Excellence Pumps

Our products

Excellence International Industrial Co., Ltd.

Slurry Pump Business

http://www.go2pdf.com

- 2 -24 Excellence International Industrial Co., Ltd. (Beijing branch)No. 78, Dongsihuan Road, Beijing, China 100022

Tel: 0086-10-81107022 Fax: 0086-10-81107016Email: [email protected]

Excellence Pump Industry Co., Ltd. Tel: 0086-311-83862919(Headquarter and production base) Fax: 0086-311-83862516No. 368, Xinshi North Road, mail: [email protected], Heibei, www.excellencepump.comChina 050091

- 2 -

Our concept

To the staff:We offer the platform and give them free space to explore their personal valueand improve themselves step by step with the company's development.

To the team:The team members work with each other closely and efficiently to get the bigwisdom, power and progress. They treat work strictly as military, and treat eachother warmly as one family.

To clients:They are our business partners and friends. We offer them high-valuedservice by our heart. Sincerity and honesty is the first principle to the clients.

To the society:We are aiming at promoting its harmony and development. We are active inpositive society reformation and in wealth accumulation of both spirit andsubstance.

To the nature:We respect and love the nature, the same with the life, which is our basic valueview.

http://www.excellencepump.com





- 3 -

Products Introduction

With the development of decades of years, we have formed the complete slurrypump arranges, applied in mining and minerals, power plant, metallurgy,chemical industry, petroleum, dredging, sewage water and dewateringprojects.

Series EHM transporting the strong abrasive slurry with high concentration,PH 5-12, metal lined.

Series EHR transporting the abrasive corrosive slurry with high concentration,rubber lined.

Series EGM delivering the abrasive slurry to reach the high head, PH 5-12metal lined.

Series EMM delivering the slurry with middle concentration, PH 5-12, metallined.

Series ELM transporting the slurry with low concentration, PH 5-12, metallined (also corrosive slurry with rubber lined).

Series ES(G) transporting the sand or pebble s or applied with big capacity withhigh head and single casing constructure.

Series EVM delivering the slurry from the pond, being installed vertically,working under the slurry.

Series EZG delivering the slurry with high concentration with the high head.

Series EZJV transporting the slurry with middle and low concentration withthe high head.






- 4 -

EHM series

Introduction

The frame plate liners for EHM series pumpshave replaceable wear-resistant metal liners.The impellers are made of wear-resistantmetal. The frame plate liner and impeller forEHM pump are adoptable of hard metal only.

Bearing assembly use cylindrical structure,which helps adjust the space between impeller and cover plate liner easily, andbeing removed completely when being repaired. Bearings use greaselubrication.

The shaft seal could use the packing seal, centrifugal seal and mechanical seal.The discharge side can be positioned at intervals of 45degrees by request andoriented to any eight positions to suit installations and applications.

Here are the drive types, such as V belt drive, gear reducer drive, fluid couplingdrive, and frequency conversion drive devices.

Wide performance, good NPSH and high efficiency, the pump of this type may beinstalled in multistage series to meet the delivery for long distance.

Application

The type of EHM pumps are using for handingstrong abrasive, high density slurries and lowdensity, high head slurries in the metallurgical,mining, coal, power, building material and otherindustrial departments etc.

For example: Coal washery processing, handlingwith the fine ore and tailings in metal mine,handing combined bottom and fly ash in athermal power station.






- 5 -

Model Explanation

EHM-4DE: ExcellenceH: High concentrationM: Metal lined4: Discharge size (inch)D: Frame type with maximum power

EHM Series Slurry Pump Performance Chart

PumpModel

AllowableMax. ower

(kw)

Clear Water Performance

Capacity Q HeadH(m)

Speedn(r/min)

Max.Eff.¦Ç%

NPSH(m)

ImpellerDia.(mm)m3/h l/s

EHM-1B 15 12.6-28.8 3.5-8 6-68 1200-3800 40 2-4 152EHM-1.5B 15 32.4-72 9-20 6-58 1200-3200 45 3.5-8 184EHM-2C 30 39.6-86.4 11-24 12-64 1300-2700 55 4-6 214EHM-3C 30

