Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Volume 1
Standard Components for Press Dies
Standard Components for Press D
ies 2011 Volume 1
MISUMI World Network
International SupportMISUMI Corporation Press Die Components Team TEL: 81-3-3647-7114 FAX: 81-3-3647-7030
MISUMI USA, INC.
MISUMI UK LTD.
MISUMI EUROPA GmbH
MISUMI(THAILAND) CO., LTD.
MISUMI KOREA CORP.
MISUMI TAIWAN CORP.
SHANGHAI MISUMIPRECISION MACHNERY CO., LTD.
MISUMI E.A. HK LTD.
MISUMI SOUTH EAST ASIA PTE.LTD.
MISUMI MALAYSIA SDN. BHD.
TEL: 1-847-843-9105
TEL: 44-1784-465530
TEL: 49-0-700-9994-1670
TEL: 66-38-959-200
TEL: 82-2-551-3611
TEL: 886-2-2570-3766
TEL: 86-21-6391-7080
TEL: 852-2375-4550
TEL: 65-6733-7211
TEL: 603-7960-8499
FAX: 1-847-843-9107
FAX: 44-1784-466695
FAX: 49-0-700-9994-3600
FAX: 66-38-959-202
FAX: 82-551-4811
FAX: 886-2-2570-3767
FAX: 86-21-6391-7085
FAX: 852-2302-4589
FAX: 65-6733-0211
FAX: 603-7960-7499
MISUMI Corporation4-43, Toyo 2-chome, Koto-ku,Tokyo 135-8458 JapanTel: +81-3-3647-7111 Fax: +81-3-3647-6241http://jp.misumi-ec.com/
MISUMI USA, INC.1717 Penny Lane, Suite 200, Schaumburg,Illinois 60173 USATel: +1-847-843-9105 Fax: +1-847-843-9107http://us.misumi-ec.com/Customer Service: [email protected] Inquiries: [email protected]
MISUMI KOREA CORP.3804 World Trade Center 159-1,Samsung-dong, Kangnam-gu, Seoul,135-729, KoreaTel: +82-2-551-3611 Fax: +82-2-551-4811http://kr.misumi-ec.com/[email protected]
MISUMI EUROPA GmbHKatharina-Paulus-Strasse 6, 65824 Schwalbach,GermanyTel: +49-6196-7746-0 Fax: +49-6196-7746-360http://[email protected]. OfficeTel: +44-20-3051-4809Rappresentanza Italiana OfficeTel: +39-02-6203-2225
MISUMI E.A.HK LTD.香港三住有限公司3/F., Malaysia Building, 50 Gloucester Road,Wanchai, Hong KongTel: +852-8303-2781 Fax: +852-8303-2782
MISUMI (CHINA) PRECISIONMACHINERY TRADING CO., LTD.米思米 (中国) 精密机械貿易有限公司16th Floor, Jinling Hai Xin Bldg,No666 Fuzhou Rd., Shanghai 200001 P.R. ChinaTel: +86-21-6391-7080 Fax: +86-21-6391-7085Shanghai: http://cn.misumi-ec.com/Guangzhou: http://cn2.misumi-ec.com/[email protected] OfficeTel: +86-20-8527-1038 Fax: +86-20-8527-1686Tianjin OfficeTel: +86-22-2302-9228 Fax: +86-22-2302-9350Wuxi OfficeTel: +86-510-8521-7176, +86-510-8521-9793Fax: +86-510-8521-9651Shenzhen OfficeTel: +86-755-8287-2420 Fax: +86-755-8287-2096Ningbo OfficeTel: +86-574-8706-6835 Fax: +86-574-8706-6839
Gurgaon OfficeTel: +0124-424-1662Chennai OfficeTel: +91-20-6647-0000 Fax: +91-20-6647-0000
MISUMI INDIA Pvt. Ltd.3rd Floor, ONYX Building, North Main Road,Koregaon Park, Pune -411001 Maharashtra, IndiaTel: +91-20-6647-0000 Fax: +91-20-6647-0050http://[email protected]
MISUMI (THAILAND) CO., LTD.300/24 Moo 1, Eastern SeaboardIndustrial Estate Soi 5, Tambol Tasith,Amphur Pluakdaeng, Rayong Province 21140, ThailandTel: +66-38-959-200 Fax: +66-38-959-202http://[email protected]
MISUMI TAIWAN CORP.台灣三住股份有限公司9F-1,No.126, Nanjing East Road Sec.4,Taipei 10595 Taiwan R.O.C.Tel: +886-2-2570-3766 Fax: +886-2-2570-3767http://tw.misumi-ec.com/[email protected]
MISUMI SOUTH EAST ASIA PTE. LTD.331 North Bridge Road, #05-03, Odeon Towers,Singapore 188720Tel: +65-6733-7211 Fax: +65-6733-0211http://sg.misumi-ec.com/[email protected]
Representative Vietnam Office (Ho Chi Minh)Tel: +84-8-5-4499555 Fax: +84-8-5-4499559
MISUMI MALAYSIA SDN BHDUnit 1206, 12th Floor Menara Amcorp No.18, Jalan Persiaran Barat 46050 Petaling Jaya, Selangor, MalaysiaTel : +603-7960-8499 Fax : +603-7960-7499http://my.misumi-ec.com/[email protected]
Extensive Range of ProductsIncrease in Stocks Sizes & Varieties
SGP StockSGP Stock
ComponentsCODE: MSB MSW MS SRW T FGSM WSS HX HXH MGN etc. P.51, 81~94
PRESS DIES STANDARD COMPONENTSWIDE RANGE of TOP QUALITY
Additional 300 Stock Items Total 2400 Items in Stock now
Stripper Guide Pins & BushingsCODE: SGOH SGPH SGON SGPN VGPH VGHZ SGBH SGBL SGBT SGBA SGBF SGHZ SGBZ SGFZ SGHM SGBBF SGBBS etc. P.1~26
Guide PostsCODE: BRPM BSPK BSPM MRP MSP etc. P.39~42
Guide BushingsCODE: LBB RBB LBBS LDB LDBZ MBS etc. P.43~50
Holder Guide Post SetsCODE: MYP MY MYZ MYZP N-MYP N-MYZP MYA MYAP MYJ MYJP MYAK etc. P.55~64
Guide Posts SetsCODE: QM RM RD PD QBSH RMSH etc. P.31~38
Punches & Pilot PunchesCODE: SPAL SJAL SPAL-C SPC SHB SPB SPT etc. P.65~76
Button DiesCODE: EMHD EMSD P.77~80
Guide Lifters / Lifter Pin SetsCODE: GLH GLK GLP GLS LPS LPSH etc. P.95~98
RGRGRW T FGSGSMMGN etc. SGP StockSGP Stock
eM
e
tteM
e
etsMYZP N-MYP MYAP MYJ
etc. SGP StockSGP Stock
Delivery Shorten!
Visit www.my.misumi-ec.com (MISUMI MALAYSIA) or www.sg.misumi-ec.com (MISUMI SOUTH EAST ASIA)*Warehouse is located in Singapore.
Product information are also available on our website.
SpringsCODE: WY WR WF WL WT WM WH SWY SWU SWR SWS SWF SWL SWM SWH SWB SWG SGC P. 99~128
SGP StockSGP Stock
COMPONENTS
HIGHLIGHT
highlight page_last_press.ai 6/7/2011 1:24:10 PM
Standard Components for Press Dies Product Lineup
P.65~PUNCHES PUNCH GUIDE BUSHINGS
P.75~PILOT PUNCHES
P.77~BUTTON DIES BLOCK PUNCHES BLOCK DIES
PRECISION PUNCHES & DIES CARBIDE PUNCHES CARBIDE PILOT PUNCHES
CARBIDE BUTTON DIES CARBIDE BLOCK PUNCHES CARBIDE BLOCK DIES
RELATED COMPONENTS FOR MISFEED SENSORS PUNCHES & DIES FOR FORMING SPECIAL SHAPED PUNCHES & DIES
RETAINERS BALL-LOCK PUNCHES & DIES/RETAINERSP.81~
COMPONENTS
P.1~STRIPPER GUIDE PINS & BUSHINGS
P.95~GUIDE LIFTERS
P.27~GUIDE POSTS & BUSHINGS FOR DIE SET
GUIDING COMPONENTS FOR AUTOMOBILE DIE COMPONENTS FOR AUTOMOBILE DIEP.53~
HOLDER GUIDE POST SETS
COMPONENTS FOR TRANSFER DIELOCATING COMPONENTS FOR AUTOMOBILE DIE OIL-FREE SLIDE PLATES
P.99~COIL SPRINGSCOMPONENTS OF CAMS GAS SPRINGS
COMPONENTS FOR LIFTING/DIE STORINGURETHANE SPRINGS FINISHED PLATES·FINISHED BLOCKS
JIGS & FIXTURES SERIES FOR INSPECTION
Cover 2_page 00 Press.ai 6/3/2011 6:38:39 PM
How to Start Business with MiSUMi
How to Order
For New Customers
Fill out the Customer Registration Form and send it to the Customer Service Department either by fax or e-mail. You
will receive your customer code once the registration procedure is completed.
For Existing Customers
1. Send in your inquiry with the details of your order (Misumi part no. & Quantity) together with your company details
to our Customer Service by fax or e-mail.
2. Our Customer Service will send you the quotation.
3. After confirmation of the price and delivery date, please send in the Official PO.
*For customers without credit terms, payment is to be made after PO confirmation.
Time of delivery stipulated in catalog might delay in case of stock shortage and/or required
Order received after 3pm will be treated as next working day order.
Warehouse is located at Tuas, Singapore.
Delivery
Singapore Malaysia Other Countries Destination
Non-stock Delivery as shownon each page
Stock 1 day + 2 days
Depends on yourcourier service
Changing or Canceling Orders
Changing or canceling orders (the Cancellation) is treated according to the shipment date and the timing when you make the cancellation. Cancellation charges will be imposed in some cases. Pleasecontact our subsidiary in your country for details.
•Items with logo
No cancellation is accepted.
•Items with 4 logo or logo shows longer days
Please refer to the table of the cancellation and shipment date below. Cancellation is acceptable with or without charges
(40% of product cost) depending on the timing of the cancellation.
Please contact our subsidiary in your country for details.
About Express Delivery ServicesThis system shortens the production time so that your order can be shipped out faster.
•To meet your urgent orders, we offer expedited services for many products. Our Express Delivery Services are available for the products marked with one of the symbols below. Depending on the specifi cations / dimensions of a product, the services may not be available. Before placing an order, please confi rm the service availability indicated on the product pages.
