Ferno Australia Export Catalogue Aust... · Ferno Australia’s purpose-built factories are located around the country – in Brisbane, Perth and Melbourne – all of which are equipped

When it’s critical

Ferno Australia Export Catalogue 2011

Ferno Australia – Exporting When It’s Critical

Ferno Australia’s equipment has been trusted for more than 36 years by first responders who look to our products for their renowned quality, reliability and innovative technology. No matter where we live, at some point our customers will be faced with the responsibility of saving lives from either a natural or man-made disaster. How prepared they are will depend on how well we support them to plan in advance.

Whether used on scene at accidents, emergencies, rescues and workplace incidents; for treating and transporting the wounded or deceased; providing the optimum rescue and safety performance through pre-and post-incident response, Ferno Australia’s equipment is designed, manufactured and available to be distributed around the world to perform when it’s critical.

Our many patented designs – some of them now industry standard and award-winning – are built for a purpose yet designed with superior function and form. From the sweltering heat of underground mines to barren deserts or windy, ice-capped mountains, our gear is built tough to withstand the harshest world-wide environments, and tailored to help people accomplish their mission wherever or however challenging it may be: quicker, safer and more precisely. That’s the Ferno way.

Our locally manufactured products include:

• Industrial and rescue stretchers • A full selection of patient restraints and harnesses • Stretcher locks and accessories • Carry chairs • Emergency softpacks and holsters • First aid containers • Industrial height safety and rescue harnesses • Arbor and industrial sit harnesses • Rock climbing and recreational harnesses • Industrial tripods • Rescue and recovery systems and accessories • Height safety softgoods • Rope and rope care products • Roof anchors and brackets

Ferno Australia’s purpose-built factories are located around the country – in Brisbane, Perth and Melbourne – all of which are equipped with complete engineering facilities with a highly skilled workforce and dedicated research and development teams. Our warehouse and distribution centre maintains an inventory of products ready to meet your required demands.

Ferno Australia is one of the fastest growing international suppliers of emergency and rescue products within the Ferno group of companies due to its many decades of experience, combined knowledge, industrial design expertise, responsiveness and competitive pricing. Today, we deliver more than 10,000 product types to customers all around the world including Australia, New Zealand, UK, Europe, North America, Asia Pacific and the Middle East.

Ferno Australia and our various manufacturing divisions welcome the opportunity to support your needs with the finest equipment, specialised modifications, accessories and parts. In Ferno Australia’s equipment, your customers are assured of unmatched functionality capable of enduring any harsh environment, giving them many years of trusted support when it’s critical.

Contents

Rescue and Industrial Stretchers and Accessories (page 2 to 5)Vertical Rescue StretcherRes-Q-Mate StretcherStretcher HandlesLifesaver StretcherStretcher Handle Shoulder HarnessAdjustable Lifting BridlesRescue Sling/HarnessCarry CasesTagline SetEmergency Pole StretchersFibreglass Backboard

Patient Handling & Restraint (page 6 to 8)EZ-Glide HeadrestCarry ChairsAdult HarnessesChild HarnessesBaby Capsule HarnessPatient RestraintsPsychiatric Restraint SetWalk BeltMattressesCarry & Disposable Sheets

Stretcher & Patient Accessories (page 9 to 10)Floor LocksIV PolesTorch HolderEquipment BracketEquipment TableBariatric HarnessMobile Privacy Screen

Emergency Softpacks, Kits and Holsters (page 11 to 12)Oxygen Carry KitsTrauma KitsBelt HolstersGlove Pouches Belt First Aid KitsFirst Aid Packs

First Aid Containers (page 13)First Aid BoxesCompact First Aid Boxes

Harnesses (page 14 to 23)Full Body HarnessesArbor Sit HarnessesIndustrial Sit HarnessesRock Climbing and Gym HarnessesChest Harnesses

Height Safety Softgoods and Kits (page 24 to 31)LanyardsPole StrapsRoofers KitTower Workers KitPole Top Rescue KitExodus KitIndustrial SlingsGirth Hitch SlingEtriers & AidersRescue Personal LanyardDaisy ChainsRope SaversThrow & Shot BagsTool StropsTool Wrist LoopsSpike PadsHelmet Sunbrero

Rope and Rope Care Products (page 32) Rope Protectors Rope and Harness Wash Rope Safety Lines Rope Finishing

Bags and Climbing Accessories (page 33 to 35)Rope BagsMulti PouchGear BagsExpedition Duffel BagHaul BagBagpackChalk BagsChalk Bag BeltGear SlingDaisy ChainPrusik StirrupsFloor Belay Station SlingNeat SeatOutdoor Lanyards

Roof Anchors & Brackets (page 36 to 38)Temporary Roof AnchorsPermanent Roof AnchorsRoof Ladder BracketsLadder Systems

Edge Management, Rescue & Escape (page 39 to 43)TripodRescue WinchDavit SystemArachnipod Edge Management SystemRes-Q-Link Recovery PoleRescue Pulley SystemMini Haul KitEmergency DescendersPrusik Minding Pulley

2

Resc

ue a

nd In

dust

rial S

tret

cher

s an

d A

cces

sorie

s

3

Ferno Vertical Rescue Stretcher Code VRES STRETCH

The Ferno Vertical Rescue Stretcher’s roll-up, compact and lightweight design makes it ideal for high angle, confined space, horizontal or vertical rescue. When deployed the wrap-around concept becomes rigid and gives the patient a feeling of security as well as protecting limbs and body from further injury during evacuation procedures. The Vertical Rescue Stretcher is fitted with many carry handles as well as six lifting slings that provide a good variety of options for transportation and lifting. Also supplied standard is an integral and comprehensive, colour-coded, full body restraint system that includes a padded head restraint, six over body restraints, shoulder and groin straps along with a generous foot strap to assist with vertical lifts. When not in use the Vertical Rescue Stretcher rolls up and is easily housed within the cordura storage bag which doubles as a backpack. Also available in military colours.

Key Features

• Constructed from internal high density polyethylene with a mixture of tough 1000 and 1680 denier Cordura with a heavy polyurethane coating

• Various carry handles and lift slings provide many options for transport or evacuation lifting

• Integral, colour-coded, head, shoulder, groin and foot restraints • Six exterior restraint straps assist to wrap and secure stretcher around the

patient • Includes a Cordura storage bag with backpack shoulder straps

Product Specifications

Length Width Weight Load Limit Horizontal Load Limit Vertical

202 cm 77 cm 8 kg 350 kg 250 kg

Ferno VRS 6 Point Lift Bridle Code BRB-VRS

The Ferno VRS 6 Point Lift Bridle has been designed specifically to fit the Vertical Rescue Stretcher. Each adjustable sling arm is colour coded and identified to ensure correct placement. Rated to 25 kN

2 3

Rescue and Industrial Stretchers and Accessories

Ferno Res-Q-Mate Rescue Stretcher Code FWE2060 (Res-Q-Mate complete) BRB-2063 (lifting bridle)

Length Width Depth Weight with pack & bridle Load Limit

Folded & Packed 100 cm 28 cm 18 cm 17.5 kg -

Deployed 185 cm 28 cm 10 cm 17.5 kg 180 kg

Ferno’s Res-Q-Mate Rescue Stretcher is specifically designed for rapid evacuation in building collapses, mine rescue, helicopter and confined space rescue. The rigid frame also provides an ideal platform to evacuate suspected spinal injuries. Torso and leg flaps comfortably wrap around the patient while a head restraint and four adjustable, colour-coded, chest, thigh and lower leg straps assist in securing the patient. Additional restraint is provided via an exterior v-shaped arm strap and a long foot end strap designed for a figure-of-eight configuration. There are also six built-in carry handles that provide rescuers with various carrying options. Constructed of high grade stainless steel and quality synthetic materials the Res-Q-Mate is impervious to oil, water, grease and other petroleum products making it easy to clean and also resistant to rot and corrosion. When not deployed the unit folds compact and sits neatly inside a heavy-duty reflective backpack. Each Ferno Res-Q-Mate Rescue Stretcher comes complete with a four-point lifting bridle, 50 m tag line system, adjustable head restraint, head pillow and reflective backpack.

Ferno Res-Q-Mate Stretcher Handle Kit Code FWE2062 (Carry Handles pair with bag)

When the Ferno Res-Q-Mate Stretcher needs to be carried for any lengthy period the Handle Kit offers greater carrying options for the rescuer by providing more comfortable and lift friendly positions. The Handle Kit conveniently locks in position at either end of the stretcher. Ideally the Res-Q-Mate Handle Kit should be used with the Ferno Stretcher Handle Shoulder Harness so that the combined weight of the patient and stretcher can be transferred from the arms and evenly shared through the shoulders, chest and back.

shown with optional stretcher handle shoulder harness

Ferno LifeSaver Rescue Stretcher Code FWELS

The Ferno LifeSaver Stretcher is a modern version of the traditional Neil Robertson Stretcher and is designed to be both quick and easy to use in horizontal and vertical lift situations where minimum bulk is a consideration. The LIfeSaver Rescue Stretcher comes complete with integral leg and torso flaps that envelope the patient like a traditional corset which is complimented by a simple head restraint, five built-in patient restraints and a long foot strap. It is fitted with various carry handles and stainless steel rings that are used at the foot and head end for guiding and lifting the stretcher in vertical applications. The compact, roll-up design makes storing and transporting the stretcher easy. The LifeSaver Rescue Stretcher is made with full length 5 mm ribs interwoven in tough 1000 denier, high tenacity, nylon fabric to provide full body splinting in a very narrow patient package. Also available in military colours.

Length Width Height Weight Load Limit

153 cm 104 cm 3 cm 5 kg (full system) 159 kg

4

Resc

ue a

nd In

dust

rial S

tret

cher

s an

d A

cces

sorie

s

5

Designed to be attached to either the Res-Q-Mate Handle Kit or the Traverse Stretcher Handles. For longer hauls and walk outs the Shoulder Harness combined with a handle kit offers rescuers a more comfortable, balanced lift options and transfers weight solely from the arms and distributes to the shoulders, chest and back.

Ferno Stretcher Handle Shoulder Harness Code BRH-2061

Ferno Adjustable Lifting Bridle Code BRB-TLB (24 mm screw gate karabiner) and BRB-TLB-TX11S (65 mm screw gate karabiner)and BRB-TLB-LTa (large triplock karabiner)

Key Features

• Individually adjustable arms • Drop forged lifting ring, adjusters and sliding bar buckles • UV resistant webbing rated at 2520 kg (25 kN) • Additional wear strips where hardware meets webbing • Big bright orange tabs for easy adjustment • Choice of karabiners available

The Ferno Adjustable Lifting Bridle is available with a variety of karabiner options. Common features include adjusters on each of the four arms so the stretcher can quickly be set at the best angle for patient comfort or for the individual rescue requirements. The BRB-TLB is supplied with four steel, screw gate karabiners with 24 mm gate opening suitable for use with the Traverse Titan and Gazelle Stretchers. The BRB-TLB-TX11S (steel, screw gate karabiner) and the BRB-TLB-LTA (steel, triplock karabiner) have extra large gate openings making them suitable for use with the Ferno 71 Series stretchers.

Vertical Rescue Triangular Harness Code VRES TRI HaRN

The Vertical Rescue Triangular Harness is a simple yet robust patient lifting sling designed for all forms of rapid vertical extrications. The simple design allows the harness to be applied to the patient easily and quickly compared to other full body rescue harnesses. The Vertical Rescue Triangular Harness secures the patient during a lift. This harness is not suitable for patients with suspected spinal injuries.

Spreader Bar Code VaI SPREaDER SHa

Patient Lifting Sling Code VRES PaT LIFT+

Used in confined space situations and rescue scenarios. Attaches to confined space pick up points on harness shoulder straps.

AS/NZS 1891.1:2007 approved.