86.4-198 24-55 9-52 1000-2200 71 4-6 245EHM-3D 60EHM-4D 60

162-360 45-100 12-56 800-1550 65 5-8 365EHM-4E 120EHM-6E 120

360-828 100-230 10-61 500-1140 72 2-9 510EHM-6R 300EHM-8ST 560 612-1368 170-380 11-61 400-850 71 4-10 686EHM-10ST 560 936-1980 260-550 7-68 300-800 82 6 762EHM-12ST 560 1260-2772 350-770 13-63 300-600 77 3-10 965EHM-14TU 1200 1368-3060 380-850 11-63 250-550 79 4-10 1067

Note:1. Quantity range recommended: 50%Q’≤Q≤110%Q' (Q' Appropriate to capacity at highest efficiency point).2. NPSH: appropriate to point Q recommended at highest speed.






- 6 -

EHR series

Introduction

The frame plate liners for EHR seriespumps have replaceable wear-resistantrubber liners. The impellers are made ofnatural rubber liners. It has nearly thesame constructure with EHM.

Application

The type of EHR pumps are also usingfor handing strong abrasive, highdensity slurries and low density, highhead slurries in the metallurgical,mining, coal, power, building materialand other industrial departments etc. Itis suitable for the corrosive slurryusually. In some ore dressing, somebigger EHR series pump also would beused to transport the fine ore or tailingswith weak abrasion.

Model Explanation

EHR-4DE: ExcellenceH: High concentrationR: Rubber lined4: Discharge size (inch)D: Frame type with maximum power






- 7 -

EHR Series Slurry Pump Performance Chart

PumpModel

AllowableMax. Power

(kw)


Capacity Q HeadH(m)

Speedn(r/min)

Max.Eff.¦Ç%

NPSH(m)


EHR-1B 15 10.8-25.2 3-7 7-52 1400-3400 35EHR-1.5B 15 25.2-54 7-15 5.5-41 1000-2600 50 2.5-5 178EHR-2C 30 36-75.6 10-21 13-39 1300-2100 2-4 213EHR-3C 30

79.2-180 22-50 5-34.5 800-1800 59 3-5 245EHR-3D 60EHR-4D 60

144-324 40-90 12-45 800-1350 65 3-5 365EHR-4E 120EHR-6E 120

324-720 90-200 7-49 400-1000 65 5-10 510EHR-6R 300EHR-8ST 560 540-1188 150-330 12-50 400-750 75 4-12EHR-10ST 560 720-1620 200-450 7-45 300-650 80 2.5-7.5EHR-12ST 560 1152-2520 320-700 13-14 300-500 79 3-8EHR-14TU 1200 1368-3060 380-850 11-63 250-550 79 4-10 1067







- 8 -

EGM series

Introduction

Type EGM slurry pumps are cantilevered, horizontal, centrifugal slurry pumps.The frame plate liner and impeller for EGM pump are made of wear-resistantmetal. The shaft seals for the EGM series may choose gland seal or expeller seal.The discharge branch can be oriented to any of the eight positions to suitinstallations and applications.

Application

They are designed for the handling of highly abrasive, high density slurries inthe metallurgical, mining, coal, power generation, construction material andother industry. The pumps of this type may also be installed in multistageseries.

Model Explanation

EGM-4FE: ExcellenceG: High headM: Metal lined4: Discharge size (inch)F: Frame type with maximum power






- 9 -

EGM Series Slurry Pump Performance Chart

PumpModel

AllowableMax. Power

(kw)


Capacity Q HeadH(m)

Speedn(r/min)

Max.Eff.¦Ç%

NPSH(m)


EGM-1C 30 16.2-34.2 4.5-9.5 25-92 1400-2200 20 2-5.5 330EGM-2D 60 68.4-137 19-38 25-87 850-1400 47 3-7.5 457EGM-3E 120 126-252 35-70 12-97 600-1400 50 2-5 508EGM-4F 260 324-720 90-200 30-118 600-1000 64 3-8 711EGM-6S 560 468-1008 130-280 20-94 500-1000 65 4-12 711







- 10 -

EMM series

Introduction

Series EMM pumps are cantilevered, horizontal,centrifugal, slurry pumps. Series EMM pumpsare adopted high speed operating and so theyhave small volumes saving floor area. Thedischarge position by request may be rotated 8different angles at internal of 45 degrees forinstallation and application.