Special Emergency Service [Express T]
•[Express T] is a special emergency service that allows orders to be shipped out after 2business days of your order.
•Please note that this service might not be available depending on the order volume.
Reception Time of Emergency Service System [Express]
•Request for Express Services must be received before the following dead line. From 9:00 a.m. to 10:00 a.m. fo [Express T], by 3:00 p.m. for [Express A] and by 5:00 p.m. for [Express B and C]. Please note that orders placed after the above timings will be treated as next day orders.
Express T Express A Express B Express C
Emergency System
Orders Received By 10:00 a.m. By 3:00 p.m. By 5:00 p.m.
Shipped Out After 2 Business Days of Your Order After 3 Business Days of Your Order After 5 Business Days of Your Order After 7 Business Days of Your Order
Express T Express A Express B Express C
12
6
9 3
10AM
PM9
8
6
3
12
PM
12
3
6
9
5
•[Express T] orders must be placed by 10:00 a.m. Please use [Express A] (After 3 Business days of your order) after 10:00 a.m.
• Changes or cancellation after ordering of [Express T] will not be accepted. Changes or cancellation of Express A, B and C varies depending on the time.
•"Shipped out", "Shipment" denotes the required actual business days before the product is shipped.
• Please note that the actual delivery may vary depending on your location. Please consult your local Misumi offi ce for expected arrival dates.
•Table of Cancellation and Shipment date
: Cancellation without charge. : 40% of product cost is imposed on the
cancellation.
: No cancellation is accepted.
Catalogue DeliverySchedule and
ServiceDays from the Day of Ordering
Day of Ordering
1 Days Later
2 Days Later
3 Days Later
5 Days Later
6 Days Later
7 Days Later
8 Days Later
4 Days Later
17 Days Later
13 Days Later
14 Days Later
15 Days Later
16 Days Later
12 Days Later
11 Days Later
10 Days Later
9 Days Later
21 Days Later
20 Days Later
22 Days Later
5 DaysCatalog Item
7 DaysCatalog Item Express CExpress BExpress A
12 DaysCatalog Item
9 DaysCatalog Item
8 DaysCatalog Item
14 DaysCatalog Item
18 DaysCatalog Item
22 DaysCatalog Item
6 DaysCatalog Item
Shipment Date
Shipment Date
Shipment Date
18 Days Later
19 Days Later
3 DaysCatalog Item
Shipment Date
4 DaysCatalog Item
Shipment Date
16 DaysCatalog Item Express T
Shipment Date
Shipment Date
Shipment Date
Shipment Date
Shipment Date
Shipment Date
Shipment Date
Shipment Date
Shipment Date
Shipment Date
Shipment Date
+ 2 days
iii
Returning and Replacing Goods•Item with logo can be returned. Administration charges applicable and customer is kindly request to contact our customer service prior making the return. Please note that the delivery cost of returning goods to the destination we determined must be paid by the customer.•Items with logo or logo shows longer days, cannot be returned as they have been manufactured-to-order.•When the received goods differ from the placed order, please contact our subsidiary for the replacement.
Please note that the above returning and replacing of goods are subjected to terms and conditions.
Please note that above delivery days are subject to change depending on the order volume.
Express Delivery Fee
Kindly contact our customer service for the express delivery charges for your country.
The above conditions only applicable to Singapore area. Please contact our subsidiary in your country for details.
Please note that some of the Punch & Die products are not available for cancellation depending on the manufacturer condition.
Please contact customer service for more information.
how to start business with misumi_press.ai 6/3/2011 6:30:57 PM
SPAS-C 25
Catalog No. (BCCHCCTCEetc.)
BC30LC95 P18.05
R¯0.5
B+0.3
L+0.3
H-
0.2
max35
R10
D-0.01-0.03
SP
(min3)
162025323845
SPAS-CSPAL-C
SPiS-CSPiL-C
SPiX-C
-
10~32FD
FD 10~32
FD 38C45 P.i
Code
BC
SC
WWC
PPC
PPC
0.16
P.i
P.i-C
6M
1(1
5 +0.03+0.01
13
D
1013
TypeCatalog No.
Type
˘6)
+0.0
2+
0.0
4
L(LC) P(PC) W(WC) R
WCPC
Alterations Price
r
0
0
0
¡
¡
¡
rr
S
L
SPAX-C
BC
B
GL
DB H
1013162025323845101316202532
101316202532
3845
50505050(50)
60 70 80 90 100
110 120110 120110 120110 120110 120110 120 130 140 150
130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150130 140 150
5050
(40)(40)(40)(40)(40)(40)(40)
(50)(50)
60 70 80 90 10060 70 80 90 10060 70 80 90 10060 70 80 90 10060 70 80 90 10060 70 80 90 10060 70 80 90 10060 70 80 90 10060 70 80 90 10060 70 80 90 10060 70 80 90 10060 70 80 90 10060 70 80 90 10060 70 80 90 100
110 120110 120
110 120110 120110 120110 120110 120110 120
110 120
3.00~ 9.996.00~12.99
10.00~15.9913.00~19.9918.00~24.9920.00~31.9928.00~37.9935.00~44.99
35.00~44.996.00~ 9.996.00~12.99
10.00~15.9913.00~19.9918.00~24.9920.00~31.99
28.00~37.9920.00~31.9918.00~24.9913.00~19.9910.00~15.99
6.00~12.993.00~ 9.99
9.9712.9715.9719.9724.9731.9737.9744.97
2.503.004.005.006.007.008.009.00
9.9712.9715.97
9.008.007.006.005.004.003.002.50
44.975.009.975.0012.97
37.9731.9724.9719.97
1316
19
23
28
35
41
48
48
41
35
28
23
19
1613
35
28
23
19
1613
13
19
19
25
30
40--
PCWmin.PCKmax.min. P max. R
SPAS-CSPDS-CSPRS-CSPES-CSPGS-C
SPGL-CSPEL-CSPRL-CSPDL-CSPAL-C
Catalog No.
TypeL
120110100120110100120110100120110100120110100120110100120110100
90807090807090809080908090809080
70
60
50(40)
38 41
45 48130 140 150130 140 150
90809080
28.00~37.9912011010035.00~44.99120110100
S
L
D
K
PÚ
0.0
1
WÚ0.01 R¯0.2
PÚ
0.0
1
WÚ0.01
PÚ
0.0
1
WÚ0.01 R
K=
0.010
2D
R¯0.2 Ú0.01WK
Ú0
.01
P
+0.0
1
P
P 2+W 2K=2W
P>WP>WP˘W
0.15¯R<P˘W
m5
(P-2R) +(W-2R)2 +2R2
F0.01 A
0.01/12
0.02 A
A
0
1.6
G
SPAS-C 25
Catalog No.
P18.05100
L P W
X
SPAX-CSPDX-CSPRX-CSPEX-CSPGX-C
X
5
5
5G
RE
DA GR ED
GR ED
A
A
GR EDA
A
GR REDA
PKCWP.
PRC
PCC
GC
PRC Ú0.05
PCC Ú0.05
LCLCL
B
fGC
L
LKC
LKZL
KC
WKC
270B
0B 180B
90B
Code U L
UC40
UC50
37
47
L˘80
L˘90
USN40
USN50
HC
TC
NKC
SRC
NDC
Code
H HC
-0.03D -0.01
Alterations
UC
r
T
TC
UL
D-1
D
GR EDA
TPC
KFC270B
0B 180B
90B
270B
0B 180B
90B
TCC
TCC
GR ED
h
P(PC) B
1.500~1.999
2.000~3.999
4.000~5.999
6.000~
20
35
45
60
max
3025191381.25~1.49
1.50~1.992.00~3.493.50~4.995.00~
P(PC)CW(WC) B max
A D R GE
1F 2F 3F 4F 5F 6F 7F
B
A
AT
AT
PC˘ P2
min ˘PCWC 2
PCWmin
Blade length X:Not applicable
When used with SC, tip and edge are rounded.
P PCWÚ0.01 +0.010
+0.0050
+0.010 e e
+0.05+0.30L 0e
+0.01+0.30L 0e
D>25:Not available
1B increments
Adds 1 key flat at 0Band the other on another angle.
1B increments
Adds 1 key flat at 0Band the other on another angle.
D¯HC<H
0.1mm increments0.5¯TCC (̄H-D)/2
SRC:Not applicable
Adds Chamfering to head.Strengthen the punch head.
˘3 =0r re
D38C45:Not applicable
m5D60~63HRC
MS6-25
For area out of Singapore please refer to P.i.
For area out of Singapore please refer to P.i.
For area out of Singapore please refer to P.i.
Price
Freeof
Charge
Freeof
Charge
7069
PUNCHES WITH DOWEL-FINISHED FOR RETAINERS-
DShank dia.
Shape Blade length With dowel
Blade length(B)X>L>S
R=0:Applicable
0.01mm increments
W 2R
0.15
¯R<
(
on
ly)
L(40), D10~25UB=8, When L(40)and D(10~25), the blade length is fixed to 8 mm.
L(50)UB=13, When L(50), the blade length is fixed to 13mm.
L(40), D32~45UB=6, When L(40)and D(32~45), the blade length is fixed to 6 mm.
PCK>D-0.05Ur=0, When PCK>D-0.05 shaped punch, D (press-in lead)is not available.:
:P>D-0.03Ur=0, When P>D-0.03 round punch, D (press-in lead)is not available.-0.03-0.01
-0.03-0.01GR ED
A
Order
ExampleIPunch with dowel is,
Mainly used for dies of body of automobile with retainer which hold punch. Different from indirect positioning by retainer's dowel hole, it allows direct positioning by the dowel hole coaxially machined to punch, and improves the die precision. It is effective when used for die machining by NC process. It can also be used for dies of exterior panels of electrical appliances by setting with retainer or for attaching to punch plate of progressive die.
R( only)R
Shear anglealteration
Delivery
Alteration
Days
Days
Days Express
Express
Express
Express
Express
Head
Head
Shan
k
Tip
Full
leng
th
2¯BC¯Bmax2¯BC¯Bmax
Changes blade length B.
Full L(LC)
requires BC+30mm or more.
0.1mm increments
0.01mm increments
Changes dimension P.
(Combination with
PKCU0.001mm increments)
0.01mm increments
Changes dimension PCW.
0.1mm increments
Full L(LC)
requires BC+25mm or more.
Changes blade length B.
