Upload
nguyenanh
View
218
Download
4
Embed Size (px)
Citation preview
F A S T E N E R S
Product information updated May 2017 and subject to change. Please click the product links for prices and availability.
M
A/F
DkH L
MaterialA2 Stainless Steel. Also available in A4 Stainless Steel, P.O.A. Nominal screws are threaded within 2.5 thread pitches of the head. Maximum Operating Temperature: +430°C.
Socket Head Button ScrewsStainless Steel : ISO 7380 - A2 : M3 - M12
BM
BM3-6BM3-8BM3-10BM3-12BM3-16BM4-6BM4-8BM4-10BM4-12BM4-16BM4-20BM4-25BM5-8BM5-10BM5-12BM5-16BM5-20BM5-25BM5-30BM5-35BM5-40BM5-50BM6-10BM6-12BM6-16BM6-20BM6-25BM6-30
M3M3M3M3M3M4M4M4M4M4M4M4M5M5M5M5M5M5M5M5M5M5M6M6M6M6M6M6
68
101216
68
1012162025
8101216202530354050101216202530
5.75.75.75.75.77.67.67.67.67.67.67.69.59.59.59.59.59.59.59.59.59.5
10.510.510.510.510.510.5
1.651.651.651.651.652.202.202.202.202.202.202.202.752.752.752.752.752.752.752.752.752.753.303.303.303.303.303.30
2.02.02.02.02.02.52.52.52.52.52.52.53.03.03.03.03.03.03.03.03.03.04.04.04.04.04.04.0
PartNumber
ThreadM L Dk H A/F
BM8-12BM8-16BM8-20BM8-25BM8-30BM8-40BM8-50BM8-60BM8-70BM10-16BM10-20BM10-25BM10-30BM10-35BM10-40BM10-50BM12-20BM12-25BM12-30BM12-35BM12-40BM12-50BM12-60
M8M8M8M8M8M8M8M8M8M10M10M10M10M10M10M10M12M12M12M12M12M12M12
1216202530405060701620253035405020253035405060
14.014.014.014.014.014.014.014.014.017.517.517.517.517.517.517.521.021.021.021.021.021.021.0
4.404.404.404.404.404.404.404.404.405.505.505.505.505.505.505.506.606.606.606.606.606.606.60
5.05.05.05.05.05.05.05.05.06.06.06.06.06.06.06.08.08.08.08.08.08.08.0
PartNumber
ThreadM L Dk H A/F
F A S T E N E R S
Product information updated May 2017 and subject to change. Please click the product links for prices and availability.
MaterialTB340C (Grade 2 Titanium).SNPTG High intensity Titanium Alloy - Ti-15-3-3-3 (β Titanium) - available, P.O.A.Specific Gravity: 4.51.Melting Point: 1668°C. Longitudinal Elastic Modulus: 106 GPa.Thermal Conductivity: 17.16 W/(m•K).Linear Expansion Coefficient: 8.4 x 10-6 °K-1.Electrical Resistance: 0.55 µΩ•m.Amplitude Permeability:1.0001µ (Nonmagnetic).Tensile Strength: 270-410 N/mm2.0.2% Proof Stress: 165 (or higher) N/mm2.Elongation: 27% (or higher).* The Tensile Breaking Force values listed are for reference only and are not guaranteed under performance conditions.
Features• The specific gravity of titanium is approximately 60% that of stainless steel.
For use in lightweight applications, e.g. automotive, aerospace, medical and robotics.• Completely Nonmagnetic (0 Magnetic Flux Density). Nonmagnetic characteristics may be used with FPD (Flat Panel Display) and semiconductor production equipment and devices, and electronic equipment.• Excellent chemical and seawater resistance for electrochemical plating and
aquatic applications.• Chemical polishing and brightening processing improve the screw surface. Furthermore, the screws are cleanroom washed, cleanroom packed, and comply
with clean specifications that require no oil or foreign matter deposits.• For information on chemical resistance test details please contact Sales.
Cross Recessed Pan Head Machine ScrewsTitanium : M2 - M5
SNPT
SNPT-M2X5SNPT-M2X6SNPT-M2X8SNPT-M2X10SNPT-M2.5X5SNPT-M2.5X6SNPT-M2.5X8SNPT-M2.5X10SNPT-M2.5X12SNPT-M3X6SNPT-M3X8SNPT-M3X10SNPT-M3X12SNPT-M3X16SNPT-M3X20SNPT-M4X6SNPT-M4X8SNPT-M4X10SNPT-M4X12SNPT-M4X16SNPT-M4X20SNPT-M4X25SNPT-M5X8SNPT-M5X10SNPT-M5X12SNPT-M5X16SNPT-M5X20SNPT-M5X25SNPT-M5X30
M2M2M2M2M2.5M2.5M2.5M2.5M2.5M3M3M3M3M3M3M4M4M4M4M4M4M4M5M5M5M5M5M5M5
568
10568
1012
68
10121620
68
1012162025
8101216202530
3.53.53.53.54.54.54.54.54.55.55.55.55.55.55.57.07.07.07.07.07.07.09.09.09.09.09.09.09.0
1.31.31.31.31.71.71.71.71.72.02.02.02.02.02.02.62.62.62.62.62.62.63.33.33.33.33.33.33.3
840840840840
1,3801,3801,3801,3801,3802,3602,3602,3602,3602,3602,3604,1204,1204,1204,1204,1204,1204,1206,6706,6706,6706,6706,6706,6706,670
0.30.30.30.30.50.50.50.50.51.01.01.01.01.01.02.42.42.42.42.42.42.45.15.15.15.15.15.15.1
0.090.100.120.140.170.190.230.270.300.310.350.400.440.540.630.590.680.770.861.001.201.401.301.401.501.802.102.402.80
PartNumber
ThreadM L Dk H
TensileBreaking
Force* (N)
Tightening Torque
NmMass
g
M
LH
Dk
F A S T E N E R S
Product information updated May 2017 and subject to change. Please click the product links for prices and availability.