Application

They are suitable for delivering middle abrasive, middle-density slurries formetallurgical, mining, coal and build material departments. The shaft seal isadopted both gland seal and centrifugal seal.

Model Explanation

EMM-8EE: ExcellenceM: Low concentrationM: Metal lined8: Discharge size (inch)E: Frame type with maximum power

EMM Series Slurry Pump Performance Chart

PumpModel

AllowableMax.

Power(kw)


Capacity Q HeadH(m)

Speedn(r/min)

Max.Eff.¦Ç%

NPSH(m)


EMM-8E 120540-1440 150-400 14-60 600-1000 73 4-10 549

EMM-8R 300Note:1. Quantity range recommended: 50%Q’≤Q≤110%Q' (Q' Appropriate to capacity at highest efficiencypoint).2. NPSH: appropriate to point Q recommended at highest speed.






- 11 -

ELM(R) series

Introduction

Type ELM(R) pumps are cantilevered,horizontal, centrifugal, slurry pumps. SeriesELM(R) pumps are adopted high speedoperating and so they have small volumessaving floor area. The frame plates havechangeable, wear-resistant, metal liners orrubber liners and the impellers are made of

wear-resistant metal or rubber (Rubber for frame plates, impellers of pumpswith discharge Dia. (mm) above 550mm.)The discharge position by requestmay be rotated 8 different angles at internal of 45 degrees for installation andapplication.

Application

They are suitable for delivering low abrasive,low-density slurries for metallurgical,mining, coal and build material departments.The shaft seal is adopted both gland sealand centrifugal seal.

Model Explanation

ELM(R)-75CE: ExcellenceL: Low concentrationM: Metal linedR: Rubber lined

75: Discharge size (mm)C: Frame type with maximum power






- 12 -

ELM(R) Series Slurry Pump Performance Chart

PumpModel

AllowableMax.

Power(kw)


Capacity Q HeadH(m)

Speedn(r/min)

Max. Eff.¦Ç%

NPSH(m)


ELM-20A 7.5 1.8-9 0.5-2.5 7-35.5 1400-3000 40 2.5-3 152ELM-50B 15 11.5-65 3.2-18 8.5-46 1400-2800 62 2.5-5.5 190ELR-50B 15 9-61 2.5-17 3-32.4 1200-2600 48 2.75-4.5 190ELM-75C 30 21.6-137 6-38 7-46.4 900-2400 57 3-6 229ELR-75C 30 28.8-155 8-43 9-43 1100-2300 60 3-5 229

ELM-100D 60 46.8-324 13-90 7-48.3 800-1800 64 2.5-6 305ELR-100D 60 54-288 15-80 12-38 800-1600 65 2.5-5.5 305ELM-150E 120 126-569 35-158 10.5-52 800-1500 60 2.5-6 381ELR-150E 120 72-576 20-160 4-38 800-1300 65 2.5-5.5 381ELM-200E 120 72-1080 20-300 8-45 500-1100 74 3-6 457ELM-250E 120 144-1800 40-500 6-48 500-1000 73 3-10 550ELM-300S 560 568-2538 130-705 8-60 400-950 79 2-10 653ELR-300S 560 432-1900 120-528 7-41 400-800 81 3-8 653ELM-350S 560 650-2800 180-780 10-59 400-840 81 3-10 736ELR-350S 560 720-2844 200-790 10-41 400-700 86 3-7 736ELM-400S 560 756-3312 210-920 7-37.5 300-600 85 2-8 825ELR-400S 560 720-3312 200-920 7-51 300-700 80 2-10 825

ELM-450ST 560 1080-4356 300-1210 9-40 300-550 87 3-10 933ELR-450ST 560 1008-4356 280-1210 9-48 300-600 80 2-9 933ELM-550TU 1200 1980-7920 560-2200 10-50 250-475 86 4-10 1213







- 13 -

ES(G) pump

Introduction

ES (G) series gravel pumps are horizontaland single-casing centrifugal pumps. Thetype ES (G) pumps are of high-head ones.Construction of this pump is of single casingconnected by means of clamp bands and widewet-passage. The wet-parts are made ofNi-hard and high-chrome wear-resistantalloys. The discharge direction of pump can be oriented in any direction of 360.This type of pump owns the advantages of easy installation, good performanceof NPSH and wear-resistance.

