Upload
ngotuyen
View
215
Download
0
Embed Size (px)
Citation preview
Bego ............................................................... 8Burs - Komet ............................................18 Coltene ........................................................ 11Dreve ............................................................19DVA ...............................................................20
General ........................................................14Kavo .............................................................16-17Morita ..........................................................12Ray Foster ..................................................15Scheu .....................................................10,13
Vertex ............................................................. 9Vita..............................................................2-7
JU
LY
-SE
PT 2
01
2
PP: 255003/09485
E V E R Y T H I N G
LABORATORYLABORATORY
Two groups recently visited in Bad Sackingen, Germany for intensive training.
TRIP REPORT
VITAPAN Plus Teeth DETAILS ON PAGE 3
During the months of May and June, two groups of Australasian customers visited VITA in Bad Sackingen, Germany. SEE FULL STORY ON PAGE 2
JULY-SEP 2012 VISIT YOUR LOCAL HENRY SCHEIN HALAS SHOWROOM ORDERS 1300 65 88 22 WWW.HENRYSCHEIN.COM.AU2
VITA
Teeth Promotion Report BackDuring the months of May and June, 2 groups of Australasian customers visited Vita in Bad Sackingen, Germany. The trip comprised of 3 days of intensive teeth training as well as a visit to the Vita Tooth Factory and distribution Centre.
In addition to the training, the groups were entertained and enjoyed trips to France, Basel and the Black Forest region.
Brett & Anne Hancock and Cindy & Blake Comans
Bill Hizart hard at work
May Course Group
April Course Group
Rick Bromley, Jodi Moranda & Mark Mclennan
Marina Nemcek enjoying Black Forest Cake
in the Black Forest
Mike Niterl & Nolan Ellis
JULY-SEP 2012 VISIT YOUR LOCAL HENRY SCHEIN HALAS SHOWROOM ORDERS 1300 65 88 22 WWW.HENRYSCHEIN.COM.AU 3
VITA
Brett & Anne Hancock and Cindy & Blake Comans
Vitapan Plus
Optimum Interior – Perfect Exterior $40.75
Progress is the sum of established achievements and new developments. In keeping with this maxim, VITA has now modernised the classical Vitapan Teeth and given it a new, future orientated design with further development of anatomical features.
• Vitapan Plus forms the perfect synthesis of esthetics and function.
• Vitapan Plus is the result of Vita’s consistent development in response to your requirements.
• Vitapan now offers an even greater PLUS
Vitapan Plus – Streamlined assortment, maximum variety
Vitapan Plus is available in Classical Shades A1 – D4
10 Upper Anterior and 5 lower Anterior Moulds and can be combined with Physiodens, Lingoform, Vitapan Cuspiform and Vitapan Synoform Posterior moulds.
VITAPAN PLUS®
VITA PHYSIODENS®
VITA LINGOFORM®
VITAPAN CUSPIFORM
VITAPAN SYNOFORM
CAN BE COMBINED WITH
JULY-SEP 2012 VISIT YOUR LOCAL HENRY SCHEIN HALAS SHOWROOM ORDERS 1300 65 88 22 WWW.HENRYSCHEIN.COM.AU4
VMK Master PorcelainVITA porcelains have always been known for their vitality, consistent quality, shade fidelity and accuracy, and VITA VMK Master is no different.
This brand new porcelain offers the lab technician, the dentist and the patient exceptional physical properties, handling characteristics and, due to its fine structure, clinical wear characteristics that mimic natural tooth enamel. The ever-growing demands on the functionality and aesthetics of metal ceramic restorations now pose the challenge of developing materials which enable the dental technician to achieve a convincing result with relatively little effort. VMK Master meets that challenge.
• Accurate and outstanding esthetic results with traditional layering technique
• Wide selection of additional porcelains, including Luminaries to enhance fluorescence, Translucent porcelains to reproduce the translucency of natural tooth enamel, Neck Modifiers to simulate the cervical third, Gingival porcelains to simulate tissue color, and Opal and Pearl modifiers to achieve true youthful and bleached teeth
• Available in VITA 3D-Master® and Vitapan® Classical A1 – D4 shades
• A CTE of 13.1 – 13.6 x 10-6 K-1,ideal for veneering metal frameworks that have a coefficient of thermal expansion (CTE) in the range of 13.8 – 15.2 x 10-6.
