Feedback Line Brochure 4.7.05

7/27/2019 Feedback Line Brochure 4.7.05

http://slidepdf.com/reader/full/feedback-line-brochure-4705 1/12

Industrial-Duty Absolute Encoder

Commercial-Light Duty Incremental Encoder

Industrial-Duty Incremental Encoder

Mill-Duty Incremental Encoder

Ultra-Performance Resolver



Our absolute encodersreduce machine downtimecompared to standard,

incremental technology encoders, without the cost usually associated with absolutes. The new ACUROline has been engineered for field dependability, by reducing the number of internal components andadding all-digital high-speed networking.

ACURO AI25Industrial AbsoluteEncoderSingle-turn or multi-turn versions offer outstandingresolution. The latest

generation of OptoASIC technology adds reliability through component reduction and diagnostics.It is one of the smallest absolutes available: 50%more compact than earlier line. Priced for allapplications, not just the critical few.

Size/Mounting: 2.5” square flange, servo, or hub shaft mount

Resolution: Up to 14- or 17-bit single-turn, 4096 revolutions multi-turn

Shaft/Bore: Solid shaft and hub shaft versions in common shaft diameters

Power: 10-30 VDC, 5 VDC

Output: DeviceNet, Profibus, Interbus, BiSS, Parallel

AD36 Drive AbsoluteEncoderHub shaft encoder offershigh resolution and a low profile. Networking speedson BiSS open standardsupport speeds five times

faster than proprietary protocols. Low current consumption of 85 mA helps lower the drive cost.Rated up to 120°C.

Size/Mounting: 36mm dia., hub shaft

PPR: 0013, 0019, 1213, 1219

Bore: 8mm

Power: 5 VDC or 7-30 VDC

Output: BiSS, SSI, sincos

Absolute Industrial-Duty Encoders

Types: Single/Multi-Turn, with diverse communica- tion/fieldbus options

Guide: Absolute encoders keep track of position at all times, and provide it at power-up. There is no need to home the machine to establish a reference position when power is restored. They are useful in applications when establishing a home position will

cause costly downtime or scrap, is impractical, or insufficiently accurate.

Application/Industries:

Robotics Machine Tool

Commercial Printing

Hazardous Environments

ACURO AD25 Drive Absolute Encoder ACURO has exceptional

22-bit resolution – thehighest on the market. It isdesigned for integration into

BLDC servo motors for the most demandingapplications such as CNC, precision positioning, andhigh quality printing. Networking on BiSS openstandard supports speeds five times faster thanproprietary protocols. Low current consumption of 85 mA helps reduce system cost. Rated up to 120°C.

Size/Mounting: 2.5” face or servo mount

Resolution: Up to 14- or 17-bit single-turn, 4096 revolutions multi-turn

Shaft: 10 mm, tapered Power: 5 VDC

Output: BiSS, SSI, sine/cosine

AC110 Drive AbsoluteEncoderHollowshaft encoder providesabsolute performance formoderately large shafts.Networking speeds on BiSS

open standard support speeds five times faster thanproprietary protocols. Low current consumption of

85 mA helps lower the drive cost. Rated up to 120°C.Size/Mounting: 110mm dia., hollowshaft (tether)

PPR: 11 to 22 bit

Bore: Up to 50mm

Power: 5 VDC or 10-30 VDC

Output: BiSS, SSI

Reader Tip: For complete specifications, see our catalog or Quick

Reference Guide.

TM

Absolute

Encoders

NEW

NEW



General Purpose, Commercial-Light Duty Encoders

Types: Shafted

Guide: Light-duty encoders deliver feedback for position and speed control and are the first choice for small spaces and long life. Compact electronics allow for smaller, more reliable designs.

Series E12 Miniature EncoderServo or face-mount shafted encodersare among the smallest available, sothey squeeze into cramped spaces.They feature high resolution – up to

1024 PPR with optional marker pulse and electronicoperating speeds up to 100 kHz.

Size/Mounting: 1.1” dia. x 1.1”: length

PPR: Up to 1024, quadrature, marker optional

Shaft: 1/8”; load up to 1lb. axial, 1lb. radial

Power/Output: 5, 12, 15 VDC; line driver

Series E14 Miniature Encoder

Servo or face-mount shafted encodersare among the smallest available, sothey squeeze into cramped spaces.They feature high resolution – up to1024 PPR with optional marker pulse

and electronic operating speeds up to 100 kHz.

