FABRICATORS • ERECTORS • BRIDGE CONSTRUCTORS

FABRICATORS • ERECTORS • BRIDGE CONSTRUCTORSBOLTING • SAFETY • ANCHORS • TOOLS • ANCHOR BOLTS

VISIT OUR WEBSITE GONEFCO.COMPROVIDING PRODUCTS

TO MEET:• BUY AMERICA • BUY AMERICAN• AIS

2 STRUCTURAL BOLTINGTENSION CONTROL BOLTS

• Designed for use with tension control, or twist off type bolts

• One sided, one man installation• Lightweight, electric operation• Quiet, non-impacting operation• No tool or air compressor calibration

RENT MERENT ME

TC Bolt Installation Tool

Part No. DescriptionS61EZ 5/8" - 7/8" dia. TC BoltsGS91EZ 1", 3/4 & 7/8" dia. TC BoltsGS111EZ Up to 1-1/8" dia. TC Bolts

Keep it together with a NEFCO bucket

Index

Structural Bolting 2 - 5

Safety 6 - 7

Anchors 8 - 9

Threaded Rod & Studs & Anchor Bolts 10

Wire Rope & Hardware 11

Power Tools 12

Grinders & Abrasives 12

Magnetic Drills 13

Hand Tools 13

Lindapter 14

Weld Studs 14

Strut Channel & Fittings 15

Custom Fabrication 15

• 593 ft.lbs. of max torque• Bolt tip ejecting lever located

by power trigger• No-lock on trigger switch

Shear Wrench

Part No. Size6922NB 3/4" 7/8"

• Computerized inspection and documentation• Blueprint and specification interpretation• Lot traceability• Manufacturer's test reports and certification• Chemical and physical test reports

Inner-Outer Sockets included

» Cold Formed Specials » Screw Machining » Secondary Operations » Shoulder Screws » Precision Pins & Dowels

» Socket Heads » Nuts and Washers » Set Screws » Retaining Rings » Rivets

QUALITY ASSURANCENEFCO offers total quality assurance with full traceability, inspection, and testing in house

» Certified ISO 9001:2015 (East Hartford)

» Computerized Inspection and Documentation» Blueprint and Specification Interpretation» Lot Traceability» Manufacturer’s Test Reports and Certification» First Article Inspection» Chemical and Physical Test Reports» Full PPAP Reports» DFARS & ROHS Compliant

Fasteners to Print or Custom Developed Specials

CUSTOM ENGINEERED FASTENERSSupport & Services:

» Application Engineering and Design

» Prototypes and/or Samples

» Recommendations and Custom Part Drawings

» Technical Assistance

» Domestic and Global Sourcing

Core Products:

Quality Assurance

3STRUCTURAL BOLTINGTENSION CONTROL BOLTS

Tru-Tension® Fasteners are designed to be installed with various types of lightweight portable electric wrenches specifically intended for use with this style of structural fasteners. They can be utilized for any applications where A325 or A490 – Type I or Type III (weathering steel) hex bolts are specified. The installation tool has an inner socket which engages the spline tip of the bolt, while the outer socket engages the nut. The outer socket rotates the nut relative to the bolt spline, and when the tension is sufficient in the fastener, the spline tip simply twists-off, leaving the tightened bolt correctly installed in the connection.

A325 /A490 TC (Tension Control) Bolts

• TC Bolts know when the specified tension has been reached; the special tip shears

• No operator or tool can accidentally over tension - It’s a calibrated bolt

• Visual inspection: when the tip is gone, tension is correct

• TC Bolts are installed faster with less operator fatigue

• Noiseless, one man installation• Provides absolute traceability and

worldclass quality

Nominal Bolt Size (in.)

Minimum Tension1 in 1000s of pounds (kips)

ASTM F1852 (A325) ASTM F2280 (A490)5/8 20.0 25.2

3/4 29.4 36.8

7/8 41.0 51.5

1 53.6 67.2

1-1/8 58.8 84.0

How the Tru-Tension® System Works

Grip Length is defined as the total thickness of all connected material, exclusive of washers. Each ASTM F436 washer used is 5/32 in. thick, use 5/16 in. for each beveled washer used.

Fastener tension test requirements for slip-critical connections and connections subject to direct tension.

