Upload
dangnguyet
View
225
Download
1
Embed Size (px)
Citation preview
1
2
3
4
5
Table of contents
Glass Facade Systems
Tools And Accessoires
08/2011
Rainscreen Cladding m2 / m3 / MQL / MQLK / MB / MBK / MBR MBRK / MBR-X / MBRK-X / MDH / MDD
SW-T / SW3-T-H15 / SD / SD-H15 / SLA SX / SDA / ASO
AP / ASO / SSO / SLA-D12 / TW-S / TW-A4SX / GA-AS / GA-BS / SCFW-S / SDF2-S / TU-S
Corner bracket B / SDS drill bits / HSS drill bits EPDM / PFS-K / PFS-Q / PFR / PF-Z / PV
ALW-S1 / ALW-S2 / ALW-D / ALW-L1ALW-L2
VDS kit Large / VDS kit MediumVDS kit Small / Single components
Brickwork fastening
Subframe fastening
Panel fastening
Ancillaries
System ALW
Canopy System VDS
DI 650 / DB 620 / Lazy tongs RM-25 Lever tool RM-20 / AccuBird®
PowerBird®
Tools and accessories
Services and
Business solutions
Attachment
News for
your success.
08/2011
From their Swiss HQ in Heerbrugg, the SFS Group operates internationally within four divisions:SFS intec, SFS unimarket, SFS locher and SFS services.
SFS intec serves the global engineering sub-contract and construction markets with high precision components. The division develops, manufactures and markets from four focused operating units:
AutomotiveProducts:
Offering precision custom components to the automotive industry and its supply base: including cold formed parts, deep drawing and demanding plastic injection mouldings, as well as metal-to-plastic combinations.
IndustrialProducts:
Serving the electrical and electronics industries, the aircraft sector and the architectural hardware and machine tool businesses with ready-to-fit special screws and components.
FasteningSystems:
Furnishing the building trades and their supply base with systems for mechanical fixing. Supplying primarily producers of doors and windows with mechanical fixing systems and hinges and the transport sector with made-to-measure installation solutions.
Whether as a component supplier or service provider, SFS intec constantly strives to forge value-added chains with suppliers and customers alike. The ability to develop and continuously improve products and processes to the mutual benefit of our business partners and ourselves is a core factor in maintaining our competitive edge and therefore the success of SFS intec and our partners.
© S
FS in
tec,
iRC
, 08/
11, 9
04 4
60, E
Te
chni
cal c
hang
es r
eser
ved
Prin
ted
in S
witz
erla
nd
1
19
1.08/2011
Rainscreen cladding Fasteners and rivets
1Application Product code Page
Lining panel Corner bracket B � 1.2
Drill bits SDS � 1.3
Lining panel m2 / m2-S4 / m3 � 1.4
Universal plug MQL / MQLK � 1.7
Hollow brick, masonry MB / MBK � 1.9
Concrete, solid brick MBR / MBRK � 1.12
Concrete, high performanceMBR-X
MBRK-X � 1.15
Insulation Anchors MDH / MDD � 1.17
Steel substructure
SW-T
SW3-T-H15 / SD
SD-H15
� 1.19
Aluminium frameworkSLA / SX / SDA
ASO � 1.23
High performance cladding to
aluminium and steel frameworkAP / ASO / SSO � 1.26
Aluminium framework SLA-D12 � 1.30
Non metallic high performance
cladding panel to timber battenTW-S / TW-A4 � 1.32
Sealing joint EPDM � 1.34
Steel substructure SX � 1.35
Special aesthetical fasteningGA-AS
GA-BS � 1.37
Non metallic high performance
cladding panel to timber battenSCFW-S � 1.39
Non metallic high performance
cladding to steel frameworkSDF2-S � 1.41
Blind fastening of HPL-cladding
panelsTU-S � 1.43
ProfilesPFS-K / PFS-Q
PFR / PF-Z / PV � 1.45
2
1
Rainscreen cladding
Corner bracket B
Corner bracket
Corner bracket for lining
Corner bracket B
Technical information
Application
Corner bracket for fixing beams or metal structures to the support structure.
Fixing
Fissaggio
Corner bracket BGalvanised steel measuring 25/100 mm (in compliance with DX51D + Z according to EN 10142) Two-face lining in Z275
Order Code
B 50-T
Application Product Type L KL Application range
�� Carbon steel BBBBBBBBBBBBBBBBBBBBBBBB
50-T60-T70-T80-T90-T100-T110-T120-T130-T140-T150-T160-T170-T190-T200-T210-T220-T240-T250-T260-T270-T280-T290-T300-T
Fixed width A of 50 mm Length L. variable from 50 to 300 mm Fixed height H of 60 mm
8.5x30 mm and 8.5xL mm slot holes Holes dia Ø 6.5
08/20111.
Tools and accessories can be found in chapter 3
3
1
1.08/2011
Rainscreen cladding
SDS
Hammer drill bits SDS
Drill bits
Order information
F
d
L
SDS Carbide-geometry Dynamic, chisel-shaped drill bit head Multi-fluted, spacious KVS-spiral Unique KVS-flute design
d diameter | L Length | F working length | All measures in mm
Order codeSDS- 8,0x 110/ 50- 4PLUS
Type d L F Code F Application range
SDS-SDS-SDS-SDS-
8,0x8,0x8,0x8,0x
110/160/210/260/
50-100-150-200-
4PLUS4PLUS4PLUS4PLUS
50
100
150
200
m2
m3 MDH
SDS-SDS-SDS-SDS-SDS-
10,0x10,0x10,0x10,0x10,0x
110/160/210/260/310/
50-100-150-200-250-
4PLUS4PLUS4PLUS4PLUS4PLUS
50
100
150
200
250
MQLMBRMBMDD
Tools and accessories can be found in chapter 3
4
1
Rainscreen cladding
Fasteners m2
Fasteners for corner brackets
Fasteners for corner brackets onto concrete
08/20111.
m2
Technical information
Application
Fixing the corner brackets of the beams or metal structures onto concrete. Recommended materials: Concrete C20/25 with crush strength of 25N/mm2
Material
Fastener
Fastener m2 Pin in white galvanised steel / ex-pansion bush in stainless steel A2
Washer 15 mm in galvanised steel/nut in white galvanised steel
Order code
m2- 8,0x 80
Application Product Type d L t�� Application range
�� Carbon steel m2-m2-
8,0x8,0x
8095
10
25
Minimum anchorage depth h1: 50 mm
Assembly recommendations: The metal fastener must be positioned in the upper slotted hole
Fire resistance
Drill bit for concrete: Ø 8mm: SDS4–Plus–8xL
Tools and accessories can be found in chapter 3
5
1
m2-S4
Technical information
Application
Fixing the corner brackets of the beams or metal structures onto concrete. Recommended materials: Concrete C20/25 with crush strength of 25N/mm2
Material
Fastener
Fastener m2-S4Pin in stainless steel A4 / expansion bush in stainless steel in A4
Washer 15 mm in stainless steel A4 hex nut in stainless steel A4
Order code
m2-S4- 8,0x 80
Application Product Type d L t�� Application range
�� Stainless steel A4 m2-S4-m2-S4-
8,0x8,0x
8095
10
25
Minimum anchorage depth h1: 50 mm
Assembly recommendations: The metal fastener must be positioned in the upper slotted hole
Fire resistance
Drill bit for concrete: Ø 8mm: SDS4–Plus–8xL
1.08/2011
Rainscreen cladding
Fasteners m2-S4
Fasteners for corner brackets
Fasteners for corner brackets onto concrete
Tools and accessories can be found in chapter 3
6
1
08/20111.
m3
Technical information
Application
Fixing the corner brackets of the beams or metal structures onto concrete. Recommended materials: Concrete C20/25 with crush strength of 25N/mm2
Material
Fastener
Fastener m3 Pin in white galvanised steel / ex-pansion bush in stainless steel A2
Washer 15 mm in galvanised steel/nut in white galvanised steel
Order code
m3- 8,0x 80
Application Product Type d L t�� Application range
�� Carbon steel m3-m3-m3-
8,0x8,0x8,0x
8095115
15
30
50
Minimum anchorage depth h1: 46 mm
Assembly recommendations: The metal fastener must be positioned in the upper slotted hole
Fire resistance
Drill bit for concrete: Ø 8mm: SDS4–Plus–8xL
Rainscreen cladding
Fasteners m3
Fasteners for corner brackets
Fasteners for corner brackets onto concrete
Tools and accessories can be found in chapter 3
7
1
MQL / MQLK
Technical information
Application
Anchoring facade structure of metal or timber:- vertically perforated brick- chalky perforated sandstone- full brick of light concrete- universal mounting- concrete- solid brick- natural stone
Material
Fastener
MQL / MQLKAnchor sleeve: High value Polyamide Screw: S = Stainless steel, grade AISI 316 (European Standard 1.4401) T = Steel 5.8, electrogalvanize
Drive: T40 = Countersunk TORX® T40 HX = Hexagonal 13 mm
HD headform / drive
T40 recess Hexagon 13 mm A/F Hexagon H18 13 mm A/F
Tools and accessories
DB 620
Hammer drilling machine for pre-drilling concrete and masonry.
DI 650
Lightweight power screwgun for in-stalling self drilling and self tapping fasteners.