Finishes blade with lapping.
Dimension P tolerance and the specification unit remain the same.
shape is not applicable with a corner radius of 0.D
0.3¯PRC¯10.1mm increments
PRC (̄P-0.2)/2PCCCGC:Not applicable
0.3¯PCC¯10.1mm increments
20B̄ GC<90B1B increments
Blade length B˘f+2f=P/2Mtan(90B-GCB)
PCC (̄P-0.2)/2PRCCGC:Not applicable
LKCCLKZCPRCCPCC:Not applicable
Adds Radius to blade tip.
Adds Chamfering to blade tip.
Adds single key
flat at head.
Adds double key
flats in parallel.To change angle, add KC.
Adds double key
flats in parallel.
Changes the position of key flat.
1Bincr.
(P:0.001mm incr.)
Changes tolerance on P. Changes tolerance on P(W).
Changes full
length tolerance.
Changes full
length tolerance.
30+B(BC)̄ LC<L25+B(BC)̄ LC<L
(Combination with LKCCLKZU0.01mm increments)
0.1mm increments
When LC-B(BC)is
30mm or less, B(BC)is LC-30mm.
0.1mm increments
When LC-B(or BC)is
25mm or less, B(or BC)is LC-25mm.
Changes full length. Changes full length.
No key flat.Punch & retainer set
not available.
KCCWKC:Not applicable KCCWKC:Not applicable
0.1mm incrementsChanges head thickness 2¯TC<5
When LC is combined, L=LC.
0.1mm increments
L is shortened by(5-TC).
Changes head diameter.
Punch & retainer set not applicable.
Punch & retainer set not available.
Modifies head to fit to select retainers(SLS).
Punch & retainer set not available.
D10~32:Applicable
Modifies shank to fit to urethane stripper(USN).
PCKmax.=D-1.1 Applicable to L˘80, L˘90
D10~32:Applicable
No press-in lead
Punch & retainer set not available.
Applicable USN
Replaces dowel pin.Attached MS6-25 to MSTP6-25
(tapped type).
15%
100~20010~29 30~99
5% 10%
1~9Quantity-Rate
IVolume discount rate
I SKD 11 or equivalent
With dowelDowel pin
SKD 11 or equivalent
Shape Shape Shape ShapeShape
shapeSelect tip shape from A~G shown below.
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
HOW TO USE CATALOG
KSelect blue characters one by
one from the left to find order
symbols.
KOrder example
KDimensions unnecessary to specify
for order symbols are covered
with blue mesh.
KPrinted in red means Stock
Dimension Table
Product Name
Catalog No.
Materials and others
Photograph
Drawing
Page number
How to Order
KSelect alterations
with code.
Alteration
Days to ship
KPrices are to be quoted.
KVolume discount rates are available
for most products.
Price
Use the Contents page to find the products by
product name and page number.
How to find the product
¡
Volume discount is also
applicable to alteration fees.
CAD data
Two-dimensional CAD data(in DXF and
IGES formats)is available for some
products in this catalog. Download the
files from the MISUMI's website.
MISUMI SOUTH EAST ASIA
http://sg.misumi-ec.com/contents/cad/
MISUMI MALAYSIA
http://my.misumi-ec.com/contents/cad/
iviii
MSWZ
B
MSWA
L
MPM
B
MSW
L
MPMMSWS MSWAS MSWZS
t
H
B
L1.5
MPM
C
t
45B
30B
About the JIS notation
Fe3O4(Black oxide)(JIS B 0207/Grade 2)(JIS B 0207/Grade 2)(JIS B 0207/Grade 2)
Fe3O4(Black oxide)
(Washer type)
S45C33~38HRCFe3O4(Black oxide)
(Break through type)
34~43HRCS45C
MSW SCM435(M2.5~10)S45C(M12~45)
MSWS S45C34~43HRC
(Break through, short type) (Washer, short type)(Short type)
KIn the case that JIS standards are indicated on certain location of the product page, please note that this is only
for product reference and is not an indication that the product is conforming to the JIS standards
KThe number of days(business days following
the day of your order)required before shipping
from MISUMI's distribution center in Singapore.
KExpress delivery services P.i
P.i
12 Days 14 Days
10 Days8 Days
18 Days
5 Days 7 Days
Days3
BExpress Express C
Express ATExpress
iii-iv.ai 6/7/2011 1:14:36 PM
How to start business with Misumi ................................................................................................................... i
How to use catalog ....................................................................................................................................... iii
STRIPPER GUIDE PINS & BUSHINGS (PRODUCT DATA) ................................................................. 1
GUIDE FOR STRIPPER GUIDE PINS & BUSHINGS ................................................................................ 3
STRIPPER GUIDE PINS............................................................................................................................. 5
HIGH RIGIDITY STRIPPER GUIDE PINS ............................................................................................... 9
FIXED-TYPE STOPPERS FOR BALL BEARING GUIDES/CLAMPS FOR
STRIPPER GUIDE PIN ........................................................................................................................ 10
STRIPPER GUIDE BUSHINGS ......................................................................................................... 11
BALL BEARING CAGES/SPRINGS FOR BALL CAGE ...................................................................... 16
GUIDE FOR 3 mRANGE STRIPPER GUIDE PINS/BUSHINGS ....................................................... 17
3 mRANGE STRIPPER GUIDE PINS ............................................................................................... 18
3 mRANGE STRIPPER GUIDE BUSHINGS ..................................................................................... 19
GUIDE FOR HIGH PRECISION STRIPPER GUIDE PINS & BUSHINGS............................................. 21
HIGH PRECISION CARBIDE STRIPPER GUIDE PINS ...................................................................... 22
HIGH PRECISION STRIPPER GUIDE PINS ..................................................................................... 23
HIGH PRECISION STRIPPER GUIDE BUSHINGS ........................................................................... 25
GUIDE FOR GUIDE POST SETS FOR DIE SET ................................................................................ 27
BALL BEARING GUIDE POST SETS FOR DIE SET ........................................................................... 31
PLAIN GUIDE POST SETS FOR DIE SET .......................................................................................... 35
GUIDE POSTS FOR DIE SET .............................................................................................................. 39
BALL BEARING GUIDE BUSHINGS .................................................................................................... 43
BALL BEARING CAGES FOR GUIDE BUSHING ................................................................................ 46
STOPPERS/SPRINGS FOR BALL BEARING GUIDE........................................................................... 47
ANTI-RISE RINGS FOR BALL CAGE.................................................................................................... 48
PLAIN GUIDE BUSHINGS FOR DIE SET .......................................................................................... 49
ADHESIVE CEMENT ............................................................................................................................. 51
GUIDE FOR HOLDER GUIDE POST SETS.......................................................................................... 53
PLAIN GUIDE POST SETS ................................................................................................................... 55
INTEGRATED TYPE PLAIN GUIDE POST SETS ................................................................................ 57
BALL BEARING GUIDE POST SETS.................................................................................................... 59
GUIDE POSTS/GUIDE HOLDERS/GUIDE BUSHINGS ...................................................................... 63
SHOULDER PUNCHES ........................................................................................................................ 65
JECTOR PUNCHES ............................................................................................................................. 67
PUNCHES WITH DOWEL ................................................................................................................... 69
STRAIGHT PUNCHES ........................................................................................................................ 71
PUNCH BLANKS .................................................................................................................................. 73
STRAIGHT PILOT PUNCHES .............................................................................................................. 75
BUTTON DIES ....................................................................................................................................... 77
DOWEL PINS ....................................................................................................................................... 81
DOWEL PINS/SPRING PLUGS FOR DOWEL PINS ........................................................................... 83
STEPPED DOWEL PINS/DOWEL PIN EXTRACTOR........................................................................... 84
HEXAGON SOCKET HEAD CAP SCREWS/SPRING WASHERS ....................................................... 85
LOW HEAD CAP SCREWS/EXTRA LOW HEAD CAP SCREWS ....................................................... 87
SCREW PLUGS .................................................................................................................................. 88
STRIPPER BOLTS ............................................................................................................................. 89
SHIM TAPES ....................................................................................................................................... 90
WASHERS/SPACERS ........................................................................................................................ 91
MAGNETS ............................................................................................................................................ 93
GUIDE LIFTER SETS ........................................................................................................................ 95
LIFTER PIN SETS/LIFTER PINS ......................................................................................................... 97
GUIDE FOR COIL SPRINGS .............................................................................................................. 99
(TECHNICAL DATA) INSTRUCTIONS AND NOTES FOR COIL SPRINGS ........................................ 101
WIRE SPRINGS .................................................................................................................................. 102
COIL SPRINGS .................................................................................................................................. 109
SPRING GUIDE RETAINERS .............................................................................................................. 127
LOAD-DEFLECTION DIAGRAM FOR COIL SPRINGS ...................................................................... 128
Tooling Map............................................................................................................................................ 129
Registration Form .................................................................................................................................. 134
: Additional sizes/New stock items : Existing stock itemsm Existinms :Contents
21
Catalog No.
(SGBD) (SGBA) (SGBH) (SGBB)
2O~12O 2O~12O
- -
- -
- -
- - -
-
-
-
SGBL25-20
VGBL25-20
SGBH25-20 -0.004~0.008
0.014~0.060
0.003~0.006
(kgf)
4,463kgf
3,382kgf
420kgf
(kgf/mm2)
228kgf/mm2
198kgf/mm2
21kgf/mm2
0
20
40
60
80
100
5 10 15 20 25 30
VSGCZ
VGBM
23.19M10
6.21M10
3.95M10
-4
-4
-4
10O~20O
2O~17O
3O~8O
8O~10O
5O~15O
2O~14O
S50C
-10O~-20O0O~-10O
2O~ 6O1O~33O
3O~35O 6O~ 8O
-2O~-16O
VSGCZ20-25
VGBM20-25
K
5
SGPHSTOCK STOCK STOCK STOCK STOCK
STOCK STOCK
SGOH
5 6
SGPN SGON
65 A
7
SGPR SGOR
8
SGPW
7
5 5
9 9
SGPWS SGPWH SGBD SGBA SGBH SGBL SGBT
11 12
SGSF SGBF
12
SGBZ SGHZ
13
SGCZ SGFZ SGBM SGHM
13
5 A
10
SSTK5 A
10
FCLP
5 T A
16
BSWPSGBBW SGBBS SGBBH
15
MBSH MBJH
16
SGBB SGBBL SGBBF
14
18
TGPR5 A
18
TGPH TGPN WVGPH WVGPN WVGPS7
22B
TGSF TGBF TGCZ TGFZ
19 20 20
TGBM TGHM5 A5 A
19
TGBL TGBT TGBZ TGHZ
VSGSF VSGBF VSGCZ VSGFZ5
25A 5
26A
VGBL VGBH VGBZ VGHZ
25
VGPH VGPN VGPS
23
VGPR5
24A
VGBM VGHM5 A
26
-
RSGPW10
-
RSGPS10
-5 A
RSTKH
-5 T
RBJA 5 T A
-
RSWP
5 A
PRODUCT DATA STRIPPER GUIDE PINS & BUSHINGS
Plain bushing Ball bearing bushings
Clearance between
pin and bushing
Before
press fit
Clearance between
pin and bushing
After
press fit
Clearance between mounting hole and outside
diameter of bushing(recommended value)outside diameter of bushing
+2~+3 on one side to
outside diameter of bushing
+0.01~+0.03 on one side to
How to mountDevcon
adhesive
outside diameter of bushing
+0.01~+0.03 on one side to
Press fit Press fit Press fit
Inside diameter shrinkage while press fitting
Recommended press fit allowance for plate
SGBL,SGBT,SGBZ,SGHZ,etc.
