www.sjerhombus.com Toll Free 1-888-342-5753 Phone 218-847-1317

• Digital display for programming pump control and system monitoring

• Flashing red alarm beacon on cover

• External indicators for control power, alarm power, and pump run

• External test/silence switch for easy operation

• Optional mounting post with removable access door for easy wiring. Post can be mounted directly into ground, over 4x4 or conduit

• Duplex model available

EZ Series® simplex panelEasy Installation and Operation

Single Phase Simplex Control Panel

www.sjerhombus.com Toll Free 1-888-342-5753 Phone 218-847-1317 ©2014 SJE-Rhombus Rev 11/14

EZ Series® SimplexSingle Phase Simplex Control Panel

Function

The EZ Series® Single Phase Simplex panel is designed to control one 120/208/240V single phase pump in water and sewage installations. It features a digital display on the inside of the front cover for programming pump control and system monitoring, including: float status, elapsed time pump run, cycle counter, alarm counts (high water/power fail), float error count, auxiliary alarm counter, timer override count (TD only), on/off time (TD only). This innovative control panel is easily converted to demand or timed dose in the field.

Options

• DUO alarms for local code compliance• Optional mounting post with removable access door• Duplex model available

Part Number Model Number

• 1030111 EZS21W114H3A6A8AC10E15A17G

Components

1. NEMA 4X enclosure rated for outdoor use

2. Locking latch for added safety3. Digital display4. Pump Run button5. Menu/Enter & Set/Change

buttons for programming and viewing control panel

6. Two circuit breakers: one for pump power; another for control and alarm power

7. Pump run relay (30 amp) controls pump by switching electrical lines

8. Auxiliary alarm contacts9. Large terminal strip for easy

wiring

3 64 1

8 79 2

5