FANE - Farnell element14 · For over 50 years FANE have designed and manufactured high quality, ... Crossover Passive mode only ... matt multi layer HardTex water based painting with

For over 50 years FANE have designed and manufactured high quality, high power component loudspeakers. FANE loudspeakers have been supplied worldwide to a customer-base which includes some of the most prestigious manufacturers of complete sound systems, and for applications covering almost every conceivable facet of sound production and reproduction.

2

As a result, FANE-manufactured loudspeakers components

have been used by the vast majority of the world’s leading

musical entertainments and have featured in systems

installed in some of the world’s most prestigious venues.

The question has often been asked – “Why does FANE

not produce its own range of integrated sound systems?”

Until now the reason has been the shortage of space and

time within a company busily attempting to satisfy a world

demand for FANE component products. Expanding capacity

has made possible the logical progression to complete

sound systems by FANE.

FANE Systems represent a major stage towards the

development of FANE into an all-embracing sound

company with the promise of advanced and innovative,

professional amplification and processing equipment to

follow. As with component audio products, the sound

system design philosophy continues to be researched – a

quest for the ultimate quality, performance, reliability and

user convenience combined with subtle and sophisticated

cosmetic design demanded by the foremost musical artists,

sound consultants and concert managements.

FANE Systems comprises the finest available range of

sound system designs, equipped with a special series

of customised FANE drive units, fine tuned by the FANE

research team to optimise every aspect of audio excellence

from this unique series of enclosure designs. The range

is manufactured in best quality birch plywood throughout

with high quality and integral hardware. Hanging/mounting

fitments are supplied and fitted as standard to ensure

that every type of venue and system location can be

accommodated.

FANE Systems represent the ultimate extended range.

Super powerful sound reproduction for every professional

application with the tonal distinction and colouration that is

a hallmark of FANE’s signature quality of performance.

3

Power Handling 250 w RMS (EIA 426A standard)500 w programme / 1000 w peak

Nominal Impedance 8 Ω (7.6 Ω minimum at 66 Hz)

Average Sensitivity 95 dB/ 2.83V/1m(average 200~16,000 Hz wideband)

Calculated Maximum SPL / 1m 119 dB continuous / 122 dB programme / 125 dB peak

Frequency Response (-6dB) 58~18500 Hz

Manufacturing Consistency +/- 3dB from 200 to 10,000 Hz

Nominal Directivity (-6dB) 80 x 60° above 1800Hz

Recommended Amplifier Up to 500 w at 8Ω (no clip) in specified frequency response

Recommended Low Cut Full range: 50 Hz 18 dB/oct ButterworthTop: 70 to 140 Hz 24 dB/oct Linkwitz-Riley

Low Frequency Driver FANE transducer 8Ω impedance8” (200 mm) diameter2” high temperature voice coil on glass fibre former

High Frequency Driver FANE Compression Driver 8Ω impedance1” (25 mm) exit, 1.34” (34 mm) voice coilTitanium diaphragm

Crossover Passive mode only3 kHz Right Phase design250V polypropylene capacitorsAir core inductors on HFAluminium housed resistors

Flying Hardware 5 M8 points with internal metal brackets4 M8 points compatible with Powerdrive Type 45 mounting accessories or equiva-lent omnimount system

Pole Mount Yes with optional adapter

Connectors 2pcs NEUTRIK Speakon NL4MP1+/1-: speaker Input2+/2-: Link

Cabinet CNC made with tongue and groove as-sembly 15 mm Russian birch plywoodexterior grade

Finish Proprietary HardTex sanded coating, black matt

Cabinet Size (HxWxD) 430 x 280 x 298 mm

Packing Carton Size (HxWxD) 494 x 344 x 352 mm

Weight 10 kg net11.5 kg gross

Optional Accessories Flight case with 100 mm wheels (for 4pcs)Abrasive resistant cover bagM8 Eye bolt kitWall mounting bracketU Mounting bracketFlying adapterCompatible with Powerdrive type 75 and Omnimount35 mm pole mount adapter

