596 Reamers .............................................................................. 596 Tweezers ............................................................................. 596 Knives - Precision ............................................................... 600 Static Mats .......................................................................... 600

TOOLs

14

Order Toll Free1-800-235-3300Fax: 1-800-828-0623

http://www.edmo.com582

Crimp Tools

Suggested Crimp Tool for RAYCHEM Heat Shrinkable Crimp Butt Splices: DANIELSP/N: GMT232

HX4Open Frame Crimp Tool(Die Set Sold Separately)P/N: HX4

Die Set 5-24 AWGP/N: Y501

P/N: Description:30-500 22-10 AWG Terminal Crimp Tool. IDEAL30-572 Die Set 26-16 AWG, For Tool 30-500

PRO Crimper IIAMP Tool & Die Set, 10-22 AWG.P/N: 58433-3

CERTI-LOK Crimping Tool(Does not include die set). Die set P/N 169404 crimps insulated terminals & splices, 22-10 AWG.P/N: 169400

P/N: Description:18E Crimper/Cutter/6 Strip Station

BANTAM ROTA-CRIMP tool (8 - 1/0)P/N: 601075-1

ROTA-CRIMP tool (8-4/0).P/N: 600850

OPEN BARREL CRIMP TOOL FORGROUNDING BLOCKS & LOCKING CONNEC-TORSP/N: Description:28-512 Open Barrel Crimp Tool, 30-18 AWG

CLOSED BARREL CRIMP TOOLP/N Description35-465 20-26 AWGClosed Barrel Crimp Tool

“Little Blue” Crimp Tool(Die Set Sold Separately)P/N: AFM8

BNC Crimp Tools

220015-1 TYCO Crimper

AF8 “Big Blue” Crimp Tool(Die Set Sold Separately)

30-506 Crimp Tool Frame30-587 Crimp Die Set HEX for 30-484

354940-1, 58433-1 Crimper

The Strato-Therm Hand Crimping ToolUsed to crimp high-temperature and heat-re-sistant STRATO-THERM terminals and splices onto wire sizes 22-14 AWG.P/N: 46673

Hand Crimp ToolPIDG 16-14 AWGP/N: 47387

12-10G HAND RATCHET CRIMP TOOLCRIMPS FOLLOWING AMP CONNECTORS:• PIDG Type ring terminals, butt splices & wire caps.• PLASTI-GRIP terminals• PIDG Radiation Resistant terminals & splicesP/N: 59239-4

“T” HEAD CRIMP TOOLT-HEAD CRIMP TOOL 22-14GA. Red, Blue, Yellow Ring Terminals & Butt Splices, Long HandlesP/N: 59250

TOOLs

14


Fax: 1-800-828-0623

http://www.edmo.com

Cable Tie Guns

Cable Tie GunThe MK7 is made of polycarbonate, positive cut off feature ensures burr free edge. P/N: MK7

TYTON TWISTER Cable Tie GunThe Tyton Twister is lightweight and economical, fits into your pocket.P/N: TWT-1

AF8 StandardAdjustable Crimp Tools

UPPER RANGE CRIMP TOOLThe DMC AF8 qualified to MIL-DTL-22520/1, has virtually limitless application within the specified wire range of 12 through 26 AWG. Over a thousand turret heads or positioners are available to adapt the tool frame to your specific military or proprietary contact/wire combina-tion. The 8 impression crimp, which is standard in the AF8, assures absolute maximum tensile strength with almost every closed barrel contact. in addition, special indent configurations are available upon request.

The precision ratchet controls cycling of the tool in both directions of handle movement. This assures the same accurate crimp every time. It’s like having a quality control inspector at every work station.

Positive crimp depth is controlled by an 8 posi-tion selector knob conveniently located on the tool frame. The operator simply dials the desired step for the wire being used. This setting can be secured by use of a locking pin or safety wire. The carefully engineered design achieves the absolute maximum mechanical advantage; along with the tool’s light weight, operator fatigue is minimized.

The AF8 measures 9 3/4” x 2 ½” x 1 ¼” approxi-mately and weighs 15 oz.

For proper operation the tool frame must be mated with one of the following optional ac-cessories: a military head (TH-XXX Part No. Series), a turret head (TM-XXX series), a posi-tioner (TP-XXX series), or a universal head (part No. UH2-5). This is done simply by orienting the head in the keyed position, and by tightening the hex socket screws provided as part of the head.

A permanent dataplate is affixed to all turret heads and positioners. This plate lists specific contact part numbers, the corresponding posi-tion color code (for 3 position turret heads), and suggested selector depth settings for the wire size being used.

The universal head is ideally suited for lab work and prototype production applications. This head is attached in the same manner as ex-plained above. The selected contact is inserted through the entry hole on the opposite side of the tool frame from the head. The height adjust-ing screw is then rotated until the contact is in the proper position for crimping. The screw can be secured with the locknut provided. The wire sizes listed on the tool frame selector knob can be used as a reference starting point; however, some testing will be necessary to determine the optimum selector setting for your contact/wire combination.

Periodic gaging is recommended to insure accurate calibration. This can be done easily by setting the tool selector knob to position #4, and checking indenter closure with M22520/3-1 “GO-/NO-GO” gage (DMC part no. G125).Other than keeping the unit clean and properly stored when not in service, no operator mainte-nance is required. DMC offers complete factory service by knowledgeable technicians within a reasonable turnaround time. Complete instruc-tions concerning the use, care and warranty are supplied with each tool. Additional copies are available on request.

P/N: MIL SPEC: DESCRIPTION:AF8 M22520/1-01 Tool FrameTH1A M22520/1-02 TurretTH4 M22520/1-03 TurretTH4 M22520/1-04 TurretTH4 M22520/1-05 Universal PositionerTH4 M22520/1-06 PositionerTH4 M22520/1-07 PositionerTH4 M22520/1-08 TurretTH4 M22520/1-09 PositionerTH4 M22520/1-10 PositionerTH4 M22520/1-11 PositionerTH270 M22520/1-12 TurretTH285 M22520/1-13 TurretTP485 M22520/1-15 PositionerTP513 M22520/1-16 PositionerTP651 M22520/1-17 PositionerG125 M22520/3-1 GageUH2-5 M22520/1-05 Positioner

AFM8 MiniatureAdjustable Crimp Tools

LOWER RANGE CRIMP TOOLThe DMC AFM8 is designed for most of the miniature and sub-miniature connector types that are so widely used in all type of electronic systems. Originally developed for the Air Force, the AFM8 meets the need for a miniature tool accommodating wire sizes 20 through 32 AWG.

The AFM8 gives a Mil-Stan-dard 8 impress-ing crimp, which assures maximum tensile strength. The cycle controlled precision ratchet assures consistently accurate crimps every time. The tool frame has a built-in 8 step selector knob for ease in dialing the connect crimp depth setting for the wire being used.

Positioners adapt the tool frame to a particular application. The data plate on each positioner designates which contacts the positioner accom-modates for its wire size and indicates selector position. Crimp depth is dialed on the 8 step selector knob by merely raising the knob and rotating it to the proper position. The positioner is easily removed and changed.

Periodic gaging is recommended to insure ac-curate calibration. This is easily accomplished with the M22520/3-1 “G0/NO-GO” gage (DMC part no. G125). The AFM8 is 6 ¾” in length and weighs approximately 10 oz.

Other than keeping the tool clean and properly stored when not in use, no operator mainte-nance is required. DMC’s complete factory service is available. Complete instructions con-cerning the use, care and warranty are supplied with each tool. Additional copies are available from the factory.

P/N: MIL SPEC: DESCRIPTION:AFM8 M22520/2-01 Tool FrameK1-S M22520/2-02 PositionerK60S M22520/2-03 PositionerK151 M22520/2-04 PositionerK3 M22520/2-05 PositionerK41 M22520/2-06 PositionerK40 M22520/2-07 PositionerK13-1 M22520/2-08 PositionerK42 M22520/2-09 PositionerK43 M22520/2-10 PositionerK287 M22520/2-11 PositionerK286 M22520/2-12 PositionerK338 M22520/2-13 PositionerK340 M22520/2-14 PositionerK341 M22520/2-15 PositionerK339 M22520/2-16 PositionerK342 M22520/2-17 PositionerK343 M22520/2-18 PositionerK330-2 M22520/2-19 PositionerK331-2 M22520/2-20 PositionerK267-1 M22520/2-23 PositionerK75S-1 M22520/2-24 PositionerK269-1 M22520/2-27 PositionerK406 M22520/2-31 PositionerK496 M22520/2-32 PositionerK323 M22520/2-34 PositionerK532-1 M22520/2-35 PositionerK473 M22520/2-36 PositionerG125 M22520/3-1 Gage

TOOLs

14



MH800 ULTRAPRECISION CRIMP TOOL

All DMC tools are designed and built to the high-est standards of precision and quality, but some applications call for more.

One such case is miniature and subminiature contacts which have extremely thin wire barrel dimensions. The answer to this demand is the model MH800 Ultra Precision Crimp Tool which utilizes the same basic components as the Model AFM8 (M22520/2-01) Crimp Tool with tighter gaging tolerances and a special indenter tip configuration that assures a uniform flow of metal during the crimping operation. The model MH800 accommodates wire sizes 20 through 32 AWG (the miniature to sub-miniature range). It accommodates the K series of M22520-2-XX positioners and is easily identified by a distinc-tive orange handle grip. It is the same size and weight as model AFM8. Gaging is accomplished with the G100 “GO/NO-GO” gage.

MIDDLE RANGE CRIMP TOOL MH860M22520/7-01

Qualified to MIL-DTL-22520/7, the DMC MH860 is a recent addition to the military specification. It was developed to meet the demonstrated need for supporting the majority of electrical systems with one versatile crimp tool frame. The MH860 accepts the entire middle wire range of 16 through 28 AWG, with positioners which adapt it to virtually all applications consistent with others in the MIL-DTL-22520 family.

P/N: MIL SPEC: DESCRIP-TION:MH860 M22520/7-01 TOOL FRAME86-1S M22520/7-02 Positioner86-2 M225207-03 Positioner86-3 M22520/7-04 Positioner86-4 M22520/7-05 Positioner86-5 M22520/7-06 Positioner86-6 M22520/7-07 Positioner86-7 M225207-08 Positioner86-11S M225207-09 Positioner86-12S M225207-10 Positioner86-19 M22520/7-11 Positioner86-20 M22520/7-12 Positioner86-21 M22520/7-13 PositionerG145 M22520/3-3 GAGE

THE MIL-C-28840TOOLING

MIL-C-28840 connectors were developed for the Navy, for use with jacketed cable in shipboard applications. They are a high density circular connector series utilizing a high shock threaded coupling system with front release crimped contacts. For these connectors DMC has added a new crimping tool to its range, the M22520/34-01, and other tools as follows:

P/N: MIL SPEC: DESCRIPTION:39-000 M22520/34-01 Basic crimp tool39-102 M22520/34-02 Positioner DRK56-22A M81969/34-01 Removal tool

Pneumatic Crimp ToolsThe DMC Power Crimp tools WA27F, WA2P, and WA22 are direct equivalents of their cor-responding hand tools. They use the same turret heads or positioners, the gages and other accessories. As production needs grow, all that needs to be added is the tool frame itself. The resulting power capability ca in many instances compare with an automated system costing thousands of dollars more. The pneumatic tools are widely used in both military and proprietary programs. Their popularity has come about in part because of their unequaled reputation for trouble-free, dependable service and their cost saving and adaptability. Whether upper, middle or lower range, the power tools fulfill the same precise crimp requirements as the hand models. They use the same indenter configuration, the same gaging dimensions and selector settings. No additional operator training is necessary. Accurate calibration is maintained by a unique 8 step machined steel block that holds gaging tolerances far longer than the usual adjustment screw method. This solid gaging means high output with less downtime. The compact size and light weight of these tools allows them to be used easily as hand tools, as well as high production bench tools. The hand trigger is designed for equal ease of use by right or left handed operators. Bench mounted, the optional foot valve allows hands-free operation. The bench mount will allow the tool to be secured at virtually any angle for individual comfort, thereby minimizing operator fatigue. The foot valve, when installed in-line with an air supply, makes a portable system which is adaptable to any work bench. Air supply requirements are 80-120 PSI (5.5 to 8.0 atmospheres) clean dry air. The system uses standard air fitting readily available in most shops.

WA27F UPPER RANGE(EQUIVALENT TO AF8)

accommodates TH-XXXMIL-STD heads. TH-XXX series turret heads or TP-XXX series posi-tioners, length 10”, diameter 2 ¾”, weight 50 oz.

WA22P MIDDLE RANGE(EQUIVALENT TO MH860)

accommodates 86-XXX series positioners, length 8”, diameter 2 ¼”, weight 32 oz.

WA22 LOWER RANGE(EQUIVALENT TO AFM8)

accommodates K series positioners, length 8”, diameter 2 ¼”, weight 32 oz.• BENCH MOUNT BM-2• FOOT VALVE WA10

LARGE GAGE PNEUMATICCRIMP TOOLS

DMC ‘s heavy pneumatic crimp tool functions with the push of a button for operator ease. This heavy duty crimp tool accommodates large size contacts 8 through 0000 (AWG) and operates on standard 90-125 psi (5, 4, 16 BAR) shop air sources. It is engineered with this operator’s safety in mind and features a fully cycle control system. This tool is portable and needs no extra booster for large size contacts. The standard die assembly and locator are easily interchangeable with no special tool required. Custom dies and locators may be designed to specific require-ments. An operational foot valve is available upon request.

P/N: MIL SPEC: DESCRIPTION:WA23 M22520/23-01 CRIMP TOOL WA23-2 M22520/23-02 DIE ASSY. 8 WA23-3 M22520/23-03 DIE ASSY. 6 WA23-4 M22520/23-04 DIE ASSY. 4 WA23-5 M22520/23-05 DIE ASSY. 1/0 WA23-6 M22520/23-06 DIE ASSY. 2/0 WA23-7 M22520/23-07 DIE ASSY. 4/0 WA23-9 M22520/23-09 LOCATOR 8 WA23-10 M22520/23-10 LOCATOR 6

TOOLs

14


Fax: 1-800-828-0623

http://www.edmo.com

WA23-11 M22520/23-11 LOCATOR 4 WA23-12 M22520/23-12 Locator 4, 4N, 4G WA23-13 M22520/23-13 Locator 1/0 WA23-14 M22520/23-14 Locator 1/0, 1/0N WA23-15 M22520/23-15 Locator 2/0, 2/0N WA23-16 M22520/23-16 Locator 4/0, 4/0N

Open Frame Crimp ToolsM22520/5-01 (HX4) M22520/10-01 (HX3)

The DMC HX4 and HX3 series crimp tools feature a system of interchangeable dies which eliminate the need of separate fixed die crimp tools for each and every different application. Many maintenance and manufacturing concerns have standardized on one of these models, thus eliminating the cost associated with maintain-ing and calibrating bulky inventories of single purpose tools.Tremendous flexibility and cost advantages exist with this crimping system due to the wide variety of interchangeable dies which are available for these tool frames. As new requirements evolve, a new set of dies is all that’s required to meet this demand. A truly modern concept which will not require major change with time...only simple additions.Crimping dies are snapped into the tool frame and retained in place by internal spring clips. They may be permanently secured, if desired, by driving a roll pin into the holes provided.The tool frames are equipped with a posi-tive ratchet assembly which controls compete handle movement in both directions. Hexagonal crimp dies are available in a variety of combinations having single, double, and even triple cavity design. These dies accommodate most coaxial and tri-axial connectors and con-tacts conforming to MIL-C-39012, MIL-C-39029, and numerous proprietary configurations. Other designs are available for coaxial connections requiring different termination techniques.Dies in various crimp patterns are also avail-able for insulated and un-insulated terminal lugs, wire splices and end caps relating to M7928, MS17143, MS25036, MS25181, MS27429, MS25274, MS20659, M81824, MS21003 through MS21015, and commercial part numbers. Several power contacts too large for conventional hand tools are also covered by interchangeable dies for the standard tool frame (HX4). Typical Die SetIf your application requirement is not already covered by one of our standard dies our engi-neering department will be pleased to discuss a design to suit your needs.

The HX4 is 11” in length and weighs ap-proximately 21 oz. The HX3 is 9” in length and weighs 11 oz.

P/N: MIL-SPEC:HX4 M22520/5-01Y196 M22520/5-03Y152 M22520/5-04Y197 M22520/5-05Y203 M22520/5-06Y195 M22520/5-07Y215 M22520/5-08Y204P M22520/5-09Y189 M22520/5-10Y205P M22520/5-11

Y206P M22520/5-13Y207P M22520/5-15Y142 M22520/5-19Y149 M22520/5-21Y145 M22520/5-23Y110P M22520/5-25Y151 M22520/5-27Y109P M22520/5-29Y136 M22520/5-33Y137 M22520/5-35Y138 M22520/5-37Y139 M22520/5-39Y140 M22520/5-41Y141 M22520/5-43Y143 M22520/5-45Y144 M22520/5-47Y148 M22520/5-53Y102 M22520/5-55Y209P M22520/5-57Y208P M22520/5-59Y178 M22520/5-61Y501 M22520/5-100Y527 M22520/5-101Y539 M22520/5-102Y540 M22520/5-103

MIL-I-81969 Tool PartNumber Guide

Abbreviations:I = Installation ToolR = Removal ToolI/R = Installation & Removal ToolN/A = Not AvailableR = Rear ReleaseF = Front ReleaseR/F = Rear & Front Release

TOOLs

14



PelicanP/N: AFM8-KIT

Ask us about super tough Pelican™ cases for your Daniels™ tools!

