Upload
others
View
4
Download
1
Embed Size (px)
Citation preview
Everything you need for power flushing
Central Heating SolutionsPower flushing and water treatment chemicals from Kamco
Telephone help line: +44 (0) 1727 875020
f: +44 (0) 1727 875335
www.kamco.co.uk
Unit 9, Curo Park, Frogmore, St. Albans, Herts AL2 2DD UKe: [email protected]
Clearflow CF40 Evolution
Clearflow CF90 Quantum2
New, Improved Clearflow
Range
Single source supplier for the power flushing industry
More Power
Greater Capacity
Higher Flow Rates
For more
effective central
heating system
cleaning
Circulation pump adaptor
Neutral flushing chemical
Power flushing heater
Scale & corrosion inhibitor
Water analysis kit Pre-commission cleaner
Chemical injector Boiler noise silencer
pH & TDS meters Antifreeze
Infra red thermometer Leaksealer
Power flushingACCESSORIES
Power flushingCHEMICALS
Magnetic power flushing filter
The ultimate power flushing chemical
© K
amco
Power flushing accessories from Kamco
Telephone help line: +44 (0) 1727 875020
FIRST AIDFull parts and servicing facility to ensure your
pump is kept in the best of health.
CombiMag power flushing filterRemoves black iron oxide contamination from the water during a power flush, using a powerful magnet. Reduces flushing time, increases efficiency, and saves water. Transparent cylinder gives visual indication to engineers and householders of the quantity of debris removed, and indicates when magnet needs cleaning. Integral bypass, to enable circulation to continue whilst the magnet is cleaned.
CP2 circulator pump head adaptor
Enables power flushing pumps to be connected onto the body of standard heating system circulator pumps, after removal of the motor
head, reducing set-up time. When used with a combination boiler the primary water side of the plate heat exchanger can be flushed without removal from the boiler casing. Fits many domestic pumps including Grundfos Selectric, Circulator Pumps Ltd, Myson, Terrier, Dab & Wilo Gold.
CombiHeat power flushing heaterWhen used in conjunction with a CombiMag cylinder, enables system water to be heated, boosting flushing chemical efficiency when the boiler is not operational. Speeds up power flushing and enables engineers to check radiators for even heat distribution.
Radhammer vibrator toolUsed with an SDS drill to apply high frequency vibration to clogged up radiators. Loosens compacted debris and sludge for removal during a power flush. Improves cleaning efficiency.
Systemsure IK6 injector unitEnables liquid corrosion inhibitors, flushing chemicals, and boilernoise suppressants to be injected into the main flow of heating systems. Injects chemicals through either the air bleed valve of a radiator or a combi filling loop. Suitable for both unvented and sealed systems.
Plate heat exchanger adaptor setEnables power flushing pumps to connect onto plate heat exchangers so that they may be flushed or descaled after removal from the boiler. Suitable for many combi plate heat exchangers.
Infra-red laser thermometerThe engineer’s ‘eye’ inside a heating system; gives an instant temperature reading
of radiator and pipe work surfaces. Identifies problem radiators, and the progress and efficiency of a power flush.
EcoTestr electronic TDS meterEnables comparison of TDS levels between mains water and dump water during flushing, to confirm the efficiency of a power flush. The TDScan meter can also be used to ensure correct dosing of inhibitor or flushing chemical into a system of unknown volume.
EcoTestr electronic pH meterUsed to check system water for neutral pH after a power flush, ensuring that all residues of acidic flushing chemicals have been removed.
Turbidity tubeUsed to check and demonstrate the clarity of system water after a power flush, giving a measurable standard that suspended debris has been removed.
Systemsure water analysis kit
Enables engineers to check system water for corrosion and contaminants, to understand the causes of problems, and to select the appropriate treatment to cure them and prevent future system failures.
Pipestoppers blanking plugs
Enable expansion and cold feed pipes to be quickly capped off before power flushing a system. Once inserted into a pipe and twisted a few times, they will hold 10 bars pressure.
Electric syphon pumpA compact time saving syphon pump used to empty f & e tanks, toilet bowls, blocked up sinks etc, with no effort or mess.
