4
LDB LUMENTALK DATA BRIDGE Specification Sheet NK - R4 1/4 2016.07.08 5-year limited warranty. Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales. © Copyright Lumenpulse 2016 1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6 1.877.937.3003 P.514.937.3003 F. 514.937.6289 [email protected] www.lumenpulse.com Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately. FEATURES AND BENEFITS TOP VIEW FRONT VIEW SIDE VIEW For 4x 1/4-20 UNC (M6) screws 6 11 16 " [169mm] 16 3 9 " [91mm] 7 1 8 " [180mm] 16 6 5 " [160mm] 5 5 16 " [135mm] *Strain relief connectors and cables by others. *1/2" NPT hole plugs included for use with UL listed watertight strain relief connectors by others Seal all possible water entry points with RTV silcone (pressure glands, conduit). Sealing compound by others. Physical • Die-cast aluminum enclosure Two compartments: base for connections and cover for electronics Wall partition for separation of circuits Hinged cover with safety cables Electro-statically applied polyester powder coat finish Power input, 1/2’’ provision holes for 1/2” NPT, PG16 or 20mm One output, 1/2’’ provision hole for 1/2” NPT, PG16 or 20mm Mounting detail on the bottom of the box Startup temperatures: -25°C to 85°C [-13F to 185F] Operating temperatures: -25°C to 50°C [-13F to 122F] Storage temperatures: -40°C to 85°C [-40F to 185F] Weight: 1.70 kg / 3.75 lbs Suitable for indoor and outdoor applications, IP66 Corrosion-resistant coating for marine environments Electrical • 100-277V input Input through Lumentalk control system: 0-10V Sink, ELV, Triac and DMX Output: 0-10V source signal Client Project name Order# Type Qty

FEATURES AND BENEFITS - Lumenpulseappv1.lumenpulse.com/_files/products/...data_bridge_ldb_spec_sheet.pdf · LDB™ LUMENTALK DATA BRIDGE pecification heet NK - R4 1/4 21.07.08 year

  • Upload
    buikiet

  • View
    219

  • Download
    0

Embed Size (px)

Citation preview

LDB™

LUMENTALK DATA BRIDGE

Specification Sheet

NK - R4

1/4

2016.07.08

5-year limited warranty.

Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.

© Copyright Lumenpulse 2016

1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6

1.877.937.3003 P.514.937.3003 F. [email protected]

Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.

FEATURES AND BENEFITS

TOP VIEW

FRONT VIEW SIDE VIEW

For 4x 1/4-20 UNC(M6) screws

61116 "

[169mm]

16

39

"[91mm]

718 "

[180mm]

1665

"[160mm]

55

16 "[135mm]

*Strain relief connectors and cables by others.

*1/2" NPT hole plugs includedfor use with UL listed watertight

strain relief connectors by others

Seal all possible water entry points with RTV silcone (pressure glands, conduit).

Sealing compound by others.

Physical• Die-cast aluminum enclosure• Two compartments: base for connections and cover for electronics• Wall partition for separation of circuits• Hinged cover with safety cables •  Electro-statically applied polyester powder coat finish• Power input, 1/2’’ provision holes for 1/2” NPT, PG16 or 20mm• One output, 1/2’’ provision hole for 1/2” NPT, PG16 or 20mm• Mounting detail on the bottom of the box• Startup temperatures: -25°C to 85°C [-13F to 185F]• Operating temperatures: -25°C to 50°C [-13F to 122F]• Storage temperatures: -40°C to 85°C [-40F to 185F]• Weight: 1.70 kg / 3.75 lbs• Suitable for indoor and outdoor applications, IP66• Corrosion-resistant coating for marine environments

Electrical• 100-277V input• Input through Lumentalk control system: 0-10V Sink, ELV, Triac and DMX• Output: 0-10V source signal

Client Project name

Order# Type Qty

LDB™

LUMENTALK DATA BRIDGE

Specification Sheet

NK - R4

2/4

2016.07.08

5-year limited warranty.

Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.

© Copyright Lumenpulse 2016

1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6

1.877.937.3003 P.514.937.3003 F. [email protected]

Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.

516

"[135mm]

TYPICAL MOUNTING DETAIL ON THE BOTTOM OF THE BOX

5

65

16 "[160mm]

100-277V INPUT(DATA FROM LUMENTALK

CONTROL SYSTEM,IN FROM

POWERLINE)

TOOL FORCONNECTOR OPERATION

MOUNTING DETAIL

OUTPUT0-10V (SOURCE SIGNAL)TO DIMMING FIXTURE

TYPICAL LAYOUT

LDB™

LUMENTALK DATA BRIDGE

Specification Sheet

NK - R4

3/4

2016.07.08

5-year limited warranty.

Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.

© Copyright Lumenpulse 2016

1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6

1.877.937.3003 P.514.937.3003 F. [email protected]

Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.

Lumentalk Data Bridge

0-10V Dimmer(SINK)

0-10VLumentranslator

OUTPUT TODIMMING FIXTURE0-10V (SOURCE SIGNAL)LINE INPUT

(TO MATCH FIXTURE SPECIFIED VOLTAGE)

TYPICAL WIRING DIAGRAM

LDB™

LUMENTALK DATA BRIDGE

Specification Sheet

NK - R4

4/4

2016.07.08

5-year limited warranty.

Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.

© Copyright Lumenpulse 2016

1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6

1.877.937.3003 P.514.937.3003 F. [email protected]

Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.

1

Housing:LDB - Lumentalk Data Bridge box enablingcompatibility with ELV, TRIAC, 0-10V Sink andDMX control signals

2

Finish: BK - Black SandtexSI - Silver SandtexWH - Smooth whiteCC - Custom color and finish (please specify RAL color)1

HOW TO ORDER

LDB 1 2

Notes:1  North American RAL colors specified with RAL number only are provided with a smooth/high-gloss finish. Please consult factory for other RAL textures and glosses, or to match alternate colorcharts. Final color matching results may vary.