Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
SLIM SURFACE LEDProject Name:
Note: Type:
Catalog Number:
Submittal form is available @ www.iuseeliteled.comTel: 323-888-1973 • Fax: 323-888-1977
Specifications and Dimensions subject to change without notice.
5/8” Thick Surface LED Fixture
Round LED Slim Surface Mount Dimmable Fixture
SPECIFICATIONS:
APERTURE 5.5” 7” 9” 11”
LUMENS 600 lumens 900 lumens 1200 lumens 1500 lumens
WATTAGE 10W 15W 18W 22W
CCT 30K/40K/50K
CRI 90
VOLTAGE 120V
POWER FREQUENCY 50/60 Hz
FINISH White
AMBIENT ENVIRONMENT Damp location
Ordering Information: Example: RL791-900L-DIMTR-120-30K/40K/50K-90-WH
FIELD SELECTABLE CCT SLIM SURFACE MOUNT DOWNLIGHT
SERIES/APERTURE/LUMENSRL591-600L
RL791-900L
RL991-1200L
RL1191-1500L
- 5-3/8” aperture/600 lumens
- 7-7/8” aperture/900 lumens
- 9” aperture/1200 lumens
- 12” aperture/1500 lumens
CCT30K/40K/50K - 3000K/4000K/500K
CRI90 - 90+ CRI
VOLTAGE120 - 120V
DIMMINGDIMTR - Triac
FINISHWHBZBN
- White- Bronze- Brushed Nickel
3.5” Round(Plastic)
Pancake J-Box(Metal)
4” Square(Plastic)
4” Octagonal(Metal)
4” Square(Metal)
Fire Rated J-Box
Note: A 2-1/8” deep octagon junction box is recommended for through circuit wiring applications.
Compatible Junction Boxes:
ENGINEERED FOR VERSATILITY AND PERFORMANCE The Elite LED Slim Surface Mount has been engineered to install into most standard junctions boxes. Up to 1500 usable lumens are directed from the luminaire to the work surface. Easy to Install, applicable toJunction Box or Recessed Can Installation
OPTICS The Elite LED Module system is much more than just a simple LED retrofit. The Elite LED system is a highly engineered work of design and optical science which produces up to 1500 lumens. Our meticulously crafted optics gather the light scattered by the LED chip and shape it into a functional beam with uniform light distribution.
DIMMINGIntended for Triac (120V) base on configuration. Minimum 90º supply conductors.
COMPLIANCENon-conductive fixture for shower light application. Product complies with the requirements of the California Energy Commission regulated under Title 24.
LISTINGETL listed for damp location (wet location - with covered ceilings)Energy Star certified
WARRANTYThe Elite LED lighting system carries a five-year carefree warranty for parts and components. (Labor not included)
12”
9”
7-7/8”5-3/8”
Due to the changes of constant improvement in LED technology, all details are subject to change without notice. Consult factory for up to date information. w w w . i u s e e l i t e . c o m
4”4 Inch Square Slim LEDRL476
NOMINAL LUMENS DELIVERED LUMENS WATTAGE
700 772 11W
550 521 9W
Based on 5000K, 90+ CRI. Actual wattage may vary +/- 5%
OPEN
4
4.1”
1.25”
3.3”
4.25”
5.9”
0.07”
1.2”
4.7” 2.6”
6.8”
Cut hole in ceiling. Insert luminaire into opening by squeezing spring clips on both sides of luminaire. The width in ceiling needed for the driver to fit is 3”.
INSTALLATION
FEATURES4” square slim LED luminaire engineered for new construction, remodel, or retrofit to accommodate insulated or dropped ceilings. Remote driver allows easy installation and maintenance. Small aperture and shallow depth are ideal for unlimited applications.
• IC-rated and Air-Tight ready and may be in direct contact with insulation.• Can be installed in shallow plenum spaces.• May be installed in drywall or suspended ceilings.• Flicker-free 120V forward-phase Triac dimming down to 5%.
