Upload
studs
View
41
Download
0
Embed Size (px)
DESCRIPTION
Testing of FENDL-3/SLIB Neutron Cross-Section Data for Applications to the IFMIF Neutron Source Facility U. Fischer, A. Serikov, S.P. Simakov. FENDL-3/SLIB Testing Methodology. Testing of neutron data library for application to High Flux Test Module (HFM) - PowerPoint PPT Presentation
Citation preview
KIT – University of the State of Baden-Württemberg andLarge-scale Research Center of the Helmholtz Association www.kit.edu
Institute for Neutron Physics and Reactor Technology
Testing of FENDL-3/SLIB Neutron Cross-Section Data for Applications to the IFMIF Neutron Source Facility
U. Fischer, A. Serikov, S.P. Simakov
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
2
FENDL-3/SLIB FENDL-3/SLIB Testing MethodologyTesting Methodology
Testing of neutron data library for application to High Flux Test Module (HFM)
Neutronic calculations using McDeLicious Monte Carlo and global 3D IFMIF Test Cell model
Calculations of n- and -fluxes, nuclear heating, gas production and displacement damage in HFTM irradiation rigs (Eurofer specimens)
Comparison of nuclear responses calculated with FDENDL-3/SLIB-R2 and standard IFMIF library
Comparison of relevant cross-section data extracted from ACE data library
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
3
Li target
Irradiation test modules
MCNP model (visualised by CATIA)
CAD model (CATIA)
Beam lines
IFMIF Test Cell Model – CAD vs. MCNP
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
4
HFTM container
IFMIF High Flux Test Module (HFTM)
HFTM test rig
vertical cut horizontal cut
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
5
Global IFMIF Neutronics Test Cell Model*
HFTM section
d+- beam HFTM
BP
Li -
jet
d+- beam HFTM
BP
Li -
jet
Ceiling
Concrete Layer
Li tank
Steel Plug
d-beam
Fro
nt W
all
Rea
r W
all
* developed by F. Wasastjerna, VTT
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
6
d-beam
Li - jet
HFTM (rig matrix)
UTM W plate
Global IFMIF Neutronics Test Cell Model
Test Module section with irradiation rigs
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
7
0,01 0,1 1 10 10010-1
100
101
102
103
104
105
106
10-1
100
101
102
103
104
105
106
ITER first wall HFTM (McDeLi) HFTM (McDeLicious)
N
eutr
on fl
ux d
ensi
ty [
1010/c
m2 /M
eV/s
]
Neutron energy [MeV]
IFMIF Neutron Flux Spectrum (HFTM)
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
8
Element Specification [w%]
Element Specification [w%]