Size/Mounting: 1.5” dia. x 1.5”: length

PPR: Up to 2540, quadrature, marker optional

Shaft: 1/8”, 1/4”; load up to 3lb. axial, 5 lb. radial



Photocopiers

Desktop Printers

Elevators

Medical Equipment

Semiconductor Fabs

Incremental

Encoders

Series E23/EC23Compact EncoderFor industrial and commerciapplications with limited spaRugged metal housing is onl

2.3” dia. It provides exceptional resolution, up to 50PPR, and electronic operating speed to 250 kHz. ThE23/EC23 has low-inertia and low-starting torque.

Size/Mounting: 2.3” dia. x 1.65” length; servo or face mount

PPR: (E23) up to 2540, (EC23) 3000 to 5000, quadraturindex

Shaft: 1/4”, maximum load: 5 lb. axial and radial

Power/Output: 5 to 26 VDC; (E23) open collector, totem pline driver, (EC23) open collector, push-pull, differential line driver



General Purpose Industrial-Duty Encoders

Types: Shafted

Guide: Industrial encoders are required for digital feedback applications in environments having electrical noise,airborne contaminants, and medium horsepower motors.

Series H20, H42, H58Industrial EncodersEconomical solutions for medium-resolution applications in an industrialenvironment. H20 and H58 havelong-life bearings, noise immunity,

and washdown protection.

Size/Mounting: ( H20) 2.06” dia.; (H42) 2.5”dia.; (H58) 58mm dia.; (H20, H42, H58) flange (except H58), servo or face

mount

PPR: (H20, H58) Up to 2540, quadrature, optional index; (H42) up to 600, quadrature

Shaft: (H20) 3/8”, 1/4”, or 10mm; (H42) 3/8”, (H58) 6mm,10mm; (H20, H58) load up to 80lb. axial and radial

Power/Output: 5 to 26 VDC; (H20) open collector, push-pull,differential line driver, (H42, H58) push-pull, differential line driver

Series H56 Rotopulser®

EncoderThe most rugged incrementalencoder available is designedto provide precision digital

measurements in harsh environments. A virtually indestructible design is suitable for severe duty inpaper, steel, and lumber mills. Line driver output supportslong cable lengths.

Size/Mounting: 56 C-face and foot mounting; interchangeable with C-face mount tachs BC42 and 46

PPR: Up to 2500, index optional

Shaft: 5/8”, maximum load: 50 lb. axial, 100 lb. radial

Power/Output: 5 to 26 VDC; open collector, push-pull, differential

line driver



Commercial Printing

Packaging

Windmills

Series HA25/HR25/HC25/HA725 EncodIdeal for shop-floorenvironments, the ultra-reliable HA25 design isavailable with unbreakablemetal disk (HR25) or high

resolution (HC25). Long-life bearings, noiseimmunity, and washdown protection. High speedhigh resolution version (HA725) available.

Size/Mounting: 2.5” dia., flange, servo, or face moun

PPR: (HA25) Up to 2540, (HR25) up to 1024, (HC2up to 1024; (HA725) up to 10,000; quadrature,optional index

Shaft: 3/8”, 1/4”; load up to 40 lb. axial, 35 lb. radia(HA725) 3/8”, load up to 24 lb. axial

Power/Output: 5 to 26 VDC; open collector (except HA725), totem pole, differential line driver

Series 21/22 EncodGeneral-purpose design iscompatible with most programmable controller

electronic counters, motiocontrollers, and motor dr

Use with leadscrews, rack-and-pinions, etc.Environmentally sealed enclosure and heavy duty bearings.

Size/Mounting: 2.5” cube, face mount with pilot

PPR: Up to 1270, quadrature and marker available

Shaft: 3/8”, 1/4” or 6mm

Power/Output: 5 to 26 VDC; open collector, totem poledifferential line driver

Incremental Encoders



Series M9, M14Modular EncodersEconomical motor feedbackfor servo and steppermotors, sized as small as0.9". Easy “snap-on”installation.

Size/Mounting: (M9) 0.9" dia., (M14) 1.5" dia.; hub shaft or thru-shaft mount

PPR: Up to 1024, quadrature, optional index

Shaft: Popular English and metric hub diameters

Series E9 MiniatureEncoderPrecise feedback formachines and actuators toosmall for standard encoders.Its low-power standby mode

is ideal for battery powered devices. Speeds up to200 kHz.