ADDITIONAL SPECIFICATIONSACOUSTIC SPECIFICATIONS

KEY FEATURES• Hi-fidelity sound without any EQ• Real 250 w RMS power handling (EIA 8 hrs Std) • Equipped with premium FANE Drivers• Elliptic 80ºx60º low resonance glass fibre horn• Multi purpose cabinet design for FOH or monitor use• Rock solid void-free birch plywood cabinet• Touring grade HardTex coating with sanded black matt finish• Complete line of flying hardware accessories• DSP preset support on associated electronics

SV-8 loudspeaker system is suitable for near field main PA reinforcement with subwoofer, portable system or permanent installation, wall, stand, or ceiling mountings, monitoring for vocals, delay fill or under balcony complementary diffusion.

SV-8

4

SV-8

FREQUENCY RESPONSE DATA

ARCHITECTURAL SPECIFICATIONS

The loudspeaker system shall be a passive, 2 way type consisting of one 8” (200mm) direct radiating reflex loaded low frequency transducer and one 1” (25mm) exit / 1.34” (34mm) voice coil HF compression driver that is mounted on a constant directivity elliptic glass fibre horn that provides a nominal coverage angle of 80° (horizontal) by 60° (vertical). The frequency response shall be 65 to 18000Hz in half space with less than ± 3dB variation. Low and high frequency sections shall be integrated by an internal 3kHz passive crossover network with Right Phase technology and 18dB/oct slopes. Power handling shall be 250W RMS, 1000W peak by EIA 426A standard (8 hours pink noise) average wideband (200-16000Hz). Efficiency on axis shall be 95dB/1W/1m and maximum SPL shall be 119B continuous / 125dB peak. Rated impedance shall be 8Ωs nominal.

The multi-angled enclosure shall be of a void free multi-laminate Russian birch ply construction with sealed internal bracing, multi position 35mm pole mount and threaded M8 inserts for wall and ceiling mounting. The screws shall be stainless steel 316L with 200 hours coating per ASTM-B117. The finish shall be a black matt multi layer HardTex water based painting with hardness higher than 75Hv. The front of the enclosure shall be protected by a black matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically transparent grille. Dimensions shall be (WxHxD) 280x430x298m and Weight 10kg.

10050 200 500 1k 2k 5k 10k 20k

FREQUENCY (Hz) MLS - 1/6th OCTAVE 4PI (free space)

dB S

PL

dB S

PL

0.0

10.0

20.0

30.0

40.0

50.0

60.0

70.0

80.0

90.0

100.0

110.0

120.0

130.0

140.0

0.0

10.0

20.0

30.0

40.0

50.0

60.0

70.0

80.0

90.0

100.0

110.0

120.0

130.0

140.0

5

Flying Hardware 10 M8 points with internal metal brackets4 M8 points compatible with Power drive Type 45 mounting accessories or equiva-lent Omnimount system

Pole Mount Multi position 35mm pot


Cabinet CNC made with tongue and groove assembly 15 and 18 mm Russian birch plywood exterior grade




Weight 13 kg net15 kg gross

Optional Accessories Flight case with 100 mm wheelsAbrasive resistant cover bagM8 Eye bolt kitWall mounting bracketU Mounting bracketFlying adapterCompatible with Powerdrive type 75 and Omnimount


Nominal Impedance 8 Ω (8.3 Ω minimum at 62Hz)

Average Sensitivity 95 dB/ 2.83V/1m (average 200~16,000 Hz wideband)



Manufacturing Consistency +/- 3 dB from 200 to 10,000 Hz




Low Frequency Driver FANE transducer 8Ω impedance10” (250 mm) diameter 3” high temperature voice coil on glass fibre former

High Frequency Driver FANE Compression Driver 8Ω impedance1” (25 mm) exit, 1.34” (34 mm) voice coilTitanium diaphragm

