Upload
lynguyet
View
216
Download
2
Embed Size (px)
Citation preview
External Report Created On
Airbus SAS, 2015. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of Airbus SAS. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of Airbus SAS. This document and its content shall not be used for any purpose other than that for which it is supplied.
04 Dec 2017 11:06
1/712
External Shop Process Family Process Specification(PS) / Process Instruction (PI) Couple qualification Status Only for NDT EQUIPMENT SIZES
ARP-ID Company Name Street City ZIP-Code Country Specialist Family Sub Family Process Ref. No. (PS) Title (PS) PS Current Version Ref. No. (PI) Title (PI) PI Current Version Special Process Status Expiry Date Date of last statusupdate
Limitations QCS Ref. Number QCS Title QCSMaterial/shape/thickn
ess scope
Max Width (cm): Max Length (cm): Max Height (cm): First ATP orQualification date
133527 A2C AIR COSTCONTROL
RUE DUCOMMANDANT
COUSTEAU
LISLE JOURDAIN 32600 France N/A 07 Electrical 06 Identification ofconnectors
Laser wire and cablemarking by Ultra
Violet UV process
AIPS07-06-001 Laser wire and cablemarking by Ultra
Violet UV process
4 AIPI07-06-001 Lser wire and cablemarking by ultra
violet UV process
A1 Yes QUALIFIED 02/08/2017 09:43:32 02/08/2017 09:39:43
133840 SABENA TECHNICSPAINTING
AEROPORTPLEURTUIT DINART
DINARD 35801 France N/A 05 Paints, Coatings,Filler, Sealant
01 Primer Application of basicprimer
ADET0071 Painting of detailmetallic parts
J IPDA64-02 MANUAL PAINTINGOF METAL DETAIL
PARTS
A4 Yes QUALIFIED 04/09/2017 15:30:43 26/07/2016 16:38:15
133840 SABENA TECHNICSPAINTING
AEROPORTPLEURTUIT DINART
DINARD 35801 France N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Application ofexternal paint
systems
80-T-35-9127 Aircraft Exterior PaintSystem Application
80-T-35-9127 Aircraft Exterior PaintSystem Application
Yes QUALIFIED 04/09/2017 15:14:45 11/06/2013 00:00:00
133840 SABENA TECHNICSPAINTING
AEROPORTPLEURTUIT DINART
DINARD 35801 France N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Application ofexternal paint
systems
ADET0115 Exterior paint at finalstage of aircraft
assembly
D IPDA64-03 FINAL EXTERIORPAINTING OF
AIRCRAFT
A2 Yes QUALIFIED 04/09/2017 15:27:53 26/07/2016 16:40:48
133840 SABENA TECHNICSPAINTING
AEROPORTPLEURTUIT DINART
DINARD 35801 France N/A 09 Cleaning, De-oxidation, Pickling,Chemical Coating
01 Cleaning, De-oxodation
Cleaning of AircraftWindows
80-T-39-0235 Cleaning andProtection of Cabin
Window Panes
80-T-39-0235 Cleaning andProtection of Cabin
Window Panes
Yes QUALIFIED 04/09/2017 15:19:03 21/08/2012 00:00:00
133840 SABENA TECHNICSPAINTING
AEROPORTPLEURTUIT DINART
DINARD 35801 France N/A TBD TBD Application ofAdhesive Films to the
Outer SkinDecoration Sheets
80-T-39-0950 Application ofAdhesive Films to the
Outer SkinDecoration Sheets
80-T-39-0950 Application ofAdhesive Films to the
Outer SkinDecoration Sheets
Yes QUALIFIED 04/09/2017 15:23:31 21/08/2012 00:00:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Bolt torque tightening AIPS01-02-008 Torque tightening ofscrews, bolts and
nuts
9 AIPI01-02-008 TIGHTENINGTORQUES FORSTRUCTURALFASTENERS
A3 Yes QUALIFIED 16/01/2015 00:00:00 NONE 16/01/2015 00:00:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
General assemblyand installation of
fasteners
AIPS01-02-017 General assemblyand installation of
fasteners
4 AIPI01-02-017 General assemblyand installation of
fasteners
3 Yes QUALIFIED 28/07/2014 00:00:00 NONE 28/07/2014 00:00:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Installation of BlindBolts and Blind
Rivets - Pull-type -
AIPS01-02-013 Installation of BlindBolts and Blind
Rivets - Pull-type -
5 AIPI01-02-013 Installation of BlindBolts and Blind
Rivets - Pull-type -
A3 Yes QUALIFIED 27/05/2016 15:30:21 26/02/2016 20:18:06
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Preparation of Holesin Fibre Reinforced
Plastic FRP andMixed FRPMetalAssemblies for
Fastening
AIPS01-02-005 Preparation of Holesin Plastic and Mixed
PlasticMetalAssemblies for
Fastening
11 AIPI01-02-005 Preparartion of holesin fibre reinforcedplastic FRP and
mixed FRPMETALassemblies for
fastening
A4 Yes QUALIFIED WITHLIMITATIONS
18/05/2017 10:07:43 Drilling on polyacetaland mixed
(polyacetal / Metal)assemblies
13/02/2017 16:09:27
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Preparation of holesin metallic materials
for fastening
AIPS01-02-003 Preparation of Holesin Metallic Materials
for Fastening
7 AIPI01-02-003 Preparation of holesin metallic materials
for fastening
A1 Yes QUALIFIED WITHLIMITATIONS
08/06/2017 11:00:55 Only for manual,semi-auto and
automatic drilling
28/07/2014 00:00:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 01 JoiningTechniques
04 Weldling, Brazing,Soldering
Generalrequirements for
welding and alliedprocesses
AIPS01-04-001 Generalrequirements for
welding and alliedprocesses
3 NO_AIRBUS_PI - Yes QUALIFIED 27/02/2015 00:00:00 NONE 27/02/2015 00:00:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 01 JoiningTechniques
04 Weldling, Brazing,Soldering
Resistance welding AIPS01-04-004 Resistance Welding 4 AIPI01-04-004 RESISTANCEWELDING SPOT
AND SEAMWELDING
A2 Yes QUALIFIED WITHLIMITATIONS
27/02/2015 00:00:00 ONLY ON TITANIUMPARTS, SPOT
WELDING DEGRE BAND C; RANGE
0.4:0.4 TO 3.2:3.2
27/02/2015 00:00:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 01 JoiningTechniques
04 Weldling, Brazing,Soldering
Tungsten Inert Gaswelding of metallic
materials
ADET0262 REPAIR ORREWORK OF
SHEET METALPARTS BY MANUAL
TIG WELDING
B AIPI01-04-008 TUNGSTEN INERTGAS WELDING
A1 Yes QUALIFIED 22/09/2016 14:39:01 08/01/2016 00:00:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 01 JoiningTechniques
04 Weldling, Brazing,Soldering
Tungsten Inert Gaswelding of metallic
materials
AIPS01-04-008 Tungsten Inert GasTIG Welding of
Metallic Materials
5 AIPI01-04-008 TUNGSTEN INERTGAS WELDING
A1 Yes QUALIFIED 29/07/2016 14:06:34 08/01/2016 00:00:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 03 Installation,Manufacture,Fabrication
09 Cutting of metals Laser cutting of steel,titanium and nickel
alloys
AIPS03-09-001 Laser cutting of steel,titanium and nickel
alloys
5 AIPI03-09-001 LASER CUTTINGOF STEEL,
TITANIUM, ANDNICKEL ALLOYS
2 Yes QUALIFIED WITHLIMITATIONS
only laser IPG -machine AERO CUT3000 / titanium 1,6
mm to 3 mm
03/03/2016 16:37:58
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 03 Installation,Manufacture,Fabrication
10 Straightening ofmetals
Super plastic formingof aluminium alloys
ADET0064 Aluminium alloyssuperplastic forming
C NO_AIRBUS_PI - Yes QUALIFIED WITHLIMITATIONS
30/11/2016 14:23:39 CLASSEFONCTIONNELLE2 S ET 3 + PICEF531 20072 200
27/03/2012 00:00:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 03 Installation,Manufacture,Fabrication
10 Straightening ofmetals
Super plastic formingof titanium alloys
ADET0161 Superplastic formingof titanium alloys
C NO_AIRBUS_PI - Yes QUALIFIED 30/11/2016 14:23:39 NONE 27/08/2008 00:00:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 03 Installation,Manufacture,Fabrication
10 Straightening ofmetals
Super plastic formingof titanium alloys
AIPS03-10-008 Superplastic Formingof Titanium Alloys
7 AIPI03-10-008 Superplastic formingof titanium alloys
A2 Yes QUALIFIED 22/09/2011 00:00:00 NONE 22/09/2011 00:00:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Application ofexternal paint
systems
AIPS05-02-003 Application ofexternal paint
systems
5 AIPI05-02-003 Application ofexternal paint
systems
2 Yes QUALIFIED WITHLIMITATIONS
14/06/2017 14:45:26 limitation on varnishapplication
21/04/2017 10:46:57
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 05 Paints, Coatings,Filler, Sealant
05 Sealant Sealing of aircraftstructure
AIPS05-05-001 Sealing of aircraftstructure
5 AIPI05-05-001 SEALING OFAIRCRAFT
STRUCTURE
A3 Yes QUALIFIED WITHLIMITATIONS
19/02/2016 15:28:45 ONLY USE FORRIVETING
PROCESS / ONLYINTERPOSITION
11/01/2016 00:00:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 05 Paints, Coatings,Filler, Sealant
05 Sealant Wet installation offasteners
AIPS05-05-004 Wet installation offasteners
6 AIPI05-05-004 Wet installation offasteners
A4 Yes QUALIFIED WITHLIMITATIONS
19/02/2016 15:31:39 ONLY USE FORRIVETINGPROCESS
11/01/2016 00:00:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 06 Bonding 01 Pre-treatment Mechanical surfacepreparation of non-structural adherend
prior to adhesivebonding
AIPS06-01-004 Mechanical surfacepreparation of non-structural adherend
prior to adhesivebonding
2 AIPI06-01-004 MECHANICALSURFACE
PREPARATION OFNON-STRUCTURALADHEREND PRIOR
TO ADHESIVEBONDING
A2 Yes QUALIFIED 23/12/2016 10:03:42 18/10/2016 09:26:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 06 Bonding 01 Pre-treatment Surface preparationof adherends forsilicone based
ahesives sealants
AIPS06-01-008 Surface preparationofl adherends for
silicone basedahesives sealants
1 AIPI06-01-008 Surface preparationof adherends forsilicone based
adhesivessealants
1 Yes QUALIFIED 23/12/2016 10:08:00
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 06 Bonding 02 Manufacture Non-structuralAdhesive bonding.