Size/Mounting: 0.9” dia. x 0.8” length

PPR: 512, quadrature, optional index

Bore: Popular English and metric hub diameters

Power/Output: 5 VDC; sink source

Motor Mount Commercial-Light Duty Encoders

Types: Hub Shaft, Hollowshaft

Guide: Commercial-duty encoders deliver feedback for motor and position control and are the first choice for low horsepower motors. Compact electronics allow for smaller,more reliable designs.


Photocopiers Desktop Printers

Elevators

Medical Equipment

Semiconductor Fabs

Series E14 Hub Shaft EncoderThe Series E14 is a totally enclosed, easy-to-install, incre-mental encoder designed forcommercial and industrial

applications with limited space. It incorporates the latest in microelectronic packaging, LED light sources,and matched sensors.

Size/Mounting: 1.44" dia., servo or face mount

PPR: Up to 2540; quadrature, optional index

Shaft: 1/8" or 1/4"; maximum. load: 3 lb. axial,5 lb. radial


E14 with IntegralCoupling This encoder has an integralshaft coupling that simplifiesinstallation. It is designed for

standard mounting on NEMA size 23 and 34 motors, and it is a drop-in replacementfor the E Option of Compumotorsteppers and drives. Precision bearings, O-ring seal.

Size/Mounting: ( for NEMA size 34 motors) 1.63” dia. x 3.29” length, (for NEMA size 23 motors) 1.63” dia. x 3.79” length


Bore: 1/4”, 3/8”


Incremental

Encoders



Series M15, M21Modular EncodersCost effective, modularencoders for stepper andservo motor feedback. Easy installation plus automatic

disk centering and gapping. They handle up to12,000 RPM, 120°C, and electric operating speedsbeyond 200 kHz.

Size/Mounting: (M15) 1.5” diameter x 0.8” length,(M21) 2.1” dia. x 0.8” length; hub shaft or thru-shaft mount

PPR: Up to 1024 (M15), 2048 (M21); quadrature,index standard

Bore: Popular English and metric hub diameters

Power/Output: 5, 12 VDC; open collector, line driver

Series F10, F15, F21Commutating EncodersDrop-in replacement forresolvers. Compact dimensions and flying leads

result in a low-profile package. Speeds up to 300kHz for faster servo loops.

Size/Mounting: (F10) 1.25” dia., (F15) 1.5” dia., (F21) 2.2” dia.; thru-shaft mount

PPR: Up to 2048

Bore: Hub bore diameter 6mm Power/Output: 5 VDC; open collector, differential line driver

Servo/Commutation Motor Mount Industrial-Duty Encoders

Types: Modular, Hub Shaft, Hollowshaft, Commutating

Guide: Precise feedback control for servo and stepper motors. A wide range of styles provide for application flexibility, easy installation, and compact motor designs.


Photocopiers Elevators

Medical Equipment

Semiconductor Fabs

Series F14 and F18Commutating EncodersPremium servo motor feedbackin a compact, easy-to-installpackage. High resolution forlow-speed smoothness.

Optional commutation tracks for brushless servomotor control.

Size/Mounting: (F14) 1.55” dia., (F18) 1.96” dia.PPR: Up to 5000 (F14), up to 10,000 (F18)

Bore: Hub bore diameters 0.25”, 6mm, 8mm

Power/Output: 5 VDC; open collector, differential line driver




Motor Mount Industrial-Duty Encoders

Types: Modular, Commutating, Hub Shaft, Hollowshaft

Guide: Our industrial-duty motor mount encoders provide reliable feedback in noisy, industrial environments.Ruggedized versions with unbreakable metal disks are available for harsh conditions or heat up to 120º C.

H20 Hub Shaft Encoder An economical solution formedium resolution applications. Hubshaft design simplifies mounting onmotor or machine. Long-life bearings,optional unbreakable disk, andoptional washdown rating.

Size/Mounting: 2.0” dia. x 2.5” depth, hub shaft mount


Bore: 3/8”, 5/8”

Series HS20 Sealed

Hollowshaft EncoderHollowshaft design simplifiesmounting, and a flexible tetherminimizes bearing load. Featuresinclude: short depth, unbreakabledisk, electrically isolated, and thermally

insulated. Shaft is environmentally sealed at both ends.