Crossover Passive mode only2.6 kHz Right Phase design400V polypropylene capacitorsAir core inductors on HFAluminium housed resistors

ACOUSTIC SPECIFICATIONS

KEY FEATURES• Hi-fidelity sound without any EQ• Real 300 w RMS power handling (EIA 8 hours Standard) • Equipped with premium FANE Drivers• Elliptic 80ºx60º low resonance glass fibre horn• Multi purpose cabinet design for FOH or monitor use• Rock solid void-free birch plywood cabinet• Touring grade HardTex coating with sanded black matt finish• Complete line of flying hardware accessories• DSP preset support on associated electronics

SV-10 loudspeaker system is suitable for near field main PA reinforcement with subwoofer, portable system or permanent installation, wall, stand, or ceiling mountings, monitoring for vocals and instruments, delay fill or under balcony complementary diffusion.

SV-10

ADDITIONAL SPECIFICATIONS

6



The loudspeaker system shall be a passive, 2 way type consisting of one 10” (250mm) direct radiating reflex loaded low frequency transducer and one 1” (25mm) exit / 1.34” (34mm) voice coil HF compression driver that is mounted on a constant directivity elliptic glass fibre horn that provides a nominal coverage angle of 80° (horizontal) by 60° (vertical). The frequency response shall be 56 to 18000Hz in half space with less than ± 3dB variation. Low and high frequency sections shall be integrated by an internal 2.6kHz passive crossover network with Right Phase technology and 18dB/oct slopes. Power handling shall be 300W RMS, 1200W peak by EIA 426A standard (8 hours pink noise) average wideband (200-16000Hz). Efficiency on axis shall be 95dB/1W/1m and maximum SPL shall be 120B continuous / 126dB peak. Rated impedance shall be 8Ωs nominal.

The multi-angled enclosure shall be of a void free multi-laminate Russian birch ply construction with sealed internal bracing, multi position 35mm pole mount and threaded M8 inserts for wall and ceiling mounting. The screws shall be stainless steel 316L with 200 hours coating per ASTM-B117. The finish shall be a black matt multi layer HardTex water based painting with hardness higher than 75Hv. The front of the enclosure shall be protected by a black matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically transparent grille. Dimensions shall be (WxHxD) 350x530x330mm and Weight 13kg.

SV-10

10050 200 500 1k 2k 5k 10k 20k


dB S

PL

dB S

PL

0.0

10.0

20.0

30.0

40.0

50.0

60.0

70.0

80.0

90.0

100.0

110.0

120.0

130.0

140.0

0.0

10.0

20.0

30.0

40.0

50.0

60.0

70.0

80.0

90.0

100.0

110.0

120.0

130.0

140.0

7










Low Frequency Driver FANE transducer 8Ω impedance12” (300 mm) diameter 2.5” high temperature voice coil on glass fibre former

High Frequency Driver 1” (25 mm) exit, 1.7” (44 mm) voice coilHeat treated Titanium diaphragm

Crossover Passive mode only2,2k Hz Right Phase design400V polypropylene capacitorsAir core inductors on HFAluminium housed resistors

Flying Hardware 12 M8 points with internal metal brackets

Pole Mount Multi position 35 mm pot


Cabinet CNC made with tongue and groove assembly 15 and 18 mm Russian birch plywood exterior grade





Optional Accessories Flight case with 100 mm wheelsAbrasive resistant cover bagM8 Eye bolt kitWall mounting bracketU Mounting bracketFlying adapter


KEY FEATURES• Hi-fidelity sound without any EQ• Real 300 w RMS power handling (EIA 8 hours Standard) • Equipped with famous FANE Drivers• Elliptic 80ºx60º low resonance glass fibre horn• Multi purpose cabinet design for FOH or monitor use• Rock solid void-free birch plywood cabinet• Touring grade HardTex coating with sanded black matt finish• Complete line of flying hardware accessories• DSP preset support on associated electronics

SV-12 loudspeaker system is suitable for near field main PA reinforcement with or without subwoofer, portable system or permanent installation, wall, stand, or ceiling mountings, monitoring for vocals and instruments, side fill in small stages, delay fill or under balcony complementary diffusion.