Structural Fastener Tension

1 Equal to 70 percent of specified minimum tensile strengths of bolts (as specified in ASTM Specifications for test of full size A325 and A490 bolts with UNC threads loaded in axial tension). May be rounded to nearest 1000 lbs. (chart includes additional 5% per AISC spec.)

Bolt Dia. (in.)

To determine bolt length, add noted amount to the steel to steel grip and round

up to the next std bolt length. (in.)5/8 7/8

3/4 1

7/8 1-1/8

1 1-1/4

1-1/8 1-1/2

Determination of Tru-Tension® Length

4 STRUCTURAL BOLTINGHEX HEAD

• Heavy Hex Bolts with a washer-face on the underside of the head primarily used in Structural Steel joints

• Available in Black (Plain), Hot Dip and Mechanical Galvanized finishes

• Available in Type I & Type III (Weathering Steel)• A325-T full-thread in Type I only• Type I available in ½" through 1¼" diameters• Type III available in ¾" through 1" diameters• Specify Finish & Type (I or III) when ordering

• Plain • Hot Dipped Galvanized (ASTM A153 F2329) • Mechanical Galvanized (ASTM B695) • Type III (Weathering Steel) Available

A325-3 A490-3

Diameter

½" - 13 5⁄8" - 11 ¾" - 10 7⁄8" - 9 1" - 8 11⁄8" - 7 1¼" - 7

Length (inch)

1¼ — — — — — —1½ 1½ 1½ — — — —1¾ 1¾ 1¾ 1¾ — — —2 2 2 2 2 — —

2¼ 2¼ 2¼ 2¼ 2¼ 2¼ 2¼2½ 2½ 2½ 2½ 2½ 2½ 2½2¾ 2¾ 2¾ 2¾ 2¾ 2¾ 2¾3 3 3 3 3 3 3

3¼ 3¼ 3¼ 3¼ 3¼ 3¼ 3¼3½ 3½ 3½ 3½ 3½ 3½ 3½3¾ 3¾ 3¾ 3¾ 3¾ 3¾ 3¾4 4 4 4 4 4 4— 4½ 4½ 4½ 4½ 4½ 4½— 5 5 5 5 5 5— 5½ 5½ 5½ 5½ 5½ 5½— — 6 6 6 6 6

A325 /A490 Structural Bolts

ASTM DESIG.

BOLT TYPE

BOLT FINISH ASTM A563 NUT GRADE AND FINISHASTM F436 WASHER

TYPE AND FINISH

A3251

Plain (uncoated) C, C3, D, DH, and DH3; plain 1; plainGalvanized DH ; galvanized and lubricated 1; galvanized

Zn/AI Inorganic, per ASTM F1136 Grade 3

DH; Zn/AI Inorganic, per ASTM F1136 Grade 5 1; Zn/AI Inorganic, per ASTM F1136 Grade 3

3 Plain C3 and DH3; plain 3; plain

F18521

Plain (uncoated) C, C3, DH and DH3; plain 1; plain

Mechanically Galvanized DH; mechanically galvanized and lubricated 1; mechanically galvanized

3 Plain C3 and DH3; plain 3; plain

A4901

Plain DH and DH3; plain 1; plainZn/AI Inorganic, per ASTM

F1136 Grade 3DH ; Zn/AI Inorganic, per ASTM F1136 Grade 5 1; Zn/AI Inorganic, per ASTM F1136 Grade 3

3 Plain DH3; plain 3; plain

F22801 Plain DH and DH3; plain 1; plain3 Plain DH3; plain 3; plain

Acceptable ASTM A563 Nut Grade and Finish and ASTM F436 Washer Type and Finish

ASTM A563 ASTM A563 ASTM A194 ASTM A563 ASTM A563

Grade C Grade DH Grade 2H Grade C3 Grade DH3

Nut Identification and Grade Markings

5STRUCTURAL BOLTINGHEX HEAD

Finishes: Plain • Hot Dip Galvanized • Mechanical Galvanized

SIZ

ES

1/2" 7⁄8" 1-1/4"

5⁄8" 1"

3/4" 1-1⁄8"