Cross Recessed Pan Head Machine ScrewsPEEK† : M1.7 - M3
SPE-P
SPE-M1.7X4-PSPE-M2X4-PSPE-M2X5-PSPE-M2X6-PSPE-M2X8-PSPE-M2X10-PSPE-M2X12-PSPE-M2.6X6-PSPE-M2.6X8-PSPE-M2.6X10-PSPE-M2.6X12-PSPE-M3X5-PSPE-M3X6-PSPE-M3X8-PSPE-M3X10-PSPE-M3X12-PSPE-M3X15-PSPE-M3X16-PSPE-M3X20-PSPE-M3X25-P
M1.7M2M2M2M2M2M2M2.6M2.6M2.6M2.6M3M3M3M3M3M3M3M3M3
44568
1012
68
1012
568
101215162025
2.53.53.53.53.53.53.54.54.54.54.55.55.55.55.55.55.55.55.55.5
0.51.31.31.31.31.31.31.71.71.71.72.02.02.02.02.02.02.02.02.0
59160160160160160160312312312312430430430430430430430430430
0.020.060.060.060.060.060.060.160.160.160.160.300.300.300.300.300.300.300.300.30
2020202020202020202020202020202020202020
PartNumber
ThreadM L Dk H
TensileBreaking
Force* (N)
Torsional Breaking
Torque* (Nm)
Quantityper
Pack
M
LH
Dk
MaterialPEEK (Polyetheretherketone), light brown. †PEEK is a registered trademark of Vitre™.Heat Resistance Temperature: 180°C. This is the value for the plastic material. The maximum operating temperature of the product changes with performance conditions such as tightening torque.* Numerical values listed above are for reference only; they are not guaranteed under performance conditions. The recommended torque is 50% of the numerical values.
Precautions for UseBecause a cumulative pitch difference is created when PEEK screws are manufactured, use these screws with nuts. If a nut is not used, use a 20 mm or less fit with female thread.
Features• PEEK is a thermoplastic super-engineering plastic with excellent physical and
chemical properties.• These screws have excellent chemical resistance. They are mostly unaffected by
chemicals excluding concentrated sulfuric acid, concentrated nitric acid, and concentrated hydrofluoric acid.
• These screws have excellent heat resistance, water resistance, and high heat resistance strength.
• These screws have excellent abrasion, shock, and fatigue resistance.• They have high incombustibility that meets V-0 of UL 94.
ApplicationsFPD production equipment, semiconductor devices, PCB etching devices, metallic surface treatment equipment and facilities, chemical plants, transformers, electrical and electronic equipment, hot water pumps, and chemical pumps.
F A S T E N E R S
Product information updated May 2017 and subject to change. Please click the product links for prices and availability.
Cross Recessed Pan Head Machine ScrewsPEEK† : M4 - M8
SPE-P
M
LH
Dk
MaterialPEEK (Polyetheretherketone), light brown. †PEEK is a registered trademark of Vitre™.Heat Resistance Temperature: 180°C. This is the value for the plastic material. The maximum operating temperature of the product changes with performance conditions such as tightening torque.* Numerical values listed above are for reference only; they are not guaranteed under performance conditions. The recommended torque is 50% of the numerical values.
Precautions for UseBecause a cumulative pitch difference is created when PEEK screws are manufactured, use these screws with nuts. If a nut is not used, use a 20 mm or less fit with female thread.
Features• PEEK is a thermoplastic super-engineering plastic with excellent physical and
chemical properties.• These screws have excellent chemical resistance. They are mostly unaffected by
chemicals excluding concentrated sulfuric acid, concentrated nitric acid, and concentrated hydrofluoric acid.
• These screws have excellent heat resistance, water resistance, and high heat resistance strength.
• These screws have excellent abrasion, shock, and fatigue resistance.• They have high incombustibility that meets V-0 of UL 94.
ApplicationsFPD production equipment, semiconductor devices, PCB etching devices, metallic surface treatment equipment and facilities, chemical plants, transformers, electrical and electronic equipment, hot water pumps, and chemical pumps.