AIPS06-02-002 Non-structuraladhesive bonding
4 AIPI06-02-002 NON STRUCTURALADHESIVEBONDING
A2 Yes QUALIFIED 23/12/2016 09:56:43 18/10/2016 09:34:05
133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A TBD TBD Linear FrictionWelding
AIPS01-04-019 Linear FrictionWelding for Titanium
Alloys
2 NO_AIRBUS_PI - Yes QUALIFIED 17/05/2016 15:21:32
133966 ZODIAC AERODUCT SYSTEMS
5 RUE DESATELIERS
COMPIEGNECEDEX
60202 France N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Installation of BlindBolts and Blind
Rivets - Pull-type -
ADET0134 Installation of blindfasteners
D NO_AIRBUS_PI - Yes QUALIFIED WITHLIMITATIONS
FACC - RSS A380 24/03/2016 10:07:24
133966 ZODIAC AERODUCT SYSTEMS
5 RUE DESATELIERS
COMPIEGNECEDEX
60202 France N/A 01 JoiningTechniques
04 Weldling, Brazing,Soldering
Generalrequirements for
welding and alliedprocesses
ADET0074 Generalrequirements on
welding all materials
F NA Yes QUALIFIED WITHLIMITATIONS
28/09/2015 00:00:00 ONLY FOR FACCWP L423000 & WP
L413000 (ONLYFOR ALUMINIUM
ALLOY)
28/09/2015 00:00:00
133966 ZODIAC AERODUCT SYSTEMS
5 RUE DESATELIERS
COMPIEGNECEDEX
60202 France N/A 01 JoiningTechniques
04 Weldling, Brazing,Soldering
Tungsten Inert Gaswelding of metallic
materials
ADET0203 TIG welding B NA Yes QUALIFIED WITHLIMITATIONS
28/09/2015 00:00:00 ONLY FOR FACCWP L423000 & WP
L413000 (ONLYFOR ALUMINIUM
ALLOY)
28/09/2015 00:00:00
133966 ZODIAC AERODUCT SYSTEMS
5 RUE DESATELIERS
COMPIEGNECEDEX
60202 France N/A 05 Paints, Coatings,Filler, Sealant
05 Sealant Wet installation offasteners
ADET0187 Wet installation offasteners
A IPDA77-01 DEFROSTING -APPLICATION OF
SEALANTS
A6 Yes QUALIFIED WITHLIMITATIONS
FACC - RSS A380 24/03/2016 10:12:12
133966 ZODIAC AERODUCT SYSTEMS
5 RUE DESATELIERS
COMPIEGNECEDEX
60202 France N/A 07 Electrical 01 Assembly Electrical bonding AIPS07-01-006 Electrical bonding 8 AIPI07-01-006 Electrical Bonding A9 Yes QUALIFIED WITHLIMITATIONS
FACC RSSA380 24/03/2016 10:26:19
134349 ADEL WIGGINSGROUP
TRANSDIGM INC
5000 TRIGGSSTREET
LOS ANGELES 90022 USA N/A 02 SurfaceTreatments
05 Phosphating,chromate conversion,
passivation
Chemical conversioncoating
ABP1-5057 CONVERSIONCOATING OFALUMINIUM
6 ABP1-5057 CONVERSIONCOATING OFALUMINIUM
6 Yes QUALIFIED 14/12/2016 09:54:06 NONE 18/11/2010 00:00:00
134349 ADEL WIGGINSGROUP
TRANSDIGM INC
5000 TRIGGSSTREET
LOS ANGELES 90022 USA N/A 02 SurfaceTreatments
05 Phosphating,chromate conversion,
passivation
Chemical conversioncoating
AIPS02-05-001 Chemical conversioncoating
3 ABP1-5057 CONVERSIONCOATING OFALUMINIUM
6 Yes AIPS/AITMCOMPLIANT WITH
LEGACYQUALIFICATION
14/12/2016 09:54:06 ABP1-5057 SCOPE& LIMITATIONS(REMARKS) INACCORDANCE
WITH AIPS00-00-006 TABLE 4.1
18/11/2010 00:00:00
134656 ZODIACAEROSAFETY
SYSTEMS
4 RUE LESAGEMAILLE
CAUDEBEC LESELBEUF
76320 France N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Bolt torque tightening ADET0030 Structural bolttightening torques
O IPDA71-03 APPL COUPLESERRAGE
BOULONNERIESTRUCTUR
A2 Yes QUALIFIED WITHLIMITATIONS
Limitation to de-icingsystem
08/03/2017 11:27:05
External Report Created On
Airbus SAS, 2015. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of Airbus SAS. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of Airbus SAS. This document and its content shall not be used for any purpose other than that for which it is supplied.
04 Dec 2017 11:06
2/712
External Shop Process Family Process Specification(PS) / Process Instruction (PI) Couple qualification Status Only for NDT EQUIPMENT SIZES
ARP-ID Company Name Street City ZIP-Code Country Specialist Family Sub Family Process Ref. No. (PS) Title (PS) PS Current Version Ref. No. (PI) Title (PI) PI Current Version Special Process Status Expiry Date Date of last statusupdate
Limitations QCS Ref. Number QCS Title QCSMaterial/shape/thickn
ess scope
Max Width (cm): Max Length (cm): Max Height (cm): First ATP orQualification date
134656 ZODIACAEROSAFETY
SYSTEMS
4 RUE LESAGEMAILLE
CAUDEBEC LESELBEUF
76320 France N/A 05 Paints, Coatings,Filler, Sealant
05 Sealant Application of lowadhesion sealants
ADET0082 Application ofsealants
L IPDA77-01 DEFROSTING -APPLICATION OF
SEALANTS
A6 Yes QUALIFIED WITHLIMITATIONS
Limitation to de-icingsystem
08/03/2017 11:35:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Bolt torque tightening ABP2-2336 COMMONREQUIREMENTSFOR INSTALLINGBOLTS, STUDS,
NUTS AND OTHERFASTENING
PARTS.
6 ABP2-2336 COMMONREQUIREMENTSFOR INSTALLINGBOLTS, STUDS,
NUTS AND OTHERFASTENING
PARTS.
6 Yes QUALIFIED 14/12/2016 09:55:36 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Bolt torque tightening AIPS01-02-008 Torque tightening ofscrews, bolts and
nuts
9 AIPI01-02-008 TIGHTENINGTORQUES FORSTRUCTURALFASTENERS
A3 Yes QUALIFIED 28/04/2014 00:00:00 NONE 28/04/2014 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
General assemblyand installation of
fasteners
AIPS01-02-017 General assemblyand installation of
fasteners
4 ABP2-2336 COMMONREQUIREMENTSFOR INSTALLINGBOLTS, STUDS,
NUTS AND OTHERFASTENING
PARTS.
6 Yes AIPS/AITMCOMPLIANT WITH
LEGACYQUALIFICATION
14/12/2016 09:55:36 ABP2-2336 SCOPE& LIMITATIONS(REMARKS) INACCORDANCE
WITH AIPS00-00-006 TABLE 4.1
14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Installation of BlindBolts and Blind
Rivets - Pull-type -
ABP2-1067 RIVETING WITHBLIND RIVETS
3 ABP2-1067 RIVETING WITHBLIND RIVETS
3 Yes QUALIFIED 14/12/2016 09:55:36 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Installation of BlindBolts and Blind
Rivets - Pull-type -
ABP2-1069 RIVETING WITHBLIND FLUSH
BREAK RIVETSAVDEL MBC
1-4 ABP2-1069 RIVETING WITHBLIND FLUSH
BREAK RIVETSAVDEL MBC
1-4 Yes QUALIFIED 14/12/2016 09:55:37 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Installation of BlindBolts and Blind
Rivets - Pull-type -
ABP2-2077 MANUALFASTENING WITH
BLIND BOLTSCOMPOSI-LOK
1 ABP2-2077 MANUALFASTENING WITH
BLIND BOLTSCOMPOSI-LOK
1 Yes QUALIFIED 14/12/2016 09:55:36 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Installation of BlindBolts and Blind
Rivets - Pull-type -
AIPS01-02-013 Installation of BlindBolts and Blind
Rivets - Pull-type -
5 AIPI01-02-013 Installation of BlindBolts and Blind
Rivets - Pull-type -
A3 Yes QUALIFIED 24/03/2015 00:00:00 NONE 24/03/2015 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Installation of parallelshank threaded
fasteners
ABP2-2075 MANUALFASTENING WITHSHORT THREAD
POINT DRIVEBOLTS
6 ABP2-2075 MANUALFASTENING WITHSHORT THREAD
POINT DRIVEBOLTS
6 Yes QUALIFIED 14/12/2016 09:55:38 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Installation of parallelshank threaded
fasteners
AIPS01-02-022 Installation of parallelshank threaded
fasteners
4 ABP2-2075 MANUALFASTENING WITHSHORT THREAD
POINT DRIVEBOLTS
6 Yes AIPS/AITMCOMPLIANT WITH
LEGACYQUALIFICATION
14/12/2016 09:55:37 ABP2-2075 SCOPE& LIMITATIONS(REMARKS) INACCORDANCE
WITH AIPS00-00-006 TABLE 4.1
14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Installation of parallelshank threaded
fasteners
AIPS01-02-022 Installation of parallelshank threaded
fasteners
4 ABP2-2336 COMMONREQUIREMENTSFOR INSTALLINGBOLTS, STUDS,
NUTS AND OTHERFASTENING
PARTS.