VMK Master Standard Set 3D-MasterPowder Kit $3190Paste Kit $3644Basic set for the reproduction of the 3D-MASTER shades.
Quantity Content Material1 12 g Wash Opaque WO5 12 g Opaque OP1-OP526 12 g Opaque Dentine 1M1-5M326 12 g Dentine 1M1-5M32 12 g Enamel EN1, EN31 12 g Translucent T41 12 g Window WIN3 12 g Cervical CE1-CE35 12 g Neck N1-N52 12 g Corrective COR1-COR21 50 ml Vita Modeling Fluid1 50 ml Vita Modeling Fluid RS1 50 ml Vita Opaque Fluid1 piece Vita Linearguide1 pack Shade Indicator for 3D-MASTER1 pack Shade Indicator STANDARD1 pack Crown Stands A + B + C1 pack Firing Trays G1 piece Vita Modisol
Instructions for use. *Also available in 26 shades with Opaque Paste.
VITA
JULY-SEP 2012 VISIT YOUR LOCAL HENRY SCHEIN HALAS SHOWROOM ORDERS 1300 65 88 22 WWW.HENRYSCHEIN.COM.AU 5
VITA
VMK Master 10 Color Set 3D-Master Powder Kit $1979Paste Kit $2370
Reduced basic set with the ten most common 3D-MASTER shades. Quantity Content Material1 12 g Wash Opaque WO4 12 g Opaque OP1-OP410 12 g Opaque Dentine **10 12 g Dentine **2 12 g Enamel EN1, EN31 12 g Translucent T41 12 g Window WIN3 12 g Cervical CE1-CE35 12 g Neck N1-N52 12 g Corrective COR1-COR21 50 ml Vita Modeling Fluid1 50 ml Vita Modeling Fluid RS1 50 ml Vita Opaque Fluid1 piece VITA Linearguide1 piece Shade Indicator for 3D-MASTER1 piece Shade Indicator STANDARD1 pack Firing Trays G1 piece Vita Modisol
Instructions for use* Also available with Opaque Paste ** Consisting of 1M1, 2L1.5, 2M1, 2M2, 2R2.5, 3L1.5, 3M1, 3M2, 3M3, 4M2.
VMK Master Starter Set 3D-Master (2M2, 3M2)
Powder Kit $220
Paste Kit $330 Two-color set Quantity Content Material2 12 g Opaque OP2, OP32 12 g Opaque Dentine 2M2, 3M22 12 g Dentine 2M2, 3M21 12 g Enamel EN11 12 g Translucent T41 50 ml Vita Modeling Fluid RS1 50 ml Vita Opaque Fluid1 pack Shade Indicator Stick 2M21 pack Shade Indicator Stick 3M2Instructions for use* Also available with Opaque Paste
$200
$300
JULY-SEP 2012 VISIT YOUR LOCAL HENRY SCHEIN HALAS SHOWROOM ORDERS 1300 65 88 22 WWW.HENRYSCHEIN.COM.AU6
VITA
VMK Master Bleached Color Set Very light shades to reproduce bleached teeth.
Powder Kit $390
Paste Kit $488
Quantity Content Material1 12 g Opaque OP0
3 12 g Opaque Dentine 0M1-0M3
3 12 g Dentine 0M1-0M3
1 12 g Enamel EN1
1 12 g Translucent T4
1 50 ml Vita Modeling Fluid RS
1 50 ml Vita Opaque Fluid
1 piece Bleached Shade Guide Group 0M
Instructions for use. * Also available with Opaque Paste.
VMK Master Additional Set
Additional materials for achieving special shade effects and
individualizing the restoration $1781 Quantity Content Material8 12 g Translucent T1-T8
8 12 g Dentine Modifier DM1-DM8
6 12 g Luminary LM1-LM6
6 12 g Margin MN, M1-M5
1 12 g Pearl Translucent PLT1
1 12 g Opal translucent OT1
1 50 ml Vita Modeling Fluid
1 piece Shade Indicator for Translucent
1 piece Shade Indicator for Margin/Gingiva
1 piece Shade Indicator for Dentine Modifier/Luminary
VMK Master Gingiva Set
Powder Kit $345 Paste Kit $472
Natural-looking gingiva pastes
Quantity Content Material5 12 g Gingiva G1-G5
2 12 g Gingiva Opaque GOL-GOD
1 piece Shade indicator for Gingiva/Margin
Instructions for use. * Also available with Opaque Paste.