TST-CR36 Hand HeldCrimping Repeater

Since 1979, Tri-Star has been aggressively engaged in thedesign and evolution of a family of automatic crimpers which literally revolutionized the con-nector assembly world.

(Daniels™ AFM8 Crimper Not Included)

Tri-Star Technologies is now pleased to present the latest nnovation that allows substantially increase productivity while crimping with most popular D M C m a n u a l crimp-ers, perfect crimp process, eliminate operator’s errors, improve ease of use in confined areas or while working on vertical harness boards, do away with foreign objects in work area, and completely eliminate inventory of crimp position-ers.

FEATURES• Works with DMC type handheld manual crimp-ers• Minimizes crimping cycle• Uses a preloaded cartridge with multiple contacts• Decrease setup time• Built-in crimp positioners• Works in any position (horizontal, vertical, upside down)• Prevents contact damage• Works with any contact sizes (16-22)• Works with any wire sizes (16AWG-26AWG)• Ease of switch contacts• 100% portable• Perfectly suits for work in confined areas or on vertical harness boards• Simplifies operator’s task• Prevents operator errors• Easy cartridge exchange• 100% manual operation. No air or electrical power required• Easy to mount on DMC crimper

P/N: Description:TST-CR36 Crimping Repeater For Daniels™ AFM8TST-CR36C Cartridge for TST-CR36TST-CR36I Cartridge Insert for TST-CR36

T–Head BatteryPowered Crimp Tool Kit

Consists of the battery–powered crimp tool (with the T–Head Adapter installed), as well as two rechargeable battery cartridges (1725839–1) to power the tool. Each kit has a battery charger. The T–Head Battery–Powered Crimp Tool Kit is designed to crimp PIDG and PLASTI–GRIPTerminals on wire sizes 26–14 AWG, and Spare Wire Caps on wire sizes 22–14 AWG. Refer to Figure 2 for product types and wire sizes.P/N: 1213803-1

Insertion &Extraction Tools

DANIELS REMOVAL TOOL - 3 PROBES Weight: 0.10 LBS

P/N: DRK110

DMC PROBE - YELLOWWeight: 0.05 LBSP/N: DRK105-122

DMC PROBE - BLUEWeight: 0.05 LBSP/N: DRK105-162

DMC PROBE - GREENWeight: 0.05 LBSP/N: DRK105-222

TOOLs

14


Fax: 1-800-828-0623

http://www.edmo.com

DMC PROBE - YELLOWWeight: 0.05 LBS

P/N: DRK10522M2


P/N: Description:465195-1 TYCO leaf extraction tool465195-2 TYCO leaf extraction tool (Molex Type)465199-1 TYCO blade extraction tool

Pin and socket extraction tool.P/N: 305183

Insertion & extraction tool with interchangeable tips. Tool includes handle, six tips, hex wrench & plug.P/N: 91285-1

Pin and socket extraction tool.P/N: Desc:91066-1 Green white91066-3 Blue white91066-4 Red white

91067-1 Green white - metal tip91067-2 Red white - metal tip

}}

PlasticExtraction

MetalExtraction


P/N: Description:M81969/101 22g, GRN/WHT/METAL TIPSM81969/102 20g, RED/WHT/METAL TIPSM81969/103 16g. BLUE/WHT/METAL TIPSM81969/104 22g, GRN/WHT/METAL TIPSM819691401 22g, GRN/WHT/PLASTIC TIPSM819691402 20g, RED/WHT/PLASTIC TIPSM819691403 16g, BLUE/WHT/PLASTIC TIP

M819691404 12g, YLW/WHT/PLASTIC TIPSM819691405 10g, GRAY/WHITE/PLASTICM819691406 8g, PLASTICM819691407 BLUE/PLASTICM819691408 #0/PLASTICM819691409 PLASTICM819691410 RED/ORANGE/PLASTICM819691411 20g, RED/WHT/PLASTIC TIPSM819691412 #8 PLASTICM8196916-2 16g, BLUE/WHTM8196916-3 12g, YLW/WHTM819691601 20g, RED/WHT/PLASTICM819691602 BLUE/WHITE/PLASTICM819691603 WHITE/YELLOW/PLASTICM819691604 23g, GRN/WHT/PLASTIC TIPSM819692902 8g, REDM819693901 20g, GRN/WHT/PLASTIC

Raychem “MTCP” Series Modular Rectangular connector insertion

& removal tool

Double-ended insertion & removal tool designed for size 22-20 pin (CTA-0093 & CTA-0166) and socket (CTA-0094 & CTA-0165) contacts installed in Raychem “MTCP” Series Modular Rectangular connectors.P/N: CTA-1160

RAYCHEM ARINC404 & 600 Connectors

Extraction ToolUsed to remove size 5 and size 9 coaxial con-tacts from ARINC 404 and 600 connectors.P/N: Description:91074-1 Extraction Tool

MATE-N-LOKInsertion Tool

The TYCO insertion tool for the MATE-N-LOK® pins. Contact sizes 20-24 AWG.

P/N: 91002-1

Double ModuleRemoval Tool

M81714/69-02 Double module removal tool de-signed for MIL-T-81714 Terminal Junction Mod-ules, Grounding Mod-ules, Power Distribution and Feedback Modules.P/N: CTJR12

INCERT TABEXTRACTION TOOL

This tool is used to extract AMP-TAB Male (tab) Terminals from AMP-TAB Quad (4-Tab) Con-nectors.P/N: 91017-3

Wire & Cable StrippersThe AMP Crimp BNC Coaxial Cable Strippers are compact and easy to use. Strip coaxial cable in one easy step with its handy replaceable blade cassette. Single & Dual BNC coax strip-pers available.P/N: Description:603995-1 Single Crimp Coaxial Cable Stripper603995-5 Dual Crimp Coaxial Cable Stripper603996-1 Replacement Blade (For 603995-1)

TOOLs

14



603996-4 Replacement Blade (For 603995-5)

Coaxial Cable StripperThe IDEAL PRO-AX Coaxial Cable Stripper is made of injection molded thermal plastic, with built-in tension spring, center pin cutter and slide adjustment to change from RG58, RG59 and RG6. Three level strips are made with interchangeable blade cassettes. Blades can be adjusted individually for various manufacturers cable dimensions. The PRO-AX is very easy to use, small and lightweight.

P/N: Description:45-520 Coaxial Cable Stripper45-522 Replacement Blade

RotateCable Size Adjuster

BladeCartridge

After

Allen Wrench

Before

Electrical PliersCOOPERTOOLS Quality stripper/cutter with needle nose plier tip. Puts a lot of tools in your hand at the same time. Scissors-action stripper gives you accuracy and speed.P/N: 105SCGV

Metal Snips

P/N: Description:M1R Wiss 9-3/4” Metalmaster® Compound Action Snips, Cuts Straight to Left

P/N: Description:M2R Wiss 9-3/4” Metalmaster® Compound Action Snips, Cuts Straight to Right

P/N: Description:M3R Wiss 9-3/4” Metalmaster® Compound Action Snips, Straight, Left, Right

P/N: Description:M6R Wiss 9-1/4” Metalmaster® Offset Snips, Cuts Straight to Left, Red Grips

P/N: Description:M7R Wiss 9-1/4” Metalmaster® Offset Snips, Cuts Straight to Right, Green Grips

Wire Stripper

IDEAL Wire StripperQuality stripper/cutter with needle nose plier tip. Puts a lot of tools in your hand at the same time. Scissors-action stripper gives you accuracy and speed.P/N: 45-616

Twisted StripperShielded Pair WirePreparation Tool

There is finally a tool to quickly strip the twisted shielded pair wires in your avionics installations!

For years, Mil-Spec Tefzel twisted - shielded pair wire defied every wire stripper the avion-ics technician had at his disposal. He usually resorted to a straight razor or X-Acto knife to slit the outer jacket - a time consuming and sometimes bloody job. With the increased use of RS-232, ARINC 429, and other types of data busses in todays aircraft electronics, this type of wire is now a major component of many avion-ics installations. The Twisted Stripper utilizes two specially shaped dies with integral cutting blades that are attached to two spring-loaded arms mounted to a free-rotating core. The dies are designed to match the outer jacket profile of the wire being stripped.

Tool operation is simple:1. Adjust the integral strip length gauge by loosening the collet nut and sliding the wire stop to the desired length.2. Insert the wire into the tool until it contacts the internal wire stop.3. Clamp the dies around the wire by pushing the thumb actuator forward. 4. Pull the wire stripper along the length of wire. As the stripper moves along the helical jacket, the dies/blades rotationally track the wire’s profile and create two helical slits in the outer jacket. A simple twist of the slitted portion results in the jacket halves separating as shown.P/N: TSK-7000A

Twisted StripperDie Sets

P/N: TDA-18-2 TSK-7000 DIE SET/18G 2CP/N: TDA-20-2 TSK-7000 DIE SET/20G 2CP/N: TDA-22-2 TSK-7000 DIE SET/22G 2CP/N: TDA-24-2 TSK-7000 DIE SET/24G 2C

TOOLs

14


Fax: 1-800-828-0623

http://www.edmo.com

Fox and Hound 3 DeluxeWire & Cable Tracing Kit

Fox and Hound 3 Deluxe Wire & Cable Tracing Kit. NEWARK InONE SERVICESKit Includes:• 3380 Fox• 3392 Hound 3 Inductive Tracer Probe• Carrying Case

P/N: 3397

DANIELS RotarySAFE-T-CABLE Tool Kit.032 ROTARY SAFE-T-CABLE TOOL KIT

Includes:• 1 Safe-T-Cable Tool w/3” Nose Attached (.032)• 1 7” Nose Assembly (.032)• 100 Safe-T-Cable (.032 x 18”)• 1 Safe-T-Cable Torque Verification Block• 1 9/64” Hex Wrench• 1 Screwdriver• 1 Diagonal Cutter/Gripper• 1 Spanner ToolP/N: DMC1000-4R

.040 ROTARYSAFE-T-CABLE TOOL KIT

Includes:• 1 Safe-T-Cable Tool w/7” Nose Attached (.040)• 100 Safe-T-Cable (.040 x 18”)• 1 Safe-T-Cable Torque Verification Block• 1 9/64” Hex Wrench• 1 Screwdriver• 1 Diagonal Cutter/Gripper• 1 Spanner ToolP/N: DMC100011R

.020/.032 ROTARY SAFE-T-CABLE TOOL KITIncludes:• 1 Safe-T-Cable Tool w/3” Nose Attached (.020)• 1 Safe-T-Cable Tool w/3” Nose Attached (.032)• 1 7” Nose Assembly (.020)• 1 7” Nose Assembly (.032)• 100 Safe-T-Cable (.020 x 18”)• 100 Safe-T-Cable (.032 x 18”)• 50 Self-Looping Safe-T-Cable (.032 x 18”)• 1 Safe-T-Cable Torque Verification Block• 1 9/64” Hex Wrench• 50 Elongated Ferrules (.032)• 1 Spanner ToolP/N: DMC100020R

Wire Cutters& Pliers

IDEAL PREMIUMT CUTTER

• Wire range up to 1/2 inch O.D. fine stranded wire, and #10 AWG solid wire• Comfort-grip handles• Hardened steel, sheer-type blades• Spring-loaded automatic opening• Convenient pliers nose for extra gripping strengthP/N: 45-223

COOPERTOOLS

Low profile, general purpose shearcutter.

P/N: 170M

Low profile, general purpose shearcutter.

Same as the 170M above, but with safety clip.

P/N: 175M

Heavy duty shearcutterfor IC pins, cables, harnesses.

P/N: 1178M

Heavy duty shearcutterSame as the 1178M above, but with safety clip.

P/N: 2178M

Thin profile longreach pliers

Serrated Jaws.

P/N: 378M

IDEAL 20-30 AWGWIRE STRIPPER

Stripmaster 20-30 AWG Wire Stripper.P/N: 45-098

IDEAL StripmasterLite Wire Stripper

24 to 30 AWGFeatures:• Knife-type blades• Cleanly strips wire up to 7/8 in. (22mm)• Requires one third less hand pressure for each strip• Eliminates nicking, cutting, and fraying of wire• Wire gripper holds wire centered in holeP/N: 45-672

TOOLs

14



CUSTOM STRIPMASTER16-26 AWG

P/N: 45-171

WIRE STRIPPER16-26 AWG

• Strips 30 through 10 AWG solid or stranded wire• Mil-spec die-type blades allow precision strip-ping• Inner cutting hole sized to conductor and counter-bored holes sized to insulation• Replaceable grippers• Optional short stop latch and transparent wire stop• Cushioned, comfort grip handles• Gripper pads hold the wire securely in a cen-terline relationship with the blade• Custom Stripmaster® Lite is 3/4’s the size of Custom Stripmaster® Wire Stripper and strips 16 through 30 AWG solid or stranded wire45-174Custom Stripmaster® Lite requires one-third less hand pressure for each strip actuationP/N: 45-174

10-14 AWG WIRESTRIPPER

IDEAL Custom Stripmaster® Wire Stripper.• Strips 14 through 10 AWG solid or stranded wire• Mil-spec die-type blades allow precision stripping• Inner cutting hole sized to conductor and counter-bored holes sized to insulation• Replaceable grippers• Optional short stop latch and transparent wire stop• Cushioned, comfort grip handles• Gripper pads hold the wire securely in a centerline relationship with the bladeP/N: 45-176

Ideal CustomStripmaster Wire

Stripper, 16-26 AWGFor general purpose stripping of plastic, fiber-glass, teflon, and other hard-to-strip insulations. Exclusive, die-type blade design incorporates a counter-bored hole sized to the insulation and an inner cutting hold sized to the conductor. The counterbore hole acts as a collet, which com-presses the insulation slightly to center the con-ductor, and prevents the blade-cutting surface from contacting the surface of the conductor.

One squeeze operation-just insert wires be-

tween blades, squeeze handle, and release. Features sturdy, die-cast body and frame, and comfortable cushioned handgrips. The optional short-stop latch protects wire strands by limiting stripping stroke to 5/32” to retain the slug. It can be easily disengaged to allow full 7/8” stroke. The optional transparent wire stop provides uniform stripping length up to 1-1/8” max.P/N: Description:45-177 16-26 AWG Wire Stripper

Blade set for use with Ideal’s CustomStripmaster

• Features:MIL-W-81044 88A081X-Poly X• Three hole blade design• Die-type blades allow precision stripping• Contains counterbored hole sizes to insulation and inner stripping hole sized to conductor• Manufactured to assure accuracy and precision to meet tough MIL-specsP/N: 45-1611-1

IDEAL Ringer™ Shielded Cable Stripper

For precision stripping of most non-round shielded cable and other outer jackets, including extruded Teflon®, Kapton®, PVC and Kynar®, insulations. Spring-loaded head holds cable with consistently accurate tension, removing any need for adjustment. Fixed blades are sized to insulation to prevent inaccurate cuts. Heat-treat-ed, stainless-steel blades for long life.Cable diameters up to 1/2 in.P/N: 45-400

Two-Step CoaxCable Stripper

Coaxial Cable Stripper 1/8 in. to 7/32 in.(5.6mm - 3.2mm) O.D.• Lightweight, compact, cost-effective stripper is simple to operate• Adjustable blades can be set for any depth to help ensure nick-free strips• Use with twisted-pair wire, tightly wrapped stranded cables, CATV cable, CB antenna cable, SO, SJ, SJT, and other types of flexible power cords• Includes three straight and one round blade• Typical RG Cables: RG-58, CB Antenna CableP/N: 45-163

COAX CABLE STRIPPER 3/16 - 5/16”

These lightweight, compact strippers are simple to operate. The adjustable blades can be set for any depth to help assure nick-free strips to specification on a variety of coaxial cable up to 9/16” diameter. Also used for shielded twisted-pair wire, tightly wrapped stranded cables, CATV cable, CB antenna cable, SO, SJ, SJT, and other types of flexible power cords. Each stripper comes complete with a full set of blades consisting of three straight and one round blade.P/N: 45-165

Ratchet Crimper For08-03-034 Crimp

TerminalsKK-156 30-18 AWG MOLEX RATCHET CRIMPER• A full cycle ratcheting hand tool ensures complete crimps• Ergonomic soft grip handles for comfortable crimping• A precision user-friendly terminal locator wire stop holds terminals in the proper crimping position• This tool is WHMA-IPCA620 Class 2 & RoHS compliantP/N: 63811-6600

