Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
EVOLINE POWER OUTLETS THE E-PLACE DESIGNEvoline power outlets are at the pinnacle of design and function. Manufactured in Germany by Schulte Electronics, the Evoline power outlets add a distinctive addition to any kitchen, office or area that requires a fast power source with both socket, data and USB charging facilities.
All Evoline power outlets are approved to Australian Standards.
LINCOLN SENTRY OFFICE, SHOP & WASHROOM HARDWARE
Office, Shop & Washroom Hardware
P.1
Offi
ce, S
hop
& W
ashr
oom
Har
dwar
eOf
fice,
Sho
p &
Was
hroo
m
Shelf Stripping P.2
Shelf Rail P.4
Keyboard & Cable Outlets P.5
EVOline Power Outlets P.6
CD & DVD Storage P.9
Cash Drawer Inserts P.10
Office & Shop
Furniture Support Legs P.11
Adjustable Cabinet Plinth Legs P.12
Legs
Castor Wheels P.13
Castors
Washroom Hardware P.18
Washroom Accessories P.28
Washroom Hardware
Sit n Stand Desks P.34
Linak Columns P.35 Linak Accessories P.49
Sit n Stand / Linak
OFFICE, SHOP & WASHROOM HARDWARE Dimension data and specifications may change without notification.
Office, Shop & Washroom Hardware
P.2
Shel
f Stri
ppin
gOf
fice,
Sho
p &
Was
hroo
m
Shelf StrippingOffice, Shop &
Washroom
Shelf StrippingDOUBLE SLOT STRIPPING
Features:
• Use 8 gauge countersunk screws to install - refer to section S - Fasteners, Blades & Accessories
SINGLE SLOT STRIPPING
Features:
• Use 8 gauge countersunk screws to install - refer to section S - Fasteners, Blades & Accessories
SHELF STRIPPING BRACKETS - 2 LUG
SHELF STRIPPING BRACKETS - 3 LUG
Finish Length CodeChromatic 1800mm 1-681-673White 1800mm 1-681-660White 2400mm 1-681-662
Finish Length CodeChromatic 1800mm 1-681-675Chromatic 2100mm 1-681-677Chromatic 2400mm 1-681-679White 600mm 1-681-663White 1000mm 1-681-663AWhite 1200mm 1-681-664White 1400mm 1-681-665White 1800mm 1-681-667White 2100mm 1-681-669White 2400mm 1-681-671
Finish Length CodeChromatic 150mm 1-681-695Chromatic 200mm 1-681-696Chromatic 250mm 1-681-697Chromatic 300mm 1-681-698White 150mm 1-681-681White 200mm 1-681-683White 250mm 1-681-685White 300mm 1-681-687
Finish Length CodeChromatic 350mm 1-681-699Chromatic 400mm 1-681-700Chromatic 450mm 1-681-701White 350mm 1-681-691White 400mm 1-681-692White 450mm 1-681-693White 500mm (4 lug) 1-681-694
LINCOLN SENTRY OFFICE, SHOP & WASHROOM HARDWARE
Office, Shop & Washroom Hardware
P.3
Shel
f Stri
ppin
gOf
fice,
Sho
p &
Was
hroo
m
Shelf StrippingOffice, Shop &
Washroom
Bracket AccessoriesSHELF STRIPPING END CLIPFeatures:
• Suits shelf stripping system• Add grommet below when using with glass shelves
SHELF STRIPPING CENTRE CLIP
Features:
• Suits shelf stripping system• Add grommet below when using with glass shelves
SHELF STRIPPING GROMMET
Features:
• Suits shelf stripping system for glass shelves
STAY BRACKET SHELF
Features:
• White powdercoated
FOLDABRAC FOLDING BRACKETFeatures:
• 70kg load rating (used in pairs)
Finish CodeClear Plastic 1-681-702
Finish CodeClear Plastic 1-681-704
Finish CodeClear Plastic 1-681-706
Dimensions Finish Code200mm x 200mm White 1-682-981250mm x 250mm White 1-682-982300mm x 300mm White 1-682-982A350mm x 350mm White 1-682-983400mm x 500mm White 1-682-984
Dimensions Finish Code300mm x 135mm White 1-681-655
Keyb
oard
& C
able
Oul
ets
Offic
e, S
hop
& W
ashr
oom
Keyboard & C
able Oulets
Office, Shop &
Washroom
OFFICE, SHOP & WASHROOM HARDWARE Dimension data and specifications may change without notification.
Office, Shop & Washroom Hardware
P.4
Shel
f Stri
ppin
gOf
fice,
Sho
p &
Was
hroo
m
Shelf StrippingOffice, Shop &
Washroom
Shelf Rail
EZI-SHELF TIMBER SHELF SUPPORT
Features:
• Suits 16mm thick timber board • Sold in length• Includes end caps (pair)• Load capacity 5Kg / 1000mm
EZI-SHELF SHELF END CAPS - TIMBER
Features:
• To suit Ezi-Shelf timber shelf support• Push in ends• Sold as pairs
STIFF ‘N’ SHELF SUPPORT RAIL
Features:
• Reduces sagging shelves • Suits 16mm thick timber board • Ideal for pantries and wardrobe systems • Sold in lengths
EZI-SHELF GLASS SHELF SUPPORT
Features:
• Sold in lengths • Fasten Ezi-Shelf directly into wall studs, especially for heavier load applications • Suits up to 8mm glass material• Includes end caps (pair)
EZI-SHELF END CAPS - GLASS
Features:
• To suit Ezi-Shelf glass shelf support (1-680-500) • Push in ends • Sold as pair
Finish Length CodeBlack 2.4m 1-680-500
Finish CodeBlack Plastic 1-680-550
Finish CodeWhite 1-681-550Black 1-681-555
Finish Length CodeWhite 3.6m 1-681-500Black 3.6m 1-681-510
Finish Length CodeWhite 4m 1-681-600
LINCOLN SENTRY OFFICE, SHOP & WASHROOM HARDWARE
Office, Shop & Washroom Hardware
P.5
Keyb
oard
& C
able
Oul
ets
Offic
e, S
hop
& W
ashr
oom
Keyboard & C
able Oulets
Office, Shop &
Washroom
Shel
f Stri
ppin
gOf
fice,
Sho
p &
Was
hroo
m
Shelf StrippingOffice, Shop &
Washroom
KEYBOARD DRAWER DELUXE
Features:
• Durable steel ball bearing slide mechanism • Drawer locks into position when in use • Mounts easily under desktop, shelf or table
LAZY SUSAN SWIVEL
Features:
• Load capacity - 75kg • Pre-assembled ready for installation in furniture components • Easy to install with exceptional load carrying capacity
FILE FRAME SUSPENSION
Features:
• Fits into drawer for hanging files
Finish Dimension CodeGrey Plastic 600mm W x 331mm D x 80mm H 1-658-603
Finish Dimension CodeZinc Plated 9.4mm x Ø 300mm 1-614-640
Finish Dimension CodeSteel Zinc Coated 393mm W x 340mm D x 237mm H 1-654-625
PLUG CABLE OUTLETS
Features:
• Available in 60mm or 80mm diameter
Diameter Material Finish Code60mm Plastic Beige 1-652-85460mm Plastic Black 1-652-854BL60mm Plastic Brown 1-652-85560mm Plastic Light Grey 1-652-855GR60mm Plastic White 1-652-856
Round - 35mm Aluminium Stainless Look 1-652-859Round – 60mm Aluminium Stainless Look 1-652-857Square – 60mm Aluminium Stainless Look 1-652-858
80mm Plastic Light Grey 1-652-856180mm Plastic Black 1-652-856280mm Plastic Beige 1-652-856380mm Plastic White 1-652-85641-652-857
KEYBOARD DRAWER UNDERDESK
Features:
• Durable steel ball bearing slide mechanism • Drawer locks into position when in use • Mounts easily under desktop, shelf or table
Finish Dimension CodeGrey Plastic 580mm W x 325mm D x 50mm H 1-658-601
• Slides under desk, out of sight, when not in use• Accepts all standard and extended keyboards
• Slides under desk, out of sight, when not in use• Accepts all standard and extended keyboards• Side extension for mouse
Keyboard & Cable Outlets
OFFICE, SHOP & WASHROOM HARDWARE Dimension data and specifications may change without notification.