6 Yes AIPS/AITMCOMPLIANT WITH
LEGACYQUALIFICATION
14/12/2016 09:55:37 ABP2-2336 SCOPE& LIMITATIONS(REMARKS) INACCORDANCE
WITH AIPS00-00-006 TABLE 4.1
14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Preparation of Holesin Fibre Reinforced
Plastic FRP andMixed FRPMetalAssemblies for
Fastening
ABP6-2183 MACHININGCOMPOSITES
2-2 ABP6-2183 MACHININGCOMPOSITES
2-2 Yes QUALIFIED 14/12/2016 09:55:37 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Preparation of Holesin Fibre Reinforced
Plastic FRP andMixed FRPMetalAssemblies for
Fastening
AIPS01-02-005 Preparation of Holesin Plastic and Mixed
PlasticMetalAssemblies for
Fastening
11 AIPI01-02-005 Preparartion of holesin fibre reinforcedplastic FRP and
mixed FRPMETALassemblies for
fastening
A4 Yes QUALIFIED 21/04/2017 14:41:19 27/10/2016 10:24:40
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
03 Inserts, Locking Installation of metallicinserts acres sleeves
ABP2-3095 INSTALLINGMETALLIC INSERTS
ACRES SLEEVES
1-1 ABP2-3095 INSTALLINGMETALLIC INSERTS
ACRES SLEEVES
1-1 Yes QUALIFIED 14/12/2016 09:55:43 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
03 Inserts, Locking Installation of metallicinserts acres sleeves
AIPS01-03-005 Installation of metallicinserts Acres sleeves
4 AIPI01-03-005 Installation of metallicinserts Acres sleeves
2 Yes AUTHORISATIONTO PROCEED WITH
LIMITATIONS
2017-12-30 14/03/2017 12:21:02 ABS 1763 SLEEVESREF CTRM TN
2012-0063 AND ABS0895-4-06 SLEEVES
REF CTRM TN2012-0096.
05/01/2016 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
03 Inserts, Locking Manual fastening of2- or 4- start quickrelease fasteners
with or without acressleeves
ABP2-2081 MANUALFASTENING WITH4-START QUICK
RELEASEFASTENERS
2--3 ABP2-2081 MANUALFASTENING WITH4-START QUICK
RELEASEFASTENERS
2--3 Yes QUALIFIED 14/12/2016 09:55:42 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 01 JoiningTechniques
03 Inserts, Locking Manual fastening of2- or 4- start quickrelease fasteners
with or without acressleeves
AIPS01-03-002 Manual fastening of2- or 4- start quickrelease fasteners
with or without acressleeves
5 AIPI01-03-002 Manual fastening of2- or 4- start quickrelease fasternerswith oder without
acres sleeves
1 Yes AUTHORISATIONTO PROCEED WITH
LIMITATIONS
2017-12-30 14/03/2017 12:22:00 REF TO CTRMQUALIFICATION
REPORTS TN 2012-0063 AND 2012-
0096
05/01/2016 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 02 SurfaceTreatments
05 Phosphating,chromate conversion,
passivation
Chemical conversioncoating
ABP1-5057 CONVERSIONCOATING OFALUMINIUM
6 ABP1-5057 CONVERSIONCOATING OFALUMINIUM
6 Yes QUALIFIED 14/12/2016 09:55:42 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 03 Installation,Manufacture,Fabrication
02 Compositestructural, non-
metallic
Manufacture ofstructural sandwich
parts withthermosetting fibre
reinforced skins
ABP6-2185 MANUFACTURE OFCARBON-FIBRE
EPOXY PREPREGCOMPOSITES BY
AUTOCLAVE
7 ABP6-2185 MANUFACTURE OFCARBON-FIBRE
EPOXY PREPREGCOMPOSITES BY
AUTOCLAVE
7 Yes QUALIFIED WITHLIMITATIONS
20/04/2012 00:00:00 ADDITION OFAUTHORISATION
TO PROCEED FORHONEYCOMB
FORMING FORSINGLE AISLE FLAP
TRACK FAIRINGSWORK PACKAGEREF: TS/AD/262PENDING FIRST
ARTICLEACCEPTANCE
19/04/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 03 Installation,Manufacture,Fabrication
02 Compositestructural, non-
metallic
Manufacture ofstructural sandwich
parts withthermosetting fibre
reinforced skins
ABP6-2189 MANUFACTURE OFGLASS-FIBRE AND
ARAMID-FIBREEPOXY PREPREGCOMPOSITES BY
AUTOCLAVE
7 ABP6-2189 MANUFACTURE OFGLASS-FIBRE AND
ARAMID-FIBREEPOXY PREPREGCOMPOSITES BY
AUTOCLAVE
7 Yes QUALIFIED 04/06/2012 00:00:00 NONE 29/05/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 03 Installation,Manufacture,Fabrication
02 Compositestructural, non-
metallic
Manufacture ofstructural sandwich
parts withthermosetting fibre
reinforced skins
AIPS03-02-018 Manufacture ofStructural Sandwich
Parts withThermosetting Fiber
Reinforced Skins
7 AIPI03-02-018 Manufacture ofStructural Sandwich
Parts withThermosetting Fiber
Reinforced Skins
A3 Yes QUALIFIED 30/07/2012 00:00:00 NONE 30/07/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 03 Installation,Manufacture,Fabrication
02 Compositestructural, non-
metallic
Manufacturing ofCFRP and GFRP
with thermosetprepreg material
AIPS03-02-019 Manufacture ofMonolithic Parts withThermoset Prepreg
Materials
11 AIPI03-02-019 Manufacture ofMonolithic Parts withThermoset Prepreg
Materials
A3 Yes QUALIFIED 20/04/2012 00:00:00 NONE 20/04/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 03 Installation,Manufacture,Fabrication
07 Composites, non-structural
Machining of fibrereinforced plasticFRP components
AIPS03-07-002 Machining of fibrereinforced plasticFRP components
7 AIPI03-07-002 Machining of FibreReinforced PlasticFRP Components
A2 Yes QUALIFIED WITHLIMITATIONS
20/06/2013 00:00:00 ONLYMONOLYTHICCOMPOSITES
19/06/2013 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 03 Installation,Manufacture,Fabrication
08 Rework ofComposites
Rework of StructuresManufactured from
Composite MaterialsLaminates and
Sandwich
AIPS03-08-003 Rework of StructuresManufactured from
Composite MaterialsLaminates and
Sandwich
5 AIPI03-08-003 Rework of structuresmanufactured fromcomposite materials
laminates andsandwich
A4 Yes QUALIFIED WITHLIMITATIONS
12/06/2012 00:00:00 FOR REPAIRSAUTHORISED BY
CONCESSION ANDREWORK AS PER
AIPI 03-08-003
08/06/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
01 Primer Application of basicprimer
ABP4-1123 APPLICATION OFCORROSION
INHIBITING PRIMERTO AN INTERNAL
OR EXTERNALSURFACE
22 ABP4-1123 APPLICATION OFCORROSION
INHIBITING PRIMERTO AN INTERNAL
OR EXTERNALSURFACE
22 Yes QUALIFIED 14/12/2016 09:55:38 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Application of anti-erosion paint
ABP4-2133 APPLICATION OFEROSION
RESISTANT PAINT
7 ABP4-2133 APPLICATION OFEROSION
RESISTANT PAINT
7 Yes QUALIFIED 14/12/2016 09:55:38 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Application of anti-static paints oncomposite parts
ABP4-2125 APPLICATION OFANTI-STATIC PAINTTO COMPOSITES
EXCLUDINGCARBON FIBRE
5 ABP4-2125 APPLICATION OFANTI-STATIC PAINTTO COMPOSITES
EXCLUDINGCARBON FIBRE
5 Yes QUALIFIED 14/12/2016 09:55:39 NONE 14/12/2009 00:00:00
External Report Created On
Airbus SAS, 2015. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of Airbus SAS. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of Airbus SAS. This document and its content shall not be used for any purpose other than that for which it is supplied.