Ideal for retrieval of victims trapped in locations where time and rescue is of the essence. Simple to apply and fully adjustable in confined and difficult situations. Seat and leg loops hold victim securely.

Ferno Rappel Belt Code VaI RaPPEL

The Ferno Rappel Belt is designed for situations where an instant evacuation or extrication is the only resort. It is manufactured from quality 44 mm webbing and plated steel components.

• Secure sliding bar buckle for ultra fast donning • Steel D-ring attachment point • Velcro loop keeps D-ring stowed until required • Velcro keeps the web belt end neatly secured,

preventing any possibility of entanglement or slippage • Rated to 6 kN - restraint fall

Key Features

Ferno Tagline Set Code VRES TaG LINE

A tagline controls the movement of the stretcher during a short haul or hoist operation. The Ferno Tagline Set includes 50 m of 3 mm cord, a steel oval maillon rapide (quick link) and a quick release stainless steel snap shackle. It is stored in a bag that is large enough to fit other stretcher accessories if required. Weight 600 g.

Ferno Emergency Pole Stretcher Code FWE108aF (dual fold) and FWE108a (single fold)

The Ferno Emergency Pole Stretchers 108A and 108AF are lightweight, high-strength emergency stretchers suitable for first aid response, industrial sites and casualty rooms. They are made with PVC coated nylon covers that are heat sealed making them resistant to blood, body fluids and mildew and easy to clean. All Ferno Emergency Pole Stretchers feature lightweight aluminium poles with contoured, flexible hand grips for easy handling. Both stretchers fold however 108AF also hinges at the centre permitting the stretcher to dual fold for compact storage. Available in standard emergency orange with optional wall mounted carry cases. Accessories include carry case for the 108AF model MCC-383B and MCC-384C for the 108A.



231 cm 55 cm 14 cm 6 kg 159 kg

Ferno 889P Fibreglass Backboard Code BSBF-889P (with 3 velcro restraints), BSBF-889P/B (no restraints)

Patient and user comfort is paramount in the Ferno 889P Fibreglass Backboard design.

• 10 raised hand grips that allow easy hand access • Wide and thick handgrip spaces for comfortable lifting • 10 restraint pins • Foot and head ends are tapered for manoeuvring in confined spaces • Concave surface which cradles patient • X-ray transparent • Dimensions: L 183 cm x W 41 cm • Weight 8 kg • Load Limit 159 kg

Key Features

4 5

Rescue and Industrial Stretchers and Accessories

Ferno Stretcher Carry CasesFerno offers a range of carry cases to suit many of the stretchers shown in this catalogue. Made from heavy-duty, rip-stop, PVC.

MCC-383B Carry case for 108AF Pole Stretcher

MCC-385A Carry case for Ferno 11 Stretcher

MCC-889 Carry case for Najo Backboards and 889P Spineboard

MCC-385C Carry case for EXL and Saver Scoop Stretchers

MCC-387A Carry case for one-piece basket stretchers

MCC-387B Carry case for two-piece basket strechers

MCC-2040 Carry case for Ferno 2040 Series Stair Chairs

031-4023 Carry case for Ferno 59T and 59 Evacuation Chair

Vertical Rescue Triangular Harness Code VRES TRI HaRN

Ferno Compact Carry Chairs

Ferno EZ-Glide Headrest

The Ferno Compact Carry Chairs are simple, effective and lightweight for use in the ambulance and pre-hospital environments. They fold to a compact size for convenient handling and in vehicle storage. A tall back section offers support across the patient’s shoulders and a large foot area is also provided for patient comfort. Moulded foot and head-end hand grips enhance comfort and stability for the attendant. Each model is supplied standard with chest and ankle restraints. Available in two widths, the most narrow (38 cm) is suitable for narrow aisle evacuation such as aircraft, bus and trains. An optional storage/carry case is available.

The EZ-Glide Headrest is designed to support the patients head when transporting or carrying on stairs. The EZ-Glide Headrest secures firmly into place between the rear lift bars of the 59T EZ-Glide Evacuation Chair and can be easily adjusted to suit the patient’s height by sliding to the appropriate position. For additional security and patient comfort a simple head restraint strap is also supplied. The EZ-Glide Headrest conveniently folds to a compact size for storage in a handy carry case that can be stored at the back of the 59T EZ-Glide Chair ready for immediate use. Weight 600 g

The Ferno Carry Chair 2040 has two large 150 mm rear wheels and is supplied with 1 x 50 mm plastic buckle chest restraint and 1 x 25 mm plastic buckle ankle restraint.


Ferno Carry Chair 2041 Code FWE2041

The Ferno Carry Chair 2041 has all the features of the Ferno Carry Chair 2040, however it is 20 mm narrower and has two additional wheels positioned under the footplate at the front of the chair to assist with the manoeuvrability in confined spaces and aisle ways such as those found on buses, trains and aircraft. The Ferno Carry Chair 2041 is supplied with 2 x 100 mm velcro chest and thigh restraint and 1 x 25 mm plastic buckle ankle restraint.


The Ferno Carry Chair 2042 has the same chair structure as the 2041, with small front swivel wheels under the foot plate but has the wider width of the 2040 at 400 mm. The 2042 is supplied with 2 x 50 mm metal buckle restraints.


Model 2040 Open 126 cm 40 cm 91 cm 11 kg 160 kg

Model 2040 Folded 81 cm 40 cm 20 cm 11 kg -






Model 2042 Model 2041 Model 2041(Folded)

6

Patie

nt H

andl

ing

& R

estr

aint

7

Ferno 417 Adult Harness Code BRH-417

Developed in conjunction with various Australian ambulance services, the multi-functional two-piece design allow users to fit or remove the harness to the patient while on the stretcher. The design also allows the harness to be fitted under or over existing linen, allowing for easier, uninterrupted transfer of patients. The Ferno 417 Adult Harness is part of a complete suite of approved and compliant harness systems that provides restraint for newborns to obese adults.

The Ferno 417 Adult Harness has been dynamically crash tested to 20 G forward and 10 G sideward and is compliant with ambulance crash test standards AS/NZS 4535:1999. *

Ferno QR Pedi Mate Code BRH-678-QR

The Ferno QR Pedi Mate is an innovative, fully adjustable, seven point harness and restraint system that provides the ideal solution for the safe control of paediatrics during ambulance transportation. The Ferno QR Pedi Mate can be used with the backrest inclined or supine. An illustrated patient pad and simple quick release buckles allow for efficient fitting and removal from stretcher. The patient restraints and buckles are smaller and low profile and provide a safe, logical and non intrusive fit to paediatrics. The Ferno QR Pedi Mate rolls to a compact size, allowing for ease of storage and quick retrieval and is suitable for paediatrics between 3.2 kg and 18 kg. The Ferno QR Pedi Mate Harness is part of a complete suite of approved and compliant harness systems that provides restraint for newborns to obese adults.

It has been dynamically crash tested with a 9 kg and 18 kg crash dummy to 20 G forward and 10 G sideward as per ambulance crash test standards AS/NZS 4535:1999.*

Ferno Baby Capsule/Convertible Chair Harness Codes BRH-419 (Baby Capsule Harness), BRH-420 (Convertible Chair Harness)

Ferno Baby Capsule and Convertible Chair Harnesses have been developed as an interface between various Ferno stretchers and Australian style baby capsules and convertible chair/capsules and form part of the complete suite of approved and compliant harness systems that provides restraint for newborns to obese adults. The harnesses have been dynamically crash tested to 20 G forward and 10 G sideward and are compliant with ambulance crash test standards AS/NZS 4535:1999.*

* Can only be fitted and used in conjunction with stretchers that have been fitted with the Ferno Harness Mount Kit Model 417/MKIT.

Ferno Patient RestraintsFerno offers a complete range of restraints with various colour and length options. These include:

BRR-TRAVREST Two-piece five foot double bar buckle BRR-43017 One-piece seven foot metal buckle BRR-43017P One-piece seven foot plastic buckle BRR-43025 Two-piece five foot metal buckle BRR-43025SC Two-piece five foot metal buckle with speed clip connectors BRR-43025P Two-piece five foot plastic buckle BRR-43025PSC Two-piece five foot plastic buckle with speed clip connectors BRR-43027 Two-piece seven foot metal buckle BRR-430VSC Velcro one-piece restraint, variable in length, with speed clip connectors

6 7

Patient Handling &

Restraint

The Universal Psychiatric Restraint Set is designed for use on a variety of stretchers or beds. It features two single wrist cuffs and a double ankle cuff strapping system. Each cuff features a padded, double overlap, strap system secured with velcro and is adjustable to a variety of limb sizes. An adjustable tie down loop provides some flexibility in attachment points and length of strap and is fitted with a quick connect, double action, industrial rated buckles. Machine washable.

Universal Psychiatric Restraint Set Code BRH-MPR

Ferno Walk Belt Code FWE-WB-LS

The Ferno Walk Belt has been purpose designed for paramedics and emergency healthcare professionals to assist patients while walking, particularly where an ambulance stretcher, chair or board can not easily be used or for patients that are able to walk a short distance with some assistance. The Ferno Walk Belt secures around a patients waist and is fitted with eight handles, four horizontal and four vertical handles as well as 2 leg straps that substantially reduces the effort required to assist a patient whilst walking. The Ferno Walk Belt can be machine washed and reused repeatedly.

Ferno Bolstered Mattress Code MCM-2650 (26 Series mattress) and MCM-50 (50 Series mattress)

Ferno has designed a bolstered mattress to suit the harsh environment and road conditions experienced in Australia. Our mattress combines four layers of foam with varying densities and shapes to provide the ultimate comfort for patients. Slow recovery foam with bolstered sides creates a centring action that stabilises patients, providing support in transit. Each mattress is covered in soft, flexible, medical grade vinyl on the patient area with durable, hard wearing, medical grade vinyl on the underside to prevent mattress damage. Each mattress is heat sealed to prevent ingress of fluids.

Code Description Carton Qty

DPL-FS50 Stretcher Sheet Fluid Resistant Envelope 180 cm x 75 cm Pkt 50

DPL-FSXL50 Single Bed Sheet (75 mm) Fluid Resist Envelope 190 cm x 90 cm Pkt 50

DPL-PTS50 Flat Sheet Fluid Resistant 230 cm x 120 cm Pkt 50

DPL-TS Stretcher Sheet with Absorbent Pad, Envelope Each

DPL-PS50 Pillow Slip Open 75 cm x 50 cm Pkt 50

Ferno Disposable SheetsThe Ferno Disposable Sheets guard against stains, spills and is an aid in infection control. Available as a flat sheet or as a universal fitted sheet for stretcher mattresses.

Ferno 341 Carry Sheet Code FWE341

The Ferno 341 Carry Sheet is widely accepted as a vital aid in the rapid evacuation of non-ambulance patients from hazardous situations. Suitable for use with medical, surgical, psychiatric and geriatric patients, it is instantly available in emergency situations. Constructed of heavy-duty rip-stop PVC, the Ferno 341 Carry Sheet is easily cleaned and reusable.


Length Width SWL

68 cm 175 cm 159 kg

8

Patie

nt H

andl

ing

& R

estr

aint

9

Made from die-cast stainless steel the Ferno Floor Lock provides unrivalled strength, yet is simple in design and use. The stretcher floor lock hooks are designed to fully capture the front and rear attachment points of the stretcher with one simple pull of the floor lock lever. When fitted correctly the Ferno Floor Lock combined with an approved Ferno harness restraint will provide the user with a complete AS/NZS 4535:1999 system that safely and securely restrains a patient to the stretcher and the stretcher to the ambulance. Ferno Floor Locks have been dynamically crash tested to 20 G forward and 10 G sideward and are compliant with ambulance crash test standard AS/NZS 4535:1999

Ferno 2030 IV Pole Code LaIV-2030

The Ferno 2030 IV Pole is a lightweight permanently attached IV pole that conveniently fits within the side rail of most Ferno stretchers. For after-market installation, each Ferno 2030 IV Pole comes complete with a new side rail for quick and easy fitting. Includes bracket mount for IV accessories and hooks for two IV bags. The IV pole is for mounting on the (patient) left hand side of stretcher only.