TOOLs

14


Fax: 1-800-828-0623

http://www.edmo.com

Hand Insertion Tool For08-03-034

Crimp TerminalsRADAR inexpensive, manual tool is lightweight and easy to use in the placement and/or re-moval of a terminal in a housing.P/N: 11-02-0008

MOLEX EXTRACTION TOOLP/N: Description:11-03-0002 .062 TERM

11-03-0003

11-03-0043 Micro-Fit 3.0

EXTRACTION TOOLRADAR Removal tool kit designed for size 20, 16 & 12 pin and socket contacts installed in MIL-C-5015, MIL-C-26482, MIL-C-26500 and MIL-C-83723 front release circular connectors. Case contains one (1) handle and three (3) interchangeable tips.P/N: ATK-2120

Allen & Spline Kits

COOPERTOOLSAllen Hex Roll-up KitA complete set of Allen hex socket type and metric size screwdrivers in a roll-up canvas case that is plastic coated for long wear and protection.P/N: LN-11

Spline Key Wrench KitSet of the six most popular “Spline” type wrenches. For use on many electronic devices. Made of alloy steel. Tools fit No. 4 to 1/4” set screws and No. 2 to No. 8 cap screws. Com-plete with handy carryingpouch.P/N: 5070

LEATHERMANMultipurpose Tools

WAVE• 100% Stainless Steel • Needlenose Pliers• Regular Pliers • Wire Cutters • Hard-Wire Cutters • Clip-Point Knife • Serrated Knife • Saw • Scissors • Wood/Metal File •

Dia-mond-Coated File • Large Bit Driver • Small Bit Driver • 2 Double-End Bits • Large Screwdriver • Ruler (8 inch/19 cm) • Bottle/Can Opener • Wire Stripper • Lanyard Attachment • 4 inches • 8.5 ouncesP/N: 830037

Wave Tool AdapterP/N: Description:65010301 Standard tool adapter930831 PST (leather combo sheath)930851 Super tool (leather combo sheath)930871 Wave (leather combo sheath)930841 PST (nylon combo sheath)930861 Super tool (nylon combo sheath)930881 Wave (nylon combo sheath)Specs: The standard tool adapter fits the PST, PST II, Super tool, Slideclip, Flair and Pulse models. Just slide the tool adapter over the plier jaws and close the handles to provide a 1/4” hex drive with a safe, comfortable grip. Each tool adapter permits a wide variety of hex bits to be used with Leatherman tools. Any bit that fits a standard 1/4” drive can be used with either tool adapter. For unmatched usefulness and torque, they lock in straight, 45-degree and 90-degree positions. No other multipurpose tool adapter has this capability. The tool adapter comes in our Standard Kit that includes a compact clip-on carrying case and six screw bits: #0 & #3 Phil-lips, #1 & #2 Robertson (square), #15 Torx & #8-10 slotted.

Also available are packaging configurations combining the Tool Adapter with the Super Tool, PST II or original PST. Each combo pack con-tains the adapter, bits, bit holder and a tool, all fitting in a compact leather or nylon belt sheath (included). These combos put the ultimate in versatility and convenience in the palm of your hand. 1/4” hex drive, 3 locking positions, lanyard hole, 3-3/4” (8.3 cm) length, 1.6 oz (45 grams) weight

StandardTool

Adapter

WaveTool

Adapter

CrunchP/N: Description:68010101 Crunch (w/leather sheath)68010201 Crunch (w/nylon sheath)Specs: Locking pliers, wire cutters, hard-wire cutters, serrated knife, wood/metal file, small-medium & large screwdriver, phillips screw-driver, hex bit driver, wire stripper, bottle opener, ruler (inch/metric), lanyard attachment.

TOOLs

14



BLAST

• Zytel® Contoured Handle Grips • Needlenose Pliers • Regular Pliers • Wire Cutters • Hard-Wire Cutters • Clip-Point

Knife • Wood/Metal File • Saw • Scissors • Large Screwdriver • Small Screw-driver • Phillips Screwdriver • Small Bit Driver • Phillips and Flat Tip • Eyeglasses Screwdriver Bit • Ruler (8 inch/19 cm) • Bottle/Can Opener • Wire Stripper • Lanyard Attachment • 4 inches • 6.9 ouncesP/N: 830030

FUSE• Zytel® Contoured Handle Grips • Needlenose Pliers • Regular Pliers • Wire Cut-ters • Hard-Wire Cutters • Clip-Point Knife • Scis-

sors • Large Screwdriver • Small Screwdriver • Phil-lips Screwdriver • Ruler (8 inch/19 cm) • Bottle/Can Opener • Wire Stripper • Lanyard Attach-ment • 4 inches • 6 ounces

P/N: Description:830023 With Knife, Black Leather Sheath830024 With Knife, Black Nylon Sheath830597 Without Knife, Black Leather Sheath830251 Without Knife, Black Nylon Sheath

KICK• Zytel® Contoured Handle Grips • Needle-nose Pliers • Regular Pliers • Wire Cutters • Hard-Wire Cutters • Clip-Point

Knife • Large Screwdriver • Small Screwdriver• Phillips Screwdriver • Ruler (8 inch/19 cm) • Bottle/Can Opener • Wire Stripper • Lanyard Attachment • 4 inches • 5.2 ouncesP/N: Sheath:830016 Black Leather830017 Black Nylon830599 w/removable clip & screw Black Leather830601 w/removable clip & screw Black Nylon

SKELETOOL, CXThe Skeletool is a cool indoor plus outdoor multi- tool from Leatherman’s. You might think what’s its use? Going by the looks, it for sure gives an impression to be made for shedding blood, meant to be used by gangsters. Wait a while, it is actually meant for...well, though con-ventional but...depends on the use, especially for those who don’t like carrying each individual tool, knowing they can be clubbed together and made effective. The Skeletool happens to be a great idea come to life.

Features:1) Knife2) Screwdriver3) Pliers4) Bottle opener5) Bit driver6) Carabineer7) Stainless steel blade

Weight:The most important thing to acknowledge about the Skeletool is its weight. Weighing at 5 ounces, Leatherman claims this is the lightest full-size multi-tool ever (less than full-size being those tiny keychain models).

Looks so rigid and obdurate, the Skeletool feels almost comfortable to hold. The design is irregular, inclined slightly when it’s closed, and curvature to fit the shape of your hand when the handles are unfastened. There are tiny design updates crammed into every millimeter of its design, like the fact that the screwdriver isn’t hinged and tucked away, but in a fixed posi-tion, ready to be used as soon as you open the tool. And the extra double-sided bit fits into the handle, giving you a total of four bit sizes (two flathead and two Phillips).P/N: Description:830845 No Sheath830948 Black Standard Nylon830849 CX No Sheath830950 CX Black Standard Nylon

Charge TTi

Stronger than the Rest! Premium titanium handles, an S30V clip-point knife (among strongest on the market today), a cutting

hook, all lock-ing blades, and large and small bit drivers - all this is en-gineered into one powerful tool, the Leatherman Charge TTi.

The lightweight, corrosion-resistant handles of the Charge TTi are crafted from premium, alloyed titanium. Sculpted for extra handle comfort, they’re tough and comfortable. Bronze brushings ensure outer blades open smoothly, while interior blades rotate easily - one at a time. Larger thumb holes let you open your knives in a flash - with just one hand. The Charge TTi comes with your choice of a nylon or leather sheath that will carry your tool in the open or closed position, and two side pockets hold extras - even a mini-flashlight. An inside back pocket holds the included bits, and has room for a full Bit Kit (sold separately), giving you up to 42 bits to choose from.

Don’t want to wear a sheath? Clip your Charge to your jacket or car’s visor with the removable pocket clip. Or, use the quick-release lanyard ring to safely keep the tool on a lanyard. Leatherman Charge TTi Features:• Titanium Handles • Needlenose Pliers • Regu-lar Pliers • Wire Cutters • Hard-Wire Cutters • Crimper • S30V Clip-Point Knife • Serrated Knife • Cutting Hook • Saw • Wood/Metal File • Diamond-Coated File • Scissors • Large Bit Driver • Small Bit Driver • Large Screwdriver • 8 Double-End Bits • Ruler (8 in / 19 cm) • Bottle/Can Opener • Wire Stripper • Fixed Lanyard Ring • Quick-Release Lanyard Ring • Remov-able Pocket Clip

Included Bits:• Phillips & Flat Tip Eyeglasses Screwdriver • Phillips #1 - #2 & Screwdriver 3/16” • Hex 5/32” & 9/64” • Hex 1/8” & 7/64” • Hex 3/32” & 5/64” • Hex 1/16” & .050 • Robertson #2 & #3 • Screw-driver 1/8” & Torx #15• Weight: 8.2 oz / 232 grams• Length (Closed): 4 in / 10.2 cm• Materials: Stainless steel with titanium handles and bronze bushingP/N: Sheath:830682 Black Premium Leather830683 Black Premium Nylon

TOOLs

14


Fax: 1-800-828-0623

http://www.edmo.com

Charge ALXReady for Any Adventure or EmergencyPremium aerospace aluminum handles, a 154CM steel knife (the largest ever put into a 4 inch multi-tool), a powerful cutting hook, all locking blades, and large and small bit drivers - all this is engineered into one unique tool, the Leatherman Charge ALX.

The black, hard-anodized handles of the Charge ALX are made from an alloy used in the aero-space industry for its strength and light weight. Bronze brushings ensure outer blades open smoothly, while interior blades rotate easily - one at a time. Larger thumb holes let you open your knives in a flash - with just one hand.

The Charge ALX comes with your choice of a nylon or leather sheath that will carry your tool in the open or closed position, and two side pockets hold extras - even a mini-flashlight. An inside back pocket holds the included bits, and has room for a full Bit Kit (sold separately), giv-ing you up to 42 bits to choose from. Leatherman Charge ALX Features:• Hard-Anodized Aluminum Handles • Needle-nose Pliers • Regular Pliers • Wire Cutters • Hard-Wire Cutters • Crimper • 154CM Clip-Point Knife • Serrated Knife • Cutting Hook • Saw • Wood/Metal File • Diamond-Coated File • 2 Large Bit Drivers • Small Bit Driver • 9 Double-End Bits • Ruler (8 in / 19 cm) • Bottle/Can Opener • Wire Stripper • Fixed Lanyard Ring • Quick-Release Lanyard Ring • Removable Pocket Clip

Included Bits:• Phillips & Flat Tip Eyeglasses Screwdriver • Phillips #1 & #2 • Hex 5/32” & 9/64” • Hex 1/8” & 7/64” • Hex 3/32” & 5/64” • Hex 1/16” & .050 • Robertson #2 & #3 • Screwdriver 1/8” & Torx #15 • Screwdrivers 1/4” & 3/16”

• Weight: 8.3 oz / 235 grams• Length (Closed): 4 in / 10.2 cm• Materials: Stainless steel with aerospace alu-minum handles and bronze bushing.P/N: Sheath:830674 Black Premium Leather830675 Black Premium Nylon

Charge AL

The black, hard-anodized handles of the Charge AL are made from an aluminum alloy used in the aerospace industry for its strength and light weight. Bronze brushings ensure outer blades open smoothly, while interior blades rotate easily - one at a time. Larger thumb holes let you open your knives in a flash - with just one hand.

The Charge AL comes with your choice of a nylon or leather sheath that will carry your tool in the open or closed position, and two side pockets hold extras - even a mini-flashlight. An inside back pocket holds the included bits, and has room for a full Bit Kit (sold separately), giv-ing you up to 42 bits to choose from.

Don’t want to wear a sheath? Clip your Charge to your jacket or car’s visor with the removable pocket clip. Or, use the quick-release lanyard ring to safely keep the tool on a lanyard.

Leatherman Charge AL Features:• Hard-Anodized Aluminum Handles Needlenose Pliers • Regular Pliers • Wire Cutters • Hard-Wire Cutters • 154CM Clip-Point Knife • Ser-rated Knife • Saw • Scissors • Wood/Metal File • Diamond-Coated File • Large Bit Driver • Small Bit Driver • Large Screwdriver • 8 Double-End Bits • Ruler (8 in / 19 cm) • Bottle/Can Opener • Wire Stripper • Fixed Lanyard Ring • Quick-Release Lanyard Ring • Removable Pocket Clip

Included Bits:• Phillips & Flat Tip Eyeglasses Screwdriver • Phillips #1-2 & Screwdriver 3/16” • Hex 5/32” & 9/64” • Hex 1/8” & 7/64” • Hex 3/32” & 5/64” • Hex 1/16” & .050 • Robertson #2 & #3 • Screw-driver 1/8” & Torx #15

• Weight: 8.4 oz / 238 grams• Length (Closed): 4 in / 10.2 cm• Materials: Stainless steel with aerospace alu-minum handles and bronze bushing.P/N: Sheath:830662 Black Premium Leather830663 Black Premium Nylon

SurgeA Multi-Tool Powerhouse. Surge is a multi-tool powerhouse-built with tough new pliers, longer blades and easy-to-use locks. A unique blade exchanger comes with saw and diamond/wood file blades. Large and small bit drivers include double-ended bits. And 4 outside-opening blades give you quick access to the tools you use most. With these new features, plus Leath-erman’s strongest scissors yet, Surge is sure to make a splash at the work site.

The Surge comes with your choice of a leather or nylon sheath. The Leatherman Surge was awarded Best of the Test by Field & Stream magazine for “Multi-tools That Fit Your Hunting and Fishing Needs.” - June 2006.

Leatherman Surge Features:• Needlenose Pliers • Regular Pliers • Wire Cutters • Hard-Wire Cutters • Stranded-Wire Cutters • Electrical Crimper • Clip-

Point Knife • Serrated Knife • Scissors • Blade Ex-changer • Diamond File Blade • Wood File Blade • Saw Blade • Large Bit Driver • Small Bit Driver • 5/16” Screwdriver • Awl w/Thread Loop • Ruler (9 inches/22 cm) • Bottle/Can Opener • Wire Stripper • Lanyard Ring • Two Double-Ended Bits

Included Bits:• Philips #1-2 and Screwdriver 3/16” Bit • Philips and Flat Tip Eyeglasses Screwdriver Bit

• Weight: 12.5 ounces / 355 grams• Length (Closed): 4.5 inches / 11.5 cm• Materials: 100% stainless steelP/N: Sheath:830158 Black Leather830159 Black Nylon

CoreOne Solid Tool for All Your Toughest JobsThe Leatherman Core is an updated version of the Super Tool 200 with stronger pliers, longer knife blades and three wire-cutting surfaces. Along with these beefed-up features, Core has comfortable handles, easy-to-use locks, and blades that open one at a time. And, Core is the first Leatherman multi-tool to feature hollow-ground screwdrivers in the standard sizes professionals use. Core comes with your choice of a nylon or leather sheath.

Leatherman Core Features:• Needlenose Pli-ers • Regular Pli-ers Wire Cutters Hard-Wire

Cutters Strand-ed-Wire Cutters Electrical Crimper • Clip-Point Knife • Serrated Knife • Saw • Wood/Metal File • 5/16” Screwdriver • 7/32” Screwdriver • 1/8” Screwdriver • Phillips Screwdriver • Awl with Thread Loop • Ruler (9 inch/22 cm) • Bottle/Can Opener • Wire Stripper • Lanyard Ring

• Weight: 10.8 ounces / 307 grams• Length (Closed): 4.5 inches / 11.5 cm• Materials: Stainless steel with bronze and steel brushingsP/N: Sheath:830144 Black Leather830145 Black Nylon

MICRAThe Leatherman Micra offers spring-action scissors along with nine additional personal-care features. It attaches easily to key rings for speedy access and quick fixes. A favorite all over the world, Micra is available with your choice of gray, black, blue, green or red alumi-num in addition to the standard stainless finish.

Don’t let the size fool you - Micra is engineered with the same rigorous standards that earn the name Leather-man. The Micra is a very popular gradu-ation or grooms-man gift - engraved or plain. Leatherman MicraFeatures:• Scissors • Clip-Point Knife • Tweezers • Nail File/Cleaner • Flat Phillips Screwdriver • Extra Small Screwdriver • Medium Screwdriver • Bottle Opener • Ruler (Inches/Met-ric) • Lanyard Attachment• Weight: 1.75 ounces / 50 grams• Length (Closed): 2.5 inches / 6.35 cm

TOOLs

14



• Materials: 100% stainless steel (Optimum grade hardness for each tool/blade)P/N: Description:64240101K Blue Translucent Handle64250101K Green Translucent Handle64320101K Black Aluminum Handle64330101K Red Aluminum Handle64340101K Blue Aluminum Handle64350101K Green Aluminum Handle64380101K Gray Aluminum Handle

SQUIRT S4Redefining the Term “Ultra-Compact”The key-chain size Leatherman Squirt S4 gives you the convenience of full-sized tools in one handy little package.

Sharp blades help our scissors cut even fine materials. Beveled edges allow a close cut - especially important for a neat trim. Ad-ditional features - tweezers, knife, screw-drivers and more - make quick work of everyday tasks. And at a mere 2.25 inches, this zippy little number does a great job of staying out of the way until you need it.