1.08/2011
Pannello di rivestimento
Tasselli d'ancoraggio m3
Facade anchors
Universal plug
1.08/2011
Rainscreen cladding
MQL / MQLK
Tools and accessories can be found in chapter 3
8
1
1. 08/2011
Rainscreen cladding
MQL / MQLK
Facade anchors
Universal plug
Order information
KLL
d
T40 recess Hexagon 13 mm A/F
Hexagon H18 13 mm A/F
VD max. penetration | KL clamping length | HD headform / drive | W washer material and diameter | d thread diameter | L Length | t thickness of structure | All measures in mm
Order codeMQL- T40- 10,0x 80
Application Product Approval Type HD d L KL Application range
�� Carbon steel MQL-MQL-MQL-MQL-MQL-MQL-MQL-
T40-T40-T40-T40-T40-T40-T40-
10,0x10,0x10,0x10,0x10,0x10,0x10,0x
80100120140160180200
10
30
50
70
90
110
130
Anchoring depth min. 70 mm embedment Area of application - vertically perforated brick- chalky perforated sandstone- full brick of light concrete- universal mounting- concrete- solid brick- natural stone
�� Carbon steel MQL-MQL-MQL-MQL-MQL-MQL-MQL-
HX-HX-HX-HX-HX-HX-HX-
10,0x10,0x10,0x10,0x10,0x10,0x10,0x
80100120140160180200
10
30
50
70
90
110
130
Anchoring depth min. 70 mm embedment Area of application - vertically perforated brick- chalky perforated sandstone- full brick of light concrete- universal mounting- concrete- solid brick- natural stone
�� Carbon steel MQLK-MQLK-MQLK-
H18-H18-H18-
10,0x10,0x10,0x
80100120
10
30
50
Anchoring depth min. 70 mm embedment Area of application - vertically perforated brick- chalky perforated sandstone- full brick of light concrete- universal mounting- concrete- solid brick- natural stone
�� Stainless steel A4 MQL-S4-MQL-S4-MQL-S4-MQL-S4-MQL-S4-MQL-S4-MQL-S4-
T40-T40-T40-T40-T40-T40-T40-
10,0x10,0x10,0x10,0x10,0x10,0x10,0x
80100120140160180200
10
30
50
70
90
110
130
Anchoring depth min. 70 mm embedment Area of application - vertically perforated brick- chalky perforated sandstone- full brick of light concrete- universal mounting- concrete- solid brick- natural stone
Tools and accessories can be found in chapter 3
9
1
MB / MBK
Technical information
Application
Anchoring facade structure of metal or timber: - vertically perforated brick - chalky perforated sandstone - full brick of light concrete - foam mortar
Material
Fastener
MB / MBKAnchor sleeve: High value Polyamide Screw: S = Stainless steel, grade AISI 316 (European Standard 1.4401) T = Steel 5.8, electrogalvanize
Drive: T40 = Countersunk TORX® T40 HX = Hexagonal 13 mm
HD headform / drive
T40 recess Hexagon 13 mm A/F Hexagon H18 13 mm A/F
Tools and accessories
DB 620
Hammer drilling machine for pre-drilling concrete and masonry.
DI 650
Lightweight power screwgun for in-stalling self drilling and self tapping fasteners.
1.08/2011
Pannello di rivestimento
Tasselli d'ancoraggio m3
Facade anchors
Hollow brick, masonry
1.08/2011
Rainscreen cladding
MB / MBK
Tools and accessories can be found in chapter 3
10
1
1. 08/2011
Rainscreen cladding
MB / MBK
Facade anchors
Hollow brick, masonry
Order information
KLL
d
T40 recess Hexagon 13 mm A/F
Hexagon H18 13 mm A/F
VD max. penetration | KL clamping length | HD headform / drive | W washer material and diameter | d thread diameter | L Length | t thickness of structure | All measures in mm
Order codeMB-S4- T40- 10,0x 80
Application Product Approval Type HD d L KL Application range
�� Stainless steel A4
DIBt
iegtZu assung
vor
MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-
T40-T40-T40-T40-T40-T40-T40-T40-T40-
10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x
80100120140160200240280300
10
30
50
70
90
130
170
210
230
Anchoring depth min. 70 mm embedment Area of application - Vertically perforated brick - Chalky perforated sandstone - Hollow concrete - Full brick of light concrete
�� Stainless steel A4
DIBt
iegtZu assung
vor
MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-MB-S4-
HX-HX-HX-HX-HX-HX-HX-HX-
10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x
80100120140160200240300
10
30
50
70
90
130
170
230
Anchoring depth min. 70 mm embedment Area of application - Vertically perforated brick - Chalky perforated sandstone - Hollow concrete - Full brick of light concrete
�� Stainless steel A4
DIBt
iegtZu assung
vor
MBK-S4-MBK-S4-
H18-H18-
10,0x10,0x
80100
10
30 Anchoring depth min. 70 mm embedment Area of application - Vertically perforated brick - Chalky perforated sandstone - Hollow concrete - Full brick of light concrete
Tools and accessories can be found in chapter 3
11
1
1.08/2011
Rainscreen cladding
MB / MBK
Facade anchors
Hollow brick, masonry
Order codeMB- T40- 10,0x 80
Application Product Approval Type HD d L KL Application range
�� Carbon steel
DIBt
iegtZu assung
vor
MB-MB-MB-MB-MB-MB-MB-MB-MB-
T40-T40-T40-T40-T40-T40-T40-T40-T40-
10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x
80100120140160200240280300
10
30
50
70
90
130
170
210
230
Anchoring depth min. 70 mm embedment Area of application - Vertically perforated brick - Chalky perforated sandstone - Hollow concrete - Full brick of light concrete
�� Carbon steel
DIBt
iegtZu assung
vor
MB-MB-MB-MB-MB-MB-MB-MB-MB-
HX-HX-HX-HX-HX-HX-HX-HX-HX-
10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x
80100120140160200240280300
10
30
50
70
90
130
170
210
230
Anchoring depth min. 70 mm embedment Area of application - Vertically perforated brick - Chalky perforated sandstone - Hollow concrete - Full brick of light concrete
�� Carbon steel
DIBt
iegtZu assung
vor
MBK-MBK-MBK-
H18-H18-H18-
10,0x10,0x10,0x
80100120
10
30
50Anchoring depth min. 70 mm embedment Area of application - Vertically perforated brick - Chalky perforated sandstone - Hollow concrete - Full brick of light concrete
Tools and accessories can be found in chapter 3
12
1
1. 08/2011
Rainscreen cladding
MBR / MBRK
Facade anchors
Concrete, solid brick
MBR / MBRK
Technical information
Application
Anchoring facade structure of metal or timber: - concrete - solid brick - hollow concrete
Material
Fastener
MBR / MBRKAnchor sleeve: High value Polyamide Screw: S = Stainless steel, grade AISI 316 (European Standard 1.4401) T = Steel 5.8, electrogalvanize
Drive: T40 = Countersunk TORX® T40 HX = Hexagonal 13 mm
HD headform / drive
T40 recess Hexagon 13 mm A/F Hexagon H18 13 mm A/F
Tools and accessories
DB 620
Hammer drilling machine for pre-drilling concrete and masonry.
DI 650
Lightweight power screwgun for in-stalling self drilling and self tapping fasteners.
Tools and accessories can be found in chapter 3
13
1
1.08/2011
Rainscreen cladding
MBR / MBRK
Facade anchors
Concrete, solid brick
Order information
KLL
dT40 recess Hexagon
13 mm A/FHexagon H18
13 mm A/F
VD max. penetration | KL clamping length | HD headform / drive | W washer material and diameter | d thread diameter | L Length | t thickness of structure | All measures in mm
Order codeMBR-S4- T40- 10,0x 60
Application Product Approval Type HD d L KL Application range
�� Stainless steel A4
DIBt
iegtZu assung
vor
MBR-S4-MBR-S4-MBR-S4-MBR-S4-
T40-T40-T40-T40-
10,0x10,0x10,0x10,0x
60100120140
10
50
70
90
Anchoring depth min. 50 mm embedment Area of application - Concrete, solid brick - Chalky sandstone - Hollow concrete - Full brick of light concrete
�� Stainless steel A4
DIBt
iegtZu assung
vor
MBR-S4-MBR-S4-MBR-S4-MBR-S4-MBR-S4-MBR-S4-MBR-S4-MBR-S4-
HX-HX-HX-HX-HX-HX-HX-HX-
10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x
6080100120140160200240
10
30
50
70
90
110
150
190
Anchoring depth min. 50 mm embedment Area of application - Concrete, solid brick - Chalky sandstone - Hollow concrete - Full brick of light concrete
�� Stainless steel A4
DIBt
iegtZu assung
vor
MBRK-S4- H18- 10,0x 60 10
Anchoring depth min. 50 mm embedment Area of application - Concrete, solid brick - Chalky sandstone - Hollow concrete - Full brick of light concrete
Tools and accessories can be found in chapter 3
14
1
1. 08/2011
Rainscreen cladding
MBR / MBRK
Facade anchors
Concrete, solid brick
Order information
KLL
dT40 recess Hexagon
13 mm A/FHexagon H18
13 mm A/F
VD max. penetration | KL clamping length | HD headform / drive | W washer material and diameter | d thread diameter | L Length | t thickness of structure | All measures in mm
Order codeMBR- T40- 10,0x 60
Application Product Approval Type HD d L KL Application range
�� Carbon steel
DIBt
iegtZu assung
vor
MBR-MBR-MBR-MBR-MBR-MBR-MBR-MBR-
T40-T40-T40-T40-T40-T40-T40-T40-
10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x
6080100120140160200240
10
30
50
70
90
110
150
190
Anchoring depth min. 50 mm embedment Area of application - Concrete, solid brick - Chalky sandstone - Hollow concrete - Full brick of light concrete
�� Carbon steel
DIBt
iegtZu assung
vor
MBR-MBR-MBR-MBR-MBR-MBR-MBR-MBR-
HX-HX-HX-HX-HX-HX-HX-HX-
10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x
6080100120140160200240
10
30
50
70
90
110
150
190
Anchoring depth min. 50 mm embedment Area of application - Concrete, solid brick - Chalky sandstone - Hollow concrete - Full brick of light concrete
�� Carbon steel
DIBt
iegtZu assung
vor
MBRK-MBRK-MBRK-
H18-H18-H18-
10,0x10,0x10,0x
6080100
10
30
50Anchoring depth min. 50 mm embedment Area of application - Concrete, solid brick - Chalky sandstone - Hollow concrete - Full brick of light concrete
Tools and accessories can be found in chapter 3
15
1
1.08/2011
Rainscreen cladding
MBR-X / MBRK-X
Facade anchors
Concrete, high performance
MBR-X / MBRK-X
Technical information
Application
Anchoring facade structure of metal or timber: - concrete - solid brick - hollow concrete
Material
Fastener
MBR-X / MBRK-XAnchor sleeve: High value Polyamide Screw: S = Stainless steel, grade AISI 316 (European Standard 1.4401) T = Steel 5.8, electrogalvanize
Drive: T40 = Countersunk TORX® T40 HX = Hexagonal 13 mm
HD headform / drive
T40 recess Hexagon H18 13 mm A/F
Tools and accessories
DB 620
Hammer drilling machine for pre-drilling concrete and masonry.
DI 650
Lightweight power screwgun for in-stalling self drilling and self tapping fasteners.