JULY-SEP 2012 VISIT YOUR LOCAL HENRY SCHEIN HALAS SHOWROOM ORDERS 1300 65 88 22 WWW.HENRYSCHEIN.COM.AU 7
VITA
VMK Master Standard Set ClassicalBasic set for the reproduction of the VITA classical A1-D4 shades
Powder Kit $2853Paste Kit $4001
Quantity Content Material1 12 g Wash Opaque WO16 12 g Opaque A1-D416 12 g Opaque Dentine A1-D416 12 g Dentine A1-D42 12 g Enamel EN1, EN21 12 g Translucent T41 12 g Window WIN3 12 g Cervical CE1-CE35 12 g Neck N1-N52 12 g Corrective COR1-COR21 50 ml Vita Modeling Fluid1 50 ml Vita Modeling Fluid RS1 50 ml Vita Opaque Fluid1 piece Shade Indicator Classical1 piece Shade Indicator STANDARD1 piece Vita Classical A1-D4 Shade Indicator1 pack Crown Stands A + B + C1 pack Firing Trays G1 piece Modisol
Instructions for use* Also available in 16 shades with Opaque Paste
VMK Master Starter Set Classical (A2, A3) Powder Kit $220
Paste Kit $330
Quantity Content Material 2 12 g Opaque A2, A32 12 g Opaque Dentine A2, A32 12 g Dentine A2, A31 12 g Enamel EN11 12 g Translucent T41 50 ml Vita Modeling Fluid RS1 50 ml Vita Opaque Fluid1 pack Shade Indicator Stick A21 pack Shade Indicator Stick A3
Instructions for use. * Also available with Opaque Paste.
$200
$300
JULY-SEP 2012 VISIT YOUR LOCAL HENRY SCHEIN HALAS SHOWROOM ORDERS 1300 65 88 22 WWW.HENRYSCHEIN.COM.AU8
BEGO
Fornax T
Compact benchtop casting machine with high performance induction heating of 3600 VA for fast, time-saving use. New, user friendly operating panel with display and soft keys. High output reserves with low power consumption of just 16AMPS.
Casting temperature of up to 1550°C – ideal for all commercially available dental alloys (not suitable for Titanium).
$14750
WirovestInvestment Material for Partial Dentures.• The classic BEGO partial denture investment material
• Proven worldwide, very smooth surface, for gel and silicone duplication
• Special investment material for gel and silicone duplication with conventional preheating
• Over 40 million partial denture frames have been fabricated worldwide with Wirovest
45 x 400g Sachets $99Begosol Mixing Liquid 1L $29
Fornax Ceramic CruciblesThe new BEGO ceramic crucibles for Fornax® set the highest standards• An innovative manufacturing procedure for crucibles that are resistant to high
temperature, developed in cooperation with scientific institutes, produces an extremely homogeneous material structure contributing to consistently reproducible accuracy of castings.
• The exc eptionally smooth inner surface of the ceramic crucible facilitates the flow of the molten metal• The high resistance of the new material to thermal fluctuations guarantees
a long service life.
Fornax T Ceramic Crucibles #52482 x 6 pieces $162Fornax Crucible Graphite Insert #52454 x 6 pieces $132
Triton SLA Wet and Dry Steam Cleaner
• Environmentally sound, intensive and versatile
• High-performance unit with “wet” and “dry steam” setting
• Fixed water connection with BEGO full demineralization cartridge
• Steam pressure of approx.3 bar for gentle but thorough cleaning.
$8107
$90
$26
JULY-SEP 2012 VISIT YOUR LOCAL HENRY SCHEIN HALAS SHOWROOM ORDERS 1300 65 88 22 WWW.HENRYSCHEIN.COM.AU 9
VERTEX
CastapressCastapress is a self polymerizing pouring/casting type denture base material also suitable for repair, relining, rebasing and extensions of partial dentures.Pouring time (at 22 ° C) up to 3 minutesDough time (at 22° C) 6 minutes Curing time 30 minutes at 55°C and 2.5 bar
Available in shade #5 pink veined & clear.
Powder Liquid
500g $79 250ml $371000g $126 500ml $602000g $243 1000ml $1104000g $425 2000ml $190
TrayplastTrayplast is a self polymerizing acrylic for individual impression trays. This acrylic can be polymerized in 10 minutes using a pressure vessel.