SPE-M4X6-PSPE-M4X8-PSPE-M4X10-PSPE-M4X12-PSPE-M4X15-PSPE-M4X16-PSPE-M4X20-PSPE-M4X25-PSPE-M4X30-PSPE-M5X8-PSPE-M5X10-PSPE-M5X12-PSPE-M5X15-PSPE-M5X16-PSPE-M5X20-PSPE-M5X25-PSPE-M5X30-PSPE-M6X10-PSPE-M6X12-PSPE-M6X15-PSPE-M6X20-PSPE-M6X25-PSPE-M6X30-PSPE-M8X15-PSPE-M8X20-PSPE-M8X30-P
M4M4M4M4M4M4M4M4M4M5M5M5M5M5M5M5M5M6M6M6M6M6M6M8M8M8
6 810121516202530 810121516202530101215202530152030
7.07.07.07.07.07.07.07.07.09.09.09.09.09.09.09.09.0
10.510.510.510.510.510.514.014.014.0
2.62.62.62.62.62.62.62.62.63.33.33.33.33.33.33.33.33.93.93.93.93.93.95.25.25.2
765765765765765765765765765
1,2301,2301,2301,2301,2301,2301,2301,2301,6701,6701,6701,6701,6701,6703,0903,0903,090
0.640.640.640.640.640.640.640.640.641.281.281.281.281.281.281.281.282.262.262.262.262.262.265.985.985.98
2020202020202020201010101010101010101010101010 5 5 5
PartNumber
ThreadM L Dk H
TensileBreaking
Force* (N)
Torsional Breaking
Torque* (Nm)
Quantityper
Pack
F A S T E N E R S
Product information updated May 2017 and subject to change. Please click the product links for prices and availability.
Hexagon Head Machine ScrewsPEEK† : M4 - M10
SPE-H
H
M
L A/F
L1
MaterialPEEK (Polyetheretherketone), light brown. †PEEK is a registered trademark of Vitre™.Heat Resistance Temperature: 180°C. This is the value for the plastic material. The maximum operating temperature of the product changes with performance conditions such as tightening torque.* Numerical values listed above are for reference only; they are not guaranteed under performance conditions. The recommended torque is 50% of the numerical values.
Precautions for UseBecause a cumulative pitch difference is created when PEEK screws are manufactured, use these screws with nuts. If a nut is not used, use a 20 mm or less fit with female thread.
Features• PEEK is a thermoplastic super-engineering plastic with excellent physical and
chemical properties.• These screws have excellent chemical resistance. They are mostly unaffected by
chemicals excluding concentrated sulfuric acid, concentrated nitric acid, and concentrated hydrofluoric acid.
• These screws have excellent heat resistance, water resistance, and high heat resistance strength.
• These screws have excellent abrasion, shock, and fatigue resistance.• They have high incombustibility that meets V-0 of UL 94.
ApplicationsFPD production equipment, semiconductor devices, PCB etching devices, metallic surface treatment equipment and facilities, chemical plants, transformers, electrical and electronic equipment, hot water pumps, and chemical pumps.
SPE-M4X8-HSPE-M4X10-HSPE-M4X15-HSPE-M4X20-HSPE-M4X25-HSPE-M5X10-HSPE-M5X15-HSPE-M5X20-HSPE-M5X25-HSPE-M5X30-HSPE-M6X10-HSPE-M6X12-HSPE-M6X15-HSPE-M6X20-HSPE-M6X25-HSPE-M6X30-HSPE-M6X35-HSPE-M6X40-HSPE-M8X10-HSPE-M8X15-HSPE-M8X20-HSPE-M8X25-HSPE-M8X30-HSPE-M8X40-HSPE-M8X50-HSPE-M10X20-HSPE-M10X25-HSPE-M10X30-H
M4M4M4M4M4M5M5M5M5M5M6M6M6M6M6M6M6M6M8M8M8M8M8M8M8M10M10M10
8101520251015202530101215202530354010152025304050202530
7777788888
101010101010101013131313131313171717
2.82.82.82.82.83.53.53.53.53.54.04.04.04.04.04.04.04.05.55.55.55.55.55.55.57.07.07.0
Full ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull Thread
27Full ThreadFull ThreadFull Thread
765765765765765
1,2301,2301,2301,2301,2301,6701,6701,6701,6701,6701,6701,6701,6703,0903,0903,0903,0903,0903,0903,0904,9004,9004,900
0.640.640.640.640.641.281.281.281.281.282.262.262.262.262.262.262.262.265.985.985.985.985.985.985.98
10.8010.8010.80
0.260.290.360.420.480.460.590.670.780.880.750.810.931.001.201.301.501.601.601.902.102.402.803.404.104.004.404.80
101010101010101010101010101010101010 5 5 5 5 5 5 5 1 1 1
PartNumber
ThreadM L A/F H L1
Tensile Breaking
Force* (N)
Torsional Breaking
Torque* (Nm)Mass
g
Quantityper
Pack