Tools and accessories can be found in chapter 3
16
1
1. 08/2011
Rainscreen cladding
MBR-X / MBRK-X
Facade anchors
Concrete, high performance
Order information
KLL
dT40 recess Hexagon H18
13 mm A/F
VD max. penetration | KL clamping length | HD headform / drive | W washer material and diameter | d thread diameter | L Length | t thickness of structure | All measures in mm
Order codeMBR-X-S4- T40- 10,0x 60
Application Product Approval Type HD d L KL Application range
�� Stainless steel A4
DIBt
iegtZu assung
vor
MBR-X-S4-MBR-X-S4-MBR-X-S4-MBR-X-S4-MBR-X-S4-MBR-X-S4-MBR-X-S4-MBR-X-S4-
T40-T40-T40-T40-T40-T40-T40-T40-
10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x
6080100120140160200240
10
30
50
70
90
110
150
190
Anchoring depth min. 50 mm embedment Area of application - Concrete, solid brick - Chalky sandstone - Hollow concrete - Full brick of light concrete
�� Stainless steel A4
DIBt
iegtZu assung
vor
MBRK-X-S4-MBRK-X-S4-
H18-H18-
10,0x10,0x
6080
10
30 Anchoring depth min. 50 mm embedment Area of application - Concrete, solid brick - Chalky sandstone - Hollow concrete - Full brick of light concrete
�� Carbon steel
DIBt
iegtZu assung
vor
MBR-X-MBR-X-MBR-X-MBR-X-MBR-X-MBR-X-MBR-X-MBR-X-
T40-T40-T40-T40-T40-T40-T40-T40-
10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x
6080100120140160200240
10
30
50
70
90
110
150
190
Anchoring depth min. 50 mm embedment Area of application - Concrete, solid brick - Chalky sandstone - Hollow concrete - Full brick of light concrete
�� Carbon steel
DIBt
iegtZu assung
vor
MBRK-X-MBRK-X-
H18-H18-
10,0x10,0x
6080
10
30 Anchoring depth min. 50 mm embedment Area of application - Concrete, solid brick - Chalky sandstone - Hollow concrete - Full brick of light concrete
Tools and accessories can be found in chapter 3
17
1
Rainscreen cladding
MDH
Fixing insulation boards with plastic anchors
Insulation Anchors
1.
Tools and accessories can be found in chapter 3
MDH
Technical information
Application
Pressure-resistant insulating materials, mineral wool, glass wool- For general purpose use in soft insulation- Suitable for all substrates- Suitable for insulation thickness up to 210 mm- Through fixing- Do not use for overhead fixing
Material
Insulation anchor
MDH Ø 90 mmPlug: Plastic
Order information
L
d
d diameter | L overall length | SD Setting depth | All measures in mm
Order codeMDH- 8,0x 60
Applications Product Type d L SD Application range
�� Plastic MDH-MDH-MDH-MDH-MDH-MDH-MDH-MDH-MDH-MDH-
8,0x8,0x8,0x8,0x8,0x8,0x8,0x8,0x8,0x8,0x
6080100120140160
180*200*220*240*
20
20
20
20
20
20
30
30
30
30
1. Drill a pilot hole�������� ���������������������������������3. Use a hammer for installation4. MDH has to be hammered precisely onto insulation
* two pieces
1
3
2
4
18
1
Rainscreen cladding
MDD
Fixing insulation boards with plastic anchors
Insulation Anchors
08/20111.
Tools and accessories can be found in chapter 3
MDD
Technical information
Applications
Pressure-resistant insulating materials, polyurethane rigid foam panels, polystyrenes, mineral wools - For general purpose use in hard and soft insulation pads - Suitable for all substrates - Anchor of insulation thickness up to 170 mm - Do not use for overhead fixing- with glass fibre reinforced plastic pin- Resistant to cold and heat- Through fixing
Material
Fastener
MDDPlug: Polyamide Thorn: Polyamide
Disc
MDD-VS: Disc for MDD Ø 90 mmPolyamide
Order information
L
d
d diameter | L overall length | SD Setting depth | All measures in mm
Order codeMDD- 10,0x 70
Applications Product Type d L SD Application range
�� Plastic MDD-MDD-MDD-MDD-MDD-MDD-MDD-
10,0x10,0x10,0x10,0x10,0x10,0x10,0x
7090110130150180210
40
40
40
40
40
40
40
1. Drill a pilot hole �������� ��������������������������������� 3. Drive-in the nail with a hammer 4. Nail has to be hammered precisely into the head
1
3
2
4
19
1
1.08/2011
Rainscreen cladding
SW-T / SW3-T-H15
Self drilling fasteners
Timber substructure
SW-T / SW3-T-H15
Technical information
Application
Fastening profile steel sheeting to timber structure in one operation.
Material
Fastener
SW-TPlated carbon steel, case hardened
SW-H15Plated carbon steel, case hardened 15 mm diameter flange head
HD headform / drive
Hexagon 8 mm A/F
Tools and accessories
DI 650
Lightweight power screwgun for in-stalling self drilling and self tapping fasteners.
E480
The E480 setting tool is recom-mended for installing self drilling fasteners with the hexagon head.
Tools and accessories can be found in chapter 3
20
1
1. 03/2011
Rainscreen cladding
SW2-S / SW-T / SW3-T-H15
Self drilling fasteners
Timber substructure
Order information
KLL
d Hexagon 8 mm A/F
VD max. penetration | KL clamping length | HD headform / drive | W washer material and diameter | d thread diameter | L Length | t thickness of structure | All measures in mm
Order codeSW-T- 4,8x 35
Application Product Approval Type HD d L KL Application range
Tools and accessories can be found in chapter 3
�� Carbon steel SW-T- 4,8x 35VD max. steel:
1 x 1,0 mm3 x 0,75 mm
�� Carbon steel SW3-T- H15- 6,5x 50VD max. steel:
2 x 1,25 mm
Assembly recommendations:1 x SW3-T-H15-6,5x50 for long hole1 x SW-T-4,8x35 for normal hole
Assembly recommendations:3 x SW-T-4,8x35 for long hole Ø 6,5 mm
21
1
1.08/2011
Rainscreen cladding
SD / SD-H15
Self drilling fasteners
Steel substructure
SD / SD-H15
Technical information
Application
Fastening profile steel sheeting to steel in one operation: drilling, thread forming and sealing.
Material
Fastener
SD Plated carbon steel, case hardened
SD--H15Plated carbon steel, case hardened 15 mm diameter flange head
HD headform / drive
Hexagon 8 mm A/F
Tools and accessories
DI 650
Lightweight power screwgun for in-stalling self drilling and self tapping fasteners.
E480
The E480 setting tool is recom-mended for installing self drilling fasteners with the hexagon head.
Tools and accessories can be found in chapter 3
22
1
1. 08/2011
Rainscreen cladding
SD / SD-H15
Carbon steel self drilling fastener
Steel substructure
Order information
KLL
d Hexagon 8 mm A/F
VD max. penetration | KL clamping length | HD headform / drive | W washer material and diameter | d thread diameter | L Length | t thickness of structure | All measures in mm
Order codeSD 5- H15- 5,5x 22
Application Product Approval Type VD HD d L KL Application range
�� Carbon steel SD 5- H15- 5,5x 22 10VD
t VD max. steel: 5,0 mm
t min. steel: 1,5 mm
�� Carbon steel SD 5- 5,5x 25 12VD
t VD max. steel: 5,0 mm
t min. steel: 1,5 mm
Tools and accessories can be found in chapter 3
Assembly recommendations:1 x SD5-H15-5,5x22 for long hole1 x SD5-5,5x25 for normal hole
Assembly recommendations:2 x SD5-5,5x25 for normal hole
23
1
1.08/2011
Rainscreen cladding
SLA / SX / SDA / ASO
Self drilling fasteners
Aluminium framework
SLA / SX / SDA / ASO
Technical information
Application
Fastening aluminium framework and steel framework together within over cladding and curtain wall applications.
Material
Fastener
SLAAustenitic stainless steel, grade AISI 316 (European Standard 1.4578)
SXAustenitic stainless steel, grade AISI 304 (European Standard 1.4301) or grade AISI 316 (European Standard 1.4401) on request
ASO Body: Aluminium AIMg3 Mandrel: Stainless steel 1.4541
SDA Austenitic stainless steel, grade AISI 316 (European Standard 1.4578)
Washer
S = Stainless steel, grade AISI 304 (European Standard 1.4301)
A = Aluminium with vulcanised EPDM
Drill point and lead thread section
Case hardened, special carbon steel for SX products
milled drill point
Coloured fastener
Coloured fasteners available Colour heads are achieved through powder coating
HD headform / drive
Hexagon 8 mm A/F Low profile Ø 12 mm
Tools and accessories
DI 650
Lightweight power screwgun for in-stalling self drilling and self tapping fasteners.
E480
The E480 setting tool is recom-mended for installing self drilling fasteners with the hexagon head.