Application

Gravel pumps are designed for continuously handlingthe most difficult higher abrasive slurries, whichcontain too big solids, to be pumped by common pumps.They are suitable for delivering slurries in mining,explosive -sludge in metal melting, dredging in dredgerand course of rivers, and other fields.

Model Explanation

ES (G) - 8SE: ExcellenceS: SandG: High head8: Discharge size (inch)S: Frame type with maximum power






- 14 -

PumpModel

AllowableMax. ower

(kw)


Capacity Q HeadH(m)

Speedn(r/min)

Max.Eff.¦Ç%

NPSH(m)

ImpellerDia.m3/h l/s

ES-4D 60 36-250 10-70 5-52 600-1400 58 2.5-3.5 378ES-6E 120 126-576 35-160 6-45 800-1400 60 3-4.5 378ES-8S 560 216-936 60-260 8-52 500-1000 65 3-7.5 533

ESG-8S 560 180-1440 50-400 24-80 500-950 72 2.5-5 711ES-10G 600 360-1440 100-400 10-60 400-850 65 1.5-4.5 667

ESG-10TU 1200 288-2808 80-780 16-80 350-700 73 2-10 950ES-12TU 1200 576-3024 160-840 8-70 300-700 68 2-8 864ES-14G 600 720-3600 200-1000 18-44 300-500 70 3-9 1016

ESG-14TU 1200 324-3600 90-1000 26-70 300-500 72 3-6 1270ES-16TU 1200 720-4320 200-1200 12-48 250-500 72 3-6 1067


ES(G) Series Slurry Pump Performance Chart






- 15 -

EVM(R) series

Introduction

Type EVM(R) pumps are vertical, centrifugal slurry pumps submerged in sumpto work. These pumps have no need of any shaft seal and sealing water. Theycan also be operated normally for insufficient suction duties.

The pump casing of type EVM(R) pumps aremade of wear-resistant metal and theimpellers are made of wear rubber orpoyure. According to liquid surface of theslurry pool, the pump transmission shaftand suction pipe could be chosen. Thepump could operate under the best

condition with different speed.

Application

They are designed for delivering abrasive, large particleand high-density slurries and applied over the fields suchas metallurgy, mining, coal, power, building materials,and environmental protection.

Model Explanation

EVM(R)-65QE: ExcellenceV: Vertical typeM: Metal lined R: Rubber lined

65: Discharge size (mm)Q: Frame Type with maximum power






- 16 -

EVM(R) Series Slurry Sump Pump Performance Chart

PumpModel

AllowableMax.

Power(kw)


Capacity Q HeadH(m)

Speedn(r/min)

Max.Eff.¦Ç%

ImpellerDia.m3/h l/s

EVM(R)-40P 15 17-43.2 4.7-12 4-28.5 1000-2200 40 188EVM(R)-65Q 30 18-114 5-32 5-31.5 750-1500 60 280EVM(R)-100R 75 54-289 15-80 5-36 500-1200 62 370EVM(R)-150S 110 108-479 30-133 8.5-40 500-1000 52 450EVM(R)-200S 110 189-891 52.5-247.5 6.5-37 400-850 64 520EVM(R)-250T 200 360-1152 100-320 7-33 400-750 60 575EVM(R)-300T 200 540-1548 150-430 5.5-26 350-700 60 580







- 17 -

EZG(S) series

Introduction

In order to meet the requirements on thedevelopment of mining, the power plant,metallurgy and coal industries, our workshas designed and developed Series EZG(S)Generation Slurry Pump with large capacity,high head, multi-stages with experience ofslurry pump design and manufacture formany years, and absorbing the researchresults of advanced technology from homeand abroad.

Application

It can be widely used for handling the mixture ofabrasive and corrosive solids in power, metallurgy,coal, building materials, chemical industrydepartments, especially for removing ash and sludgein power plant.