Dough time (at 22° C) mix in a silicone bowl until a dough is reachedWorking time (at 22° C) use directlyCuring time 10 minutes at 55°C and 2.5 bar
Available in green or white
Powder Liquid
500g $35 250ml $182000g $125 1000ml $55
DivosepAn alginate based separation solutionDivosep blue is suitable for both packing/pressing technique and cast moulding. The high quality of the raw materials guarantees optimum separation with both techniques. Divosep red is a quick drying liquid which forms a skin and is suited to light work such as casting dentures.
Divosep orange is slow drying and as a result penetrates deep into the plaster. This separating agent is ideally suited to the packing/pressing.
1L $21.95
Scotchbrite grinding wheelsAvailable in: Rough – brown, Medium – purple, Fine – gold $3.99ea
JULY-SEP 2012 VISIT YOUR LOCAL HENRY SCHEIN HALAS SHOWROOM ORDERS 1300 65 88 22 WWW.HENRYSCHEIN.COM.AU10
Cutting BursCutting Bur white: spiral cutting bur for quick, neat cutting of all hard pressure moulding materials.
#3214 pack of 6 $65HM carbide cutter yellow: triangular cutting bur made of carbide, used for cutting hard pressure moulding materials
#3369 pack of 6 $114HM Tricutter fine green: fine triangular cutting bur for interdental finishing of splints
#3370 pack of 6 $115Finishing Bur red: square cutting bur made of special soft alloy that will not damage clasps & wire
#3377 pack of 6 $95
TrimmersBioperm trimmer Blue: for trimming & initial polishing of soft elastic foils & sandwich materials
#3226 pack of 2 $39Polyfix disc black: same application as above
#3371 pack of 1 inc mandrel $12Osamu polisher white: final polishing of retainers as well as soft elastic foils & sandwich material
#3247 pack of 2 $29
DimoStable and flexible trimming wheel with extended working time in three different grains for trimming and pre-polishing of laminate foils, mouthguards, ortho plates and elastomers.10 wheels plus 1 mandrel
S-3382 Brown, coarse $45
S-3383 Green, medium $45
S-3384 Maroon, fine $45
Dimo ProTriiming wheel made of latex filled abrasive with extreme long working time. Used for final trimming or polishing maouthguards, ortho plates & elastomers.10 wheels
SCHEU
$105
$41
$41
$41
JULY-SEP 2012 VISIT YOUR LOCAL HENRY SCHEIN HALAS SHOWROOM ORDERS 1300 65 88 22 WWW.HENRYSCHEIN.COM.AU 11
COLTENE
Biosonic Solutions The solution to your cleaning needs! BioSonic Super Concentrate General Purpose UC30For contaminants like blood, debris, saliva and general cleaning. For instruments, crowns, bridges, dentures and ultrasonic scaler tips.
473 ml MeterDose Bottle equals 30 ltrs $30
BioSonicGeneral Purpose with corrosion protection UC31Combines the proven cleaning action of a BioSonic solution with corrosion protection in the ultrasonic bath. easy to use unit dose packets make 2–4 liters of solution each.
Dispenser box contains 20 unit dose packets – makes up to 76 ltres of solution. $30
BioSonic Enzymatic Ultrasonic Cleaner UC32Used for contaminants like protein soils (dried blood, tissue, saliva) and general cleaning. Effectively breaks down and loosens hardened debris on instruments. For instruments, crowns, bridges, dentures.
236 ml MeterDose Bottle makes 30 litres. $30
BioSonic Plaster and Stone Remover UC34Powder Concentrate used for contaminants like plaster and stone. Items to be cleaned are dentures, partials, casting, denture flasks, mixing bowls and non-aluminum articulators.
840 g jar makes 11.4 litres $32
BioSonic Germicidal Ultrasonic UC38Cleaning Concentrate used for contaminants like blood, debris, saliva and for general cleaning. Cleans instruments as it disinfects ultrasonic bath. Items to be cleaned are instruments, crowns & bridges.
236 ml MeterDose Bottle equals makes 30 litres $32
Biosonic Ultrasonic CleanersAn essential part of your Infection Control System.
UC125
Largest tank capacity in its class $1100• LCD Technology offers customized operation• Operates at a very quiet 63dB• Basket included
UC 50 DB $699• Fits any work surface • 2L capacity accommodates double ended instruments or two 600 ml beakers• Basket included
UC300
A large capacity cleaner for your practice $2100• Clean both your instruments and dental appliances simultaneously• Fill capacity 11L• Greater cleaning efficiency
Buy UC300 Get UC310 Basket FREE!
