Technical Data

Crank lifting system Lifting unit Connecting

tube Brake unit Deflection gear Deflection gear with brake unit

Ratio 1:1 ø 15 1:1 1:1

Stroke 500 mm

Recommended table load

0 – 40 kg

Retracted length 625 mm customized customized customized customized

Item number 3052.00-0002 3052.40- V01LXXXX

3052.09-V01AXXX

3052.00- V01AXXX

3052.00- V02AXXX

Fast crank lifting system 3052

DescriptionCrank lifting system for fast height adjustment of sit- stand workplaces. Mechanical synchro-nization of two spindle lift drives with crank, brake unit, deflection gear and connecting tube. The system is suitable for 2-leg table frames with high efficiency of the guide units. Convenient adjustment with up to 40 kg table loads is ensured. The lift of 500 mm meets the requirements of the new standard for sitting-standing workplaces.

Special featuresThe system consists of a modular design allowing trouble-free assembly of the table by the end customer.

Connecting tube and deflection gear are attached only during final assembly. This permits shipping the tables in the customary manner worldwide with minimum package dimensions.

Customer specificThe length of the connecting tube is adjusted indi- vidually, depending on the spacing of the table legs. The units can also be furnished with other spring forces.

Safety instuctionGas springs can develope high acceleration forces. Please handle the assembly and this disassembly with care and diligence.

Fast crank lifting system

Man

ual S

pind

le D

rives

3052

3052.75-02/20170619

3052.00-0002

Crank handle5187.00-0032

Brake unit3052.09-V01AXXX

Connecting tube3052.40-V01LXXXX

Deflection gear3052.00-V01AXXX

Fast crank lifting system 3052

3052.75-02/20170619Dimensions in mm

39,8

Inst

alla

tion

leng

th E

= 6

2550

0 (to

tal s

troke

)Plug-in crank 5187.00-0032

Brake 3052.09-V01AXXX

Adapter (optional) 3052.19-05

View Y

Y

Sheet metal frame (customized, on request)

Deflection gear 3052.00-V01AXXX View X 25

39.4 33.3

23.4

39.8ø 4(2x) Trough holes for mounting screw M4

50,533

Lifting unit 3052.00-0002

ø 3.6x6.5 deep (4x)for srew M4 DIN 7500

View Z

12

9ø20

24

X

Pin ø 5.2/4 high (2x)

ø 4.4/12.5 deepMounting hole (2x)

for screw WN1452 K50x12

a

b

18

16.5

Brake 3052.09-V01AXXX

Deflection gear 3052.00-V01AXXX

Deflection gear with brake 3052.00-V02AXXX (optional)

hex

6

39.8

A

hex

6

39.4

ø10

39.8

33 25

10

16.5

ø 15

Connecting tube 3052.40.-V01LXXXX

L1= a + 4L2= b + 4

square 33

25.5

hex

9

Y

65.5

ø12

ø 3.6 x 6.5 deep (4x) for screw M4 DIN 7500 A

A

26

ø12

E +

500

(max

. len

gth

1125

)

hex

6

ø 4.1(2x)

25.5

square 33

ø 4(2x) Trough holes for mounting screw M4

Z