04 Dec 2017 11:06
3/712
External Shop Process Family Process Specification(PS) / Process Instruction (PI) Couple qualification Status Only for NDT EQUIPMENT SIZES
ARP-ID Company Name Street City ZIP-Code Country Specialist Family Sub Family Process Ref. No. (PS) Title (PS) PS Current Version Ref. No. (PI) Title (PI) PI Current Version Special Process Status Expiry Date Date of last statusupdate
Limitations QCS Ref. Number QCS Title QCSMaterial/shape/thickn
ess scope
Max Width (cm): Max Length (cm): Max Height (cm): First ATP orQualification date
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Application ofexternal paint
systems
ABP4-2126 APPLICATION OFPOLYURETHANE
FINISH PAINTS TOAN INTERNAL OR
EXTERNALSURFACE
6 ABP4-2126 APPLICATION OFPOLYURETHANE
FINISH PAINTS TOAN INTERNAL OR
EXTERNALSURFACE
6 Yes QUALIFIED 14/12/2016 09:55:39 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Application ofexternal paint
systems
ABP4-2127 APPLICATION OFFLEXIBLE FINISHPAINT SCHEME
INCORPORATING ACHROMATED
PRIMER TO ANEXTERNALSURFACE
18 ABP4-2127 APPLICATION OFFLEXIBLE FINISHPAINT SCHEME
INCORPORATING ACHROMATED
PRIMER TO ANEXTERNALSURFACE
18 Yes QUALIFIED 14/12/2016 09:55:39 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Application ofexternal paint
systems
ABP4-2364 APPLICATION OFFLEXIBLE FINISHPAINT SCHEME
INCORPORATING ACHROMATE-FREE
PRIMER TO ANEXTERNALSURFACE
7 ABP4-2364 APPLICATION OFFLEXIBLE FINISHPAINT SCHEME
INCORPORATING ACHROMATE-FREE
PRIMER TO ANEXTERNALSURFACE
7 Yes QUALIFIED 14/12/2016 09:55:39 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Application ofexternal paint
systems
AIPS05-02-003 Application ofexternal paint
systems
5 AIPI05-02-003 Application ofexternal paint
systems
2 Yes QUALIFIED 18/10/2012 00:00:00 NONE 18/10/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Application ofstructural paints
ABP4-2130 APPLICATION OFFLEXIBLE FINISH
PAINT TO ANINTERNALSURFACE
16 ABP4-2130 APPLICATION OFFLEXIBLE FINISH
PAINT TO ANINTERNALSURFACE
16 Yes QUALIFIED 14/12/2016 09:55:40 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Application ofstructural paints
ABP4-3135 APPLICATION OFFILLER TO SMALL
HOLES
6 ABP4-3135 APPLICATION OFFILLER TO SMALL
HOLES
6 Yes QUALIFIED 14/12/2016 09:55:40 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Application ofstructural paints
ABP4-3350 APPLICATION OFPINHOLE FILLER
2 ABP4-3350 APPLICATION OFPINHOLE FILLER
2 Yes QUALIFIED 14/12/2016 09:55:40 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Application ofstructural paints
AIPS05-02-009 Application ofstructural paints
4 AIPI05-02-009 APPLICATION OFSTRUCTURAL
PAINTS
A2 Yes QUALIFIED 27/07/2011 00:00:00 NONE 27/07/2011 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Rework of paints onmetallic and
nonmetallic structuralparts
AIPS05-02-011 Rework of paints onmetallic and non-metallic structural
parts
4 AIPI05-02-011 Rework of paints onmetallic and non-metallic structural
parts
2 Yes QUALIFIED 08/04/2011 00:00:00 NONE 08/04/2011 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05 Sealant Application of lowadhesion sealants
ABP4-5142 APPLICATION OFSEALANT FOR
GENERALAIRCRAFT
STRUCTURE
16 ABP4-5142 APPLICATION OFSEALANT FOR
GENERALAIRCRAFT
STRUCTURE
16 Yes QUALIFIED 14/12/2016 09:55:43 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05 Sealant Application of nonhardening jointing
compounds
ABP4-5144 APPLICATION OFNON-HARDENING
JOINTINGCOMPOUNDS AS
SEALANT
5 ABP4-5144 APPLICATION OFNON-HARDENING
JOINTINGCOMPOUNDS AS
SEALANT
5 Yes QUALIFIED 14/12/2016 09:55:43 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05 Sealant Preservation of CutEdges of CarbonFibre CompositeParts to prevent
Galvanic Corrosionon attached Metal
Parts
AIPS05-05-009 Preservation of CutEdges of CarbonFibre CompositeParts to prevent
Galvanic Corrosionon attached Metal
Parts
2 AIPI05-05-009 Preservation of CutEdges of CarbonFibre CompositeParts to prevent
Galvanic Corrosionon attached Metal
Parts
A4 Yes QUALIFIED 20/04/2012 00:00:00 NONE 20/04/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05 Sealant Process for themanufature of form-in-place seals using
sealants
ABP6-4221 MANUFACTURE OFFORM-IN-PLACE
SEALS USINGSEALANT
4 ABP6-4221 MANUFACTURE OFFORM-IN-PLACE
SEALS USINGSEALANT
4 Yes QUALIFIED 14/12/2016 09:55:43 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05 Sealant Process for themanufature of form-in-place seals using
sealants
AIPS05-05-005 Process for themanufacture of form-in-place seals using
sealant
3 AIPI05-05-005 Process for themanufacture of form-in-place seals using
sealant
A2 Yes QUALIFIED 18/10/2012 00:00:00 NONE 18/10/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05 Sealant Sealing of aircraftstructure
ABP4-3329 APPPLICATION OFAERODYNAMIC
FILLER SEALANT
4 ABP4-3329 APPPLICATION OFAERODYNAMIC
FILLER SEALANT
4 Yes QUALIFIED 14/12/2016 09:56:27 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05 Sealant Sealing of aircraftstructure
AIPS05-05-001 Sealing of aircraftstructure
5 ABP4-3329 APPPLICATION OFAERODYNAMIC
FILLER SEALANT
4 Yes AIPS/AITMCOMPLIANT WITH
LEGACYQUALIFICATION
17/05/2017 14:22:04 ABP4-3329 SCOPE& LIMITATIONS(REMARKS) INACCORDANCE
WITH AIPS00-00-006 TABLE 4.1
14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05 Sealant Sealing of aircraftstructure
AIPS05-05-001 Sealing of aircraftstructure
5 ABP4-5142 APPLICATION OFSEALANT FOR
GENERALAIRCRAFT
STRUCTURE
16 Yes AIPS/AITMCOMPLIANT WITH
LEGACYQUALIFICATION
17/05/2017 14:22:04 ABP4-5142 SCOPE& LIMITATIONS(REMARKS) INACCORDANCE
WITH AIPS00-00-006 TABLE 4.1
14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05 Sealant Surface protection offasteners andsealants by
application of varnish
AIPS05-05-003 Surface protection offasteners andsealants by
application of varnish
3 AIPI05-05-003 Surface protection offasteners andsealants by
application of varnish
A4 Yes QUALIFIED 28/04/2014 00:00:00 NONE 28/04/2014 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant
05 Sealant Wet installation offasteners
AIPS05-05-004 Wet installation offasteners
6 ABP4-5142 APPLICATION OFSEALANT FOR
GENERALAIRCRAFT
STRUCTURE
16 Yes AIPS/AITMCOMPLIANT WITH
LEGACYQUALIFICATION
14/12/2016 09:56:27 ABP4-5142 SCOPE& LIMITATIONS(REMARKS) INACCORDANCE
WITH AIPS00-00-006 TABLE 4.1
14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 06 Bonding 01 Pre-treatment Surface preparationfor thermosetting
parts beforestructural bonding
AIPS06-01-003 Surface Preparationfor Thermosetting
parts beforestructural bonding
5 AIPI06-01-003 Surface preparationfor thermosetting
parts beforestructural bonding
A3 Yes QUALIFIED 04/06/2012 00:00:00 NONE 29/05/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 06 Bonding 02 Manufacture Non-structuralAdhesive bonding.
ABP5-1149 ADHESIVEBONDING WITH
TWO PART EPOXY.HYSOL AND 3M
4 ABP5-1149 ADHESIVEBONDING WITH
TWO PART EPOXY.HYSOL AND 3M
4 Yes QUALIFIED 14/12/2016 09:55:42 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 06 Bonding 02 Manufacture Non-structuralAdhesive bonding.
ABP5-1153 ADHESIVEBONDING OF
SILICONE RUBBERWITH SILICONE
ADHESIVE
4 ABP5-1153 ADHESIVEBONDING OF
SILICONE RUBBERWITH SILICONE
ADHESIVE
4 Yes QUALIFIED 04/06/2012 00:00:00 NONE 29/05/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 06 Bonding 02 Manufacture Non-structuralAdhesive bonding.
ABP5-1158 ADHESIVEBONDING WITH
TWO PART EPOXYARALDITE
4 ABP5-1158 ADHESIVEBONDING WITH
TWO PART EPOXYARALDITE
4 Yes QUALIFIED 14/12/2016 09:55:42 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 06 Bonding 02 Manufacture Non-structuralAdhesive bonding.
ABP5-1162 ADHESIVEBONDING WITH
TWO PARTACRYLIC
10 ABP5-1162 ADHESIVEBONDING WITH
TWO PARTACRYLIC
10 Yes QUALIFIED 18/10/2012 00:00:00 NONE 18/10/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 06 Bonding 02 Manufacture Non-structuralAdhesive bonding.
ABP5-1164 ADHESIVEBONDING OFCURED FIBREREINFORCEDCOMPOSITES
2 ABP5-1164 ADHESIVEBONDING OFCURED FIBREREINFORCEDCOMPOSITES
2 Yes QUALIFIED 14/12/2016 09:55:42 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 06 Bonding 02 Manufacture Non-structuralAdhesive bonding.