Devconadhesive type
Press fit typeStraight type
Press fit type-Headed type-
Press fit typeLoctite adhesive type
See page 51 for Loctite adhesives.
IHow to mount stripper guide bushings
IMeasurement of fixed compression shear strength of guide bushings with Loctite 638
ISintered alloy oil-free bushings
With Loctite adhesive, shear force of 8~10 times greater than press fit(interference fit)was obtained.
Bushing that is made of special alloy and covered with fine solid lubricant, which is mainly
made of graphite. The small vacancies of the alloy are impregnated with lubricating oil.
Features Structure of special sintered alloy
SGBBL,SGBBF,SGBBW,SGBBS,etc.
Loctite adhesive type
Subject bushing Type
Stripper guide bushingLoctite adhesive type
Precision class stripper guide bushingLoctite adhesive type
Stripper guide bushingPress fit type (close fit)
Fitting clearance(Both sides)
Compression shear force Compression shear strength
Can be used for to subtle strokes of less than 1mm.
The solid lubricant on the surface enables the extra short strokes. Best suited as stripper guide bushing.
No limit in sliding direction. Can put up with reciprocating, rocking, and rotational motions.
Have excellent friction coefficients and wear resistance to cope with high-speed strokes.
Owing to new technologies, a large amount of solid lubricant is contained compared to other sintered
bushings. That makes it possible to maintain stable performance over a long period of time.
Though it is oil-free, its performance will be further enhanced with initial break-in grease or lubrication.
Range of useLubrication:Oil-free
Operating temperature limit:-40~+120AAllowable maximum speed:60m/min
Mechanical propertyThermal expansion coefficient:Density:
Test dataTest machine:Reciprocating motion test machine
Bushing:Guide pin:Bearing:Rate:Stroke:Lubrication:Application of initial breaking-in grease
Curing time:Room temperature(25A)M72 hours Plate:S50C Guide bushing:SUJ2
Plate and bushing had been degreased.
Compression test machine
Extracting rate:10mm/min
Extracting jig
Plate
Loctite layer
Subject bushing
Bea
ring
tem
pera
ture(
A)
Endurance time(hr)
Transition of bearing temperatures in various bearing materials
From other manufacturersF20-25
Graphite contained copper alloy
Copper alloy oil-free type bushing
(Sintered alloy oil-free type bushing)
Trade name
From othermanufacturers
Graphite embedded copper alloyoil-free type bushing
Copper alloyoil-free type bushing
Sintered alloyoil-free type bushing
Proportional abrasion loss
- -
12M10-6/A5.8g/cm3
F20MF28ML25
VGPS20(SKD11 58HRC~)1.2N/mm2 12kgf/cm2
30m/min,300spm
50mm
mm/(N/mm2C/sChr)
Special alloy
Graphite
Vacancy(filled with oil)
Item
K
K
K
KC
CC
C
CAs the bushing is impregnated with lubricating oil, do not clean the inside of it.
CIt is not possible to accurately measure the surface roughness because there are small vacancies
in the material. However, the finishing method is the same as that of other types of guide bushings.
KNotes
STRIPPER GUIDE PINS & BUSHINGS
STRIPPER GUIDEPINS & BUSHINGS
DeliveryPage
Name STRIPPER GUIDE PINS-Headed type-
HIGH RIGIDITY STRIPPER GUIDE PINS FIXED-TYPE STOPPERS FOR BALL BEARING GUIDE CLAMPS FOR STRIPPER GUIDE PIN STRIPPER GUIDE BUSHINGS-Steel- -Oil free--Copper alloy-
-Sintered alloy- STRIPPER GUIDE BUSHINGS STRIPPER GUIDE BUSHINGS BALL BEARING CAGES SPRINGS-Copper alloy-
STRIPPER GUIDE PINS-3Om range- STRIPPER GUIDE BUSHINGS-3Om range, Steel--Demountable type-
-Demountable type-
HIGH RIGIDITY NEEDLE ROLLER STRIPPER GUIDE PIN SETS -Single roller type- NEEDLE ROLLER CAGE FIXING TYPE STOPPERS FOR NEEDLE ROLLER SPRINGS
-Copper alloy- -Sintered alloy- HIGH PRECISION CARBIDE STRIPPER GUIDE PINS
-Copper alloy- -Sintered alloy-
STRIPPER GUIDE PINS-Straight type- STRIPPER GUIDE PINS-Demountable type-
No.638No.638Loctite adhesiveLoctite adhesive
3
33
STOCK3 STOCK3 STOCK3 STOCK STOCK
33 3
HIGH PRECISION STRIPPER GUIDE PINS HIGH PRECISION STRIPPER GUIDE BUSHINGS-Steel-
5 T ASTOCK 5 T A STOCK STOCK
Please note that the above delivery day only applicable to Singapore area. For other areas, please refer to P.i
001-002.ai 5/30/2011 6:09:07 PM
Catalog No.
RSGPW
SGPWSSGPWH
-0.010
-0.015
-0.010-0.013
-0.010-0.013
-0.010-0.013-0.010-0.012
-0.012-0.010
SUJ2
SUJ2
SKD11
SUJ2
Catalog No.
SGPH
SGOH
VGPH
TGPH
SGON-0.015 SUJ2
SKD11
SKD11
VGPN
SUJ2TGPN
VGPS
SUJ2-0.010 SGPN
Catalog No.
WVGPN
WVGPS
-0.010
-0.012
SGOR-0.015 SUJ2
SUJ2-0.010 SGPR
Catalog No.
VGPR SKD11
-0.010
-0.015
Catalog No.
SGPW SUJ2
Catalog No.
Catalog No.
SGBASGBHSGBDSGBL
VGBHVGBL
+0
-0.0050
-0.005-0.003
-0.013-0.010
-0.008-0.003
-0.008-0.003
-0.006-0.003
SUJ2
SUJ2
TGBZTGHZ
SGBZSGHZ
FC250
-0.008-0.003
-0.006-0.003
-0.005-0.003
-0.008-0.003
-0.006-0.003
-0.005-0.003
-0.008-0.003
-0.006-0.003
-0.005-0.003
Catalog No.SGSFSGBF
VSGSFVSGBFSGCZSGFZ
VSGCZVSGFZ
Catalog No.
SGBBL
SGBBF
SGBB
SUJ2
0.005
WVGPH
SGBTTGBLTGBT
SUJ2
MBSHCMBJH
-
P.9
P.5
P.22
P.23
P.18
P.6
P.23
P.18
P.22
P.7
P.24
TGPR SUJ2 P.18
P.8
P.13
P.25
P.12
P.19
-0.005-0.003 VGBZ
VGHZP.25
P.12
Catalog No.
TGBMTGHM
SGBMSGHM
P.19
VGBMVGHM
P.26
P.13
P.11
P.19
P.25
P.26
TGSFTGBF
TGCZTGFZ
P.19
P.19
P.14
Catalog No.
SGBBW
SGBBS
SGBBH
SUJ2 P.15
K
K
K
K
K
K
K
K
K
K
K
K
K
K
SRW
SRW
43
IStripper guide pins IStripper guide bushingsType Example Overview
Headed type
Straight type
Demountable type
Demountable and both ends tapped type
Stripper plate fixing type
ExampleType
Lubricant type
Oil-free type
Ball bearing
Oil-free type
Oil type
Cage-integrated type
Ball bearing Cage-separated type
(Copper alloy internal coating)
Oil-free type
(Sintered alloy)
Guide type Refer page
Oil groove
Sliding part diam.tolerance Material Type Refer page
(High precision)
(High precision)
Oil groove
MaterialSliding part diam.tolerance Type Refer page
Carbide
Carbide
Carbide
Lead-in part
Lead-in part
Oil groove
MaterialSliding part diam.tolerance Type Refer page
MaterialSliding part diam.tolerance Refer page
Since the guide pin is fixed to the stripper plate, which is close to
the cutting part (punchCdie), the shaft rigidity can be improved
compared to conventional fixing methods. Therefore, higher levels
of precise punching and durability can be realized.
Lead-in part:Lead-in part is provided on the threaded side.
By adjusting the mounting hole, this type can be
fixed either by press fit or transition fit.
Straight demountable type is mounted with a bolt from
the die set side. It enables demounting without disassembling the dies.
Perpendicular can be retained by mounting it in contact with the
punch plate face firmly.
SRW ring:This ring can be used to retain the pin when the hole is
through without backing plate.
Int. dia. tolerance Material Type How to mount Refer page
Int. dia. tolerance Material Type How to mount Refer page
Straight
Headed
Straight
Straight
Headed
Straight
Press fit
Devcon adhesive
Loctite adhesiveHeaded
Straight
Headed
Straight
Lubricant
type
Oil-free
type
Oil-free
type
Straight
Headed
Straight
HeadedLoctite adhesive
Straight
SUJ2+Copper alloy
Headed
Straight
Headed
Type
Type
Int. dia. tolerance Material Type How to mount Refer page
Material Type How to mount Refer page
Headed
Straight
Loctite adhesive
Press fit
Devcon adhesive type:2~3mm clearance on each side of the mounting hole.
Loctite adhesive type:0.01~0.03mm clearance on each side of the mounting hole.
Press fit type:While the precision hole is required for mounting, these stripper guide bushings
enable parallel machining and assembly that results improvement in workability.