Model Explanation

EZG(S)65E: ExcellenceZ: SlurryG: High headS: Run in series65: Discharge size (mm)






- 18 -

EZG(S) Series Slurry Pump Performance Chart （1）

PumpModel

AllowableMax. Power

Clear Water Performance Impel.Dia.(mm)

CapacityQ

HeadH(m)

Speedr/m

Effi.¦Ç%

NPSH(m)

EZG(S)6528.8-19.9 31.7-15.8 58-61 1480 62.5-47.4 4.5-3.0

3908.37-5.8 21.0-10.5 25.4-26.7 980 62.5-47.4 2.0-1.3

EZG(S)80

73.7-52.2 56.7-28.3 87.5-91.6 980 66.1-48.7 5.2-2.7485

21.4-15.2 37.5-18.8 38.4-40.2 740 66.1-48.7 2.3-1.256.8-40.4 52.0-26.0 73.7-77.1 980 66.1-48.7 4.4-2.3

44516.5-11.7 34.4-17.2 32.3-33.8 740 66.1-48.7 1.9-1.041.3-29.2 46.8-23.3 59.5-62.3 980 66.1-48.7 3.5-1.8

40012.0-8.4 31.0-15.4 26.1-27.3 740 66.1-48.7 1.5-0.8

EZG(S)100

124.9-91.4 116.7-58.3 85.1-91.8 1480 77.9-57.4 6.0-2.6500

36.3-26.6 77.3-38.6 37.3-40.3 980 77.9-57.4 2.7-1.291.0-66.7 105-52.5 68.9-78.4 1480 77.9-57.4 4.9-2.1

45026.4-19.4 69.5-34.8 30.2-32.6 980 77.9-57.4 2.1-1.164.0-46.9 93.4-46.7 54.5-58.8 1480 77.9-57.4 3.8-1.7

40018.6-13.6 61.8-30.9 23.9-25.8 980 77.9-57.4 1.7-0.8

EZG(S)150

215.0-165.5 200-100 85.2-90.0 980 77.7-53.3 3.8-2.7740

92.7-71.3 151.2-75.6 48.6-51.3 740 77.7-53.3 2.2-1.5168.0-129.3 182.4-91.2 73.0-77.1 980 77.7-53.3 3.3-2.3

68574.2-56.8 140.0-70.2 41.6-44.0 740 77.7-53.3 1.9-1.3

131.9-101.5 169.2-84.6 61.8-65.2 980 77.7-53.3 2.8-1.1630

57.6-44.3 129.6-64.8 35.2-37.2 740 77.7-53.3 1.6-0.6

EZG(S)200

342.9-219.1 300.0-150.0 89.0-94.2 980 76.3-63.2 6.7-2.7740

147.5-97.3 226.5-113.3 50.7-53.7 740 76.3-63.2 3.8-1.5290.2-185.8 283.8-141.9 79.6-84.3 980 76.3-63.2 6.0-2.4

700125.0-80.0 214.3-107.1 45.4-48.1 740 76.3-63.2 3.4-1.4

222.0-141.8 259.5-129.7 66.6-70.5 980 76.3-63.2 5.0-2.0640

95.6-61.0 195.9-97.9 38.0-40.2 740 76.3-63.2 2.9-1.1

EZG(S)250

421.2-275.6 400.0-200.0 84.0-90.1 980 78.2-63.2 7.3-3.3740

181.4-118.7 302.0-151.0 47.9-51.4 740 78.2-63.2 4.2-1.9356.7-233.2 378.4-189.2 75.2-80.6 980 78.2-63.2 7.1-3.0

700153.7-100.5 285.7-142.9 42.9-46.0 740 78.2-63.2 4.0-1.7278.8-137.9 348.6-131.6 63.8-68.5 980 78.2-63.2 5.5-2.5

645120.1-59.4 263.2-99.4 36.4-39.1 740 78.2-63.2 3.1-1.4






- 19 -

EZG(S) Series Slurry Pump Performance Chart （2）

Note:1. Quantity range recommended: 50%Q’≤Q≤110%Q' (Q' Appropriate to capacity athighest efficiency point).2. NPSH: appropriate to point Q recommended at highest speed.

PumpModel

AllowableMax. Power

Clear Water PerformanceImpel.