LUMENS
DIMMING
CCT
COLOR QUALITY
CRI
EMERGENCY
LIFETIME
CONSTRUCTION
TRIM OPTION
TRIM COLORS
550, 700
DIMTR (Triac)
27K, 30K, 35K, 40K, 50K
3-Step MacAdam Ellipse
90+
16W high voltage inverter
L70 at 50,000 Hours
Aluminum die-cast body and trim
Square Flat Lens
WH (White)
PHOTOMETRIC TESTS In Accordance with IES LM79-08, LM80 and TM-30, TM-21
Due to the changes of constant improvement in LED technology, all details are subject to change without notice. Consult factory for up to date information. w w w . i u s e e l i t e . c o m
4”4 Inch Square Slim LEDRL476
TYPE LUMEN CCT CRI FINISHRL476 o 700L-DIMTR-120
o 550L-DIMTR-120o 27Ko 30Ko 35Ko 40Ko 50K
o 90+ o WH-White
EXAMPLE: RL476-550L-DIMTR-120-30K-90-WH
26"
6 18 "
2 34 "
4 12 "
13"
3 116 "
316 "
26"
13" 2 1516 "
6 18 "
4 12 "
3 116 "
316 "
4 14 "
26"13"
6 18 " 4 9
16 "
3 116 "
316 "
26” 13” 4-1/4”
3-1/16”
3/16”
6-1/8” 6-9/16”
RL-ACC-SLIM-1-10F
SLIM TRIM ACCESSORIES
OPTIONSo RL-ACC-SLIM-1-10F - 10ft Long Extensiono RL-ACC-SLIM-1-20F - 20ft Long Extensiono RL-UNV-4/5/6 - Universal Mounting Plate for 4”,5” and 6”o RL-ACC-SLIM-4-ROUGHPLATE - 4” Mounting Plate
442
2”
I S S U E 1 5 G 2 1 R e v . 0 . 1
WWW.IUSEELITE.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333
S H I P P I N G AVA I L A B L E
1” GIMBAL LED FIXTURE WITH REFLECTORw 1-5/8” THICK LED FIXTURE WITH HIGHER BRIGHTNESSw FOR NEW CONSTRUCTION – INSULATED AND DROPPED CEILINGS
w FEATURES1” fixtures with integral LEDs. Isolated external driver factory installed inside junction box.One driver for every fixture required. PF>0.98.
w Cast aluminum trim
w Dimmable
w ETL approved and Energy Star Certified
w Type IC Rated – Approved for direct contact with insulation
w Air-tight and damp location approved
w Fast and easy to install in limited space locations
w External driver factory mounted inside connection box - 120V
w New construction rough-in plates and jumper cables available
w Available Temperatures (3000K, 3500K and 4000K)
w 50,000 Hours Life; 5 Year Warranty
TECHNICAL SPECIFICATIONS
w WATTAGES: 5W
w OUTPUT: Default Driver Voltage: 120V AC 60 Hz (Dimmable)
w CRI: 90+
w AMBIENT TEMPERATURE: -40°F (-40°C) to +104°F (+40°C)
w ADJUSTABLE: 30º tilt and 360º rotation
CERTIFICATIONS• ETL listed• ENERGY STAR
INSTALLATION
• Cut hole in ceiling and snap fixture in opening with attached spring clips. Space in ceiling needed for the driver to fit through the ceiling height – 3".