C 0.090-0120 W 1.0-1.2 Mn 0.20-0.60 Ti <0.01 P <0.005 Cu <0.005 S <0.005 Nb <0.001 Si <0.05 Al <0.01 Ni <0.005 N 0.015-0.045 Cr 8.50-9.50 B <0.001 Mo <0.005 Co <0.005 V 0.15-0.25 O <0.01 Ta 0.05-0.09 Fe balance
Chemical Composition of Eurofer
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
9
Standard IFMIF Data Library vs. FENDL-Standard IFMIF Data Library vs. FENDL-3/SLIB-R2 : Sources of Dat Evaluations3/SLIB-R2 : Sources of Dat Evaluations
Element Isotope Standard
IFMIF- library
FENDL/SLIB-3R2 library
Hydrogen
Lithium
Beryllium Oxygen Sodium
Magnesium Aluminum
Silicon
Sulfur Potassium Titanium
1 2 6 7 9
16 23 24 27 28 29 30 32 39 46
LA150 LA150 INPE INPE
LA150 ENDF60
INPE ENDF60 LA150 LA150 LA150 LA150
ENDF/B-VI INPE
J NDFFXS2
ENDF/B-VI I ENDF/B-VI I ENDF/B-VI I ENDF/B-VI I ENDF/B-VI I ENDF/B-VI I J ENDL-HE J ENDL-HE J EFF-31
ENDF/B-VI I ENDF/B-VI I ENDF/B-VI I ENDF/B-VI I ENDF/B-VI I J ENDL-HE
Element Isotope Standard
IFMIF- library
FENDL/SLIB-3R2 library
Chromium
Vanadium Iron
Nickel
Copper
50 52 53 54 51 54 56 57 58 58 60 61 62 64 63
LA150 LA150 LA150 LA150 INPE
LA150 LA150 LA150 IEXS2 LA150 LA150 LA150 LA150 LA150 LA150
ENDF/B-VI I ENDF/B-VI I ENDF/B-VI I ENDF/B-VI I J ENDL-HE
ENDF/B-VI I J EFF-31
ENDF/B-VI I ENDF/B-VI I
J EFF-31 J EFF-31
ENDF/B-VI I ENDF/B-VI I ENDF/B-VI I ENDF/B-VI I
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
10
Standard IFMIF Library vs. FENDL-3/SLIB :Neutron fluxes in HFTM
Neutron flux density [cm-2s-1] Ratio
HFTM Rig Standard IFMIF Library (SIL) FENDL-3/SLIB-R2 (FR2) (FR2-SIL)/FR2
1-1 4.12E+14 4.12E+14 0.1%
1-2 4.11E+14 4.11E+14 0.1%
1-3 5.88E+14 5.89E+14 0.1%
1-4 7.74E+14 7.74E+14 0.0%
2-1 4.85E+14 4.86E+14 0.1%
2-2 5.21E+14 5.22E+14 0.1%
2-3 5.20E+14 5.20E+14 0.1%
2-4 7.83E+14 7.83E+14 0.1%
3-1 4.77E+14 4.78E+14 0.1%
3-2 5.99E+14 6.00E+14 0.0%
3-3 6.85E+14 6.85E+14 0.0%
3-4 6.86E+14 6.86E+14 0.0%
1-3
2-4
3-1
1-4
2-1
3-2
1-1
2-2
3-3
1-2
2-3
3-4
HFTM rigs
Rigs 1-1,1-2,1-3,1-4 39% Eurofer, 61% NaK
Rigs 2-1,2-2,2-3,2-4 87% Eurofer, 13% NaK
Rigs 3-1,3-2,3-3,3-4 52% Eurofer, 48% NaK
Material compositions
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
11
Standard IFMIF Library vs. FENDL-3/SLIB :Neutron flux spectrum in HFTM
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
12
Standard IFMIF Library vs. FENDL-3/SLIB :Photon fluxes in HFTM
1-3
2-4
3-1
1-4
2-1
3-2
1-1
2-2
3-3
1-2
2-3
3-4
HFTM rigs
Rigs 1-1,1-2,1-3,1-4 39% Eurofer, 61% NaK
Rigs 2-1,2-2,2-3,2-4 87% Eurofer, 13% NaK