Size/Mounting: 2.5” dia. x 1.9” depth, hollowshaft mount


Bore: 6mm to 5/8”

Series HS35 SealedHollowshaft EncoderHollowshaft design eliminatesmounting bracket, flexible shaft coupling, and installation labor.The direct shaft mount eliminatesalignment procedures, and a flexible

tether minimizes bearing load. Features include: short depth,unbreakable metal disk, electrically isolated, and thermally insulated. Shaft is environmentally sealed at both ends.

Size/Mounting: 3.54” dia. x 1.8” depth, direct shaft mount


Shaft: bore size 6 mm to 1-1/8”

Series R45 Rotopulser®

Encoder With a thin 5/8” profile, this durableencoder mounts directly on NEMA Cface motors. Non-contact ring-and-geardesign is reliable even in wet, dirty, hightemp environments.

Size/Mounting: Motor frame sizes: 56C to 184C; ring-kit mount

PPR: Up to 60, 120 optional, quadrature

Bore: 5/8”, 7/8”


Presses Assembly Lines

Cutters

Machine Tools

Elevators

SeriesHA26/HR26/HC26EncodersThe ultra-reliable HA25 de

is available with unbreakabmetal disk (HR25) or highresolution (HC25). Long-li

bearings, noise immunity, and washdown protectioIntegral shaft coupling and flange provide thermaand electrical isolation.

Size/Mounting: 2.5” dia., flange, servo, or face mount

PPR: (HA25) Up to 2540, (HR25) up to 1024, (HC25to 1024; (HA25, HR25, HC25) quadrature, optional in

Bore: 3/8”, 1/4”; load up to 40 lb. axial, 35 lb. radial

RF53 Incremental

EncoderShafted encoder is idealfor elevators and otherapplications that requiretapered shaft and long-termtrouble-free operation. Con

factory for availability.

Size/Mounting: 53mm dia., shaft mount (motor mount)

PPR: Up to 4096

Shaft: Custom - consult factory

RI80E IncrementalEncoderIdeal for applications that require long service life andreliable performance. The size, output, and hollowshastyle are an exact fit for

elevators. Consult factory for availability.

Size/Mounting: 100mm dia., hollowshaft mount

PPR: 1024, 2048 and 4096

Bore: Up to 45mm

Incremental

Encoders

NEW

NEW



Explosion Proof Industrial-Duty Encoders

Guide: Explosion-proof encoders operate safely in environments where the danger of combustion is present.


Petroleum Refineries

Chemical Plants

Flour Mills

Coal Conveyance

Series X25 Encoderfor HazardousEnvironmentsHeavy duty industrialenclosure has 1/2" dia.

conduit entry. Forposition and speed control in refining, gasolinestorage and dispensing, chemical coatings,plating, dry cleaning, painting, spraying, andother hazardous environments. Approved forNEC Class 1 and 2, Divisions 1 and 2, GroupsC, D, E, F, G.

Size/Mounting: 4” square flange mount

PPR: Up to 5,000; quadrature, index available

Shaft: 1/4” or 3/8” dia.; max. load: 40 lb. axial,40 lb. radial

Power/Output: 5-26 VDC/open collector; push-pull,

differential line driver

MagCoder® HS35MEncoderFits a wide range of shaft types and sizes. Fast,flexible mounting and

adjustable anti-rotationarm give high tolerance of shaft vibration.

Size/Mounting: 3.6” x 7.4” dia, flexible hollowshaft mount

PPR: Up to 1024, quadrature, index

Bore: 6mm to 1.25”

Power/Output: 5-26VDC; differential line driver

Magneto-Resistive Industrial-Duty Encoders

Incremental

Encoders

Guide: Flexible mounting and adjustabanti-rotation arm give high tolerance ofshaft vibration. Design allows encoder tmove axially, radially and at a tangent


Packaging

Commercial Printing

Lumber

Presses

Magneto-Resistive




Magneto-Resistive Heavy-Duty Encoders

Guide: SLIM Tach ® Series encoders are built for heavy- duty industrial applications using magneto-resistive technology that is unaffected by dirt, dust, and dampness.Their slim, rugged design is popular with large motor OEMs and for applications with space constraints.

SLIM Tach® 56 EncoderBearingless, rugged encodermounts directly to C-face motors.Only 0.75” thick, it is ideal for tight machine configurations in harshenvironments.

