Fast-Form The Complete Formwork Solution

Safer / Faster / Greener / Sustainable 'One system, endless possibilities'

USA Distributor:

Fast-Form ™ the benefitsECONOMY: Faster than traditional timber forms or panel systems.

With no forms to make-up, just bolt down a Fast-Form ™ bracket with a single self-tapping concrete bolt / standard road pins or even wood screws!. Plumb it up and screw on your ply or with our aluminium wall system just lift our lightweight panels into place and prop. NO CRANES OR MACHINES NEEDED: Save Thousands of $ on equipment & labor costs.

Need handrails or access platforms? they are easily attached.

Our system will save you days or weeks on your program and thousands of $ in costs.

SAFETY: When timber forms / props are used, where are the structural calculations? How does the risk assessment cover there being no handrail or access? The simple answer is timber does not offer these and in real terms it is an unsafe method of working in most applications.

Fast-Form ™ helps you meet manual handling regulations as our brackets weigh from just 2 lbs with nothing weighing more than 44 lbs.

Do you have an excellent safety record that you want to keep? Then specify Fast-Form ™.

ENVIRONMENTAL: There is generally a lot of timber wastage with timber shutters and props. Fast-Form ™ can not only reduce timber usage, but with new plastic ply systems it can totally eliminate timber usage with fully recyclable materials that are much stronger and safer than timber products. There is not an endless supply of trees and timber use needs to be reduced.

Fast-Form ™ is lightweight with no mechanical lifting required, reduced transportation costs and your Carbon Footprint is also dramatically reduced. IT IS ALSO SUSTAINABLE.

The Carbon savings are between 60%-100% against traditional Panel and Timber formwork. Savings of up to 5 to 7 lbs of Carbon use for every ft2 of formwork cast can be achieved, see our website for more details on our Carbon Savings and Independent Carbon study.

KEY BENEFITS:

• SAFETY: Access & handrails, no crane required in most applications. lightweight system that can be liftted by hand

• SPEED: No make up, lightweight and easy to use system much faster than other methods

• COST: Less expensive than panel systems & timber with reduced labor and equipment costs, no waste skips required and little material waste

• ENVIROMENTAL: Little or no timber wastage and 100% fully recyclable materials, greatly reduced Carbon emmisions from not only our system but also reduced emmisions from deliveries

• NO KICKERS NEEDED FOR WALLS & FEWER TIE BARS: meaning less materials, less work, less holes and less concrete finishing, ideal for bunds, or water retaining structures & fair face finishes

• BESPOKE FORMWORK: As a designer and manufacturer we can provide a solution for almost anything, please see our Bespoke page for more details.

Fast-Form Bracket / Base System

Fast-Form TM is the only formwork system that can truly be erected by hand, with no part weighing more than 40 lbs ( Our largest 72'' bracket, our smallest 7'' weights just 2lbs).

The system is the fastest and easiest way to form bases / slabs (inc soffits) / walls / pits as well as sheet pile capping beams and much more. See our website gallery or 3D aimations pages for more details.

Can be fixed down with Rawl bolts into concrete / Road Pins into earth or wood screws on to soffits and decks.

Straight or radius pours and also complex shapes, our brackets bolt together to form almost any type or shape of pour and with standard and flexi corners anything is possible, bases beams, slab edge, walls & much more.

Just fix bracket down / plumb up & screw on ply from behind and pour, its so fast and easy to use with no make up of forms, no transport or storage of unwanted forms, just rent when you need them or buy them, with a 25 year lifespan they make a good investment.

The system also comes with optional full access and handrail system for safe working (As shown above) ideal for soffits, they can also form the slab edge protection with the optional handrail system.

Our unique system is so flexible they can be bolted together to form complex shapes such as slabs with plinths or for sheet pile capping beams / soffits and much more.

Save time and costs on Labor / Equipment & Reduce your Carbon Footprint.