Ferno Floor Locks Code La26-FL and La50-FL

LA26 FL is compatible with most 26 and 2650 series stretchers

LA50 FL is compatible with most 50 series stretchers

Ferno Eclipse Torch Holder Code La-2080

The Ferno Eclipse Torch Holder allows a small torch to be placed virtually anywhere on a stretcher for hands free illumination of the immediate area. By adjusting the integral stretch cord it allows manipulation of the torch so that it can be positioned at various angles allowing for perfect adjustment and illumination.

Ferno 2020 Equipment Bracket Code FWE2020

The Ferno 2020 Equipment Bracket is compatible with most Ferno stretchers. It allows for convenient storage of gear while the stretcher is not in an ambulance. The bracket is spring loaded which allows it to automatically retract within the stretcher frame when not in use.

Ferno 2427 Floor Lock Code FWMFL

This floor lock is ideal for use with the Ferno mortuary cot model 24 and 27 and is designed to be quickly removed or fitted to a vehicle floor. The front and rear locking mechanism is attached by steel wing-nuts, allowing removal and fitting by hand to the fixed, low profile base. This allows full access and storage space in the vehicle for other equipment when a stretcher is not required. The rear locking mechanism utilises a simple but effective spring loaded pistol grip handle that captures the rear of the stretcher but swings low when not in use. Ideal for multi-purpose fleet vehicles or situations where low speed transportation is required. Made from heavy-duty steel with a chrome plated finish. The Ferno 2427 does not meet all aspects of ambulance crash test standard AS/NZS 4535:1999.

8 9

Stretcher & Patient A

ccessories

Ferno Equipment Table Code FWE-2100

The Ferno Equipment Table is designed to securely hold essential emergency equipment during patient transport. Tube clamps allow the table to be attached directly to the rails of a stretcher and a side opening gate allows patient transfer without the need to remove the table from the cot. Two integral IV poles with securing velcro straps provide safe and secure transport of up to four IV bags. The Ferno Equipment Table has been dynamically tested with 29 kg to 20G in forward and sideward directions making it the choice of equipment tables for both aeromedical and road ambulance use. It is lightweight and folds for portability and storage and suitable for use on the 155 series litter tops.

* 38 cm from stretcher frame ** SWL = 25 kg on tray plus 2 x 1 litre IV bags per extended IV pole.

Product SpecificationsLength Width Depth Weight SWL

Tray Surface 52.5 cm 36.5 cm 38 cm*

Folded 60 cm 60 cm 12 cm 5 kg 29 kg**

Bariatric Harness shown with optional LBS Jr Mattress

Ferno has drawn on its understanding of current ambulance crash standards and knowledge of Australian fall protection standards to produce an extensive bariatric harness that will withstand the excessive G forces should a bariatric patient be involved in an accident during transportation. The harness is constructed with oversize high strength webbing with adjustable buckles and attaches to both the standard stretcher harness mount points as well as six pre-positioned, floor mounted tie down points via 50 kN steel karabiners. The 417 Bariatric Harness is compatible with the Ferno Powerflexx stretcher fitted with the Ferno LBS Jr.

Ferno 417 Bariatric Harness Code FWE-PFBH

Ferno Mobile Privacy Screen Codes CRP-3M

The Ferno Mobile Privacy Screen is a lightweight, stable and secure screen. Each panel is made with lightweight vinyl that is heat sealed and easy to clean. The rigid frame is constructed from anodised aluminium for easy manoeuvrability and the legs and castors are removable so the unit can be packed flat for storage or freight.


Width Height

Folded 66 cm 158 cm

Extended 192 cm 158 cm

10

Stre

tche

r & P

atie

nt A

cces

sorie

s

11

Ferno Primary Response Kit R400 Code FaPR400

The Ferno Primary Response Kit R400 is an uncomplicated design that allows universal use. The internal layout of the Ferno Primary Response Kit is a combination of fixed, clear faced pockets and removable clear faced modules. A large external pocket further enhances the user’s ability to customise the content layout. The well laid out design and bulky storage areas provide plenty of options for end users. The kit features a comfortable back harness and can also be carried by top mounted carry handle. This kit is available in red and blue.

Dimensions: L 31 cm, W 15 cm, H 50 cm

Ferno Paramedic Rescue Backpack R300 Code FaPR300

The Ferno Paramedic Rescue Backpack is large kit with spacious internal and external storage options. There is a total of 5 external pockets of varying size. The internal layout is a combination of fixed, clear faced pockets and removable clear faced modules. The long body, uncomplicated design and bulky area provides enough space to stock gear for the largest of scenarios. The kit features a comfortable, tuck-away back harness and can also be carried by top mounted carry handle. This kit is available in red and blue.

Dimensions: L 31 cm, W 15 cm - plus pockets, H 60 cm

Oxygen Therapy Kit Code WM-8aU10001

The Oxygen Therapy Kit is simplistic in design and allows storage of all standard oxygen therapy gear. Incorporated into this exclusive, lightweight design is a carry handle and shoulder strap along with a stretcher attachment strap. All sides of the kit incorporates 10 mm foam padding that offers protection for the oxygen bottle and contents. A clear faced window provides vision to the oxygen regulator and additional cylinder straps ensure the cylinder is held securely. A piggy back module sits on the back of the pack for surplus therapy or resuscitation gear. Supplied standard with distinctive check reflective tape.

Dimensions: L 55 cm, W 13 cm, H 24 cm

Contents not included

9

8

7

4

8

4

5

3

3

2

6

Ferno Belt Holsters and Glove PouchesFerno manufactures and supplies a vast range of belt mounted holsters and pouches that are designed to securely hold instruments, torches, gloves and other commonly used tools of the trade. All items are made from heavy-duty nylon and guaranteed to perform.

1. FAPH800 Fits penlight or instrument (image not shown) 2. FAPH600 Fits penlight, instrument 3. FAPH100 Fits penlight, three additional instruments 4. FAPH200 Fits penlight, three additional instruments, stethoscope, glove pouch 5. FAPH275 Fits penlight, three additional instruments, window punch, stethoscope, glove pouch 6. FAPH400 Fits a resuscitation pocket mask 7. FAPGP100 Fits gloves (one pair) 8. FAPGP200 Fits gloves (five pair) 9. FAPGP250 Fits gloves plus resus shield

10 11

Emergency Softpacks, Kits and H

olsters

Length Width Height

FAHAD-200GR 10 cm 4 cm 14 cm

FAHAD-300GR 14 cm 8 cm 10 cm


Saver Belt First Aid Kits 200GR and 300GR Codes FaHaD 200GR and FaHaD 300GR

Carrying basic personal first aid requirements for work or outdoors is made easy with the Saver Belt First Aid Kits 200GR and 300GR. The kits are available in green.

Saver First Aid Kit 700GR Code FaHaD-700GR

The Saver First Aid Kit 700GR is ideal for home, work and outdoor activities. Numerous inner pouches and elastic loops store and organise a good supply of first aid items. This kit is available in green.

Length Width Height

21.5 cm 7.5 cm 15 cm


Saver First Aid Kit 800GR Code FaHaD-800GR

The Saver First Aid Kit 800GR has numerous inner pouches and elastic loops, making it ideal for storing and organising a variety of first aid items. It is suitable for home, work and outdoor. This kit is available in green.

Length Width Height

25.5 cm 10 cm 14 cm


Saver First Aid Hip Pack 1000GR Code FaHaD-1000GR

The Saver First Aid Hip Pack 1000GR was originally designed to carry airway equipment for lifeguards, but can also be used to carry first-responder supplies or personal gear. This kit is available in green.

Length Width Height

35.5 cm 6.5 cm 5 cm


FAHAD 300GR

FAHAD 200GR

Saver Rescue Trauma Hip Pack 900 Code FaHaD-900GR

The Saver Rescue Trauma Hip Pack 900 is widely used by search and rescue personnel and ski patrollers. It has a surprising amount of storage space and the waist belt straps tuck away when not in use. Available in green.

Length Width Height

36 cm 10 cm 18 cm


12

Emer

genc

y So

ftpa

cks,

Kits

and

Hol

ster

s

13

Saver First Aid Kits Code FaF1672G, FaF1772G, FaF1872G

Ferno First Aid Boxes are not a re-badged fishing or tool box but a purpose-designed medical box for first aid use. Each box comes standard with a locking feature, making the kits tamper-proof if desired. Metal hinges demonstrate the quality of Ferno first aid boxes and are purpose-designed to make the boxes durable. Each box has an over-centre catch and a tongue and groove seal, which provides a tighter seal of the box, making them resistant to things such as dust and water. Another unique feature of the Ferno First Aid Boxes is the removable dividers in the white trays, which allow you to greater customise each compartment. The trays also have a generous depth for greater storage and a smooth surface for easy cleaning.

Length Width Depth Carton Qty

FAF1672G 32 cm 18.5 cm 14 cm 6

FAF1772G 42 cm 22 cm 18.5 cm 4

FAF1872G 45 cm 25 cm 22 cm 4

FAF1272G 25.5 cm 11 cm 4 cm 24

FAF1472G 35.5 cm 14 cm 6 cm 12


Features

• Removable dividers in trays • Deeper trays purpose sized for first aid gear • Tamper-proof lock system • Over-centre catch and tongue and groove sealing • Smooth surface on box lids for labelling • Metal hinges • Resistant to oil and most common chemicals

FAF1472G

FAF1672G FAF1772G FAF1872G

FAF1472G

FAF1272G

FAF1272G

The Ferno 1272 and 1472 first aid boxes are compact, lightweight and ideal for hiking, travelling or driving as they provide simple storage of your first aid equipment in the car, caravan or in your back pack. The Ferno Compact Kits feature a full length hinge and snap lock lid that ensures a tight and secure close.

Ferno Compact First Aid Boxes Codes FaF1272G FaF1472G

12 13

First Aid Containers

Quick connect buckles

Quick connect

Integrated Chest Ascender

The Ferno Hardpoint provides all the comfort and benefits of the standard Centrepoint 2 range however the Ferno Hardpoint replaces the front web belay loop with a hard connection point. For even greater versatility there are an abundance of hard and soft connection points spaced across the waist and back pads to attach additional hardware and gear.

The Ferno Hardpoint Ascender is supplied with most of the features and comforts from the Centrepoint 2 range along with all the benefits found on the standard Hardpoint Full Body Harness. The Hardpoint Ascender also features an integrated chest ascender that provides increased mobility when ascending.

Ferno Hardpoint Ascender Full Body Harness Code VHI HP aSC

Ferno Hardpoint Full Body Harness Code VHI HP

Features

• • Front hard connection point • • Versatile design allows use for a multitude of applications • • Offset (cranked) pole strap attachment points • • Quick connect buckles on waist and legs • • Front and rear free fall arrest D-ring attachment points • • Limited free fall arrest attachment point • • 8 additional conection points for hardware and gear • • Extra wide, padded waist and leg straps for added comfort when

hanging or working for long periods of time

• • Removable moisture wicking 3D mesh back pad provides unrivalled shoulder and neck protection

• • Fully adjustable rear leg risers to ensure best fit • • Australian Standards approved AS/NZS 1891.1:2007

Features (additional)

• • Integrated chest ascender for increased mobility when ascending • • Optional chest harness and backpad available to ensure chest

ascender

Work Positioning Fall Arrest Confined Space Rescue Rope Access

• • • •


• • • •

Ferno Chest Strap Set Code VaI aHCS

Specifically designed for rope access workers utilising the Hardpoint and Centrepoint Harnesses. The Ferno Chest Strap Set prevents the harness front straps and associated hardware pulling away from the chest and body when attached to and hanging from this point. The strap is pre-attached to a back pad, just remove the existing pack pad and replace with this set. The webbing straps can be tightened either over the front chest strap or fed through the front D-ring for extra stabilisation. There are side attachment straps to secure the entire set in place

14

Har

ness

es

15

Ferno Hardpoint Full Body Harness Code VHI HP

Quick connect buckles

Quick connect

Integrated Chest Ascender

The Ferno Centrepoint 2 Full Body Harness is a versatile and comfortable harness that can be used for a multitude of rescue applications.

