1
www.LMCTRUCK.com Order Your Parts & Catalogs Online (800) 562-8782 25 38-3068 Stepside Shortbed Tonneau Cover … Velcro for Easy Installation and Removal Durable and easy to use, Tonneau Cover is installed over the truck's bed using Velcro. The Velcro covers the full truck bed's perimeter. No drilling required. The "loop" is sewn to the Tonneau and the Velcro attaches to the bed with extra strong peel-and-stick adhesive. Tonneau is designed to fit around and under the rolled sides and comes with a small tab at the back corners to seal the gap between the high outside edge and low rear gate. 38-3028 Tonneau Covers Save Gas and Protect Your Cargo Tonneau Cover is made from heavy-duty vinyl attached to a black enameled aluminum frame which clamps to the truck's bed. No drilling needed. Frame does not attach to the tailgate so it can be opened as needed. Vinyl cover comes with a 10-year warranty and the frame has a lifetime warranty. Smooth, aerodynamic profile improves gas mileage by as much as 10%. * After the sell price means Oversize Part Charge. Your order will incur a charge of $20.00 for each oversized part. Due to packing and/or transportation requirements, please allow additional time for delivery. Oversized Parts are not available for air delivery. Tonneau Covers feature special reversible snaps, which allows adjustable tension to compensate for weather conditions. Position the snap stud low for a tight fit in hot weather or reverse the snap stud to high for looser fit in cold weather. Corners and snaps are backed with thick polymer. Strong and durable fiberglass reinforced nylon snaps will not break. The large, adjustable bows help keep rain and snow out and are easily removed and reinstalled when hauling bulky items. Locking corners allow easy removal of the tail rail to haul longer loads. Hinged Tonneau Cover design enables full access to the bed without unsnapping the entire cover. Simply unlock the polymer covered locking handles and lift the tonneau cover. Aluminum frame features stainless steel and brass snaps and locking corners allowing easy removal. The quick release front hinge makes removal of the entire cover and frame easy; or if the frame cannot be left, roll up the vinyl cover and secure with the convenient straps, then remove the bows and tail rail to haul that bulky load. PART DESCRIPTION APPLICATION REQD PRICE Standard 38-3034 TONNEAU COVER SHORTBED FLEETSIDE 60-66 (1) $269.95* 38-3038 TONNEAU COVER LONGBED FLEETSIDE 60-66 (1) $299.95* Hinged 38-3069 HINGED TONNEAU COVER SHORTBED FLEETSIDE 60-66 (1) $429.95* 38-3084 HINGED TONNEAU COVER LONGBED FLEETSIDE 60-66 (1) $479.95* 38-3068 REPLACEMENT LIFT SUPPORT         (2) $19.95 PART DESCRIPTION APPLICATION REQD PRICE 38-3019 VELCRO TONNEAU-BLACK SHORTBED STEPSIDE 60-66 (1) $199.95 38-3028 REPLACEMENT VELCRO KIT-BED RAIL         (1) $26.95 Chrome Outside Door Handle Set and Door Lock Cylinders 1960-66 Chevy & GMC Truck Note: "A" Original push buttons cannot be used with this door handle set. 38-6001 36-0694 36-0689 Includes one set of keys for the ignition & door locks and a different set of keys for the glove box lock. Matched Lock Set 1960-66 Chevy & GMC Truck 36-0864 Door, Ignition and Glove Box Locks PART DESCRIPTION APPLICATION REQD PRICE 38-6001 CHROME DOOR HANDLE SET "A" CHEVY GMC 60-66 (1) $39.95 36-0694 DOOR LOCK CYLINDER-1 DOOR CHEVY GMC 60-66 (1) $29.95 36-0689 DOOR LOCK CYLINDER SET-2 DOOR CHEVY GMC 60-66 (1) $54.95 PART DESCRIPTION PRICE 36-0864 MATCHED LOCK SET $84.95 EXTERIOR ACCESSORIES

EXTERIOR ACCESSORIES 25Tonneau Covers Save Gas and Protect Your Cargo Tonneau Cover is made from heavy-duty vinyl attached to a black enameled aluminum frame which clamps to the truck's