JULY-SEP 2012 VISIT YOUR LOCAL HENRY SCHEIN HALAS SHOWROOM ORDERS 1300 65 88 22 WWW.HENRYSCHEIN.COM.AU12
MORITA / KURARAY
Alloy Primer KURARAY
Alloy Primer is a metal primer used to increase the bond strength of composite and acrylic resins to gold, base and semi-precious metals, titanium and other dental alloys.It eliminates the necessity of tin–plating and enables excellent bonding to metal surfaces. Simple to use, just apply one coat of Alloy Primer to sandblasted metal surface and leave it for a few seconds, then start adhesion procedure as usual.
$79.90
8x Spatula MORITA $25
Mixing Bowls MORITA Morita Flexible Mixing bowl
Large – 115mm $8Ex Large – 1300mm $9
S-Cutters HORICO
TC Cutters in black for the Milling Technique• Available in 1°, 2° and 0° with 190 tooth(cross cut normal)• 0° with the 134 toothing (helical cross cut) for non precious metals and Titanium
134 toothing can be used with minimal pressure which goes easy on your wrist. The toothing leaves a very fine grinding surface and also has a long user life.
Tc cutters offers an exceptional price / performance ratio $22 ea
SAVE 20%
SAVE 20%
JULY-SEP 2012 VISIT YOUR LOCAL HENRY SCHEIN HALAS SHOWROOM ORDERS 1300 65 88 22 WWW.HENRYSCHEIN.COM.AU 13
SCHEU
Ministar S with Scanner Technology The new generation of the successful handy pressure moulding machine now equipped with scan technology and 4 bar working pressure. The coded pressure moulding plate is read by the scanner, allowing programming of all important data such as heating time, temperature and cooling time. This ensures precise pressure moulding results in record time thanks to the extremely fast, patented heater and high working pressure.
$3800
Two degrees of hardness in one plateSAVE 20%
SAVE 20%
S-S-S-
S-S-S-
$3600
JULY-SEP 2012 VISIT YOUR LOCAL HENRY SCHEIN HALAS SHOWROOM ORDERS 1300 65 88 22 WWW.HENRYSCHEIN.COM.AU14
GENERAL
Pattern Resin Modelling resin for making custom attachments, fixations, implant abutments or resin dies for electroforming technique. Specially developed for the brush technique.
Kit Powder 100g & Liquid 105ml $109.80
Liquid 105ml $44
Fuji Rock EP GC
High quality die stone with high precision, outstanding edge hardness and high pressure stability. Available in Golden Brown, white and pastel.Advantages:
• Excellent physical properties
• Short mixing time (about 1 minute)
• Extended working time (over 8 minutes)
• Short setting time (only 12 minutes)
• Removable from cast after just 30 minutes
• Highly fluid “thixotropic” properties
• Low expansion (less than 0.08%)
• Precise detail reproduction
• Perfect fit with the prosthesis
5kg $65.90
Buy 5 Get 1 FREE!
Waxie Paste DVA
DVA’s Amazing Waxie Paste consists of a soft,”waxie like” material, packed in a 4g jar.That can be applied to critical areas such that it leaves a positive mark against any opposing surface with which it may be caused to contact. While rather soft by nature, Waxie Paste’s unique consistency and fine powdered particles allow a brush application of an extremely thin layer of material to provide the most precise marking of interferences possible.
Packed in a 4g jar, the soft paste like material is easily and prudently brushed onto the desired working surface in a thin (or thick) later as desired. After work is completed, Waxie Paste can be easily and totally removed from the crown or model as it is water soluble.
Waxie Paste 4g Jar $20
SAVE 10%
JULY-SEP 2012 VISIT YOUR LOCAL HENRY SCHEIN HALAS SHOWROOM ORDERS 1300 65 88 22 WWW.HENRYSCHEIN.COM.AU 15
RAY FOSTER
Dental Lathe PR90 Dynamically balanced for smooth, quiet operation and quality built for years of reliable service. It delivers a powerful 1/3 HP in a totally enclosed, dust and splash-proof housing for trouble free polishing and grinding. Our unique Variable Speed Lathe provides up to 4,000 RPM, giving you more power and speed than ever in a counter top dental lathe.