Waterproof maintenance matA 1350 x 2000mm waterproof maintenance mat for use under a power flushing pump to keep floors clean and prevent accidental damage.©
Kam
co
Power flushing accessories from Kamco
All Clearflow pumps come with a full starter kit, ready to go to work
f: +44 (0) 1727 875335
www.kamco.co.uk
Unit 9, Curo Park, Frogmore, St. Albans, Herts AL2 2DD UKe: [email protected]
Power flushing has evolved further, with the all newClearflow CF40 Evolution and improved Clearflow CF90 Quantum2 - more power, more capacity
CF40 EVOLUTION starter kit CF90 QUANTUM2 starter kit
Which pump do you need?The CF40 Evolution’s high flow rate handles systems up to 20-25 radiators over 2/3 floors, but the CF90 Quantum2 does this and more, going further, tackling larger systems, or just simply finishing those standard jobs quicker.
For any given system, the higher the flow rate, more debris will be removed, making the CF90 Quantum2 the ultimate in power flushing pumps.
With Kamco CLEARFLOW power flushing pumps you get:
• Ultra high flow rates for maximum cleansing power.
• Free training course with every pump.
• Kamco help line support, service workshop.
• Guaranteed future spares availability.
• Instantaneous flow reverser.• Reversible dumping facility.• Acid proof - descales
combination boilers, water heaters, and other equipment.
• 7 part hose set and fittings ready assembled.
• Extreme portability - wheel, or carry.
• Run dry capability; 75°C operation.
• Starter pack of chemicals for 2+ jobs.
• Hose carry container. • Free mainland delivery.• Promotional leaflets. • Link to your website.
Clearflow CF40 Evolution
Clearflow CF90 Quantum2
The
ultimate power flushing
pump!
Don’t just flush it... Kamco it!©
Kam
co
Stockist:
Central Heating Solutions
Power flushing and water treatment chemicals from Kamco
Telephone help line: +44 (0) 1727 875020
f: +44 (0) 1727 875335
www.kamco.co.uk
Unit 9, Curo Park, Frogmore, St. Albans, Herts AL2 2DD UKe: [email protected]
Performance
tested!
The most powerful flushing chemical you can buy!
Power Flush FX2one-shot power flushing and descaling chemical
A very powerful flushing chemical that enables heating engineers to thoroughly cleanse a heating system in just one visit. It is designed for use with power flushing pumps, and is the product to choose for the most rapid and effective results.
Power Flush FX2 rapidly dissolves and mobilises rust, sludge, corrosion and hard water deposits.
It may be used with steel, cast iron, stainless steel, copper, brass, bronze and plastics, but not aluminium.
Neutralising CrystalsUsed in conjunction with Power Flush FX2 to ensure neutralisation of any residues left after FX2 has been flushed to waste.
Hyper-Flushneutral pH power flushing liquid
HYPER-FLUSH has extra solvency power to penetrate, loosen and dissolve rust, sludge, corrosion, and scale deposits, during normal operation of the system.
HYPER-FLUSH may be used on systems which have boilers with aluminium heat exchangers, or have aluminium radiators. It is suitable for use on older systems showing signs of severe neglect, (when Power Flush FX2 may be considered too powerful) and as a pre-treatment for systems with severe flow problems, prior to power flushing.
Suitable for use with all metals and plastics commonly used in heating systems.
Systemsafe-DMcorrosion & scale inhibitor
Systemsafe-DM is a high quality inhibitor which gives long term protection to central heating systems, and prevents internal corrosion, scale deposition and boiler noises. It extends the life of systems, and maintains operational efficiency.
Systemsafe-DM carries the Buildcert / DWTA logo, proof that it has passed a tough performance test in a laboratory independently monitored by Buildcert.
System-Hushboiler noise cure
Solubilises baked on corrosion and limescale deposits which can accumulate on boiler heat exchangers, causing kettling and other boiler noises.
SYSTEM-HUSH is added to the system water and functions during normal system operation. It is not necessary to drain SYSTEM-HUSH from the system.
System Pre-Cleanpre-commission cleaner
Used to remove installation debris and foulants such as flux, jointing compounds, copper swarf, oil, grease and casting sand from new and modified heating systems.
It neutralises aggressive flux residues to prevent pinholing of radiators, and conditions and prepares metal surfaces of heating systems in order that corrosion inhibitors give the best effect.
Freezbreaker LTnon-toxic antifreeze
Low-toxicity antifreeze additive to protect heating and cooling systems from freezing at sub zero temperatures. Depending on dosage rate, FREEZBREAKER can give protection as low as -32° C.
Suitable for use with all materials used in heating and cooling systems, including aluminium.
SystemSeal leak sealer
Cures leaks in both vented and sealed central heating systems. SystemSeal is dispersed by the system water and will seal leaks and weeps even in difficult to reach areas. Doesn’t block pumps, valves, or air vents, and is effective in maintaining pressure in sealed systems.
Suitable for use with all metals and plastics commonly used in heating systems.
© K
amco