Oil-free typeELubrication is not needed because special solid lubricant is embedded.
The guide's internal surface is coated with copper alloy for improved seize resistance.
There are oil type and oil- free type in which special solid lubricant is embedded.
Using ball bearings for sliding motion enables outstanding seize resistance.
(Endurance will be further improved with initial breaking-in oil.)
This stripper guide pin is for the dies with which the upper die is pushed up from the
bottom, e.g. for intermittent cutting process of progressive dies, tapping types, etc.
Both ends are fastened with snap rings, so the cage cannot drop out of
the bushing.
Headed
StraightLoctite adhesive
Headed
SRW ringEUse it as a stopper on the die plate side
of the stripper guide pin.
-GUIDE-STRIPER GUIDE PINS & BUSHINGS
Headed
Straight
Int. dia. tolerance Material Type How to mount Refer page
Loctite adhesiveHeaded
Special
sintered alloyStraight
Headed
Straight
Sintered alloy typeE
Headed
Straight
Straight
Headed
Straight
Headed
Material Type How to mount Refer page
Thick
Headed
Straight Loctite adhesive
Using ball bearings for sliding motion enables outstanding seize resistance.
Please note that the stroke is limited.
For the ball cage, use MBSH(made of aluminum)or MBJH(made of plastic).(See P.16)
See page 51 for Loctite adhesives.
A new type of oil-free bushing produced from a special alloy on which solid lubricant made mainly of
graphite is dispersed and sintered. Its friction coefficient is lower than those of other cast iron and
copper alloy bushings, and wear resistance is superior. Sufficient amount of solid lubricant makes its
oil content high, allowing high-speed operation without losing oil film.
Punch plate
Punch plate
Stripper plate
Stripper plate
Die plate
Die plate
Spring
Screw plug
Punch plate
Stripper plate
Die plate
Punch plate
Punch plate
Stripper plate
Stripper plate
Die plate
Die plate
Spring
Punch plate
Punch plate
Punch plate
Punch plate
Stripper plate
Stripper plate
Stripper plate
Stripper plate
Die plate
Punch plate
Stripper plate
Die plate
Die plate
Die plate
Die plate
Punch plate
Stripper plate
Die plate
Needle roller bearing guide
Ball bearing guide/Plain guide
(High precision)
(High precision)
(High precision)
(High precision)
(High precision)
(High precision)(High precision)
(High precision)(High precision)
(High precision)(High precision)
(High precision)(High precision)
Overview
(High precision)(High precision)
SRW P.92
SRW P.92
(3Om ) range
(3Om ) range
(3Om ) range
(3Om )(3Om )range
range
(3Om )(3Om )
(3Om )(3Om )
rangerange
rangerange
(3Om )(3Om )
rangerange
(3Om )(3Om )
rangerange
003-004.ai 5/28/2011 10:47:29 AM
65
SGOHSGPHPrice
140<LC¯200140<LC¯200140<LC¯200120<LC¯180100<LC¯150
80<LC¯120
LC
25201613108
D
SGPHSGOH
20¯LC<L
40¯LC<L
LC
Price PriceSpec.
BC
LC
CodeAlteration
BCB
LLC
0¯BC¯DM2
SGOH
SGPH
5
Catalog No. L(LC) (BCCTCCGCCTKCCRC)
SGPH 16 LC95 BC15
5
100
L
SGPH 16
Catalog No.
SGOHSGPH
140*
140*
130*
130*
120*
120*
120*
120*
110*
110*
110*
110*
100*
100*
100*
100*
90*
90*
90*
90*
90*
80*
80*
80*
80*
80*80
70*
70*
70*
70*
70*70
60*
60*
60*
60*
60
50*
50*
50*
50
40*100*
40
L
25*
20*
16*
13*
10*
8
D
SGOH*SGPH
28
25
20
16
13
10
2.0
1.5
1.0
TypeCatalog No.
25
20
16
13
10
8
BR
8888
7777
666666
555555
444444
333333
222222
180~160~90~80~70~50~40~
2520161310
8
L120~L(C)max.GL 40~119.5
8FFFFB
L+0.30
D-
0.0
15
-0
.01
0
R
0.2
DL
+0.008
+0.017
+0.007
+0.015
+0.006
+0.012
D
SGOH
SGPH
2¯TC<5
0+0.02
0+0.3
T
TC
T
T
RC
D+
3
5 +0.30 R¯0.5 R
-0
.01
0-
0.0
15
D
B
0+0.3L
0.2
1.6
0+0.35
D+
3
D1.6
130* 140*
TC
TKC
RC
R¯0.5
m5
LLC
m5
D
F=108
m5
Spec.CodeAlteration
40
GC
D Y
2520161310
815B Y 3
5
D8C10
13C1620C25
1.01.52.0
1.5C2.02.0C2.52.5C3.0
--
--
F=
K
K
K
K
::
When full length is reduced shorter than min.
length, apply BC accordingly if needed.
Changes dimension L(full length) 0.5mm increments
Full length L is the dimension as specified.
U/Price Q'ty:1~9
Number of grooves(n)(Oil groove type)
Changes dimension T(head thickness) 0.1mm increments
When LC is applied, the full length is equal to LC.
L becomes shorter by(5-TC).
Changes dimension B 1mm increments
Adds taper on the tip
Changes dimension
R(radius)on the tip
Normal type R RC(Selection)
-HEADED TYPE-STRIPPER GUIDE PINS
58HRC~SUJ2
58HRC~SUJ2
Order
Delivery
Alteration
IVolume discount rate
RateQuantity 50~99
10%1~9 10~49
5%100~200
15%-
0.5mm increments
Changes dimension L(full length)(Long type LC)
Changes head
thickness tolerance
The B dimension conforms to the standard.
T
A
A
Days
ExpressExpressDays
Express
SGOH with * are Stock Product. SGON with * are Stock Product.
For area out of Singapore please refer to P.i.
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
SGP StockSGP StockPrinted in Red
volume discount rate is also aAll price &
SGP StockSGP StockPrinted in Red
¡ SGPH SGOH* ¡ SGOH (w/o *)
syaD3For area out of Singapore please refer to P.i.
syaD3
Stocks Availability Subjected to Prior Sales.
SGPN
SGON
D
+0.024
+0.015
+0.029
+0.018
+0.035
+0.022
M5M12
M6M15
M8M20
P0.8
P1.0
P1.25
Dp6
MM B
L +0.30
D-
0.0
15
-0
.01
0
2 R
1.6G
0.2
0.2G
1.6
R2
D
0+0.3L
B
p6D
F F F F 8
R B
8
10
13
16
20
25
Catalog No.Type
1.0
1.5
2.0
10
13
16
20
25
28
SGPNSGON*
D
8
10
13*
16*
20*
25*
L
40
10040
50
50
50
50
60
60
60*
60
60
7070
70*
70*
70*
70
8080
80*
80*
80*
80
90
90*
90*
90*
90*
100*
100*
100*
100
110
110*
110*
110
120
120*
120
120
130
130
140
140
SGPN SGON
Catalog No.
SGPN 20
L
80
5
BC20LC75SGPN 20
(BCCDKCCGCCRCCTGC)Catalog No.
5
SGPN
SGON
0¯BC¯DM2
LCL
BBC
LC
BC
0.01 A
A
LCLLC
p6
40
Spec.CodeAlteration Spec.CodeAlteration
GC
DKC
TGC
D Y
25
20
16
13
10
815B Y
3
5
DK
C
Dm5
25
20
16
13
10+0.012+0.006
+0.015+0.007
+0.017+0.008
8
Dp6 Dm5
RCD
1.01.52.0
RC
1.6
8888
7777
666666
555555
444444
333333
222222
180~160~90~80~70~50~40~
2520161310
8D
L
--
--
L120~L(C)max.GL 40~119.5
F=108F=
SGONSGPNPrice
140<LC¯200140<LC¯200120<LC¯200120<LC¯180100<LC¯150
80<LC¯120
LC
25201613108
D
-0
.01
5-
0.0
10
MM
L(LC)
K
K
SGPN SGON20¯LC<L 40¯LC<LK K: :
1.5C2.02.0C2.52.5C3.0
8C1013C1620C25
MMPitch
Price Price
P.i
(Oil groove type) Number of grooves(n)
58HRC~SUJ2
U/Price Q'ty:1~9
Using BC code
Full length L and tap depth are the dimensions as specified.
When BC=0,2mm groove is eliminated.
Changes dimension B 1mm increments
Changes dimension L(full length) 0.5mm increments
When full length is reduced shorter than min.
length, apply BC accordingly if needed.
Changes dimension L(full length)(Long type LC) Adds taper on the tip
Modifies the tap side end
Perpendicularity 0.01/Surface
roughness 1.6a
Changes press fit tolerance
SGON:Not applicable
-STRAIGHT TYPE-STRIPPER GUIDE PINS
Changes dimension
R(radius)on the tip
Normal type R RC(Selection)
Alteration
Delivery
Order
58HRC~SUJ2
IVolume discount rate
RateQuantity 50~99
10%1~9 10~49
5%100~200
15%-
0.5mm increments
The B dimension conforms to the standard.
When LC ¯25, the pilot hole for tapping
may go through.
T
A
ADays Express Express
Days Express
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
¡ SGPNC SGON* ¡ SGPN Printed in BlueC SGON w/o*
Stocks Availability Subjected to Prior Sales.
005-006.ai 5/28/2011 10:48:43 AM
87
SGOR
SGPRK
K
SGOR
SGPRK
K
L(LC)
SGORSGPRPrice
120<LC¯140120<LC¯140120<LC¯140100<LC¯12080<LC¯10070<LC¯ 80
LC
25201613108
D
D Y
2520161310
815B
3
5
D8C10
13C1620C25
1.01.52.0
1.5C2.02.0C2.52.5C3.0
SGPR
SGOR
M5M12
M6M15
M8M20
P0.8
P1.0
P1.25
L(C)
D
81013162025
30~ 40~ 60~ 70~ 80~2
2
2
2
2
2
3
3
3
3
3
3
4
4
4
4
4
4
5
5
5
5
5
5
6
6
6
6
6
SGPRSGOR
Catalog No.
SGPR 16
L
100
5LC95SGPR 16
Catalog No.