360DIMENSION
INPUT VOLT. INPUT FREQ. THD POWER FACTOR INPUT POWER LUMENS
120 60Hz <20% >0.98 5W(+/-5%) 360L
12-7/8”
2-3/4”
1-3/4”
2”
TYPE LUMEN CCT CRI FINISH ACCESSORIES
RL173 o 360L-DIMTR-120 o 30Ko 35Ko 40K
90+ WH o RL-ACC-SLIM-1-10Fo RL-ACC-SLIM-1-20F
EXAMPLE: RL173-360L-DIMTR-120-30K-90-WH
RL-ACC-SLIM-1-10F10-ft long extension
RL-ACC-SLIM-1-20F20-ft long extension
2
INC
H
LE
D
RE
TR
OF
IT
MO
DU
LE
RL173 LED1” GIMBAL LED FIXTURE WITH REFLECTOR
2-1/2”
1-5/8”
442
2”
I S S U E 1 5 G 2 1 R e v . 0 . 1
WWW.IUSEELITE.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333
S H I P P I N G AVA I L A B L E
1” GIMBAL LED FIXTURE WITH REFLECTORw 1-5/8” THICK LED FIXTURE WITH HIGHER BRIGHTNESSw FOR NEW CONSTRUCTION – INSULATED AND DROPPED CEILINGS
w FEATURES1” fixtures with integral LEDs. Isolated external driver factory installed inside junction box.One driver for every fixture required. PF>0.98.
w Cast aluminum trim
w Dimmable
w ETL approved and Energy Star Certified
w Type IC Rated – Approved for direct contact with insulation
w Air-tight and damp location approved
w Fast and easy to install in limited space locations
w External driver factory mounted inside connection box - 120V
w New construction rough-in plates and jumper cables available
w Available Temperatures (3000K, 3500K and 4000K)
w 50,000 Hours Life; 5 Year Warranty
TECHNICAL SPECIFICATIONS
w WATTAGES: 5W
w OUTPUT: Default Driver Voltage: 120V AC 60 Hz (Dimmable)
w CRI: 90+
w AMBIENT TEMPERATURE: -40°F (-40°C) to +104°F (+40°C)
w ADJUSTABLE: 30º tilt and 360º rotation
CERTIFICATIONS• ETL listed• ENERGY STAR
INSTALLATION
• Cut hole in ceiling and snap fixture in opening with attached spring clips. Space in ceiling needed for the driver to fit through the ceiling height – 3".
360DIMENSION
INPUT VOLT. INPUT FREQ. THD POWER FACTOR INPUT POWER LUMENS
120 60Hz <20% >0.98 5W(+/-5%) 360L
12-7/8”
2-3/4”
1-3/4”
2”
TYPE LUMEN CCT CRI FINISH ACCESSORIES
RL173 o 360L-DIMTR-120 o 30Ko 35Ko 40K
90+ WH o RL-ACC-SLIM-1-10Fo RL-ACC-SLIM-1-20F
EXAMPLE: RL173-360L-DIMTR-120-30K-90-WH
RL-ACC-SLIM-1-10F10-ft long extension
RL-ACC-SLIM-1-20F20-ft long extension
2
INC
H
LE
D
RE
TR
OF
IT
MO
DU
LE
RL173 LED1” GIMBAL LED FIXTURE WITH REFLECTOR
2-1/2”
1-5/8”
442
2”
I S S U E 1 5 G 2 1 R e v . 0 . 1
WWW.IUSEELITE.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333
S H I P P I N G AVA I L A B L E
1” GIMBAL LED FIXTURE WITH REFLECTORw 1-5/8” THICK LED FIXTURE WITH HIGHER BRIGHTNESSw FOR NEW CONSTRUCTION – INSULATED AND DROPPED CEILINGS
w FEATURES1” fixtures with integral LEDs. Isolated external driver factory installed inside junction box.One driver for every fixture required. PF>0.98.
w Cast aluminum trim
w Dimmable
w ETL approved and Energy Star Certified
w Type IC Rated – Approved for direct contact with insulation
w Air-tight and damp location approved
w Fast and easy to install in limited space locations
w External driver factory mounted inside connection box - 120V
w New construction rough-in plates and jumper cables available
w Available Temperatures (3000K, 3500K and 4000K)
w 50,000 Hours Life; 5 Year Warranty
TECHNICAL SPECIFICATIONS
w WATTAGES: 5W
w OUTPUT: Default Driver Voltage: 120V AC 60 Hz (Dimmable)
w CRI: 90+
w AMBIENT TEMPERATURE: -40°F (-40°C) to +104°F (+40°C)
w ADJUSTABLE: 30º tilt and 360º rotation
CERTIFICATIONS• ETL listed• ENERGY STAR
INSTALLATION
• Cut hole in ceiling and snap fixture in opening with attached spring clips. Space in ceiling needed for the driver to fit through the ceiling height – 3".