Tools and accessories can be found in chapter 3
24
1
1. 08/2011
Rainscreen cladding
SLA / SX / SDA / ASO
Self drilling fasteners
Aluminium framework
Order information
KLL
d Hexagon 8 mm A/F Low profile Ø 12 mm Coloured fastener
W: Washer material S Stainless Steel A Aluminium
VD max. penetration | KL clamping length | HD headform / drive | W washer material and diameter | d thread diameter | L Length | t thickness of structure | All measures in mm
Order codeSLA 5/ 6- S4- 6,0x 19
Application Product Approval Type VD KL HD W* d L KL Application range
�� Stainless steel A4 SLASLA
5/4-5/6-
6-8-
S4-S4-
6,0x6,0x
1921
4 - 6
6 - 8 VD max. alu: 5,0 mm
t min. alu: 1,8 mm
Only for aluminium framework
�� Stainless steel
DTU 40.35DTU 40.36
SX 3/ 9- S16- 6,0x 29 9VD max. steel:
3,0 mm
t min. steel:2 x 0,63 - 0,9 mm
t max. steel: 2,5 mm
t min. alu: 2,0 mm
�� Stainless steel
DTU 40.35DTU 40.36
SXSX
5/5/
8-12-
S16-S16-
5,5x5,5x
3337
8
12VD max. steel:
5,0 mm
t min. steel: 1,5 mm
t max. steel: 4,0 mm
t min. alu: 2,0 mm
t max. alu: 4,0 mm
�� Stainless steel SX 5/ 12- D12- 5,5x 37 12 VDt VD max. steel:
5,0 mm
t min. steel: 1,5 mm
t max. steel: 4,0 mm
t min. alu: 2,0 mm
t max. alu: 4,0 mm
Bit: T25W
Karlsruher Institut für Technologie
Tools and accessories can be found in chapter 3
25
1
1.08/2011
Rainscreen cladding
SLA / SX / SDA / ASO
Self drilling fasteners
Aluminium framework
Order codeSX 5/ 12- D12- A12- 5,5x 37
Application Product Approval Type VD KL HD W* d L KL Application range
�� Stainless steel SX 5/ 12- D12- A12- 5,5x 37 12 VDt VD max. steel:
5,0 mm
VD max. alu: 5,0 mm
t min. steel: 1,5 mm
t max. steel: 4,0 mm
t min. alu: 2,0 mm
t max. alu: 4,0 mm
Bit: T25W
�� Stainless steel A4 SDA 3/ 25-40- S4- S10/SR2- 4,8x 48 25 - 40
VD max. alu: 3,0 mm
Timber batten to aluminium
Tools and accessories can be found in chapter 3
Order code
ASO- D11- 50080
Application Product Approval Type HD Code KL min. max. d x L Application range
�� Aluminium ASO-ASO-
D11-D14-
5008050120
2,0 - 4,0
5,0 - 9,5
5,0 x 8,0
5,0 x 12,0
Head diameter D: 11,0 mm
Head diameter D: 14,0 mm
Pilot hole: Ø 5,1 mmKarlsruher Institut für Technologie
26
1
1. 08/2011
Rainscreen cladding
AP / ASO / SSO
Coloured rivets
High performance cladding to aluminium and steel framework
AP / ASO / SSO
Technical information
Application
Face fixing of high performance cladding panel to aluminium and steel framework.
Material
Rivet
APBody: Aluminium AIMg5 Mandrel: Stainless steel 1.4541
ASOBody: Aluminium AIMg3 Mandrel: Stainless steel 1.4541
Rivet
SSOBody: Stainless steel 1.4578 Mandrel: Stainless steel 1.4571
Coloured fastener
Coloured fasteners available Colour heads are achieved through powder coating
Tools and accessories
AccuBird®
For standard blind rivets 2 - 5 mm and for Bulb-tite® rivets 4 - 6,3 mm.
Lever tool RM-20
Including 4 rivet nozzles. For rivet diameter: 3,0 - 5,0 mm.
Lazy tongs RM-25
Including 4 rivet nozzles. For rivet diameter: 4,0 - 6,0 mm.
Special nosepiece for AP, ASO and SSO rivets. Fits to AccuBird® and PowerBird®.
Handle for centered drill bit Ø 5,1 mm.
Drilling gauge for centered drill holes including drill bit Ø 5,1 mm. Replaceable top pieces with
different diameters available.
Tools and accessories can be found in chapter 3
27
1
1.08/2011
Rainscreen cladding
AP / ASO / SSO
Coloured rivets
High performance cladding to aluminium and steel framework
Order information
L
d
d1 D
h
Coloured fastener
HD headform / drive | KL Grip range | d x L diameter / length | t thickness of structure | All measures in mm
Order code
AP11- 50120-S
Application Product Type HD Code KL min. max. d x L Application range
�� Aluminium AP11-AP11-
50120-S50180-S
4,0 - 8,0
9,5 - 13,5
5,0 x 12,0
5,0 x 18,0 Head diameter D: 11,0 mm
Pilot hole: Ø 5,1 mm
�� Aluminium AP14-AP14-AP14-AP14-
50120-S50160-S50180-S50210-S
4,0 - 8,0
8,0 - 12,0
9,5 - 13,5
12,5 - 16,0
5,0 x 12,0
5,0 x 16,0
5,0 x 18,0
5,0 x 21,0
Head diameter D: 14,0 mm
Pilot hole: Ø 5,1 mm
�� Aluminium AP16-AP16-AP16-
50160-S50180-S50210-S
8,0 - 12,0
9,5 - 13,5
12,5 - 16,0
5,0 x 16,0
5,0 x 18,0
5,0 x 21,0Head diameter D: 16,0 mm
Pilot hole: Ø 5,1 mm
�� Aluminium ASO-ASO-ASO-ASO-ASO-ASO-ASO-
D11-D11-D11-D11-D11-D11-D11-
50080501005012050140501605018050200
2,0 - 4,0
4,0 - 6,0
5,0 - 9,5
8,0 - 10,0
10,0 - 12,0
12,0 - 14,0
14,0 - 16,0
5,0 x 8,0
5,0 x 10,0
5,0 x 12,0
5,0 x 14,0
5,0 x 16,0
5,0 x 18,0
5,0 x 20,0
Head diameter D: 11,0 mm
Pilot hole: Ø 5,1 mm
�� Aluminium ASO-ASO-ASO-ASO-ASO-ASO-ASO-
D14-D14-D14-D14-D14-D14-D14-
50080501005012050140501605018050200
2,0 - 4,0
4,0 - 6,0
5,0 - 9,5
8,0 - 10,0
10,0 - 12,0
12,0 - 14,0
14,0 - 16,0
5,0 x 8,0
5,0 x 10,0
5,0 x 12,0
5,0 x 14,0
5,0 x 16,0
5,0 x 18,0
5,0 x 20,0
Head diameter D: 14,0 mm
Pilot hole: Ø 5,1 mm
�� Stainless steel A4 SSO-SSO-SSO-
D15-D15-D15-
501405018050220
6,0 - 9,5
9,0 - 13,5
13,0 - 18,0
5,0 x 14,0
5,0 x 18,0
5,0 x22,0Head diameter D: 15,0 mm
Pilot hole: Ø 5,1 mm
Tools and accessories can be found in chapter 3
28
1
1. 08/2011
Rainscreen cladding
Order information
f
d
L
d diameter | L Length | F working length | t thickness of structure | All measures in mm
Example order codeHSS- 5,10x 62
Type d L f Application range
HSS- 5,10x 62
Tools and accessories can be found in chapter 3
30
1
1. 08/2011
Rainscreen cladding
SLA-D12
Self drilling fasteners
Aluminium framework
Tools and accessories can be found in chapter 3
SLA-D12
Technical information
Application
Selfdrilling fastener for aluminium composite panels to aluminium framework.
Material
Fastener
SLA-D12Austenitic stainless steel, grade AISI 304 (European Standard 1.4301)
Coloured fastener
Coloured fasteners available Colour heads are achieved through powder coating
HD headform / drive
Low profile Ø 12 mm
Tools and accessories
DI 650
Lightweight power screwgun for in-stalling self drilling and self tapping fasteners.
ZA 1/4‘‘
Universal socket to adapt different bits.
T20W Bit
Special T20 wedge bit for perfect fit on SFS intec painted fastener.
31
1
1.08/2011
Rainscreen cladding
SLA-D12
Tools and accessories can be found in chapter 3
Order information
KLL
d Low profile Ø 12 mm Coloured fastener
VD max. penetration | KL clamping length | HD headform / drive | W washer material and diameter | d thread diameter | L Length | t thickness of structure | All measures in mm
Order codeSLA 3/ 6- S-D12- 4,8x 19
Application Product Type VD KL HD d L KL Application range
�� Stainless steel SLA 3/ 6- S-D12- 4,8x 19 6VD max. alu:
3,0 mm
Only for aluminium framework����������������������������������Bit: T20W
Self drilling fasteners
Aluminium framework
32
1
1. 08/2011
Rainscreen cladding
TW-S / TW-A4
Austenitic stainless steel fasteners for timber battens
Non metallic high performance cladding panel to timber batten
TW-S / TW-A4
Technical information
Application
Non metallic high performance cladding panel to timber batten.
Material
Fastener
TW-SAustenitic stainless steel, grade AISI 304 (European Standard 1.4301) with powder coated colour finish.
TW-A4Austenitic stainless steel, grade AISI 316 (European Standard 1.4578)
Washer
A = Aluminium with vulcanised EPDM
Coloured fastener
Coloured fasteners available Colour heads are achieved through powder coating
HD headform / drive
Low profile Ø 12 mm Low profile Ø 16 mm
Tools and accessories
DI 650
Lightweight power screwgun for in-stalling self drilling and self tapping fasteners.
ZA 1/4‘‘
Universal socket to adapt different bits.
T20W Bit
Special T20 wedge bit for perfect fit on SFS intec painted fastener.
Tools and accessories can be found in chapter 3
33
1
1.08/2011
Rainscreen cladding
TW-S / TW-A4
Austenitic stainless steel fasteners for timber battens
Non metallic high performance cladding panel to timber batten
Order information
KLL
d Low profile Ø 12 mm Low profile Ø 16 mm Coloured fastener
VD max. penetration | KL clamping length | HD headform / drive | W washer material and diameter | d thread diameter | L Length | t thickness of structure | All measures in mm
Order codeTW-S- D12- 4,8x 38
Application Product Type HD W* d L KL Application range
�� Stainless steel TW-S- D12- S12- 4,8x 38
Bit: T20W
�� Stainless steel TW-S-TW-S-TW-S-TW-S-TW-S-
D12-D12-D12-D12-D12-
4,8x4,8x4,8x4,8x4,8x
2530384460
Bit: T20W
�� Stainless steel TW-S- D16- 4,8x 38
Bit: T20W
�� Stainless steel A4 TW-A4- D12- 4,8x 38
Bit: T20W
Tools and accessories can be found in chapter 3
34
1
1. 08/2011
Rainscreen cladding
EPDM
Thermal separation of structural components
Sealing joint
EPDM
Product advantages
extremely resistant to weathering and heat
highly elastic dimensionally stable, even at high temperatures
optional self-adhesive on one side to facilitate application
Technical information
Application
The dimensionally stable sealing tape is used for curtain walling to facades
Material
Elastomer sheet made of EPDM rubber
Colour
Black
Technical details
Item DIN Characteristics
Class of building material 4102 B2 (normally flammable)
Vapour diffusion resistance –40°C to +130°C
Processing temperature +5°C to +35°C
Shelf life 2 years
Storage temperature +5°C to +25°C
Order information
Order codeEPDM- 60/ 0,7
Type tape width tape thickness box capacity m/roll
EPDM- 60/ 0,7 25 25EPDM-EPDM-EPDM-
100/Adhesive-60/Adhesive-100/
0,70,70,7
252525
252525
Tools and accessories can be found in chapter 3
35
1
1.08/2011
Rainscreen cladding
SX
Stainless steel self drilling fasteners
Steel substructure
SX
Technical information
Application
Stainless steel fastening of steel or facade panels to steel or aluminium structure in one operation: drilling, thread forming and secure fastening.