Office, Shop & Washroom Hardware
P.6
EVO
line
Pow
er D
ocks
Offic
e, S
hop
& W
ashr
oom
EVOline Pow
er Docks
Office, Shop &
Washroom
OFFICE, SHOP & WASHROOM HARDWARE Dimension data and specifications may change without notification.P.6
EVOline Power Docks
EVOLINE PORT PUSH
Features:
• 2 x Australian power sockets• 1 x USB Charger• W 142mm x D142mm x H280mm• Pops up at the touch of a finger• Suits benchtop thickness 10-50mm• Available in 3 finishes – stainless steel, black glass & white glass• 3 meter cable with Australian plug• IP rating: 20• Made in Germany• 2 year warranty
EVOLINE PORT WITH DATA SOCKETS
Features:
• 3 x power sockets • 1 x overload circuit breaker - 2400 watt• Silver rocker cover, plastic lacquered • Clear anodised aluminium profile • Australian Standard sockets • 3 metre cable with Australian Standard plug • 2 x RJ45 data sockets (Cat. 6) - Cables not provided • Worktops - max. 50mm thickness • Cutout diameter - 102mm, total diameter - 127mm (tornado hole saw 2-345-102) • Pullout height - 271mm, total height - 347mm • IP rating: 20• Made in Germany• 2 year warranty
EVOLINE PORT DELUXE
Features:
• 3 x power sockets• 1 x overload circuit breaker - 2400 watt• Brushed stainless steel rocker cover• Midnight blue LED lighting• On/Off switch for LED’s• Clear anodised aluminium profile• Australian Standard sockets• 3 metre cable with Australian Standard plug• Worktops – max. 50mm thickness• Cutout diameter - 102mm, total diameter - 127mm (tornado hole saw 2-345-102)• Pullout height - 286mm, total height - 362mm• IP rating: 20• Made in Germany• 2 year warranty
Finish CodeStainless Steel (brushed) 1-652-930Black Glass (gloss) 1-652-931White Glass (frosted) 1-652-932
Finish CodePlastic Silver Cover 1-652-906
Finish CodeStainless Steel Cover (Brushed) 1-652-908
LINCOLN SENTRY OFFICE, SHOP & WASHROOM HARDWARE
Office, Shop & Washroom Hardware
P.7
EVO
line
Pow
er D
ocks
Offic
e, S
hop
& W
ashr
oom
EVOline Pow
er Docks
Office, Shop &
Washroom
P.7LINCOLN SENTRY OFFICE, SHOP & WASHROOM HARDWARE
EVOLINE USB PORT
Features:
• 2 x power sockets • 2 x USB charger point - perfect for charging phones, tablets, mp3 and other electronic devices• Silver rocker cover, plastic lacquered • Clear anodised aluminium profile • Australian Standard sockets • 3 metre cable with Australian Standard plug • Worktops – max. 50mm thickness • Cutout diameter - 102mm, total diameter - 127mm (tornado hole saw 2-345-102) • Mounting diameter clearance - 140mm • Pullout height - 236mm, total height 312mm• IP rating: 20• Made in Germany• 2 year warranty
EVOLINE PORT
Features:
• 3 x power sockets • 1 x overload circuit breaker - 2400 watt • Silver rocker cover, plastic lacquered • Clear anodised aluminium profile • Australian Standard sockets • 3 metre cable with Australian Standard plug • Worktops – max. 50mm thickness • Cutout diameter - 102mm, total diameter - 127mm (tornado hole saw 2-345-102) • Mounting diameter clearance - 140mm • Pullout height - 236mm, total height 312mm• IP rating: 20• Made in Germany• 2 year warranty
EVOLINE FLIPTOP
Features:
• Configuration - 2 x sockets, 1 x USB charger, Data socket, 1 x VGA, 1 x Audio & 1 x HDMI• W 310mm x D167mm x H68mm• Available in 304 stainless steel finish• Everything you need for a boardroom connectivity• Suits benchtop thickness 10-50mm• 3 meter power cable with Australian plug• 3 meter VGA, Audio & HDMI cables supplied• IP rating: 20• Made in Germany• 2 year warranty
Finish CodePlastic Silver Cover 1-652-911
Finish CodePlastic Silver Cover 1-652-904
Cover Finish CodeStainless Steel (brushed) 1-652-925
EVOline Power Docks
CD
& D
VD S
tora
geOf
fice,
Sho
p &
Was
hroo
m
CD
& D
VD Storage
Office, Shop &
Washroom
OFFICE, SHOP & WASHROOM HARDWARE Dimension data and specifications may change without notification.
Office, Shop & Washroom Hardware
P.8
EVO
line
Pow
er D
ocks
Offic
e, S
hop
& W
ashr
oom
EVOline Pow
er Docks
Office, Shop &
Washroom
EVOLINE REPLACEMENT PARTS
Description Finish CodeEVOline Rocker Cover Silver Plastic 1-652-912EVOline Rocker Cover Stainless Steel 1-652-913EVOline Replacement Collar Silver Plastic 1-652-914Tornado Hole Saw Ø102mm 5 x teeth - with arbor 2-345-102
1-652-912
1-652-913
EVOLINE BACKFLIP
The EVOline BackFlip sits nearly flush on the work surface - when closed - the giving enhanced protection against liquid spillages. At a touch of a finger, it turns 180 degrees to reveal two power sockets and a USB charger.
Features:
• 2 x Australian power sockets• 1 x USB Charger• W 225.2mm x D104.8mm x H53mm• Rotating insert reacts at the touch of a finger• Suits benchtop thickness 10-40mm• Available in 5 finishes• 3 meter cable with Australian plug• IP rating: 20• Made in Germany• 2 year warranty
Finish CodeStainless Steel 1-652-920Matt Black 1-652-921Matt White 1-625-922Glass Black (gloss) 1-652-923Glass White (frosted) 1-652-924
EVOline Power Docks
LINCOLN SENTRY OFFICE, SHOP & WASHROOM HARDWARE
Office, Shop & Washroom Hardware
P.9
CD
& D
VD S
tora
geOf
fice,
Sho
p &
Was
hroo
m
CD
& D
VD Storage
Office, Shop &
Washroom
EVO
line
Pow
er D
ocks
Offic
e, S
hop
& W
ashr
oom
EVOline Pow
er Docks
Office, Shop &
Washroom
CD HOLDER - SUITS DRAWER
Features:
• Holds 20 compact discs • Stick on to inside of drawer • Sold in pairs
ECHELON CD/DVD STORAGE MODULES
Features:
• Ideal for entertainment cabinet drawers• Fits both standard and slim CD cases as well as DVD cases• Modules connect with tongue and groove and can be cut to suit drawer width• Aluminium profile - 1020mm length• Suitable for TANDEM for Wood and MOVENTO drawer systems• M4 T-Slots available at bottom for securing to drawer base
CD/DVD RACK - POP OUT
Features:
• Holds 20 compact discs or 15 DVDs • Screw-on to shelf or cabinet • Sold in pairs
Dimension Finish Code1020mm L x 145.5mm W x 19mm H Natural Anodised Aluminium 1-618-657
Dimension Finish Code320mm x 160mm CD Black 1-618-652320mm x 160mm DVD Black 1-618-648
Dimension Finish Code304mm x 34mm Black 1-618-655
CD & DVD Storage
Furn
iture
Sup
port
Legs
Offic
e, S
hop
& W
ashr
oom
Furniture Support LegsOffice, Shop &
Washroom
OFFICE, SHOP & WASHROOM HARDWARE Dimension data and specifications may change without notification.
Drawer System
sHinge System
s
Office, Shop & Washroom Hardware
P.10
Cas
h D
raw
er In
serts
Offic
e, S
hop
& W
ashr
oom
Cash D
rawer Inserts
Office, Shop &
Washroom
Cash Drawer Inserts
COUNTACASH CASH DRAWER INSERT
Features:
• Ideal for high cash flow areas • Stand up note compartments and coin counters increase cash handling efficiency• Free standing with generous hanging lips • Made of special high impact styrene in charcoal black
Dimensions Configuration Code370mm W x 320mm D x 60mm H 5 Notes / 6 Coins 1-650-090
Dimensions Configuration Code280mm W x 330mm D x 38mm H 3 Notes / 6 Coins 1-650-086
Dimensions Configuration Code375mm W x 280mm D x 50mm H 4 Notes / 6 Coins 1-650-088
Dimensions Configuration Code495mm W x 405mm D x 50mm H 5 Notes / 6 Coins 1-650-089
STANDARD CASH DRAWER INSERT
Features:
• Made of special high impact styrene in charcoal black • Efficient and low cost • Free standing with generous hanging lips • Auto hold up note clips standard • Includes $1 coin dispenser and wrapper
DELUXE CASH DRAWER INSERT
Features:
• Made of special high impact styrene in charcoal black • Efficient and low cost • Free standing with generous hanging lips • Auto hold up note clips standard • Includes $1 coin dispenser and wrapper
SPECIALTY CASH DRAWER INSERT
Features:
• Made of special high impact styrene in charcoal black • Efficient and low cost • Free standing with generous hanging lips • Auto hold up note clips standard • Includes generous utility section for bankcard slips
LINCOLN SENTRY OFFICE, SHOP & WASHROOM HARDWARE
Office, Shop & Washroom Hardware
P.11
Furn
iture
Sup
port
Legs
Offic
e, S
hop
& W
ashr
oom
Furniture Support LegsOffice, Shop &
Washroom
Cas
h D
raw
er In
serts
Offic
e, S
hop
& W
ashr
oom
Cash D
rawer Inserts
Office, Shop &
Washroom
Furniture Support Legs
TABLE LEGS - CYLINDER
Features:
• Height min (max): 870mm/(900mm) • Sold per each
TABLE LEGS - CYLINDER
Features:
• Height min (max): 710mm/(740mm) • 1-616-110 and 1-616-113 sold as set of 4 • 1-616-140 and 1-616-141 sold individually
FOLDING TABLE LEGS
Features:
• Load capacity - 300kg • Sold in pairs• Powdercoated black
STAINLESS STEEL LEG - CYLINDER WITH ADJUSTABLE FOOT
Features:
• Kit = 1 x leg & 1 x base, sold per each• 30mm adjustment
Finish Ø Size CodeChrome 80mm 1-616-142Black 80mm 1-616-143
Finish Ø Size CodeChrome 60mm 1-616-110Black 60mm 1-616-113Chrome 80mm 1-616-140Black 80mm 1-616-141
Height Width Finish Code720mm 610mm Black 1-616-220
Finish Type Load CodeStainless Steel 100mm Leg Kit 150kg 1-616-196Stainless Steel 150mm Leg Kit 200kg 1-616-190Stainless Steel 200mm Leg Kit 200kg 1-616-197Stainless Steel 250mm Leg Kit 200kg 1-616-198Stainless Steel 100mm Leg 1-616-191Stainless Steel 150mm Leg 1-616-192Stainless Steel 200mm Leg 1-616-193Stainless Steel 250mm Leg 1-616-194Steel Zinc Plated Base Plate 1-616-195
50mm
Height
OFFICE, SHOP & WASHROOM HARDWARE Dimension data and specifications may change without notification.