SV-12

8



SV-12

The loudspeaker system shall be a passive, 2 way type consisting of one 12” (300mm) direct radiating reflex loaded low frequency transducer and one 1” (25mm) exit / 1.7” (44mm) voice coil HF compression driver that is mounted on a constant directivity elliptic glass fibre horn that provides a nominal coverage angle of 80° (horizontal) by 60° (vertical). The frequency response shall be 56 to 18500Hz in half space with less than ± 3dB variation. Low and high frequency sections shall be integrated by an internal 2.2kHz passive crossover network with Right Phase technology and 18dB/oct slopes. Power handling shall be 300W RMS, 1200W peak by EIA 426A standard (8 hours pink noise) average wideband (200-16000Hz). Efficiency on axis shall be 97dB/1W/1m and maximum SPL shall be 122dB continuous / 128dB peak. Rated impedance shall be 8Ωs nominal.

The multi-angled enclosure shall be of a void free multi-laminate Russian birch ply construction with sealed internal bracing, multi position 35mm pole mount and threaded M8 inserts for wall and ceiling mounting. The screws shall be stainless steel 316L with 200 hours coating per ASTM-B117. The finish shall be a black matt multi layer UltraTex water based painting with hardness higher than 75Hv. The front of the enclosure shall be protected by a black matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically transparent grille. Dimensions shall be (WxHxD) 380x590x360mm and Weight 20kg.

10050 200 500 1k 2k 5k 10k 20k


dB S

PL

dB S

PL

0.0

10.0

20.0

30.0

40.0

50.0

60.0

70.0

80.0

90.0

100.0

110.0

120.0

130.0

140.0

0.0

10.0

20.0

30.0

40.0

50.0

60.0

70.0

80.0

90.0

100.0

110.0

120.0

130.0

140.0

9







Nominal Directivity (-6dB) 80 x 60° above 1500 Hz



Low Frequency Driver FANE transducer, 8 Ω impedance15” (380 mm) diameter 3” high temperature voice coil on glass fibre former

High Frequency Driver 1” (25 mm) exit, 1.7” (44 mm) voice coilHeat treated Titanium diaphragm



Pole Mount Multi position 35 mm pot


Cabinet CNC made with tongue and groove assembly 18 mm Russian birch plywoodexterior grade





Optional Accessories Flight case with 100 mm wheelsAbrasive resistant cover bagM8 Eye bolt kitWall mounting bracketU Mounting bracketFlying adapter

ACOUSTIC SPECIFICATIONS ADDITIONAL SPECIFICATIONS

KEY FEATURES• Hi-fidelity sound without any EQ• Real 600 w RMS power handling (EIA 8 hours Standard) • Equipped with famous FANE Drivers• Elliptic 80ºx60º low resonance glass fibre horn• Multi purpose cabinet design for FOH or monitor use• Rock solid void-free birch plywood cabinet• Touring grade HardTex coating with sanded black matt finish• Complete line of flying hardware accessories• DSP preset support on associated electronics

SV-15 loudspeaker system is suitable for near field main PA reinforcement with or without subwoofer, portable system or permanent installation, wall, stand, or ceiling mountings, monitoring for vocals and instruments, side fill in small stages, delay fill or under balcony complementary diffusion.

SV-15

10



The loudspeaker system shall be a passive, 2 way type consisting of one 15” (380mm) direct radiating reflex loaded low frequency transducer and one 1” (25mm) exit / 1.7” (44mm) voice coil HF compression driver that is mounted on a constant directivity elliptic glass fibre horn that provides a nominal coverage angle of 80° (horizontal) by 60° (vertical). The frequency response shall be 54 to 18500Hz in half space with less than ± 3dB variation. Low and high frequency sections shall be integrated by an internal 2kHz passive crossover network with Right Phase technology and 18dB/oct slopes. Power handling shall be 600W RMS, 1800W peak by EIA 426A standard (8 hours pink noise) average wideband (200-16000Hz). Efficiency on axis shall be 98dB/1W/1m and maximum SPL shall be 122dB continuous / 128dB peak. Rated impedance shall be 8Ωs nominal.