Flat Washers ASTM A325 / F436

CALL FORMORE SIZES

Keep it together with a NEFCO bucket

Rotational Capacity Test Report

Date 8/31/2018Sales Ticket Number S2988524Lot Number BOLT: 398383A WASHER: D5881 NUT: 406805BPart NumberDescription 7/8-9 X 4-1/4 A325 HDG

Operator Test Method Material Bolt Diameter Bolt LengthWES FHWA ASTM A325 7/8 4.25

Calibration InformationTest Equipment Serial Number Calibration DateTension Sensor HT-138 (S/N V110333) 1/27/2017Torque Sensor HT-138 (S/N 201235) 1/27/2017

Rotational Capacity Test Results Criteria Sample 1 Sample 2 Sample 3 Sample 4 Sample 5Pre-tension (lbs.) 4000 4001 4008 N/A N/A N/AMinimun Installation Tension (lbs.) 39000 39083 39126 N/A N/A N/AMaximum Allowable Torque (ft-lbs) 0 335 247 N/A N/A N/ADegrees of Rotation 360 361 361 N/A N/A N/AMinimum Tension at Full Rotation (lbs.) 45000 58129 64898 N/A N/A N/A

Rotational Capacity Test Results - continued

Criteria Sample 1 Sample 2 Sample 3 Sample 4 Sample 5

Thread Visual PASS/FAIL PASS PASS N/A N/A N/ATest Result PASS/FAIL PASS PASS N/A N/A N/A

• Flexible silicone is embedded in the depressions under the bumps

• Tighten bolt until calibrated amount of orange silicone appears

Squirter® DTI's

How Much Squirt is Tight?

Direct Tension

IndicatorsGREEN MEANS GO!

BOLT DIA. THREAD LENGTH1/2" 1.005/8" 1.253/4" 1.387/8" 1.501" 1.75

1-1/8" 2.001-1/4" 2.001-3/8" 2.251-1/2" 2.25

Structural Bolt Dimensions

Finishes: Plain • Hot Dip Galvanized

Beveled Square Washers ASTM A325 / F436

SIZ

ES

1/2" 7⁄8"

5⁄8" 1"

3/4"

Load Indicators

ViewTite™

NUT SIDE SELF-INDICATOR

6

4501C

SAFETY

Hard Hats & Face Shields

Clothing Hearing & Eye Protection

Hand Protection

PRODUCTS INCLUDED ARE ONLY THE MOST COMMON SAFETY PRODUCTS REQUESTED BY OUR CUSTOMERS. NEFCO STOCKS COMPLETE LINES OF SAFETY EQUIPMENT. PLEASE CALL FOR PRODUCTS NOT LISTED.

Personal Protection Ladders

FS1506FE3200

475360

15190

15182

68-105

SB001

311-1252

85-1105IOD302-0500-YEL

1517815181

1965-10

1514BL

RWG559

Perimeter Protection

GNEP(SIZE)5-T8

90754C90563C 90673C

First Aid Kits

FXP1708

7SAFETY

PRODUCTS INCLUDED ARE ONLY THE MOST COMMON SAFETY PRODUCTS REQUESTED BY OUR CUSTOMERS. NEFCO STOCKS COMPLETE LINES OF SAFETY EQUIPMENT. PLEASE CALL FOR PRODUCTS NOT LISTED.

Fall Protection Kits Harnesses

Self-Retracting Lifelines

Lifeline Kits

Tethers

Fall Protection

3500225

1161207

SG-56150-ORG-FR

FS806-100 (100 ft. lifeline)

FS806-60 (60 ft. lifeline)

3590543 3190R310020

19767

10600

Netting

Anchorage Devices

4650-3

599100

8 ANCHORS CHEMICAL / EPOXY

SIMPLE CERTAINTY In the selection and installation of adhesive anchors

Anchor Specification, Simplified.

Anchor Installation, Certainty.

Red Head reduces complexity by covering all your anchoring needs with fewer products. Backed by ICC-ES evaluation reports, this versatile offering simplifies specification workand provides added assurance that chemical anchors will perform to design expectations.

Selecting the wrong adhesive for the job is a key concern and common cause of anchor failure on the job site. The simplicity and versatility of Red Head’s adhesive line minimizes the risk of picking the wrong adhesive for the anchoring application and job site conditions at hand.