The Squirt S4 is available in “Glacier” blue, “In-ferno” red, “Powder” pink and “Storm” gray. Leatherman Squirt S4 Features:• Scissors • Straight Knife • Extra-Small Screw-driver • Flat Phillips Screwdriver • Nail File/Cleaner • Bottle Opener • Key Ring Attachment • Tweezers • Ruler

• Weight: 1.9 ounces / 54 grams• Length (Closed): 2.25 inches / 5.75 cm• Materials: Stainless steel with anodized alumi-num scalesP/N: Description:81030001 S4, Inferno Red81040001 S4, Glacier Blue81080001 S4, Storm Gray

SQUIRT P4Tiny. Tough. 100% Leatherman.The Leatherman Squirt P4 is the first miniature pliers multi-tool tough enough to be a Leather-man. Don’t be fooled by its size - the P4 can handle big jobs and still fit into tiny spaces. Spring-action pliers, wire cutters, three screw-drivers and a knife blade provide the support of larger tools. The key ring attachment offers the flexibility to place it on your key chain, backpack or even a zipper. A file, opener and awl round out the tool. Just two ounces, it’s light enough to take anywhere. Fits nicely on a key ring.

The Squirt P4 is available in “Glacier” blue, “Inferno” red, “Powder” pink, and “Storm” gray. Leatherman Squirt P4 Features:• Needlenose Pliers • Straight Knife • Wire Cutters • Extra Small Screwdriver • Medium Screwdriver • Small Flat Phillips Screwdriver • Single-Cut File • Cross-Cut File • Opener • Lanyard Attachment • Awl

• Weight: 2 ounces / 57 grams• Length (Closed): 2.25 inches / 5.75 cm• Materials: Stainless steel with anodizedaluminum scalesP/N: Description:80030001 NO SHEATH/RED80040001 NO SHEATH/BLUE 80080001 NO SHEATH/GRAY

JUICE C2The Leatherman Juice C2 is loaded with the basic ingredients of all Juice models - needle-nose pliers, wire cutters, four screwdrivers and a knife blade. This extremely clever little devil also provides easy outside access to a professional-style corkscrew and bottle/can opener. Built on a compact frame, the C2 blazes through chores around the house or out on the town. A lanyard ring makes it easy to fasten the C2 almost anywhere. The C2 is available in “Inferno” red or “Storm” gray.

Leatherman Juice C2 Features:• Needlenose Pliers • Straight Knife • Wire Cut-ters • Hard-Wire Cutters • Extra-Small Screw-driver • Small Screwdriver • Medium/Large Screwdriver • Phillips Screwdriver • Lanyard Attachment • Can/Bottle Opener • Corkscrew with Assist

• Weight: 4.3 ounces / 122 grams• Length (Closed): 3.25 inches / 8.25 cm• Materials: Stainless steel with anodized alumi-num scalesP/N: Description: Sheath:70101011K C2, Inferno Red Black Leather70108011K C2, Storm Gray Black Leather

JUICE S2The Leatherman Juice S2 maintains a cutting edge with specially serrated scissors. Fine ridges at the tips make snipping through items such as thread, fishing line or even flowers easier and more precise. The S2 was created in the same frame as the C2, with comfortable anodized handles. Like the rest of the Juice line, the S2 features needlenose pliers, wire cutters, four screwdrivers and a knife blade. The lanyard ring gives easy access to the tool anytime you needed. The S2 is available in “Flame” orange or “Storm” gray.

Leatherman Juice S2 Features:• Needlenose Pliers • Straight Knife • Wire Cut-ters • Hard-Wire Cutters • Extra-Small Screw-

driver • Small Screwdriver • Medium/Large Screwdriver • Phillips Screwdriver • Lanyard Attachment • Can/Bottle Opener • Scissors

• Weight: 4.4 ounces / 125 grams• Length (Closed): 3.25 inches / 8.25 cm• Materials: Stainless steel with anodized alumi-num scalesP/N: Description: Sheath:70202011K S2, Flame Orange Black Leather70208011K S2, Storm Gray Black Leather

JUICE CS4

Everything You Need for Busy Days - Indoors and Out. The Leatherman Juice Cs4 is versatility at your fingertips. Within the comfortable anodized aluminum handles you’ll find needle-nose pliers, wire cutters and four screwdrivers. A quick-access knife, saw and awl tackle heavy lodes, while specially serrated scissors, a bottle/can opener and a professional corkscrew see to more entertaining affairs. Comes with a conve-nient lanyard ring. The Juice Cs4 is available in “Glacier” blue and “Storm” gray.

Leatherman Juice Cs4 Features:• Needlenose Pliers • Straight Knife • Wire Cut-ters • Hard-Wire Cutters • Extra-Small Screw-driver • Small Screwdriver • Medium/Large Screwdriver • Phillips Screwdriver • Lanyard Attachment • Can/Bottle Opener • Corkscrew with Assist • Scissors • Saw

• Weight: 5.5 ounces / 156 grams• Length (Closed): 3.25 inches / 8.25 cm• Materials: Stainless steel with anodized alumi-num scalesP/N: Description: Sheath:74204011K CS4, Glacier Blue Black Leather74208011K CS4, Storm Gray Black Leather

JUICE Xe6For Those Who Want It All, The Leatherman Juice Xe6 is filled with the most features avail-able in the juice platform, and is just shy of seven ounces. The Xe6 requires more than 400 manufacturing steps to produce. Two knives, four screwdrivers, a diamond-coated file, saw and needlenose pliers make sure you’ll be ready for any job. In the meantime, Leatherman’s specially serrated scissors, professional style corkscrew and bottle/can opener provide all you need for life’s celebratory moments. A cross-cut file, wire cutters and awl round out Leatherman’s biggest Juice. The Juice Xe6 is available in “Thunder” purple and “Storm” gray.

TOOLs

14


Fax: 1-800-828-0623

http://www.edmo.com

Leatherman Juice Xe6 Features:• Needlenose Pliers • Regular Pliers • Straight Knife • Serrated Knife • Saw • Wire Cutters • Hard-Wire Cutters • Extra-Small Screwdriver • Small Screwdriver • Medium/Large Screwdriver • Phillips Screwdriver • Diamond-Coated File • Wood/Metal File • Lanyard Ring • Can/Bottle Opener • Corkscrew with Assist • Scissors • Awl

• Weight: 6.7 ounces / 190 grams• Length (Closed): 3.25 inches / 8.25 cm• Materials: Stainless steel with anodized aluminum scalesP/N: Description: Sheath:78105011K Thunder Purple Black Leather78108011K Storm Gray Black Leather

THREADER, WIRE,FOR HARNESS

Features:• Wire threader designed for threading wires into an already tied harness• 300 Series stainless steel construction• Made in America for superior qualityP/N: MDA-3792

CABLE STRIPPER/1” DIA.Round cable tool can be used on single or mul-tiple conductor cable up to 1.75” in diameter.P/N: 606700-1

Screwdrivers

Pocket Clip Style Round Blade ScrewdriverThe blade is made from AISI 6150 chrome vana-dium steel to last. The clip allows it to always be available whenever you need it.

P/N: Description:R-181 1/8” x 2” blade, Regular tip.P-12-S 1/8” x 2” blade, Phillips tip.

Stubby StyleScrew Drivers

P/N: Description:S-3161 3/16” x 1&1/4” blade, regular tip, 3&1/4” length.S-141 1/4” x 1&1/4” blade, regular tip, 3&1/4” length.SX-101 3/16” x 1&7/16” blade, #1 phillips tip.SX-102 1/4” x 1&5/16” blade, #2 phillips tip.

Super-tru Tip - Phillips Type Screwdrivers

The Super-tru black oxide tip gives longer wear life and minimizes damage to screw head recesses, especially in smaller fasteners.

P/N: Description:XST-101 #1 size tip, 3” blade, 6&5/8” overall.XST-102 #2 size tip, 4” blade, 8&1/8” overall.

Electricians RoundBlade Screwdrivers

Excellent quality chrome vanadium steel bladed screwdrivers in the most popular sizes.

P/N: Description:R-186 1/8”x6” blade, regular tip,8&5/8”lengthR-188 1/8”x8” blade, regular tip, 10&5/8” lengthR-1810 1/8”x10” blade, regular tip, 12&5/8” length

X-1010 Ex-long #1 phillips,13&5/8”overall lengthX-1020 Ex-long #2 phillips,14&1/8”overall length

Screwdrivers ForRecessed Socket Head

Screws/Allen Hex Socket

COOPERTOOLSP/N: Description:LN-22 5/64” x 4” blade, 6&5/8” overall.LN-23 3/32” x 4” blade, 7&1/8” overall.

Screw & Nutdrivers Sets

Hex Socket SetP/N: Description:PS-89 Xcelite 9-Piece Compact Hex Socket Screwdriver Set - Inch Sizes

Allen Hex Socket Type Screwdriver Set

XCELITE Eleven piece set.P/N: 99-PS-40

Multiple-SplineScrewdriver Set

A necessity for many repair jobs. Includes case and handle.P/N: 99-PS-60

Screwdriver &Nutdriver Set

This is a thirteen piece set that has both nut-driver and screwdriver blades. Inch sizes.P/N: 99-PS-50

TOOLs

14



Nutdriver SetHandle more jobs with fewer tools while saving bench space. Set comes with piggyback style torque amplifier handle and clear plastic case.P/N: PS-120

Screw GrabThis remarkable product from ALIGN RITE increases the grip between your screwdriver and a screw by 400%. A single dab of ScrewGrab creates a positive grip between metal surfaces. It virtually eliminates tool wear or rounding and deforming of fasteners. Whenever stubborn screws are a problem, ScrewGrab is the solu-tion. Use ScrewGrab with all types of screws, Slotted, Phillips, Allen, Square, Torx, Spline Keys and many more. Comes in a convenient .5 fl oz. tube.P/N: SG-1

Makesremoving

or tightening screws easy!

Get a grip on stripped screws! Increases torque by over 400%!• Works instantly• Wipes clean, non staining

Professional Tool Sets

COOOPERTOOLS 148 piece tool set. Sockets, wrenches, allen wrenches, pliers more! Great spare set of tools for travel, or to keep in a shop or airport vehicle, or for shop/building mainte-nance, or when a customer asks to “borrow a wrench” you don’t have to loan one of your good ones! Or Sell these in your Pilot Shop!Contains all the tools needed for most industrial applications, including 1/4”, 3/8”, and 1/2” quick-release ratcheting drives, with a wide selection of standard and deep sockets in the most com-mon SAE and metric sizes.

• Features 72-tooth ratchet drives for a 5° swing that’s perfect in tight spaces.• 3/8” drive 12-point sockets to increase fastener contact area for maximum torque.• Durable storage cases have raised-letter ID for each tool location, so they’ll stay organized, plus tools lock securely in place, a true benefit for work vehicles or other places where tools get knocked around.• All tools in this set meet stringent new ANSI and ASME specifications

Money back guarantee! If not completely satis-fied may be returned in “as new condition” for full refund.P/N: Description:CTK30SET 30 Piece SetCTK70MP 70 Piece SetCTK148MP 148 Piece SetCTK170CMP 170 Piece SetCTK170MP 170 Piece Set

InterchangeableNutdriver Handle

& ReamerInterchangeable Nutdriver Handle “T” TypeP/N: 99-4

Reamer

1/8” x 3/8” x 4” Length. Fits handle above.P/N: 99-38

Tweezers

General Duty TweezersP/N: Description:XHT-434 Smooth, sharp points, 4&3/4”XHT-412 Self closing/holding, 4&1/2”XHT-612 Self closing, for soldering/gluing, 6”XHT-678 Curved for better view of work, 6&7/8”XHT-700 Slender, tapered point, 7”XHT-600 Serrated points, 6”

Curved

Straight

Sharp point

Cross lock

Cross lock

Tweezer Tool KitFor the shop, to pick up small parts, start screws, to get into hard to reach places, fasten-ing springs. Numerous uses. GC ELECTRON-ICSP/N: 7950

KIT CONTAINS:6 1/2” Long Self Closing, Blunt Point (Serrated)6 1/2” Long Slide Lock, Smooth Points4 1/2” Long Fine Point

TOOLs

14


Fax: 1-800-828-0623

http://www.edmo.com

TweezersName: INS.TWEEZER (M81969/8-07)REV AWeight: 0.10 LBSP/N: DAK95-16A

Removal ToolName: REMOVAL TOOL - 0.120#Weight: 0.11 LBSP/N: DRK412

Removal / TweezerMIL P/N: M81969/8-04 REV AWeight: 0.14 LBSP/N: DRK95-22A

Spring Tools 18 Pc.Deluxe Impact

Driver SetUnique patented tool design, unlike anything on the market today. Combination Impact tool and Screwdriver for re-coining damaged, corroded or rusty fastener heads, and removing sticky, un-movable rusted fasteners or corroded threads. Pull back the ball holding the high tension spring, striking the fastener head, causing up to 5000 lbs. of impact on the fastener head – then use as screwdriver to remover fastener.

Impact Driver

Strike any frozen or rusted fastener with the Impact Driver using the high impact function to shock the stuck threads, which make the fastener easier to turn/remove by this standard screwdriver too! Kit comes with quick release magnetic extension, for applications that require a deeper reach.

Includes hardened, heat treated 2” insert bits in 16 most common tips but can be used with any hex specialty bit. Bits sizes included with the set

are Phillips 0, 1, 2, 3, slotted 5, 7-8, 8-9, square recess S1, S2, S3, Torx T20, T25, T30, nut driv-er ¼”, 5/16”, ¼” to hex to square socket adapter, and center punch. Always wear safety glasses when working with impact tools. Made in USA. Comes with sturdy organizer case. Wt 1 lb

Metal Working Set• Patented ringed grip no pinch design• Striking force up to 3,500 psi• Quality hardened steel construction• Limited lifetime warranty• Mark any material for easy drilling• Perfect for working in tight spaces• Ideal for removing rivets and rusty screws• Self centering punch for precision mounting• Professional grade tools

Made In The U.S.A.

Center Punch Tool

Creates deep indentation for drilling or making pilot holes.P/N: 28R00-1

Cold Chisel In Use

ColdChiselTool5/16” Coldchisel toremove rivets,screws orother metalfasteners.P/N: 44R10-1

PrickIn Use

PrickPunchToolCreates slightaccurate indentationfor spot marking.P/N: 26R00-1

High Speed Center Punch Tool

Hardened to Rockwell Rc65 for precision mark-ing of hard steel.P/N: 28R45-1

Self Centering Center Punch Tool

Creates perfectly centered hoes in metal for mounting hardware.P/N: 38R04-1

Professional GradeI.D. Stamper Set

Easily mark pistions and other aircraft parts for identification. Also great for labeling power tools and other valuables. Works great on a wide va-riety of mild steel and other surfaces. The inter-changeable bits are marked with their character for easy alignment & ues. Comes with organizer case and 10 extra spaces for other bits.P/N: IDRK905

TOOLs

14



I.D. Stamper In Use

P/N: Description:44R10-1 Cold Chisel Tool28R00-1 Single ended Center Punch28R45-1 High speed steel Center Punch32R00-1 Combo Prick Punch & Center Punch38R04-1 Self Centering Center PunchAMA996 4 Piece Metal Working SetIDRK905 Deluxe 46 Piece ID Stamping & Recoining KitPPM503 4 Piece Pin Removal SetIPTS108 Impact Driver Set

Hole PunchesAVIATION RESEARCH SYSTEMS

3ATI Hole Punch from Aviation Research Sys-tems. This new and improved 3ATI hole punch works extremely well.P/N: PP325-A

GREENLEE

The Greenlee RoundHole Punches

make instrument hole cutting for 1’, 2-1/4” and 3-1/8” holes quick and easy. Here’s how it works:(1) Layout hole location, draw centerlines so that they extend beyond the hole size to be punched. (2) Drill proper size pi-lot hole in the center. (3) Put drive screw through die and pilot hole. (4) Thread on punch until both die and punch are tight against metal. (5) Line up center lines of the hole with marks on outside of the die. (6) Turn drive screw with open end or box wrench (clockwise) until hole is punched. (7) remove punch from drive screw and the metal halves will fall out. NOTE: You can use the 7646 Hydraulic Ram Kit with the round hole punches instead of turning the drive screw with a wrench.P/N: Description:

730BB-1 1” Round hole punch730BB1-1/4 1-1/4” Round hole punch730BB1-3/8 1-3/8” Round hole punch730BB-2 2” Round hole punch730BB2-1/4 2-1/4” Round hole punch730TBB 3-1/8” Round hole punch7646 Hydraulic ram kit

Ball Bearing

Drive Nut

Die

Punch

Drive Screw

ADD-A-NUT ToolAdd-A-Nut makes installing Riv Nuts and Nut Serts an easy task. The HP-2 kit comes com-plete with all the necessary items needed to install Riv Nuts and Nut Serts sizes 6-32, 8-32 and 10-32 in a high impact plastic storage case. Replacement part for the HP-2 are available.ENTERPRISE MANUFACTURING

P/N: Descrip-tion:HP-2 Add-A-Nut KitHP-21A HandleHP-22 Collect Case HP-23 6-32 Puller HP-24 8-32 PullerHP-25 10-32 Puller HP-26 4-40 Puller HP-30A 4-40 Nose Piece HP-30B 6-32 Nose PieceHP-30C 8-32 Nose Piece HP-30D 10-32 Nose PieceHP-31A Torsion SpringHP-32 Spring Retaining Pin HP-45 Body GripHP-46 Handle Grip HP-48 Nose Piece WrenchHP-50 Storage Case FP-1 Fulcrum Assembly

Stepper Drill Bit

GREENLEE

3/16

1/4

5/16

3/8

7/16

1/2

9/16

5/8

11/16

3/4

13/16

7/8

The “KWIK STEPPER” Drill Bit

Drills (12) holes sizes from 3/16” through 7/8” in increments of 1/16”• Unique tip design penetrates metal faster• Double flute con-struction takes less pressure .... it does the work for you.• Ruggedly built for maximum durabil-ity & long life• Manufactured in the USA• Minimum Chuck Size: 3/8”P/N: 34403

Vises

Vise CombinationsPanaVise vises and work holding tools have hundreds of uses limited only by your imagina-tion! The patented “split ball” allows the head to “tilt, turn and rotate” and position your work any-where you want it. Our vises and work holding tools are “guaranteed” to make any project more productive. PanaVise: “better than a third hand!”