• Optional Features • • Battery and self rescuer attachment

strap

The Ferno Centrepoint 2 Ascender Full Body Harness is based on our industry renowned Centrepoint 2. As well as being our most versatile and comfortable rescue harness it also features an integrated chest ascender that provides increased mobility when ascending.

Ferno Centrepoint 2 Ascender Full Body Harness Code VHI CEN FB 2 a

Ferno Centrepoint 2 Full Body Harness Code VHI CEN FB 2

Features

• • Versatile design allows use for a multitude of applications • • Offset (cranked) pole strap attachment points • • Confined space retrieval attachment points • • Quick connect buckles on waist and legs • • Front and rear free fall arrest D-ring attachment points • • Limited free fall arrest attachment point • • Gear loops for storing excess hardware and gear • • Extra wide, padded waist and leg straps for added comfort when

hanging or working for long periods of time

• • Removable moisture wicking 3D mesh back pad provides unrivalled shoulder and neck protection

• • Fully adjustable rear leg risers to ensure best fit • • Australian Standards approved AS/NZS 1891.1:2007

Features (additional)

• • Integrated chest ascender for increased mobility when ascending • • Optional chest harness and backpad available to ensure chest

ascender


• • • • •


• • • • •

14 15

Harnesses

Ferno Centrepoint Full Body Harness Code VHI CEN FB (basic), VHI CEN FB CS (con space), VHI CEN FB CS BS (batt strap)

Features

• • Pole strap attachment points • • Front and rear free fall arrest D-ring attachment point • • Limited free fall arrest attachment point • • Rear free fall arrest attachment point • • Extra wide, padded, waist and leg straps for added comfort

when hanging or working for long periods of time

• • Gear loops around the waist for storing excess hardware and gear

• • Fixed, elasticised leg risers • • Australian Standards approved AS/NZS 1891.1:2007 • • Versatile design allows use for a multitude of applications • • Available XS, S, M, L, XL. Conditions apply for XS and XL • Optional Features • • Confined space retrieval attachment points

Features

• • Front free fall arrest attachment points • • Rear free fall arrest D-ring attachment point • • Breathable rear mesh panel keeps the harness in shape

ready for easy donning

• • Multi purpose, general fall arrest harness • • Forged steel sliding buckles for waist, chest and leg

adjustments providing correct and secure fit

• • Australian Standards approved AS/NZS 1891.1:2007 • • Available XS, S, M, L, XL. Conditions apply for XS and XL • • Labelling/screenprinted mesh available - conditions apply • Optional Features • • Pole strap attachment points • • Confined space retrieval attachment points • • Waist belt • • Dorsal extension

Features

• • Lightweight design 1.66 kg, all alloy hardware • • Rear free fall arrest D-ring attachment point • • Quick connect buckles on legs • • Elasticised waist strap ensures comfortable fit • • Attachment points above the waistline to prevent inverting • • Simplistic design and shape allows easy donning • • Australian Standards approved AS/NZS 1891.1:2007 • • Available in one size fits most. Conditions apply for XS and

XL

Ferno Tradesman Full Body Harness Code VHI TRaDE B (Basic), VHI TRaDE CSW (with optional accessories)


• • • •


• •

The Vertical Challenge Full Body Harness was purpose designed forthe changing regulations and safety requirements being implementedinto the Australian outdoor and recreation industry. It’s simple andflexible design allows fitting to a variety of shapes and heights.The Vertical Challenge Full Body uses all alloy hardware and quick connect buckles and weighs in at a very lightweight 1.66 kg.


• • • • •

Vertical Challenge Full Body Code VHS CHaLLENGE FB

Quick connect

16

Har

ness

es

17


• • • • •

Ferno Tower 3 Full Body Harness Code VHI TOW 3

Features

• • Comfortable, padded and stable seat and lumbar support • • Rear dorsal free fall arrest extension strap • • Front free fall arrest attachment points • • Confined space retrieval attachment points • • Reflective, photo luminescent rear pad • • Quick connect adjustable leg buckles • • Rear gear loops • • Stainless steel componentry • • Large, easy access, pole strap attachment points set low to provide

a balanced and comfortable position • • Neoprene covers are supplied on all upper metal buckles for electrical

safety • • The most comfortable and stable harness available for suspended tower

work • • Australian Standards approved AS/NZS 1891.1:2007 • • Available XS, S, M, L, XL. Conditions apply for XS and XL


• • • •

Ferno Tower 2 Full Body Harnesss Code VHI TOW 2

Features

• • Wide, comfortable, padded seat and lumbar support • Large, easy access, pole strap attachment points placed

low to provide a balanced, comfortable position • • Non-metallic rear dorsal free fall arrest extension strap • • Front free fall arrest attachment points • • Neoprene covers are supplied on all upper metal buckles

for electrical safety • • Australian Standards approved AS/NZS 1891.1:2007 • • Available XS, S, M, L, XL. Conditions apply for XS and XL

Quick connect

16 17

Harnesses

1

2

3

1

2

3

Hi-Safe FH17 Full Body Harness Code HS-FH17


• • •

12

3

Hi-Safe FH60 Full Body Harness Code HS-FH60, HS-FH60-L (with lanyard),


• • •

Picture Identifier/Features

1 Front free fall arrest attachment point2 Rear free fall arrest D-ring attachment point3 Breathable rear mesh panel keeps the harness in shape• Colour coded webbing for easier donning• Quick and easy to don and adjust• Fully adjustable, multi size fit• Australian Standards approved AS/NZS 1891.1:2007• Optional permanently attached lanyard also available• Customised labelling available - conditions apply

•



• • •

1

2

3 3

4

Hi-Safe FH50 Full Body HarnessCode HS-FH50, HS-FH50-L (with lanyard),


1 Front free fall arrest attachment point2 Rear free fall arrest D-ring attachment point3 Confined space retrieval attachment points4 Breathable rear mesh panel keeps the harness in shape• Colour coded webbing for easier donning• Quick and easy to don and adjust• Fully adjustable, multi size fit• Australian Standards approved AS/NZS 1891.1:2007• Optional permanently attached lanyard also available• Customised labelling available - conditions apply


1 Front free fall arrest attachment points2 Rear free fall arrest D-ring attachment point3 Thread through, adjustable leg straps• Fully adjustable, multi size fit• Easy to don jacket style design• Australian Standards approved AS/NZS 1891.1:2007• Customised labelling available - conditions apply


1 Front free fall arrest loops with D-ring2 Rear free fall arrest D-ring attachment point3 Thread through, adjustable leg straps• Fully adjustable, multi size fit• Easy to don over the head/jumper design• Australian Standards approved AS/NZS 1891.1:2007• Customised labelling available - conditions apply


• • • •

18

Har

ness

es

19


1

2

3 3

4

1

2

34

5

3

1

1 1

2

23 3

44 4

5 5 5

6

6

6

77

7

7


• • •

Hi-Safe FH17-70 Full Body Harness Code HS-FH17-70

Hi-Safe FH17-40 Full Body Harness Code HS-FH17-40


• • • •

Hi-Safe FH 6 Point Full Body Harness Code HS-FH 6POINT

Hi-Safe FH17-90 Tower Harness Code HS-FH 17-90


• • • •


• • • •


1 Front free fall arrest loops 2 Rear free fall arrest D-ring attachment point3 Side pole strap attachment points4 Thread through, adjustable leg straps• Fully adjustable, multi size fit• Easy to don jacket style design• Australian Standards approved AS/NZS 1891.1:2007• Customised labelling available - conditions apply

•


1 Front waist limited free fall arrest loops2 Front chest free fall arrest loops 3 Rear free fall arrest D-ring attachment point4 Rear free fall arrest extension strap with wrist loop5 Side pole strap attachment points6 Confined space retrieval attachment points7 Thread through, adjustable leg straps• Fully adjustable, multi size fit• Easy to don jacket style design• Australian Standards approved AS/NZS 1891.1:2007


1 Front free fall arrest loops2 Rear free fall arrest D-ring attachment point3 Rear dorsal free fall arrest extension strap 4 Confined space retrieval attachment points5 Side pole strap O-ring and D-ring attachment points6 Padded kidney belt and buttock strap7 Thread through, adjustable leg straps• Easy to don jacket style design• Customised labelling available - conditions apply• Australian Standards approved AS/NZS 1891.1:2007

4


1 Front free fall arrest loops2 Rear free fall arrest D-ring attachment point3 Rear dorsal free fall arrest extension strap

with wrist loop4 Confined space retrieval attachment points5 Thread through, adjustable leg straps• Fully adjustable, multi size fit• Easy to don jacket style design• Australian Standards approved AS/NZS 1891.1:2007• Customised labelling available - conditions apply

18 19

Harnesses

1

2

3

3 4

5 6

1

2

3

3

4

6

1

2

3

4

5

5

1

2

3

4

4

5

66 7

Ferno Arbor Agro Code VaRB aGRO

Ferno Arbor Rite Code VARB RITE

Ferno Arbor Sport Code VaRB SPORT

Ferno Arbor Lite Code VARB LITE


1 Leg pad accepts a removable support bar to reduce fatigue and increase comfort when suspended

2 Wide lumbar pad with semi-rigid shank providing comfortable support

3 Upper D-ring pole strap attachments positioned for comfort and control

4 Rear haul loop ensures secondary lines are clear 5 Lower O-ring accepts replaceable front runner

with twin sliding D-rings6 Adjustable padded leg loops, waist and rear risers • Manufactured in our AS/NZ 1891.1:2007 accredited

manufacturing facility• One size fits all


1 Wide lumbar pad with rigid shank providing comfortable support

2 Single wide leg pad accepts a removable support bar to reduce fatigue and increase comfort when suspended for longer stints

3 Rear haul loop ensures secondary lines are clear4 Upper D-ring pole strap attachments positioned for comfort

and control5 Additional D-rings are located at rear hip for fast attachment of

pole strap or tool attachment6 Lower O-ring with twin D-ring runner7 Adjustable padded leg loops, waist and rear risers

ensure the perfect fit• Australian Standards approved to AS/NZS 1891.1:2007• Available XS, S, M, L, XL. Conditions apply for XS and XL


1 Single, ultra wide seat with individual leg retainers allow freedom of movement while maintaining large surface area comfort

2 Extra wide lumbar pad with 3D mesh for cooling and moisture wicking

3 Rear haul loop to ensure secondary lines are clear during climbing

4 Replaceable twin ring rope runner5 Balanced pole strap attachment points6 4 x metallic gear loops• Manufactured in our AS/NZ 1891.1 accredited

manufacturing facility• Available XS, S, M, L, XL. Conditions apply for XS and XL


1 Wide lumbar pad for added comfort2 Single, ultra wide seat with individual leg retainers

allow freedom of movement while maintaining large surface area comfort

3 Twin pole strap attachment D-rings positioned for balance and control

4 Multiple metallic rear tool loops• Manufactured in our AS/NZ 1891.1 accredited

manufacturing facility• One size fits all

20

Har

ness

es

21

1

1

2

3

4

Ferno Centrepoint Sit HarnessCode VHI CEN SIT (basic), VHI CEN SIT BS (with optional accessories)

Ferno Centrepoint Sit Miner HarnessCode VHI MCEN SIT (steel), VHI MCEN SIT SS (stainless steel)

Bosun’s Chair Code HS BC20

The Bosun’s Chair is ideal for situations where a worker will be suspended for extended periods of time, such as silo cleaning, panel painting and building inspections.