Rigs 3-1,3-2,3-3,3-4 52% Eurofer, 48% NaK
Material compositions
Photon flux density [cm-2s-1] Ratio
HFTM Rig Standard IFMIF Library (SIL) FENDL-3/SLIB-R2 (FR2) (FR2-SIL)/FR2
1-1 1.42E+14 1.38E+14 -3.0% 1-2 1.42E+14 1.38E+14 -2.9% 1-3 2.06E+14 2.02E+14 -2.1% 1-4 2.17E+14 2.16E+14 -0.7% 2-1 1.80E+14 1.73E+14 -4.3% 2-2 1.91E+14 1.83E+14 -4.3% 2-3 1.92E+14 1.84E+14 -4.4% 2-4 2.49E+14 2.40E+14 -4.0% 3-1 1.68E+14 1.63E+14 -2.7% 3-2 2.09E+14 2.05E+14 -2.2% 3-3 2.00E+14 1.96E+14 -2.3% 3-4 2.01E+14 1.96E+14 -2.5%
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
13
Standard IFMIF Library vs. FENDL-3/SLIB :Photon flux spectrum in HFTM
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
14
Standard IFMIF Library vs. FENDL-3/SLIB :Nuclear heating rates in HFTM
1-3
2-4
3-1
1-4
2-1
3-2
1-1
2-2
3-3
1-2
2-3
3-4
HFTM rigs
Rigs 1-1,1-2,1-3,1-4 39% Eurofer, 61% NaK
Rigs 2-1,2-2,2-3,2-4 87% Eurofer, 13% NaK
Rigs 3-1,3-2,3-3,3-4 52% Eurofer, 48% NaK
Material compositions
Nuclear heating [W g-1] Ratio
HFTM Rig Standard IFMIF Library (SIL) FENDL-3/SLIB-R2 (FR2) (FR2-SIL)/FR2
1-1 1.14E+00 1.38E+00 17.3%
1-2 1.14E+00 1.38E+00 17.5%
1-3 1.70E+00 2.08E+00 18.3%
1-4 2.01E+00 2.54E+00 21.1%
2-1 1.53E+00 1.53E+00 0.1%
2-2 1.65E+00 1.65E+00 0.1%
2-3 1.65E+00 1.65E+00 0.2%
2-4 2.32E+00 2.34E+00 0.7%
3-1 1.41E+00 1.58E+00 11.2%
3-2 1.79E+00 2.03E+00 11.9%
3-3 1.88E+00 2.17E+00 13.3%
3-4 1.89E+00 2.18E+00 13.2%
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
15
Standard IFMIF Library vs. FENDL-3/SLIB :Nuclear heating numbers [MeV/collision] for HFTM materials
39 vol% Eurofer, 61 vol% NaK
Eurofer
NaK
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
16
Standard IFMIF Library vs. FENDL-3/SLIB :Protium production in iron of HFTM rigs
1-3
2-4
3-1
1-4
2-1
3-2
1-1
2-2
3-3
1-2
2-3
3-4
HFTM rigs
Rigs 1-1,1-2,1-3,1-4 39% Eurofer, 61% NaK
Rigs 2-1,2-2,2-3,2-4 87% Eurofer, 13% NaK
Rigs 3-1,3-2,3-3,3-4 52% Eurofer, 48% NaK
Material compositions
Protium production in I ron [appm fpy -1]
Using (n,p) + (n,n’p) reactions (MT=103 + MT=28) Ratio
HFTM Rig Standard IFMIF Library (SIL) FENDL-3/SLIB-R2 (FR2) (FR2-SIL)/FR2
1-1 4.65E+02 4.69E+02 0.8% 1-2 4.64E+02 4.68E+02 0.9% 1-3 7.11E+02 7.17E+02 0.9% 1-4 9.61E+02 9.72E+02 1.2% 2-1 5.64E+02 5.68E+02 0.7% 2-2 6.25E+02 6.30E+02 0.7% 2-3 6.23E+02 6.28E+02 0.9% 2-4 9.45E+02 9.55E+02 1.1% 3-1 5.60E+02 5.65E+02 0.8% 3-2 7.33E+02 7.40E+02 0.9% 3-3 8.68E+02 8.79E+02 1.2% 3-4 8.69E+02 8.80E+02 1.2%
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