P.i
P.i
5 P.i
5
D
D1
5
D0
-0
.00
5
D -0.03-0.05 3
0-0.2B
1.6
L
R
0.2
-0
.00
50
D
5
1D
1.6
B -0.20
3-0.05-0.03D
0.2
L
F F F F F 8
D-
0.0
10
-0
.01
5
R
D1
13
16
20
23
27
32
R
1.0
1.5
2.0
B
8
10
13
16
Catalog No.Type D
8
10
13
16
20
25
LSGPR SGOR
30
30
40
40
40
40
50
50
50
50
50
6060
60
60
60
60
70
70
70
70
70
70
80
80
80
80
80
90
90
90
90
100
100
100
100
110
110
110
120
120
120
P.92SRW
LC
L
LC
L
LC
Spec.
LC
CodeAlteration Spec.CodeAlteration
GC
Y
BCBC
RCRC
MM
-0
.01
5-
0.0
10
+0.30
+0.30
MM
L120~L(C)max.GL(C)30~119.5
F=108F=
-
MMPitch
(BCCGCCRC)
Price Price
Stocks Availability Subjected to Prior Sales.
MMPitch
BC6LC54SGPW 10
(BC)Catalog No. L(LC)
Price Price
5¯BC<B
SGPW
D-
0.0
3-
0.0
5
D0
-
0.0
05
2
B 0-0.3
T
L+0.020
0.2
D
N R
D R T B
8~13
12
1.0
8
17
Catalog No.
Type D
8
10~15 1.5
14 10
13
25~ 70
30~ 75SGPW
M4M12P0.7
M5M15P0.8
M4P0.7
M5P0.8
L
3
10
13
16
1
55
L
SGPW 10
Catalog No.
NPitch
D1
Alteration Spec.Code
BCBC
23 16 40~100M6M15P1.0
M6P1.0
2716~21 2.0
5
2060~120M8M20
P1.25M8
P1.2532 25
P.P.
S.P.
D.P.
S.P.
P.P.
SGPWP.P.
S.P.
D.P.
SGPW
SRW SRW
5
Alteration Spec.Code
LC D 8~13 25¯LC<L
D16~25(Lmin-5)̄ LC<LLC
L
P.i
P.92 P.92
MM
-0
.01
5-
0.0
10
-DEMOUNTABLE AND BOTH ENDS TAPPED TYPE-STRIPPER GUIDE PINS
58HRC~SUJ2
U/Price
Q'ty:1~95mm increments
Days Express Express
Days
Alteration
Delivery
Order
3
T A
IVolume discount rate
RateQuantity 50~99
10%1~9 10~49
5%100~200
15%-
0.5mm increments
Changes dimension L(full length)
The depth of M tap becomes
shorter by(B-BC).
Changes dimension B 1mm increments
Use this stripper guide pin for the dies with which the punch plate is pushed up from the lower die side.Example
Lower die set
Cylinder
Screw plug
Spring
Upper die set
Intermittent cutting process of progressive die Movable bottom die
Tapping bar
Spring
Screw plug
Uppe
r die
Low
er d
ie
¡ Printed in Red ¡ Printed in Blue
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
-DEMOUNTABLE TYPE-STRIPPER GUIDE PINS
SUJ2
58HRC~
(Oil groove type)
58HRC~SUJ2
Number of grooves(n)
U/Price Q'ty:1~9
Order
Delivery
Alteration
Days Express
Days3
A
IVolume discount rate
RateQuantity 50~99
10%1~9 10~49
5%100~200
15%-
Washer for SGPR
Example
Days Express Express
Days Express
T
A
A
Changes dimension L(full length)
0.5mm increments
0.5mm increments
Changes dimension L(full length)(Long type LC)
30¯LC<L
Adds taper on the tip
The depth of M tap becomes shorter by(B-BC).
Changes dimension B 1mm increments
Normal type R RC(Selection)
Changes dimension
R(radius)on the tip
5¯BC<B
For area out of Singapore please refer to P.i.
For area out of Singapore please refer to P.i.
For area out of Singapore please refer to P.i.
For area out of Singapore please refer to P.i.
For area out of Singapore please refer to P.i.
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
e volume discount rate is also All price &
SGP StockSGP StockPrinted in Red
007-008.ai 5/28/2011 10:50:12 AM
109
LAC 78SGPWH 20 50
LAC LBC
TC NC
PC
B25 TC4
16 10~2010~20
20 11~2525 11~30
12SSTK 16
13
S
SGPWS SGPWH
10~30
B3060100SGPWS 25
13
16
20
25
30~5030~6040~6030~6030~7040~8040~7040~7050~8050~7050~8060~90
6070807080908090
10090
100110
LB LA
B
DD
LB LA
B
MMPitch
LA(LAC) LB(LBC) BCatalog No. (TCCPCCNC)
Price Price
1 2
Alteration Code Spec. Spec.CodeAlteration
D LA
60¯LAC< 7071¯LAC< 8061¯LAC< 7050¯LAC< 6060
70807080908090
10090
100110
16
13
71¯LAC< 8081¯LAC< 9070¯LAC< 8081¯LAC< 902091¯LAC<10080¯LAC< 90
25 91¯LAC<100101¯LAC<110
D LA
20¯LBC<6030¯LBC<6020¯LBC<6020¯LBC<5060
70807080908090
10090
100110
16
13
20¯LBC<7030¯LBC<8030¯LBC<7030¯LBC<702040¯LBC<8040¯LBC<70
25 40¯LBC<8050¯LBC<90
LAC
LA
LBC
LB
1
5
PC
TC
10
1
15B
D t MCatalog No.
Type No.D1
17.3
24
29
15
19
24
8.5
11
SCatalog No.
15 12 6.5
6
8
5
P.i
S
10~13PD
(No.) 14~18 19~23 24~28 29~30
M6M15
M8M15
M8M15
M6M20
M8M20
M8M20
M6M25
M8M25
M8M25
-
M8M30
M8M30
-
M5M15 M5M20 M5M25 - -
-
M8M35
13
16
20
25
D
1D
M
3
t
U RCatalog No.Type D LA
3
4
M5M22
P0.8
M8M25
P1.25
M6M25
P1.02
2 1.5
3
BLBLACatalog No.
---
0.5
2
D+
0.0
10
+0
.01
5
-0
.01
4-
0.0
10
U
R0.2 1.6 0.2
15B
+0
.01
5D
+0
.01
0
-0
.01
0-
0.0
14
R
5
15B0.2 1.6 0.2
1.6
D+
7
5
5
U
PD
4FCLP 5
FCLP
Catalog No.
Type TM
MCatalog No.
FCLP 45
P.i5
MMR
MMR
10 8
T=5
10 8 4.5
5
13
.5
P.C.
D=D+
18
M
D
For area out of Singapore please refer to P.i.
For area out of Singapore please refer to P.i.
-STRIPPER PLATE FIXING TYPE-HIGH RIGIDITY STRIPPER GUIDE PINS FIXED-TYPE STOPPERS FOR BALL BEARING GUIDES / CLAMPS FOR STRIPPER GUIDE PIN
Changes flange thickness 3¯TC<5
1mm increments
Applicable to SGPWH
Adds groove for bolt fixing
Applicable to SGPWH B˘16
Fixed at 10mm position(for M6)
5¯PC¯B-5
Adds groove for bolt fixing 1mm increments
Applicable to SGPWS
SGPWS and SGPWH can be used with any bushings listed on pages 11 to 16. Select a suitable combination according to the nature of operation.
S1mm increments
U/PriceQ'ty:1~9
SSTK(Fixed-type stopper)
Use SSTK when setting a stripper guide bushing for ball cage(P.15)to SGPWS and SGPWH.
1Bolt CB
S45C
Black oxide(Fe3O4)1CB 2Spring washer
SSTK (Fixed-type stopper for ball bearing)
(Clamp for stripper guide pin)
No surface
treatment
to the bottom
SGPWS (Straight type)
SGPWH (Flanged type)
B1mm increments
LB10mm increments
SGPWH
SGPWS(Straight type)
(Flanged type)
IVolume discount rate
-RateQuantity
5%1~9 10~20
The tap depth becomes shorter by(LB-LBC).
1mm increments
Dimension LA alteration
The tap depth becomes shorter by(LA-LAC).
Days
Days Express
IVolume discount rate
-RateQuantity
5%1~9 10~20
DeliveryOrder
Alteration
Order
Delivery
U/Price (1Pc.)
Q'ty:1~9
S45C
Black oxide(Fe3O4)CB4-10
Days Express
IVolume discount rate
-RateQuantity
5%1~9 10~20
Order
Delivery
58HRC~SUJ2
58HRC~SUJ2
U/Price Q'ty:1~9
Changes dimension LB1mm increments
SGPWH(Flanged type)
FCLP can be used as a clamp for SGPWH, RSGPW and
RSGPS. For D20 and below, use three clamps, and for D25
and adove, use four clamps.
A
A
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
For area out of Singapore please refer to P.i.
009-010.ai 5/28/2011 10:50:50 AM
1211
DCatalog No.
Type dL
12
14
18
22
25
32
SGBD
81013162025
1010
131313
16161616
2020202020
2525252525
303030 35
SGBD
SGBA
13
13
13
13SGBA
20
25
16
12
Catalog No.
Type d
10
8
10
10
252016
30
30
30
20
2016
25
25
25
35
20
20
16
16
25
L
+0.020+0.01214
18
22
25
32
+0.024+0.015
+0.017+0.028
SGBH
SGBL
SGBH
+0.020+0.009
+0.008+0.017
25
32
22
20
25
16
30
30
30
20
2016
16 25
25
25
35
35
35
3513
13
13
13
+0.007+0.01514
18
12
Catalog No.
Type d
10
13
8
10
10
3020
20
20
16
16
16
25
25
L
SGBL
0-0.007
-0.0060
25
32
22
20
25
16
30
30
30
20
20
20
2016
25
25
25
35
35
35
13
13
13
-0.005014
18
12
Catalog No.
Type d
10
13
8
10
10
3020
20
20
16
16
16
25
25
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
L
Dn5
m5D
Dh4
D0
+0
.3
d-
0.0
08
-0
.00
3
6.3
0.2
L0
-0.2
41
L
Dn5
A0
-0.2L
3
0.2
0+
0.0
05
d1.6
G
D-0.03-0.05
AF0.01
D+
3
-0.20
L
3+0.3
0 3-0.05-0.03
D
Dm
5
F0.01 A
0
0.2
-0
.00
5d
A
0-0.2L
0.2
-0
.00
8-
0.0
03
L14
d
Dh4
A3 -0.05
-0.03D
1.6G
F0.01 A
1.6G
35
L14
SGBT
0-0.007
-0.0060
25
32
22
20
25
16
30
30
30
20
20
2016
25
25
25
35
35
35
3513
13
13
-0.005014
18
12
Catalog No.