Material
Fastener
SXAustenitic stainless steel, grade AISI 304 (European Standard 1.4301)
Washer
S = Stainless steel, grade AISI 304 (European Standard 1.4301)
Drill point and lead thread section
Case hardened, special carbon steel
Coloured fastener
Coloured fasteners available Colour heads are achieved through powder coating
HD headform / drive
Low profile Ø 12 mm irius® Ø 12 mm
Tools and accessories
DI 650
Lightweight power screwgun for in-stalling self drilling and self tapping fasteners.
E420
The E420 setting tool for installing self drilling fasteners with the irius® system.
ZA 1/4‘‘
Universal socket to adapt different bits.
L
Ø 12
d d
L
Ø 12
Special carbon steelcase hardenend
Special carbon steelcase hardenend
Tools and accessories can be found in chapter 3
T25W Bit
Special T25 wedge bit for perfect fit on SFS intec painted fastener.
36
1
1. 08/2011
Rainscreen cladding
SX
Stainless steel self drilling fasteners
Steel substructure
Order information
KLL
dirius®
Ø 12 mmLow profile Ø 12 mm
Low profile Ø 10 mm
Coloured fastener
W: Washer material S Stainless Steel
* Select Washer 16 mm for cladding
VD max. penetration | KL clamping length | HD headform / drive | W washer material and diameter | d thread diameter | L Length | t thickness of structure | All measures in mm
Order codeSX 3/ 15- L12- S16- 5,5x 32
Application Product Approval Type VD KL HD W* d L KL Application range
�� Stainless steel SX 3/ 15- L12- S16- 5,5x 32 15VD max. steel:
3,0 mm
t max. steel: 2,5 mm
�� Stainless steel SX 3/ 11- D10- 4,8x 24 11VD max. steel:
3,0 mm
t max. steel: 2,5 mm
Bit: T20W
�� Stainless steel SX 3/ 15- D12- 5,5x 30 15VD max. steel:
3,0 mm
t max. steel: 2,5 mm
Bit: T20W
Tools and accessories can be found in chapter 3
37
1
1.08/2011
Rainscreen cladding
GA-AS / GA-BS
Stainless steel self tapping fasteners
Special aesthetical fastening
GA-AS / GA-BS
Technical information
Application
To fix any kind of cladding panels to timber, steel or aluminium sub-frames. A choice of colours and shapes for fascinating effects Choose from the range of shapes and colours to create special emphasis on internal or external surfaces. Achieve tonal features through the use of anodised aluminium and polished stainless materials. The thread onto which the head element is screwed is coated with spedcaps micro-encapsulated liquid adhesive. The adhe-sive cures within a few hours of installation and the design element is secured against unwinding through dynamic loads. It cannot be removed manually after curing.
Material
Fastener
GA-AS / GA-BSStainless steel, grade AISI 304 (European Standard 1.4301) C = Spedcaps coating GAZ: design elements A = Aluminium anodised S = Stainless steel grade 316, 1.4404
Washer
S = Stainless steel, grade AISI 304 (European Standard 1.4301)
HD headform / drive
Hexagon: 3/8"~ 9,5 mm A/F Special socket required E395
Tools and accessories can be found in chapter 3
38
1
1. 08/2011
Rainscreen cladding
GA-AS / GA-BS
Stainless steel self tapping fasteners
Special aesthetical fastening
Order information
KLL
d Hexagon: 3/8"~ 9,5 mm A/F
VD max. penetration | KL clamping length | HD headform / drive | W washer material and diameter | d thread diameter | L Length | t thickness of structure | All measures in mm
Order codeGA-AS- S16- 6,5x 45
Application Product Type W* d L KL Application range
�� Stainless steel GA-AS- S16- 6,5x 45-C
Hexagon: 3/8"~ 9,5 mm A/FThreaded part: M8 x 11 mm
Recommended pilot hole diameter: t in mm: pilot hole in mm: 1,0 – 1,25 4,50 1,5 – 3,00 5,00 wood 4,80
�� Stainless steel GA-BS- S16- 6,3x 32-C
Hexagon: 3/8"~ 9,5 mm A/FThreaded part: M8 x 11 mm
Recommended pilot hole diameter: t in mm: pilot hole in mm: 1,5 – 4,0 5,30 4,1 – 6,0 5,50 6,0 – 10,0 5,70 > 10,0 5,80
GAZ-801- GAZ-803-* GAZ-804- GAZ-806- GAZ-807- GAZ-811-
Ø 22 x 32 mm
Available in the following colors: Aluminium: red, blue, green, black, gold, silver* on special request Stainless steel: mill finish
Ø 42 x 28 mm Ø 22 x 32 mm Ø 32 x 38 mm Ø 32 x 32 mm Ø 22 x 32 mm
Tools and accessories can be found in chapter 3
39
1
1.08/2011
Rainscreen cladding
SCFW-S
Self drilling fasteners
Non metallic high performance cladding panel to timber batten
SCFW-S
Technical information
Application
Self drilling fastener for non metallic high performance cladding panel to timber batten.
Material
Fastener
SCFW-SAustenitic stainless steel, grade AISI 304 (European Standard 1.4301)
Washer
A = Aluminium with vulcanised EPDM
Coloured fastener
Coloured fasteners available Colour heads are achieved through powder coating
HD headform / drive
Low profile Ø 10 mm
Tools and accessories
DI 650
Lightweight power screwgun for in-stalling self drilling and self tapping fasteners.
ZA 1/4‘‘
Universal socket to adapt different bits.
T20W Bit
Special T20 wedge bit for perfect fit on SFS intec painted fastener.
Tools and accessories can be found in chapter 3
40
1
1. 08/2011
Rainscreen cladding
SCFW-S
Self drilling fasteners
Non metallic high performance cladding panel to timber batten
Order information
KLL
d Low profile Ø 10 mm Coloured fastener
VD max. penetration | KL clamping length | HD headform / drive | W washer material and diameter | d thread diameter | L Length | t thickness of structure | All measures in mm
Order codeSCFW-S- D10K- A12- 5,0x 40
Application Product Type HD W* d L KL Application range
�� Stainless steel SCFW-S- D10K- A12- 5,0x 40 8
Bit: T20W
Wings diameter: 6,2 mm
Tools and accessories can be found in chapter 3
41
1
1.08/2011
Rainscreen cladding
SDF2-S
Austenitic stainless steel fastener
Non metallic high performance cladding to steel framework
SDF2-S
Technical information
Application
Self drilling fastener for non metallic high performance cladding panel to thin steel framework.
Material
Fastener
SDF2-SAustenitic stainless steel, grade AISI 304 (European Standard 1.4301) with powder coated colour finish.
Coloured fastener
Coloured fasteners available Colour heads are achieved through powder coating
HD headform / drive
Low profile Ø 10 mm
Tools and accessories
DI 650
Lightweight power screwgun for in-stalling self drilling and self tapping fasteners.
Tools and accessories can be found in chapter 3
42
1
1. 08/2011
Rainscreen cladding
SDF2-S
Austenitic stainless steel fastener
Non metallic high performance cladding to steel framework
Order information
KLL
d Low profile Ø 10 mm Coloured fastener
VD max. penetration | KL clamping length | HD headform / drive | W washer material and diameter | d thread diameter | L Length | t thickness of structure | All measures in mm
Order codeSDF2-S- D10- 4,5x 24
Application Product Type HD d L KL Application range
�� Stainless steel SDF2-S- D10- 4,5x 24 6 - 14VD max. steel:
1,25 mm
t min. steel: 0,7 mm
�������������������������������������������������������� at any point ��������� ����������������������-Thread forming after penetration of the subframe��������������������������������������������
Bit: T20W
Tools and accessories can be found in chapter 3
43
1
1.08/2011
Rainscreen cladding
TU-S
Blind fasteners
Blind fastening of HPL-cladding panels
TU-S
Technical information
Application
The TU-S blind fastener is superior to previous approaches to the attachment of HPL cladding panels with regards installation and long-term security.
Material
Fastener
TU-SBody: Stainless steel, grade AISI 316 (European Standard 1.4401) Mandrel: Carbon steel (removed completely)
Tools and accessories
PowerBird®
Standard blind rivets: Alu 4,8 - 8 mm, Steel: 4,8 - 6,4 mm. Bulb-tite® rivets 4 - 7,7 mm.
TU-S-6,0 x L
Drill bit with depth locator
Drill bit: 6,0x80 for TU-S-6,0xL
Tools and accessories can be found in chapter 3
44
1
1. 08/2011
Rainscreen cladding
TU-S
Blind fasteners
Blind fastening of HPL-cladding panels
Order information
L
d
d1 D
h
Hexagon 8 mm A/F
VD max. penetration | KL clamping length | HD headform / drive | W washer material and diameter | d thread diameter | L Length | t thickness of structure | All measures in mm
Order code
TU-S- 6,0x 9
Application Product Approval Type d L KL Application range
�� Stainless steel A4 TU-S-TU-S-TU-S-
6,0x6,0x6,0x
91113
0.5 - 3.5
0.5 - 5.5
2.5 - 7.5
HSS pilot hole, 6 mm dia. with depth stopAnchorage depth min. 6,5 mm For HPL panels between 8,0 - 13,0 mm thickness
Set the TU-S with a PowerBird® and nose piece 17/36
Tools and accessories can be found in chapter 3
45
1
1.08/2011
Rainscreen cladding
PFS-K-Aluminium
Profiles
Aluminium framework
PFS-K-Aluminium
Technical information
Application
Assures a perfect finish of the corners.
Material
Profile
PFS-K-AluminiumAluminium: crude, hot varnished on the basis of the colour of the panels
Coloured fastener
Coloured Profile available
Order Code
PFS-K-A- 10/10
Application Product Type axb KL Application range
PFS-K-A-PFS-K-A-PFS-K-A-PFS-K-A-
10/1018/1829/2940/40
� 10
� 18
� 29
� 40
��� �������������!� ��#���$��%���&����!�� � ��#�'�$����
�� Aluminium
Tools and accessories can be found in chapter 3
46
1
Rainscreen cladding
PFS-Q-Aluminium
Profiles
Aluminium framework
PFS-Q-Aluminium
Technical information
Application
Assures a perfect finish of the corners.