The Bosun’s Chair should be used in conjunction with a complete fall arrest or fall restraint system.

Features

• Large seat area with back support

• Adjustable waist and leg straps

• Adjustable foot rest to avoid leg cramps

• External storage pouch and tool gear loops


1 Pole strap attachment points2 Wide, padded, waist and leg loops for added comfort when

hanging or working for long periods of time3 Gear loops around the waist for storing hardware and gear4 Fully adjustable rear leg risers to ensure best fit

• • Versatile design allows use for a multitude of applications

• • User friendly and lightweight design • • Australian Standards approved to AS/NZS 1891.1:2007 • • Available XS, S, M, L, XL. Conditions apply for XS and XL • Optional Features • • Battery and self rescuer attachment strap • • Flame-proof/anti-static webbing

2

Features

The Centrepoint Sit Miner Harness is a simplified and lighter version of the Centrepoint Sit Harness with reduced waist padding and non-padded, slim-line leg straps. To lighten the harness further, non essential components such as side D rings and gear loops have been removed. The Centrepoint Sit Miner Harness is available with standard steel quick connect buckles or optional stainless steel quick connect buckles.

• Lightweight and easy to don• Australian Standards approved to AS/NZS 1891.1:2007 • • Available XS, S-M, M-L, XL. Conditions apply for XS and

XL

20 21

Harnesses

22

Har

ness

es

23

Vertical Hightop Flying Fox/Swing Harness VHS HIGHTOP

Vertical Edge Harness VHS EDGE DB (double buckle) VHS EDGE (single buckle)

Vertical Challenge Sit Harness VHS CHaLLENGE

Vertical Redpoint Harness VHS RED

Key Features

• Size: One size fits all • Weight: 760 g

Key Features • Size: one size fits most – XS and XL

available on request • Weight: 460 g

Key Features


A full body harness designed specifically to address recent industry regulation changes and requirements involved with challenge rope courses, artificial climbing / abseiling walls, giant swings and flying fox (zipline) applications. It has multiple attachment points, D-rings for separate attachment or for use together. Twin soft tie in seat attachment points. Colour-coded body sections for simplistic fitting, minimise risk and provide instructors with a higher level of certainty especially with large groups.

The Edge Harness is a fully padded adjustable harness ideal for groups of varying sizes. This particular style of sit harness provides a very comfortable sitting position. The floating waistband, with three gear loops, makes it ideal for top-roping, abseiling or lead climbing. An industry standard among the defence forces the Edge Harness is a rugged, universal harness for climbing instruction and corporate clients where greater comfort and padding is required. The Edge Harness comes standard with a double buckle system for added security however it is also available with a (optional) traditional single buckle thread back version.

The Vertical Challenge Sit Harness is specially designed for climbing artificial walls and for adventure parks. It is fitted with one simple tie-in point which is placed above the belt, effectively raising the centre of gravity to avoid inversion. It has adjustable leg loops with stylish alloy double buckles and optional gear loops.

The Vertical Redpoint Harness is our original group use harness and continues to have a significant following due to its lightweight. It has an optional padded band available for comfort. An ideal harness for trekking or mountaineering as well as abseiling.

22 23

Harnesses

Vertical Gym Harness VHS GYM

Vertical Gym Harness VHS GYM

Vertical Grommit Harness VHS GROM

The Vertical Gym Harness is a fully adjustable lightweight harness designed to be easy to don, wear and use. It is especially suitable for gyms, group use and for people starting out in climbing because of its simple and secure buckle system. The waist belt and leg loop buckles are permanently secured so the webbing cannot be unthreaded. Simply pull on the end of the straps to adjust. This makes the Vertical Gym Harness very safe and provides instructors with a higher level of certainty, especially with large groups or inexperienced people who may not be aware of the dangers of failing to double back normal harness buckles. A very popular, simple and hard wearing harness.

The Vertical Bungee Trampoline Harness is designed not only to be safe and comfortable for the user but also to provide the instructor with a quick fit and quick release, allowing a faster turnover of participants.

The Vertical Grommit full body harness is designed for use with small children for either climbing or abseiling. A very uncomplicated design with two adjustment points for simple and easy fitting. The lightweight design and slimline material provides the little tackers with freedom of movement for a full and unrestricted climbing experience. The high attachment points make sure the child cannot invert.

Key Features

• Optional padded band available for comfort • Size: One size fits all • Weight: 490 g

Key Features• Quick-conn ect buckles• Padded waist band• Padded leg straps • Quick adjustment for a one size fits all design

Key Features • Weight 390 g • Two adjustment points • Slimline and lightweight

Key Features


Key Features


Vertical Chest Harness VHS CHEST

The Vertical Chest Harness is only to be used in conjunction with a sit harness. It provides additional support for people with a high centre of gravity or for fixing ascending systems securely to the body. The two soft eyes on the Vertical Chest Harness are designed to connect to the harness belay loop via a hardware connector.

Vertical Chest Harness Extra VHS CHEST EX

The Vertical Chest Harness Extra is only to be used in conjunction with a sit harness. It provides additional support for people with a high centre of gravity or for fixing ascending systems securely to the body. The Vertical Chest Harness Extra is designed to thread through the harness belay loop.

HS-LYS100 steelHS-LYA100 alloy

HS-LYS210EL steelHS-LYA210EL alloy

HS-LYSTT120 steelHS-LYATT120 alloy

Absorber LanyardsLanyards are designed to be the flexible link between a harness and attachment point providing you with the maximum safetypossible. Ferno absorber lanyards are designed to limit the force or shock load sustained in the event of a fall to 6 kN. Ferno offera full range of Australian Standards approved energy absorbing lanyards that provide a solution to any height safety scenarios.Lanyard hardware can be steel or alloy with double action hooks, scaffold hooks, screwgate or triplock karabiners.Special length lanyards can be made to order.

HS-LYSTT110EL steelHS-LYaTT110EL alloy

Hardware Options

Steel Screw gate Karabiner

(VCT A428TOZO)

Steel Small Triplock

Karabiner (VCT A430TVZO)

Alloy Triplock

Karabiner (VCT 4300001)

Alloy Double Action Hook (VCT L3702101)

Steel Large Triplock

Karabiner

Steel Double Action Hook

(VPEN 9652)

Steel Scaffold Hook

(VUSA S-2230)

Alloy Scaffold Hook

(VCT L3536201)

Alloy Screw gate Karabiner

(VCT L4280001)

Harness Assist

The Harness Assist is specifically designed to minimise the effects of suspension trauma. In the event of a fall an adjustable twin foot loop is deployed allowing the user to stand and transfer their weight directly to the anchor point greatly relieving pressure from the harness – one of the major contributing factors to suspension trauma symptoms. The Harness Assist is available in varying options allowing versatility for various users and scenarios. All options are lightweight at approximately 150 g.

Option 1 Harness Upgrade Code “HS-HA”

This option can be retrofitted to any harness and is manually deployed after a fall. It attaches to the rear free fall arrest attachment point of any existing harness and can be purchased separately and retrofitted in the field. It is neatly packaged and concealed within a small, unobtrusive pack which is fitted to the harness close to the user’s chest ready for quick deployment.

Option 2 Harness Integrated Code “HS-FHHA”

This option is integrated into the harness during production and is generally made to order. It is manually deployed ensuring immediate access to the adjustable foot loops. It is supplied in a neat, unobtrusive pack which is fitted to the harness close to the user’s chest ready for quick deployment. (Only available on Hi-Safe Harness range page 4, 5 & 6).

Option 3 Lanyard Integrated Code “HS-LYHA”

A great addition to any lanyard with the secure knowledge that an automatic deployment occurs in the event of a fall. This version of the harness assist is integrated into the lanyard and is generally made to order with many of the lanyard options shown. It is very slim line, light weight and conveniently packaged within the energy absorbing pouch of the lanyard. (Not available on Adjustable Multi-Purpose Lanyards).

Option 2

Option 1

24

Hei

ght S

afet

y So

ftgo

ods

and

Kits

25

Adjustable Multi-Purpose Lanyard Code VaI aDJ Ea FaL

Lanyard Mate HS-LYS aDJ

Rope Absorber Lanyard HS-LY20 SP spliced rope HS-LY20 SK sewn kernmantle

The Adjustable Multi-Purpose Lanyard is a single assembly and is supplied with an alloy ISC rope grab that is EN353 rated. It is simple to inspect, maintain and use and ideal for use in a variety of situations including elevated work platforms and all general work at height scenarios. The durable rope construction in conjunction with a rope grab allows the user to adjust the lanyard length from 60 cm to 200 cm ensuring the perfect length lanyard for each working scenario. For exceptional work purposes the Adjustable Multi-Purpose Lanyard can be supplied in custom lengths exceeding two metres. Australian Standards approved to AS/NZS 1891.1:2007.

The Lanyard Mate is an AS/NZS 1891.1:2007 approved energy absorbing lanyard that is self adjustable from 70 cm to 2 m providing flexible and safe access to the users workplace. It can be supplied with an array of steel or alloy hardware depending on the individuals needs.

A single energy absorbing lanyard with either a 12 mm three strand spliced rope or 11 mm sewn kernmantle rope. These can be supplied with an array of steel or alloy hardware depending on the individuals needs. Australian Standards approved to AS/NZS 1891.1:2007.

Energy Absorber (only)

Code Hardware Selection Length

HS-SA10 Screw Gate Karabiner/Screw Gate Karabiner 60 cm

HS-SA20 D-ring/Screw Gate Karabiner 60 cm

HS-SA30 Double Action Hook/Screw Gate Karabiner 60 cm

HS-SA10

HS-SA20

HS-SA30

In the event of a fall, energy absorbers deploy an additional length of webbing that is designed to absorb the force or shock load experienced.

Wire Absorber Lanyard Code HS-LY80P (karabiner), HS-LY80P-Da (double action hook)

A single plastic coated, galvanised wire rope with an energy absorber. The wire rope is a suitable alternative to webbing when welding or working with cutting tools. Available with screw gate karabiner or double action hook at the energy absorber end. Australian Standards approved to AS/NZS 1891.1:2007.

24 25

Height Safety Softgoods and Kits

Wire Core Pole Strap Code HS-WCPS/3 (3 m) HS-WCPS/4 (4 m)

Adjustable Rope Lanyard 2 m Code HS-LY200CD

Hi-Safe Non Adjustable Lanyards

Code Style Hardware Selection Length

HS-LY600R Rope Lanyard Screw Gate Karabiner/Screw Gate Karabiner 60 cm

HS-LY600W Web Lanyard Double Action Hook/Screw Gate Karabiner 60 cm

HS-LY200R Rope Lanyard Screw Gate Karabiner/Screw Gate Karabiner 2 m

HS-LY200W Web Lanyard Double Action Hook/Screw Gate Karabiner 2 m

A rope positioning system with 2 m of adjustment by means of a stainless steel double jawed rope adjuster. Supplied complete with an attached steel screw gate karabiner to secure to an anchor point of harness.

To be used in situations of restraint where there is no risk of a free fall. Refer to AS NZS 1891.1:2007 or a Registered Training Organisation.

Made of cut resistant steel wire with a double braid cover and supplied complete with a stainless steel rope adjuster, steel screw gate karabiner and steel double action hook. These lanyards are ideal for use when welding or using cutting tools. Available in 3 m or 4 m lengths.

HS-LY600W

HS-LY600R

HS-LY200R

Hi-Safe Non-Adjustable Lanyards are available in rope or webbing and are used as an extension or to secure workers in restraint only. Energy Absorbers are not available on these products.

Hi-Safe Non-Adjustable Lanyards are available in 2 m lengths in either rope or webbing. To be used in situations of restraint only where there is no risk of a free fall. Energy Absorbers are not available on these products. An understanding of working in restraint is essential for the safe use of these products. Refer to AS NZS 1891.1: 2007 or a Registered Training Organisation.