Size/Mounting: 4.5” 56 NEMA C-face

PPR: 64 to 2048 PPR, quadrature, optional index (512 and above)

Bore: 5/8” to 2.5” shaft diameter Power/Output: 5-15 or 5-26 VDC; line driver

SLIM Tach® SL85 EncoderBearingless encoder for AC vectormotors provides higher resolutionthan traditional gear tooth ring kits.Only 1.125” (35mm) thick, it hashardened encapsulated electronics.

Size/Mounting: 8.5” 180 NEMA C-face, thru-shaft,end-of-shaft, and double C-face

PPR: Up to 2048, quadrature, optional index (512 and above)

Bore: 0.625” to 3.75” shaft diameter

Power/Output: 5-15 VDC; line driver

SLIM Tach® RL67 EncoderFits 6.75” machined recess on RPM™

AC or DC motors made by RelianceElectric. Low profile “pancake”design adds only 1.5” to motorlength.

Size/Mounting: 4.5” dia, hollowshaft mount


Bore: 0.625” to 1.25”

Power/Output: 5-15V; differential line driver


Steel Paper

Lumber

Flooring

Textile

SLIM Tach® 1250Encoder An economical, bearingleheavy-duty encoder designfor 12.5” C face motors.Occupies only 1.4” of mot

shaft. High power line driver for long cable lengt

Size/Mounting: 12.5” C face motors, hollowshaft moun

PPR: Up to 1025, quadrature, optional index (512 an

above)

Bore: 5/8” to 3.75”

Power/Output: 5-26V; up to 26V differential line drive

Magneto-Resistive




RIM Tach® 8500Encoder A tachometer for AC and DCdrive control systems. Thin,pancake style mounts directly on the motor. Bearingless

design increases reliability. Dual sensors provideredundant signal in case of sensor failure. Fieldreplaceable sensor can be replaced in minutes, without replacing entire unit. Innovative designrequires no calibration.

Size/Mounting: Up to 8.5”, thru-shaft or end-of-shaft

PPR: 60 to 1200 PPR, quadrature, optional index (480 and above)

Bore: 0.625” to 4.5” shaft diameter

Power/Output: 5-15 or 5-26 VDC; line driver

RIM Tach® 1250Encoder Accepting shaft diameters upto 8", it is ideal for crane andhoist applications. Ductile

cast-iron enclosure protects against acid wash down.

Size/Mounting: 12.5” NEMA C-face, thru-shaft


Bore: Up to 8" shaft diameter


RIM Tach® 6200

Encoder A stainless-steel and cast-ironindustrial tachometer idealfor close-coupled, belt, or

wheel-driven setups in process environments.

Size/Mounting: 4.5" 56 NEMA C-face, thru-shaft


Shaft: 5/8" shaft diameter


Magneto-Resistive Mill-Duty Encoders

Guide: RIM Tach ® Series mill-duty encoders are our most rugged encoders. Their magneto-resistive technology,cast iron and steel enclosures, large bore sizes, and double-sealed, deep-groove radial bearings make these ruggedized encoders suitable for the harshest of plant environments.


Steel Mills Paper Mills

Lumber Mills

Flooring Manufacturing

Textile Mills

RIM Tach® HS85EncoderHeavy cast-iron and stainless-steel construction make theRIM Tach HS85 the most rugged hollowshaft encoder in

the industry. Heavy duty double-sealed bearingsdeliver long life. Sensors are interchangeable,

enabling fast maintenance.Size/Mounting: hollowshaft mount

PPR: Up to 2048 , quadrature, optional index (480 and above)

Bore: 1.125” to 4.5” diameter

Power/Output: 5-15 or 5 to 26 VDC; line driver

Magneto-Resistive




Ultra-Performance Resolvers

Types: Heavy-Duty & Mill-Duty Housed, Heavy-Duty & High Accuracy Frameless

Guide: Unlike rotary encoders, which use a coded disk to determine position and have a digital output, resolvers are magnetic devices that use two sets of rotating windings and a fixed core winding to generate an analog (sine and cosine) feedback output. Considered more rugged than

encoders, they are used in adverse operating conditions involving extreme temperature, high shock and vibration,and dirty environments.

Heavy-Duty HousedBrushless ResolversSeries 11, R11Ideal mate for brushless servomotors.

Brushless construction uses a rotary transformer to pass the referencesignal to the rotor, eliminating components that can limit lifeand cause noise. Series 11 has excellent angular accuracy andrepeatability. It is rated up to 155°C for high temperatureapplications.