Materiale
Profile
PFS-K-AluminiumAluminium: crude, hot varnished on the basis of the colour of the panels
Coloured fastener
Coloured Profile available
Order Code
PFS-Q-A- 10/10
Application Product Type axb KL Application range
PFS-Q-A-PFS-Q-A-
10/1018/18
� 10
� 18 ��� �������������!� ��#���$��%���&����!�� � ��#�'�$����
�� Aluminium
08/20111.
Tools and accessories can be found in chapter 3
47
1
1.08/2011
Rainscreen cladding
PFR-Aluminium
Profiles
Aluminium framework
PFR-Aluminium
Technical information
Application
Assures a perfect finish of the corners.
Material
Profile
PFR-AluminiumAluminium: crude, hot varnished on the basis of the colour of the panels
Coloured fastener
Coloured Profile available
Order Code
PFR-A- 10/10
Application Product Type axb KL Application range
PFR-A-PFR-A-PFR-A-
10/1015/1518/18
� 10
� 15
� 18��� �������������!� ��#���$��%���&����!�� � ��#�'�$����
�� Aluminium
Tools and accessories can be found in chapter 3
48
1
Rainscreen cladding
PF-Z-Aluminium
Profiles
Aluminium framework
PF-Z-Aluminium
Technical information
Application
Assures a perfect finish of the corners.
Materiale
Profile
PFS-K-AluminiumAluminium: crude, hot varnished on the basis of the colour of the panels
Coloured fastener
Coloured Profile available
Order Code
PF-Z-A- 40/8/10
Application Product Type axb KL Application range
PF-Z-A-PF-Z-A-
40/8/1040/10/10
� 8
� 10 ��� �������������!!� ��#���$��%���&����!�� � ��#�'�$����
�� Aluminium
08/20111.
Tools and accessories can be found in chapter 3
49
1
1.08/2011
Rainscreen cladding
PV-Aluminium
Profiles
Aluminium framework
PV-A- 30x30
Application Product Type hxl KL Application range
PV-A-PV-A-PV-A-PV-A-PV-A-PV-A
PV-A-PV-A-PV-A-PV-A-PV-A-PV-A-PV-A-PV-A-PV-A-PV-A-PV-A-
30x3030x4030x5030x6030x7030x90
40x10040x12040x14040x16040x18040x20040x22040x24040x26040x28040x300
��� �������������!� ��#���(��%���&����!�� � ��#�'�$����
�� Aluminium
PV-Aluminium
Technical information
Application
Assures air ventilation of the facade and guard against rodent.
Material
Profile
PV-AluminiumAluminium: crude
Coloured fastener
Coloured Profile available
Order Code
L
l
h
e
Tools and accessories can be found in chapter 3
108/2011
2
ALW-S1
ALW-S2
ALW-D
ALW-L1
ALW-L2
2
2.
Clamping System ALW Clamping System ALW
Facade system ALW
2 08/2011
2
2.
Clamping System ALW
ALW-S1
Clamping System ALW
ALW-S1
Simple, tried and trusted and timesaving.The ALW-S clamping system has already been used in amyriad of projects, both at home and abroad. The glass used can be anything from 8 to 18 mm thick, depending on the application. No glass drilling is required for completelysecure installation. We can even provide complete staticcalculations based on standard BS 6399, mandatorysince January 1. 2007. All components also conform to building regulations through adherence to BS 8118. Installing the clamps and fitting glass panels on site is made much easier by the fact that tolerances in the support structure can be taken up by adjustments in every direction: simple and time-saving.
SFS code: ALW-S1-O-RAL9006 ALW-S1-O-EV1Description: Single upper clamp for fixing one
pane, aluminium and EPDM insertsGlass thickness: 8 - 18 mmMax glass size: 2500 x 1200 mm*Colour: RAL - 9006 ** Anodised
aluminium EV1**
SFS code: ALW-S1-M-RAL9006 ALW-S1-M-EV1Description: Single central clamp for fixing two
panes, aluminium and EPDM insertsGlass thickness: 8 - 18 mmMax glass size: 2500 x 1200 mm*Colour: RAL - 9006 ** Anodised
aluminium EV1**
SFS code: ALW-S1-U-RAL9006 ALW-S1-U-EV1Description: Single lower clamp for fixing one
pane, aluminium and EPDM insertsGlass thickness: 8 - 18 mmMax glass size: 2500 x 1200 mm*Colour: RAL - 9006 ** Anodised
aluminium EV1**
15,00 40,00 15,00
70,00
70,00
5242
15,00 40,00 15,00
70,00
142
80
52
149
80
57
149
80
57
* The values indicated are for guidance only.** The clamping system is available in RAL colours or anodised. This choice makes a project-co-ordinated colour match possible.
upper
central
lower
308/2011
2
2.
Clamping System ALW
ALW-S2
Clamping System ALW
149
80
57
142
80
52
149
80
57
ALW-S2
Simple, tried and trusted and timesaving.The ALW-S clamping system has already been used in amyriad of projects, both at home and abroad. The glass used can be anything from 8 to 18 mm thick, depending on the application. No glass drilling is required for completelysecure installation. We can even provide complete staticcalculations based on standard BS 6399, mandatorysince January 1. 2007. All components also conform to building regulations through adherence to BS 8118. Installing the clamps and fitting glass panels on site is made much easier by the fact that tolerances in the support structure can be taken up by adjustments in every direction: simple and time-saving.
SFS code: ALW-S2-O-RAL9006 ALW-S2-O-EV1Description: Twin upper clamp for fixing two
adjacent panes, aluminium andEPDM inserts
Glass thickness: 8 - 18 mmMax glass size: 2500 x 1200 mm*Colour: RAL - 9006 ** Anodised
aluminium EV1**
SFS code: ALW-S2-M-RAL9006 ALW-S2-M-EV1Description: Twin central clamp for fixing four
adjacent panes, aluminium andEPDM inserts
Glass thickness: 8 - 18 mmMax glass size: 2500 x 1200 mm*Colour: RAL - 9006 ** Anodised
aluminium EV1**
SFS code: ALW-S2-U-RAL9006 ALW-S2-U-EV1Description: Twin lower clamp for fixing two
adjacent panes, aluminium andEPDM inserts
Glass thickness: 8 - 18 mmMax glass size: 2500 x 1200 mm*Colour: RAL - 9006 ** Anodised
aluminium EV1**
40,0015,00 15,00
140,00
70,00
4253
40,0015,00 15,00
140,00
* The values indicated are for guidance only.** The clamping system is available in RAL colours or anodised. This choice makes a project-co-ordinated colour match possible.
upper
central
lower
4 08/2011
2
2.
Clamping System ALW
ALW-D
Clamping System ALW
ALW-D (double clamping)
At last: double-overlapped glass panels.The further advanced ALW-D system offers applicationpotential for double-clamped installations. All the existingfeatures and benefits of the tried and trusted ALW-Sclamping system are enhanced by this additionaladvantage. The panes are not just horizontally but alsovertically overlapped. The absence of vertical joins createsa very attractive façade finish. Overlapping of the panes canbe either parallel or with a lateral displacement.
SFS code Description
ALW-D-M-U ALW - double lowerALW-D-R-O ALW - double-right upperALW-D-R-M ALW - double-right central
upper
167
80
52
6
central
176
80
57
6
right
central
left
70
40
70
Description: ALW - double, aluminium andEPDM inserts
Glass thickness: 8 - 18 mmMax glass size: max. 2500 x 1200 mm*Colour: RAL - 9006 ** Anodised
aluminium EV1**
* The values indicated are for guidance only.** The clamping system is available in RAL colours or anodised. This choice makes a project-co-ordinated colour match possible.
176
80
57
6
lower
508/2011
2
2.
Clamping System ALW
ALW-D
Clamping System ALW
ALW-D (double clamping)
ALW-D-R-Oupper retainer,
short
ALW-D-L-Oupper retainer,
long
ALW-D-R-Oupper retainer,
short
ALW-D-L-Oupper retainer,
long
ALW-D-L-Mcentral retainer,
long
ALW-D-M-M ALW-D-R-Mcentral retainer,
short
ALW-D-L-Ulower retainer,
long
ALW-D-M-U ALW-D-R-Ulower retainer,
short
connected by a 6mm plate
Example: facade right sloping (front view)
ALW-D-M-Oconsisting of:
* A
sta
tic c
alcu
latio
n m
ust
be u
nder
take
n fo
r ev
ery
appl
icat
ion
6 08/2011
2
2.
Clamping System ALW
ALW-D
Clamping System ALW
ALW-D (double clamping)
Example: View lower retainer
left sloping
right sloping
parallel
View from above
7070
10
10
40
240
6
70
7038
70
70 38
ALW-D-M-Uconsisting of:
ALW-D-R-Ulower retainer,
short
ALW-D-R-Ulower retainer,
short
ALW-D-L-Ulower retainer,
long
ALW-D-L-Ulower retainer,
long
connected by a 6 mm plate
20
708/2011
2
Single and double retainers for fitting two or four glass panels; aluminium anodised EV1 or powder coated RAL 9006; with EPDM seal
ESG6, ESG6 enamelledESG8, ESG8 enamelled
0,4 - 2,9 kN/m2*
1200 mm x 1000 mm2400 x 500 mm
ALW-Light is ideal for installing light-weight glass panels onto aluminium sub-frames. It is characterised by ease–of-use and easy adaptation to any pane size. Fixing to the sub-frame is achieved with corrosion-proof power tool fasteners. Each glass panel is held in place by the positioning of the neighbouring pane, secured by shims. The glass is secured in place without drilling. Clamps are available in anodised aluminium EV1 or any RAL colour.
ALW-Light has a full static type approval to DIN 18516.
There is no need for individual building regulations approval.
ALW-L1-Oupper single clamp
ALW-L1-Mmid single clap
ALW-L1-Ulower single clamp
ALW-L2-OUpper double clamp
ALW-L2-Mmid couble clamp
ALW-L2-Ulower double clamp
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
-5
-5
+5
+5
Front view
Adjustments
View from above
55
83
49
100
* The values indicated are for guidance only.** The clamping system is available in RAL colours or anodised. This choice makes a project-co-ordinated colour match possible.
50 50
SFS code:
Discription:
Glass thickness:
Wind strength:
Max. glass surface:
ALW-L1 // ALW-L2
2.
Clamping System ALW
ALW-L1 / ALW-L2
Clamping System ALW
908/2011
2
Canopy System VDS
Canopy Systems VDS VDS kit Large
VDS kit Medium
VDS kit Small
Single components
2.