$1099
Wax Heater WH41
The electric wax heater features three compartments, with two measuring 2-1/8” X 1-3/4” x ” deep, and one 2-1/4” x 3-3/4” x ” deep. They have a hinged lid to keep out contaminants, indicator lights, and an ON/OFF switch. Thermostat control with temperature adjustments from 100°F through 250°F.
$248
High Speed Alloy Grinder AG04
For 60 years Foster High Speed Alloy Grinders have been providing precise, efficient, and reliable service worldwide. Rugged and comfortable to use, the Foster Alloy Grinder is a proven time saver when it comes to tasks like sprue separating, or finishing and polishing chrome alloy framework.
All models feature a fully adjustable safety shield and light assembly, adjustable working height, and large work area for operator comfort. Each machine is equipped with a precision high-speed automatic spindle, which permits the changing of tools without stopping the motor.
• High and Low belt controlled speeds
• Adjustable spindle working height
• Heavy duty, 1/3 HP capacitor start motor in a totally enclosed housing
• Self-contained dust collector
$2299
Dust Collector CDC2
The Cyclone Dust Collector is a powerful and efficient dust collector for use in the dental laboratory, designed for trouble-free performance and heavy-duty operation. Quiet, portable and compact, the dust collector is ideal for under-the-counter operation.
Unit size 12” x 12” x 19.5” high $1399
SAVE 10%
$220
JULY-SEP 2012 VISIT YOUR LOCAL HENRY SCHEIN HALAS SHOWROOM ORDERS 1300 65 88 22 WWW.HENRYSCHEIN.COM.AU16
KAVO
FLEXspace - Laboratory FurnishingsFlexible, modular laboratory furnishingsHeight adjustment: 82 - 94,5 cmFlexible workstation for right- or left-handers• Air nozzle panel, fixed panel, drawer units and• container for dust extraction motor (SMARTair)• can be mounted at any time either on the right or on the left side.Resin coated metal frameQuick installationIntegration of KaVo Dust Extraction Systems and accessoriesBroad range of colors and materials.
FLEXspace - Preconfigured Packages• The new FLEXspace preconfigured packages offer maximum profitability
and functionality.• The package configuration cannot be changed.• For the front colors you can choose between the 4 mostly sold FLEXspace
colours.• Front colours: Gentian Blue, Wave, Bordeaux, Sunflower• Worktop Colours: laminate Birch, Hazelnut, Anthracite, Carrara
FLEXspace Comfort Single WorkstationConsisting of:1 x Basic Element1 x Waste Drawer 501 x SMARTair Standard1 x Suction Hood in Front of Bench1 x Suspended Drawer Unit 2221 x Worktop, Straight, Birch2 x Side Panels MetalGas/Electrical/Air ConnectionsSafety Bunsen Burner Tube
KV-1.003.6375 POA
FLEXspace Function Package Single WorkstationConsisting of:1 x FLEXspace Light 52201 x Work Shelf Base2 x Arm Rests Straight
KV-1.003.6381 POA
JULY-SEP 2012 VISIT YOUR LOCAL HENRY SCHEIN HALAS SHOWROOM ORDERS 1300 65 88 22 WWW.HENRYSCHEIN.COM.AU 17
KAVO
FLEXspace Elegance Single Workstation
Consisting of:1 x Basic Element1 x Waste Drawer 501 x SMARTair standard1 x Suction Hood in Front of Bench1 x Suspended Drawer Unit 1231 x Optional Drawer1 x Worktop, Straight, Birch1 x ROCKdent Insert2 x Side Panels Metal/DecorGas/Electrical/Air ConnectionsSafety Bunsen Burner Tube
KV-1.003.6376 POA
FLEXspace Standard Comfort 3 Place Workstation Consisting of:3 x Basic Element3 x Waste Drawer 503 x Suction Panels1 x EXTRAmatic1 x Back Panel EXTRAmatic3 x Suction Hood in Front of Bench3 x Suspended Drawer Unit 2223 x Worktop, Straight, Birch1 x Worktop Extension at Double Bench, Laminate1 x 90° Side ShelfGas/Electrical/Air Connections3 x Safety Bunsen Burner Tube