17
Standard IFMIF Library vs. FENDL-3/SLIB :Protium production in iron of HFTM rigs
1-3
2-4
3-1
1-4
2-1
3-2
1-1
2-2
3-3
1-2
2-3
3-4
HFTM rigs
Rigs 1-1,1-2,1-3,1-4 39% Eurofer, 61% NaK
Rigs 2-1,2-2,2-3,2-4 87% Eurofer, 13% NaK
Rigs 3-1,3-2,3-3,3-4 52% Eurofer, 48% NaK
Material compositions
Protium production in I ron [appm fpy -1]
Using total production cross-section (MT=203) Ratio
HFTM Rig Standard IFMIF Library (SIL) FENDL-3/SLIB-R2 (FR2) (FR2-SIL)/FR2
1-1 8.05E+02 7.69E+02 -4.7% 1-2 8.03E+02 7.67E+02 -4.6% 1-3 1.23E+03 1.18E+03 -4.5% 1-4 1.65E+03 1.59E+03 -4.0% 2-1 9.79E+02 9.35E+02 -4.7% 2-2 1.08E+03 1.03E+03 -4.6% 2-3 1.07E+03 1.03E+03 -4.5% 2-4 1.63E+03 1.56E+03 -4.3% 3-1 9.74E+02 9.31E+02 -4.6% 3-2 1.27E+03 1.21E+03 -4.4% 3-3 1.49E+03 1.43E+03 -4.1% 3-4 1.49E+03 1.43E+03 -4.0%
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
18
Standard IFMIF Library vs. FENDL-3/SLIB :Protium production cross-section of iron
MT=103 MT=203
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
19
Standard IFMIF Library vs. FENDL-3/SLIB :Protium production in Eurofer of HFTM rigs
1-3
2-4
3-1
1-4
2-1
3-2
1-1
2-2
3-3
1-2
2-3
3-4
HFTM rigs
Rigs 1-1,1-2,1-3,1-4 39% Eurofer, 61% NaK
Rigs 2-1,2-2,2-3,2-4 87% Eurofer, 13% NaK
Rigs 3-1,3-2,3-3,3-4 52% Eurofer, 48% NaK
Material compositions
Protium production in EUROFER [appm fpy -1]
Using (n,p) + (n,n’p) reactions (MT=103 + MT=28) Ratio
HFTM Rig Standard IFMIF Library (SIL) FENDL-3/SLIB-R2 (FR2) (FR2-SIL)/FR2
1-1 4.46E+02 4.50E+02 0.8% 1-2 4.45E+02 4.48E+02 0.9% 1-3 6.82E+02 6.88E+02 0.9% 1-4 9.21E+02 9.32E+02 1.2% 2-1 5.41E+02 5.45E+02 0.7% 2-2 5.99E+02 6.04E+02 0.7% 2-3 5.97E+02 6.03E+02 0.9% 2-4 9.06E+02 9.16E+02 1.0% 3-1 5.37E+02 5.42E+02 0.8% 3-2 7.03E+02 7.09E+02 0.9% 3-3 8.33E+02 8.43E+02 1.2% 3-4 8.33E+02 8.43E+02 1.2%
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
20
Standard IFMIF Library vs. FENDL-3/SLIB :Deuterium production cross-section of iron
MT=204
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
21
Standard IFMIF Library vs. FENDL-3/SLIB :Tritium production in Iron of HFTM rigs
1-3
2-4
3-1
1-4
2-1
3-2
1-1
2-2
3-3
1-2
2-3
3-4
HFTM rigs
Rigs 1-1,1-2,1-3,1-4 39% Eurofer, 61% NaK
Rigs 2-1,2-2,2-3,2-4 87% Eurofer, 13% NaK
Rigs 3-1,3-2,3-3,3-4 52% Eurofer, 48% NaK
Material compositions
Tritium production in I ron [appm fpy -1]
Using (n,t) + (n,t’) reactions (MT=105 + MT=33) Ratio
HFTM Rig Standard IFMIF Library (SIL) FENDL-3/SLIB-R2 (FR2) (FR2-SIL)/FR2