Office, Shop & Washroom Hardware
P.12
Cas
tor W
heel
sOf
fice,
Sho
p &
Was
hroo
m
Castor W
heelsOffice, Shop &
Washroom
Adjustable Cabinet Plinth Legs
Description Finish CodeENKO Plinth Leg Kit - Knock-in Black Plastic 1-419-350ENKO Plinth Leg Kit - Screw-on Black Plastic 1-419-352
Description Finish CodeTSI Plinth Leg Kit - Knock-in Black Plastic 1-419-504TSI Plinth Leg Kit - Screw-on Black Plastic 1-419-505
Description Finish CodeMULTI-STAR Plinth Leg Kit - Screw-on Black Plastic 1-419-300MULTI-STAR Plinth Leg Kit - Knock-in Black Plastic 1-419-310
Plinth Leg Accessories Finish CodeENKO Base Only - Knock-in Black Plastic 1-419-354ENKO Base Only - Screw-on Black Plastic 1-419-356ENKO Plinth Leg Only Black Plastic 1-419-358ENKO Plinth Clip Screw-on Black Plastic 1-419-360
Plinth Leg Accessories Finish CodeTSI Base Only - Knock-in Black Plastic 1-419-501TSI Base Only - Screw-on Black Plastic 1-419-502TSI Plinth Leg Only Black Plastic 1-419-500TSI Plinth Clip Screw-In Black Plastic 1-419-503
Plinth Leg Accessories Finish CodePlinth Bracket Screw-on White Plastic 1-419-260
TSI CABINET ADJUSTABLE LEG
Features:
• Available with either Screw-on or Knock-in bases • Adjustable height 90mm to 170mm• Hole center = 64mm• Verticle load rating = 200kg
ENKO CABINET ADJUSTABLE LEG
Features:
• Available with either Screw-on or Knock-in bases • Preset at 150mm • Adjustable height 97mm to 187mm • Vertical load rating = 200kg • Hole center = 64mm
MULTI-STAR ADJUSTABLE CABINET LEG
Features:
• Fastening of face is ensured by locking element and side clamps • Save time in installation by pre-installing legs in workshop • Leg is locked in adaptor horizontally during transportation• Adjustable height 90mm to 185mm• Hole center = 64mm
Rotate Clockwise / Anticlockwise
Screw-on
Screw-on kit
Screw-on kit
Knock-in
Knock-in kit
Knock-in kit
Adjustable Legs
LINCOLN SENTRY OFFICE, SHOP & WASHROOM HARDWARE
Office, Shop & Washroom Hardware
P.13
Cas
tor W
heel
sOf
fice,
Sho
p &
Was
hroo
m
Castor W
heelsOffice, Shop &
Washroom
Castor Wheels
SQUARE PLATE SWIVEL CASTOR
Features:
• Includes square mounting plate (size:38mm x 38mm x 2mm)
SQUARE PLATE SWIVEL CASTOR - WITH BRAKE
Features:
• With brake option • Includes square mounting plate (size 38mm x 38mm x 2mm)
STEM (KNOCK-IN) SWIVEL CASTOR - UNHOODED
Features:
• Load capacity - 40kg
Finish Wheel Ø Total Height Load Rating CodeBlack 40mm 55mm 25kg 1-620-000Black 50mm 65mm 40kg 1-620-010
Finish Wheel Ø Total Height Load Rating CodeBlack 50mm 65mm 40kg 1-620-012
Finish Wheel Ø Stem x Height Socket CodeBlack 50mm 8mm x 38mm 8mm 1-620-120
SQUARE PLATE SWIVEL CASTOR - 40KG
Features:
• Width of tyre 19mm• Total height 66mm• Bolt hole 7mm, bolt hole centers 38 x 27mm
SQUARE PLATE FIXED CASTOR - 40KG
Features:
• Width of tyre 19mm • Total height 66mm • Bolt hole 7mm, bolt hole centers 38 x 27mm
Wheel Ø Load Tyre Plate Code50mm 40kg Grey Rubber 51 x 41mm 1-620-747
Wheel Ø Load Tyre Plate Code50mm 40kg Grey Rubber 51 x 41mm 1-620-750
OFFICE, SHOP & WASHROOM HARDWARE Dimension data and specifications may change without notification.
Office, Shop & Washroom Hardware
P.14
Cas
tor W
heel
sOf
fice,
Sho
p &
Was
hroo
m
Castor W
heelsOffice, Shop &
Washroom
Castor Wheels
SQUARE PLATE SWIVEL CASTOR - 40KG WITH BRAKE
Features:
• Width of tyre 19mm • Total height 66mm • Bolt hole 7mm, bolt hole centers 38 x 27mm
SQUARE PLATE FIXED CASTOR - 55KG
Features:
• Width of tyre 25mm• Total height 98mm• Bolt hole 9mm, bolt hole centers 46 x 46mm
SQUARE PLATE SWIVEL CASTOR - 55KG
Features:
• Width of tyre 25mm• Total height 98mm• Bolt hole 9mm, bolt hole centers 46 x 46mm
SQUARE PLATE SWIVEL CASTOR - 55KG WITH BRAKE
Features:
• Width of tyre 25mm• Total height 98mm• Bolt hole 9mm, bolt hole centers 46 x 46mm
PLATE BOLT HOLE SWIVEL CASTOR - 55KG WITH BRAKE
Features:
• Width of tyre 25mm • Total height 98mm • Bolt hole 11mm
SQUARE PLATE SWIVEL CASTOR - 100KG
Features:
• Width of tyre 32mm • Total height 128mm • Bolt hole 9mm, bolt hole centers 80 x 60mm
Wheel Ø Load Tyre Plate Code50mm 40kg Grey Rubber 51 x 41mm 1-620-752
Wheel Ø Load Tyre Plate Code75mm 55kg Grey Rubber 60 x 60mm 1-620-774
Wheel Ø Load Tyre Plate Code75mm 55kg Grey Rubber 60 x 60mm 1-620-778
Wheel Ø Load Tyre Plate Code75mm 55kg Grey Rubber 60 x 60mm 1-620-776
Wheel Ø Load Tyre Code75mm 55kg Grey Rubber 1-620-742
Wheel Ø Load Tyre Plate Code100mm 100kg Grey Rubber 100 x 80mm 1-620-754
LINCOLN SENTRY OFFICE, SHOP & WASHROOM HARDWARE
Office, Shop & Washroom Hardware
P.15
Cas
tor W
heel
sOf
fice,
Sho
p &
Was
hroo
m
Castor W
heelsOffice, Shop &
Washroom
Castor Wheels
SQUARE PLATE FIXED CASTOR - 100KG
Features:
• Width of tyre 32mm • Total height 128mm • Bolt hole 9mm, bolt hole centers 80 x 60mm
SQUARE PLATE SWIVEL CASTOR - 80KG
Features:
• Width of tyre 32mm• Total height 108mm • Bolt hole 9mm, bolt hole centers 80 x 60mm
SQUARE PLATE SWIVEL CASTOR - 100KG WITH BRAKE
Features:
• Width of tyre 32mm • Total height 128mm • Bolt hole 9mm, bolt hole centers 80 x 60mm
SQUARE PLATE FIXED CASTOR - 80KG
Features:
• Width of tyre 32mm • Total height 108mm • Bolt hole 7mm, bolt hole centers 80 x 60mm
Wheel Ø Load Tyre Plate Code100mm 100kg Grey Rubber 100 x 80mm 1-620-737
Wheel Ø Load Tyre Plate Code100mm 100kg Grey Rubber 100 x 80mm 1-620-732
Wheel Ø Load Tyre Plate Code80mm 80kg Nylon 100 x 80mm 1-620-746
Wheel Ø Load Tyre Plate Code80mm 80kg Nylon 100 x 80mm 1-620-780
SQUARE PLATE SWIVEL CASTOR - 80KG WITH BRAKE Features: • Width of tyre 32mm • Total height 108mm • Bolt hole 9mm, bolt hole centers 80 x 60mm
Wheel Ø Load Tyre Plate Code80mm 80kg Nylon 100 x 80mm 1-620-782
OFFICE, SHOP & WASHROOM HARDWARE Dimension data and specifications may change without notification.
Office, Shop & Washroom Hardware
P.16
Cas
tor W
heel
sOf
fice,
Sho
p &
Was
hroo
m
Castor W
heelsOffice, Shop &
Washroom
Castor Wheels
SQUARE PLATE SWIVEL CASTOR - 140KG WITH BRAKE
Features:
• Non marking elastic rubber tyres absorb shock loads while reducing friction and operating noise• High strength blue rubber which has no memory • Double headset bearings with sealing rings • Cast metal total lock brake • Total height 133mm • Bolt holes - 60 x 75-78mm
SQUARE PLATE TWIN WHEEL SWIVEL CASTOR - 70KG
Features:
• Twin wheel design for stability and manoeuvrability over carpet• High load capacity, low overall height • Double headset bearings • Total height - 72mm • Bolt holes - 47mm x 47mm
SQUARE PLATE TWIN WHEEL SWIVEL CASTOR - 70KG WITH BRAKE
Features:
• Twin wheel design for stability and manoeuvrability over carpet • High load capacity, low overall height • Double headset bearings • Total height - 72mm • Bolt holes - 47mm x 47mm
Wheel Ø Load Tyre Plate Code100mm 140kg Blue Rubber 78 x 98mm 1-620-786
Wheel Ø Load Tyre Plate Code100mm 140kg Blue Rubber 78 x 98mm 1-620-784
Wheel Ø Load Tyre Plate Code50mm 70kg Grey Rubber 60 x 60mm 1-620-790
Wheel Ø Load Tyre Plate Code50mm 70kg Grey Rubber 60 x 60mm 1-620-788
SQUARE PLATE SWIVEL CASTOR - 140KG
Features:
• Non marking elastic rubber tyres absorb shock loads while reducing friction and operating noise • High strength blue rubber which has no memory • Double headset bearings with sealing rings • Total height 133mm • Bolt holes - 60 x 75-78mm
LINCOLN SENTRY OFFICE, SHOP & WASHROOM HARDWARE
Office, Shop & Washroom Hardware
P.17
Cas
tor W
heel
sOf
fice,
Sho
p &
Was
hroo
m
Castor W
heelsOffice, Shop &
Washroom
Castor Wheels
SQUARE PLATE TWIN WHEEL SWIVEL CASTOR - 40KG
Features:
• Swivel castor, all nylon, without wheel brake, silver hub caps, grey wheels, 32mm drilling system • Total height - 73mm
SQUARE PLATE TWIN WHEEL SWIVEL CASTOR - 40KG WITH BRAKE
Features:
• Swivel castor, all nylon, with wheel brake, silver hub caps, grey wheels, 32mm drilling system • Total height - 73mm
SQUARE PLATE TWIN WHEEL SWIVEL CASTOR - 60KG
Features:
• Swivel castor, all nylon, without wheel brake, silver hub caps, grey wheels, 38mm drilling system • Total height - 83mm
SQUARE PLATE TWIN WHEEL SWIVEL CASTOR - 80KG
Features:
• Swivel castor, all nylon, without wheel brake, silver hub caps, grey wheels, 38mm drilling system • Total height - 98mm
SQUARE PLATE TWIN WHEEL SWIVEL CASTOR - 60KG WITH BRAKE
Features:
• Swivel castor, all nylon, with wheel brake, silver hub caps, grey wheels, 38mm drilling system • Total height - 83mm
SQUARE PLATE TWIN WHEEL SWIVEL CASTOR - 80KG WITH BRAKE
Features:
• Swivel castor, all nylon, with wheel brake, silver hub caps, grey wheels, 38mm drilling system • Total height - 98mm
Wheel Ø Load Tyre Plate Code50mm 40kg Nylon 42 x 42mm 1-620-050
Wheel Ø Load Tyre Plate Code50mm 40kg Nylon 42 x 42mm 1-620-052
Wheel Ø Load Tyre Plate Code60mm 60kg Nylon 60 x 60mm 1-620-056
Wheel Ø Load Tyre Plate Code60mm 60kg Nylon 60 x 60mm 1-620-054
Wheel Ø Load Tyre Plate Code75mm 80kg Nylon 60 x 60mm 1-620-060
Wheel Ø Load Tyre Plate Code75mm 80kg Nylon 60 x 60mm 1-620-058
OFFICE, SHOP & WASHROOM HARDWARE Dimension data and specifications may change without notification.