10 08/2011
2
2.
Canopy System VDS
VDS
Canopy System VDS
Assembly instructions:
Fixing positions should be detailed accurately using suitable measuring tools.
Please note that building regulations may well apply. The customer is responsible for all building approvals. A structural engineer should be consulted to agree all loadings and substructure fixing types.Quoted prices do not include calculating loadings and fixing types. Fasteners to the substructure should be fixed in accordance with the manufacturer‘s recommendations and technical values
Assembly and loadings:
All masonry anchors i.e. chemical and expansion anchors should be installed in accordance with the manufacturer‘s instructions dependant upon the substrate.
Plates should be attached using the appropriate fastener.
The threaded connecting rod is positioned onto the upper fastening plate and is secured with a stainless steel pin. A safety retaining ring is then fixed in place.
Glass point fixing: place the male threaded portion through the bore hole in the glass and screw on, from beneath, the female part of the point fixing. Please note that the orientation is correct to align with the coupling on the lower end of the connecting rod. The thread pin must be secured with thread-locking adhesive. Then fit the glass pane into the lower wall bracket and secure it with bolts and retaining rings.
Insert the connecting rod into the front point fitting and secure it by slotting the split pin into the bolt.
The canopy is then adjusted by turning the connectingrod. The nuts must be locked and secured with thread-locking adhesive.
should be provided by the supplier. All flat washers used between the glass plates and fittings are UV resistant. All parts should be professionally assembled and adjusted. The canopy can be adjusted up to +/- 20 mm by way of the connecting rods. Once adjusted the connected rods should be locked to avoid misalignment. The canopies are not accessible for cleaning purposes.
1108/2011
2
2.
Canopy System VDS
VDS
Canopy System VDS
1659
mm
(46)
1564
mm
(42)
1458
mm
(39)
1337
mm
(34)
1304
mm
(46)
1205
mm
(41)
1092
mm
(36)
1400 mm1500 mm1600 mm 1700 mm1800 mm1900 mm2000 mm
connecting rodmiddle eye to eye
Z5: 2100 mm
connecting rodmiddle eye to eye
Z4: 1615mm
95°
For standard sizes, static calculations are available.
SFS code: VDS-80-LargeDescription: Set canopy system LargeContaining: 2x upper wall bracket (VDS-WO)
2x connection rod (Z4/Z5)4x point fitting Ø 80 mm (VDS-80-ALP80)2x lower wall bracket (VDS-WU)
Glass thickness: Laminated safety glass,2 x 10 mm heat strengthened
Angle of the glass:
max. 10°
Angle of the rods:
30° - 46°
Bore holes: 30 mm
VDS-80-Large
2000
1900
1800
1700
1600
1500
1400 350
350
2000
7272
7272
7272
72
7272
7272
7272
72
30
* A
sta
tic c
alcu
latio
n m
ust
be u
nder
take
n fo
r ev
ery
appl
icat
ion
12 08/2011
2
2.
Canopy System VDS
VDS
Canopy System VDS
For standard sizes, static calculations are available.
SFS code: VDS-60-MediumDescription: Set canopy system MediumContaining: 2x upper wall bracket (VDS-WO)
2x connection rod (Z3)4x point fitting Ø 60 mm (VDS-60-ALP60)2x lower wall bracket (VDS-WU)
Glass thickness: Laminated safety glass,2 x 10 mm heat strengthened
Slope of the roof:
max. 10°
Slope of the rods:
30° - 46°
Bore holes: 26 mm
VDS-60-Medium
905
mm
(41°
)
770
mm
(30°
)
connecting rodmiddle eye to eye
Z3: 1250mm
1300
1200
300
300
1800
72
72
72
72
26
95°
1200 mm
1300 mm
* A
sta
tic c
alcu
latio
n m
ust
be u
nder
take
n fo
r ev
ery
appl
icat
ion
1308/2011
2
2.
Canopy System VDS
VDS
Canopy System VDS
SFS code: VDS-45-SmallDescription: Set canopy system SmallContaining: 2x upper wall bracket (VDS-WO)
2x connection rod (Z1/Z2)4x point fitting Ø 45 mm (VDS-45-ALP45)2x lower wall bracket (VDS-WU)
Glass thickness: Laminated safety glass,2 x 8 mm heat strengthened
Slope of the roof:
max. 10°
Slope of the rods:
30° - 46°
Bore holes: 22 mm
VDS-45-Small
900
800
300
200
1600
72 72
22
1100
1000
300
250
1600
72 72
22
72 72
680
mm
(41°
)
550
mm
(30°
)
connecting rodmiddle eye to eye
Z2: 1000mm
95°
800 mm900 mm
connecting rodmiddle eye to eye
Z1: 820mm
1000 mm1100 mm
770
mm
(39°
)
640
mm
(30°
)
* A
sta
tic c
alcu
latio
n m
ust
be u
nder
take
n fo
r ev
ery
appl
icat
ion
14 08/2011
2
2.
Canopy System VDS
VDS
Canopy System VDS
Single components
SFS code: VDS-WODescription: upper standard wall bracket
suitable for all 3 canopy sets
Single components
SFS code: VDS-45/60/80 (Z1; Z2; Z3; Z4; Z5)Description: connecting rod with yoke
Please quote requested length Z1 - Z5 or special length
Single components
SFS code: VDS-80-ALP80Description: point fixing Ø 80 mm with connector
for canopy set LARGE
Single components
SFS code: VDS-60-ALP60Description: point fixing Ø 60 mm with connector
for canopy set MEDIUM
Single components
SFS code: VDS-45-ALP45Description: point fixing Ø 45 mm with connector
for canopy set SMALL
Single components
SFS code: VDS-WUDescription: lower standard wall bracket
suitable for all 3 canopy sets
Ø11
50
110
80
10
Ø
35
70
39
M12
38
26
82
102
Ø80
36
24
Ø60
82
2
10
M10
Ø22
Ø16
/20
Ø11
110
50
80
10 24
36
10
2
2
6
24
Ø45
M10
* A
sta
tic c
alcu
latio
n m
ust
be u
nder
take
n fo
r ev
ery
appl
icat
ion
1508/2011
2
2.
Canopy System VDS
VDS
Canopy System VDS*
A s
tatic
cal
cula
tion
mus
t be
und
erta
ken
for
ever
y ap
plic
atio
n
Variants of wall bracket
Variants of wall bracket
Variants of wall bracket
Variants of wall bracket
150
120
15
15Ø13
10
Ø35
70
39
10
150
150
120
15
15Ø13
Ø150
120
15
Ø1310
Ø35
70
39
Ø150
120
15
Ø13 10
150
SFS code: VDS-WO RundDescription: upper wall bracket, round design
suitable for all 3 canopy sets
SFS code: VDS-WU RundDescription: lower wall bracket, round design
suitable for all 3 canopy sets
SFS code: VDS-WO QuadratDescription: upper wall bracket, square design
suitable for all 3 canopy sets
SFS code: VDS-WU QuadratDescription: lower wall bracket, square design
suitable for all 3 canopy sets
1
3
9
3.08/2011
Tools and accessories Tools and accessories
3Application Product code Page
Self drilling
self tapping fastenersDI 650 � 3.2
Concrete drilling DB 620 � 3.3
For rivets
Lazy tongs
RM-25 � 3.4
Lever tool
RM-20 � 3.4
AccuBird® � 3.5
PowerBird® � 3.5
2
3
3. 08/2011
Tools and accessories
DI 650
Setting tool and accessories
Self drilling and self tapping fasteners
DI 650
Application
Lightweight power screwgun for installing self drilling and self tapping fasteners.
Technical details
Power Tool: DI 650Wattage: 650 WMax. revs: 2000 rpmPower Supply: 110V / 230VMax. torque: 20 NmOverall length: 290 mmWeight: 1,6 kg
Tools and accessories
3
3
3.08/2011
Tools and accessories
DB 620
Hammer drilling machine
Concrete drilling
DB 620
Application
Hammer drilling machine for pre-drilling concrete and masonryTechnical details
Wattage: 620 WMax. revs: 870 rpmPower Supply: 110V / 230VWeight: 2,4 kgDrive connection: SDS-Plus
4
3
3. 08/2011
Tools and accessoriesRivet tool
For rivets
Lazy tongs RM-25 / Lever tool RM-20
Lazy tongs RM-25
Application
Including 4 rivet nozzles. For rivet diameter: 4,0 - 6,0 mm.
Lever tool RM-20
Application
Including 4 rivet nozzles. For rivet diameter: 3,0 - 5,0 mm.
5
3
3.08/2011
Tools and accessories
AccuBird® / PowerBird®
For standard blind rivets and for Bulb-tite® rivets
For rivets
AccuBird®
Application
For standard blind rivets 2,0 - 5,0 mm.For Bulb-tite® rivets 4,0 - 6,3 mm.
Technical details
Weight: 2,2 KgPulling distance: 20 mmBattery: 14,4 Volt, Li-Ion 1,3 AhCharging: 60 min.Pulling strenght: 8500 NFor Rivet diameter: 2,0 - 5,0 mm
PowerBird®
Application
Standard blind rivets: Alu 4,8 - 8,0 mm, Steel: 4,8 - 6,4 mm. Bulb-tite® rivets 4,0 - 7,7 mm.
Technical details
Weight: 2,2 KgPulling distance: 20 mmBattery: 14,4 Volt, Li-Ion 2,6 AhCharging: 60 min.Pulling strenght: 13000 NFor Rivet diameter: 4,8 - 6,4 mm
4.A
4
Business Solutions by SFS intec:
Individual solutions tailored to your needs.
Business Solutions Roofing and Cladding
We live in a complex, constantly changing business environment which presents us with numerous challenges in our day-to-day work. Simple, lean processes, enhancing efficiency and – not least – cost and time savings are important themes.
SFS intec is a committed partner, adopting a holistic approach and not merely supplying products. Our efforts are directed towards successfully addressing the challenges arising in day-to-day business with tailor-made supplementary services.
Our thoughtfully devised portfolio of solutions is adapted to the differing requirements of market participants. Whether for small and medium-sized businesses, industrial customers, dealers or system manufacturers: Business Solutions by SFS intec cater to a wide diversity of needs. Further-more, they are designed in such a way that they can be adapted individually to your specific requirements.
Take as well advantage of the benefits of our Business Solutions
and be further informed in a personal meeting.