PVJr. TheAMAZING Mini-Vise

Perfect for arts and crafts, model making, electronics and other small projects!• The easy-to-use single knob controls head movement through threeplanes: 210° tilt, 360° turn & 360° rotation.• Fine/coarse adjusting knob controls jaw pressure for deli-cate work.• Grooved jaws are ex-cellent for holding small objects and are made of reinforced thermal composite alloy [continuous heat tolerance to 350°F (177°C), intermittent heat up to 450°F (204°C)].

TOOLs

14


Fax: 1-800-828-0623

http://www.edmo.com

• Jaws are 2” (50.8 mm) tall, 1” (25.4 mm) wide, and open to 2.875” (73 mm). Neoprene jaw pads are available for holding extremely delicate items.• Base features 4.3125” (109.5 mm) bolt circle countersunk for three 0.25” (6.3 mm) flathead screws (not included); compatible with all PanaVise Base Mounts• Overall height: 6.75” (173 mm). Weight: 1.25 lbs. (0.6 kg).tent heat to 300°F (149°C)]. Inter-changeable jaws available.• Base features 4.3125” (109.5 mm) bolt circle counter sunk for three 0.25” (6.3 mm) flathead screws (not included).• Overall height: 6.25” (171.4 mm). Weight: 2.7 lbs. (1.2 kg).P/N: MODEL201

Standard PanaViseThe ORIGINAL work holding tool for hobbies, electronics, small home repairs and work bench environments!• The easy-to-use single knob controls head movement through three planes: 90° tilt, 360° turn & 360° rotation.• Jaws are 2.5” (63.5 mm) wide, 0.5” (12.6 mm) tall and open to 2.25” (57.1 mm).• Nylon jaws offer excellent electrical insulation and gentle holding power [continuous heat toler-ance up to 200°F (93°C), intermittent heat to 300°F (149°C)]. Interchangeable jaws available.

• Base features 4.3125” (109.5 mm) bolt circle counter sunk for three 0.25” (6.3 mm) flathead screws (not included).• Overall height: 6.25” (171.4 mm). Weight: 2.7 lbs. (1.2 kg).P/N: MODEL301

All PanaVise 300 series vises have interchange-able components. You can easily add a Base Mount or another Head. All PanaVise vises and work holding tools are covered by our “lifetime warranty” and will make your work space more efficient and productive.

Vacuum Base PanaVise

The world’s most PORTABLE work holding tool for hobbies, electron-ics and small home repairs!• Our Vacuum Base PanaVise is in wide use for portable ap-plications.

Simply flip the lever to “activate” the rubber base and attach the unit to any smooth, non-porous surface.• Single knob controls head movement through three planes: 90° tilt, 360° turn & 360° rotation.• Jaws are 2.5” (63.5 mm) wide, 0.5” (12.6 mm) tall and open to 2.25” (57.1 mm).

• Nylon jaws offer excellent electrical insulation and gentle holding power [continuous heat tolerance up to 200°F (93°C), intermittent heat to 300°F (149°C)]. Interchangeable jaws available.• Pad footprint measures 5.125” (130.2 mm) by 4.25” (108 mm).• Overall height: 6.125” (155.6 mm). Weight: 2.8 lbs. (1.3 kg).P/N: MODEL381

Wide OpeningHead PanaVise

The work holding tool with EX-PANDED capa-bilities, perfect for holding larger objects!• The versatility of the PanaVise product line is evident in the Model 396. This combination provides a wide gripping head with the full “tilt, turn and rotate” capabilities of the “split ball”• Jaws open a generous 6” (152.4 mm).• Ribbed, neoprene jaw pads are 2” (50.8 mm) high and 1.875” (47.6 mm) wide and provide a sure grip to hold and insulate PC boards and other larger objects; reverse the pads and the wide “V” holds delicate cylindrical objects.• Single knob controls head movement through three planes: 90° tilt, 360° turn & 360° rotation.• Base features 4.3125” (109.5 mm) bolt circle countersunk for three 0.25” (6.3 mm) flathead screws (not included).• Overall height: 7.3125” (185.7 mm). Weight: 3 lbs. (1.4 kg).P/N: MODEL396

We’ve selected some of our more specialized Heads, Bases and Base Mounts to create two unique vise combinations. These specialty tools come with a “lifetime warranty” and are compatible with all 300 series interchangeable components.

Micrometer StandHold your micrometer exactly where YOU want it with our state-of-the-art Micrometer Stand!• Micrometer holder gently, yet firmly, holds microm-eters of most sizes.• Makes Quality Control work simple: set your micrometer, tighten the holder to hold it firmly,

then position it where you want it.• Neoprene pads open 0.5” (12.7 mm) and close to 0” for holding thin items.• Single knob controls head movement through three planes: 90° tilt, 360° turn & 360° rotation.• Low-profile base keeps micrometer close to the work surface and out of the way.• Base features 4.3125” (109.5 mm) bolt circle countersunk for three 0.25” (6.3 mm) flathead screws (not included).• For attaching the mount to machinery, we rec-ommend the 335 Magnetic Base Mount.• Overall height: 4.3” (109.2 mm). Weight: 1.6 lbs. (0.7 kg).P/N: MODEL391

Multi-PurposeWork Center

The MULTI-PURPOSE work hold-ing tool that holds larger, heavier objects. It’s perfect for your home or hobby needs!• Self-centering, extra-wide opening jaws open a full 9” (228.6 mm) and hold heavier objects by centering weight over base.• Parts Tray Base Mount adds stability [8.5” (215.9 mm) diameter] and has six individual trays to neatly hold small parts and tools. In-cludes six non-marring, anti-skid pads.• Ribbed, neoprene jaw pads are 2” (50.8 mm) high and 1.875” (47.6 mm) wide and provide a sure grip; reverse the pads and the wide “V” holds cylindrical objects.• Single knob controls head movement through three planes: 90° tilt, 360° turn & 360° rotation.• “Double action” jaws open and close quickly.• Jaws can be reversed to provide 0” closure.• Overall height: 7.875” (200 mm).• Weight: 5 lbs. (2.3 kg).P/N: MODEL350

TOOLs

14



Unique Component SystemCreate a custom work holding tool for your specific needs with the PanaVise system of inter-changeable Heads, Bases and Base Mounts. All PanaVise Bases include the patented “split ball” which allows a Head to be positioned through three planes (“90º tilt, 360º turn & 360º rotation”). All 300 series Bases accept all 300 series Heads. A variety of Base Mounts adds dozens of useful options.

Vise Accessories

Circuit BoardHolder

Model 315

Fixturing HeadModel 337

Low-Profile BaseModel 305

WeightedBase MountModel 308

Jaw PadsModels 204

& 346

Vise JawsModels 343, 344,352, 353 & 354

Wire ManagerModel 358

Soldering KitModel 371

Surface PlateBase MountModel 310

Parts TrayBase MountModel 312

MagneticBase MountModel 335

Standard BaseModel 300

Vacuum BaseModel 380

WideOpening Head

Model 366

Extra-WideOpening Head

Model 376

Micrometer Holder

Model 385

Bench ClampBase MountModel 311

Base Mounts

Heads

Standard HeadModel 303

PVJr. HeadModel 203

Low-Profile HeadModel 304

Bases

Second Hand HolderSix ball joints permit movement to the exact angle required for hands-free operation. Tightened (locked in place) by thumb screw. Alligator clips, adjustable to any position, hold small shapes securely. Heavy base prevents tipping. GC ELECTRONICSP/N: 12-051

Surgical Clamp

Seizer® MedicalType Clamp

Acts as a heat sink and retrieves small parts from hard to reach places. Precision machined from perfectly tempered stainless steel.Serrated jaws, three position snap lock.P/N: 42H

Knife Set

XCELITE Light & Medium Duty Knife SetPrecision cutting made easy with these hobby-type knives. The package contains two handles and 10 blades.P/N: XNS-100

Static MatESD (Electrostatic Discharge) is nothing new to the avionics industry. Occasionally, we can feel static electricity. Did you know the static discharge “Zap” you feel when touching a door knob or another person is typically a minimum of 3000 volts. Electronic components can be dam-aged by an electrostatic discharge of less then 10 volts. Many failures caused by ESD are not immediately evident. Sometimes the compo-nents are weakened and will fail later.

The Static Mat Kit is ideal for soldering assem-bly areas providing superior resistance to heat, abrasion and chemicals and are easy to clean and maintain. CONTACT EAST• 1 each 24” x 36” light blue static mat• 1 each common ground cord• 1 each snap kit

P/N: Desc:66040 Static Mat09070 Band & 6’ coil for Static matSold Separately:• 1 each elastic adjustable wristband• 1 each six foot coil cord for wristband

TOOLs

14


Fax: 1-800-828-0623

http://www.edmo.com

Safety Wire Twister

Milbar Safety Wire TwisterP/N: Description:25W 6” Reversible auto-return26W 9” Reversible auto-return11WS 6” Diagonal nose auto-return1W393 9” Diagonal nose auto-return11W 6” Diagonal nose manual return1W 9” Diagonal nose manual return

RIGHT

LEFT

LEFT

New Improved Lock Slide

Patented

Quick-actingReversingSleeve

Spring - returnTwist Rod

Clutch - action Pull Knob(no need to release your grip)

P/N: 11W

P/N: 1W393

P/N: 1W393

Safety Wire PliersThis particular tool is designed to effectively prevent nuts and bolts from getting unfastened. Due to the automatic twisting action while oper-ating it absolutely doesn’t damage the surface of metal wire.

P/N: Description:WWP109 Safety Wire Pliers, 9”WWP109A Safety Wire Pliers, 6”

Safety Wire

National-StandardP/N: Description:SAFEWIRE20 1LB CAN .020DIA TYPE 302/304

SAFEWIRE32 1 lb can-.032 Diameter-type 302/304SAFEWIRE41 1 lb can-.041 Diameter-type 302/304 NATIONAL STANDARD

Copper BreakawayWire

Malin CompanyP/N: Description:ASTM-016 1 Pound roll

of B3 Copper Breakaway Wire 0.0159 Guage

ASTM-0126 1 Pound roll of B3 Copper Breakaway Wire 0.0126 Guage

Snap Ring Tools

The SRT-1 is a snap-ring removal tool. The SRT-1 is 16 inches long and was designed to remove those hard to get at snap rings located in the back of avionics trays. No more skinning your knuckles when removing snap rings from avionics trays.

The SRT-2 is a snap ring insertion tool. The SRT-2 is 16 inches long and was designed to install those hard to get at snap rings located in the back of avionics trays. No more skinning your knuckles when installing snap rings in avi-onics trays. TERRY HUGUENIN COMPANY

P/N: Description:SRT-1 Snap Ring Removal ToolSRT-2 Snap Ring Insertion Tool

Spark Plug Tools

The FORBES Plug-A-Longdoes just what it’s name implies... it allows you to take aircraft plugs that you have removed along with you, without getting them mixed up or out of order. In fact, each hole is labeled to in-sure that each plug goes back in the exact place it came out of. Sturdy steel construction.

Holds 12 spark plugs each hole stamped with cylinder number also marked top and bottom so each plug can be identified easily, no mix-ups. Plugs can be serviced and returned back to where they were removed from. A must for aircraft mechanics. Made from 18 gauge steel. Blue powder coat finish.Dimensions: W=4.0” , L= 8.0” , H= 2.5 P/N: FMSC-12

Plug Gap

is a high quality tool that will probably last a lifetime. Simply insert an aircraft plug, then turn the screws to adjust gap prior to initial insertion. It’s simplicity is it’s greatest as-set. Made from black steel.P/N: FMSC-11

STEINEL Heat Guns

Variable Tem-perature Electronic Heat GunPowerful heat gun with vari-able temperature and electronic thermocouple control for flexible use and maximum reliability. STEINEL’s exclusive DuraTherm™ heating ele-ment ensures long life and even heat. Temperature: Continuously variable 120°F – 1100°F Airflow: 3.6 / 10.6 / 17.6 CFMSwitch: 1) 120°F / 3.6 CFM2) Var Temp/10.6 CFM2) Var Temp/17.6 CFMOutput: 1500 wattsVoltage: 120 VAC / 60 HzWeight: 30 ozWarranty: Full One YearP/N: HL1910E

75 mm (3”) Re-flector NozzleP/N: 07301

3” Window Nozzle

P/N: 07041

3” Surface Nozzle

P/N: 07021

39 mm (1-1/4”) Reflector Nozzle

P/N: 07051

2” Window Nozzle

P/N: 07031

2” Surface Nozzle

P/N: 07011

40 mm (1-1/2”)Split NozzleP/N: 07471

14 mm (5/8”)Reflector Nozzle

P/N: 07461

3/8” Reduction Nozzle

P/N: 07062

5/8” Reduction Nozzle

P/N: 07071

3/4” REDUCTION NOZZLE

P/N: 07081

20mm (3/4”)Slit Nozzle

P/N: 07101

Plastic Welding Rod Nozzle

P/N: 07091

75 mm (3”)Heat Disc

P/N: 07211

TOOLs

14



IntelliTemp™ Heat Gun with LCD Temperature

Display

Microprocessor con-trolled heat gun with LCD display enabling tem-perature selection in 10°F increments. STEINEL’s exclu-sive DuraTherm™ heating element ensures long life and even heat.Temperature: Continuously variable 120-1150°F Airflow: 3.6 / 10.6 / 17.6 CFMSwitch: 1) Cool Air (120°F / 3.6 CFM)2) Var Temp/10.6 CFM3) Var Temp/17.6 CFMOutput: 1500 wattsVoltage: 120 VAC / 60 HzWeight: 30 ozWarranty: Full One YearP/N: HL2010E

MULTI PURPOSE KITWith HL2010E

IntelliTemp™ Heat Gun Kit with LCD Tempera-ture Display Microprocessor controlled heat gun with LCD display enabling temperature selection in 10°F increments. STEINEL’s exclusive Dura-Therm™ heating element ensures long life and even heat.

KIT INCLUDES:• HL2010E Heat Gun;• Heavy Duty Case,• Applications Guide Book,• Overhead Security Hanger.• 9mm Reducer Welding Tip,• 9mm, 14mm & 39mm Reflector• Welding Rod Assortment: ABS, PP, PVC, LDP/N: 34856

Multi-Purpose Kit withHL 1910 E Heat Gun

Includes accessories for a wide variety of ap-plications.• Choice of Electronic Heat Gun• Heavy Duty Case• Applications Guide Book• 9mm Reducer• Welding Tip• 9mm Reflector• 14mm Reflector• 39mm Reflector• Welding Rod Assortment: ABS, PP, PVC, LDPE, HDPE• Overhead Security HangerP/N: 34836

HG 2310 LCDProgrammable

IntelliTemp™ HeatGun with LCD Display

Programmable heat gun with LOC Lockable Override Control™ of tempera-ture and airflow output settings. LCD display enables temperature selec-tion in 10°F increments.Temperature: Continuously variable 120-1200°F Airflow: 3.6 - 17.6 CFMSwitch:1) Cool Air Stage (120°F / 3.6 CFM)2) Variable Temp & AirflowPrograms: Four customizable pre-set tempera-ture/airflow programsOutput: 1600 wattsVoltage: 120 VAC / 60 HzWeight: 33 ozWarranty: Full One YearP/N: 34870

WELLER IndustrialHeat Gun

High qual-ity indus-trial heat gun. 120V, 2.2 amps 3-wire grounded plug and 6’ cord. 750° to 800°. For Solder Sleeves and Heat Shrink.