1-1 3.61E-01 3.58E-01 -0.9% 1-2 3.60E-01 3.57E-01 -0.8% 1-3 5.34E-01 5.31E-01 -0.6% 1-4 6.99E-01 6.96E-01 -0.3% 2-1 4.35E-01 4.30E-01 -1.0% 2-2 4.74E-01 4.70E-01 -0.8% 2-3 4.72E-01 4.70E-01 -0.6% 2-4 6.87E-01 6.84E-01 -0.5% 3-1 4.32E-01 4.28E-01 -0.8% 3-2 5.51E-01 5.47E-01 -0.6% 3-3 6.41E-01 6.39E-01 -0.4% 3-4 6.39E-01 6.39E-01 -0.1%
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
22
Standard IFMIF Library vs. FENDL-3/SLIB :Tritium production in Iron of HFTM rigs
1-3
2-4
3-1
1-4
2-1
3-2
1-1
2-2
3-3
1-2
2-3
3-4
HFTM rigs
Rigs 1-1,1-2,1-3,1-4 39% Eurofer, 61% NaK
Rigs 2-1,2-2,2-3,2-4 87% Eurofer, 13% NaK
Rigs 3-1,3-2,3-3,3-4 52% Eurofer, 48% NaK
Material compositions
Tritium production in I ron [appm fpy -1]
Using production cross-sections (MT=205) Ratio
HFTM Rig Standard IFMIF Library (SIL) FENDL-3/SLIB-R2 (FR2) (FR2-SIL)/FR2
1-1 2.54E+00 4.40E+00 42.2% 1-2 2.53E+00 4.39E+00 42.3% 1-3 3.92E+00 6.84E+00 42.6% 1-4 5.19E+00 9.09E+00 42.9% 2-1 3.11E+00 5.40E+00 42.4% 2-2 3.38E+00 5.88E+00 42.4% 2-3 3.38E+00 5.87E+00 42.4% 2-4 5.12E+00 8.95E+00 42.7% 3-1 3.10E+00 5.40E+00 42.5% 3-2 4.02E+00 7.02E+00 42.7% 3-3 4.67E+00 8.15E+00 42.7% 3-4 4.67E+00 8.16E+00 42.8%
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
23
Standard IFMIF Library vs. FENDL-3/SLIB :Tritium production cross-section of iron
MT=105 MT=205
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
24
Standard IFMIF Library vs. FENDL-3/SLIB :Tritium production in Eurofer of HFTM rigs
1-3
2-4
3-1
1-4
2-1
3-2
1-1
2-2
3-3
1-2
2-3
3-4
HFTM rigs
Rigs 1-1,1-2,1-3,1-4 39% Eurofer, 61% NaK
Rigs 2-1,2-2,2-3,2-4 87% Eurofer, 13% NaK
Rigs 3-1,3-2,3-3,3-4 52% Eurofer, 48% NaK
Material compositions
Tritium production in Eurofer [appm fpy -1]
Using production cross-sections (MT=205) Ratio
HFTM Rig Standard IFMIF Library (SIL) FENDL-3/SLIB-R2 (FR2) (FR2-SIL)/FR2
1-1 2.47E+00 4.12E+00 40.1% 1-2 2.46E+00 4.11E+00 40.2% 1-3 3.80E+00 6.40E+00 40.5% 1-4 5.03E+00 8.51E+00 40.8% 2-1 3.02E+00 5.05E+00 40.3% 2-2 3.28E+00 5.50E+00 40.3% 2-3 3.28E+00 5.49E+00 40.3% 2-4 4.97E+00 8.37E+00 40.6% 3-1 3.01E+00 5.05E+00 40.4% 3-2 3.90E+00 6.57E+00 40.7% 3-3 4.53E+00 7.62E+00 40.6% 3-4 4.53E+00 7.63E+00 40.7%
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
25
Standard IFMIF Library vs. FENDL-3/SLIB :Tritium production in NaK of HFTM rigs
1-3
2-4
3-1
1-4
2-1
3-2
1-1
2-2
3-3
1-2
2-3
3-4
HFTM rigs
Rigs 1-1,1-2,1-3,1-4 39% Eurofer, 61% NaK
Rigs 2-1,2-2,2-3,2-4 87% Eurofer, 13% NaK
