Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
The ACON WAP-102S offers Gigabit Ethernet ports and supports IEEE 802.11a/b/g/n/ac dual band standards (2.4GHz 2T2R,5GHz 1T1R). It provides the wireless speed up to 300+433Mbps (2.4GHz+5GHz). Compared with the general wireless APs, ACON WAP-102S offers faster transmission speed for the network applications and less interference to enhance data throughput. This makes it ideals for hotels, schools, hospitals, clubs and homes.
Hardware
Item Description
Switch
LED
Ethernet
Power
Power Consumption
Dimension (WxDxH)
Weight
•Complies with IEEE 802.11a/b/g/n/ac standard•Compact sleek design that fits standard wall plate•Simple and easy installation•Supports up to 8 SSID
•Dual Gigabit wired network interface, providing high performance broadband access •Advanced security features, including WEP, WPA, WPA2, IEEE802.1x, MAC filtering•Powered by standard 802.3af PoE
Features
Specifications
Power switch
Reset
Power
WAN
LAN
5G
2.4G
LAN 10/100/1000 Base-T, RJ45x1
Auto-Negotiation / Auto MDI/MDI-X
WAN 10/100/1000 Base-T, RJ45x1
Auto-Negotiation / Auto MDI/MDI-X
Wireless, IEEE 802.11a/b/g/n/ac
Antenna 802.11n 2x2 , 802.11ac 1x1
PoE 802.3af (Rear LAN RJ45 x1)
5~15W
45mm x 43mm x 94mm
150g
Specification are subject to change without notice. ACON logo is a registered trademark of ADVANCED-CONNECTEK INC. and its overseas subsidiaries. All other trademarks mentioned herein belong to their respective owners. ©2016 ADVANCED-CONNECTEK INC. All rights reserved.No.2, Alley 9, Lane 45, Baoxing Rd., Xindian Dist., New Taipei City, Taiwan E-mail: [email protected] www.acon.com Updated on May10, 2016
WAP-102S ACON 802.11ac dual band In-Wall AP
ACON WAP-102S802.11ac dual band In-Wall AP
2.4GHz : 802.11b/g/n
5GHz : 802.11a/ac
2.4GHz : 13ch
5GHz : W52/W53/W56
2.4GHz : 2x2
5GHz : 1x1
2.4GHz : 2x2 40MHz : 300Mbps
5GHz : 1x1 80MHz : 433Mbps
WEP (64/128bit)
WPA-PSK (AES/TKIP)
WPA2-PSK (AES/TKIP)
WPA/WPA2-PSK (AES/TKIP)/WPA2-EAP (AES/TKIP)
up to 8
Router / AP Switchable (Software Setting)
Static IP (Manual Setting)
DHCP Client Setting
PPPoE Client Setting
Static IP (Manual Setting)
DHCP Server
uPnP
IPv6 pass through
MAC Address Filtering (Wireless)
IP Filtering
TCP/UDP Filtering
Port No. Filtering
URL Filtering
DDNS
Remote WAN Configuration
(Web Management GUI Access enable)
Ping Filtering
SYN Flooding Filtering
802.1x RADIUS Client (Wireless)
Static Route
Downstream speed control
Upstream speed control
Management
F/W upgrade
save / restore
System Log
SOCKET SSID OID
VCCI Class B, TELEC
0°C~40°C
-20°C~80°C
5%~95%
Spec
Frequency Channel
Antenna
Speed
Security
Multi SSID
Mode
WAN Port
LAN Port
IPv6
Firewall
Router
QoS
Web
Config management
Log
Remote management
-
Operating temperature
Storage temperature
Humidity
Wi-Fi
Software
EMI
Environment
Ordering Information