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: EXTERIOR ACCESSORIES 25Tonneau Covers Save Gas and Protect Your Cargo Tonneau Cover is made from heavy-duty vinyl attached to a black enameled aluminum frame which clamps to the truck's

www.LMCTRUCK.comOrder Your Parts & Catalogs Online (800) 562-8782

25

38-3068

Stepside Shortbed Tonneau Cover … Velcro for Easy Installation and Removal

Durable and easy to use, Tonneau Cover is installed over the truck's bed using Velcro. The Velcro covers the full truck bed's perimeter. No drilling required. The "loop" is sewn to the Tonneau and the Velcro attaches to the bed with extra strong peel-and-stick adhesive.

Tonneau is designed to fit around and under the rolled sides and comes with a small tab at the back corners to seal the gap between the high outside edge and low rear gate.

38-3028

Tonneau Covers Save Gas and Protect Your Cargo

Tonneau Cover is made from heavy-duty vinyl attached to a black enameled aluminum frame which clamps to the truck's bed. No drilling needed. Frame does not attach to the tailgate so it can be opened as needed. Vinyl cover comes with a 10-year warranty and the frame has a lifetime warranty. Smooth, aerodynamic profile improves gas mileage by as much as 10%.

* After the sell price means Oversize Part Charge. Your order will incur a charge of $20.00 for each oversized part. Due to packing and/or transportation requirements, please allow additional time for delivery. Oversized Parts are not available for air delivery.

Tonneau Covers feature special reversible snaps, which allows adjustable tension to compensate for weather conditions. Position the snap stud low for a tight fit in hot weather or reverse the snap stud to high for looser fit in cold weather. Corners and snaps are backed with thick polymer. Strong and durable fiberglass reinforced nylon snaps will not break.

The large, adjustable bows help keep rain and snow out and are easily removed and reinstalled when hauling bulky items. Locking corners allow easy removal of the tail rail to haul longer loads.

Hinged Tonneau Cover design enables full access to the bed without unsnapping the entire cover. Simply unlock the polymer covered locking handles and lift the tonneau cover. Aluminum frame features stainless steel and brass snaps and locking corners allowing easy removal. The quick release front hinge makes removal of the entire cover and frame easy; or if the frame cannot be left, roll up the vinyl cover and secure with the convenient straps, then remove the bows and tail rail to haul that bulky load.

PART DESCRIPTION APPLICATION REQD PRICE

Standard38-3034 TONNEAU COVER SHORTBED FLEETSIDE 60-66 (1) $269.95*

38-3038 TONNEAU COVER LONGBED FLEETSIDE 60-66 (1) $299.95*

Hinged38-3069 HINGED TONNEAU COVER SHORTBED FLEETSIDE 60-66 (1) $429.95*

38-3084 HINGED TONNEAU COVER LONGBED FLEETSIDE 60-66 (1) $479.95*

38-3068 REPLACEMENT LIFT SUPPORT                 (2) $19.95

PART DESCRIPTION APPLICATION REQD PRICE

38-3019 VELCRO TONNEAU-BLACK SHORTBED STEPSIDE 60-66 (1) $199.95

38-3028 REPLACEMENT VELCRO KIT-BED RAIL                 (1) $26.95

Chrome Outside Door Handle Set

and Door Lock Cylinders1960-66 Chevy & GMC Truck

Note: "A" Original push buttons cannot be used with this door handle set.

38-6001 36-0694

36-0689

Includes one set of keys for the ignition & door locks and a different set of keys for the glove box lock.

Matched Lock Set1960-66 Chevy & GMC Truck

36-0864

Door, Ignition and Glove Box Locks

PART DESCRIPTION APPLICATION REQD PRICE

38-6001 CHROME DOOR HANDLE SET "A" CHEVY GMC 60-66 (1) $39.95

36-0694 DOOR LOCK CYLINDER-1 DOOR CHEVY GMC 60-66 (1) $29.95

36-0689 DOOR LOCK CYLINDER SET-2 DOOR CHEVY GMC 60-66 (1) $54.95

PART DESCRIPTION PRICE

36-0864 MATCHED LOCK SET $84.95

EXTERIOR ACCESSORIES