Office, Shop & Washroom Hardware
P.18
Was
hroo
m H
ardw
are
Offic
e, S
hop
& W
ashr
oom
Washroom
Hardw
areOffice, Shop &
Washroom
STAINLESS STEEL GRAVITY HINGE OPEN ASSIST - CONCEALED SCREW FIX
Features:
• 304 Stainless steel, nylon inserts• Stain finish• Lift Off Hinge• Includes fixing screws• Load Rating per hinge: 15kg• Sold as an each
Type Sold CodeRight Hand Hinge 1 = 1 Hinge 2-700-001Left Hand Hinge 1 = 1 Hinge 2-700-006
Type Sold CodeRight Hand Hinge 1 = 1 Hinge 2-700-011Left Hand Hinge 1 = 1 Hinge 2-700-016
Description Sold CodeCoat Hook - Concealed 1 = 1 Hook 2-700-021
Description Sold CodeBumper - Concealed Screw 1 = 1 Bumper 2-700-031
DIECAST ZINC GRAVITY HINGE OPEN ASSIST - CONCEALED SCREW FIX
Features:
• Diecast zinc, stainless steel shaft, nylon inserts • Satin chrome-plated finish & ABS snap on covers• Lift off hinge• Includes fixing screws• Load ratings per hinge: 15kg• Sold as an each
BUMPER - CONCEALED SCREW FIX
Features:
• Diecast zinc material & rubber insert• Satin chrome finish & ABS snap on cover
COAT HOOK - CONCEALED SCREW FIX
Features:
• Diecast zinc & rubber bumper• Satin chrome finish & ABS snap on covers
Concealed Screw Fix
LINCOLN SENTRY OFFICE, SHOP & WASHROOM HARDWARE
Office, Shop & Washroom Hardware
P.19
Was
hroo
m H
ardw
are
Offic
e, S
hop
& W
ashr
oom
Washroom
Hardw
areOffice, Shop &
Washroom
Concealed Screw Fix
A B Cor D
D
D
E
Gravity Hinge, Diecast Zinc
Gravity Hinge, Stainless Steel Coat Hook Slide Lock
Indicator
Staple
Bumper
Description Sold CodeStandard Latch Set – Concealed Screw 1 = 1 Set 2-700-026
Standard Access Partition Kit Concealed Screw Fix – Diecast Hinge Type Code
A C D ERight Hand 2-700-036Left Hand 2-700-037
Standard Access Partition Kit Concealed Screw Fix – Diecast Hinge Type Code
B C D ERight Hand 2-700-046Left Hand 2-700-047
STANDARD LATCH SET - CONCEALED SCREW FIX
Features:
• Includes slide lock, indicator and staple (diecast zinc)• Satin chrome finish & ABS snap on covers• Concealed screw fixings• Suits 13mm, 18mm and 25mm boards
COMPLETE STANDARD PARTITION KIT - CONCEALED SCREW FIX
Features:
• Complete washroom partition set includes 2 x Gravity Hinge – concealed screw fix, Coat Hook, Turnbolt, Indicator, Staple and Bumper.• Handing is determined from the inside. A left hand kit has the hinge on the left hand side; A right hand kit has the hinge on the right hand side (while standing
inside the cubicle)
OFFICE, SHOP & WASHROOM HARDWARE Dimension data and specifications may change without notification.
Office, Shop & Washroom Hardware
P.20
Was
hroo
m H
ardw
are
Offic
e, S
hop
& W
ashr
oom
Washroom
Hardw
areOffice, Shop &
Washroom
Concealed Screw Fix
Type Sold CodeBumper – Bolt Through 1 = 1 Bumper 2-700-031
BUMPER - CONCEALED SCREW FIX
Features:
• Diecast zinc material & rubber insert• Satin chrome finish & ABS snap on cover
STAINLESS STEEL GRAVITY HINGE OPEN ASSIST - CONCEALED SCREW FIX
Features:
• 304 Stainless steel, nylon inserts• Stain finish• Lift off hinge• Includes fixing screws• Load rating per hinge: 15kg• Sold as an each
Type Sold CodeRight Hand Hinge 1 = 1 Hinge 2-700-001Left Hand Hinge 1 = 1 Hinge 2-700-006
Type Sold CodeRight Hand Hinge 1 = 1 Hinge 2-700-011Left Hand Hinge 1 = 1 Hinge 2-700-016
Description Sold CodeCoat Hook - Concealed 1 = 1 Hook 2-700-021
DIECAST ZINC GRAVITY HINGE OPEN ASSIST - CONCEALED SCREW FIX
Features:
• Diecast zinc, stainless steel shaft, nylon inserts • Satin chrome-plated finish & ABS snap on covers• Lift off hinge• Includes fixing screws• Load ratings per hinge: 15kg• Sold as an each
COAT HOOK - CONCEALED SCREW FIX
Features:
• Diecast zinc & rubber bumper• Satin chrome finish & ABS snap on covers
LINCOLN SENTRY OFFICE, SHOP & WASHROOM HARDWARE
Office, Shop & Washroom Hardware
P.21
Was
hroo
m H
ardw
are
Offic
e, S
hop
& W
ashr
oom
Washroom
Hardw
areOffice, Shop &
Washroom
DISABLED ACCESS LATCH SET – CONCEALED SCREW FIX
Features:
• Includes turnbolt (brass), indicator (diecast zinc) and staple (brass)• Satin chrome finish• Concealed screw fixings (turnbolt and indicator)• Bolt through fixing (staple)• Suits 13mm, 18mm & 25mm boards
Description Sold CodeDisable Access Latch Set – Concealed Screw 1 = 1 Set 2-700-029
Disabled Partition Kit Concealed Screw Fix – Diecast Hinge Type Code
A C D ERight Hand 2-700-038Left Hand 2-700-039
Disabled Partition Kit Concealed Screw Fix – Stainless Steel Hinge Type Code
B C D ERight Hand 2-700-048Left Hand 2-700-049
COMPLETE DISABLED ACCESS PARTITION KIT – CONCEALED SCREW FIX
Concealed Screw Fix - Disabled Access
Features:
• Complete washroom partition set includes 2 x Gravity Hinge – bolt through fix, Coat Hook, Turnbolt, Indicator, Staple and Bumper.• Handing is determined from the inside. A left hand kit has the hinge on the left hand side; A right hand kit has the hinge on the right hand side (while standing inside
the cubicle)
A B Cor D
D
D
E
Gravity Hinge, Diecast Zinc
Gravity Hinge, Stainless Steel
Coat Hook Slide Lock
Indicator
Staple
Bumper
OFFICE, SHOP & WASHROOM HARDWARE Dimension data and specifications may change without notification.
Office, Shop & Washroom Hardware
P.22
Was
hroo
m H
ardw
are
Offic
e, S
hop
& W
ashr
oom
Washroom
Hardw
areOffice, Shop &
Washroom
Bolt Through Fix
Type Sold CodeRight Hand Hinge 1 = 1 Hinge 2-700-060Left Hand Hinge 1 = 1 Hinge 2-700-065
Type Sold CodeBumper – Bolt Through 1 = 1 Bumper 2-700-075
BUMPER - BOLT THROUGHFeatures:
• Diecast zinc material & rubber insert• Satin chrome finish
Description Sold CodeCoat Hook - Concealed 1 = 1 Hook 2-700-021
COAT HOOK - CONCEALED SCREW FIXFeatures:
• Diecast zinc & rubber bumper• Satin chrome finish & ABS snap on covers
DIECAST ZINC GRAVITY HINGE OPEN ASSIST – BOLT THROUGH
Features:
• Diecast zinc, stainless steel shaft, nylon inserts • Satin chrome-plated finish• Open assist and lift off hinge• Load ratings per hinge: 15kg• Sold as an each• Supplied with bolts and nuts
STAINLESS STEEL SPRING HINGE OPEN ASSIST – BOLT THROUGHFeatures:
• 304 Stainless steel, nylon inserts• Stain finish• Use for both right hand and hand applications• Open assist• Load rating per hinge: 15kg• Sold as an each• Supplied with bolts and nuts
Type Sold CodeSpring Hinge 1 = 1 Hinge 2-700-070
35
LINCOLN SENTRY OFFICE, SHOP & WASHROOM HARDWARE
Office, Shop & Washroom Hardware
P.23
Was
hroo
m H
ardw
are
Offic
e, S
hop
& W
ashr
oom
Washroom
Hardw
areOffice, Shop &
Washroom
Bolt Through Fix
A B C D
D
D
E
or
Gravity Hinge, Diecast Zinc
Spring Hinge, Stainless Steel
Coat Hook Turnbolt
Indicator
Staple
Bumper
COMPLETE STANDARD PARTITION KIT – BOLT THROUGH
Features:
• Complete washroom partition set includes 2 x Gravity Hinge – bolt through fix, Coat Hook, Turnbolt, Indicator, Staple and Bumper.• Handing is determined from the inside. A left hand kit has the hinge on the left hand side; A right hand kit has the hinge on the right hand side (while standing inside
the cubicle)
Standard Partition Kit Bolt Through Type Code
A C D ERight Hand 2-700-080Left Hand 2-700-085
Standard Partition Kit Bolt Through Type Code
B C D E Right Hand 2-700-090
Description Sold CodeStandard Latch Set - Bolt Through 1 = 1 Set 2-700-027
STANDARD LATCH SET - BOLT THROUGHFeatures:
• Includes turnbolt (brass), indicator (diecast zinc) and staple (brass)• Satin chrome finish• Concealed screw fixings (turnbolt and indicator)• Bolt through fixing (staple)• Suits 13mm, 18mm & 25mm boards
Standard Partition Kit Bolt Through
OFFICE, SHOP & WASHROOM HARDWARE Dimension data and specifications may change without notification.