KV-1.003.6377 POA
FLEXspace Standard Elegance 3 Place WorkstationConsisting of:3 x Basic Elements3 x Waste Drawer 503 x Suction Panels1 x EXTRAmatic1 x Back Panel EXTRAmatic3 x Optional Drawer3 x Suction Hood in Front of Bench3 x Suspended Drawer Unit 1233 x Worktop, Straight, Laminate Birch3 x ROCKdent Inlay1 x Worktop Extension at Double Bench, Laminate1 x 90° Side Shelf3 x Side Panels, Metal/DecorGas/Electrical/Air Connections3 x Safety Bunsen Burner Tube
KV-1.003.6379 POA
JULY-SEP 2012 VISIT YOUR LOCAL HENRY SCHEIN HALAS SHOWROOM ORDERS 1300 65 88 22 WWW.HENRYSCHEIN.COM.AU18
NEW LOWER Prices on Komet Laboratory Burs
FIG. H251GE-060 FIG. H251EA-060
FIG. H77E-029X5 FIG. H364RE-023X5 FIG. H79SGE-050-070 FIG. H71E-010-023X5
FIG. H30-006-016x5 FIG. H71-010-023x5
Acrylic & Plaster Cutters General
Plaster Cutter Milling
SAVE$10
SAVE$10
SAVE$10
SAVE$10
SAVE$10
SAVE$10
SAVE$10
SAVE$20
SAVE$10
SAVE$10
SAVE$8
SAVE$30
SAVE$30
SAVE$30
SAVE$6
SAVE$40
Was $48Now $38
Was $53Now $43
Was $48Now $38
Was $48Now $38
Was $48Now $38
Was $53Now $43
Was $48Now $38
Was $126Now $106
Was $48Now $38
Was $48Now $38
Was $38Now $30
Was $157Now $127
Was $177Now $147
Was $158Now $128
Was $30Now $24
Was $217Now $177
Acrylic, Plaster & Metal Alloy Cutters
Quality pays off
Gebr. brasseler GmbH & Co. KG · ! Postfach 160 · 32631 lemgo · Germany · § Telefon: +49 (0) 5261 701-0 · $ Telefax: +49 (0) 5261 701-289 · [email protected] · www.brasseler.de
Material propertiesalloy with high gold content
< 120 HV
soft/medium hard – difficult to cut
alloy with contents of gold
120 – 160 HV
Hard/extra-hard – difficult to cut
Increased penetration resistance
reduced alloys 260 – 300 HV
slighty smearing – easy to cut
Increased heat generation
Precious metals Crown and bridge technique
1 Separating sprues
2 Eliminating sprue residues
3 Fine/ultra-fine cutting
4 Roughening veneer surfaces
5 Shaping occlusal surfaces
6 Polishing
elastic fibre-reinforced separating disc
( 20 000 rpm 9528.900.220
TC cutter with e toothing
( 15 000 rpm (< 120 +> 260 HV) H351E.104.040
( 25 000 rpm (120 – 260 HV) H71.104.010 (eliminating sprue residues)
TC cutter with UM toothing
( 15 000 rpm (< 120 +> 260 HV) H138UM.104.023
( 25 000 rpm (120 – 260HV) H77UM.104.023
TC cutter with DF toothing
( 15 000 rpm (< 120 +> 260 HV) H138DF.104.023
( 25 000 rpm (120 – 260HV)
TC finishing instrument H390E.104.016 / H390EF.104.016
( 15 000 rpm (< 120 +> 260 HV) H23RS.104.009
( 25 000 rpm (120 – 260HV) H349.104.005
( 6 000 rpm 9572.900.220/9661.000.030
(blue: universal polishing)
9614.900.220/9635.000.030
(brown: silky finish)
9624.900.220/9636.000.030
(green: high-shine finish) To b
e us
ed in
the
mic
ro m
otor
– K
10, K
9, C
N
© 1
0/20
08 ·
Geb
r. b
rass
eler
· G
erm
any
· Prin
ted
in G
erm
any
· GD
/0 ·
4023
68V3
Quality pays off
Gebr. brasseler GmbH & Co. KG · ! Postfach 160 · 32631 lemgo · Germany · § Telefon: +49 (0) 5261 701-0 · $ Telefax: +49 (0) 5261 701-289 · [email protected] · www.brasseler.de
1 Workingonstonedies
2 Cuttingsegments
3 Exposingthedowelpins
4 Trimmingmodelteeth
5 Shapingpreparationmargins
TC cutter with coarse toothing
( 15 000 rpm H79SGFA.104.070
H251GEA.104.060
Diamond disc( 10 000 rpm 6924.104.400
TC cutter
( 10 000 rpm H98.104.040
TC cutter with e toothing
( 15 000 rpm H79E.104.040
TC cutter with eF toothing
( 15 000 rpm H77EF.104.023
Tob
eus
edin
the
mic
rom
otor
–K
10,K
9,C
N
© 0
2/20
10 ·
Geb
r. b
rass
eler
· G
erm
any
· Prin
ted
in G
erm
any
· GD
/0 ·
4023
64V4
MaterialPlaster for impression taking (type I)
alabaster plaster (type II)