P/N: Description:6966C Heat Gun

(Includes the following nozzleaccessories)6956 .05 reflector6957 1.50 reflector6958 Reducing baffle6964 Precision reflector6965A Heat gun holder (not included w/6966C)

Dual Range Heat Gun

A dual range heat gun for use in heating shrink tube and drying coatings, adhesives, etc. Low temperature range setting produces a nominal 700 F (2,000 BTU’s), high range 975 F (4,000 BTU’s). Maximum setting draws 10 Amps, low heat draws 5 Amps. Lightweight design that is easy to handle. Designed so that it may be put down to cool without a special holder. GC ELECTRONICSP/N: 12-997

KIT CONTAINS: Heat Gun, Reduction Nozzle, Deflection Nozzle & Window Nozzle.

High Temp Heat Gun

This is a dual, high-temper-ature heat gun, 790° and 1200°, suitable for solder sleeves & Heat Shrink. The hottest gun we carry.

P/N: Description:1095 Heat Gun1080 Reducer for concentrating heat.1082 Reflector for heat shrink/solder sleeves

Micro-Therm Flameless Heat Gun

Features:• Electronic ignition system• Powered by disposable gas lighter• Flameless temperature up to 650º C (1300º F)• Windproof and waterproof ignition• Compact size• Less than 5” tall & 1” thick!• Includes refillable fuel cell & heat deflectorP/N: MJ-600

TOOLs

14


Fax: 1-800-828-0623

http://www.edmo.com

Soldering Stations

Weller ControlledOutput Soldering Station

• Transformer powered soldering station complete with lightweight, low voltage, temp. controlled soldering iron.• Special “closed loop” method of controlling maximum tip temperature... to protect tempera-ture sensitive components.• Power unit housing features impact resistant plastic for durability.• Quick disconnect plug for soldering iron and lighted on/off switch.• Station housing and iron are grounded with separate conductor that terminates @ third pin of power cord.P/N: WTCPT

Replacement 700º tip: P/N: PTA7Replacement 800º tip: P/N: PTA8

UTC-SS Dual Wattage Professional soldering

station

features a selectable low setting of 25 watts and a high setting of 35 watts. ESD safe, three-wire grounded plug, UL listed. Large selection of 1/4” thread-on tips available.P/N: WLC-100

Replacement tips:P/N: Description:ST1 Screwdriver Tip .062ST2 Screwdriver Tip .093ST3 Screwdriver Tip .125ST4 Screwdriver Tip .187ST5 Single Flat Tip .031ST6 Screwdriver Tip .031ST7 Conical Tip .031ST8 Narrow Screwdriver Tip .062

Soldering Irons

The SL325 soldering iron is ready to use, utiliz-ing a traditional Ungar interchangeable handle, heaters and tips for custom applications and easy maintenance. The handle has a 6’ 3-wire grounded cord and features cool, “soft touch,” acid and flux resistant grip. Large selection

of 1/4” thread-on tips available. Uses same replacement tips as UTC-SS above.P/N: SL325

Replacement tips:P/N: Description:PL113 Chisel TipPL133 Long Tapered Chisel Tip

ProfessionalIndustrial Soldering Gun

• 300/200 watts• Reliable new industrial-quality tool• 300 watts in high trigger position• 200 watts in low trigger position• Features nickel-plated copper secondary, heat-resistant thermo plastic housing• Tin plated copper tip• Heavy-duty grounded cord• Selection of soldering, cutting and smoothing tips availableP/N: D650

Additional Soldering Products

Scrub-ItScrub-It comes with horsehair anti-static bristles.P/N: SD74H

FluxDispenser

Flux dispenser comes with a .023 Dia. needle.P/N: FD2D

Portable Soldering Iron

AUTOMATIC IGNITION SYSTEM SOLDERING IRON

SOLDER-IT• 30W-100W POWER RANGE• Butane Powered• Bold Ergonomic Design• Portable Multi-function• Heat ToolP/N: PRO100K

FEATURES:• Equivalent to a power range from 30 to 100 Watt.• Cordless/simple and safe operate under any conditions, anywhere.• Ready to use 15 seconds after ignition.• Tank contains fuel for 120 minutes of operation.• No electrical interference.• Comes with soldering tip and protective cap.

7800 ISO-TIP “60”Cordless Soldering Iron

The ISOTIP 7800 is the fastest recharging cordless soldering iron on the market today. Solders up to 125 electronic joints per charge. Recharges fully in one hour - or enough for reuse in a few minutes. Allows 20% continu-ous use when kept in charger between uses. Iron switches automatically to energy-saving trickle-charging rate when battery becomes full. LED indicator shows when battery is charged. Cannot overcharge. 7800 kit contains cordless soldering iron, recharging stand with wall plug transformer, #7577 5/32 chisel tip, #7545 1/16 fine tip and instructions

P/N: Description:7800 Cordless Soldering Iron

Replacement soldering tips:7535 5/32 Regular Tip7545 1/16 Fine Tip7566 1/64 Micro Tip7571 1/16 Beveled Tip7577 5/32 Chisel Tip7579 3/32 Beveled Tip7593 3/16 Beveled Tip7596 1/32 Knife Tip

7571 (1/16 Beveled Tip)



7566 (1/64 Micro Tip)

7577 (5/32 Chisel Tip)

7535 (5/32 RegularTip)

7545 (1/16 Fine Tip)

7596 (1/32 Knife Tip)

TOOLs

14



Desoldering Pumps

P/N: Description:7880 Standard WELLER desoldering pump. Heavy-Duty spring loaded vacuum. Tips are heat resistant Teflon.

7874B Static free desoldering pump, ESD-Safe.7875B Replacement tip for 7874B

Solder & Solder Wick

Kester “44” resin coresolder is designed forelectrical, electronic andaerospace applications.The two tin/lead alloyshave a high tin content (60%)and melting point is 370° F.P/N: Alloy: Dia.:603A31 60/40 .025604A31 60/40 .031

CHEMTRONICSChem-Wik Lite

has a pure copper braid which provides quicker, safer desoldering with less heat. It’s also fast - up to 50% faster than conventional braids. Contamination free, leaving no ionic residue.

P/N: Width: Length: 10-5L .100” 5ft2-5L .030” 5ft5-5L .050” 5ft7-5L .075” 5ft

CHIP QUIK PATENTED SMD REMOVAL SYSTEM

Simply by adding Chip Quik, normal solder will reflow at a safe low temperature below 150 deg. C (300 deg. F) Benefits from reduced solder reflow temperature:Eliminate:• Heat damaged pads, leads and circuitry• Heat damaged solder joints of adjacent components• Thermal blisters, burns and board delamination• Mechanical damage from chip extraction when reflow is incomplete

Further Eliminate Reworking The Rework And Save The Cost Of:• Lost time • Labor costs • Inconvenience• Lost boards from heat damage

It takes the technician 1 or 2 tries to perfect the process. Remove QFPs, PLCCs, SOICs and chip components without complex and costly equipment. A large inventory stock of heater tips and nozzles are not required.

LOW COST: Available in complete kits for field service or industrial packaging for rework de-partments. No shelf life! No investment required. Use Chip Quik with existing rework equipment or temperature controlled soldering irons.REDUCE HEAT - REDUCE DAMAGE

CHIP QUIK ProductsP/N: SMD 1CHIP QUIK SMD Removal Kit Remove with solder iron or warm air bath. SMD 1 Contents • 2.5 ft. CHIP QUIK material. Removes 8-10 SMD’S. • 1 cc syringe of CHIP QUIK no clean rework paste flux. • Alcohol pads for clean up. • Complete instructions for SMD removal and cleanup. P/N: SMD 16CHIP QUIK Industrial Pack 16 Ft. The same CHIP QUIK material in 30 convenient 6.5” lengths. Instructions included. P/N: SMD 32CHIP QUIK Industrial Pack 32 Ft. The same CHIP QUIK material in 60 convenient 6.5” lengths. Instructions included.

P/N: SMD 291CHIP QUIK No Clean Flux 10 cc syringe. The same flux used in the SMD 1. Ideal for all rework.

P/N: SMD 2000CHIP QUIK Complete Solder/Desolder rework kit.• Easy to follow complete rework instructions. • With recommended rework tools and materials, evaluated in our own labs.

SMD 2000The contents of this kit consists of the latest sol-der/desolder products available. Each individual item has been carefully selected to fill your rework needs.Contents: (In durable plastic case) • Chip Quik Removal Alloy SMD 4.5 (4.5 ft. removal alloy w/instructions) • Solder Paste - no clean 63/37 rework solder paste w/flux in 1 cc syringe w/nozzle & cap. (trial size)• Solder 3 ft. 63/37 2% silver .031 in.• Chip Quik Paste flux - no clean flux in 1 cc syringe w/nozzle & cap. Used for solder/desolder.• Liquid flux remover/cleaner - 5 cc container w/ applicator. (non flammable)• Probe kit - 4 stainless steel dental picks for SMD removal & placement.• Solder wick - no clean - 5 ft.• Handi Vac - SMD pick & place tool / w/tips• Acid brush - qty. 2.• Precision tweezers - for SMD removal & placement.• Cleaning wipers - tight weave / low lint 4”x4” qty. 6 (for cleaning PC board).• Swabs - double ended qty. 10. (for PC board clean up)• Alcohol pads - qty. 6. (for PC board clean up)• Chip Quik SMD removal & clean up instructions

STEWART R BROWNEFluorescent Worklights

Model XP87B

Fluorescent Work Light / 26 wattHazardous Location cUL Listed Class I, Div. 1, Group C&DClass II, Div. 1, Group F&G

The XP87B light, with a tough all plastic exterior and cool fluorescent lamp, makes it ideal for use in con-fined spaces and hazardous areas. The 1800 lumen light makes it the brightest light of this design.P/N: Description:XP-87B-50P with 50’ cord - 9lbs.GSFB50 12 volt with trans.- 12lbs.NSN 6230-01-385-3689

TOOLs

14


Fax: 1-800-828-0623

http://www.edmo.com

Model XP65Portable Inspection Light / 8 wattHazardous Location cUL Listed Class I, Div. 1, Group DClass II, Div. 1, Group G

The XP65 was designed primarily for the aircraft industry. The narrow diameter housing and cool 8 watt fluorescent lamp makes it ideal for inspecting aircraft fuel systems or confined spaces.• XP65 (light only) 27” long x 2.5” dia. - 3lbs.• US Patent No. 4931023• USAF/NSN 6230-00-042-5677

P/N: Description:XP-65 No cordXP-65-50P Includes 50’ cord

The Stubby II

series of fluorescent work lights are ideal for use in non-hazardous locations and where water vapor or moisture can present risks to the worker. Our exclusive vapor-proof clamps keep water vapors out of the light. These “rough service” fluores-cent lights offer extra bright light with lightweight design. Oil and water resistant SJTOW-A cords are provided in 25 and 50 foot lengths. Our model VST50 assembly offers the model 1425V light with 50’ cord and transformer to proved 12 volt power at the light for added personnel pro-tection. As an added option, the Stubby II lights can be provided with 20’ or 40’ retractable reels.

Model: Description: Lumens:1425V-16/3 13 w, 25’ cord, ballast 900 in handle,12” x 2”1450V-16/3 13 w, 50’ cord, ballast 900 in handle,12” x 2”1525V 13 w, 25’ cord, ballast 920 in line,22” x 2”1550V 13 wt, 50’ cord, ballast 920 in line,22” x 2”

PELICAN Worklights

REMOTE AREALIGHTING SYSTEM

The 9450 Remote Area Light-ing System combines our tough 1510 Carry On Case with 16 x

1 watt Luxeon LEDs mounted in an aluminum heat sink. All items are stored inside the case and as-semble in minutes. The aluminum pole extends to a height of 83” to provide 1280 lumens of light for any area. The rechargeable bat-tery has 9 hours of life at maximum output tailing off to low light level at hour 17. The diffuser (included)

can be mounted to change the beam from a focused spot to a diffused beam.

P/N: 9450

9430Remote

Area Lighting System

• Up to 15 hours of burntime• 2000 lumens of brightness• Maintenance Free LED Array with life expectancy of 50,000 hours• Fully extendable mast with 360 degree rotating head• Waterproof Rubber Activation Switch• Mast Extension LockP/N: 9430B

Portable Ground FaultCircuit Interrupters

(GFCI)

The GFCI provides protection for personnel against ground fault shock hazards developed from cut wires, faulty insulation, water or where electrical contact might be made that would provide a path to ground through the human body. The GFCI measures the current flowing out and back to a power tool or device though temporary wiring. If leakage to ground is detected in the range of 4 to 6 milliamperes, the GFCI discon-nects the power supply to protect the worker.Unit is designed for 15 amp service and 120 volts.

P/N: Description:14380QD 4 unit, 15 amp, 6’ cord

Retractable Static Grounding Reels

have long been used as a proper method of stor-ing cables. The enclosed housing prevents the cable from being exposed to corrosive and harsh elements. The self-storing design also prevents personnel from tripping over loose cable. The reels have a self-retracting drum and instant lock mechanism to prevent cable from becoming tangled. Standard designs come with 3/32” dia. galvanized cable in lengths of 20’ and 50’. Other lengths and coated cables are available upon request.

P/N: Description:R-20 Cable reel w/20’ cable w/REB clampR-50 Cable reel w/50’ cable w/REB clamp200-20R Cable reel w/20’ cable w/alligator clip700-50R Cable reel w/50’ cable w/alligator clip

Aircraft Scales

LPA400 Low-ProfileAircraft Weighing

System

The LPA400 (Low Profile Aircraft) Platform Weighing System by GEC is the Industry Stan-dard for “mid range” portable weighing devices. With an abundance of fea-tures, the LPA400 transforms any aircraft weigh-ing operation into a seamless, efficient project with predictable results. Self leveling Load cell technology benefits the user by automatically correcting for imperfect weighing surfaces. Simply put, it is not necessary to shim or level the platform before applying a load because the device is “fluid level” not electronically corrected to level.

Standing just 1.25” high, the LPA400 gives you the option of not using ramps with most aircraft applications, further simplifying your weighing operation. With a physical weight of less than 40 lbs., the LPA400 is significantly lighter and easier to handle than any competitive device. Setup and take down are quick and painless. Long life, rechargeable batteries meant that the LPA400 has no external wires or cables to tangle or trip. An uncluttered weighing creates a safer, more efficient weighing operation.

The LPA400 is fully self contained and requires no other components to function. With a capac-ity of 0-30,000 lbs., the LPA400 has the capabil-ity to accurately weigh a wide variety of aircraft. Operators with diverse fleets will benefit from having only one weighing system with which to weigh all their aircraft. The LPA400 exhibits remarkable accuracy at plus or minus +/-0.1% of applied load.

P/N: Description4301150 LPA400-5 Low Profile Aircraft

Platform Weighing System - 5-Pad/30K lbs.

4301160 LPA400-3 Low Profile Aircraft Platform Weighing System - 3-Pad/30K lbs.

TOOLs

14



HARDIGG Shipping Cases

HARDIGG RACKMOUNT SHIPPING CASES

First-Class Accommodations For Delicate Electronic GearHardigg Cases engineers and manufactures rugged, rotationally molded plastic cases for commer-cial, industrial, and military shipping. The rotomolding process offers impact resistant protection, strength, and watertight packaging.

What makes us different? Hardigg’s patented anti-shear lid to base interlock and molded in hard-ware. Hardigg offers 350+ standard sizes of cases, the largest in the world, and the most complete line of rotomolded 19” double entry containers with shock mounted EIA racks for mobile electronic equipment. Thousands of Hardigg’s shipping containers are in use worldwide. From computers to weapons cases, Hardigg has a case to suit your needs.

Hardigg Cases also offers Skid-Mate pallet cushions, customized rotational molding, and custom foam fabrication. Hardigg Cases engineers and manufactures rugged, rotationally molded plastic cases for commercial, industrial, and military shipping. The rotomolding process offers impact resis-tant protection, strength, and watertight packaging.

Shipping sensitive electronic equipment demands more than just ordinary protection. Hardigg Rackmount Cases provide the finest off-the-shelf insurance available for delicate payloads. Supe-rior engineering experience applied to the critical areas of case design ensures the survival of your equipment and the reusability of the case. Protective features built into each rackmount case are unsurpassed in the industry.• Precision-engineered 2” long shockmounts, individually fine-tuned to match the weight range of your payload.• An extra-rugged roto-molded exterior shell that withstands all kinds of abuse, drop after drop- damage-free.• A “Versa-Rack” 19” EIA internal frame that provides a wide range of custom mounting options to match your requirements.• Two inches of sway space enveloping the internal frame to ensure continuous cooling air flow and low shock and vibration levels for operating equipment.

1) SUPER TIGHT SEAL: Gasketed, tongue-in-groove parting line integrally molded of resilient polyethylene absorbs severe impact without permanent deformation. This Hardigg innovation is far superior to metal parting lines which may dent on impact, exposing contents to potentially harmful moisture and dust.

2) EXTRA THICK IMPACT ZONES: All corners and edges - where impact occurs most often - are molded up to 20% thicker than flat surfaces. Sturdy polyethylene bodies are seam free with no metal valances or joints to bend and leak.

3) POSITIVE “LATCH TOGETHER” STACKING: Interlocking ribs allow for convenient, secure stacking - top to bottom, and fronts align regardless of container depth. Optional coupling catches lock stacked enclosures together for extra tip over security when pulling out rack equipment.