AIPS06-02-002 Non-structuraladhesive bonding
4 AIPI06-02-002 NON STRUCTURALADHESIVEBONDING
A2 Yes QUALIFIED 02/04/2012 00:00:00 NONE 02/04/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 07 Electrical 01 Assembly Electrical bonding ABP7-1246 ELECTRICALBONDING ANDEARTHING FOR
AIRBUSREQUIREMENTS
DURINGASSEMBLY
9 ABP7-1246 ELECTRICALBONDING ANDEARTHING FOR
AIRBUSREQUIREMENTS
DURINGASSEMBLY
9 Yes QUALIFIED 14/12/2016 09:55:38 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 07 Electrical 01 Assembly Electrical bonding AIPS07-01-006 Electrical bonding 8 AIPI07-01-006 Electrical Bonding A9 Yes QUALIFIED WITHLIMITATIONS
28/04/2014 00:00:00 LIMITATION FORASSEMBLY
PROCESS 12, SPMETHOD 11, FPMETHOD 3 AND
BONDING CLASS 3
28/04/2014 00:00:00
External Report Created On
Airbus SAS, 2015. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of Airbus SAS. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of Airbus SAS. This document and its content shall not be used for any purpose other than that for which it is supplied.
04 Dec 2017 11:06
4/712
External Shop Process Family Process Specification(PS) / Process Instruction (PI) Couple qualification Status Only for NDT EQUIPMENT SIZES
ARP-ID Company Name Street City ZIP-Code Country Specialist Family Sub Family Process Ref. No. (PS) Title (PS) PS Current Version Ref. No. (PI) Title (PI) PI Current Version Special Process Status Expiry Date Date of last statusupdate
Limitations QCS Ref. Number QCS Title QCSMaterial/shape/thickn
ess scope
Max Width (cm): Max Length (cm): Max Height (cm): First ATP orQualification date
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A 09 Cleaning, De-oxidation, Pickling,Chemical Coating
04 Masking Surface preparationprior to external paint
application
AIPS09-04-001 Surface preparationprior to external paint
application
2 AIPI09-04-001 Surface preparationprior to external paint
application
2 Yes QUALIFIED 10/12/2013 00:00:00 NONE 10/12/2013 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A Non DestructiveTesting
Direct Reading Measure ResistanceOf Electrical Bonding
Points
AITM6-9008 Electrical bondingMeasure resistanceof electrical bonding
points
4 NA Yes QUALIFIED WITHLIMITATIONS
28/04/2014 00:00:00 LIMITATION TOTEST METHOD # 1
28/04/2014 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A Non DestructiveTesting
NDI generic Non DestructiveInspection of
Composite Parts
ABP6-5233 TESTINGCOMPOSITES BY
ULTRASONIC FLAWDETECTION
6 ABP6-5233 TESTINGCOMPOSITES BY
ULTRASONIC FLAWDETECTION
6 Yes QUALIFIED 05/06/2014 00:00:00 NONE 05/06/2014 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A Non DestructiveTesting
Ultrasonic Throughtransmission
ultrasonic inspectionof CFRP and
sandwich
AITM6-4002 Ultrasonic throughtransmission
Inspection of fibrecomposite
7 NA Yes QUALIFIED 12/11/2012 00:00:00 NONE 12/11/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A Non DestructiveTesting
Ultrasonic Ultrasonic pulse echoinspection of CFRP
AITM6-4005 Ultrasonic pulse-echo inspection of
carbon fibre plastics
10 NA Yes QUALIFIED 08/04/2016 15:13:03 12/11/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A Non DestructiveTesting
Ultrasonic Ultrasonic pulse-echo inspection of
areas aroundfastener and rivet
holes in composites
AITM6-4022 Ultrasonic pulse-echo inspection of
areas aroundfastener and rivet
holes in composites
3 NA Yes QUALIFIED 12/11/2012 00:00:00 NONE 12/11/2012 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A Non DestructiveTesting
Ultrasonic Ultrasonic testing ofmetallic materials
plates, bars,extrusions and
blanks
ABP0-2017 SUPPLY OFALUMINIUM PLATEWITH ULTRASONICFLAW DETECTION
2 NA Yes QUALIFIED 14/12/2016 09:55:41 NONE 14/12/2009 00:00:00
134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE
TECHNOLOGY CITY
COMPOSITESTECHNOLOGY CITY
MELAKA 75300 Malaysia N/A TBD TBD APPLICATION OFBONDING PRIMER
AS EROSIONRESISTANTCOATING
ABP4-1121 APPLICATION OFBONDING PRIMER
AS EROSIONRESISTANTCOATING
4 ABP4-1121 APPLICATION OFBONDING PRIMER
AS EROSIONRESISTANTCOATING
4 Yes QUALIFIED 14/12/2016 09:55:38 NONE 14/12/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Bolt torque tightening 80-T-34-3050 Tightening of Screwsand Nuts
80-T-34-3050 Tightening of Screwsand Nuts
Yes QUALIFIED 26/03/2015 00:00:00 NONE 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Bolt torque tightening ABP2-2336 COMMONREQUIREMENTSFOR INSTALLINGBOLTS, STUDS,
NUTS AND OTHERFASTENING
PARTS.
6 ABP2-2336 COMMONREQUIREMENTSFOR INSTALLINGBOLTS, STUDS,
NUTS AND OTHERFASTENING
PARTS.
6 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Bolt torque tightening AIPS01-02-008 Torque tightening ofscrews, bolts and
nuts
9 AIPI01-02-008 TIGHTENINGTORQUES FORSTRUCTURALFASTENERS
A3 Yes QUALIFIED 10/06/2013 00:00:00 NONE 10/06/2013 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
General assemblyand installation of
fasteners
80-T-34-3001 Installation ofFasteners and Nuts
80-T-34-3001 Installation ofFasteners and Nuts
Yes QUALIFIED 04/04/2017 12:14:40 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
General assemblyand installation of
fasteners
AIPS01-02-017 General assemblyand installation of
fasteners
4 AIPI01-02-017 General assemblyand installation of
fasteners
3 Yes QUALIFIED 10/06/2013 00:00:00 NONE 10/06/2013 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Installation of BlindBolts and Blind
Rivets - Pull-type -
80-T-34-5822 Installation of NASBlind Rivets and MS-NASM- ans EN Blind
Bolts
80-T-34-5822 Installation of NASBlind Rivets and MS-NASM- ans EN Blind
Bolts
Yes QUALIFIED 26/03/2015 00:00:00 NONE 230.00 90.00 80.00 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Installation of BlindBolts and Blind
Rivets - Pull-type -
ABP2-1065 RIVETING WITHBLIND NUT PLATE
RIVETS
2 ABP2-1065 RIVETING WITHBLIND NUT PLATE
RIVETS
2 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Installation of BlindBolts and Blind
Rivets - Pull-type -
ABP2-1066 RIVETING WITHBLIND STEM LOCK
RIVETS AVDEL
1 ABP2-1066 RIVETING WITHBLIND STEM LOCK
RIVETS AVDEL
1 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Installation of BlindBolts and Blind
Rivets - Pull-type -
ABP2-1067 RIVETING WITHBLIND RIVETS
3 ABP2-1067 RIVETING WITHBLIND RIVETS
3 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Installation of BlindBolts and Blind
Rivets - Pull-type -
ABP2-1068 RIVETING WITHBLIND RIVETS
CHOBERT
1 ABP2-1068 RIVETING WITHBLIND RIVETS
CHOBERT
1 Yes QUALIFIED 30/11/2009 00:00:00 NONE 230.00 90.00 80.00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Installation of BlindBolts and Blind
Rivets - Pull-type -
ABP2-1069 RIVETING WITHBLIND FLUSH
BREAK RIVETSAVDEL MBC
1-4 ABP2-1069 RIVETING WITHBLIND FLUSH
BREAK RIVETSAVDEL MBC
1-4 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Installation of BlindBolts and Blind
Rivets - Pull-type -
ABP2-2073 MANUALFASTENING WITH
SELF LOCKINGBLIND BOLTS
1 ABP2-2073 MANUALFASTENING WITH
SELF LOCKINGBLIND BOLTS
1 Yes QUALIFIED 30/11/2009 00:00:00 NONE 500.00 230.00 120.00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Installation ofbushes, shrink and
press fit
ABP2-2082 SHRINK FITTINGOF BOLTS BUSHESPINS AND OTHER
FASTENING PARTS
2 ABP2-2082 SHRINK FITTINGOF BOLTS BUSHESPINS AND OTHER
FASTENING PARTS
2 Yes QUALIFIED 30/11/2009 00:00:00 NONE 230.00 90.00 80.00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Installation of coldexpanded retainers
ABP2-3088 INSTALLINGMETALLIC INSERTS
RIVNUTS
1-3 ABP2-3088 INSTALLINGMETALLIC INSERTS
RIVNUTS
1-3 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Installation of parallelshank threaded
fasteners
AIPS01-02-022 Installation of parallelshank threaded
fasteners
4 ABP2-2336 COMMONREQUIREMENTSFOR INSTALLINGBOLTS, STUDS,
NUTS AND OTHERFASTENING
PARTS.