Office, Shop & Washroom Hardware
P.24
Was
hroo
m H
ardw
are
Offic
e, S
hop
& W
ashr
oom
Washroom
Hardw
areOffice, Shop &
Washroom
DIECAST ZINC GRAVITY HINGE HOLD OPEN - SCREW FIXFeatures:
• Diecast zinc, stainless steel shaft, nylon inserts• Hold open and lift off hinge• Includes fixing screws• Load ratings per hinge: 15kg• Sold as an each
Type Sold CodeRight Hand Hinge 1 = 1 Hinge 2-700-000Left Hand Hinge 1 = 1 Hinge 2-700-005
COAT HOOK - CONCEALED SCREW FIXFeatures:
• Diecast zinc & rubber bumper • Satin chrome finish & ABS snap on covers
Description Sold CodeCoat Hook - Concealed 1 = 1 Hook 2-700-021
BUMPER - SCREW FIXFeatures:
• Diecast zinc material & rubber insert • Satin chrome finish
Description Sold CodeBumper - Concealed Screw 1 = 1 Bumper 2-700-030
PROJECT LATCH SET - SCREW FIXFeatures:
• Includes turnbolt (brass), indicator and staple (diecast zinc)• Satin chrome finish
Description Sold CodeStandard Latch Set - Concealed Screw 1 = 1 Set 2-700-025
Screw Fix
LINCOLN SENTRY OFFICE, SHOP & WASHROOM HARDWARE
Office, Shop & Washroom Hardware
P.25
Was
hroo
m H
ardw
are
Offic
e, S
hop
& W
ashr
oom
Washroom
Hardw
areOffice, Shop &
Washroom
Partition Legs
REBATED SHAFT FOOT (110 SERIES)Features:
• Stainless steel• Off floor system• 50mm adjustment
SINGLE FIX FOOT (112 SERIES)Features:
• Stainless steel• Off floor system• 50mm adjustment
DOUBLE FIX FOOT (111 SERIES)Features:
• Stainless steel• Off floor system• 50mm adjustment
DOUBLE FIX FOOT (122 SERIES)Features:
• Stainless steel• To suit 18mm dividers only• Off floor system• 50mm adjustment
Metlam Australia Pty Ltd Tel: 61 3 5428 4618 Fax: 61 3 5428 1780 Email: [email protected] www.metlam.com.au
Section 4 - 18The photographs and line drawings of the products in this catalogue are representational only.Metlam Australia Pty Ltd reserves the right to, and from time to time, make changes and improvements in design and dimensions.
Rebated Shaft Foot AssemblyCode
MaterialFinishFeatures
Specify
110 Series
Stainless SteelSatin Stainless SteelOff Floor System50mm Adjustment110 - 150: 125mm min - 175mm max height110 - 200: 175mm min - 225mm max height110 - 250: 225mm min - 275mm max height110 - 300: 275mm min - 325mm max height
Foot Assemblies
Double Fix Foot AssemblyCode
MaterialFinishFeatures
Specify
111 Series
Stainless SteelSatin Stainless SteelOff Floor System50mm Adjustment111 - 150: 125mm min - 175mm max height111 - 200: 175mm min - 225mm max height111 - 250: 225mm min - 275mm max height111 - 300: 275mm min - 325mm max height
Code
MaterialFinishFeatures
Specify
112 Series
Stainless SteelSatin Stainless SteelOff Floor System50mm Adjustment112 - 150: 125mm min - 175mm max height112 - 200: 175mm min - 225mm max height112 - 250: 225mm min - 275mm max height112 - 300: 275mm min - 325mm max height
Single Fix Foot Assembly
Code
MaterialFinishFeatures
Specify
122 Series
Stainless SteelSatin Stainless SteelOff Floor System50mm Adjustment122 - 150: 125mm min - 175mm max height122 - 200: 175mm min - 225mm max height122 - 250: 225mm min - 275mm max height122 - 300: 275mm min - 325mm max height
T Piece Foot Assembly
150
18
52
70
25
52
70
16
20
95 20
52
70
7
52
70
104 49
Metlam Australia Pty Ltd Tel: 61 3 5428 4618 Fax: 61 3 5428 1780 Email: [email protected] www.metlam.com.au
Section 4 - 18The photographs and line drawings of the products in this catalogue are representational only.Metlam Australia Pty Ltd reserves the right to, and from time to time, make changes and improvements in design and dimensions.
Rebated Shaft Foot AssemblyCode
MaterialFinishFeatures
Specify
110 Series
Stainless SteelSatin Stainless SteelOff Floor System50mm Adjustment110 - 150: 125mm min - 175mm max height110 - 200: 175mm min - 225mm max height110 - 250: 225mm min - 275mm max height110 - 300: 275mm min - 325mm max height
Foot Assemblies
Double Fix Foot AssemblyCode
MaterialFinishFeatures
Specify
111 Series
Stainless SteelSatin Stainless SteelOff Floor System50mm Adjustment111 - 150: 125mm min - 175mm max height111 - 200: 175mm min - 225mm max height111 - 250: 225mm min - 275mm max height111 - 300: 275mm min - 325mm max height
Code
MaterialFinishFeatures
Specify
112 Series
Stainless SteelSatin Stainless SteelOff Floor System50mm Adjustment112 - 150: 125mm min - 175mm max height112 - 200: 175mm min - 225mm max height112 - 250: 225mm min - 275mm max height112 - 300: 275mm min - 325mm max height
Single Fix Foot Assembly
Code
MaterialFinishFeatures
Specify
122 Series
Stainless SteelSatin Stainless SteelOff Floor System50mm Adjustment122 - 150: 125mm min - 175mm max height122 - 200: 175mm min - 225mm max height122 - 250: 225mm min - 275mm max height122 - 300: 275mm min - 325mm max height
T Piece Foot Assembly
150
18
52
70
25
52
70
16
20
95 20
52
70
7
52
70
104 49
Metlam Australia Pty Ltd Tel: 61 3 5428 4618 Fax: 61 3 5428 1780 Email: [email protected] www.metlam.com.au
Section 4 - 18The photographs and line drawings of the products in this catalogue are representational only.Metlam Australia Pty Ltd reserves the right to, and from time to time, make changes and improvements in design and dimensions.
Rebated Shaft Foot AssemblyCode
MaterialFinishFeatures
Specify
110 Series
Stainless SteelSatin Stainless SteelOff Floor System50mm Adjustment110 - 150: 125mm min - 175mm max height110 - 200: 175mm min - 225mm max height110 - 250: 225mm min - 275mm max height110 - 300: 275mm min - 325mm max height
Foot Assemblies
Double Fix Foot AssemblyCode
MaterialFinishFeatures
Specify
111 Series
Stainless SteelSatin Stainless SteelOff Floor System50mm Adjustment111 - 150: 125mm min - 175mm max height111 - 200: 175mm min - 225mm max height111 - 250: 225mm min - 275mm max height111 - 300: 275mm min - 325mm max height
Code
MaterialFinishFeatures
Specify
112 Series
Stainless SteelSatin Stainless SteelOff Floor System50mm Adjustment112 - 150: 125mm min - 175mm max height112 - 200: 175mm min - 225mm max height112 - 250: 225mm min - 275mm max height112 - 300: 275mm min - 325mm max height
Single Fix Foot Assembly
Code
MaterialFinishFeatures
Specify
122 Series
Stainless SteelSatin Stainless SteelOff Floor System50mm Adjustment122 - 150: 125mm min - 175mm max height122 - 200: 175mm min - 225mm max height122 - 250: 225mm min - 275mm max height122 - 300: 275mm min - 325mm max height
T Piece Foot Assembly
150
18
52
70
25
52
70
16
20
95 20
52
70
7
52
70
104 49
Metlam Australia Pty Ltd Tel: 61 3 5428 4618 Fax: 61 3 5428 1780 Email: [email protected] www.metlam.com.au
Section 4 - 18The photographs and line drawings of the products in this catalogue are representational only.Metlam Australia Pty Ltd reserves the right to, and from time to time, make changes and improvements in design and dimensions.