Dia.(mm)CapacityQ

HeadH(m)

Speedr/m

Effi.¦Ç%

NPSH(m)

EZG(S)300

542.8-357.6 533.3-266.7 84.3-93.4 980 81.2-68.3 6.9-3.5760

233.9-154.0 402.7-201.3 48.1-53.3 740 81.2-68.3 3.9-2.0429.4-282.9 493.3-246.7 72.1-79.9 980 81.2-68.3 5.9-3.0

703184.8-116.4 372.5-177.9 41.1-45.6 740 81.2-68.3 3.4-1.7333.3-219.7 453.3-226.7 60.9-67.5 980 81.2-68.3 5.0-2.5 646






- 20 -

EZJ series

Introduction

With the development of the technology, ourcompany has introduced the series EZJ slurrypump under the theory of modern fluidmechanics, based on the software design andpractical experiences. The EZJ series slurry

pumps are designed as single-stage, single-suction centrifugal pumps. They areclassified into the horizontal type (EZJ type) and vertical type (EZJV type)according to construction. The pumps are innovative in both hydraulic andstructural design. The wet parts are made from high-chrome alloy with highwear-resistance. They are of energy- saving, high efficiency, little vibration, lownoise, long service, lightweight, reliable operation and easy maintenance.

Application

The EZJ series slurry pumps are widely usedin power plant, metallurgical, mining, coal,etc. which are suitable for handling abrasiveand corrosive slurries with maximumconcentrations of wt.45% (ash) and wt.60%(ore) such as the fine ore and tailings inmining, removing ash in power plant and

delivering coal tailings. The pumps can be operated in series according tospecial requirements.

Model Explanation

80EZJ (V)-A42E: ExcellenceZJ: SlurryV: Vertical type80: Discharge size (mm)A: 5 B: 4 C: 3 (the number of the vanes of the impeller)42: The diameter of the impeller






- 21 -

EZJ Series Slurry Pump Performance Chart (1)

Pump Model

AllowableMax.

Power(kw)

Performance in Clear Water Max.Diameterof Particle

CapacityHead

SpeedEffi. NPSH

Q(m3/h) H(m) n(rpm) % (m) (mm)

EZJ300－A100 450 464～1826 15.3～65.2 300～590 81.1 3 88EZJ300－A95 400 441～1735 13.8～58.8 300～590 78.1 3 88EZJ300－A90 560 505～1844 21.2～79.9 400～730 82.8 3.9 85EZJ300－A85 450 477～1742 18.9～71.3 400～730 79.8 3.8 85EZJ300－A70 630 635～2333 16.0～76.8 490～980 80.4 3.9 92EZJ300－A65 500 589～2166 13.8～66.2 490～980 77.4 3.7 92EZJ300－A56 250 395～1568 9.7～46.0 490～980 80.9 3.5 96EZJ250－A103 560 402～1573 29.7～110.5 400～730 74.5 2.8 69EZJ250－A96 560 403～1466 25.4～93.7 400～730 77.8 3.5 69EZJ250－A90 450 378～1374 22.3～82.4 400～730 73.8 3.4 69EZJ250－A85 800 376～1504 30.1～128.7 490～980 76.5 3.5 76EZJ250－A83 800 367～1469 28.7～122.7 490～980 75.5 3.5 76EZJ250－A80 710 354～1416 26.7～114.0 490～980 73.5 3.4 76EZJ250－A78 630 415～1796 21.1～102.5 490～980 71.5 3.2 76EZJ250－A75 560 300～1480 20.8～97.5 490～980 77.5 3 72EZJ250－A73 500 292～1441 19.7～92.4 490～980 76.5 3 72EZJ250－A70 450 280～1381 18.1～84.9 490～980 74.5 2.9 72EZJ250－A68 450 272～1342 17.1～80.1 490～980 73.5 2.7 72EZJ250－A65 315 299～1249 15.4～71.0 490～980 76.9 3 72EZJ250－A63 315 290～1211 14.4～66.7 490～980 75.9 3 72EZJ250－A60 280 276～1153 13.1～60.5 490～980 73.9 2.8 72

Note:1. Quantity range recommended: 50%Q’≤Q≤110%Q' (Q' Appropriate to capacity at

highest efficiency point).2. NPSH: appropriate to point Q recommended at highest speed.