Size/Mounting: 1.1” diameter, servo

Accuracy: + - 2 to + - 20 arc min.

Shaft: 0.120”

Mill-Duty Housed BrushlessResolver Series R25Brushless resolvers are the betterchoice over encoders forapplications that involve very high temperature, vibration and

shock, and dirty environments. The R25 uses a front-and-rearbearing arrangement that gives two or three times the radialload bearing capacity and up to 10 times the life of competingpackages having duplex bearings. Rated for ruggedness:IP-65 protection, 125°C continuous duty, shock to 200g, and vibration to 40g.

Size/Mounting: 2.5” dia., flange or servo mount

Accuracy: + - 7 to + -20 arc min Shaft: 0.3745”, maximum load: 40 lb. axial,60 lb. radial



Wood Working

Metal Working

Plant Automation

Heavy-Duty FramelesBrushless ResolversSeries 10, 15, 21, 31,Provide absolute positionfeedback for brushless motrobots, and direct-drive mo

in precision rotary platforms and similar servoapplications. The series is ruggedized against vibrand shock, able to operate up to 220° C, resistant noise, and impervious to most industrial contaminOptions include multiple speeds, radiation hardenhigh temperature, flux shielding technology, and

stainless steel housings. HaroMax Resolvers in sizeand 21 feature a tooth-wound design that reduceselectrical error 50 percent.

Size/Mounting: 1.05”-5.5” dia., flange or servo-groove m

Accuracy: + - 2 to + - 20 arc min

Bore: Up to 3.6315”

Heavy-Duty High Accuracy Series 700HaroMax® Resolvers

The HaroMax Series of frameless, brushless resolveprovides maximum accurac

and minimum error for demanding position and sfeedback applications.

Size/Mounting: 1.5”and 2.5” dia., flange or servo-groovmount

Accuracy: + -5 arc min

Bore: 12mm, 20mm

Magneto-Resistive Incremental

Encoders



Worldwide Brands:

Anderson TM

Dynapar TM

Eagle Signal TM

Harowe TM

Hengstler TM

Negele TM

NorthStar TM

Partlow TM

PMATM

Veeder-Root TM

West TM

+1 800.873.8731 • www.feedbackdevices.com

More Available. With factories around the world, global sales and applications support, and anexpansive network of distributors, we stay close to our customers – shortening lead times and fostering responsiveness. A three-day lead time is standard, with same-day shipments available o

many products.

More Precise. After 230 combined years of experience in factory automation, we understand increasing demands for product performance. Our encoders and resolvers give you precise contro your designs, with resolution up to 22 bits.

More Durable. Experience with more than 25,000 customers has taught us to design for durabiratings up to 220°C and mechanical shock and vibration specs that others envy.

More Customizable. JIT manufacturing enables us to immediately produce any of thousands of product variations. And we’re happy to work with customers to customize encoders to exact requi

© 2005 Danaher Industrial Controls Group

P i d i U S A

A division of Danaher, a

Fortune 500 company with offices

in 30 countries

around the world.

Danaher Industrial Controls Group was formed through the merger of eleven premier brands, each widely respected within their

product categories. Now integrated into the

Danaher Business System, these brands provide what you need to control the performance and reliability of your designs…controls for your world.

nderson TM brand, Dynapar TM brand, Eagle gnal TM brand, Harowe TM brand, Hengstler TM

and, Negele TM brand, NorthStar TM brand,artlow TM brand, PMA TM brand, Veeder-Root TM

and, West TM brand, RIM Tach ® , and SLIM ach ® are trademarks or registered trademarks

D h C p ti d it b idi i

Headquarters: 1675 Delany Road • Gurnee, IL 60031-1282 • USA

Phone: +1 847.662.2666 • Fax: +1 847.662.6633 • Email: [email protected]

For additional information or a full-line catalog, contact your DICG representative at

+1 800.873.8731 or visit our web site at www.DanaherIndustrialControls.com.

Satellite Locations:North America: North Carolina, South Carolina, Connecticut, Massachusetts, New York,

Canada, British Virgin Islands

Europe: United Kingdom, Italy, France, Germany, Spain, Slovakia

Latin America: Brazil

Asia: China, Japan, Korea, Singapore

Documents

Feedback Line Brochure 4.7.05