360DIMENSION
INPUT VOLT. INPUT FREQ. THD POWER FACTOR INPUT POWER LUMENS
120 60Hz <20% >0.98 5W(+/-5%) 360L
12-7/8”
2-3/4”
1-3/4”
2”
TYPE LUMEN CCT CRI FINISH ACCESSORIES
RL173 o 360L-DIMTR-120 o 30Ko 35Ko 40K
90+ WH o RL-ACC-SLIM-1-10Fo RL-ACC-SLIM-1-20F
EXAMPLE: RL173-360L-DIMTR-120-30K-90-WH
RL-ACC-SLIM-1-10F10-ft long extension
RL-ACC-SLIM-1-20F20-ft long extension
2
INC
H
LE
D
RE
TR
OF
IT
MO
DU
LE
RL173 LED1” GIMBAL LED FIXTURE WITH REFLECTOR
2-1/2”
1-5/8”
RL-ACC-SLIM-4-ROUGHPLATERough-in plate for use with 4” downlights
15-1/8” 13-1/8”
3-7/8”
3-3/4”
7-3/4”
6” Opening 5” Opening 4” Opening
RL-UNV-4/5/6For use with: 4”, 5”, 6”
Universal mounting plate
Due to the changes of constant improvement in LED technology, all details are subject to change without notice. Consult factory for up to date information. w w w . i u s e e l i t e . c o m
4”4 Inch Square Slim LEDRL476
RL476-700L-DIMTR-120-30K-90-WH TEST NO.: EL011857INPUT WATTS: 11.4 LUMENS: 772 CRI: 90 EFFICACY: 68 CCT: 3000K SPACING CRITERIA: 1.28
RL476-550L-DIMTR-120-30K-90-WH TEST NO.: EL08051925INPUT WATTS: 8.70165 LUMENS: 521 CRI: 90 EFFICACY: 60 CCT: 300K SPACING CRITERIA: 1.18
Candle Power Distribution (Candelas)
Candle Power Distribution (Candelas)
RC - Ceiling Cavity Reflectance RW - Wall Reflectance
RC - Ceiling Cavity Reflectance RW - Wall Reflectance
RO
OM
CA
VITY
RA
TIO
RO
OM
CA
VITY
RA
TIO
Coefficients of Utilization - Zonal Cavity MethodEffective Floor Cavity Reflectance 0.20
Coefficients of Utilization - Zonal Cavity MethodEffective Floor Cavity Reflectance 0.20
Zonal Lumens Summary
Zonal Lumens Summary
0Candela Tabulation
0Candela Tabulation
Lumens Per Zone
Lumens Per Zone
Zone Lumens
0-10 26.5010-20 72.8320-30 101.9930-40 109.6740-50 97.3250-60 70.0160-70 35.4870-80 7.1780-90 0.03
Zone Lumens
0-10 26.5010-20 72.8320-30 101.9930-40 109.6740-50 97.3250-60 70.0160-70 35.4870-80 7.1780-90 0.03
Luminance (Average candela/M2)Anglein Degrees
Average0º
Average45º
Average90º
45 652 661 66555 504 517 52165 319 337 34175 97 115 11585 1 1 1
Luminance (Average candela/M2)Anglein Degrees
Average0º
Average45º
Average90º
45 652 661 66555 504 517 52165 319 337 34175 97 115 11585 1 1 1
0 282.675 280.1415 258.8925 221.9335 175.9545 127.0955 79.6465 37.1975 6.9385 0.0290 0.02
0 282.675 280.1415 258.8925 221.9335 175.9545 127.0955 79.6465 37.1975 6.9385 0.0290 0.02
RC 80% 70% 50% 30% 10% 0%