SIMPLIFIED CHOICES MINIMIZE THE RISK OF INSTALLATION ERROR

Red Head products are engineered to provide the most versatility whenit comes to providing superior bond strength across many material types and installation conditions, while meeting a wide array of code requirements.

RED HEAD ADHESIVE ANCHORING SYSTEMS ARE DESIGNED FOR:

Reliable Performance

Broad Application Coverage Jobsite Productivity

Red Head adhesives were formulated to go above-and-beyond industry standards.

The performance of all of our adhesives is backed by ICC-

ES evaluation reports and 55+ state DOT listings.

Whether its light-duty or heavy-duty, concrete or

masonry, deep embedment holes or core-drilled holes, wet conditions or extreme

temperatures, Red Head hasan adhesive anchor solution.

Red Head knows that time = money, and our adhesives are here to help save some of both.

No need to reschedule labor when the rain arrives, keep installing Red Head adhesives! The versatility of the Red Head product line

means fewer products to train a crew on and fewer products to purchase and stock.

HY 200-A, HY 200-RHY 100, HY 70

HIT-ICEHY-10 PLUS

AC200+™

AC100+GOLD®

AC50™

AT-XP® AT

RE 500 V3 Pure110+® SET-XP®

RE 100HTE 50

Pure50+™

PE1000+®

PURE GP

SET®

ET-HP®

EDOT

THE MOST VERSATILEQUICK-CURE

FOR THE MOST DEMANDING JOBS EVERYDAY EPOXY

9ANCHORS MECHANICAL / EPOXY

* Hilti is a registered trademark of Hilti Corporation

CROSS REFERENCE CHART

Product Category DeWalt Product Hilti* Product NameHigh Performance Structural Concrete Anchors

Epoxy Adhesive Anchor Pure110+® RE 500 V3

Hybrid Adhesive System AC200+™ HY 200

Wedge Anchor Power-Stud®+ SD2 KB-TZ

Screw Anchor Screw-Bolt+™ KH-EZ

Structural Concrete Anchors - Value Solutions

Epoxy Adhesive Anchor Pure50+™ RE 500

Hybrid Adhesive System AC100+ Gold® HY 100

Wedge Anchor Power-Stud®+ SD1 KB3

Masonry Anchors (CMU)

Hybrid Adhesive System AC100+ Gold® HY-70

Wedge Anchor Power-Stud®+ SD1 KB3

Screw Anchor Screw-Bolt+™ KH-EZ

Outdoor Anchors (Exterior)

Epoxy Adhesive with Stainless Rods Pure110+® RE 500 V3

Hybrid Adhesive System with Stainless Rods AC200+™ HY 200

Stainless Wedge Anchor Power-Stud®+ SD4/SD6 KB-TZ Stainless

Stainless Screw Anchor Wedge-Bolt Stainless No Equivalent

Specialized Heavy Duty Structural Anchors

Heavy Duty Sleeve Anchor Power-Bolt®+ HSL-3

Undercut Anchor Atomic+ Undercut® HDA

Direct Fastening System

Powder Actuated Fasteners CSI Pins X-U Pins

Gas Actuated Fasteners Trak-It® C5 Pins Powder-Actuated Pins

Hanger Type Anchors

Cast-in-Place Wood Framework Wood-Knocker® II+ KCS-WF

Cast-in-Place Metal Deck Bang-It®+ KCS-MD

Cast-in-Place Metal Deck with Spanner DDI+™ No Equivalent

PT Slabs / Hollow Core Plank Anchor Mini-Undercut+™ No Equivalent

Screw Type Hanger Anchor Hangermate®+ KH-EZ I

10

• Low carbon A36• ASTM F1554 Grade 55/105• ASTM A449• Stainless Steel 304/316• ASTM A193 B7, B8, B8M

THREADED RODS & STUDS & ANCHOR BOLTS

THREADED RODALL FINISHES:• Plain• Galvanized • Zinc Plated

STOCK MATERIAL:• Carbon Steel• ASTM A449• Hardened Steel • Stainless Steel (304/316)• B7 - ASTM A193• Coil Thread (ASTM A108)