Rebated Shaft Foot AssemblyCode
MaterialFinishFeatures
Specify
110 Series
Stainless SteelSatin Stainless SteelOff Floor System50mm Adjustment110 - 150: 125mm min - 175mm max height110 - 200: 175mm min - 225mm max height110 - 250: 225mm min - 275mm max height110 - 300: 275mm min - 325mm max height
Foot Assemblies
Double Fix Foot AssemblyCode
MaterialFinishFeatures
Specify
111 Series
Stainless SteelSatin Stainless SteelOff Floor System50mm Adjustment111 - 150: 125mm min - 175mm max height111 - 200: 175mm min - 225mm max height111 - 250: 225mm min - 275mm max height111 - 300: 275mm min - 325mm max height
Code
MaterialFinishFeatures
Specify
112 Series
Stainless SteelSatin Stainless SteelOff Floor System50mm Adjustment112 - 150: 125mm min - 175mm max height112 - 200: 175mm min - 225mm max height112 - 250: 225mm min - 275mm max height112 - 300: 275mm min - 325mm max height
Single Fix Foot Assembly
Code
MaterialFinishFeatures
Specify
122 Series
Stainless SteelSatin Stainless SteelOff Floor System50mm Adjustment122 - 150: 125mm min - 175mm max height122 - 200: 175mm min - 225mm max height122 - 250: 225mm min - 275mm max height122 - 300: 275mm min - 325mm max height
T Piece Foot Assembly
150
18
52
70
25
52
70
16
20
95 20
52
70
7
52
70
104 49
HEAVY DUTY ADJUSTABLE LEGSFeatures:
• Aluminium & nylon base• Natural anodised finish• Suits 13mm & 18mm board
Type Min Height Max Height Code150mm 135mm 165mm 2-700-360165mm 165mm 205mm 2-700-361200mm 185mm 225mm 2-700-362
Height Adjustments CodeMin 125mm to Max 175mm 2-700-170Min 175mm to Max 225mm 2-700-180Min 225mm to Max 275mm 2-700-190Min 275mm to Max 325mm 2-700-200
Height Adjustments CodeMin 125mm to Max 175mm 2-700-210Min 175mm to Max 225mm 2-700-220Min 225mm to Max 275mm 2-700-230Min 275mm to Max 325mm 2-700-240
Height Adjustments CodeMin 125mm to Max 175mm 2-700-290Min 175mm to Max 225mm 2-700-300Min 225mm to Max 275mm 2-700-310Min 275mm to Max 325mm 2-700-320
Height Adjustments CodeMin 125mm to Max 175mm 2-700-250Min 175mm to Max 225mm 2-700-260Min 225mm to Max 275mm 2-700-270Min 275mm to Max 325mm 2-700-280
Cha
nnel
, Han
dles
& H
ooks
Offic
e, S
hop
& W
ashr
oom
Channel, H
andles & H
ooksOffice, Shop &
Washroom
OFFICE, SHOP & WASHROOM HARDWARE Dimension data and specifications may change without notification.
Office, Shop & Washroom Hardware
P.26
Stap
les
& B
umpe
rsOf
fice,
Sho
p &
Was
hroo
m
Staples & B
umpers
Office, Shop &
Washroom
LIFT OFF STAPLE - LEFT HANDEDFeatures:
• For use with right hand gravity hinge 2-700-000 or 2-700-060• Brass material• Satin chrome-plated finish• Bolt through fixing
Type CodeLift Off Staple - Left Handed 2-700-140
EDGE MOUNTED BUMPERFeatures:
• 304 Stainless Steel & rubber insert• Screw fix mounting
ADDITIONAL FACE PLATEFeatures:
• 304 Stainless Steel• 1mm thick for bolt through• Hinge mounting• Sold as set of 4
Staples & Bumpers
LIFT OFF STAPLE - RIGHT HANDEDFeatures:
• For use with right hand gravity hinge 2-700-005 or 2-700-065• Brass material• Satin chrome-plated finish• Bolt through fixing
Type CodeLift Off Staple - Right Handed 2-700-150
Type CodeEdge Mounted Bumper 2-700-120
Type CodeAdditional Face Plate 2-700-160
LINCOLN SENTRY OFFICE, SHOP & WASHROOM HARDWARE
Office, Shop & Washroom Hardware
P.27
Cha
nnel
, Han
dles
& H
ooks
Offic
e, S
hop
& W
ashr
oom
Channel, H
andles & H
ooksOffice, Shop &
Washroom
Stap
les
& B
umpe
rsOf
fice,
Sho
p &
Was
hroo
m
Staples & B
umpers
Office, Shop &
Washroom
Channel, Handles & Hooks
L
H
Hole Centre = 96mm
Ø Length & Height Code8mm 105mm x 30mm 1-545-52210mm 105mm x 30mm 1-545-526
Code1-490-272
Code1-490-270
HAT AND COAT HOOKFeatures:
• Chrome plated• 75mm projection
HANDLESFeatures:
• Satin chrome finish• 96mm hole centre• Required for all ambulant and disabled cubicles
Typical Head Assembly Typical Wall/Partition Assembly
Suit Board Length X Measurement Y Measurement Code
13mm board 2700mm 12mm 20mm 2-700-16618mm board 2700mm 17mm 25mm 2-700-169
PARTITION INSERT CHANNEL
Suit Board Length X Measurement Y Measurement Code13mm board 1800mm 15mm 20mm 2-700-16713mm board 3600mm 15mm 20mm 2-700-16818mm board 1800mm 20mm 25mm 2-700-16518mm board 3600mm 20mm 25mm 2-700-163
PARTITION TOP WALL CHANNEL
COAT RACK - 5 HOOKSFeatures:
• Chrome finish• Screws included
OFFICE, SHOP & WASHROOM HARDWARE Dimension data and specifications may change without notification.
Drawer System
sHinge System
s
Office, Shop & Washroom Hardware
P.28
Was
hroo
m A
cces
sorie
sOf
fice,
Sho
p &
Was
hroo
m
Washroom
AccessoriesOffice, Shop &
Washroom
Other Partition Fittings
Code2-700-350
TOILET ROLL HOLDER – BASIC
Features:
• 304 Stainless Steel• Holds 1 roll of paper
Code2-710-000
TOILET ROLL HOLDER – SINGLE ROLL
Features:
• 304 Stainless Steel• Holds 1 roll of paper
Code2-710-001
TOILET ROLL HOLDER – TWIN ROLL
Features:
• 304 Stainless Steel• Holds 2 rolls of paper
Code2-710-002
SOAP DISPENSER VERTICAL – STAINLESS STEEL
Features:
• 304 Stainless Steel• Black ABS pump button• Concealed fixings• 1.2 litre capacity• Lockable hinged lid (key provided)
LINCOLN SENTRY OFFICE, SHOP & WASHROOM HARDWARE
Office, Shop & Washroom Hardware
P.29
Was
hroo
m A
cces
sorie
sOf
fice,
Sho
p &
Was
hroo
m
Washroom
AccessoriesOffice, Shop &
Washroom
Other Partition Fittings
Code2-710-003
PAPER DISPENSER INTERFOLD - STAINLESS STEEL
Features:
• 304 Stainless Steel• Concealed fixings• 450 C –Fold or 600 multi-fold paper towel capacity
Code2-710-004
ELECTRIC HAND DRYER - STAINLESS STEEL
Features:
• 304 Stainless Steel• High-flow dual air outlets• Motor: 250-500W Brush Type: Dual Ball Bearings,
16,000-29,000 RPM• 95°C auto reset overload• 220-240V, 50Hz, 1000W• DP Rating: IP 24• Warranty: Labour – 3 years and Parts – 5 years
Code2-710-005
WASHROOM SHELF - STAINLESS STEEL
Features:
• 304 Stainless Steel• W457mm x H105mm x D128mm• 4 mounting holes – fixings not included
Code2-710-006
WASHROOM MIRROR - STAINLESS STEEL FRAME
Features:
• Frame: 304 Stainless Steel• Mirror: 6mm Glass (Vinyl backed)• Unit secured with Stainless Steel wall brackets• W450mm x H1000mm x D25mm• Fully complies with AS1428.1
OFFICE, SHOP & WASHROOM HARDWARE Dimension data and specifications may change without notification.
Drawer System
sHinge System
s
Office, Shop & Washroom Hardware
P.30
Was
hroo
m A
cces
sorie
sOf
fice,
Sho
p &
Was
hroo
m
Washroom
AccessoriesOffice, Shop &
Washroom
Disability and Ambulant Toilet Hardware
376.40
155.5
0560
376.40
155.5
0
Code2-710-054
90° FLUSH AMBULANT GRAB RAIL
Features:
• 304 Stainless Steel• Rail: Ø32mm• Concealed fixings: Ø78mm• Suits right hand or left hand installation• Fully compliant with AS1428.1
90° FLUSH MOUNT SIDE WALL & CISTERN GRAB RAIL SET
Features:
• Right hand set shown• 304 Stainless Steel • Rail: Ø32mm• Concealed fixings: Ø78mm• Includes 300mm rail• Fully compliant with AS1428.1
Code2-710-007
STRAIGHT RAIL PADDED BACKREST
Features:
• 304 Stainless Steel frame and mounts• White padded PVC backrest• Concealed fixings• 20mm adjustable height on backrest• Fully compliant with AS1428.1
Type CodeRight Hand Set 2-710-008Left Hand Set 2-710-009
LINCOLN SENTRY OFFICE, SHOP & WASHROOM HARDWARE
Office, Shop & Washroom Hardware
P.31
Was
hroo
m A
cces
sorie
sOf
fice,
Sho
p &
Was
hroo
m
Washroom
AccessoriesOffice, Shop &
Washroom
Shower Hardware
1600mm1600mm
1000
mm
Code2-710-013
RH OFFSET FLUSH MOUNT SHOWER GRAB RAIL
Features:
• 304 Stainless Steel • Rail: Ø32mm• Concealed fixings: Ø78mm• Fully compliant with AS1428.1
Code2-710-014
LH OFFSET FLUSH MOUNT SHOWER GRAB RAIL
Features:
• 304 Stainless Steel • Rail: Ø32mm• Concealed fixings: Ø78mm• Fully compliant with AS1428.1
SHOWER/BED CURTAIN TRACK SYSTEM
Features:
• Anodised Aluminium• Concealed fixings• Components supplied: Track, Ceiling Suspension
Rod, Hooks & Wall Mount Bracket• Full compliant with AS1428.1• 2-710-018 - Shower/Bed Curtain
W3000mm x H2000mm (sold separately)
Code2-710-012
SOAP DISH WITH DRAIN – STAINLESS STEEL
Features:
• 304 Stainless Steel – satin finish• Concealed fixings• W110mm x H50mm x D108mm
Type CodeTrack System 2-710-017Shower/Bed Curtain 2-710-018
OFFICE, SHOP & WASHROOM HARDWARE Dimension data and specifications may change without notification.