RW 70% 50% 30% 10% 70% 50% 30% 10% 50% 30% 10% 50% 30% 10% 50% 30% 10% 0%
0 119 119 119 119 116 116 116 116 111 111 111 106 106 106 102 102 102 1001 111 108 104 101 109 105 102 100 101 99 96 97 95 94 94 92 91 892 103 96 91 86 101 95 89 85 91 87 83 88 84 81 85 82 80 783 95 86 80 74 93 85 79 74 82 77 72 79 75 71 77 73 70 684 88 78 70 65 86 77 70 64 74 68 63 72 67 63 70 65 62 605 82 71 63 57 80 70 62 57 67 61 56 66 60 55 64 59 55 536 76 64 56 51 74 63 56 50 62 55 50 60 54 50 59 53 49 477 71 59 51 45 69 58 51 45 57 50 45 55 49 45 54 49 44 438 66 54 46 41 65 53 46 41 52 46 41 51 45 41 50 44 40 399 62 50 42 37 61 49 42 37 48 42 37 47 41 37 46 41 37 35
10 59 46 39 34 57 46 39 34 45 39 34 44 38 34 43 38 34 32
RC 80% 70% 50% 30% 10% 0%
RW 70% 50% 30% 10% 70% 50% 30% 10% 50% 30% 10% 50% 30% 10% 50% 30% 10% 0%
0 119 119 119 119 116 116 116 116 111 111 111 106 106 106 102 102 102 1001 111 108 104 101 109 105 102 100 101 99 96 97 95 94 94 92 91 892 103 96 91 86 101 95 89 85 91 87 83 88 84 81 85 82 80 783 95 86 80 74 93 85 79 74 82 77 72 79 75 71 77 73 70 684 88 78 70 65 86 77 70 64 74 68 63 72 67 63 70 65 62 605 82 71 63 57 80 70 62 57 67 61 56 66 60 55 64 59 55 536 76 64 56 51 74 63 56 50 62 55 50 60 54 50 59 53 49 477 71 59 51 45 69 58 51 45 57 50 45 55 49 45 54 49 44 438 66 54 46 41 65 53 46 41 52 46 41 51 45 41 50 44 40 399 62 50 42 37 61 49 42 37 48 42 37 47 41 37 46 41 37 35
10 59 46 39 34 57 46 39 34 45 39 34 44 38 34 43 38 34 32
Zone Lumens %Lamp %Fixt
0-20 99.33 19.00 19.000-30 201.32 38.60 38.600-40 310.99 59.60 59.600-60 478.32 91.70 91.700-80 520.98 99.90 99.900-90 521.00 99.90 99.90
Zone Lumens %Lamp %Fixt
0-20 99.33 19.00 19.000-30 201.32 38.60 38.600-40 310.99 59.60 59.600-60 478.32 91.70 91.700-80 520.98 99.90 99.900-90 521.00 99.90 99.90
71
142
212
283
71
142
212
283
90º
80º
70º
60º
50º
40º
30º 20º
10º
90º
80º
70º
60º
50º
40º
30º 20º
10º
Cone of Light
BEAM DIA. MEASURED AT 50% OF NADIR F.C.
(FT.)Distance to Plane
(FC.) Initial Footcandle
at Nadir(FT.) Beam
Vert. Spread(FT.) Beam
Horiz. Spread
2 80.3 4.6 4.6
4 20.1 9.2 9.4
6 8.92 13.9 14.1
8 5.02 18.5 18.8
10 3.21 23.1 23.5
12 2.23 27.7 28.2
Cone of Light
BEAM DIA. MEASURED AT 50% OF NADIR F.C.
(FT.)Distance to Plane
(FC.) Initial Footcandle
at Nadir(FT.) Beam
Vert. Spread(FT.) Beam
Horiz. Spread
2 70.7 3.6 3.6
4 17.7 7.2 7.2
6 7.85 10.8 10.8
8 4.42 14.4 14.4
10 2.83 18 18
12 1.96 21.6 21.6