The multi-angled enclosure shall be of a void free multi-laminate Russian birch ply construction with sealed internal bracing, multi position 35mm pole mount and threaded M8 inserts for wall and ceiling mounting. The screws shall be stainless steel 316L with 200 hours coating per ASTM-B117. The finish shall be a black matt multi layer HardTex water based painting with hardness higher than 75Hv. The front of the enclosure shall be protected by a black matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically transparent grille. Dimensions shall be (WxHxD) 442x708x446mm and Weight 28kg.

SV-15

dB S

PL

dB S

PL

0.0

10.0

20.0

30.0

40.0

50.0

60.0

70.0

80.0

90.0

100.0

110.0

120.0

130.0

140.0

0.0

10.0

20.0

30.0

40.0

50.0

60.0

70.0

80.0

90.0

100.0

110.0

120.0

130.0

140.0

10050 200 500 1k 2k 5k 10k 20k


11


Pole Mount 35 mm metal







Optional Accessories Flight case with 100 mm wheelsAbrasive resistant cover bagM8 Eye bolt kitAdjustable coupling bar







Nominal Directivity (-6dB) Omnidirectional (cardoid presets available on FANE DSP amplifiers)


Recommended Crossover Low pass: 80 to 150 Hz 24 dB/oct Linkwitz-RileyHigh pass: 35 Hz 18 dB/oct Butterworth

Low Frequency Driver Fane Transducer, 8 Ω impedance15” (380 mm) diameter 3” high temperature voice coil on glass fibre former

Crossover No, active usage onlyFANE DSP recommended


KEY FEATURES• High performance compact subwoofer• Real 600W RMS power handling (EIA 8 hours Standard) • Equipped with famous FANE long excursion Driver• Rock solid void-free birch plywood cabinet• Touring grade HardTex coating with sanded black matt finish• Complete line of hardware accessories• DSP preset support on associated electronics

SV-115S subwoofer system is suitable for bass reinforcement for main PA systems, touring or permanent installations in small to medium stages, indoor or outdoor live performances, arenas, night clubs, houses of worship, auditoriums and theatres.

SV-115 S

12


The subwoofer system shall be active, consisting of one 15” (380mm) direct radiating reflex loaded low frequency transducer with high excursion ability. The frequency response shall be 44 to 2000Hz in half space with less than ± 3dB variation. Power handling shall be 600W RMS, 1800W peak by EIA 426A standard (8 hours pink noise) average wideband (50-1000Hz). Efficiency on axis shall be 97dB/1W/1m and maximum SPL shall be 125dB continuous / 131dB peak. Rated impedance shall be 8Ωs nominal.

The stackable enclosure shall be of a void free multi-laminate Russian birch ply construction with sealed internal bracing, metal 35mm pole mount and threaded M8 inserts for ceiling

mounting. The screws shall be stainless steel 316L with 200 hours coating per ASTM-B117. The finish shall be a black matt multi layer HardTex water based painting with hardness higher than 75Hv. The front of the enclosure shall be protected by a black matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically transparent grille. Dimensions shall be (WxHxD) 505x545x605mm and Weight 29kg.