Drawer System
sHinge System
s
Office, Shop & Washroom Hardware
P.32
Was
hroo
m A
cces
sorie
sOf
fice,
Sho
p &
Was
hroo
m
Washroom
AccessoriesOffice, Shop &
Washroom
Shower Hardware and Accessories
Code2-710-016
Code2-710-015
PHENOLIC COMPOUND FOLDING SHOWER SEAT
Features:
• 304 Stainless Steel frame• White phenolic compound single piece seat with
black edging & drainage slots• Visible fixings• Fold away lockable support leg• Low profile upright storage position• Fully compliant with AS1428.1• Width 960mm
Code2-710-021
METLAM HORIZONTAL BABY CHANGE STATION
Features:
• Hi-density bacteria resistant polyethylene body
• Stainless Steel hinge• Safety restraining strap fitted with
click lock mechanism• Gas spring design allows one-handed
opening and closing operation• Suitable for up to 20kg use• Size open: W855mm x H560mm x D495mm• Size closed: W855mm x H560mm x D107mm
32MM GRAB RAIL SHOWER KIT
Features:
• Kit comes with shower head, 2m chrome hose, chrome elbow and grab rail slider
• WELS rating: 3 star or 9 L/min
LINCOLN SENTRY OFFICE, SHOP & WASHROOM HARDWARE
Office, Shop & Washroom Hardware
P.33
Was
hroo
m A
cces
sorie
sOf
fice,
Sho
p &
Was
hroo
m
Washroom
AccessoriesOffice, Shop &
Washroom
Signage
• Available in either vinyl (blue with white print) or 304 stainless steel• Braille markings• Many more options available
Male Shower Female Shower Accessible Shower Cleaner
W200 x H150mm W200 x H150mm W200 x H150mm W150 x H150mm
Vinyl Code Vinyl Code Vinyl Code Vinyl Code
2-710-046 2-710-048 2-710-050 2-710-052
Stainless Steel Code Stainless Steel Code Stainless Steel Code Stainless Steel Code
2-710-047 2-710-049 2-710-051 2-710-053
Baby Change Parents Room RH Female Accessible Toilet LH Female Accessible Toilet
W150 x H150mm W200 x H150mm W205 x H150mm W205 x H150mm
Vinyl Code Vinyl Code Vinyl Code Vinyl Code
2-710-022 2-710-044 2-710-040 2-710-042
Stainless Steel Code Stainless Steel Code Stainless Steel Code Stainless Steel Code
2-710-023 2-710-045 2-710-041 2-710-043
Male Toilet Female Toilet Male Changeroom Female Changeroom
W150 x H150mm W150 x H150mm W180 x H150mm W180 x H150mm
Vinyl Code Vinyl Code Vinyl Code Vinyl Code
2-710-024 2-710-026 2-710-028 2-710-030
Stainless Steel Code Stainless Steel Code Stainless Steel Code Stainless Steel Code
2-710-025 2-710-027 2-710-029 2-710-031
RH Accessible Toilet LH Accessible Toilet RH Male Accessible Toilet LH Male Accessible Toilet
W150 x H150mm W150 x H150mm W205 x H150mm W205 x H150mm
Vinyl Code Vinyl Code Vinyl Code Vinyl Code
2-710-032 2-710-034 2-710-036 2-710-038
Stainless Steel Code Stainless Steel Code Stainless Steel Code Stainless Steel Code
2-710-033 2-710-035 2-710-037 2-710-039
Lina
k C
olum
nsOf
fice,
Sho
p &
Was
hroo
m
Linak Colum
nsOffice, Shop &
Washroom
OFFICE, SHOP & WASHROOM HARDWARE Dimension data and specifications may change without notification.
Office, Shop & Washroom Hardware
P.34
Sit N
Sta
nd D
esks
Offic
e, S
hop
& W
ashr
oom
Sit N Stand D
esksOffice, Shop &
Washroom
Electronic Sit N Stand Desks
STRAIGHT SIT N STAND DESK FRAME AND ELECTRONICS KITDesk Frame:
• Available in either Black or White• Height adjustment - 610mm to 1245mm• Fully adjustable length - 1500mm to 2100mm• 140kg total lift capacity• Supplied with adjustable feet and all bolts to construct the desk frame• Kit includes all LINAK components including: 2 x DL11 columns, control box & cables• Frames are Australian made
L-SHAPE SIT N STAND DESK FRAME AND ELECTRONICS KITDesk Frame:
• Available in either Black or White• Height adjustment - 610mm to 1245mm• Fully adjustable length - 1800mm to 2100mm in both directions• Supplied with adjustable feet and all bolts to construct the desk frame• Kit includes all Linak components including: 3 x DL11 columns, control box & cables• Frames are Australian made
Description Desk Length: Min - Max Suit Desk Top Kit
Colour Code
Sit N Stand Desk DL11 Straight Kit* 1500mm - 2100mm 600mm to 900mm
Black 1-429-930White 1-429-931
*Desktop not included with kit
Description Desk Length: Min - Max Suit Desk Top Kit
Colour Code
Sit N Stand Desk DL11 L-Shaped Kit* 1800mm - 2100mm 600mm to 900mm
Black 1-429-932White 1-429-933
*Desktop not included with kit
ELECTRONIC SIT N STAND DESKSFeatures:
• 635mm electric adjustment• 610mm to 1245mm (from floor level)• 15 seconds from sit to stand• 5 year warranty on electronics• 10 year warranty on frame• All desks are fitted with LINAK’s anti-collision program PIEZO• Length of desk is fully adjustable to meet your design requirements
LINCOLN SENTRY OFFICE, SHOP & WASHROOM HARDWARE
Office, Shop & Washroom Hardware
P.35
Lina
k C
olum
nsOf
fice,
Sho
p &
Was
hroo
m
Linak Colum
nsOffice, Shop &
Washroom
Sit N
Sta
nd D
esks
Offic
e, S
hop
& W
ashr
oom
Sit N Stand D
esksOffice, Shop &
Washroom
Linak Columns
Dimension DL2:
LINAK A/S supplies the lifting column with either 8 or 3mm end plates. The DL2 can be prepared for built-in CBD6S.
Drawing no.: 0578006
(17.8)
36
SECTION A - A
75A
A
16
Mounting bracket (order no.: 0578006):
The mounting bracket can for example be used for placement of an extra actuator (tilt function), customised cover
(for encapsulation of the DL2), control box computer etc.
1139*
30639*
194
147
1139*
30639*
194
147
DL2 DESKLIFT COLUMNFeatures:
• 2 part rectangle lifting column• 8mm top and bottom plates for extra support• Best used for up/down tables
Technical Data Kit ColourWeight load p/column 150kgSpeed 20mm per secondInstall height 655mm - Includes 8mm top and base platesStroke length max 500mm (max height = 1155mm)Colour Natural anodised aluminium profiles and black painted end plates
Description CodeDL2 Desklift Column 1-429-888
*Add 8mm for each plate used to height measurement
SIT N STAND DESK SWITCH OPTIONS
Colour Measurements CodeBlack L = 94 x H = 25 x D = 19mm 1-429-911White L = 94 x H = 25 x D = 19mm 1-429-925
DPF1M - UP AND DOWN WITH MEMORY FUNCTION
Colour Measurements CodeBlack L = 130 x H = 25 x D = 19mm 1-429-913White L = 130 x H = 25 x D = 19mm 1-429-926
DPF1C - UP AND DOWN WITH MEMORY FUNCTION AND DISPLAY
Colour CodeBlack 1-429-908White 1-429-910
DPH - UP AND DOWN FUNCTION
Colour Measurements CodeBlack Ø = 72 x H = 24mm 1-429-915White Ø = 72 x H = 24mm 1-429-927
OFFICE, SHOP & WASHROOM HARDWARE Dimension data and specifications may change without notification.
Hinge Systems
Office, Shop & Washroom Hardware
P.36
Lina
k C
olum
nsOf
fice,
Sho
p &
Was
hroo
m
Linak Colum
nsOffice, Shop &
Washroom
Linak Columns
46
560
ø70
1210
ø70
46
560
ø70
1210
ø70
Dimensions:Standard version
Standard with PIEZO:
17 17.4
35.4
145
4xM6
10 46
63
17 2xM6
97
177
LINAK A/SDL11001
575 +5- 2
ø 57
1210 +8- 3
ø 70
+1 0
ø 63
.5
17
17.4
35.4
145
4xM6
17735.4
97
2xM6
63
46
17
560+5- 2
ø70+1 0
1210+8- 3
ø63.
5
ø57
1210
560
80
50
177
1210
560
80
50
177
97
177
DL11 DESKLIFT COLUMNFeatures:
• 3 part round lifting column• PIEZO™ Integrated Sensor• Reinforced column for extra strength and stability• PVC-free column for a more environmentally friendly product
Technical dataWeight load per column: 80kg
Speed: 38mm per secondInstall height: 560mmStroke length max: 650mm (max height = 1210mm)Colour: Black & White
Description CodeDL11 Desklift Column - Black 1-429-882DL11 Desklift Column - White 1-429-934
DL6 DESKLIFT COLUMNFeatures:
• 3 part lifting column• PIEZO™ Integrated Sensor• Reinforced column for extra strength and stability• PVC-free column for a more environmentally friendly product
Technical dataWeight load per column: 120kg
Speed: 38mm per secondInstall height: 560mmStroke length max: 650mm (max height = 1210mm)Colour: Black
Description CodeDL6 Desklift Column 1-429-881
LINCOLN SENTRY OFFICE, SHOP & WASHROOM HARDWARE
Office, Shop & Washroom Hardware
P.37
Lina
k C
olum
nsOf
fice,
Sho
p &
Was
hroo
m
Linak Colum
nsOffice, Shop &
Washroom
Linak Columns
1178
518
70
70
1178
518
70
70
DL17 DESKLIFT COLUMNFeatures:
• 3 part square inline column• PIEZO™ Integrated Sensor• Designed for smaller installations with 518mm install height• Designed for low built in designs• PVC-free column for a more environmentally friendly product
Technical dataWeight load per column: 70kg
Speed: 38mm per secondInstall height: 518mmStroke length max: 660mm (max height = 1178mm)Colour: Black
Description CodeDL17 Desklift Column 1-429-884
DL12 DESKLIFT COLUMNFeatures:
• 3 part rectangle lifting column• PIEZO™ Integrated Sensor• Designed for smaller installations with 518mm install height• Reinforced column for extra strength and stability
Technical dataWeight load per column: 70kg
Speed: 38mm per secondInstall height: 518mmStroke length max: 660mm (max height = 1178mm)Colour: Black
Description CodeDL12 Desklift Column 1-429-883
1178
518
100
60
1178
518
100
60
Lina
k Ac
cess
orie
s &
Sw
itche
sOf
fice,
Sho
p &
Was
hroo
m
Linak Accessories & Sw
itchesOffice, Shop &
Washroom
OFFICE, SHOP & WASHROOM HARDWARE Dimension data and specifications may change without notification.