Ferno Pole Strap Code VaI POLE EN2 NZ

AS/NZS 1891.1:2007 approved pole strap is available in various lengths from 1.9 m to 5 m depending on the user’s individual circumstances. It is supplied standard with two double action alloy hooks. Also available with steel or alloy karabiners (screw gate or triplock). Supplied standard with either a durable leather sleeve or a webbing protective sheath. An optional D-ring can be supplied as an attachment point for hanging tools and gear up to 50 kg.

• AS/NZS 1891.1:2007 standards approved • Available in various lengths from 1.9 m to 5 m • Available in an array of hardware connection points • Buckle adjustment is offset from attachment point for easy adjustment • Supplied standard with either a durable leather sleeve or a webbing protective sheath

Optional D-ring

26

Hei

ght S

afet

y So

ftgo

ods

and

Kits

27

Designed by industry professionals and tested in the field to meet the day to day requirements of roof workers. All components have been carefully selected for durability and quality ensuring longevity of service.

Specifically constructed for use on all metal roofs. All components have been selected for durability and quality ensuring longevity of service.

The Tower Workers Kit contains everything necessary for working on top of towers, electrical poles and pylons.

Roofers Kit Code HS-DL16B (with FH17), HS-DL-3T (with FH60)

Metal Workers Roof Kit Code HS-DLMR

Kit Contents Qty

Hi-Safe FH17 Full Body Harness

or

Hi-Safe FH60 Full Body Harness

1

Rope adjuster with karabiner 1

15 m of 11 mm kernmantle rope with sewn double action hook

1

Personal energy absorber 1

2 m tie-off adapter 1

All purpose grab bag 1

Kit Contents Qty

Hi-Safe FH17 Full Body Harness 1

Rope adjuster with karabiner 1

15 m rope with double action hook 1

Personal energy absorber 1

2 m tie-off adapter 1

ROOFlok Temporary Anchor System 1


Tower Workers Kit Code VKIT TOWER

Kit Contents Qty

Ferno Tower 2 Full Body Harness 1

Sling - round 25 mm x 1500 mm 1

Sling - round 25 mm x 1200 mm 1

Pole strap 4 m 1

Single elasticised absorber lanyard 1.6 m 1

Steel triplock karabiner 2


26 27


The Pole Top Rescue Kit is supplied complete with all equipment necessary to complete rescues during electrical pole work. Conforms to many electrical authorities requirements. Note: electrical gauntlets not provided.

The Tower Rescue Kit contains the essential equipment required for the retrieval and rescue of personnel on tower structures.

The EPV Exodus Kit is a self-contained escape kit that is ideal for workers on overhead cranes, elevated platforms and rescue teams. Attached to a permanent fixture the unit is deployed in the event of an emergency and operators descend using a simple pre-rigged control descent device. Mounting plate kit available separately.

Pole Top Rescue Kit Code VKIT POLE aS

Kit Contents Qty

Weather proof fiberglass container with instructions

1

33 m blue rope with hard eye end 1

Alloy double action hooks 2

Pole Belt 1

Pole strap with D-ring 1

Tool pouch 1

Cable cutters 1

Knife, blunt nose 1

Ferno Tower Rescue Kit Code VKIT-FTRK

Kit Contents Qty

Storage backpack yellow 1

65 m rope with sewn eye & triplock karabiner

1

FDU100 Rescue Descender with triplock karabiner

1

50 mm x 1200 mm anchor sling 1

25 mm x 1200 mm round sling 1

Rescue knife with extender and 2 alloy triplock karabiner

1

Mechanical advantage retrieval system 1

Cervical collar (optional) 1

Kit Contents Qty

11 mm rope as required*

2 tonne shackle 1

Exodus escape device 1

Steel screw gate karabiner 1

Fibreglass weather resistant case 1

EPV Exodus Kit Code HS-RE20/16 (16 m rope), HS-RE20/25 (25 m rope)

28

Hei

ght S

afet

y So

ftgo

ods

and

Kits

29

Ferno Slings Codes VSL R32kN (25 mm round), VSL S80kN (50 mm heavy-duty flat snake) and VSL S30kN (50 mm flat snake

Girth Hitch Sling Code Vsl G30kN

Tie-Off Adapters Code HS-aC1000, HS-aC2000

Hi-Safe Tie-Off Sling With D-rings Code HS-aC10 (1 m), HS-aC20 (2 m)

Every Ferno Sling is made from high grade, abrasion resistant webbing and is available in a variety of colours and lengths. The different styles provide the user with the option to wrap the sling in a single, double or triple style or tie end to end making them a versatile and handy adjunct for forming temporary anchor points. Manufactured in accordance to AS/NZS 1891.

25 mm Round Sling

50 mm Flat Snake Sling

50 mm Heavy-duty Flat Snake Sling

The Girth Hitch Sling differs significantly in design and performance from other adjustable anchor straps, allowing it to handle a higher load before slipping. The D-ring on one side is larger than the other, so the other end can pass through, allowing the straps to be rigged in a girth hitch. Available in lengths from 30 cm to 2.5 m

Available in one and 2 tonne holding capacity. Manufactured from very low stretch material with a soft finish to protect painted surfaces.

Made from high grade, abrasion resistant webbing. Available in safety orange with two convenient D-rings permanently attached. A universal sling tie-off and for forming temporary anchor points.

AC1000 1 m AC2000 2 m

Etrier and Aider Four and Five Step Code Vas ETRIER 4 & 5 and Vas aIDER 4 & 5

The Etrier and Aider Four and Five Step are ideal for rescue, rope access and recreational aid climbing. The 25 mm flat polyester webbing and dense vinyl stiffening ribs remain rigid for years, ensuring ease of foot placement and superior abrasion resistance.

Aider

28 29


Ferno Rescue Personal Lanyard (PAL) Code Vas DaISY aDJ

Ferno Industrial Daisy Chain Code Vai DaISY H/D BLK

The Ferno Rescue Personal Lanyard allows a rescuer to quickly connect to a victim and then adjust the strap to the desired length. It works well for positioning the victim for a lowering or rappel-based pick off or for an assisted rappel. There is an added loop to the end for a more positive grip when pulling to adjust. Depending on how the buckle is loaded, it will begin to slip between 15 kN to 20 kN. Tying off the buckle will increase strength.

The Ferno Industrial Daisy Chain is ideal for positioning the casualty during work operations and is a must for all Rope Access and Rescue Technicians. A total length of 1.1 m with an end to end rating between 15 kN to 20 kN (load angle dependent). Each unit comes with 10 x 60 mm attachment loops and is made from durable 25 mm flat polyester web. Each loop rated to 5 kN.

Rope Savers

Ferno Rope Savers are available in a variety of sizes and include two different sized steel rings connected to heavy-duty, industrial rated polyester webbing. Ferno Rope Savers minimise damage to the tree and provide consistent friction on the climbing rope.

• (1) VARB RS1500 - Rope Saver 1500 mm Red • (2) VARB RS1800 - Rope Saver 1800 mm Fluoro Yellow • (3) VARB RS900 - Rope Saver 900 mm Red • (4) VARB RS1200 - Rope Saver 1200 mm Blue • (5) VARB RS600 - Rope Saver 600 mm Fluoro Yellow

Throw Bags Code VaRB TB 250, 250 D (Dipped), 400 and 400 D (Dipped)

These hard wearing, rip resistant throw bags are filled with either 250 g or 400 g of lead shot. Each Throw Bag includes a 2.5 cm steel ring for attachment to throwing line. Also available with white heavy-duty rubber dip for increased wear resistance and longer life as well as offering greater visibility (colour may very from shown).

(1)

(2)

(3)

(5) (4)

The Ferno Shotbag consists of a dipped throw bag attached to 30 m of cord all housed in a convenient throw bag.

Ferno ShotbagVKIT THROW BaG

30

Hei

ght S

afet

y So

ftgo

ods

and

Kits

31

(1)

(2)

(3)

(1)

(2)(3)

(4)(5)

Tool StropsFerno offer a range of standard tool strops (also known as tool lanyards) as well as elasticised and tearaway versions. The tearaway strop is constructed with a tearaway safety strap that is designed to absorb the force or shock load of a chainsaw or heavy tool fall. The safety strap will begin to tear when approximately 30 kg or greater of force is applied. It is also available in an elasticised version that reduces the length of the strop when not under load and to minimise entanglement in the work area.

Standard and Elasticised

• (1) VARB TS 900 - Tool Strop Basic 900 mm Blue • (2) VARB TS 1200 - Tool Strop Basic 1200 mm Red • (3) VARB TS 900 EL - Tool Strop Basic Elastic 900 mm Blue • (4) VARB TS 2LL - Tool Strop 2 Loop 1200 mm Red • (5) VARB TS MINI - Tool Strop Basic Mini Blue

• (1) VARB TS T/A 1200 - Tool Strop Tearaway 1200 mm Red • (2) VARB TS T/A 900 - Tool Strop Tearaway 900 mm Blue • (3) VARB TS T/A EL - Tool Strop Tearaway Elastic 1200 mm Red

Tearaway: Standard and Elasticised

Tool Frog Set Code VaI FROGS

The Ferno Tool Frog have a universal design to allow an array of rope access or building tools to be carried on your harness. They attach to any standard harness webbing waist belt and securely attached via oversized hook and loop web. The design incorporates a large back pad that prevents tools clashing with the harness or user. The Ferno Tool Frog come supplied as a pair.

Tool Wrist Loops Code HS-WL10, HS-WL15

The Tool Wrist Loops reduce the risk of dropped tools and equipment. They are lightweight, flexible and comfortable to wear and have been developed to secure hand tools and other equipment in situations where work must be carried out over other workers or public spaces. Approximately 300 mm in length to end of string once attached to wrist.

• Cord loop• Adjustable wrist band• Washable

• Metal snap clip• Swivel hook• Adjustable wrist band

HS-WL10 HS-WL15

Spike Pads Code VaRB TSP (T-Spike), Code VaRB OSP (Oval Spike)

Tough, pliable black leather with a soft padded inner felt. Large 40 mm thread holes provide easy strap point adjustability for a comfortable fit.

Fits over your helmet and extends beyond the rim to block 100% of UV ray and to stop glare and sun from your face, ears and the back of your neck. Made of durable, cordura nylon, the Sunbrero has an elastic band that grips to the Skylotec helmets and secures to the headlamp retainer clips.

The Vertical Sunbrero VaS SUNBRERO

30 31


Code Product Detail

HS-SL (+ length in m) 3 strand with double action hook

HS-SL (+ length in m) K 3 strand with screw gate karabiner

HS-NARROPLAN H (+ length in m) Kernmantle with double action hook

HS-NARROPLAN K (+ length in m) Kernmantle with screw gate karabiner

HS-NAR ROP LAN (+ length in m) Kernmantle rope only

Rope Safety Lines

Hi-Safe Rope Safety Lines are available in either a 12 mm three strand spliced rope or 11 mm sewn end kernmantle rope in a variety of lengths. All safety lines are finished with a thimble eye and can be supplied with an array of hardware options or supplied with thimble only . Either rope has a break force in excess of 25 kN.

Note other lengths and end fittings on request.

Rope ProtectorsFerno provide various styles of rope protectors that prevent rope damage on sharp, abrasive or dirty edges and help prolong the life of your rope and slings. They are available in heavy-duty, flat or in a lighter duty wraparound. Ferno’s Rope Protectors provide ideal protection for your ropes and slings.

(1)

(3)

(2)

• (1) VAS ROP PROT - Light duty • (2) VAI ROP PROT IND FLAT - Flat • (3) VAI ROP PROT IND WRAP - Wraparound

Ferno Rope and Harness Wash Code VaS WaSH (500 ml bottle) and VaS WaSH 20 (20 L container)

A highly concentrated, blue liquid that is recommended for use with industrial harnesses, access, rigging and lowering ropes. Ferno Rope and Harness Wash is environmentally friendly, bio-degradable and does not contain any phosphates, bleaches or fragrances. It is low foaming, free rinsing with excellent soil removal properties. Available in a 500 mL bottle or 20 L bulk container.