- 22 -


Pump ModelAllowable

Max. Power(kw)


CapacityHead

SpeedEffi. NPSH


EZJ200－A85 560 221～907 32.0～133.7 490～980 70.5 2.8 54EZJ200－A75 355 225～900 22.8～102.9 490～980 74.1 3 56EZJ200－A73 355 219～876 21.6～97.5 490～980 73.1 3 56EZJ200－A70 315 205～976 19.4～86.4 490～980 75.6 2.8 56EZJ200－A68 315 199～948 18.3～81.5 490～980 74.6 2.8 56EZJ200－A65 250 235～950 16.4～72.0 490～980 79.6 2.5 62EZJ200－A63 250 228～921 15.4～67.6 490～980 78.6 2.5 62EZJ200－A60 185 218～870 13.9～62.0 490～980 83.5 2.5 62EZJ200－A58 185 211～841 13.0～57.9 490～980 82.5 2.5 62EZJ150－A70 185 93～401 20.0～91.2 490～980 62.3 2 37EZJ150－A65 200 150～600 17.4～75.7 490～980 70.8 2.5 48EZJ150－A63 185 146～582 16.3～71.1 490～980 69.8 2.5 48EZJ150－A60 160 135～550 14.7～63.5 490～980 75.9 2.5 48EZJ150－A58 132 131～532 13.7～59.3 490～980 74.9 2.5 48EZJ150－A55 110 124～504 12.3～53.4 490～980 72.9 2.3 48EZJ150－C58 160 134～596 12.8～61.0 490～980 69.1 2 75EZJ150－A57 110 95～427 13.2～56.3 490～980 67.8 1.8 32EZJ150－A50 75 115～460 9.5～43.1 490～980 76.8 2.5 48EZJ150－A48 75 111～442 8.7～39.7 490～980 75.8 2.5 48EZJ150－C42 132 142～550 12.1～62.8 700～1480 77.1 2.2 69EZJ100－A50 160 85～360 20.5～100.2 700～1480 69.6 2.5 34EZJ100－A46 132 79～331 17.3～84.8 700～1480 67.6 2.3 34EZJ100－A42 90 66～275 14.7～70.8 700～1480 71 2.5 35EZJ100－A39 75 61～255 12.6～61.0 700～1480 69 2.4 35EZJ100－B42 75 83～365 12.7～66.8 700～1480 63.2 2.5 18EZJ100－A36 55 61～245 9.7～49.5 700～1480 71.6 2 32EZJ100－A33 45 56～225 8.2～41.6 700～1480 69.6 1.8 32

Note:1. Quantity range recommended: 50%Q’≤Q≤110%Q' (Q' Appropriate to capacity athighest efficiency point).2. NPSH: appropriate to point Q recommended at highest speed.






- 23 -


Pump Model

AllowableMax.

Power(kw)


CapacityHead

SpeedEffi. NPSH


EZJ80－A52 160 51～242 22.1～109.8 700～1480 56.3 2.1 21EZJ80－A42 75 61～204 14.4～70.4 700～1480 66.7 2.5 24EZJ80－A39 55 57～189 12.4～60.7 700～1480 64.7 2.4 24EZJ80－A36 45 46～190 9.6～51.4 700～1480 67.7 2.5 24EZJ80－A33 37 43～174 8.0～43.2 700～1480 65.7 2.3 24EZJ65－A30 15 23～79 7.4～34.8 700～1460 63.5 2 19EZJ65－A27 11 20～71 6.0～28.2 700～1460 61.5 1.8 19EZJ50－A50 90 27～111 22.3～110.7 700～1480 45.1 3 13EZJ50－A46 55 23～94 17.9～85.8 700～1480 44.7 1.4 14EZJ50－A33 18.5 12～54 7.7～42.5 700～1480 42.1 2.9 13ESJ40－A17 7.5 4～23 9.0～44.6 1400～2900 52.4 2.5 11

EZJV150－A35 37 99～364 3.0～17.9 490～980 69 15EZJV100－A34 45 74～293 5.5～36.8 700～1480 65.8 14EZJV80－A36 45 50～201 7.3～45.5 700～1480 58.2 12EZJV65－A30 18.5 18～98 5.9～34.7 700～1470 53.7 8EZJV50－A20 4 8～38 1.4～10.7 700～1440 38.6 10

Note:1. Quantity range recommended: 50%Q’≤Q≤110%Q' (Q' Appropriate to capacity at

highest efficiency point).2. NPSH: appropriate to point Q recommended at highest speed.






- 24 -

Welcome to Excellence again!



Documents

Excellence Pumps