Hinge Systems
Office, Shop & Washroom Hardware
P.38
Lina
k C
olum
nsOf
fice,
Sho
p &
Was
hroo
m
Linak Colum
nsOffice, Shop &
Washroom
Linak Columns
BASELIFT BRACKET
For mounting the Baselift to the floor
Description:
Date:All rights reserved
Linear Actuator Baselift
1 May 2014
Bottom view
Top view
7912
.5 12.5 415
10 396
1080
416
5.5
350
200
440
100
Side view
Description:
Date:All rights reserved
Linear Actuator Baselift
1 May 2014
Bottom view
Top view
7912
.5 12.5 415
10 396
1080
416
5.5
350
200
440
100
Side view
BASELIFT
Technical dataWeight load per Baselift: 150kgSpeed: 14mm per secondInstall height: 100mmStroke length max: 100mm (max height = 200mm)Colour: Grey
Description CodeBaselift 1-429-897
BASELIFT CLIPS WITH TAPE
For mounting the base cover to the Baselift
Clips
Description CodeBaselift Bracket 1-429-898
Description CodeBaselift Clips with Tape 1-429-899
Features:
• Perfect for kitchen cabinets or retail counters• Allows for a 100mm adjustment in benchtop height with just a push of a button• Adjustable feet for a further 15mm height
LINCOLN SENTRY OFFICE, SHOP & WASHROOM HARDWARE
Office, Shop & Washroom Hardware
P.39
Lina
k Ac
cess
orie
s &
Sw
itche
sOf
fice,
Sho
p &
Was
hroo
m
Linak Accessories & Sw
itchesOffice, Shop &
Washroom
Lina
k C
olum
nsOf
fice,
Sho
p &
Was
hroo
m
Linak Colum
nsOffice, Shop &
Washroom
Linak Accessories & Switches
Description CodeDeskline CBD6S 200W Control Box 1-429-895
Description CodeDeskline CBD6S 300W Control Box 1-429-896
DESKLINE CBD6S 200W CONTROL BOX
Features:
• Can be connected to 1 or 2Desklift / Baselift columns• The Control Box is designed with a soft start/stop function• The power consumption in standby mode is only 0.1W• Ultra low height of 38mm
DESKLINE CBD6S 300W CONTROL BOX
Features:
• Can be connected to 1, 2, 3 or 4 Desklift / Baselift columns• The Control Box is designed with a soft start/stop function• The power consumption in standby mode is only 0.1W• Ultra low height of 38mm
CONTROL BOX MAINS POWER CABLE
Features:
• 1 x required per Control Box• Australian plug• 3 meters long• Black
MOTOR CABLES
Features:
• 1 x required per column or Baselift• Connection of column to Control Box• Available in lengths of 500mm, 1000mm & 2000mm• Black
Type CodeControl Box Mains Power Cable 1-429-890
Length of Motor Cable Code500mm 1-429-9011000mm 1-429-9032000mm 1-429-891
OFFICE, SHOP & WASHROOM HARDWARE Dimension data and specifications may change without notification.
Office, Shop & Washroom Hardware
P.40
Lina
k Ac
cess
orie
s &
Sw
itche
sOf
fice,
Sho
p &
Was
hroo
m
Linak Accessories & Sw
itchesOffice, Shop &
Washroom
Linak Accessories & Switches
Description Code45° Bracket 1-429-919
Description Code90° Bracket 1-429-917
Mounting of the DPF:the dpf must be mounted via a mounting bracket. the mounting bracket comes in 4 different versions depending on how the panel should be mounted. Below are some examples on ways to mount:
Example 1: (Article number 914759)the panel is mounted with a 90° bracket and placed closed to the tabletop.
Example 3: (Article number 914760)the panel is mounted with a 45° bracket and placed at the edge of the tabletop.
Example 4: (Article number 914785)the panel is mounted with a 45° bracket and placed on a tabletop with angled front.
Example 2: (Article number 914757)the panel is mounted with a 90° bracket and placed with a distance to the tabletop.
To mount the panel: Just click the panel into the bracket and it is fixed.
Drawings of the mounting brackets:
Article number 914759
Article number 914760
Article number 914757
Article number 914785
Mounting of the DPF:the dpf must be mounted via a mounting bracket. the mounting bracket comes in 4 different versions depending on how the panel should be mounted. Below are some examples on ways to mount:
Example 1: (Article number 914759)the panel is mounted with a 90° bracket and placed closed to the tabletop.
Example 3: (Article number 914760)the panel is mounted with a 45° bracket and placed at the edge of the tabletop.
Example 4: (Article number 914785)the panel is mounted with a 45° bracket and placed on a tabletop with angled front.
Example 2: (Article number 914757)the panel is mounted with a 90° bracket and placed with a distance to the tabletop.
To mount the panel: Just click the panel into the bracket and it is fixed.
Drawings of the mounting brackets:
Article number 914759
Article number 914760
Article number 914757
Article number 914785
Mounting of the DPF:the dpf must be mounted via a mounting bracket. the mounting bracket comes in 4 different versions depending on how the panel should be mounted. Below are some examples on ways to mount:
Example 1: (Article number 914759)the panel is mounted with a 90° bracket and placed closed to the tabletop.
Example 3: (Article number 914760)the panel is mounted with a 45° bracket and placed at the edge of the tabletop.
Example 4: (Article number 914785)the panel is mounted with a 45° bracket and placed on a tabletop with angled front.
Example 2: (Article number 914757)the panel is mounted with a 90° bracket and placed with a distance to the tabletop.
To mount the panel: Just click the panel into the bracket and it is fixed.
Drawings of the mounting brackets:
Article number 914759
Article number 914760
Article number 914757
Article number 914785
Mounting of the DPF:the dpf must be mounted via a mounting bracket. the mounting bracket comes in 4 different versions depending on how the panel should be mounted. Below are some examples on ways to mount:
Example 1: (Article number 914759)the panel is mounted with a 90° bracket and placed closed to the tabletop.
Example 3: (Article number 914760)the panel is mounted with a 45° bracket and placed at the edge of the tabletop.
Example 4: (Article number 914785)the panel is mounted with a 45° bracket and placed on a tabletop with angled front.
Example 2: (Article number 914757)the panel is mounted with a 90° bracket and placed with a distance to the tabletop.
To mount the panel: Just click the panel into the bracket and it is fixed.
Drawings of the mounting brackets:
Article number 914759
Article number 914760
Article number 914757
Article number 914785
Mounting of the DPF:the dpf must be mounted via a mounting bracket. the mounting bracket comes in 4 different versions depending on how the panel should be mounted. Below are some examples on ways to mount:
Example 1: (Article number 914759)the panel is mounted with a 90° bracket and placed closed to the tabletop.
Example 3: (Article number 914760)the panel is mounted with a 45° bracket and placed at the edge of the tabletop.
Example 4: (Article number 914785)the panel is mounted with a 45° bracket and placed on a tabletop with angled front.
Example 2: (Article number 914757)the panel is mounted with a 90° bracket and placed with a distance to the tabletop.
To mount the panel: Just click the panel into the bracket and it is fixed.
Drawings of the mounting brackets:
Article number 914759
Article number 914760
Article number 914757
Article number 914785
Colour Measurements CodeBlack L = 94 x H = 25 x D = 19mm 1-429-911White L = 94 x H = 25 x D = 19mm 1-429-925
Colour Measurements CodeBlack L = 130 x H = 25 x D = 19mm 1-429-913White L = 130 x H = 25 x D = 19mm 1-429-926
DPF1M - UP AND DOWN WITH MEMORY FUNCTION
Features:
• Control panel for simple up and down or with memory• Available in black or white with chrome print• Comes with 1700mm cable• Suitable for desk mounting - Bracket sold separately (see below)
DPF1C - UP AND DOWN WITH MEMORY FUNCTION AND DISPLAY
Features:
• Control panel for simple up and down or with 3 memory positions• LED display for easy adjustment to known heights• Available in black or white with chrome print• Comes with 1700mm cable• Suitable for desk mounting - Bracket sold separately (see below)
MOUNTING BRACKETS FOR DPF CONTROL UNITS
Features:
• The DPF must be mounted via a mounting bracket• To mount the panel: Just click the panel into the bracket and it is fixed• Made from steel
90° DESK BRACKET
The panel is mounted with a 90° bracket and placed closed to the tabletop.
45° DESK BRACKET
The panel is mounted with a 45° bracket and placed at the edge of the tabletop.
LINCOLN SENTRY OFFICE, SHOP & WASHROOM HARDWARE
Office, Shop & Washroom Hardware
P.41
Lina
k Ac
cess
orie
s &
Sw
itche
sOf
fice,
Sho
p &
Was
hroo
m
Linak Accessories & Sw
itchesOffice, Shop &
Washroom
Switches and Controls
Colour CodeBlack 1-429-908White 1-429-910
Description CodeRemote Control and Receiver Kit 1-429-935
Colour Measurements CodeBlack Ø = 72 x H = 24mm 1-429-915White Ø = 72 x H = 24mm 1-429-927
DPH - UP AND DOWN FUNCTION
Features:
• Up and down function via the arrows• Available in black or white with chrome print• Comes with 1580mm black cable• Suitable for flush mounting
DPT - UP AND DOWN WITH MEMORY FUNCTION AND DISPLAY
Features:
• Control panel for simple up and down or with 3 memory positions• LED display for easy adjustment in either inches or cm• Available in black or white with chrome print• Comes with 1580mm cable• Suitable for flush mounting
REMOTE CONTROL AND RECEIVER KIT
Features:
• The wireless system is based on radio frequency technology and is perfect for TV lifts and table lifts where cable are undesired
• Kit includes 1 x wireless receiver, 1 x remote control handset, 1 x link cable (L2000mm) & 1 x backup switch