Rope Finishing

Ferno can manufacture rope components to individual specifications including splicing of both standard and double braid synthetic rope along with quality sewing of kernmantle rope with an array of plastic, stainless steel and galvanised steel thimble fittings to ensure a perfect custom solution.

32

Rope

and

Rop

e Ca

re P

rodu

cts

33

Small Gear Bag Code VaRB GB

A universal, heavy-duty Cordura bag with robust handle and draw-string top. Self supporting but still capable of collapsing for storage.

Dimensions: L 150 mm, W 150 mm, D 150 mm

Ferno Rope Bags Code VBS HIVIS (Heavy-Duty), VBS ROP BaG (Standard)

Multi Pouch Code VRES MULTI POUCH

Expedition II Duffel Bag Code VBS EXP 2 HD

Ferno Haul Bag Code VBS HaUL 200 (cordura), VBI HaUL IND (leather)

All Purpose Grab Bag Code VBI CaRRY

The Ferno Heavy-duty Rope Bag keeps your rope conveniently stowed, ready for transportation and quick deployment. It comes with a carry handle, backpack straps, pull tight throat closure and is made from 1000 denier vinyl. Available in 50 m, 100 m, 150 m and 200 m sizes.

The Standard Rope Bag is available in 50 m, 100 m, 150 m and 200 m sizes and is made from 1000 denier cordura. This version comes complete with a single shoulder strap only.

The Multi Pouch is an ideal bag for the convenient storage of all rope and rescue gear. The clear faced pouches provide an uninterrupted view of all equipment, assisting in quick identification and deployment. The Multi Pouch is made from tough 1000 denier nylon. Each Multi Pouch features integral carry handle and backpack straps. The Multi Pouch has been a favourite with emergency services personnel for many years.

The Expedition II Duffle Bag is a sizeable bag with a 75 L capacity that is made tough to carry rescue, industrial or climbing gear. This bag is made from 1680 denier nylon with integral shoulder and carry straps and is a favourite from our outdoor range.

Dimensions: L 750 mm x W 300 mm x H 200 mm

The Ferno Haul Bag is a tough, hard wearing bag that has a safe working load of 50 kg with a 5:1 safety factor and an impressive 90 L gear capacity. It includes oversized easy to attach haul loops and heavy duty back pack straps. The bag also features two separate pull tight draw strings to secure its load as well a four D-rings around the base for stabilising the load during long distance hauling. Available in either leather or 1680 cordura.

This multi-purpose bag is ideal and large enough for storing your harness and all related gear to make up your own kit. A handy daisy chain is located inside the zipper opening for convenient storage of karabiners and other gear. Available in a variety of colours: maroon, black, red, yellow and blue.

Dimensions: L 580 mm x D 300 mm

Ferno Heavy-duty Rope Bag

Ferno Standard Rope Bag

Bag Height Depth

50 m 560 mm 240 mm

100 m 700 mm 240 mm

Bag Height Depth

150 m 680 mm 300 mm

200 m 850 mm 300 mm

32 33

Bags and Climbing A

ccessories

Vertical Prusik Stirrups - AdjustableVaS PRUSS aDJ

A great aid for rope climbing, the adjustable Prusik Stirrups minimise the effort expended when climbing or positioning while on rope.

Vertical Daisy Chain VaS DaISY

This Daisy Chain features 22 mm nylon tube with 12 loops. • Rated to 15 kN overall and each loop rated to 5 kN • Weight 113 g • Length: 1200 mm

Gear Sling – AdjustableVaS GEaR SL aDJ

As used by Rambo…just kidding. A padded and adjustable sling for optimal gear placement or when extra supplies are required for that long day out.

Vertical Chalk BagsCH BaG

Excellent for bouldering and long cragging sessions. This professionally finished bag will nest heaps of chalk. It has an exquisite fleece lining with a simple draw string closure and mandatory attachment loop. Available in a variety of colours.

Chalk Bag BeltVaS CH BELT

It doesn’t get much simpler than this. A super light, nylon web belt that features a slimline adjustable snap buckle. And is a perfect addition when there is nowhere to hang your chalk bag.

Ponderosa BagpackVBS POND

A great little bagpack that allows you to carry and sort your essential climbing gear. Included as an integral part of the Ponderosa is a large ground sheet to keep your rope and gear clean and dry. A pull tight draw string holds your gear together along with an additional web strap. It also has two bagpack straps so you can be hands free to carry other gear.

34

Bags

and

Clim

bing

Acc

esso

ries

35

Saint LanyardVaI LaN Y

A simple twin tailed lanyard with without energy shock absorber for specific use on high ropes courses where only a limited free fall can occur.

Berry SR2 LanyardVaI BERRY SR2

A twin tailed lanyard with integral energy shock absorber for specific use on high ropes courses. It is designed with two hook back loops for placement of unwanted double action hook. Suitable for instructor use only.

Berry LanyardVaI BERRY

A twin tailed lanyard with integral energy shock absorber for specific use on high ropes courses.

Vertical Floor Belay Station SlingVaS BELaY SL

Reinforced ends with a protective layer for long gym life.Adjustable to 1200 mm. Rated to 16kN.

Vertical Neat SeatVaS NEaT S

Climbing rock is sick but sitting on it for hours is pain. The Neat Seat is a padded, lightweight seat that is a fantastic adjunct to your climbing gear. Made from durable nylon with adjustable stays. Folds flat and inconspicuous for inclusion on any trip.

34 35

Bags and Climbing A

ccessories

Ferno ROOFlok™ Temporary Anchor System*The Ferno ROOFlok is lightweight and compact allowing it to be moved from job to job, it is easy to attach to most roofs using the supplied screws and rivets. The ROOFlok is supplied with the ANCHORsafe Shock Limiter, a 360 degree swivel attachment device that provides the user with uninterrupted access to their work area. The ANCHORsafe also absorbs the force or shock load sustained in the event of a fall.

• Supplied with ANCHORsafe Shock Limiter• Swivels 360 degree for uninterrupted access• Absorbs the shock load in the event of a fall• Easy to attach using supplied screws and rivets• Can be moved from job to job• Lightweight and compact• Stainless steel construction for durability• Rated at 15 kN “Fall Arrest” for single person use• Meets the requirements of AS/NZS1891.4

Ferno EDGElok ™ Temporary Anchor *

Ferno SURFACElok™ Permanent Anchor* The Ferno SURFACElok™ is a unique and versatile anchor system made from stainless steel for durability, longevity and aesthetic appeal. It’s unique design incorporates a myriad of fastening holes making it compatible with most roof profiles and structures. The Ferno SURFACElok is supplied with the ANCHORsafe Shock Limiter, a 360 degree swivel attachment device that provides the user with uninterrupted access to their work area. The ANCHORsafe also absorbs the force or shock load sustained in the event of a fall. Each SURFACElok Anchor is supplied with an individually numbered, anodised alloy, tamper evident tag that provides for annual inspection details to be recorded.

• Supplied with ANCHORsafe Shock Limiter• Swivels 360 degree for uninterrupted access• Absorbs the shock load in the event of a fall• Compatible for most roof profiles and structures• Tamper evident, inspection tag with serial number• Quick and easy installation process• Supplied with tek screws, rivets and sealing tape• Stainless steel construction for durability• Aesthetically pleasing design and appearance• Meets the requirements of AS/NZS1891.4• Rated at 22 kN fall arrest for two person use

*Must be used with a personal energy absorber and lanyard system. Any roof structure must be inspected by a competent person and deemed strong enough to yield the required forces prior to application. If in doubt consult an engineer for clarification.

The unique design of the Ferno EDGElok anchor allows multi-depth adjustment to suit varying roof cladding profiles. The EDGElok is robust yet light-weight and collapsible so it can be carried from job to job for repeated use. For additional safety the EDGElok incorporates an energy absorbing arm with fall indicator. The EDGElok has an all steel construction and finished in high visibility safety red. It is tested to meet the requirements of the AS/NZS1891.4 anchorage specifications for 15 kN single person fall arrest.

• Multi depth adjustment to suit varying roof cladding profiles• Light weight and collapsible• Easily transported from job to job for repeated use• Incorporates an energy absorbing arm with fall indicator• Finished in high visibility safety red all steel construction• Meet the requirements of the AS/NZS1891.4• Rated at 15 kN fall arrest for single person use

36

Roof

Anc

hors

& B

rack

ets

37

Ferno PURLINlok™ Permanent Anchor* Code FWE-PL CORR (corrugated) FWE-PL TRIM (trim deck) FWE-PL FLaT (flat) FWE-PL FLaT flat roof

The Ferno PURLINlok™ Roof Anchor range is available with a suite of base plates providing the user with an easy to install, permanently mounted anchor system for most roof structures. The Ferno PURLINlok is supplied with the ANCHORsafe Shock Limiter, a 360 degree swivel attachment device that provides the user with uninterrupted access to their work area. The ANCHORsafe also absorbs the force or shock load sustained in the event of a fall. Each PURLINlok Anchor is supplied with an individually numbered, anodised alloy, tamper evident tag that provides for annual inspection details to be recorded.

• Supplied with ANCHORsafe Shock Limiter• Swivels 360 degree for uninterrupted access• Absorbs the shock load in the event of a fall• Variety of base plates for most roof structures• Tamper evident, inspection tag with serial number• Quick and easy installation process• Supplied with sealing tape, purlin setting block and string applicator• Stainless steel construction for durability and longevity• Meets the requirements of AS/NZS1891.4

Hi-Safe RA10 Permanent Anchor* Code HS-Ra10 CORR (corrugated) , HS-Ra10 TRIM (trim deck), HS-Ra10 FLaT (flat )

The Hi-Safe RA10 Anchor range is available in an array of base plates providing the user with an easy to install, permanentlymounted anchor system for most roof structures. The anchor attachment point sits high and proud providing the user with good clearance options. Each Hi-Safe RA10 Anchor is supplied with an individually numbered, anodised alloy, tamper evident tag that provides for annual inspection details to be recorded.

• Supplied with tamper evident• Inspection tag with serial number• Full stainless steel construction• M12 eye bolt 120 mm• Easy installation• Supplied with purlin setting block and string applicator• Meets AS/NZS1891.4 anchorage requirements

• Rated at 22 kN fall arrest for two person use

Hi-Safe RA45 Permanent Anchor* Code HS-Ra45

For tile, slate or metal roof structures with timber purlins with access fromthe underside. Each Anchor is supplied with an individually numbered,anodised alloy, tamper evident tag that provides for annual inspectiondetails to be recorded.

• Supplied with tamper evident, alloy inspection tag with serial number• Access for fitting is from below roof line• Includes two galvinised purlin brace, all thread, hardware and anchor• Meets the requirements of AS/NZS1891.4• Rated at 22 kN fall arrest for two person use

36 37

Roof Anchors &

Brackets

Climb Safe Ladder System Code HS-CS

This complete system is designed for providing safety when ascending or descending ladders. A worker attaches their body harness to the cable via a cable adjuster with shock absorbing lanyard (HS-CS1000 sold separately). They can then move freely up and down the ladder system with both hands free.

The system is mounted as a permanent fixture with the use of a top mounted bracket with energy absorber and bottom mounted bracket with a cable tension system. The ladder system is also supplied with flexible 8 mm steel cable. The ladder system is supplied ready for installation and is supplied with instructions.

Cable guide to reduce lateral movement (supplied on systems 15 m or longer)

Cable tension systemTop mounted bracket with energy absorber

Cable Adjuster for Ladder System Code HS-CS1000

The HS-CS1000 is the recommended adjuster for the above ladder system. It comes complete with built-in energy absorber, two steel screw gate karabiners and stainless steel cable adjuster. The adjuster can be removed from the cable allowing use on other ladder systems but remains locked when the karabiner is in place. Sold separately to ladder system.