Hard plaster (type III)
extra hard plaster (type IV)
Materialpropertieseasy to cut
super hard plaster can easily chip when trimming
Wet plaster tends to smear
blade configuration needs to allow for easy chip removal
PlasterFabricationofmodels
402364-73VX_PI_GB_ZT_0110.indd 1 09.02.2010 12:19:37 Uhr
FIG. H251E-040-070 FIG. H77E-040-060 FIG.H79E-031-060 H261E-023 x5
Acrylic & Metal Alloy Cutter
FIG. H251EF-060 FIG. H79EF-031-040 FIG. H351E-040-070 H139EF-023 x5
KOMET
JULY-SEP 2012 VISIT YOUR LOCAL HENRY SCHEIN HALAS SHOWROOM ORDERS 1300 65 88 22 WWW.HENRYSCHEIN.COM.AU 19
KOMET
Drufomat Scan
High-quality thermo-forming units based on the well known Drufomat technique and combined with the latest material recognition software as well as outstanding design.
• The Drufomat scan offers• Scans all material related parameters by means of a barcode • Display of several lines in order to control all working steps• Simple and safe operation • Vertical contact of the foils towards the model• A variable, electronically controlled working pressure of up to 6 bars (87 psi)
By means of optionally available inserts the Drufomat scan can also be used as flask press or pressure polymerization unit.
$7500
Labormat THCompact boiling-out unit for up to 6 flasksAlso suitable for polymerisation of denture resins.• high-grade steel housing • continuously adjustable temperature from 0-95 ºC • individual spraying-time adjustment with a 6 minute timer • hand spray gun included • practical sliding lit • instantaneous button for short boiling-out
$7925
Labormat SDLarge, solid boiling-out unit for up to 12 flasksAlso suitable for polymerisation of denture resins.• high-grade steel housing • continuously adjustable temperature from 0-95 ºC • individual spraying-time adjustment with a 6 minute timer • 24-h timer • hand spray gun included • practical sliding lit • instantaneous button for short boiling-out • optionally installable or movable on castors
$9175
$7315
JULY-SEP 2012 VISIT YOUR LOCAL HENRY SCHEIN HALAS SHOWROOM ORDERS 1300 65 88 22 WWW.HENRYSCHEIN.COM.AU20
DVA
Zircon BriteA solid polish provided in a jar that can be used to polish all types of crown and bridge restorative materials including:
• Zirconium sub structure collars• Zirconium full contour restorations• Layered porcelains• IPS e.max® and Empress® restorations• All Cad/Cam generated restorations• All composite restorations
20g Jar $6040g Tub + 20 Bristle Brushes $80
Acryl MarvelA denture polish for simplifying the finishing and re-polishing of dentures that require some final adjustment.DVA’s Acryl-Marvel is a solid, bar-like material that simultaneously removes finishing and shaping scratches while inducing a high lustrous polish on acrylic dental appliances such as dentures, partial dentures, acrylic crowns, bridges and orthodontic appliances. In addition, it is extremely effective in polishing composite materials, which solves an important problem with regard to applying a high shine upon the new gingival characterizing resins like GC’s Gradia Gum, etc.
Available in:
Intro Kit: 200g Block, 20 Bits, Cloth Wheel, Calico Mop, Silicone Bur + DVD $59Combo Kit: 200g Bar + 20 Bits $55Individually Packed: 20 Bits + 20 Cloth Wheels $35100 Bits: $38
To register your interest and for more information, please email Jodi Moranda [email protected]
Courses will cover the following:• Vita VMK Master Ceramics• Vita VM9• Vita VM13• Denture Setting with Vitapan Plus /
Lingoform
VITA TRAINING COURSESVita and Henry Schein Halas will be holding numerous Ceramic and Denture Courses throughout Australia in the coming months.