Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
User’s Manual
1 © All rights reserved by Rosewill
User’s ManualFBM-01CASE
Contents
Opening Chassis P.4
Installing Motherboard P.5
Installing Power Supply P.4
Disassemble Chart P.2
Accessory Box P.3
Installing 3.5” HDD
Installing External 5.25" Device P.7
Installing External 3.5" Device P.8
P.8
P.2
Installation Guide
Information P.9
P.6
Product Overview
Installing Add On Card
2 © All rights reserved by Rosewill
User’s ManualFBM-01CASE
Front I/O Pin DefineUSB 2.0 CONNECTOR HD CONNECTORAC97 CONNECTOR
PinPin
MIC
AUD GND
RET~R
RET~L
MIC
MIC~BIAA
FPOUT~R
+5V
FPOUT~L
Pin
AUD GND
PRESENCE#
SENSE1_RETURN
SENSE2_RETURN
PORT1L
PORT1R
PORT2R
SENSE_SEND
PORT2L
Pin
Disassemble Chart
Front PanelLeft Side Panel
Right Side PanelRear 80mm Fan
Front 120mm Fan
3 © All rights reserved by Rosewill
User’s ManualFBM-01CASE
Accessory Box
6 x M/B standoff Motherboard
8 x Screw A Power SupplyAdd-on Card
18 x Screw CMotherboard5.25” Device
Floppy
8 x Screw B 3.5” HDD
1 x PC SPEAKER Motherboard
4 © All rights reserved by Rosewill
User’s ManualFBM-01CASE
Unscrew to remove left and right panel.
Place the power supply from the left side into the chassis and secure with screws.
1
2
1.
2.
Installation Guide
5 © All rights reserved by Rosewill
User’s ManualFBM-01CASE
Installation Guide
3.
-Place the motherboard onto stand-offs and secure with screws.
-Install motherboard stand-offs according to your motherboard’s screw holes.
© All rights reserved by Rosewill
User’s ManualFBM-01CASE
6
Installation Guide
1
2
-Install the add-on card and secure with screws.
-Confirm which slot you want to install an add-on card then fracture the slot cover with your screwdriver.
4.
User’s ManualFBM-01CASE
7 © All rights reserved by Rosewill
Installation Guide
5.
6.
-Pull to remove the front panel.-Confirm which bay you want to install device(S) then remove the bay cover.-Reinstall the front panel.
-Insert the 5.25” device from the front apnel into the chassis then secure with screws.
8 © All rights reserved by Rosewill
User’s ManualFBM-01CASE
Installation Guide
Insert the external 3.5” device into its position from front panel and secure with screws.
Insert the 3.5” HDD into its position from inside and secure with screws.
7.
8.
9 © All rights reserved by Rosewill
User’s ManualFBM-01CASE
Installation Guide
Make sure all necessary cables and wires are connected, then reinstall side panels and secure with screws.
Thank you for purchasing a High-Quality Rosewill Product.
Please register your product at : http://www.rosewill.comfor complete warranty information and future support for your product.
If you have any question while using our products, please visit our website : www.rosewill.com for latest driver & user manual or feel free to contact us.
Support Phone Number: 800-575-9885
Support Email: [email protected]
12
9.
FBM-01_Usermanual_CoverFBM-01_Usermanual_P01FBM-01_Usermanual_P02FBM-01_Usermanual_P03FBM-01_Usermanual_P04FBM-01_Usermanual_P05FBM-01_Usermanual_P06FBM-01_Usermanual_P07FBM-01_Usermanual_P08FBM-01_Usermanual_P09FBM-01_Usermanual_Back