Hi-Safe Ladder Lock Code HS-LLO (parapet), HS-LLO G (gutter)

Hi-Safe Ladder Locks are available for either guttered roofs or parapet building structures. They can be securely fastened and are an ideal alternative to permanent ladder systems. A 1 metre handrail provides stability when transitioning from ladder to roof which is the most critical point in portable ladder egress and regress. Complies with relevant Australian Standards and guidelines.

Hi-Safe LS25 Ladder Bracket Parapet Code HS-LS25

Hi-Safe LS25 Ladder Bracket Gutter Code HS-LS25G

The Hi-Safe LS25 Ladder Bracket Parapet provides a simple and secure ladder mount preventing ladders slipping from parapet type structures. The design also allows ladders to be tied off for increased safety and security.

The Hi-Safe LS25 Ladder Bracket Gutter provides a simple and secure ladder mount preventing ladders slipping from most structures with exterior gutters. The gutter version is supplied with adjustable stays that provide flexibility when fitting to various roof styles. The design allows ladders to be tied off for increased safety and security.

38

Roof

Anc

hors

& B

rack

ets

39

Hi-Safe Tripod Code HS-TP10

Hi-Safe Rescue Winch Code HS-RW20T (tripod), HS-RW20D (davit)

A simple, heavy duty tripod developed by industry professionals with years of field experience.

Optional Hi-Safe Rescue Pulley System

The rescue winch has been developed to be attached to either the Hi-Safe Tripod or Davit System. The Rescue Winch utilises a Weston Brake System with steel gears, back up brake and is supplied with 20 m of cable. It works on a basic wind up, wind down principle. The Hi-Safe Rescue Winch is rated at 180 kg with a 7:1 safety factor. Developed for one person working or for two persons rescue. Comes complete with a re-direct pulley. Weight: 7 kg

Key Features

• Compact head frame reduces weight and size • Independently adjustable spring loaded legs minimise

the risk of accidental closure. • Galvanised steel construction • 2.3 m head clearance • 2.2 m foot print (at full extension) • Single swivel bolt attachment point • Supplied with foot tether • SWL 180 kg with 7:1 safety factor • Rated 2 person rescue - 1 person working

Hi-Safe Davit System Codes HS-DaV SYS (complete system), HS-DaV B (Davit Base) and HS-DaV a (Davit arm and body)

Key Features

• Durable galvinised steel construction • Simple to install and one man portable • Collapsible design • Individual bases can be installed at various work locations

allowing a single davit arm to be used in various locations • 34 kg arm and body • 14 kg base - dimension: 300 mm2

• SWL 180 kg with 8:1 safety factor

The complete Davit System is an ideal solution for scenarios lacking overhead anchor points or areas that cannot be straddled by a tripod.

Optional Hi-Safe Rescue Pulley System

Optional Rescue Winch

Davit arm nested in body

850

1610

18002000

500

Hi-Safe Tripod Bag Code HS-TP CaRRY BaG

A purpose made bag for the Hi-Safe Tripod. This bag is made from 1680 black cordura and has a full length zipper, reinforced ends, two carry straps and a full length shoulder strap with padding.

38 39

Edge Managem

ent, Rescue & Escape

The Ferno Arachnipod is the world’s most versatile modular total edge management system (TEMS). Components can be added or removed as required so that the Arachnipod complements existing structural or natural features. The unique design of the patent-pending modular head means the Arachnipod can be constructed into many different configurations including a ginpole/monopole, bipod, tripod, quadpod, bridge system and handrail recovery monopole.

For heavy loads, four legs can used to form a quadpod and increase the safe working load (SWL). Its versatility makes it an ideal system for workers in industries such as rescue and emergency services, construction, military, utility services, mining, film and maintenance.

Configurations

Gin Pole/Monopole

A-Frame with Lazy Leg and reverse head

Handrail Recovery Monopole

Quadpod

Tripod

Tripod as High Directional System Bridge System

A-Frame

Sideways A-Frame using pulley head

40

Edge

Man

agem

ent,

Resc

ue &

Esc

ape

41

How It Works

Accessories

Arachnipod Kits

Product Contents Arachnipod Kits

Arachnipod Industrial

Industrial Plus

Arachnipod Rescue

Rescue Plus

Arachnipod TEMS

Basic tripod (without pulley) 1

Tripod (with pulley head) 1 1 1 1

Foot rope & rope grab 1 1 1 1 1

Arachnipod bag 1 1 1

Rigging plate 1

Spike feet 3

Lazy leg kit inc. Reverse head & bag 1 1

Full accessory kit 1 1

2 m bridge kit 1

Standard foot Hold-down stake Spike foot Soft ground shoe

Gin headWinch and mount

Reverse headQuad plate

Arachnipod step

Equipment bracket

Rigging plate

The modular design of the Arachnipod offers customers the option to purchase a basic unit and upgrade to make a more advanced system. Minimal space is needed to store an Arachnipod as it flat packs for simple and convenient storage. There are five kits available for purchase, ranging from the basic tripod through to a total edge management system (TEMS).

Accessory kit

* Bridge kit includes extra leg, bag and foot rope

Optional extras

3 m bridge kit

4 m bridge kit

Bridge kit stainless steel upgrade kit

Additional standard leg

Additional pulley leg

Gin head

Lazy leg extension kit

10 m winch and mount (6 mm cable)

20 m winch and mount (6 mm cable)

Type 3 fall arrest block and mount

Lazy leg extender kit Type 3 fall arrest block with mount bracket

Full Accessory Kit Contents Qty

Accessory bag 1

Spike feet 4

Gin head 1

Soft ground shoes 4

Hold-down stakes 4

M12 Tru-bolts 8

M12 masonry drill bit 2

Spare Qik-link head pins 2

Spare detent pins 2

Spare leg pin with detent pin 1

Steps 2

Equipment bracket 1

Rigging plate 1

Quad plate (shapekeeper) 1

The Arachnipod, in its most basic form, is a simple tripod with the three legs independently pivoting from an anodised aluminium head. The modular head has a similar design to a door hinge. Inserting or removing a pin through the centre of the head allows the quick and simple addition or removal of components to create a configuration to suit any edge management scenario. Each head section contains a shackle for guying while an optional in-built twin grooved stainless steel pulley is also available.

40 41

Edge Managem


Hi-Safe Rescue Pulley System Code FWE-CSRK (bag), FWE-CSRD (drum)

Res-Q-Link Recovery Pole Code FWE2090

Developed for backup and rescue situations the Hi-Safe Rescue Pulley System has a 4:1 lift advantage and a built-in lift and lock system which can be manually overridden. It comes standard with a tie off adapter and 50 m of rope allowing approximately 12 m of lift. Supplied standard with a heavy duty rope bag, also available with optional dust proof stowage drum.

Optional drum

The Res-Q-Link is a unique and multi functional rescue pole incorporating many features and benefits including: • Large alloy double action hook compatible with most recovery systems and allowing

two configurations to provide versatility when rescuing a fall victim • Extendable from 150 cm to 280 cm. • Fibreglass outer pole and rubber coated handle for maximum grip and control in

long reach scenarios. • Torch holder for low light scenarios which is compatible with most

slim line torches • Rope and web cutting knife to cut victim free once a recovery system is attached. • Additional double action hook available (Code VCT L3536201)

Large alloy hook with torch and torch holder (torch not supplied) Large alloy hook with web cutting knife

Large alloy hook, knife in stored position

Ferno Mini Haul Kit Code VKIT MINI HaUL

The Ferno Mini Haul kit is an extremely compact haul kit that will provide a 6:1 mechanical advantage. It features a V-shaped cleat that if required, enables the operator to lock off the system during a hauling operation. The Ferno Mini Haul Kit is rated for one person rescue only.

42

Edge

Man

agem

ent,

Resc

ue &

Esc

ape

43

Ferno FDU Code FWE-FDU 100 (with friction rack) FWE-FDU 200 (without friction rack)

The new Ferno FDU is designed for personal rescue, emergency escape, rescue operations or specialised rope work. It is a friction control, double stop, descending system, with a simple and soft moulded, operator handle. The system starts releasing its load when the handle is moved towards the central position. Should a panic grab take place and the handle is pulled past the central position, the system locks up into the double stop mode.

This mode will only be maintained with the force exerted by the operator, until a gentle release takes place. If the handle is let go, the system automatically locks. For rescue loads (2 persons) the Ferno FDU is available with an additional friction rack. The Ferno FDU has been extensively tested with Donaghys 11 mm Rescue Response Static Rope and Donaghys 11 mm Response XT Rope and when used with either of these ropes will conform to AS/NZS 4488.1:1997.

FDU100

FDU200

Dimensions taken with handle in stored position

Length Width Depth Weight

FDU100 250 mm 135 mm 45 mm 950 g

FDU200 250 mm 135 mm 45 mm 730 g

Rope Length Width Depth Weight

11 mm - 13 mm 180 mm 120 mm 47 mm 950 g

OG1 Prusik Minding Pulley Code FWEOG1

The OG1 Prusik Minding Pulley has an impressive 36 kN load rating, however itsdistinctive feature is the combination of a side opening plate with a uniquestainless steel gate that allows you to access the sheave without having todisconnect the pulley from its anchor or karabiner. The OG1 Pulley canaccommodate up to three 12 mm karabiners at its connection point.Researched and developed by our team in Australia, the Versa-OG1 Pulley is aninvaluable aid for any heavy duty industrial rigging or rescue operations. Made from high grade anodized aluminium and stainless steel. Sheave size: 51 mm x 13 mm..

Rope Length Width Depth Weight

11 mm - 12 mm 160 mm 79 mm 29 mm 450 g*

Exodus Escape Device Code HS-RE20

Forming the heart of the EPV kit this incredibly simple unit can be used for descent and belaying. Constructed from premium quality aircraft grade aluminium and tested in excess of 15 kN. Supplied with steel screw gate karabiner.

*weight without karabiner

© Ferno Australia Pty Ltd 2010

All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means without the prior written consent of Ferno Australia. Whilst every care has been taken to prevent printing errors, colours and reproduction is subject to the usual tolerances of the printing process. Specifications may be changed in line with current legislations and standards E&OE.

Care of this equipment

Always inspect your equipment before use for any signs of wear and tear. If in doubt retire the item. Our products are susceptible to abraison, corrosive chemicals and UV degradation. When stitching becomes frayed or damaged it should be retired or repaired. Wash periodically in luke warm water and mild detergent. Air dry away from direct sunlight. Store your equipment out of direct sunlight and dust. Do not store equipment wet. Do not tumble dry or dry clean. If any of our equipment is subject to a serious fall it should be retired.

Use of this equipment

If you use Ferno equipment, you are responsible for learning and utilising safe techniques. We disclaim all liability for any injury or loss arising from the use of this equipment. It is the user’s responsibility for maintaining this equipment in correct working condition. The products in this catalogue are designed for specific purposes and must not be used in any manner other than for which they are designed. Do not use any equipment in this catalogue until you receive proper training in the use of that equipment.

42 43

Edge Managem


Acknowledgements

Designer: Choice Creative

Ferno AustraliaHead Office 11 Johnstone Road Brendale Qld 4500 AustraliaCall toll free1800 804 647p +61 7 3881 4999f +61 7 3881 1125VIC 18 Damosh Avenue Carrum Downs VIC 3201 p +61 3 9775 1260f +61 3 9775 1360WA 22 Casella Place Kewdale WA 6105 p +61 8 9353 2300f +61 8 9353 1169

www.ferno.com.au

0005

1

EmergencyRescueHeight SafetyRock ClimbingMortuary

Documents

Ferno Australia Export Catalogue Aust... · Ferno Australia’s purpose-built factories are located around the country – in Brisbane, Perth and Melbourne – all of which are equipped