Brackets fixed to deckingwith optional handrail

Brackets fixed to Earth or Compacted Fill

Brackets joined toform complex pours easily on one easypour

Fast-Form Bracket / Base SystemProduct Range:

7'' / 8'' / 16'' / 24'' / 32'' / 48'' & 72''

8'' & 24'' high corners 7'' / 8'' & 15'' wide

Fast-Form is the perfect solution for all types of sheet pile capping beam. The only complete solution for sheet pile capping beams in the World. Straight, curved or radius, level or sloping, one or two sided Fast-Form is the only system worldwide that can cope with everything from one system, even including the landside shutter.

We can design beams to any size and also offer a bespoke service so no matter how complex your beam, we can offer a solution to suit you needs and your budget.

We have options to fix to the sheets with bolts but also have an optional Magnet based fixing system.

Free design service, drawings, and calculations included, with a premium 3D drawings also available.

Unlike alternative methods Fast-Form not only forms the soffit of the sheet pile capping beam but also the shutters both sides with all supports. This means it is a complete solution for pouring sheet pile capping beams and there is no need to make and try to fix additional shutters. A complete working platform and handrails can also be fixed.

We offer a complete solution complete with temporary works drawings and structural calculations included.

From small sheet pile capping beams to very large sheet pile capping beams such as Littlehampton flood defence works where a 6ft high beam was cast to raise the flood defence levels, Fast-Form is flexible enough to cope with all types and sizes of capping beams, can be fitted to the pile with bolts or by magnets for a no drill solution.

Unlike other systems Fast-Form can work on any angle of pile, radius piles & different levels and sizes. Fast-Form can provide edge protection including a full working access platform with a handrail system.

Fast-Form needs no crane or mechanical lifting and in a lot of cases can be fitted from one side or from a cherry picker

.We will design your system for you and deliver everything to your site, our system is lightweight meaning transportation costs are greatly reduced, so is the overall carbon footprint of using the system.

Fast-Form is the only system on the market that forms the whole of the sheet pile capping beam and offers a complete solution to your needs. Why just rent a soffit system when you can have a complete solution that is quicker, more efficient, less expensive and reduces your Carbon Footprint.

Fast-Form Sheet Pile Capping System

Fast-Form ™ Curb Form Overview:

Our unique curb form is unlike any other form on the market and we offer rental & sales, the Fast Form curb form is most flexible & versatile form available.

Our forms can also work with the Fast Form bracket system to give the most stable curb form on the market, one that can be pinned with standard road pins, or fixed down with Fast Form brackets attached, they can also be fixed to decking with wood screws or to concrete blinding or slabs with re-usable, self tapping concrete bolts so what ever your ground conditions our forms can be fitted safely and securely.

No more battered / old / bent / rusty forms, choose the galvanized Fast Form curb form and get much more than just a curb form, get a curb form that can be turned into a slab edge formwork system and can be fixed to any type of ground or base, one that is lighter, stronger and more flexible, the best curb form on the market.

How many times have you hired a curb form to find it looks like a piece of bent scrap metal?

Fast Forms curb forms are galvanized steel ( we offer plain steel versions for sale as well), they are stronger than any other curb form, they are more flexible than any other road form because then can be joined on top of each other for larger pour heights and they join with bolts so no more loose connections.

They can also have ply fitted to the face, so if you wanted a fair face finish to a slab you can turn your curb form into a fair faced form for a slab edge, ideal for high rise slabs fixed to decking .

Our curb forms are available for rental or sale, if you buy our forms and need a few extra for a job just rent a few extra forms from us, or keep your costs low and just hire our curb forms for all your jobs.

Available in straight or Flexi versions. For more details visit www.roadforms.com

Fix to earth or hard-core: Fix to Concrete blinding or slabs: Fix to plywood decking and false-work:

Fast-Form ™ Curb Form Benefits: Benefits over other curb form systems:

• Made from Galvanized steel as standard they are stronger than any other curb form and will not rust and will out last any other curb form, also available as a standard Un-Galvanized form as a sale item only

(all our hire fleet is galvanized! for durability)

• Best Quality GUARANTEED!