Type d
10
13
8
10
10
3020
20
20
16
16
16
25
25
22
22
22
22
22
LDh4
16
13
16
13
SGBZ
13
1624 0-0.006
-0.007034
28
25
20
0-0.005
16
20
13
Catalog No.
SGBZ
Type
10
13
8 10
d
3025 35
2016
L
10 13
13
13
16
16
16
16
20
20
20
20
20
25
25
25
25
30
30
30
35
35
h4D
30
30
30
30
SGHZ
20 2520161313SGHZ
34
28
24
-0.0070
-0.0060 13
20
25
16
20
20
20
16
16
25
25
25
Type
Catalog No.
16
130
-0.005
h4D
13
13
d
8
10 10
10
20
20
16
16
25
L
35
35
35
0-0.2
A
L
h4D
1.6G
-0
.00
3-
0.0
08
-0.05-0.03
D3
d
F0.01
0.2
A
-0.2
D+
2
3 0
L0
+0.3
1.6G
-0
.00
3-
0.0
08
h4
-0.05-0.03
D
3D
d
A
F0.01
0.2
A
D+
3
-0.20
L
3+0.3
0 3-0.05-0.03
D
Dh4
F0.01 A
0.2
-0
.00
8-
0.0
03
d
A
1.6G
SGBTSGBH 10
Catalog No.
16
L
SGBD 16
Catalog No.
LC22.0
L(LC) 5
:L¯20 2L>20 3
SGSF
SGBF
13
20
25
16
16
Catalog No.
Type d
10
L
0-0.005
20
24
28
34
-0.0060
-0.0070
SGSF
10 13
13
16
16
16
16
20
20
20
20
22
22
22
22
20 22
25
25
25
25
25
30
30
30
30 35
35
35
20 22
35
35
Dh4
SGBF-0.00624 16
-0.007034
28
25
20
D
0
-0.0050
20
16
Catalog No.
Typeh4
d
13
10
13
10 13
30
30
25222016
16
30
302220
25
25
35
22
22
16 20
16 20
25
25
L
-0
.00
3
A
Dh4
30
-0.2L
D-0.05-0.03
d-
0.0
08
F0.011.6
G
0.2
A
D+
2
-0
.00
8
h4
33 0
-0.20
L
+0.3 A-0.03-0.05D
-0
.00
3d
D
F0.01
0.2
A1.6G
Catalog No.SGBD 8SGBD10SGBD13SGBD16SGBD20SGBD25
A 8
10
13
16
20
25
B
25
35
45B 5A
SGBD
2~3mm
AlterationCode
Spec.
Price
LC DLC
LCLC
RR
LCLC
8 8.0¯LC<L
d
10 8.0¯LC<L13 10.0¯LC<L16 13.0¯LC<L20 16.0¯LC<L25 20.0¯LC<L
-0.20
8 8.0¯LC<L
d
10 8.0¯LC<L13 10.0¯LC<L16 13.0¯LC<L20 16.0¯LC<L25 20.0¯LC<L
-0.20
SGBFCSGHZ SGSFCSGBZ SGBHCSGBT SGBDCSGBACSGBL
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
For area out of Singapore please refer to P.i.
For area out of Singapore please refer to P.i.
STRIPPER GUIDE BUSHINGS
SUJ2
58HRC~
Urethane ring
(Devcon adhesive type)
(Press fit type)
58HRC~
SUJ2
(Press fit type)
(Loctite adhesive type)
SUJ2
58HRC~
SUJ2
58HRC~
MoS2(embedded)FC250
FC250MoS2(embedded)
-OIL TYPE / OIL-FREE TYPE-
(Loctite adhesive type)
SUJ2
58HRC~
IOil type
KHow to use urethane ring
IDimensions of attached urethane ring SGBD
IOil-free type
IVolume discount rate
RateQuantity
-
Use the stripper guide bushings at room temperatures(40A or less).
*MoS2(Molybdenum disulfide)is a special solid lubricant which provides outstanding wear resistance.
*Number of outside diameter grooves
(Loctite adhesive type)
(Loctite adhesive type)
(Loctite adhesive type)
(Loctite adhesive type)
45HRC
SUJ2+Copper alloy
45HRC
SUJ2+Copper alloy
ICopper alloy oil type Use the stripper guide bushings at room temperatures(40A or less).
Stripper guide pin
Devcon
Urethane ring provided with SGBD
Delivery
Order
AlterationDays
U/Price
Q'ty:1~9
Q'ty:1~9
U/Price
Q'ty:1~9
U/Price
Q'ty:1~9
U/Price
Q'ty:1~9
U/Price
Put the attached urethane ring to guide pin to prevent Devcon from dropping when adhering
Urethane ring is not provided when LC alteration is required.
50~99
10%1~9 10~49
5%100~200
15%
U/Price
Q'ty:1~9
Q'ty:1~9
U/Price
Q'ty:1~9
U/Price
Q'ty:1~9
U/Price
Changes dimension L(full length)
Days3
T AExpress Express
SGBD:Urethane ring is not provided when LC alteration is required.
LC0.1mm increments
Depending on the position of the solid lubricant, R may become large.
LC0.1mm increments
Machines grooves for Loctite.
Grooves for Loctite are machined on the outside diameter of bushing.
*Number of grooves on the outside diameter.
8.0¯L(LC)̄ 15.9U1
16.0¯L(LC)̄ 24.9U2
25.0¯L(LC)̄ 35.0U3
Straight type/Head type
Not applicable to SGBD,SGBA,SGBH,SGBL and SGBT.
Stocks Availability Subjected to Prior Sales.
¡ Printed in Red ¡ Printed in Blue
volume discount rate is also aAll price &
SGP StockSGP StockPrinted in Red
011-012.ai 5/28/2011 6:46:34 PM
1413
STRIPPER GUIDE BUSHINGS-OIL-FREE TYPE-
LC
RR
LC
30
30
2220
35
35
SGCZ-0.00624 16
-0.007034
28
25
20
D
0
-0.0050
20
16
Catalog No.
Typeh4
d
13
10
13
10 13
3025222016
30
302220
2220
25
25
35
35
35
22
22
16 20
16 20
25
25
L
SGFZ-0.00624 16
-0.007034
28
25
20
D
0
-0.0050
20
16
Catalog No.
Typeh4
d
13
10
13
10 13
3025222016
16
16
30
302220
25
25
35
22
22
16 20
16 20
25
25
L
-0.20
A
L
Dh4
G1.6
-0.03-0.053 D
0.2
-0
.00
8-
0.0
03
d
F0.01 A
0.2
-0.2
D+
2
L
0+0.3
30
Dh4
-0.03-0.053
D
-0
.00
8-
0.0
03
d
A
F0.01 A1.6G
SGFZ 10
Catalog No.
16
L
SGFZ 16
Catalog No.
LC18.0
L(LC) 5
LCLC
30
30
2220
35
35
SGBM-0.00624 16
-0.007034
28
25
20
D
0
-0.0050
20
16
Catalog No.
Typeh4
d
13
10
13
10 13
3025222016
30
302220
2220
25
25
35
35
35
22
22
16 20
16 20
25
25
L
SGHM-0.00624 16
-0.007034
28
25
20
D
0
-0.0050
20
16
Catalog No.
Typeh4
d
13
10
13
10 13
3025222016
30
302220
25
25
35
22
22
16 20
16 20
25
25
L
-0.20
A
L
Dh4
G
-0.03-0.053 D
-0
.00
8-
0.0
03
d
F0.01 A
-0.2
D+
2
L
0+0.3
30
Dh4
-0.03-0.05
3D
-0
.00
8-
0.0
03
d
A
F0.01 AG
G
G
AlterationCode
Spec.
Price
LC DLC
d
10 8.0¯LC<L13 10.0¯LC<L16 13.0¯LC<L20 16.0¯LC<L25 20.0¯LC<L
-0.20
d
10 8.0¯LC<L13 10.0¯LC<L16 13.0¯LC<L20 16.0¯LC<L25 20.0¯LC<L
-0.20
SGHM SGBM SGFZ SGCZ
SGCZ (Loctite adhesive type)
SGFZ (Loctite adhesive type)
Q'ty:1~9
U/Price
Q'ty:1~9U/Price
45HRC
SUJ2+Copper alloy
(embedded)MoS2
LC0.1mm increments
*MoS2 is a special solid lubricant which provides outstanding wear resistance. *SUJ2 and copper alloy are coupled by sintering.
For SGCZ and SGFZ, R may become large
depending on the position of the solid lubricant.
LC0.1mm increments
ICopper alloy oil-free type
SGBM (Loctite adhesive type)
SGHM (Loctite adhesive type)
Special sintered alloy
Q'ty:1~9
U/Price
Q'ty:1~9
Special sintered alloy
ISintered alloy(Dispersed Solid lubricant)oil-free type
Use the stripper guide bushings at room temperatures(40A or less).
Product data P.2
Express ExpressDays
45HRC
SUJ2+Copper alloyMoS2 (embedded)
IVolume discount rate
RateQuantity
-50~99
10%1~9 10~49
5%100~200
15%
Delivery
Order
Alteration
*SUJ2 and copper alloy are coupled by sintering.
*MoS2 is a special solid lubricant which provides outstanding wear resistance.
U/Price
Days3
T A
Changes dimension L(full length)
Depending on the position of the solid lubricant, R may become large.
Machines grooves for Loctite.
Grooves for Loctite are machined on the outside diameter of bushing.
*Number of grooves on the outer diameter.
8.0¯L(LC)̄ 15.9U1
16.0¯L(LC)̄ 24.9U2
25.0¯L(LC)̄ 35.0U3
Straight type/Head type
For area out of Singapore please refer to P.i.
For area out of Singapore please refer to P.i.
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
LC
8
10
13
16
20
25
8
10
13
16
20
25
0-0.2
20.0¯LC<L
25.0¯LC<L
30.0¯LC<L
30.0¯LC<L
35.0¯LC<L
40.0¯LC<L 35.0¯LC<L
25.0¯LC<L
25.0¯LC<L
22.5¯LC<L22.5¯LC<L
17.5¯LC<L
SGBB 20
Catalog No. L
SGBB 16.0Catalog No. 5
LC29.5L(LC)
Alteration
Code
Spec.
LC LC
d d
-0.20
LCLC
SGBB SGBBL SGBBF
SGBBL 20 35
SGBBF 13 LC22.5
LCatalog No.