SV-115 S

13



Average Sensitivity 100 dB/ 2.83V/1m (average 200~16,000Hz wideband)




Nominal Directivity (-6dB) 60 x 40° above 1500 Hz

Recommended Amplifier Up to 2000w at 4Ω (no clip) in specified frequency response

Recommended Low Cut Full range: 30 Hz 18 dB/oct ButterworthTop: 55 - 125 Hz 24 dB/oct Linkwitz-Riley

Low Frequency Driver 2x FANE transducers 8Ω impedance15” (380 mm) diameter chassis3” high temperature voice coil on glass fibre former

High Frequency Driver 1” (25 mm) exit. 1.7” (44 mm) voice coilHeat treated Titanium diaphragm




Pole Mount Not available


Cabinet CNC made with tongue and groove assembly 18 mm Russian birch plywood exterior grade





Optional Accessories Abrasive resistant cover bagM8 Eye bolt kit

KEY FEATURES• Hi-fidelity sound without any EQ• Real 1000w RMS power handling (EIA 8 hours Standard)• Equipped with famous FANE Drivers• Elliptic 60ºx40º low resonnance glass fibre horn• Rock solid void-free birch plywood cabinet• Touring grade HardTex coating with sanded black matt finish• Complete line of flying hardware accessories• DSP preset support on associated electronics

SV-152 loudspeaker system is suitable for near field main PA reinforcement with or without subwoofer, portable system or permanent installation, monitoring for drums, sidefill in small stages or delay fill complementary diffusion.

SV-152

14


The loudspeaker system shall be a passive, 2 way type consisting of two 15” (380 mm) direct radiating reflex loaded low frequency transducer and one 1” (25 mm) exit / 1.7” (44 mm) voice coil HF compression driver that is mounted on a constant directivity elliptic glass fibre horn that provides a nominal coverage angle of 60°(horizontal) by 40° (vertical). The frequency response shall be 52 to 18500Hz in half space with less than ± 3dB variation. Low and high frequency sections shall be integrated by an internal 2kHz passive crossover network with RightPhase technology and 18dB/oct slopes. Power handling shall be 1000w RMS, 4000w peak by EIA 426A standard (8 hours pink noise). Average wideband (200-16000Hz) efficiency on axis shall be 100dB/1W/1m and maximum SPL shall be

130dB continuous / 136dB peak. Rated impedance shall be 4 ohms nominal.

The enclosure shall be of a void free multi-laminate Russian birch ply construction with sealed internal bracing and threaded M8 inserts for ceiling mounting. The screws shall be Stainless Steel 316L with 200 hours coating per ASTM-B117. The finish shall be a black mat multi layer HardTex water based painting with hardness higher than 75Hv. The front of the enclosure shall be protected by a black mat dual layer coated (powder + acrilyc) 1.5 mm thick steel acoustically transparent grille. Dimensions shall be (HxWxD) 1125x442x468mm and Weight 52kg.

SV-152


10050 200 500 1k 2k 5k 10k 20k

dB S

PL

dB S

PL


0.0

10.0

20.0

30.0

40.0

50.0

60.0

70.0

80.0

90.0

100.0

110.0

120.0

130.0

140.0

0.0

10.0

20.0

30.0

40.0

50.0

60.0

70.0

80.0

90.0

100.0

110.0

120.0

130.0

140.0

15










Low Frequency Driver Fane Transducer, 8 Ω impedance18” (460 mm) diameter 4” high temperature voice coil on glass fibre former





Cabinet CNC made with tongue and groove assembly 18 mm and 24 mm Russian birch plywoodexterior grade







KEY FEATURES• High performance compact subwoofer• 30Hz usable frequency• Real 800 w RMS power handling (EIA 8 hours Standard) • Equipped with famous FANE long excursion Driver• Rock solid void-free birch plywood cabinet• Touring grade HardTex coating with sanded black matt finish• Complete line of hardware accessories• DSP preset support on associated electronics

SV-118S subwoofer system is suitable for bass reinforcement for main PA systems, touring or permanent installations in small to medium stages, indoor or outdoor live performances, arenas, night clubs, houses of worship, auditoriums and theatres.

SV-118 S

16


The subwoofer system shall be active, consisting of one 18” (460mm) direct radiating reflex loaded low frequency transducer with high excursion ability. The frequency response shall be 35 to 1300Hz in half space with less than ± 3dB variation. Power handling shall be 800W RMS, 2400W peak by EIA 426A standard (8 hours pink noise) average wideband (50-1000Hz). Efficiency on axis shall be 99dB/1W/1m and maximum SPL shall be 128dB continuous / 134dB peak. Rated impedance shall be 8Ωs nominal.