6 • 10 • 12 ft. LengthsIN-HOUSE SERVICESRod Cutting - Anchor Bolts

STUD MANUFACTURING

Anchor Bolts• Order nuts and

washers separately• Special sizes available • Specify dimensions -

material & finish required

Anchor Bolt Sleeves• Provides a grout pocket

around anchor bolts to allow you to position anchor bolts exactly where you want them

• Grout pockets keep free of water and dirt

• Bolt cuts its own thread in top of polyethylene sleeve

• Non-corrosion / non-conductive

• No custom pre-fitting required, no welding, forming, pipe cutting or packing

Fully Threaded Studs

Welded to Plates Anchor Plates

Chisel Point 45° Point

Sag/Tie Rods

Swaged Anchor Bolts Eye Nuts

Clevises & Clevis Pins

Turnbuckles & Assemblies

• Low carbon A36• ASTM F1554 Grade 55/105• ASTM A449• Stainless Steel 304/316• ASTM A193 B7, B8, B8M

Coil Threaded Rod

11WIRE ROPE & HARDWARE

Wire Rope / Perimeter Cable 3/8" x 2500' per spool / 1/2" x 1000' per spool

Perimeter FlagsClips malleable & forged

Wire Rope

How to Order Wire RopeGive complete information on your order to

prevent errors and avoid delays

Item Example Length of rope required 150-ft

Diameter (maximum measure) 5/8”

Construction 6 x 19

Core type IWRC

Type of material Improved plow steel

Direction of type and lay Right lang lay

Type of equipment Shovel hoist rope

6 x 7 - Regular LayThis is a stiff rope, highly resistant to abrasive wear. It is a standard recommendation for guys, stays, and rigging.

6 x 19(6 x 25 Filler Wire)This is the true work horse rope of the construction equipment field. It combines good flexibility and strength with high resistance to crushing and abrasion.

Malleable & Forged Wire Rope Clips Galvanized

HOT DIPPED GALVANIZED IN STOCKSTAINLESS STEEL ALSO AVAILABLE

Standard Duty Wire Rope Thimble Zinc Plated

Heavy Duty Wire Rope Thimble Galvanized

Sleeves and Stops Aluminum and Copper

12 POWER TOOLS

GRINDERS & ABRASIVES

Chop SawsRotary Hammers

Corded & Cordless SDS+, SDS-MAX, Spline

Impact Wrenches

Corded & Cordless 1/4"-7/8"

Cutting, Grinding, & Chop Saw Wheels

13MAGNETIC DRILLS

Tool Series: RotaCut™ Extended Reach Holcutter™ Carbide Holcutter™ RotaLoc™ RotaLoc Plus™ Rotabroach® Copperhead™ 42/43,000

Diameter RangeMin. / Max.

¼" to 1 ½" 3⁄8" to 9⁄16" 11⁄16" to 3" 11⁄16" to 3"½" to 1 1⁄16"

w/ stack geometry

½" to 1 3⁄8" 7⁄16" to 2 3⁄8" 9⁄16" to 1 ½" ¾" to 3 1⁄16"

Max. Depth of Cut ¼" to ½" 1⁄4" 1⁄8" 1⁄8" ¾" 1" 1", 2", or 3" 2" 2" or 3"

Mounting3⁄8" or ½"

Triple Flat Shank3⁄8" Triple Flat Shank

3⁄8" Triple Flat Shank

3⁄8" or ½"Triple Flat Shank

Bayonet Style Bayonet Style¾" Double Flat Shank

¾" Double Flat Shank

¾" Weldon or1 ¼" Weldon

HOUGEN CUTTER COMPARISON CHARTCutters by Champion, Dewalt, & Milwaukee also available - Call for details

A. Leather-Bottom Bucket B. ReamersC. Black Oxide Adjustable Spud Wrench (1-1/2")D. Black Oxide Open End Spud Wrench (offset head)E. 1/2" Drive Ratcheting Construction Wrench

A. B.

C. D. E.

F. G.

H. I.

J.