6 Yes AIPS/AITMCOMPLIANT WITH
LEGACYQUALIFICATION
30/11/2009 00:00:00 ABP2-2336 SCOPE& LIMITATIONS(REMARKS) INACCORDANCE
WITH AIPS00-00-006 TABLE 4.1
30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Preparation of Holesin Fibre Reinforced
Plastic FRP andMixed FRPMetalAssemblies for
Fastening
80-T-30-9910 Drilling, Reaming andCountersinking ofRivet and Screw
Holes
80-T-30-9910 Drilling, Reaming andCountersinking ofRivet and Screw
Holes
Yes QUALIFIED 26/03/2015 00:00:00 NONE 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Preparation of holesin metallic materials
for fastening
ABP2-3097 PREPARATION OFCOUNTERSUNK
HOLES INMETALLIC
MATERIALS FORFASTENING AND
RIVETING
1 ABP2-3097 PREPARATION OFCOUNTERSUNK
HOLES INMETALLIC
MATERIALS FORFASTENING AND
RIVETING
1 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Preparation of holesin metallic materials
for fastening
ABP6-3205 FABRICATION ANDDEBURRING OF
HOLES INMETALLIC
MATERIALS
1 ABP6-3205 FABRICATION ANDDEBURRING OF
HOLES INMETALLIC
MATERIALS
1 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
02 Fastening withbolts and fasteners
Preparation of holesin metallic materials
for fastening
AIPS01-02-003 Preparation of Holesin Metallic Materials
for Fastening
7 AIPI01-02-003 Preparation of holesin metallic materials
for fastening
A1 Yes QUALIFIED 10/06/2013 00:00:00 NONE 400.00 1400.00 1000.00 10/06/2013 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
03 Inserts, Locking Manual fastening of2- or 4- start quickrelease fasteners
with or without acressleeves
ABP2-2081 MANUALFASTENING WITH4-START QUICK
RELEASEFASTENERS
2--3 ABP2-2081 MANUALFASTENING WITH4-START QUICK
RELEASEFASTENERS
2--3 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
03 Inserts, Locking Manual fastening of2- or 4- start quickrelease fasteners
with or without acressleeves
AIPS01-03-002 Manual fastening of2- or 4- start quickrelease fasteners
with or without acressleeves
5 ABP2-2081 MANUALFASTENING WITH4-START QUICK
RELEASEFASTENERS
2--3 Yes AIPS/AITMCOMPLIANT WITH
LEGACYQUALIFICATION
30/11/2009 00:00:00 ABP2-2081 SCOPE& LIMITATIONS(REMARKS) INACCORDANCE
WITH AIPS00-00-006 TABLE 4.1
30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
04 Weldling, Brazing,Soldering
Brazing of MetallicMaterials
ABP2-4099 APPROVAL OFWELDING AND
BRAZINGOPERATORS
9 ABP2-4099 APPROVAL OFWELDING AND
BRAZINGOPERATORS
9 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
04 Weldling, Brazing,Soldering
Brazing of MetallicMaterials
ABP2-4105 MANUAL BRAZINGOF STEELS
COPPER ANDNICKEL ALLOYS
3 ABP2-4105 MANUAL BRAZINGOF STEELS
COPPER ANDNICKEL ALLOYS
3 Yes QUALIFIED 30/11/2009 00:00:00 NONE 0.00 0.00 0.00 30/11/2009 00:00:00
External Report Created On
Airbus SAS, 2015. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of Airbus SAS. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of Airbus SAS. This document and its content shall not be used for any purpose other than that for which it is supplied.
04 Dec 2017 11:06
5/712
External Shop Process Family Process Specification(PS) / Process Instruction (PI) Couple qualification Status Only for NDT EQUIPMENT SIZES
ARP-ID Company Name Street City ZIP-Code Country Specialist Family Sub Family Process Ref. No. (PS) Title (PS) PS Current Version Ref. No. (PI) Title (PI) PI Current Version Special Process Status Expiry Date Date of last statusupdate
Limitations QCS Ref. Number QCS Title QCSMaterial/shape/thickn
ess scope
Max Width (cm): Max Length (cm): Max Height (cm): First ATP orQualification date
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
04 Weldling, Brazing,Soldering
Brazing of MetallicMaterials
ABP2-4106 MANUAL BRAZINGOF ALUMINIUMUSING SILICON
ROD
6 ABP2-4106 MANUAL BRAZINGOF ALUMINIUMUSING SILICON
ROD
6 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
04 Weldling, Brazing,Soldering
Brazing of MetallicMaterials
AIPS01-04-017 Brazing of MetallicMaterials
2 ABP2-4105 MANUAL BRAZINGOF STEELS
COPPER ANDNICKEL ALLOYS
3 Yes AIPS/AITMCOMPLIANT WITH
LEGACYQUALIFICATION
30/11/2009 00:00:00 ABP2-4105 SCOPE& LIMITATIONS(REMARKS) INACCORDANCE
WITH AIPS00-00-006 TABLE 4.1
30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
04 Weldling, Brazing,Soldering
Brazing of MetallicMaterials
AIPS01-04-017 Brazing of MetallicMaterials
2 ABP2-4106 MANUAL BRAZINGOF ALUMINIUMUSING SILICON
ROD
6 Yes AIPS/AITMCOMPLIANT WITH
LEGACYQUALIFICATION
30/11/2009 00:00:00 ABP2-4106 SCOPE& LIMITATIONS(REMARKS) INACCORDANCE
WITH AIPS00-00-006 TABLE 4.1
30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
04 Weldling, Brazing,Soldering
Generalrequirements for
welding and alliedprocesses
80-T-34-6620 Inert Gas FusionWelding TIG
80-T-34-6620 Inert Gas FusionWelding TIG
Yes QUALIFIED 26/03/2015 00:00:00 NONE 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
04 Weldling, Brazing,Soldering
Plasma Arc Weldingof Metallic Materials
ABP2-4355 ACCEPTANCESTANDARDS FORTUNGSTEN INERT
GAS T.I.G.PLASMA ARC
WELDING P.A.W.PROCESSES
4 ABP2-4355 ACCEPTANCESTANDARDS FORTUNGSTEN INERT
GAS T.I.G.PLASMA ARC
WELDING P.A.W.PROCESSES
4 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques
04 Weldling, Brazing,Soldering
Tungsten Inert Gaswelding of metallic
materials
ABP2-4102 TUNGSTEN INERTGAS TIG WELDING
8 ABP2-4102 TUNGSTEN INERTGAS TIG WELDING
8 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 02 SurfaceTreatments
01 Anodizing Tartaric sulfuricanodising of
aluminium alloys forcorrosion protection
and paintpretreatment
AIPS02-01-003 Tartaric SulphuricAnodising of
aluminium alloys forcorrosion protection
and paintpretreatment.
2 AIPI02-01-003 Tartaric SulphuricAnodizing of
aluminium alloysTSA
A3 Yes QUALIFIED WITHLIMITATIONS
23/08/2017 11:39:52 PAINTED PARTSONLY
17/06/2016 11:59:35
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 02 SurfaceTreatments
05 Phosphating,chromate conversion,
passivation
Chemical conversioncoating
80-T-35-1101 Chromating ofAluminum andAluminum Alloy
80-T-35-1101 Chromating ofAluminum andAluminum Alloy
Yes QUALIFIED WITHLIMITATIONS
26/03/2015 00:00:00 QUALIFIED ONLYFOR USE OF
ALODINE PEN FORREWORK
25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 02 SurfaceTreatments
05 Phosphating,chromate conversion,
passivation
Chemical conversioncoating
80-T-35-9124 Repair of PaintCoatings on Metallic
and Non-MetallicSurfaces
80-T-35-9124 Repair of PaintCoatings on Metallic
and Non-MetallicSurfaces
Yes QUALIFIED 26/03/2015 00:00:00 NONE 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 03 Installation,Manufacture,Fabrication
03 Fabrication,bearings, swaging
Rework of scratchesin Aluminium alloyson external surfaces
80-T-39-0230 Treatment ofDamage on
Components Made ofAluminium-Alloy
80-T-39-0230 Treatment ofDamage on
Components Made ofAluminium-Alloy
Yes QUALIFIED 26/03/2015 00:00:00 NONE 26/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 03 Installation,Manufacture,Fabrication
03 Fabrication,bearings, swaging
Rework of scratchesin Aluminium alloyson external surfaces
AIPS03-03-001 Rework of scratchesin Aluminium alloyson external surfaces
5 AIPI03-03-001 Rework of scratchesin aluminium and
aluminium alloys onexternal surfaces
2 Yes QUALIFIED 10/06/2013 00:00:00 NONE 900.00 2800.00 1500.00 10/06/2013 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 04 Heat Treatment 01 Heat treatment ofaluminium alloys
Heat treatment ofaluminium alloy parts
80-T-36-1010 Heat Treatment ofAluminium
80-T-36-1010 Heat Treatment ofAluminium
Yes QUALIFIED 26/03/2015 00:00:00 NONE 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 04 Heat Treatment 01 Heat treatment ofaluminium alloys
Heat treatment ofaluminium alloy parts
ABP3-1119 HEAT TREATMENTOF ALUMINIUM
9 ABP3-1119 HEAT TREATMENTOF ALUMINIUM
9 Yes QUALIFIED 30/11/2009 00:00:00 NONE 1.00 0.01 1.00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 04 Heat Treatment 01 Heat treatment ofaluminium alloys
Heat treatment ofaluminium alloy parts
ABP3-1120 REFRIGERATEDSTORAGE OF
ALUMINIUM AFTERHEAT TREATMENT
1-3 ABP3-1120 REFRIGERATEDSTORAGE OF
ALUMINIUM AFTERHEAT TREATMENT
1-3 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 04 Heat Treatment 01 Heat treatment ofaluminium alloys
Heat treatment ofaluminium alloy parts