The stackable enclosure shall be of a void free multi-laminate Russian birch ply construction with sealed internal bracing,

metal 35mm pole mount and threaded M8 inserts for ceiling mounting. The screws shall be stainless steel 316L with 200 hours coating per ASTM-B117. The finish shall be a black matt multi layer HardTex water based painting with hardness higher than 75Hv. The front of the enclosure shall be protected by a black matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically transparent grille. Dimensions shall be (WxHxD) 561x600x705mm and Weight 45kg.

SV-118 S

17










Low Frequency Driver 2x FANE transducers 8Ω impedance15” (380 mm) diameter3” high temperature voice coil on glass fibre former



Flying Hardware Not Available









KEY FEATURES• High performance compact subwoofer• Real 1200 w RMS power handling (EIA 8 hours Standard) • Equipped with premium FANE long excursion Driver• Rock solid void-free birch plywood cabinet• Touring grade HardTex coating with sanded black matt finish• Complete line of hardware accessories• DSP preset support on associated electronics

SV-215S subwoofer system is suitable for bass reinforcement for main PA systems, touring or permanent installations in small to medium stages, indoor or outdoor live performances, arenas, night clubs, houses of worship, auditoriums and theatres .

SV-215 S

18

The subwoofer system shall be active, consisting of two 15” (380mm) direct radiating reflex loaded low frequency transducer with high excursion ability. The frequency response shall be 44 to 2000Hz in half space with less than ± 3dB variation. Power handling shall be 1200W RMS, 4800W peak by EIA 426A standard (8 hours pink noise) average wideband (50-1000Hz). Efficiency on axis shall be 100dB/1W/1m and maximum SPL shall be 131dB continuous / 137dB peak. Rated impedance shall be 4Ωs nominal.



SV-215 S


19



Average Sensitivity 102 dB/ 2.83 V/1m (average 50~1,000 Hz wideband)







Low Frequency Driver 2x FANE transducers 8Ω impedance18” (460 mm) diameter4” high temperature voice coil on glass fibre former



Flying Hardware Not Available



Cabinet CNC made with tongue and groove assembly 18 mm and 24 mm Russian birch plywood exterior grade






KEY FEATURES• High performance compact subwoofer• 30 Hz usable frequency• Real 1600 w RMS power handling (EIA 8 hours Standard) • Equipped with famous FANE long excursion Driver• Rock solid void-free birch plywood cabinet• Touring grade HardTex coating with sanded black matt finish• Complete line of hardware accessories• DSP preset support on associated electronics

SV-218S subwoofer system is suitable for bass reinforcement for main PA systems, touring or permanent installations in medium to large stages, indoor or outdoor live performances, arenas, stadiums, night clubs, houses of worship, auditoriums and theatres.

SV-218 S

20


The subwoofer system shall be active, consisting of two 18” (460mm) direct radiating reflex loaded low frequency transducer with high excursion ability. The frequency response shall be 36 to 1300Hz in half space with less than ± 3dB variation. Power handling shall be 1600W RMS, 6400W peak by EIA 426A standard (8 hours pink noise) average wideband (50-1000Hz). Efficiency on axis shall be 102dB/1W/1m and maximum SPL shall be 134dB continuous / 140dB peak. Rated impedance shall be 4Ωs nominal.



SV-218 S

Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are correct at the time of print. © 2011, Fane International Ltd.

FANE INTERNATIONAL LTD.Sovereign HouseGilcar WayWakefield EuroportCastleford WF10 5QSUnited Kingdom

Tel: +44 (0)1924 224618Fax: +44 (0)1924 899166Email: [email protected]

Documents

FANE - Farnell element14 · For over 50 years FANE have designed and manufactured high quality, ... Crossover Passive mode only ... matt multi layer HardTex water based painting with