HAND TOOLS

F. Broad-Head Bull PinsG. Barrel Type Drift PinsH. Tool LanyardsI. 1/2"-1-1/4" Drive Deep Impact Sockets - 6ptJ. Hougen 12,000 Series Cutter Kits

14

WELD STUDS

The strongest expansion bolt with full ICC-ES seismic approval30% higher tensile capacity due to High Clamping Force design23% higher shear resistance due to high quality materials(ICC-ES data, 3.4" Hollo-Bolt vs. other products evaluated to AC437

• For HSS and structural steel sections• Fast, cost saving installation from one side• Highest resistance to shear and tensile loads• Unique high clamping force design• Hot Dip Galvanized corrosion protection• All sizes approved for SDC A through F

by

a) Hexagonal b) Countersunk c) Flush Fit

High Clamping Force mechanism (sizes 5/8" and 3/4")

a) Hexagonal b) Countersunk Collar Safe Working Loads (FOS 5:1)

Product Code

Bolt B

Product Code

Bolt B

Clamping Thickness W

Outer Ply min t

Sleeve Length L

Height H

Ø D

A/FTightening

TorqueTensile

lbs.Single

Shear lbs.LHBMO8#1 5/16" x 2" LHBCSKMO8#1 5/16" x 2" 1/8" - 7/8" - 1-3/16" 3/16" 7/8" 3/4" 17 899 1124LHBMO8#2 5/16" x 2-3/4" LHBCSKMO8#2 5/16" x 2-3/4" 7/8" x 1-5 /8" - 1-15/16" 3/16" 7/8" 3/4" 17 899 1124LHBMO8#3 5/16" x 3-9/16" LHBCSKMO8#3 5/16" x 3-9/16" 1-5/8" - 2-3/8" - 2-11/16" 3/16" 7/8" 3/4" 17 899 1124LHBM10#1 3/8" x 2-3/16" LHBCSKM10#1 3/8" x 2" 1/8" - 1" - 1-3/16" 1/4" 1-1/8" 15/16" 33 1910 2248LHBM10#2 3/8" x 2-3/4" LHBCSKM10#2 3/8" x 2-3/4" 1" - 1-13/16" - 1-7/8" 1/4" 1-1/8" 15/16" 33 1910 2248LHBM10#3 3/8" x 3-9/16" LHBCSKM10#3 3/8" x 3-9/16" 1-13/16" - 2-3/4" - 2-5/8" 1/4" 1-1/8" 15/16" 33 1910 2248LHBM12#1 1/2" x 2-3/8" LHBCSKM12#1 1/2" x 2-3/16" 1/8" - 1" - 1-3/8" 1/4" 1-1/4" 1-3/16" 59 2360 3372LHBM12#2 1/2" x 3-5/32" LHBCSKM12#2 1/2" x 3-1/8" 1" - 1-13/16" - 2-1/4" 1/4" 1-1/4" 1-3/16" 59 2360 3372LHBM12#3 1/2" x 4" LHBCSKM12#3 1/2" x 4" 1-13/16" - 2-3/4" - 3-1/8" 1/4" 1-1/4" 1-3/16" 59 2360 3372

Hollo-Bolt HCFLHBM16#1 5/8" x 3" LHBCSKM16#1 5/8" x 2-3/4" 1/2" - 1-1/8" 5/16" 1-5/8" 5/16" 1-1/2" 1-7/16" 140 4720 6744LHBM16#2 5/8" x 4" LHBCSKM16#2 5/8" x 4" 1-1/8" - 2" 5/16" 2-1/2" 5/16" 1-1/2" 1-7/16" 140 4720 6744LHBM16#3 5/8" x 4-3/4" LHBCSKM16#3 5/8" x 4-3/4" 2" - 2-13/16" 5/16" 3-5/16" 5/16" 1-1/2" 1-7/16" 140 4720 6744LHBM20#1 3/4" x 3-9/16" - - 1/2" - 1-5/16" 5/16" 1-15/16" 3/8" 2" 1-13/16" 221 7868 8992LHBM20#2 3/4" x 4-3/4" - - 1-5/16" - 2-3/8" 5/16" 3" 3/8" 2" 1-13/16" 221 7868 8992LHBM20#3 3/4" x 5-7/8" - - 2-3/8" - 3-3/8" 5/16" 4" 3/8" 2" 1-13/16" 221 7868 8992

D L #1

Dia. Min. Length Before Weld

1/2 1-1/8

1/2 1-1/2

1/2 1-5/8

1/2 2-1/8

1/2 2-5/8

D L #1


1/2 3-1/8

1/2 4-1/8

1/2 5-5/16

1/2 6-1/8

1/2 8-1/8

D L #1


3/4 3-3/16

3/4 3-11/16

3/4 4-3/16

3/4 4-11/16

3/4 5-3/16

D L #1


3/4 6-3/16

3/4 7-3/16

3/4 8-3/16

3/4 9-3/16

3/4 10-3/16

15

1"3 2

4 1"8

7"1 16

STRUT CHANNEL & FITTINGSPF 100 1-5/8" x 3-1/4" x 12 ga.