• Straight or curved curb forms available in two heights: 7'' & 8'' high which can be joined, so we offer 7'' / 8'' / 14'' / 15'' / 16'' all the way all the way up to 6' high

• Fast Form Curb Forms come in 8' lengths the same as standard ply sheets and they can have ply fitted to the face for fair face work and this can also extend height by up to 4''

• Unique infil system also copes with any length so you don’t have to fly past your pour

• Optional 90 degree corner joining sections and an any angle Flexi Corner joining section make it unique for slab pours with solid corner joints that wont move

• Forms can be fitted with road form pins BUT also can have Fast Form Brackets fitted for extra stability and adjustment

• Forms can be joined end to end and are bolted together so no movement at joints, much stronger than any other form

• Forms can be joined on top as well, so a 7'' high form can be joined to make up to 6' high, no other curb form can be joined in this way turning it into a large pan shutter (when used with FF brackets)

• When used with the Fast Form brackets you can use the forms for slab edge formwork on decking as Fast Form brackets can be fixed down onto decking with wood screws.

• When using our Curb Forms with Fast Form brackets you can bolt them to concrete blinding and slabs as well as to plywood decks.

• Compatible with our other formwork bracket systems for a much safer and sturdier fixing solution to any surface

• Pins and road form pin pullers are also available for rental or sale

• The most cost effective curb form on the market

Fast-Form Wall Systems

Fast-Form TM is the only large wall formwork system that can truly be erected by hand, with no part weighing more than 44 lbs. No craneage or machine costs for lifting!

Our aluminium version can be simply lifted into place manually and another panel fixed to them. This is especially good for repetitive use and gives the only truly manageable panel system. A 4' x 8' panel weighing around 70 lbs complete! 2 men can easily pick it up and move it meaning vastly reduced labour costs and as with the standard steel system they can be joined for larger pour heights.

This means we are the system of choice for many basements where a wall formwork system is required but where a crane or mechanical lifting can not be used. System can also be moved like a large panel formwork system if required.

The system also comes with optional full access and handrail system for safe working.

The system is especially suitable for basements under existing properties as you can fit all of our system through a small window and erect it underneath. This is the reason we are the market leader in basement formwork systems.

Another benefit is the sizes we offer, unlike panel systems all our uprights can be mixed and matched so if you have a sloping wall you can start with one size of upright mix and match, even mixing or wall with our bracket system.

Our uprights come in 75'' / 95'' & 126'' BUT all can be joined so we can also supply up to 256''.

The system can also pour radius walls using the same components, simply omit the joining braces between uprights, generally faced with ply the system can also be faced with Alkus plastic ply for a truly GREEN solution..

The system can be erected and ply fitted after which means it is also very good when using water bars and need to make sure that the pour is very clean before you pour as you could fit the ply just before pouring.

Comes with drawings, fitting instructions and structural calculations included.

Main Benefits over Panel systems:

• Unlike an ordinary panel system the ply fits to the front of our system meaning there are hardly any joints at all, perfect for fair faced work

• Unique slot systems means tie bars will always match up

• Lighter than an ordinary panel system no component weighs more than 44lbs and NO Crane required and with the lightweight Aluminium version starting at just 8 lbs per piece!

• More flexible on size than an ordinary panel system and you can also pour radius walls with the SAME system

• Unlike ordinary panel systems there are not hundreds on components to lose & be charged for!

• No Crane costs / Lower Transport costs / Lower Carbon Footprint / Lower labor costs / Less make up costs / Faster stripping, the list goes on

• GREENER / FASTER / SAFER / SUSTAINABLE

Fast-Form Wall SystemProduct Range:

32'' / 75'' / 95'' & 126'' Heights ( can be joined)

8' x 4' / 8' x 2' / 4' x 4' / 4' x 2' Panels

Authorized US Distributors:

www.spec-west.com

UK / Europe & Worldwide Websites:

www.fastformsystems.comwww.fastformsystems.euwww.fastformsystems.nz

www.roadforms.com