EVO Product Platform Pressure Transducers and Pressure Transmitters – L Series

www.StellarTech.com

Stellar_Sales@LORD.com

Rugged Performance You Can Count OnThe L Series (LS, LD and LF) pressure transducers and transmitters are designed using aerospace-proven processes and quality systems, bringing high performance and reliability levels in easily configured standard selections. These durable and environmentally robust pressure sensors are competitively priced and compact, with most versions available in a standard one-inch diameter package – making them the best choice for use in many test & measurement, oil & gas and industrial automation applications.

Single port (LS), dual port differential (LD) and flush diaphragm (LF) pressure sensing options

Line pressure ranges from 3 to 20,000 psi (gage, absolute or sealed) and differential pressures from 50 to 5,000 psi

Hermetically sealed, laser welded, stainless steel housings incorporating enhanced mechanical, electronic and environmental isolation

©2019 LORD Corporation OD PB8385 (Rev.0 6/19)

Standard Features for Pressure Sensor Technology

Thermal sensitivity - Thermal zero shift ±0.01% FSO/°F and zero balance ±1.0%

Hermetically sealed, laser welded, stainless steel enclosures (IP67/IP68)

Short circuit, reverse polarity and surge protection to 500 Vdc

Enhanced shock, vibration and EMI isolation in standard 1" diameter housing

Accepts fluids and gasses compatible with 17-4 or 300 Series stainless steel

Operating Temperature Range -65°F to +250°F

Factory calibration traceable to NIST

Standard Configurable Features and Options

Operating pressure range (up to 20,000 psi) and reference (Gage, Absolute, Sealed and Unidirectional or Bidirectional Differential)

“Low Level” (mV/V) and amplified (voltage or current) outputs

Selectable accuracy from ±0.25 (“standard”) to ±0.1% FSO (“high”)

Pressure ports including male and female NPT, flare and autoclave styles

Electrical terminations including MIL-DTL-26482, MIL-DTL-5015 and MIL-DTL-38999 integral connectors

Compensated temperature ranges including +70 to +170°F, -30 to +170°F and -65 to +250°F

Configurable options include output signal, pressure range, sensing accuracy, pressure ports, electrical terminations and compensated output temperature calibration range.