Rigs 3-1,3-2,3-3,3-4 52% Eurofer, 48% NaK
Material compositions
Tritium production in NaK [appm fpy -1]
HFTM Rig Standard IFMIF Library (SIL) using (n,t) + (n,t’) reactions
(MT=105 + MT=33)
Remark: MT=205 not available
FENDL-3/SLIB-R2 (FR2) using production cross-sections (MT=205)
Remark: MT=105, MT=33 not available
1-1 1.71E+01 7.14E+00 1-2 1.71E+01 7.13E+00 1-3 2.58E+01 1.10E+01 1-4 3.41E+01 1.46E+01 2-1 2.07E+01 8.73E+00 2-2 2.26E+01 9.50E+00 2-3 2.26E+01 9.49E+00 2-4 3.36E+01 1.44E+01 3-1 2.06E+01 8.71E+00 3-2 2.65E+01 1.13E+01 3-3 3.10E+01 1.31E+01 3-4 3.09E+01 1.31E+01
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
26
Standard IFMIF Library vs. FENDL-3/SLIB :Helium production in Iron of HFTM rigs
1-3
2-4
3-1
1-4
2-1
3-2
1-1
2-2
3-3
1-2
2-3
3-4
HFTM rigs
Rigs 1-1,1-2,1-3,1-4 39% Eurofer, 61% NaK
Rigs 2-1,2-2,2-3,2-4 87% Eurofer, 13% NaK
Rigs 3-1,3-2,3-3,3-4 52% Eurofer, 48% NaK
Material compositions
Helium production in I ron [appm fpy -1]
Using (n,) + (n,n’) reactions (MT=107 + MT=22) Ratio
HFTM Rig Standard IFMIF Library (SIL) FENDL-3/SLIB-R2 (FR2) (FR2-SIL)/FR2
1-1 1.11E+02 9.77E+01 -14.1% 1-2 1.11E+02 9.75E+01 -14.0% 1-3 1.70E+02 1.49E+02 -14.6% 1-4 2.30E+02 2.01E+02 -14.8% 2-1 1.35E+02 1.18E+02 -14.3% 2-2 1.50E+02 1.31E+02 -14.5% 2-3 1.49E+02 1.30E+02 -14.4% 2-4 2.26E+02 1.97E+02 -15.0% 3-1 1.34E+02 1.18E+02 -14.2% 3-2 1.76E+02 1.53E+02 -14.5% 3-3 2.08E+02 1.82E+02 -14.5% 3-4 2.08E+02 1.82E+02 -14.5%
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
27
Standard IFMIF Library vs. FENDL-3/SLIB :Total helium production in iron of HFTM rigs
1-3
2-4
3-1
1-4
2-1
3-2
1-1
2-2
3-3
1-2
2-3
3-4
HFTM rigs
Rigs 1-1,1-2,1-3,1-4 39% Eurofer, 61% NaK
Rigs 2-1,2-2,2-3,2-4 87% Eurofer, 13% NaK
Rigs 3-1,3-2,3-3,3-4 52% Eurofer, 48% NaK
Material compositions
Helium production in Eurofer [appm fpy -1]
Using total 3He + 4He production reactions (MT=207 + MT=206)
Ratio
HFTM Rig Standard IFMIF Library (SIL) FENDL-3/SLIB-R2 (FR2) (FR2-SIL)/FR2
1-1 1.68E+02 1.66E+02 -0.7% 1-2 1.67E+02 1.66E+02 -0.6% 1-3 2.56E+02 2.54E+02 -0.7% 1-4 3.43E+02 3.40E+02 -0.7% 2-1 2.04E+02 2.02E+02 -0.7% 2-2 2.24E+02 2.22E+02 -0.9% 2-3 2.24E+02 2.22E+02 -0.8% 2-4 3.38E+02 3.34E+02 -1.0% 3-1 2.02E+02 2.01E+02 -0.5% 3-2 2.63E+02 2.62E+02 -0.7% 3-3 3.10E+02 3.08E+02 -0.8% 3-4 3.10E+02 3.08E+02 -0.7%
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
28
Standard IFMIF Library vs. FENDL-3/SLIB :Helium production cross-section of iron
MT=107
MT=22
MT=207