4) PATENTED “LID LOCK” BASE TO LID INTERLOCK: Molded-in anti-shear locks keep lid closure sealed on impact. A resilient polyethylene shell absorbs drop impact and minimizes shear force on the closure hardware.

5) ELASTOMERIC SHOCK MOUNTS: Elastomeric shock mounts are uniquely engineered to match the weight range of your equipment. Two inches of sway space insulate your cargo from shock and vibration and assure cooling air flow - a major advantage over foam-captivated systems.

ULP410 UltraLow-Profile Aircraft Weighing System

The ULP410 is de-signed specifically for general aviation, the ULP410 is a user friendly scale, each scale accurately weighs up to 10,000 lbs.

Only 1.5” in height, weighs less than 30 lbs. Self contained and independent, no cables. Coupled with remarkable repeat-ability, with an accuracy within +/- 0.1% of the applied load. GEC’s patented technology automatically corrects for “off level” weighing surfaces. The ULP410 platforms are more accurate, maintain calibration, and require less maintenance than shear-beam designed systems.

The ULP410 can accurately weigh aircraft ranging from Cessna 140 to a King Air or Cita-tion, and with additional platforms, Gulfstreams and Challengers. The long-life re-chargeable batteries make the ULP410 truly portable. The stable, self contained LCD readout makes the ULP410 a user-friendly weighing system.

P/N: Description4301952 ULP410 Scale/Single Pad/10K lbs.

Brainweigh 200Top-of-Jack Aircraft

Weighing System

The Brainweigh 2000 Digital Load Cell Top of Jack System is versatile yet simple to use giving you unpar-alleled confi-dence in your aircraft weighing program.

With more than 50 years of experience in the design, manufacture, and successful deployment of weighing equipment worldwide, GEC has developed one of the most advanced, most accurate, and most repeatable load cell systems available for aviation.

The Brainweigh uses digital signal transmission which is 250 times stronger than analog an eliminates interference from outside sources. Analog-to-digital conversions as well as calibra-tions are done at each individual load cell. Additional larger or smaller capacity load cells can be added without an additional instrument or cables. Simply connect the new load cells to the existing cables and operate the system.

P/N: Description4301164 BW2000/10K lbs./3 Load Cells4301166 BW2000/25K lbs./3 Load Cells4301948 BW2000/50K lbs./3 Load Cells4301169 BW2000/10K lbs./4 Load Cells4301949 BW2000/25K lbs./4 Load Cells

TOOLs

14


Fax: 1-800-828-0623

http://www.edmo.com

6) LIGHTWEIGHT VERSA-RACKS: (EIA Standard) High-strength, lightweight heat-treated alu-minum 19” Versa-Racks support and protect equipment from severe drops, aircraft turbulence, off-road travel, etc.

7) RECESSED HARDWARE: Handles and catches are recessed into the exterior shell to prevent damage during shipment. All catch attachments feature molded-in metal inserts for additional strength and watertightness.

Lid Hanger:Stores lid on side of case when case is open

Pressure Relief Valve:Available on all Hardigg cases. Includes all gasket-ing required to safely main-tain controlled pressure differential.

Keyboard Tray:Attaches to front of case.24” x 12”, folds flat for storage

Blank Bezel Plate:16-gauge aluminum. Flanged for strength. Available in 1U, 2U, 3U and 4-Unit heights.(1U=1.75”)

Enclosed StorageDrawer with Slides and keylock:Drawers are 14” deep (front and back) and available in 2U, 3U and 4-Unit heights.(1U=1.75”)

Rack Slides:Mil-spec, compact, solid bearing slides. Equipment drawers or shelves can be mounted directly to slides.

Stainless Steel Hardware:Catches, strikes, handles, lift rings all available in stainless steel.

Lifting Rings:Bolt-mounted with backup plates for hoisting or tie-down of case. Rated 500 lbs. pull strength per ring.

Coupling Catches:Positive locking system for vertical stacking of rackmount enclosures.

Heavy-duty Fixed & Removable Casters:Removable or fixed, recessed caster holder de-sign. Triple ball bearing action. Mounted on load-spreading base system for maximum container weight support. Two wheel sizes. (2.5” or 3.5”)

Shipping Card Holder:Metal frame riveted to case in prominent loca-tion. Two sizes (3”x5” or 4”x6”)

Storage Pouch:Zippered pouch for storing cables and accessories in front or rear lids.

Hardigg Single Lid CasesWhether you need custom foam or versatile deck version to transport multiple items for your repair facility Hardigg builds a box that fits. Call EDMO’s toll-free number to find a solution for your case needs.

GYRO CASE

FOOT LOCKER

DECK

WATERJET CUSTOM

FOAM

MONITOR CASE

TOOLs

14



RCTS DE BOXThe RCTS DE box was designed with Life Sup-port Shops around the world. The lower drawer holds all of your cables and printer. The folding keyboard tray gives you a work surface when you are deployed. The integrated lid hangers hold the lids on the sides, out of the way. Your unit is cradled in a shock resistant, watertight and dustproof container. To deploy or redeploy takes mere seconds, partially disconnect and put the lids on and you are ready to go!

This box opens on both ends! CALL FOR DETAILS!

Hardigg Shipping Case Accessories

The Hardigg 19” Versa-Rack internal frame may be customized by adding either vertical and/or horizontal bracing. Hardigg specializes in many other custom applications for 19” Rackmount Cases. The standard case color is grey. Op-tional colors are olive drab, dark blue, purple, forest green, tan, yellow, white, orange, maroon, black, red and light blue. Please call EDMO for more information on the wide range of accesso-ries for Hardigg Cases.

Pelican ShippingCase Accessories

Small

GUARD BOX Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof. These are some of the features of this Pelican Protec-tor Case™ that offers total protection for your equipment.

It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. Its exclusive 1/4” (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an automatic purge valve for quick equalization

after changes in atmospheric pressure. Your equipment can fit into the high density foam of the case for total subjection and protection against impact, vibration or shock. A nameplate (included) can be personalized (engraved at additional cost). This case is NATO codified and tested to MIL C-4150J (Military Standard), IP-67 (Ingress Protection) and ATA (Air Transportation Association). Unconditionally Guaranteed ... forever.P/N: 1120

TEMPERATURE RATING MINIMUM: -10° F (-23° C) MAXIMUM: +210° F (+99° C) DIMENSIONS INSIDE: 7-3/8” x 4-7/8” x 3-1/16” (18,7 cm x 12,4 cm x 7,7 cm) OUTSIDE: 8-1/4” x 6-9/16” x 3-9/16” (20,9 cm x 16,6 cm x 9 cm) LID DEPTH: 1/2” (1,3 cm) CASE DEPTH: 2-9/16” (6,5 cm) BUOYANCY: Floats in salt water with 7 lbs (3,2 kg) load COLORS: Black, Yellow and Orange (w/ Foam) Black (w/o Foam) ACCESSORIES: P/N:1121 - Replacement Foam (3 Pieces) P/N: 1123 - Replacement O Ring Special Application Panel Frame also available APPROVALS:• P 67 • ATA Specification 300 • Military Standard C-4150J

1300 CASE Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof.

These are some of the features of this Pelican™ Pro-tector Case™ that offers total; protection for your equip-ment. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. Its exclusive 1/4” (6.4 mm) neoprene o-ring and ABS latches seal per-fectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. Your equipment can fit into the high density foam of the case for total subjection and protection against impact, vibration or shock. A nameplate (included) can be personalized (engraved at additional cost). This case is NATO codified and tested to MIL C-4150J (Military Standard), IP-67 (Ingress Protection) and ATA (Air Transportation Association). Unconditionally Guaranteed ... forever.P/N: 1300

MINIMUM: -10º F (-23º C) MAXIMUM: +210º F (+99º C) DIMENSIONS INSIDE: 9-3/8” x 7-1/4” x 6-1/8” (23,8cm x 18,4 cm x 15,5 cm) OUTSIDE: 10-5/8” x 9-11/16” x 6-7/8” (27 cm x 24,6 cm x 17,4 cm) LID DEPTH: 1-3/16”(3 cm)

CASE DEPTH: 4-15/16”(12,5 cm) BUOYANCY: Floats in salt water with 11.90 lbs (5,4 kg) load COLORS: Black, Silver and Orange (w/ Foam) Black (w/o Foam) Yellow ACCESSORIES: P/N: 1301 - Replacement Foam Set (4 Pieces) P/N: 1303 - Replacement O Ring Special Application Panel Frame also available APPROVALS :• IP 67 • ATA Specification 300 • Military Standard C-4150J1400 CASE Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof.

These are some of the features of this Pelican™ Pro-tector Case™ that offers total; protec-tion for your equipment. It is made of Ultra High Impact structural copoly-mer that makes it extremely strong and durable. Its exclusive 1/4” (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. Your equipment can fit into the high density foam of the case for total subjection and protection against impact, vibration or shock. A nameplate (included) can be personalized (engraved at additional cost). This case is NATO codified and tested to MIL C-4150J (Military Standard), IP-67 (Ingress Protection) and ATA (Air Transportation Associa-tion). Unconditionally Guaranteed ... forever.P/N: 1400

MINIMUM: -10° F (-23° C) MAXIMUM: +210° F (+99° C) DIMENSIONS INSIDE: 12”x 9-1/16” x 5-3/16” (30,5 cm x 23 cm x 13,1 cm) OUTSIDE: 13-3/8” x 11-5/8” x 6” (34 cm x 29,5 cm x 15,2 cm) LID DEPTH: 1-3/16” (3 cm) CASE DEPTH: 4” (10,2 cm) BUOYANCY: Floats in salt water with 20 lbs (9,1 kg) load COLORS: Black, Silver and Orange (w/ Foam) Black (w/o Foam) Yellow ACCESSORIES:P/N:1401 - Replacement Foam Set (3 Pieces) P/N:1403 - Replacement O Ring Special Application Panel Frame also available APPROVALS: • IP 67 • ATA Specification 300 • Military Standard C-4150J

TOOLs

14


Fax: 1-800-828-0623

http://www.edmo.com

1420 MARINE CASE

The Marine Case, #1420 has been designed to protect valuable equipment when going on a boat, canoe, kayak, sailboat, yacht, rescue boat, coast guard ship, fishing boat, or any kind of boat made of aluminum or fiberglass.

It is designed to attach easily onto any kind of boat and it has a system so that the case clamps securely on the edge, even with turbulences. Therefore with the Marine Case you can protect and keep safely dry photographic cameras, video cam-eras, binoculars, purses, mobile phones, glasses, compass, and all sort equipment needed when going for a sail. Unconditionally Guaranteed... forever.P/N: 1420

TEMPERATURE RATING MINIMUM: -10° F (-23° C) MAXIMUM: +210° F (+99° C) DIMENSIONS INSIDE 13” x 5” x 10” (33 cm x 12,7 cm x 25,4 cm) OUTSIDE 15” x 8-1/2” x 10-1/2” (38,10 cm x 21,6 cm x 26,6 cm) LID DEPTH: 1” (2,54 cm) CASE DEPTH: 9” (22,8 cm) BUOYANCY: Floats in salt water with 20 lbs (9,07 kg) load COLORS: Black ACCESS: P/N: 1203 - Replacement “O” Ring

Medium

1450 CASE Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof. These are some of the features of this Pelican™ Protector Case™ that offers total; protection for your equipment.

It is made of Ultra High Impact struc-tural copolymer that makes it extremely strong and durable. Its exclusive 1/4” (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an auto-matic purge valve for quick equalization after changes in atmospheric pressure. Your equipment can fit into the high density foam or padded dividers for total subjec-tion and protection against impact, vibration or shock. A nameplate (included) can be personal-ized (engraved at additional cost). This case

is NATO codified and tested to MIL C-4150J (Military Standard), IP-67 (Ingress Protection) and ATA (Air Transportation Association). Un-conditionally Guaranteed ... forever.P/N: 1450

MINIMUM: -10º F (-23º C) MAXIMUM: +210º F (+99º C) DIMENSIONS INSIDE: 14-13/16” x 10-3/8” x 6” (37,6 cm x 26,3 cm x 15,2 cm) OUTSIDE: 16” x 13” x 6-7/8” (40,6 cm x 33 cm x 17,4 cm) LID DEPTH:1.75” (4,4 cm) CASE DEPTH: 4.25” (10,8 cm) BUOYANCY: Floats in salt water with 24.91 lbs (11,3 kg) load COLORS: Black, Silver and Orange (w/ Foam) Black (w/o Foam) Yellow ACCESSORIES: P/N: Description:1451 Replacement Foam Set (3 Pieces) 1453 Replacement O Ring 1455 Padded Divider Set Special Application Panel Frame also available APPROVALS: • IP 67 • ATA Specification 300 • Military Standard C-4150J


It is made of Ultra High Impact structural copoly-mer that makes it extremely strong and durable. Its exclusive 1/4” (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an au-tomatic purge valve for quick equalization after changes in atmospheric pressure. Your equip-ment can fit into the high density foam or pad-ded dividers for total subjection and protection against impact, vibration or shock. A nameplate (included) can be personalized (engraved at additional cost).

This case is NATO codified and tested to MIL C-4150J (Military Standard), IP-67 (Ingress Pro-tection) and ATA (Air Transporta-tion Association). Unconditionally Guaranteed ... forever.P/N: 1500

MINIMUM: -10° F (-23° C) MAXIMUM: +210° F (+99° C) DIMENSIONS INSIDE: 17” x 11-7/16” x 6-1/8” (43,2 cm x 29 cm x 15,5 cm) OUTSIDE: 18-1/2” x 14-1/16” x 6-15/16” (47 cm x 35,7 cm x 17,6 cm) LID DEPTH: 1-13/16” (4,6 cm) CASE DEPTH: 4-5/16” (11 cm) BUOYANCY: Floats in salt water with 39.9 lbs (18,1 kg) load COLORS: Black, Silver and Orange (w/ Foam)

Black (w/o Foam) Yellow ACCESSORIES: P/N: Description:1501 Replacement Foam Set (3 Pieces) 1503 Replacement O Ring 1505 Padded Divider Set Special Application Panel Frame also available APPROVALS: • IP 67 • ATA Specification 300 • Military Standard C-4150J

Large


It is made of Ultra High Impact structur-al copolymer that makes it strong and durable. Its exclusive 1/4” (6.4 mm) neoprene o-ring and ABS latches seal per-fectly and includes an automatic purge valve for quick equalization after changes in at-mospheric pressure. It is equipped with 2” (5 cm) hard rub-ber transport wheels, a retractable extension handle and multiple fold down carrying handles. Your equipment can fit into the high density foam or padded dividers for total subjection and protection against impact, vibration or shock. A nameplate (included) can be personalized (en-graved at additional cost). This case is tested to MIL C-4150J (Military Standard), IP-67 (Ingress Protection) and ATA (Air Transportation Associa-tion). Unconditionally Guaranteed ... forever.P/N: 1610

MINIMUM: -10° F (-23° C) MAXIMUM: +210° F (+99° C) DIMENSIONS INSIDE: 22-3/16” x 17-1/8” x 10-9/16” (56,3 cm x 43,5 cm x 26,9 cm) OUTSIDE: 24-9/16” x 19-5/16” x 11-15/16” (62,4 cm x 49 cm x 30,3 cm) LID DEPTH: 5-1/16” (5,2 cm) CASE DEPTH: 8.5” (21,6 cm) BUOYANCY: Floats in salt water with 99.2 lbs (45 kg) load COLORS: Black ACCESSORIES: P/N: Description:1611 Replacement Foam Set (5 Pieces) 1613 Replacement O Ring 1615 Padded Divider Set 1609 Photo/Lid Organizer 1507 Peli Quick Mounts APPROVALS: • IP 67 • ATA Specification 300 • Military Standard C-4150J

TOOLs

14




It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. Its exclusive 1/4” (6.4 mm) neo-prene o-ring and ABS latches seal perfectly and includes an auto-matic purge valve for quick equaliza-tion after changes in atmospheric pressure. Your equipment can fit into the high density foam or padded dividers for total subjection and protection against impact, vibration or shock. A nameplate (included) can be personalized (engraved at additional cost). This case is NATO codified and tested to MIL C-4150J (Military Standard), IP-67 (Ingress Protection) and ATA (Air Transportation Association). Unconditionally Guaranteed ... forever.P/N: 1650

MINIMUM: -10° F (-23° C) MAXIMUM: +210° F (+99° C) DIMENSIONS INSIDE: 29” x 17-7/8” x 10-1/2” (73,6 cm x 45,4 cm x 26,7 cm) OUTSIDE: 32-1/2” x 20-1/2” x 11-5/16” (82,5 cm x 52 cm x 28,7 cm) LID DEPTH: 1-7/8” (4,7 cm) CASE DEPTH: 8-5/8” (21,9 cm) BUOYANCY: Floats in salt water with 100 lbs (45,4 kg) load COLORS: Black ACCESSORIES: P/N: Description:1651 Replacement Foam Set (4 Pieces) 1653 Replacement O Ring 1655 Padded Divider Set 1659 Photo / Lid Organizer APPROVALS :• IP 67 • ATA Specification 300 • Military Standard C-4150J


It is made of Ultra High Impact structural copoly-mer that makes it strong and durable.

