Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
The reusable test gate allows the
system to be pressure tested
through the Adapt-A-Valve.
Eliminates expensive and
dangerously over-inflated test
balls or other test devices.
The Adapt-A-Valve
allows for interior or
exterior installations at
any depth eliminating
manholes or expensive
vaults. The lightweight
gate can be easily
removed for servicing at
ground level.
PART # TYPE SIZE
PA-3CASS01-NO OPEN 3”
PA-3CASS01-NC CLOSED 3”
PA-4CASS01-NO OPEN 4”
PA-4CASS01-NC CLOSED 4” PART # MATERIAL SIZE
ML-3XA ABS 3” DWV
ML-3XP PVC 3” DWV
ML-4XA ABS 4” DWV
ML-4XP PVC 4” DWV
3 INCH 4 INCH
A 3” 4”
B 4” 6”
C 7 “ 9 7/8”
D 7 ½ “ 9 ½ “
Z1 1 ¼ “ 1 ¾ “
PART # SIZE
ML-4TZ 4”
ML-3TZ 3”
PART # MATERIAL SIZE
ML4-FCA-DWV ABS 4” DWV
ML4-FCP-DWV PVC 4” DWV
ML6-FCA-DWV ABS 6” DWV
ML6-FCP-DWV PVC 6” DWV
ML6-FCP-SDR PVC 6” SDR
BACKWATER VALVE CASSETTE
TEST GATE
DIMENSIONS
The Adapt-A-Valve cassette
features the lightest gate in the
industry offering next-to-no flow
restriction. The cassette comes in
two configurations either normally
closed or normally open.
Interior or Exterior Applications
FLUSH CAP CLEANOUT
The Flush Cap cleanout is an
internal fitting cap that allows
for a completely flush finish on
exterior and interior
installations. They provide a
sealed access point to the
plumbing system and eliminate
the need for access boxes or
openings in the floor.
Extendable Backwater Valve
12530-128 Street NW Edmonton, AB, Canada T5L 1C8 Toll Free: 1-877-734-8691 Email: [email protected]
www.backwatervalve.com
*Cassette gate extendable with standard ¾“ pipe
*Cassette included with valve (normally open or normally closed)