AIPS04-01-001 Heat treatment ofaluminium alloys
parts
4 AIPI04-01-001 Heat Treatment ofAluminium Alloy
Parts
A3 Yes QUALIFIED 18/09/2017 14:51:30 10/06/2013 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 04 Heat Treatment 01 Heat treatment ofaluminium alloys
Heat treatment ofsolid rivets
ABP3-1118 HEAT TREATMENTOF RIVETS PRIOR
TO RIVETING
2 ABP3-1118 HEAT TREATMENTOF RIVETS PRIOR
TO RIVETING
2 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
01 Primer Application of basicprimer
ABP4-1123 APPLICATION OFCORROSION
INHIBITING PRIMERTO AN INTERNAL
OR EXTERNALSURFACE
22 ABP4-1123 APPLICATION OFCORROSION
INHIBITING PRIMERTO AN INTERNAL
OR EXTERNALSURFACE
22 Yes QUALIFIED 28/09/2012 00:00:00 NONE 28/09/2012 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Application of anti-static paints oncomposite parts
80-T-35-9120 Coating with Paintsand Varnishes,
General
80-T-35-9120 Coating with Paintsand Varnishes,
General
Yes QUALIFIED 26/03/2015 00:00:00 NONE 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Application ofexternal paint
systems
80-T-35-5218 Application of ElasticProtective Coatings
80-T-35-5218 Application of ElasticProtective Coatings
Yes QUALIFIED 26/03/2015 00:00:00 NONE 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Application ofexternal paint
systems
ABP4-2126 APPLICATION OFPOLYURETHANE
FINISH PAINTS TOAN INTERNAL OR
EXTERNALSURFACE
6 ABP4-2126 APPLICATION OFPOLYURETHANE
FINISH PAINTS TOAN INTERNAL OR
EXTERNALSURFACE
6 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Application ofexternal paint
systems
ABP4-2127 APPLICATION OFFLEXIBLE FINISHPAINT SCHEME
INCORPORATING ACHROMATED
PRIMER TO ANEXTERNALSURFACE
18 ABP4-2127 APPLICATION OFFLEXIBLE FINISHPAINT SCHEME
INCORPORATING ACHROMATED
PRIMER TO ANEXTERNALSURFACE
18 Yes QUALIFIED 30/11/2009 00:00:00 NONE 1000.00 1200.00 300.00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Application ofexternal paint
systems
ABP4-2128 APPLICATION OFPOLYURETHANE
PAINTS ANDVARNISHES FOR
OVERCOATING OFSEALANTS AND
PART MARKINGSAND FOR
IDENTIFICATIONPURPOSES
10 ABP4-2128 APPLICATION OFPOLYURETHANE
PAINTS ANDVARNISHES FOR
OVERCOATING OFSEALANTS AND
PART MARKINGSAND FOR
IDENTIFICATIONPURPOSES
10 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Application ofexternal paint
systems
AIPS05-02-003 Application ofexternal paint
systems
5 ABP4-2126 APPLICATION OFPOLYURETHANE
FINISH PAINTS TOAN INTERNAL OR
EXTERNALSURFACE
6 Yes AIPS/AITMCOMPLIANT WITH
LEGACYQUALIFICATION
30/11/2009 00:00:00 ABP4-2126 SCOPE& LIMITATIONS(REMARKS) INACCORDANCE
WITH AIPS00-00-006 TABLE 4.1
30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Application ofexternal paint
systems
AIPS05-02-003 Application ofexternal paint
systems
5 ABP4-2127 APPLICATION OFFLEXIBLE FINISHPAINT SCHEME
INCORPORATING ACHROMATED
PRIMER TO ANEXTERNALSURFACE
18 Yes AIPS/AITMCOMPLIANT WITH
LEGACYQUALIFICATION
30/11/2009 00:00:00 ABP4-2127 SCOPE& LIMITATIONS(REMARKS) INACCORDANCE
WITH AIPS00-00-006 TABLE 4.1
30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Application ofexternal paint
systems
AIPS05-02-003 Application ofexternal paint
systems
5 ABP4-2128 APPLICATION OFPOLYURETHANE
PAINTS ANDVARNISHES FOR
OVERCOATING OFSEALANTS AND
PART MARKINGSAND FOR
IDENTIFICATIONPURPOSES
10 Yes AIPS/AITMCOMPLIANT WITH
LEGACYQUALIFICATION
30/11/2009 00:00:00 ABP4-2128 SCOPE& LIMITATIONS(REMARKS) INACCORDANCE
WITH AIPS00-00-006 TABLE 4.1
30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Application ofstructural paints
80-T-35-5030 Coating withTwoThree-
component Water-based Primer
80-T-35-5030 Coating withTwoThree-
component Water-based Primer
Yes QUALIFIED 26/03/2015 00:00:00 NONE 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Application ofstructural paints
80-T-35-5130 Coating withTwoThree-
component Water-based Top Coat
80-T-35-5130 Coating withTwoThree-
component Water-based Top Coat
Yes QUALIFIED 26/03/2015 00:00:00 NONE 500.00 230.00 120.00 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Application ofstructural paints
ABP4-2130 APPLICATION OFFLEXIBLE FINISH
PAINT TO ANINTERNALSURFACE
16 ABP4-2130 APPLICATION OFFLEXIBLE FINISH
PAINT TO ANINTERNALSURFACE
16 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
External Report Created On
Airbus SAS, 2015. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of Airbus SAS. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of Airbus SAS. This document and its content shall not be used for any purpose other than that for which it is supplied.
04 Dec 2017 11:06
6/712
External Shop Process Family Process Specification(PS) / Process Instruction (PI) Couple qualification Status Only for NDT EQUIPMENT SIZES
ARP-ID Company Name Street City ZIP-Code Country Specialist Family Sub Family Process Ref. No. (PS) Title (PS) PS Current Version Ref. No. (PI) Title (PI) PI Current Version Special Process Status Expiry Date Date of last statusupdate
Limitations QCS Ref. Number QCS Title QCSMaterial/shape/thickn
ess scope
Max Width (cm): Max Length (cm): Max Height (cm): First ATP orQualification date
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Application ofstructural paints
AIPS05-02-009 Application ofstructural paints
4 AIPI05-02-009 APPLICATION OFSTRUCTURAL
PAINTS
A2 Yes QUALIFIED 10/06/2013 00:00:00 NONE 10/06/2013 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
02 Paints, coatings Rework of paints onmetallic and
nonmetallic structuralparts
AIPS05-02-011 Rework of paints onmetallic and non-metallic structural
parts
4 AIPI05-02-011 Rework of paints onmetallic and non-metallic structural
parts
2 Yes QUALIFIED 10/06/2013 00:00:00 NONE 10/06/2013 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
04 Filler Application of gapfiller - easy to remove
80-T-34-9600 Application ofSealing Compounds
80-T-34-9600 Application ofSealing Compounds
Yes QUALIFIED 26/03/2015 00:00:00 NONE 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05 Sealant Application of lowadhesion sealants
ABP4-5142 APPLICATION OFSEALANT FOR
GENERALAIRCRAFT
STRUCTURE
16 ABP4-5142 APPLICATION OFSEALANT FOR
GENERALAIRCRAFT
STRUCTURE
16 Yes QUALIFIED 30/11/2009 00:00:00 NONE 1200.00 2500.00 800.00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05 Sealant Application of nonhardening jointing
compounds
80-T-35-5903 Assembly withDuroplastic Anti-
corrosive Compound,Zink Chromate
Based
80-T-35-5903 Assembly withDuroplastic Anti-
corrosive Compound,Zink Chromate
Based
Yes QUALIFIED 26/03/2015 00:00:00 NONE 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05 Sealant Application of nonhardening jointing
compounds
ABP4-5144 APPLICATION OFNON-HARDENING
JOINTINGCOMPOUNDS AS
SEALANT
5 ABP4-5144 APPLICATION OFNON-HARDENING
JOINTINGCOMPOUNDS AS
SEALANT
5 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05 Sealant Process for themanufature of form-in-place seals using
sealants
ABP6-4221 MANUFACTURE OFFORM-IN-PLACE
SEALS USINGSEALANT
4 ABP6-4221 MANUFACTURE OFFORM-IN-PLACE
SEALS USINGSEALANT
4 Yes QUALIFIED 08/12/2015 00:00:00 NONE 07/12/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05 Sealant Sealing of aircraftstructure
AIPS05-05-001 Sealing of aircraftstructure
5 AIPI05-05-001 SEALING OFAIRCRAFT
STRUCTURE
A3 Yes QUALIFIED WITHLIMITATIONS
14/04/2017 16:18:06 No qualification forfreezing and
defreezing process.
10/06/2013 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05 Sealant Surface protection offasteners andsealants by
application of varnish
AIPS05-05-003 Surface protection offasteners andsealants by
application of varnish
3 AIPI05-05-003 Surface protection offasteners andsealants by
application of varnish
A4 Yes QUALIFIED 14/04/2017 16:19:26 10/06/2013 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05 Sealant Wet installation offasteners
80-T-34-5803 Wet Installation ofFasteners
80-T-34-5803 Wet Installation ofFasteners
Yes QUALIFIED 26/03/2015 00:00:00 NONE 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant
05 Sealant Wet installation offasteners
AIPS05-05-004 Wet installation offasteners
6 AIPI05-05-004 Wet installation offasteners
A4 Yes QUALIFIED WITHLIMITATIONS
14/04/2017 16:20:49 No qualification forfreezing and
defreezing process.