Its exclusive 1/4” (6.4 mm) neoprene o-ring and ABS ‘easy-to-open’ latches seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. It is equipped with heavy duty wheels, a retractable extension handle and multiple fold

down carrying handles. Your equipment can fit into the high density foam or padded dividers for total subjection and protection against impact, vibration or shock. A nameplate (included) can be personalized (engraved at additional cost). This is the biggest case ever made by Pelican .Unconditionally Guaranteed ... forever.P/N: 1660

TEMPERATURE RATING MINIMUM: -10° F (-23° C) MAXIMUM: +210° F (+99° C) DIMENSIONS INSIDE: 29-1/8” x 20-11/16” x 17-5/8” (74 cm x 52,5 cm x 44,8 cm) OUTSIDE: 31-1/2” x 22-7/8” x 18-7/8” (80 cm x 58,1 cm x 47,9 cm) LID DEPTH: 3-1/2” (8,9 cm) CASE DEPTH: 14-1/16” (35,8 cm) BUOYANCY: Floats in salt water with 115 lbs (52,2 kg) load COLORS: Black ACCESSORIES: P/N: Description:1661 Replacement Foam Set (4 Pieces) 1662 Pick ‘N’ Pluck™ Foam only 1663 Replacement “O”Ring 1665 Padded Divider Set 1669 Photo / Lid Organizer 1507 Peli Quick Mounts

1750 CASETRAVEL VAULT®

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof. These are some of the features of this Pelican™ Protector Case™ that offers total; protection for your equipment. It is made of Ultra High Impact structural copolymer that makes it strong and durable. Its exclusive 1/4” (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an automatic purge valve for quick equaliza-tion after changes in atmospheric pressure. It has transport wheels for better handling. Your equipment can fit into the high density foam of the case for total subjection and protection against impact, vibration or shock. A nameplate (included) can be personalized (engraved at additional cost). This case is NATO codified and tested to MIL C-4150J (Military Standard), IP-67 (Ingress Protection) and ATA (Air Transportation Association). Unconditionally Guaranteed ... forever.P/N: 1750

MINIMUM: -10° F (-23° C) MAXIMUM: +210° F (+99° C) DIMENSIONS INSIDE: 50-1/2” x 13-7/16” x 5-1/4” (128,3 cm x 34,1 cm x 13,3 cm) OUTSIDE: 53” x 17-7/16” x 6-1/16” (134,6 cm x 44,3 cm x 15,4 cm) LID DEPTH: 1-3/4” (4,4 cm) CASE DEPTH: 3.5” (8,9 cm) BUOYANCY: Floats in salt water with 55 lbs (25 kg) load

COLORS: Black Od green ACCESSORIES: P/N: 1751 - Replacement Foam Set (3 Pieces) P/N: 1753 - Replacement O Ring APPROVALS: • IP 67 • ATA Specification 300 • Military Standard C-4150J

Pelican Shipping CaseAccessories

1010 Micro Case• GREAT FOR RUGGED SPORTS - NOT FOR SWIMMING OR SUBMERGING• Water resistant, crushproof, and dust proof• Easy open latch• Rubber liner for extra protection doubles as o-ring seal• Stainless steel hardware• Lanyard• Unconditional Lifetime Guarantee of Excellence• Available in clear with color liner or solid

Specifications:Exterior Dimensions (L x W x D)5.43” x 4.06” x 2.12” (13.8 x 10.3 x 5.4 cm)Interior Dimensions (L x W x D)4.37” x 2.87” x 1.68” (11.1 x 7.3 x 4.3 cm)Weight with Foam: : -10 / 199.4° F (-23 / 93° C) 1010 Micro Case Certificates• IP67 (1 meter submersion for 30 minutes)P/N: 1010005240

BLUE FOAM INSERT FOR 1010 CASEREPLACEMENT CASE LINER-BLUEP/N: 1011-BLUE

i1010 Case

iPod Not included• GREAT FOR RUG-GED SPORTS -NOT FOR SWIMMING OR SUBMERGING• Water resistant, crush-proof, and dust proof• Protect your player while using it via the external headphone jack• Lid organizer stores earphones• Active sport double end tie down strap with reflective safety stripes• Easy open latch• Custom rubber liner doubles as o-ring seal• Stainless steel hardware• Unconditional Lifetime Guarantee of Excel-lence• Designed for any iPod®, Nano, and Shuffle™

TOOLs

14


Fax: 1-800-828-0623

http://www.edmo.com

Specifications:Exterior Dimensions: (L x W x D)5.43” x 4.06” x 2.12” (13.8 x 10.3 x 5.4 cm)Weight with Foam: 0.41 lbs. (0.19 kg)Temperature Range: -10 / 199.4° F (-23 / 93° C)P/N: 1010015230

1080 HardBack™ Case• Watertight, crushproof, and dust proof• Molded plush foam liner - protects notebook from impact shock and scratches• Easy snap anodized aluminum latch• O-ring seal• Vent with Gore-Tex® membrane for auto pressure balance• Comes in two attractive color combinations - charcoal grey with silver latches or black with black latches• Unconditional Lifetime Guarantee of Excellence• Fits notebook computers up to 12.3” L x 9.3” W x 1.5” D• Will hold 8.5 x 11” and A4 documents

Specifications:Exterior Dimensions (L x W x D)13.75” x 10.95” x 2.55” (34.9 x 27.8 x 6.5 cm)Weight with Foam: 2.89 lbs. (1.31 kg)Range Temperature: -10 / 200° F (-23 / 93° C)P/N: 1080000110

1150 Case

Watertight, crushproof, and dust proof• Open cell core with solid wall design strong, light weight• O-ring seal• Automatic Pressure Equalization Valve• Stainless steel hardware• Pick ‘N’ Pluck™ with convoluted lid foam• Unconditional Lifetime Guarantee of Excellence

Specifications:Exterior Dimensions(L x W x D)9.12” x 7.56” x 4.37” (23.2 x 19.2 x 11.1 cm)Weight with Foam: 1.98 lbs. (0.9 kg)Range Temperature: -10 / 210° F (-23 / 99° C)P/N: 1150O

1430 Top Loader Case• Watertight, crushproof, and dust proof• Easy open Double Throw latches• Open cell core with solid wall design - strong, light weight• O-ring seal• Automatic Pressure Equalization Valve• Comfortable rubber over-molded handle• Stainless steel hardware and padlock protectors• 3 level Pick ‘N’ Pluck™ with convoluted lid foam• Unconditional Lifetime Guarantee of Excellence• Unique top loading design

Specifications:ExteriorDimensions:(L x W x D)16.93” x 9.61” x 13.42” (43 x 24.4 x 34.1 cm)Weight with Foam: 6.5 lbs. (2.95 kg)Range Temperature: -10 / 210° F (-23 / 99° C)P/N: 1430

1550BNF Case (no foam)Interior Dimensions:

18.43” x 14.00” x 7.62” (46.8 x 35.5 x 19.3 cm)• Watertight, crushproof, and dust proof• Lid organizer clear cover with Velcro® fasteners - keep supplies in place during transport• Automatic Pressure Equalization Valve• Stainless steel padlock protectors• Unconditional Lifetime Guarantee of Excel-lenceP/N: Description:1550BNF Black, no foam1550DTNF Tan, no foam1550GNF Green, no foam1550Y Yellow, no foam

1520NF Case (no foam)• Watertight, crushproof, and dust proof• Easy open Double Throw latches• Open cell core with solid wall design - strong, light weight• O-ring seal• Automatic Pressure Equalization Valve• Comfortable rubber over-molded handle• Stainless steel hardware and padlock protectors• Personalized nameplate service available• Unconditional Lifetime Guarantee of Excellence

Specifications:Exterior Dimensions (L x W x D)19.12” x 15.43” x 7.56” (48.5 x 39.2 x 19.2 cm)Range Temperature: -10 / 210° F (-23 / 99° C)P/N: 1520NF

1560B Case

• Watertight, crush proof, and dust proof• Easy open Double Throw latches• Open cell core with solid wall design - strong, light

weight• O-ring seal• Automatic Pres-sure Equalization Valve• Comfortable rubber over-molded top and side handles• Stainless steel hardware and padlock protectors• 2 level Pick ‘N’ Pluck™ with convoluted lid foam• Personalized nameplate service available• Unconditional Lifetime Guarantee of Excellence• Retractable extension handle• Strong polyurethane wheels with stainless steel bearings

Specifications:Exterior Dimensions (L x W x D)22.06” x 17.93” x 10.43”(56 x 45.5 x 26.5 cm)Weight with Foam:20 lbs. (9.07 kg)Range Temperature:-10 / 210° F (-23 / 99° C)P/N: 1560B

1569 Lid Organizer for 1560P/N: 1569

TSA Lock(Fits any PELICAN™ Case)• Special TSA accepted lock• TSA personnel can safely lock and unlock• You can choose from thou-sands of combinationsP/N: 1506TSA

TOOLs

14



1600 Case

• Watertight, crushproof, and dust proof• Open cell core with solid wall design - strong, light weight• Automatic Pressure Equalization Valve• O-ring seal• Comfortable rubber

over-molded handle• Stainless steel hardware and padlock protectors• 2 level Pick ‘N’ Pluck™ with convoluted lid foam• Personalized nameplate service available• Unconditional Lifetime Guarantee of Excellence

Specifications:Exterior Dimensions (L x W x D)24.25” x 19.43” x 8.68” (61.6 x 49.3 x 22 cm)Weight with Foam: 14.11 lbs. (6.4 kg)Range Temperature: -10 / 210° F (-23 / 99° C)

P/N: Description:1600G Green Case1600O Orange Case

1620 Case (Desert Tan)

• Watertight, crush-proof, and dust proof• Easy open Double Throw latches• Open cell core with

solid wall design - strong,

light weight• O-ring seal

• Automatic Pressure Equaliza-tion Valve• Fold down handles

• Stainless steel hardware &

padlock protectors• 4 level Pick ‘N’ Pluck™ w/

convoluted lid foam• Personalized nameplate service available• Unconditional Lifetime Guarantee• Retractable extension handle• Strong polyurethane wheels with stainless steel bearings

Specifications:Exterior Dimensions (L x W x D)24.81” x 19.37” x 13.87” (63 x 49.2 x 35.2 cm)Weight with Foam: 26.01 lbs. (11.8 kg)Range Temperature: -10 / 210° F (-23 / 99° C)P/N: 1620001190

1630 Transport Case• Watertight, crushproof, and dust proof• Easy open Double Throw latches• Open cell core with solid wall design - strong, light weight• O-ring seal• Automatic Pressure Equalization Valve• Fold down handles• Stainless steel padlock protectors• 3 level Pick ‘N’ Pluck™ with convoluted lid foam• Personalized nameplate service available• Unconditional Lifetime Guarantee of Excellence• Retractable extension handle• 4 strong polyurethane wheels with stainless steel bearings

Specifications:Exterior Dimensions (L x W x D)31.28” x 24.21” x 17.48” (79.4 x 61.5 x 44.4 cm)Weight with Foam: 36 lbs. (16.33 kg)Range Temperature: -10 / 210° F (-23 / 99° C)P/N: 1630

1640 Transport Case

• Watertight, crushproof, and dust proof• Easy open Double Throw latches• Open cell core with solid wall design - strong, light weight

• O-ring seal• Automatic Pres-

sure Equalization Valve• Fold down

handles• Stainless steel

padlock protectors• 3 level Pick ‘N’ Pluck™ w/

convoluted lid foam• Personalized nameplate service available• Unconditional Lifetime Guarantee of Excellence• Retractable extension handle• 4 strong polyurethane wheels with stainless steel bearings

Specifications:Exterior Dimensions (L x W x D)27.20” x 27.50” x 16.30” (69.1 x 69.8 x 41.4 cm)Weight with Foam: 38 lbs. (17.24 kg)Weight without Foam: 34 lbs. (15.42 kg)Range Temperature: -10 / 210° F (-23 / 99° C)P/N: Description:1640000110 Black with foam1640001110 Black no foam

1660 Case (no foam)• Watertight, crushproof, and dust proof• Easy open Double Throw latches• Open cell core with solid wall design - strong, light weight• O-ring seal• Automatic Pressure Equalization Valve• Large 2-person fold down handles• Stainless steel hardware and padlock protectors• 3 level Pick ‘N’ Pluck w/convoluted lid foam• Personalized nameplate service available• Unconditional Lifetime Guarantee of Excellence• Retractable extension handle• 4 strong polyurethane wheels with stainless steel bearings

Specifications:Exterior Dimensions (L x W x D)31.50” x 22.87” x 19.00” (80 x 58.1 x 48.2 cm)Weight without Foam: 34.17 lbs. (15.5 kg)Range Temperature: -10 / 210° F (-23 / 99° C)Color: BlackP/N: 1660NF

1700 Weapons Case• Watertight, crushproof, and dust proof• Easy open Double Throw latches• Open cell core with solid wall design - strong, light weight

• O-ring seal• Automatic Pressure Equalization Valve• Fold down side handle• Strong polyurethane wheels with stainless steel bearings• Stainless steel hardware and padlock protectors• 3-piece foam set• Unconditional Lifetime Guarantee of Excellence

Specifications:Exterior Dimensions (L x W x D)38.12” x 16.00” x 6.12” (96.8 x 40.6 x 15.5 cm)Weight with Foam: 16.98 lbs. (7.7 kg)Range Temperature: -10 / 210° F (-23 / 99° C)P/N: Description:1700000130 Green Weapons Case1700000190 Desert Tan Weapons Case

TOOLs

14


Fax: 1-800-828-0623

http://www.edmo.com

Hardigg Storm Cases provide the safest transport-able environment for sensitive, expensive or vital equipment. A full line of sizes covers almost every utilization, in practically any environment. • Tough, Rugged and Lightweight• Airtight, Watertight, Impervious to Mother Nature• Dent-resistant, Shatter-resistant, Virtually Unbreak-able• Guaranteed for Life• Safe and Secure• Nothing stands up to the power of the Storm

Model #: Interior: Exterior: Empty: Wheels and Airline Dimensions Dimensions Weight Telescoping Carry (inches) (inches) (lbs) Handle oniM2100 13.0 x 9.2 x 6.0 14.2 x 11.4 x 6.5 4.8 N YiM2200 15.0 x 10.5 x 6.0 16.2 x 12.7 x 6.6 5.6 N YiM2300 17.0 x 11.7 x 6.2 18.2 x 13.4 x 6.7 6.8 N YiM2400 18.0 x 13.0 x 6.7 19.2 x 15.2 x 7.3 7.8 N YiM2500 20.5 x 11.5 x 7.2 21.7 x 14.1 x 8.9 12.7 Y YiM2600 20.0 x 14.0 x 7.7 21.2 x 16.0 x 8.3 8.3 N NiM2700 22.0 x 17.0 x 8.0 24.6 x 19.7 x 8.6 13.0 N NiM2720 22.0 x 17.0 x 10.0 24.6 x 19.7 x 11.7 19.0 Y NiM2750 22.0 x 17.0 x 12.7 24.6 x 19.7 x 14.4 20.9 Y NiM2950 29.0 x 18.0 x 10.5 31.3 x 20.4 x 12.2 23.7 Y N

Colors: Available in black, gray, and yellow. Olive Drab available for military applications.

Interior Options: Cubed Foam Lining and Lid Stays are available on all models. Bezel Kits are available on models iM2100 through iM2600.

Hardigg Shipping Case Accessories

Examples of equipment in Hardigg Storm cases with custom cut foam.

Hardigg Storm Cases

TOOLs

14



Field Desks &Footlockers

HARDIGG FIELD DESKS & FOOTLOCKERS

Olive Field DeskP/N: 472FLDDESK

27”

43”

20”

Field Book ShelfP/N: 472BKSH100

29”

12”

14”Foot Locker:P/N: Color:472FTLK133 Gray472FTLK137 Olive Drab

Trunk Locker:P/N: Size:472TRLKLG Large472TRLKSM Small

21.5”

14.5”

14 1

/4”

Note: Dimensions are all “inside” dimensions

19”

33.5”

Weapons CasesWe provide heavy duty, water resistant, waterjet cut-out foam for your weapons. Also available for a single M16 and pair of M203’s

The absolute necessity of safeguarding military weapons during shipping and storage is obvi-ous to everyone in the forces. The best way to ensure that all weapons, weapon parts, main-tenance equipment, and weapon systems will arrive intact and combat-ready is by using the best reusable shipping cases available.

Hardigg designs and manufactures the most top-notch rugged plastic containers in the industry.

P/N: CASE-M162(fits two M16s)

WITH THE

YOU CAN...

ALL FROM YOUR DESKTOP!

EDMOCOPILOT

EDMOCOPILOT

View Featured Closeouts

See the Deal of the Day

Check product pricing and availability

Learn more atWWW.EDMO.COM

Documents

ferramentas catálogo EDMO