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
29
Standard IFMIF Library vs. FENDL-3/SLIB :Helium production in Eurofer of HFTM rigs
1-3
2-4
3-1
1-4
2-1
3-2
1-1
2-2
3-3
1-2
2-3
3-4
HFTM rigs
Rigs 1-1,1-2,1-3,1-4 39% Eurofer, 61% NaK
Rigs 2-1,2-2,2-3,2-4 87% Eurofer, 13% NaK
Rigs 3-1,3-2,3-3,3-4 52% Eurofer, 48% NaK
Material compositions
Helium production in Eurofer [appm fpy -1]
Using (n,) + (n,n’) reactions (MT=107 + MT=22) Ratio
HFTM Rig Standard IFMIF Library (SIL) FENDL-3/SLIB-R2 (FR2) (FR2-SIL)/FR2
1-1 1.08E+02 9.53E+01 -12.8% 1-2 1.07E+02 9.51E+01 -12.8% 1-3 1.64E+02 1.45E+02 -13.3% 1-4 2.22E+02 1.96E+02 -13.4% 2-1 1.30E+02 1.15E+02 -13.1% 2-2 1.44E+02 1.28E+02 -13.2% 2-3 1.44E+02 1.27E+02 -13.1% 2-4 2.18E+02 1.92E+02 -13.6% 3-1 1.30E+02 1.15E+02 -12.9% 3-2 1.70E+02 1.50E+02 -13.2% 3-3 2.01E+02 1.78E+02 -13.2% 3-4 2.01E+02 1.78E+02 -13.2%
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
30
Standard IFMIF Library vs. FENDL-3/SLIB :Damage production in iron of HFTM rigs
1-3
2-4
3-1
1-4
2-1
3-2
1-1
2-2
3-3
1-2
2-3
3-4
HFTM rigs
Rigs 1-1,1-2,1-3,1-4 39% Eurofer, 61% NaK
Rigs 2-1,2-2,2-3,2-4 87% Eurofer, 13% NaK
Rigs 3-1,3-2,3-3,3-4 52% Eurofer, 48% NaK
Material compositions
Radiation damage production in I ron [dpa fpy -1]
Using MT=444 cross-section Ratio
HFTM Rig Standard IFMIF Library (SIL) FENDL-3/SLIB-R2 (FR2) (FR2-SIL)/FR2
1-1 1.48E+01 1.24E+01 -19.7% 1-2 1.48E+01 1.23E+01 -19.9% 1-3 2.30E+01 1.92E+01 -19.5% 1-4 3.15E+01 2.66E+01 -18.5% 2-1 1.80E+01 1.50E+01 -20.0% 2-2 2.00E+01 1.68E+01 -19.5% 2-3 2.00E+01 1.67E+01 -19.5% 2-4 3.13E+01 2.64E+01 -18.5% 3-1 1.78E+01 1.49E+01 -19.9% 3-2 2.36E+01 1.97E+01 -19.5% 3-3 2.80E+01 2.35E+01 -18.9% 3-4 2.80E+01 2.36E+01 -18.9%
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
31
Standard IFMIF Library vs. FENDL-3/SLIB :Displacement damage production cross-sections of iron
Iron (MT=444)
Fe-56 (MT=444)
Fe-54 (MT=444)
U. Fischer, KIT, FENDL-3/SLIB data testing for IFMIF 2nd Research Coordination Meeting on FENDL-3, IAEA, Vienna, March 23 – 26, 2010
32
FENDL-3/SLIB FENDL-3/SLIB Testing - ConclusionsTesting - Conclusions
It works for IFMIF applications !
Good results for n- and -flux spectra
Nuclear heating in general good
Gas production dataProblems in d and t production data (iron, NaK)
Reduced damage production in Eurofer (20%)
Still many "matching problems" at 20 MeV
Further applications tests required for Tritium release & creep/fatigue Test Modules, and shielding calculations