10/06/2013 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 06 Bonding 01 Pre-treatment Etching offluorpolymer
adherends prior toadhesive bonding
ABP5-1148 PREPARATION OFPTFE FORADHESIVEBONDING
1 ABP5-1148 PREPARATION OFPTFE FORADHESIVEBONDING
1 Yes QUALIFIED 30/11/2009 00:00:00 NONE 600.00 2700.00 750.00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 06 Bonding 01 Pre-treatment Mechanical surfacepreparation of non-structural adherend
prior to adhesivebonding
AIPS06-01-004 Mechanical surfacepreparation of non-structural adherend
prior to adhesivebonding
2 AIPI06-01-004 MECHANICALSURFACE
PREPARATION OFNON-STRUCTURALADHEREND PRIOR
TO ADHESIVEBONDING
A2 Yes QUALIFIED 23/10/2017 14:19:34 15/09/2017 11:36:30
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 06 Bonding 02 Manufacture Bonding metalmetalparts Structural
Bonding Process
ABP5-1146 PREPARATION OFMETALLIC
MATERIALS FORADHESIVEBONDING
1 ABP5-1146 PREPARATION OFMETALLIC
MATERIALS FORADHESIVEBONDING
1 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 06 Bonding 02 Manufacture Non-structuralAdhesive bonding.
80-T-34-9032 Bonding of Non-structural
Connections
80-T-34-9032 Bonding of Non-structural
Connections
Yes QUALIFIED 26/03/2015 00:00:00 NONE 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 06 Bonding 02 Manufacture Non-structuralAdhesive bonding.
ABP5-1147 PREPARATION OFRUBBER FOR
ADHESIVEBONDING
1 ABP5-1147 PREPARATION OFRUBBER FOR
ADHESIVEBONDING
1 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 06 Bonding 02 Manufacture Non-structuralAdhesive bonding.
ABP5-1149 ADHESIVEBONDING WITH
TWO PART EPOXY.HYSOL AND 3M
4 ABP5-1149 ADHESIVEBONDING WITH
TWO PART EPOXY.HYSOL AND 3M
4 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 06 Bonding 02 Manufacture Non-structuralAdhesive bonding.
ABP5-1152 ADHESIVEBONDING USING
SEALANT
3 ABP5-1152 ADHESIVEBONDING USING
SEALANT
3 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 06 Bonding 02 Manufacture Non-structuralAdhesive bonding.
ABP5-1153 ADHESIVEBONDING OF
SILICONE RUBBERWITH SILICONE
ADHESIVE
4 ABP5-1153 ADHESIVEBONDING OF
SILICONE RUBBERWITH SILICONE
ADHESIVE
4 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 06 Bonding 02 Manufacture Non-structuralAdhesive bonding.
ABP5-1155 ADHESIVEBONDING WITH
TWO PARTNEOPRENE
BOSTIK 2402
1 ABP5-1155 ADHESIVEBONDING WITH
TWO PARTNEOPRENE
BOSTIK 2402
1 Yes QUALIFIED 30/11/2009 00:00:00 NONE 2000.00 6500.00 1000.00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 06 Bonding 02 Manufacture Non-structuralAdhesive bonding.
ABP5-1158 ADHESIVEBONDING WITH
TWO PART EPOXYARALDITE
4 ABP5-1158 ADHESIVEBONDING WITH
TWO PART EPOXYARALDITE
4 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 06 Bonding 02 Manufacture Non-structuralAdhesive bonding.
ABP5-1160 ADHESIVEBONDING WITH
TWO PART EPOXYREDUX 410NA
1 ABP5-1160 ADHESIVEBONDING WITH
TWO PART EPOXYREDUX 410NA
1 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 06 Bonding 02 Manufacture Non-structuralAdhesive bonding.
AIPS06-02-002 Non-structuraladhesive bonding
4 AIPI06-02-002 NON STRUCTURALADHESIVEBONDING
A2 Yes QUALIFIED 18/09/2017 14:45:05 10/06/2013 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 07 Electrical 01 Assembly Electrical bonding 80-T-40-3312 Electrical bonding 80-T-40-3312 Electrical bonding Yes QUALIFIED 26/03/2015 00:00:00 NONE 500.00 230.00 120.00 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 07 Electrical 01 Assembly Electrical bonding ABP7-1245 ELECTRICALBONDING ANDEARTHING FOR
AIRBUSREQUIREMENTS
DURINGASSEMBLY
8 ABP7-1245 ELECTRICALBONDING ANDEARTHING FOR
AIRBUSREQUIREMENTS
DURINGASSEMBLY
8 Yes QUALIFIED WITHLIMITATIONS
08/12/2015 00:00:00 LIMITED TO PARTSAND PROCESS
REFERENCED INBVTI AFBT 001
ISSUE 3.
08/12/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 07 Electrical 01 Assembly Electrical bonding ABP7-1246 ELECTRICALBONDING ANDEARTHING FOR
AIRBUSREQUIREMENTS
DURINGASSEMBLY
9 ABP7-1246 ELECTRICALBONDING ANDEARTHING FOR
AIRBUSREQUIREMENTS
DURINGASSEMBLY
9 Yes QUALIFIED WITHLIMITATIONS
09/12/2015 00:00:00 LIMITED TO PARTSAND PROCESS
REFERENCED INBVTI AFBT 001
ISSUE 3.
09/12/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A 07 Electrical 01 Assembly Electrical bonding AIPS07-01-006 Electrical bonding 8 AIPI07-01-006 Electrical Bonding A9 Yes QUALIFIED WITHLIMITATIONS
28/01/2014 00:00:00 LIMITED TO CLASS2 AND 3 PARTS
2000.00 3650.00 900.00 28/01/2014 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A Non DestructiveTesting
Conductivity Inspection forconfirmation of
anodising process
AITM6-9004 Inspection forconfirmation of theanodising process
based uponmeasurement of
surface resistance
2 AITM6-9004 Inspection forconfirmation of theanodising process
based uponmeasurement of
surface resistance
2 Yes QUALIFIED 17/06/2016 12:06:05
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A Non DestructiveTesting
Direct Reading Measure ResistanceOf Electrical Bonding
Points
AITM6-9008 Electrical bondingMeasure resistanceof electrical bonding
points
4 NA Yes QUALIFIED WITHLIMITATIONS
04/04/2014 00:00:00 LIMITED TOMETHOD 2
04/04/2014 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A Non DestructiveTesting
Measurement Coating thicknessmeasurement
AITM6-6006 Measuring coatingthickness by
equipments of themagnetic and eddy
current type
3 NA Yes QUALIFIED 04/04/2017 12:09:59 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A Non DestructiveTesting
Measurement Determination ofelectrical conductivityof non-ferromagnetic
materials
ABP6-5224 TESTING OFALUMINIUMALLOYS BY
ELECTRICALCONDUCTIVITY
4 ABP6-5224 TESTING OFALUMINIUMALLOYS BY
ELECTRICALCONDUCTIVITY
4 Yes QUALIFIED 30/11/2009 00:00:00 NONE UK UK 895.00 1796.00 1200.00 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A Non DestructiveTesting
Measurement Determination ofelectrical conductivityof non-ferromagnetic
materials
AITM6-6004 For InspectionProcesses
Determination ofelectrical conductivityof aluminium alloys
by Eddy currentmethod
3 NA Yes QUALIFIED 04/04/2017 12:19:19 25/03/2015 00:00:00
External Report Created On
Airbus SAS, 2015. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of Airbus SAS. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of Airbus SAS. This document and its content shall not be used for any purpose other than that for which it is supplied.
04 Dec 2017 11:06
7/712
External Shop Process Family Process Specification(PS) / Process Instruction (PI) Couple qualification Status Only for NDT EQUIPMENT SIZES
ARP-ID Company Name Street City ZIP-Code Country Specialist Family Sub Family Process Ref. No. (PS) Title (PS) PS Current Version Ref. No. (PI) Title (PI) PI Current Version Special Process Status Expiry Date Date of last statusupdate
Limitations QCS Ref. Number QCS Title QCSMaterial/shape/thickn
ess scope
Max Width (cm): Max Length (cm): Max Height (cm): First ATP orQualification date
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A Non DestructiveTesting
Penetrant Penetrant testing ABP6-5230 TESTING BYPENETRANT FLAW
DETECTION
12 ABP6-5230 TESTING BYPENETRANT FLAW
DETECTION
12 Yes QUALIFIED WITHLIMITATIONS
23/08/2017 15:57:19 sensitivity 2penetrant and
aluminium 2000,6000, 7000 series
(when etching step isperformed)
09/08/2017 11:51:38
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A Non DestructiveTesting
Penetrant Penetrant testing AITM6-1001 Penetrant Testing 11 AITM6-1001 Penetrant Testing 10 Yes QUALIFIED WITHLIMITATIONS
23/08/2017 15:51:48 sensitivity 2penetrant and
aluminium 2000,6000, 7000 series
(when etching step isperformed)
07/07/2017 11:40:42
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A TBD TBD APPLICATION OFHIGH
TEMPERATURESTOVE ENAMEL
PAINT TO STEELS
ABP4-2131 APPLICATION OFHIGH
TEMPERATURESTOVE ENAMEL
PAINT TO STEELS
3 ABP4-2131 APPLICATION OFHIGH
TEMPERATURESTOVE ENAMEL
PAINT TO STEELS
3 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A TBD TBD Installation of AnchorNuts
80-T-34-3000 Installation of AnchorNuts
80-T-34-3000 Installation of AnchorNuts
Yes QUALIFIED 04/04/2017 12:20:56 25/03/2015 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United Kingdom N/A TBD TBD MILLING THEHEADS OF RIVETSAFTER RIVETING
ABP2-1071 MILLING THEHEADS OF RIVETSAFTER RIVETING
1 ABP2-1071 MILLING THEHEADS OF RIVETSAFTER RIVETING
1 Yes QUALIFIED 30/11/2009 00:00:00 NONE 30/11/2009 00:00:00
134705 AEROFABRICATIONS
COMMON LANE WATNALL NG16 1HA United K