Business Solutions by SFS intec offer you the following benefits:
��Information transparency��Controlled supply chain processes��Many years of experience in supply chain management
��Rapid, efficient ordering��Optimised inventory��Construction site services
��Faster order input and processing��Outsourcing of process steps��Electronic data interchange
��Simple ordering process��Information in real time��Reduction in process steps
Easy
Time-saving
Cost-saving
Secure
08/2011
4
Electronic ordering:
Fast, simple, faultless.
eFormat
Accelerate and secure the order process!
Conversion of orders into electronic messages.
��Orders take priority
��Faster order processing
��No transmission errors
eShop
Order quickly and easily online!
Website for online orders round the clock.
��Order quickly and easily
��Irrespective of time and place
��Important information at a glance (e.g. product range, previous orders, invoices)
eScan
Simplify your stock management!
Electronic ordering using a barcode scanner.
��Optimal inventory organisation and efficient ordering, including analysis and consultancy by SFS intec
��Lower procurement costs
��Fast, efficient ordering
EDI
Stay connected constantly!
Electronic data interchange between the customer’s ERP system and SFS intec‘s.
��Continuous link
��Fast, simple process
��No transmission errors
4.B 08/2011
Business Solutions Roofing and Cladding
4
Electronic information:
Always up-to-date.
ePost
Receive your documents immediately!
Electronic mailing of order acknowledgment, delivery note and invoice.
��Real-time information
��Information transmitted directly to the person responsible
��Paperless filing possible
ePortal
Information at your fingertips!
Orders and all related documents accessible at all times, including real-time delivery status and delivery confirmation.
��Full transparency
��Information available at any time and place
��Accessibility for several defined users
4.C08/2011
Business Solutions Roofing and Cladding
4
Our construction site service:
Higher on-site efficiency.
SMS Service
Delivering confidence!
Notification and confirmation of deliveries to the construc-tion site via SMS.
��High degree of transparency regarding deliveries
��No more missed deliveries
��Less time-wasting, no standstills on the construction site
Job2Job
Save costs, improve efficiency!
You order per job, we do the rest: storage, order picking, packaging, labelling, forwarding.
��Major cost savings in procurement
��Reduced inventories
��Greater convenience
Business Solutions by SFS intec:
We’d be glad to give you more information!
Are you interested in knowing more about Business Solutions by SFS intec?
Don’t hesitate to contact your customer relationship ma-nager. He’ll be pleased to organise a visit to you together with one of our Business Solutions experts!
4.D 08/2011
Business Solutions Roofing and Cladding
4
4.108/2011
Dependably well served:
Meeting your business needs - tailored solutions from SFS intec.
Services Roofing and Cladding
Partners who really
understand you:
Experts for architectural
exteriors.
The secure route to the right
fastener solution:
Simple, efficient planning aids
at every step of the project.
Always one step ahead:
An international network
with local knowledge in
every field.
Economy and security
built in:
Complete systems for every
application.
Quality you can depend on:
A network of quality-certified
plants.
Reliable performance:
Tested in-house, confirmed
on site.
The right fastening system
every time:
Technical advice and support
any time, anywhere.
High standard of delivery reli-
ability due to local presence:
Global supply chain
management.
4
Structural timber and glulam beams
Hinge systems fordoors and windows
Ventilated curtain walling
Fastening systems for doors and windows
Fastening cassettesystems
Fastening com- posite panels
Post-and-rail joints
Glass attachment
Fastening flat roofs
Perimeter zones
1 2 3 4
5 6 7 8
9 10
1
3
4
56
78
9
210
Comprehensive application
knowledge from one Partner
For every aspect of architectural exte-riors - from fixings to special hinges for doors and windows – SFS intec understands your business. We help make our global customer base more competitive.
Experienced sector specialists tuned to the regional requirements of each individual market guarantee genuinelocal advice and support.
Partners who really understand you:
Experts for architectural exteriors.
Why not take advantage of our
expertise:
� More than 50 years experience��Technical application profession- als available for on-site support��Know-how database from research, development, manufac- turing and application engineering
4.2 08/2011
Services Roofing and Cladding
4
The secure route to the right fastener solution:
Simple, efficient planning aids at every step of the project.
Talking to the specialists in fastener
and fixing technology
Whatever phase your project is at, SFS intec offers you the right planning aids to determine the appropriate fastener and the matching accessories.
That might be a specific application notmentioned in our catalogue. Whether it‘s a new build or renovation, our experts are here to offer fast, efficient help in choosing the right system for you; with no complications. Solutions are always matched to the specificrequirements of the individual project,providing you with longevity, functionali-ty, long-term security and real aesthetic appeal.
Choose the planning aids you
need:
� User-friendly catalogues��On-site or office advice��Application technicians available by phone��Product selector and project management aids at www.sfsintec.biz
��Twenty-four hour online e-shop ordering
4.308/2011
Services Roofing and Cladding
4
Tried and trusted technologies mat-
ched to your specific requirements
Somewhere in the world we will have already addressed the same tasks confronting you right now.
Our global team of experts is conti-nuously working on new challenges which means our customers benefit from a massive pool of accumulated knowledge. So they are always one step ahead.
With your specific requirements in our hands, we exchange know-how among a vast international network of industry specialists, seeking out the right fastener solutions for you. Solutions to make your work easier and to help your business be more competitive.
The services that can improve
your competitive edge:
��Local site support on projects outside your home market� Years of experience on numerous international projects��In-depth knowledge gained from our work with the world’s leading OEM’s��People on site who speak your language, offering an international approach
Always one step ahead:
An international network with local knowledge in every field.
4.4 08/2011
Services Roofing and Cladding
4
Services Flat Roof
Economy and security built in:
Complete systems covering every application.
More than just fastener systems
We work hand-in-hand with planners and specifiers everyday on sites around the world. This is the driver behind our constantly evolving products and ser-vices. The diverse messages coming in from the market place are converted by our design and development specia-lists into profitable solutions for our customers.
SFS intec offers more than just fasteners to its customers. We provide intelligent drive systems and coatings that optimise the insertion torque. Design details that ensure every solu-tion is perfectly fit for purpose. We also offer those essential complementary products like rivets, pipe flashings, sealing tapes and anchorages – all fulfilling the most demanding require-ments.
SFS intec complete systems:
��Multi-functional fasteners ��Guaranteed long-life ��Simple and easy to use ��Intelligent installation tools enabling fast, efficient work��System accessories including rivets, pipe flashings, sealing tapes and anchorages
4.508/2011
Services Roofing and Cladding
4
Assured quality – fast delivery
We never compromise when it comes to our application-optimised fasteners. Our trained specialists throughout the value-added chain are there to ensure quality in every aspect of our products and services.
Every SFS intec site has its own accreditation to ISO 9001 quality management standard. Moreover, a complete network of manufacturing and logistics support centres means maximum product availability.
SFS intec business partners
profit from:
��Certified quality from our own production plants��Fast, efficient product availability from an international manufactu- ring and logistics network��Flexible responses to individual needs that only the original manufacturer can truly provide
Quality you can depend on:
A network of quality-certified plants.
4.6 08/2011
Services Roofing and Cladding
4
Services Flat Roof
Reliable performance:
Tested in-house, confirmed on site.
Future-focused fastener systems
Are the fasteners up to the anticipatedstatic and dynamic loads? Is the fastener seal secure for life? Will wind forces be safely transmitted to the sub-structure? Such questions con-front SFS intec experts day by day.
New solutions are extensively tested in our own in-house laboratories to see how they will perform in practice. One key aspect lies in meeting the require-ments of a diverse range of approvalauthorities. Working hand-in-glove with leading manufacturers of roofing systems, structural components and insulation systems, whilst carrying out our own primary research, we at SFS intec have spearheaded numer-ous trends in modern fastener deve-lopment.
SFS intec fastening systems are
checked for:
��Long-term behaviour under static and dynamic loading��Corrosion resistance��Ease-of-use and perfect functioning on site��Fulfilment of approval authority requirements��Continuous production controls
4.708/2011
Services Roofing and Cladding
4
Absolute fastener security
Increased safety requirements; econo-mic, ergonomic and aesthetic conside-rations; meeting the relevant direc-tives and building control guidelines: these and other factors are becoming increasingly important in industrial construction.
That’s why choosing the right fastening system for each specific application is vital. We ensure specifiers, architects and installers have the advice and information needed to choose an appropriate system from the wide range of alternatives available.
Your support team is only a phone call away. Our comprehensive website www.sfsintec.biz provides a wealth of information on optimum fastener technology. Draw on our years of experience in every aspect of faste-ning and fixing to put you in the driving seat when it comes to industrial building.
Services ensuring a secure build:
��Choosing the appropriate faste- ning system at the planning stage��Comprehensive analysis of your needs including on-site tests��Optimum supply chain manage- ment from plant to site��On-site personnel training
The right fastening system every time:
Technical advice and support anytime, anywhere.
4.8 08/2011
Services Roofing and Cladding
4
Business Solutions Flat Roof
Fast, reliable service wherever you
need it
The efficient and timely handling of construction projects is becoming increasingly important as assignments grow in complexity. Efficient supply chain management is therefore gaining in significance.
SFS intec has demonstrated its capabilities in this field in numerous trailblazing projects. Our international presence guarantees the high availabi-lity of market-specific products as well as rapid, reliable service worldwide. You also benefit from simple, efficient ordering, management and delivery processes through tailor-made Busi-ness Solutions in the field of supply chain management. You will find more information about this on pages 13.A to 13.D.
We improve your value chain
with:
��An international presence��High availability of market-specific products��Global delivery��Speed and reliability��Individually tailored Business Solutions
High standard of delivery reliability due to local presence:
Global supply chain management.
4.908/2011
Services Roofing and Cladding
4
Focused market activities for a wide range of industries:
Generating customer benefits as a joint corporate objective.
4.10 08/2011
Services Roofing and Cladding
Development and production partner for precision engineered components and special fasteners for suppliers to the automotive industry operating worldwide.
Development and manufacturing partner for special fasteners and precision engineered components for a range of industrial business sectors.
Mechanical fastening systems and fixing technologies with system accessories for light industrial builds, bolt-on rear ventilated facades, flat roofing and timber engineering..
Mechanical fastening systems for doors and windows; as well as system solutions for glass facades.
FasteningSystems
Hinge technology for doors and windows.
AutomotiveProducts
IndustrialProducts