PF100 PF100 2T3

Welded Configurations

PF 150 1-5/8" x 2-7/16" x 12 ga.

PF150 PF150 2T3


3 ¼"DEEP

2 7/16"DEEP

PF 200 1-5/8" x 1-5/8" x 12 ga.

PF200 PF200 2T3

1 5/8"DEEP

12GAUGE

PF 500 1-5/8" x 13/16" x 14 ga.

PF500 PF500 2T3

13/16"DEEP

14GAUGE

12GAUGE

12GAUGE

2-Hole 90° Corner Angles

PF 603

4-Hole 90° Corner Angles

PF 607

4-Hole T-Plate

PF 714

Square Washer

PF 619¼" , 5⁄16", 3⁄8", ½", 5⁄8", ¾", 7⁄8" Bolt Sizes

U-Washer

PF 2883⁄8", ½", 5⁄8" Bolt Sizes

Steel Brackets

Channel Nuts

2"

1 7"8

21"3

5 83"

5"81

Bolt Size "A"

5"81

A



• Take offs• Detailed submittals• Stamped engineering• P.E. drawings and details

CUSTOM FABRICATION

Seismic Bracing / Vibration Isolation Equipment

Strut FabricationStrut • Precut to Size • Pre-Assembled Trapeze Hangers

Materials Pre-Galvanized Steel • Hot Dip Galvanized Steel • Aluminum

Stainless Steel • Welding • Cutting • Assembly • Punching • Painting

Engineering Services• Designed per plans & specifications • Detailed submittals• Supports located on drawings• P.E. stamped drawings & calculations (as required)

Engineered Pipe Hanger Support Systems – Turnkey Hanger Systems• Engineer and design per plans and specifications • Fabricate and supply • Detailed submittals• Field walk-through & verification • P.E. stamped documents and drawings• Supports located on drawings • Pipe stress analysis (if required)

13

126

54

9

11

3

10

12

78

SHARP® is NEFCO’s acronym for five categories of crucial construction products: Strut, Hardware, Anchoring, Rod and Pipe Hangers.

Unrivaled inventory expertise and product selection across these five categories make NEFCO a leader in the construction supplies business. BB025 REV21

1 HARTFORD 800-969-0285 - 411 Burnham St., E. Hartford, CT 06108

2 BOSTON 800-645-6155 - 530 Turnpike St., Canton, MA 02021

3 WASHINGTON, D.C. 877-419-2755 - 1101 Hampton Park Blvd., Ste. 300, Capitol Heights, MD 20743

4 PHILADELPHIA 855-567-7888 - 415 Boot Rd., Downingtown, PA 19335

5 NEW YORK CITY 844-633-2669 - 1715 Washington Ave., Bronx, NY 10457

6 ALBANY 844-633-2625 - 45 Railroad Ave., Colonie, NY 12205

7 ROANOKE 800-868-9746 - 3304 Salem Turnpike NW, Roanoke, VA 24017

8 HARRISONBURG 540-432-9622 - 688 Cottontail Trail, Mt. Crawford, VA 22841

9 GREENSBORO 336-272-9954 - 322-A Edwardia Dr., Greensboro, NC 27409

10 CHARLOTTE 800-288-9200 - 3316 South Blvd., Charlotte, NC 28209

11 POMPANO BEACH 954-532-6098 - 290 S.W. 14th Ave., Pompano Beach, FL 33069

12 ORLANDO 800-969-0285 - 8123 S. Orange Ave., Ste. 158, Orlando, FL 32809

13 SYRACUSE 800-969-0285 - 4629 Crossroads Park Drive, Liverpool, NY 13088

Documents

FABRICATORS • ERECTORS • BRIDGE CONSTRUCTORS