Catalog No.
Type d
Type dL
16 24 15.67.8 8
2520
25
2530
3030
3035
3540
20 30 16.8 10
25 35 18.5 13
28 37 20.3 16
32 45 25.5 20
38
16
20
25
28
32
38
50
35
49
48
64
60
80
77
99
44
66
5
7
6
8
6
8
7
9
4
68 112
28.0
8.4
9.25
10.15
12.75
14.0 25
8
10
13
16
20
25
5
10
15
5
7.5
6
7
55
66
78
96
112
+0.020
0-0.005
0-0.006
0-0.007
+0.012
+0.015+0.024
+0.017+0.028
n5D
h4D
Dn5
-0.20
L
3-0.03-0.05D
d
S
1.6G1 2
Dh4
-0.20
L
L
3-0.03-0.05D
d
S
1.6G1 2
Dh4
D+
3
-0.20
+0.30
33
-0.03-0.05D
d
S
1.6G1 2
1 23
S
Catalog No.Type d
L
2520
25
2530
3030
3035
3540
16
20
25
28
32
38
35
49
48
64
60
80
77
99
44
66
5
7
6
8
6
8
7
9
4
68 112
8
10
13
16
20
25
10
15
5
7.5
0-0.005
0-0.006
0-0.007
h4D
Price
S
S
P.i
S
Changes dimension L(full length)
LC LC0.1mm increments 0.1mm increments
50~99
10%
IVolume discount rate
RateQuantity 1~9
-10~49
5%100~200
15%
N n
N n
U/Price
Q'ty:1~9
U/PriceQ'ty:1~9
Maximumstroke Number
of rows Number of balls
Number of rows
Number of balls
Maximum stroke (Selection)
SGBB(Press fit type)
SGBBLLoctite
adhesive type
SGBB (Press fit type)
1SUJ22A5052S58HRC~
Since both ends of SGBB are fastened with snap rings, the ball cage does not come off from the main body.
1SUJ22A5052S58HRC~
Since both ends of SGBBL are fastened with snap rings, the ball cage does not come off from the main body.
SGBBF (Loctite adhesive type)
SGBBL (Loctite adhesive type)
1SUJ22A5052S58HRC~
Since both ends of SGBBF are fastened with snap rings, the ball cage does not come off from the main body.
SGBB
SGBB
SGBB13~25
8
10
EEEEEEEE
EE
EEEEE
SGBBL/F
SGBBL/F10~16
SGBBL/F20C25
8
N Number of rows(1EEN)
n Number of balls(1EEn)
Diameter of ballF2.381mm (3/32in.)Diameter of ballF1.588mm (1/16in.)
Diameter of ballF3.175mm (1/8in.)
Diameter of ballF3.0mm
Diameter of ballF2.0mm
Diameter of ballF1.5mm
1Insert the pin in the bushing fixed in the stripper plate.
23Push the pin down to the bottom dead center as the pin
and the bushing are interference fit of 2Om to 20Om.
Maximum stroke=SM2
Dimension S is{S-(L-LC)}(S˘2.5)
N n U/PriceQ'ty:1~9
Number of rows
Number of balls (Selection)
SGBBFLoctite
adhesive type
Maximum stroke
Dimension S is{S-(L-LC)}(S˘2.5)
IBall cage integrated type
Express Express
Delivery
Order
Example
DaysAlteration
Days3
T A
STRIPPER GUIDE BUSHINGS-BALL CAGE INTEGRATED TYPE-
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
For area out of Singapore please refer to P.i.
For area out of Singapore please refer to P.i.
¡ Printed in Red ¡ Printed in Blue
Stocks Availability Subjected to Prior Sales.Stocks Availability Subjected to Prior Sales.
No
volume discount rate is also aAll price &
SGP StockSGP StockPrinted in Red
Cn
volume discount rate is also aAll price &
SGP StockSGP StockPrinted in Red
¡ Printed in Red ¡ Printed in Blue
013-014.ai 5/28/2011 10:56:20 AM
Available in stock now for all sizes.Available in stock now for all sizes.
1615
DdCatalog No.
Type PDL
18
22
26
31
37
14
17
20
26
31
SGBBS
10
13
16
20
25
20
20
25
25
25
30
30
30
30
35
35
35
40
40
-0.0060
-0.0050
-0.0070
h4
DdCatalog No.
Type PDL
18
22
26
31
37
14
17
20
26
31
SGBBH
10
13
16
20
25
20
20
25
25
25
25
25
30
30
30
30
35
35
35
40
40
-0.0060
-0.0050
-0.0070
h4
DdCatalog No.
Type PDL
28
34
40
20
26
31
SGBBW16
20
25
35 40
40 45 50
45 50 60
-0.0050
2417 13 30 35D+
3
-0.20
L
3+0.3
0 3-0.05-0.03
D
Dh4
F0.01 A
-0
.02
5
0.2
-0
.03
0d
A
1.6G
0-0.2L
0.2
-0
.03
0-
0.0
25
L14
d
Dh4
A3 -0.05
-0.03D
1.6G
F0.01 A
1.6G
0.2
3
0-
0.0
05
D
-0
.02
5-
0.0
29
d
0-0.2
668
L-0.03-0.05DA
AF0.01
SGBBW 16
Catalog No.
35
L
SGBBW
SGBBSSGBBH
LC
16
20
25
10
13
16
20
25
0-0.2
30.0¯LC<L
35.0¯LC<L
40.0¯LC<L 30.0¯LC<L
20.0¯LC<L
20.0¯LC<L
15.0¯LC<L
15.0¯LC<L
SGBBH 16
Catalog No.
LC25.5
L(LC)
AlterationCode
Spec.
Price
LC LC DLC
PD
PD
-0.20
LCLC
SGBBW SGBBS SGBBH
13 25.0¯LC<L
SGBBF
BSWP
SGBBS
MBSHCMBJHSGBBW
MBSHCMBJH
SGBBW
5
SGBBW (Thick Wall, Loctite adhesive type)
SGBBH (Loctite adhesive type)
SGBBS (Loctite adhesive type)
SUJ2
58HRC~
SUJ2
58HRC~
SUJ2
58HRC~
U/Price
Q'ty:1~9
U/Price
Q'ty:1~9
U/Price
Q'ty:1~9
STRIPPER GUIDE BUSHINGS-FOR BALL BEARING-
50~99
10%
IVolume discount rate
RateQuantity 1~9
-10~49
5%100~200
15%
Thick wall results in a
higher level of rigidity.
All stripper guide pins
can be coupled with.
(Same in SGBBW.)
IFeatures
LC0.1mm increments
LC0.1mm increments
Order
AlterationT ADays Express Express
Example
Delivery
SGPN ,etc.
SGPWH ,etc.
Changes dimension L(full length) Machines grooves for Loctite.
Grooves for Loctite are made on the outside
diameter of bushing.
Not applicable to SGBBW and SGBBS.
*Number of outer diameter grooves
8.0¯L(LC)̄ 15.9U1
16.0¯L(LC)̄ 24.9U2
25.0¯L(LC)̄ 35.0U3
syaD3
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
For area out of Singapore please refer to P.i.
For area out of Singapore please refer to P.i.
Stocks Availability Subjected to Prior Sales.
1 2
DCatalog No.
Type PD MBSH MBJHL
10.3
13.3
16.3
20.5
25.5
2
2
2
3
3
13.7
16.7
19.7
25.5
30.5
10
13
16
20
25
25
25
30
30
30
35
35
35
3530
35
40
40
40
45
45 50
D1
3 d
PDD
1D
L
MBJH 20
Catalog No.
45
LLC 42MBJH 20
L(LC)Catalog No.
Alteration Code Spec.
LCLC
DCatalog No.
Typed
PD
13
10
18.3
11.7
14.9
16.5
10.5
13.5
0.8
0.6
0.7
12
6
5
30~90
30~80
30~80
16
22.5 20.5 1.0 14 35~9020
27.9 25.5 1.2 14 40~9025
P
Catalog No.
BSWP 20
FL
80
Type PD30
10
BSWP
13
16
20
25
35 40 45 50 55 60 65 70 75 80 85 904.8 7.26.05.4 6.6 7.8 9.08.4 10.29.6 10.8
6 616 91214 11 9 78 7
10.1 10.74.9 7.26.15.4 6.6 7.8 8.98.4 9.6
17
-
3.2 4.23.73.4 4.0 4.5 5.04.8 6.15.65.3 5.8 6.4
-
--101315 11 9 88 77 6
-5.65.04.7 5.3 5.8 6.56.0 8.17.47.0 7.7 8.5
32 202326 22 19 1516 121314 12 11
283540 31 26 2223 161920 18 15
- -6.66.0 6.3 7.0 7.97.4 9.38.78.4 9.0 9.6
3038 34 28 2425 182022 19 17
1D
PD
FLP d
D1
D
Price
5
BALL BEARING CAGES / SPRINGS FOR BALL CAGE
1 MBSH2 MBJH
(High rigidity aluminum ball cage)
(High rigidity resin ball cage)
1A5052S(Aluminum)2POM(Polyacetal resin)3SUJ2 Sphericity pressure 0.25Om
362~67HRC
Diameter of ball d
U/Price Q'ty:1~9
MBSH
MBJH(Aluminum)
(Resin)
20¯LC<L
Changes dimension L(full length)1mm increments
Ball holes may remain
on the cut surface.15%30~50
-
IVolume discount rateQuantity
Rate20~2910~191~9
5% 10%
SWP-B
U/PriceFL5mm increments
BSWP(For Ball cage)
Spring solid height (mm) / Spring constant (g/mm)FL(Free length)
BSWP (Springs for ball cage)
(Free length)
IVolume discount rate
RateQuantity 1~9
-10~20
5%
Delivery
Order
Days
Alteration
AExpress
Delivery
Order
5
AT
Days
Express
Express
Q'ty:1~9
Upper row: Solid height
Lower row: Spring constant
¡ MBSH MBJH
syaD3
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
Cvolume discount rate is also ap
All price &
AGE SGP StockSGP StockPrinted in Red
For area out of Singapore please refer to P.i.
For area out of Singapore please refer to P.i.
For area out of Singapore please refer to P.i.
Stocks Availability Subjected to Prior Sales.
¡ Printed in Red ¡ Printed in Blue
¡ Printed in Blue
t l N
volume discount rate is also aAll price &
SGP StockSGP StockPrinted in Red
015-016.ai 5/28/2011 10:59:51 AM